SIGMA Showroom Consignment Auction

FALLAS AUTOMATION V-400 PICK AND PLACE CASE PACKER WITH: PACKED 18 COUNT BAGS OF PRODUCT IN CASES BAG WEIGHT: 16 AND 14 OUNCES LAYERS PER CASE: 6 PRODUCT DIMENSIONS: WIDTH: 7.5 INCHES HEIGHT: 2 INCHES CASE WIDTH CROSS PUSHER: 15.75 INCHES VACUUM PRESSURE: 4 INCHES OF HG VACUUM HEAD HEIGHT: 1.875 INCHES MAIN AIR SUPPLY REQUIREMENTS: 83-87 PSI ALLEN-BRADLEY CONTROL LOGIX PLC STAINLESS STEEL FRAME PREVIOUSLY USED TO PACK BAGS OF STUFFING

PEERLESS PBD 6 BREAD AND DOUGH DIVIDER WITH: STAINLESS STEEL HOPPER: 28 INCHES LONG X 26 INCHES DEPTH X 16 INCHES WIDTH ROLLER WIDTH: 28 INCHES CONVEYOR: 54 INCHES LENGTH X 12 INCHES WIDTH ALLEN BRADLEY PANEL VIEW 100 6 POCKET BREAD DIVIDER RATES: 60-180 PIECES PER MINUTE DEPENDING ON NUMBER OF HEADS, MATERIALS, AND APPLICATION PRODUCT RANGE FOR: WHITE BREADS VARIETY BREADS ETHNIC BREADS FROZEN DOUGH 6-60 OUNCES ALL DRIVEN BY HYDRAULIC CYLINDERS: FLOUR DUSTER RAM KNIFE DIVISION BOX EJECTOR HYDRAULIC PUMP

SHANKLIN F1 TORNADO WRAPPER 20" SEAL JAW - 20 SEAL JAW SELVAGE REWIND INCLUDED ON BOARD 230 VOLTS, 5.5 AMPS, 1 PHASE, 60 HERTZ S/N: F9582

BELCOR 252 CASE TAPER WITH: CASE SIZE RANGE (INCHES): LENGTH: 8 TO 20 WIDTH: 6 TO 15 HEIGHT: 4.5 TO 16 SIDE CASE TRANSFER BELTS 2 INCH WIDE TOP TAPE HEAD HAND CRANK HEIGHT AND WIDTH ADJUSTMENT MOUNTED ON CASTERS INPUT/OUTPUT HEIGHT: APPROXIMATELY 28" APPROXIMATE OVERALL DIMENSIONS (INCHES): LENGTH: 58 WIDTH: 34 HEIGHT: 66 ELECTRICAL REQUIREMENTS: PHASE 1 FREQUENCY: 60 HZ VOLTS: 120

CIRCLE HORIZONTAL FORM FILL SEAL POUCHER - FOUR SIDED POUCH FORM FILL AND SEAL HORIZONTAL WRAPPER LAST RUNNING MOIST TOWELETTE SINGLE SERVE POUCH FIBER TOWEL IS UNROLLED AND CUT INTO STRIPS, THEN FOLDED, DOSED IN SOLUTION(DOSING SYSTEM NOT INCLUDED), THEN CUT INTO FINAL SEGMENTS AND THEN WRAPPED WITH TOP AND BOTTOM FILM. WRAPPED PRODUCT THEN TRAVELS THROUGH A SERIES OF TWO SIDE SEALERS AND A PULL WHEEL. SIDE SEALERS APPLY CONSTANT PRESSURE WITH CONTROLLED HEAT. THE FIRST SEALER APPLIES A MINIMAL AMOUNT OF HEAT AS TO BE SURE NOT TO SCORCH THE WRAP. THE SECOND SEALER APPLIES MORE HEAT TO ENSURE THE SEAL IS MADE. PULL WHEELS ARE USED TO PULL AND ALIGN FILM THROUGH THE MACHINE, WHILE COOLING AND STRENGTHENING THE SIDE SEALS THE PACKAGE THEN TRAVELS THROUGH A CROSS SEALER WHICH SEALS THE REMAINING TWO SIDES. ONCE THE FOUR SIDES OF THE PACKAGE HAVE BEEN SEALED, THE PACKAGES ARE THEN SEPARATED LENGTHWISE BY A SLITTER WHICH CUTS ALONG THE SEAL. THE PACKAGES THEN TRAVEL THROUGH ANOTHER PULL WHEEL AND THROUGH THE CUT-OFF KNIFE WHICH SEPARATES THE PACKAGES IN THE CROSS DIRECTION. HORIZONTAL ORIENTATION POUCH MACHINE CONTINUOUS MOTION COMPATIBLE FILM TYPES: COLD SEAL TYVEK LAMINATES METALIZED POLY-COATED PAPER POLYPROPYLENE PREVIOUSLY USED FOR PACKAGING MOIST TOWELETTES OUTPUT: APPROXIMATELY UP TO 1,200 PACKAGES PER MINUTE ALLEN-BRADLEY TOUCHSCREEN HMI FOR MACHINE HUMAN INTERFACE STAINLESS STEEL CONTACT PARTS

