Online Timed Cannabis Hemp Equipment MultiLocation Consignment Auction Powered by A2C

CO2 TERPENE EXTRACTION SYSTEM. CO2 SEPARATION SKID: -(4) BUILT IN HEATING UNITS -JUCHE PLC CONTROL -THREE PHASE POWER SUPPLY EXTRACTION SKID: -TWO PHASE SEPARATION WITH (2) 20 L SEPARATION KETTLES -PLC PICTURED CHILLING UNIT: -FRIGEAST CONDENSING UNIT & FAN. MODEL NJQFF10Z -REFRIGERANT: R407C -STORAGE TANK FOR X CO2 PUMP: -VISUAL THERMOMETER -MODEL SHP65/25D-0.8/35 -INCLUDES MOTOR BUILT ON (SEE SPECS IN PICTURE) CO-SOLVENT PUMP: -SEE TAG FOR DETAILS. (GREEN UNIT AT THE END OF PICTURES) ALSO INCLUDED: -WALK ON PLATFORM -3 CO2 TANK RACKS -SPARE PARTS AT NO ADDITIONAL COST INCLUDING ENTIRE SECOND SYSTEM THAT IS MISSING A FEW PIECES. (FIRST SYSTEM COMPLETE)

USED HYDRION HSSB-3030 RECIRCULATING CHILLER 30 L. INFO: -CONDITION: USED TEMP RANGE: -30 DEGREES C TO ROOM TEMP (+/- 1 DEGREE C) -FLOW RATE: 25 L/MIN -COOLING CAPACITY AT 25 DEGREES C: 4600 W... ..AT 0 DEGREES C: 3500 W..... AT -20 DEGREES C: 600 W -AIR COOLED W/ PT100 TEMPERATURE SENSOR. NEW HYDRION HSSB-5020 RECIRCULATING CHILLER 50L. INFO: -CONDITION: NEW UNUSED. STILL ON ORGINAL PALLET -VOLUME: 50 L -LOWEST TEMP WITH ZERO LOAD: (DEGREES C) -24 -CHILLING POWER: 8.3KW @ 10C, 6.7KW@0C, 4.8KW @ -10C, 3.2 KW @ -20C FLOW RATE (L/MIN) 30 LIFT (M) 10 TO 12 -TEMPERATURE MIN: -20 DEGREES C -TEMPERATURE PRECISION (C) 0.2 VOLTAGE (V) 220/380 -AMBIENT TEMPERATURE (C) 25 AMBIENT HUMIDITY 60%-80% VENTILATION -DIMENSION (MM X MM X MM) 650X550X950

FILLOSOPHY CAPTAIN AUTOMATED CARTRIDGE FILLING & CAPPING SYSTEM W/ CAPTAIN AND CAPTAIN FILL UNITS CAPTAIN FILL INFO: -AUTOMATED FILLING MACHINE: RAPID FILLING -.001% ACCURACY -FOR USE WITH UNIVERSAL CARTRIDGE AND DISPOSABLE TYPES INCLUDES: -MAIN APPARATUS - (3) AIR HOSES AND POWER ADAPTERS MAKING IT READY FOR USE. FILLOSOPHY CAPTAIN AUTOMATED CARTRIDGE CAPPING MACHINE. MODEL CAPTAIN. --- CAPTAIN CAPPER INFO: -AUTOMATED CAPPING MACHING UNIVERSAL FOR ALL 510 CARTRIDGE TYPES INCLUDES: -MAIN APPARATUS -AIR HOSES AND POWER ADAPTERS MAKING IT READY FOR USE.

FILLOSOPHY CAPTAIN AUTOMATED CARTRIDGE FILLING & CAPPING SYSTEM W/ CAPTAIN AND CAPTAIN FILL UNITS. CAPTAIN FILL INFO: -AUTOMATED FILLING MACHINE: RAPID FILLING -.001% ACCURACY -FOR USE WITH UNIVERSAL CARTRIDGE AND DISPOSABLE TYPES INCLUDES: -MAIN APPARATUS - (3) AIR HOSES AND POWER ADAPTERS MAKING IT READY FOR USE. FILLOSOPHY CAPTAIN AUTOMATED CARTRIDGE CAPPING MACHINE. MODEL CAPTAIN. --- CAPTAIN CAPPER INFO: -AUTOMATED CAPPING MACHING UNIVERSAL FOR ALL 510 CARTRIDGE TYPES INCLUDES: -MAIN APPARATUS -AIR HOSES AND POWER ADAPTERS MAKING IT READY FOR USE.