ERIEZ 48-A 48"L 9"W X 56"H VIBRATORY CONVEYOR WITH: ERIEZ VIBRATORY MOTOR MODAL NUMBER 48-A SERIAL NUMBER 1113036 115 VOLTS-60 CYCLES-2.0 AMPS VIBRATORY CONVEYOR 36 INCHES LENGTH X 8.75 INCHES WIDTH X 4 INCHES DEEP INFEED ELEVATION 52 INCHES FROM GROUND ADJUSTABLE LEG HEIGHT BANNER PHOTO SWITCH EYE ADJUSTABLE VIBRATORY SPEED OUTFEED CONVEYOR ELEVATION 45 INCHES FROM GROUND STEEL CONSTRUED FRAME STAINLESS STEEL CONVEYOR

3M 12A ADJUSTABLE CASE SEALER WITH: MINIMUM BOX SIZE: 4.5 INCHES WIDE X 5.87 INCHES LONG 4.75 INCHES HIGH MAXIMUM BOX SIZE: 19.69 INCHES WIDE X 19.69 INCHES HIGH CAPACITY: SEALS UP TO 23 CASES PER MINUTE 2 INCH TOP AND BOTTOM TAPE APPLICATOR SIDE MOUNTED POWER THROUGH FEED CONVEYOR TWIN GEAR MOTOR WITH SIDE BELT DRIVES INFEED / EXIT CONVEYOR START / STOP SWITCH

MK AUTOMATION 72" LONG X 4" WIDE CONVEYOR WITH: CONVEYOR DIMENSIONS: 72 INCHES LONG X 4.75 INCHES WIDE CONVEYOR HEIGHT: 36 INCHES ALUMINUM FRAME DART VARIABLE FREQUENCY DRIVE

CINCINNATI MILACRON RHB SYSTEM 2000 BLOWMOLDER

USED AUTOMATION PACKAGING GLUE SEAL TRAY FORMER WITH: BLANKS SET TO: WIDTH: 20 INCHES LENGTH: 24 INCHES FINISHED TRAY: WIDTH: 13 INCHES LENGTH: 17 INCHES HEIGHT: 4 INCHES MELTON GLUE UNIT STAINLESS STEEL CONSTRUCTION

MARKEM IMAJE 9040 INK JET DATE CODER MACHINE WITH: DESIGNED TO PRINT ON MULTIPLE SURFACES LINES PER PRINT: UP TO 8 LINES OF TEXT CHARACTER SIZE RANGE: 0.7 TO 18.2 MILLIMETERS PRINT TYPES: LOGOS, BARCODES, ALPHANUMERIC INK TYPE: FAST DRY AND ALCOHOL-BASED POWER SUPPLY: 120 VOLTAGE / 1 PHASE / 60 HERTZ / 1.5 AMPERAGE

HAWKER POWERGUARD PS3-24-550 BATTERY CHARGER - USED HAWKER BATTERY CHARGER WITH: BATTERY TYPE: SL-A AMP. HOURS: 550 NUMBER OF CELLS: 24 CHARGE TIME: 8 HOURS INPUT AC VOLTS: 208/240/480 INPUT AC AMPS: 25/22/11 HERTZ: 60 PHASE: 3 OUTPUT DC VOLTS: 48 OUTPUT AMPS MAX: 88

USED CARDOX CYLINDER FILLING UNIT: USED IN THE TRANSFER OF LIQUID CARBON DIOXIDE INLET PRESSURE: 300 PSI DISCHARGE PRESSURE: 1000 PSI ELECTRICAL: VOLTS: 440 FREQUENCY: 60 HZ PHASE 3

CHEMTAINER POLY TANK WITH AGITATOR .75 HP BALDOR MOTOR - POLY TANK, .75 HP BALDOR MOTOR, LIGHTNIN AGITATOR

MASS FLOW ACCUMULATION CONVEYOR - USED MASS FLOW ACCUMULATION TABLE WITH: TABLE DIMENSIONS: WIDTH: 68 INCHES LENGTH: 112 INCHES HEIGHT: 48 INCHES CHAIN DRIVEN MESH CONVEYOR 2 HORSEPOWER MOTOR ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3 STAINLESS STEEL

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (6) STACKABLE ROLLING RACKS

LOT OF (7) STACKABLE ROLLING RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (8) STACKABLE ROLLING Z RACKS

LOT OF (5) MISCELLANEOUS ROLLING RACKS

SPEEDAIRE 1NNF4B 13 GAL 125 PSI AIR COMPRESSOR - RATINGS / CLASSE / CLASSIFICACION 5.5 SCFM@ 90 PSI PER IS01217 2.0 RUNNING HP PER IS01217 135 PSI MAX 13 GALLON 0,16 M3/MIN- A 621 KPA NORME IS01217 2,0 HP DE MARCHE NORME IS01217 931 KPA MAX 49,2 L 0,16 M3/MIN- A 6,21 BAR ESTANDAR IS01217 2,0 PONTENCIA TRABAJO DE HP ESTANDAR IS01217 9,31 BAR MAX 49,2 L

POWER SUPPLY, STEEL FILTER HOUSING

FOWLER ANDRE ZALKIN CA8 360 NG CAPPER COMPLETE CAPPING MACHINE - LIKE NEW, VERY LOW HOURS. LAST USED FOR PHARMACEUTICAL BOTTLE CAPPING BY "ASTRAZENECA". OEM CHANGE PART IN ORIGINAL PACKAGING. SKIDDED. ALL ELECTRICAL DRAWINGS, FULL MACHINE MANUALS, AND PARTS LISTS ARE INCLUDED IN THE SALE. AVAILABLE IN HARD COPY AND PDF FORMAT. USED PRO MACH-FOWLER-ANDRE ZALKIN CA8 360 NG CAPPER WITH: GENERAL: CAP TRANSFER STARWHEEL WITH POCKETS DRIVEN BY A "CAGE D'ECUREUIL" STARWHEEL VOGEL CENTRALIZED LUBRICATION FESTO PNEUMATIC COMPONENTS DIRECTION OF FEED: LEFT TO RIGHT STAINLESS STEEL MINIMUM SPEED: 2880 BPH MAXIMUM SPEED: 14400 BPH ELECTRICITY: 3 PHASES 480 VOLTS 60 HERTZ CONTROL VOLTAGE: 24 VOLTS CONVEYOR: CHAIN: 4 POUCES HEIGHT SLAT CHAIN LEVEL: 911 MM+/-25MM MAIN CONVEYOR SUPPLIED BY FOWLER CAP DISTRIBUTION: ORIENTOR SUPPLIED BY FOWLER AND IS FOR: CAP 45MM NCR (SCREW) PLASTIC - 51.3 X HT 18.1MM (1 THREAD) CAP 45MM ARGUS LOC (SCREW) PLASTIC - 50.4 X HT 16.3MM (1 THREAD) CAP 45MM FINE RIB (SCREW) PLASTIC - 46.8 X HT 11.2MM (1 THREAD) CAP 45MM PICTORIAL (SCREW) PLASTIC - 51.4 X HT 17.6MM (1 THREAD) CAPPING PARTS: 1 CAP CHUTE FOR 45MM NCR, ARGUS LOC, AND PICTORIAL 1 CAP CHUTE FOR 45MM FINE RIB STARWHEELS FOR ALL TYPES 8 SCREW CAPPING HEADS: BRUSHLESS FOC SE BOTTLE FEED EQUIPMENT SUPPLIED BY FOWLER: BOTTLE SIZES: SQUARE HDPE BOTTLE 200CC 57.4/57.4 X HT 88.1MM SQUARE HDPE BOTTLE 325CC 57.4/57.4 X HT 131MM MISCELLANEOUS: CAPPER SHROUD ASSEMBLY 4 MACHINE LEGS + SCREWS 2 SUPPORTS FOR PHOTOCELLS 1 BELT + 1 PULLEY "STRONGARM" PRODUCT INSPECTION CONTROL PANEL ALSO INCLUDED.

TOYO 10 STATION DUAL HEAD PREMADE POUCH FILLER W POUCH STOCKER - USED TOYO 10 HEAD PREMADE POUCH FILLER WITH: STAINLESS STEEL 21 MM DIAMETER SPOUT FILLING 10 HEADS CAPACITY: UP TO 40 POUCHES PER MINUTE MAX POUCH SIZE: WIDTH: 160 MM LENGTH: 250 MM CENTER SPOUTED POUCHES MAX FILLING RANGE: 1000CC LAST APPLICATION: POUCH SIZES: 5.5" TO 11" WEIGHT RANGES: 3.5 OZ. TO 5 LB. 25 TO 30 BAGS A MINUTE DIMENSIONS: LENGTH: 82.5 INCHES WIDTH: 157.5 INCHES HEIGHT: 67.5 INCHES ELECTRICAL: 480 VOLTS 60 HERTZ PHASE 3 PREVIOUS POUCH: 4 INCHES WIDE 7 INCHES LONG 1 INCH THREADED OPENING

HYTROL 14 INCHES WIDE X 62 INCHES LONG CONVEYOR - USED HYTROL LIVE ROLLER CONVEYOR WITH: LIVE ROLLER CONEYOR MOTOR DRIVEN ADJUSTABLE HEIGHT 14.5 INCHES WIDE X 62 INCHES LONG 3 INCH ROLLERS CENTER CURRENTLY 29 INCHES FROM THE GROUND PENTA-DRIVE AC MOTOR SPEED CONTROL RELIANCE ELECTRIC 1/2 HORSEPOWER MOTOR

ECONOCORP E2000 AUTOMATIC HORIZONTAL CARTONER WITH: SUITABLE FOR ERECTING, LOADING AND CLOSING END LOAD CARTONS PRODUCTION OUTPUT RATE: UP TO 25 CARTONS PER MINUTE, DEPENDING ON CARTON STYLE MINIMUM CARTON SIZE: LENGTH:1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES MAXIMUM CARTON SIZE: LENGTH:12 INCH WIDTH: 4 INCHES HEIGHT: 12 INCHES ELECTRICALS: VOLTAGE: 220 FREQUENCY: 60 HERTZ PHASE 1 AIR REQUIREMENTS: 3.2 CUBIC FEET PER MINUTE 80 POUNDS PER SQUARE INCH STAINLESS STEEL CONTACT PARTS

METTLER-TOLEDO SAFELINE POWERPHASEPRO METAL DETECTOR WITH: APERTURE DIMENSIONS: 23.5 INCHES WIDE X 3.5 INCHES TALL EFFECTIVE APERTURE HEIGHT: 3.25 INCHES EAGLE CLAW CONVEYOR CONVEYOR DIMENSIONS: 21 INCHES WIDE X 48 INCHES LONG INFEED HEIGHT: 33 INCHES DISCHARGE HEIGHT: 36 INCHES RETRACTING CONVEYOR PRODUCT DISCHARGE RIGHT TO LEFT PRODUCT FLOW TOUCH SCREEN HMI

BOLLING 500 M 5 TRAY REVOLVING RACK SS OVEN - USED BOLLING 5 TRAY REVOLVING RACK OVEN WITH: 5 TRAY CAPACITY, TRAY DIMENSIONS: 17 INCHES WIDE X 26 INCHES LONG, ADJUSTABLE ANALOG MINUTE TIMER, INSIDE LIGHT, STAINLESS STEEL CONSTRUCTION, OVERALL DIMENSIONS: 38 INCHES WIDE X 67 INCHES DEEP X 72 INCHES TALL

STAINLESS STEEL AUGER WASH TUB - USED SCREW AUGER WASH TUB WITH: INNER TUB DIMENSIONS: LENGTH: 158 INCHES WIDTH: 49 INCHES AUGER SCREW DIMENSIONS: DIAMETER: 48 INCHES FLIGHTS: 20.5 INCHES 16 WASH JETS 1.7 INCH DIAMETER INFUSE INLET 2 INCH DIAMETER OUTLET STAINLESS STEEL CONSTRUCTION ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3

CAPPLUS TECHNOLOGIES S403V 4" DUAL SOFTGEL ENCAPSULATION SYSTEM - CAPPLUS TECHNOLOGIES 4" DUAL SOFTGEL ENCAPSULATION SYSTEM CAPPLUS S403V SOFTGEL ENCAPSULATION MACHINE. TYPE 4" "DUAL" SPEED RATED UP TO 5 RPM VOLUME RATED UP TO 28,000 PER HOUR (ANIMAL GELATIN) DIE ROLLS 4 DIMENSION 1050MM (H) X 650MM (D) X 1800MM (W) WEIGHT 500KG POWER 220V, 3PH, 60HZ, MAX 3KW REQ. JANGLI 150L GELATIN MELTING / MIXING TANK CHILLING SYSTEM. 2 TUMBLE DRYERS. FILL MATERIAL TRANSFER TANK. STORAGE TANK. HOSES, TUBING, ENCAPSULATOR HARDWARE, DRYING RACKS/DOLLIES.

LINCOLN IMPINGER 1130 SINGLE STACK SS OVEN - USED LINCOLN IMPINGER SINGLE STACK SS OVEN WITH: TEMPERATURE RANGE: 250 TO 575 FAHRENHEIT 30 MINUTE COOK TIMER APERTURE: WIDTH: 19 INCHES HEIGHT: 3 INCHES BAKING CHAMBER: WIDTH: 19 INCHES LENGTH: 28 INCHES HEIGHT: 3 INCHES CONVEYOR: WIDTH: 19 INCHES LENGTH: 56 INCHES

ORION MA33-507 ROTARY ARM STRETCH WRAPPER WITH: FILM WIDTH: 30 INCHES CHAIN CONVEYOR SYSTEM: INFEED, WRAP STATION, AND OUTFEED SECTION CONVEYOR DIMENSIONS: 40 INCHES WIDE X 24 FEET LONG WRAP HEIGHT: 115 INCHES SENSOR FOR DETECTING OBSTRUCTION PRODUCT HEIGHT PHOTO-EYE VARIABLE SPEED CARRIAGE INDEPENDENT TOP AND BOTTOM WRAP COUNT CONTROLS ELECTRIC FILM CLAMP ASSEMBLY PERSONNEL SAFETY CAGE AROUND WRAP STATION

ENVIROPAK EG-VHD SMOKE GENERATOR STAINLESS STEEL - USED ENVIROPAK SMOKE GENERATOR WITH: AGITATED HOPPER LENGTH: 19 INCHES WIDTH: 19 INCHES DEPTH: 16 INCHES SLIDE ON LID ELECTRICAL: VOLTS: 208 FREQUENCY: 60 HZ PHASE 1 STAINLESS STEEL CONSTRUCTION

RENNCO 501 VERTICAL L-BAR SEALER WITH: OUTPUT: UP TO 30 PRODUCTS PER MINUTE DEPENDING ON PRODUCT SEALING DIMENSIONS: WIDTH: 36 INCHES HEIGHT: 15 INCHES BOTTOM CONVEYOR DISCHARGE: LENGTH: 48 INCHES WIDTH: 10 INCHES HEIGHT: 17 INCHES ELECTRICAL: VOLTS: 240 FREQUENCY: 60 HZ PHASE 1 AIR REQUIREMENT: 80 PSI

HAYSSEN ULTIMA II 2+2 DUAL LANE VERTICAL BAGGER WITH: SEAL WIDTH: 9 INCHES DUAL BAGGING HEADS FORMING TUBE DIAMETER: 5 INCHES NON REGISTERED FILM ALLEN-BRADLEY PANELVIEW 550 CONTROL PANEL NORWOOD 53LIT DATE CODERS ALLEN-BRADLEY SLC 500 CPU DISCHARGE HEIGHT: 38 INCHES HEATED BAR SEAL JAWS PREVIOUSLY RUNNING WITH ISHIDA SCALE

ROBOPAC GENESIS AUTOMATIC RING STRETCH WRAPPER WITH: RING DIAMETER: 96 INCHES FILM WIDTH: 20 INCHES 7 DUAL DRAG CHAIN CONVEYOR SECTIONS CONVEYOR DIMENSIONS: 552 INCHES LONG X 48 INCHES WIDE CHAIN WIDTH: 1 INCH 1 CHAIN DRIVEN ROLLER CONVEYOR SECTION CONVEYOR DIMENSIONS: 60 INCHES LONG X 52 INCHES WIDE 4 INCH ROLLER CENTERS CONVEYOR HEIGHT: 17 INCHES LIGHT CURTAIN SAFETY SYSTEM SOUTHWORTH PALLET LIFT UNDER WRAPPING RING 1,000 POUND LIFT CAPACITY TABLE DIMENSIONS: 36 INCHES X 36 INCHES OVERHEAD PALLET STABILIZER HOTWIRE FILM CUT-OFF MAXIMUM WRAP HEIGHT: APPROXIMATELY 100 INCHES PERSONNEL GUARDING FRANIC 5000GI CONTROLS ALLEN-BRADLEY SLC 5/04 PLC STACK LIGHT INDICATOR PRO-FACE TOUCHSCREEN AND MANUAL SWITCHES HMI

SOUTHWORTH PALLET PAL PALLET LIFT WITH: TABLE DIAMETER: 44 INCHES EXTENDED HEIGHT: 28 INCHES ROTATING TABLETOP FORKLIFT SLOTS

USED SOUTHWORTH PALLET PAL PALLET LIFT WITH: TABLE DIAMETER: 44 INCHES ROTATING TABLETOP FORKLIFT SLOTS

1988 LITTLEFORD 3000 LITER JACKETED EXPLOSION PROOF MIXER - 3000 LITER OR 105 CUFT LITTLE FORD MIXER, JACKETED, EXPLOSION PROOF, EXPLOSION PROOF MOTORS. IN WORKING ORDER, PARTS AND SUPPORT IS FULLY AVAILABLE.

SANDPIPER SB2-A DOUBLE DIAPHRAGM PUMP WITH: AIR POWERED INFEED DIAMETER: 1.75 INCHES OUTFEED DIAMETER: 2 INCHES CART MOUNTED STAINLESS STEEL CONSTRUCTION

2007 SBC BOTTLING AND CANNING MASTER TRONIC 50/50/10 MONOBLOCK FILLER CAPPER RINSER S/N: 2795 SPEED: UP TO 400 BOTTLES PER MINUTE, DEPENDING UPON APPLICATION LAST RUNNING ON 25 MILLIMETER CAPS SBC BOTTLE FILLER: PITCH: 4.44 INCHES FILLING TEMPERATURE: 1-4C 50 VALVE NECK HANDLING FILLER LAST RUNNING 12 OZ BOTTLES OF BEER