FULLY AUTOMATIC "SNUS POUCH" FILLING MACHINE W/ GRINDER. SPECS & FEATURES: -PRODUCTION CAPACITY:50BAG/MIN, 30BAG/MIN -FILLS, WRAPS AND SEALS POUCHES -MEASURING:VOLUMETRIC CUP FILLER -MEASUING SCOPE:1-10G(ML) -INNER BAG SIZE:L 70-74MM W 90MM -OUTER BAG SIZE:L 120MM W 100MM -POWER: VOLTAGE: 220V -CE CERTIFICATION LOT INCLUDES: -MAIN APPARATUS -GRINDER INCLUDED -ROLLS OF PAPER FOR FILM USED IN VIDEO

LAB1ST 10L SHORT PATH DISTILLATION SYSTEM W/ COOLING CIRCULATOR & VACUUM PUMP. SPECS & FEATURES: -BOILING FLASK: 10L -HEATING TEMPERATURE: AMBIENT TO 270 DEGREES C -COOLING TEMPERATURE: 5- 85 DEGREES C -VESSEL MATERIAL: 3.3 BOROSILICATE GLASS LOT INCLUDES: -MAIN APPARTUS -COOLING CIRCULATOR. MODEL DC-05-15L -HEATING MANTLE. MODEL DM-10 -VACUUM PUMP W/ CONNECTIONS AS PICTURED

APEKS HIGH OUTPUT "THE FORCE" EXTRACTOR. MODEL 5000 20LX20L2S W/ CHILLER & DIAPHRAGM COMPRESSOR. SPECS & FEATURES: -PROCESSES APPROXIMATELY 140-200 POUNDS OF DRIED, GROUND CANNABIS IN A 24 HOUR PERIOD. DESIGNED FOR LARGE-SCALE PRODUCTION OPERATIONS. -OPTIMIZED FOR SUPERCRITICAL EXTRACTION BUT FLEXIBLE, OFFERING BOTH HIGHER AND LOWER PRESSURE SUBCRITICAL PARAMETERS. -FULLY AUTOMATED. ENERGY-EFFICIENT CLOSED LOOP SYSTEM RECOVERS 95% OF THE CO2. -FASTER EXTRACTIONS AND COLD SEPARATION PROCESSING W/DIAPHRAGM COMPRESSOR TECHNOLOGY. -VALVELESS EXPANSION TECHNOLOGY (NO CLOGGING). FLOW PATH FROM EXTRACTOR TO 1ST SEPARATOR IS CONTINUOUS DIAMETER WITH NO CONSTRICTIONS. -POWER CONSUMPTION WITH OUTDOOR CHILLER ONLY 80.1KW. LOT INCLUDES: -MAIN APPARATUS -ADVANTAGE OUTDOOR CHILLER. MODEL OACS-10S-MG-1P -DIAPHRAGM COMPRESSOR. MODEL PDC-4-1500-5000 -UL LISTED CONTROL PANEL

APEKS 5000 20L X 20L 2S HIGH OUTPUT "THE FORCE" EXTRACTION UNIT. SPECS & FEATURES: -PROCESSES APPROXIMATELY 140-200 POUNDS OF DRIED, GROUND CANNABIS IN A 24 HOUR PERIOD. DESIGNED FOR LARGE-SCALE PRODUCTION OPERATIONS. -OPTIMIZED FOR SUPERCRITICAL EXTRACTION BUT FLEXIBLE, OFFERING BOTH HIGHER AND LOWER PRESSURE SUBCRITICAL PARAMETERS. -FULLY AUTOMATED. ENERGY-EFFICIENT CLOSED LOOP SYSTEM RECOVERS 95% OF THE CO2. -FASTER EXTRACTIONS AND COLD SEPARATION PROCESSING W/DIAPHRAGM COMPRESSOR TECHNOLOGY. -VALVELESS EXPANSION TECHNOLOGY (NO CLOGGING). FLOW PATH FROM EXTRACTOR TO 1ST SEPARATOR IS CONTINUOUS DIAMETER WITH NO CONSTRICTIONS. -POWER CONSUMPTION WITH OUTDOOR CHILLER ONLY 80.1KW. LOT INCLUDES: -ADVANTAGE CHILLER. MODEL OACS-10S-MG-1P -DIAPHRAGM COMPRESSOR. MODEL PDC-4-1500-5000 -UL LISTED CONTROL PANEL

CUSTOM MADE PE-50 R134A CLOSED LOOP EXTRACTION SYSTEM SPECS & FEATURES: -SYSTEM CAN PROCESS 50-75 LBS OF BIOMASS EVERY 1 1/2-2 HOURS. -OIL COMES OUT AS AN FULL SPECTRUM OIL WITH NO SOLVENT IN THE OIL. SO YOU CAN USE IT WITHOUT ANY OTHER PROCESSING. -NONFLAMMABLE SOLVENT -LOW PRESSURE FROM 60-150 PSI RUNNING PRESSURE ON THE COMPLETE SYSTEM -SOLVENT ACCUMULATOR MADE FROM 14 THICK STAINLESS-STEEL MATERIAL. -HOLDS 5,000 LBS OF SOLVENT. ELECTRICAL: 250 AMP 3 POLE CIRCUIT BREAKER FOR INCOMING 220 VAC 3 PHASE LOT INCLUDES: -SOAK/REACTOR TANK: WILL HOLD UP TO 75 PLUS POUNDS OF BIOMASS. THIS IS THE TANK THAT SOAKS THE BIOMASS WITH THE R134A SOLVENT. THIS TANK IS ALSO MADE FROM 14 THICK STAINLESS STEEL WITH A 2 THICK STAINLESS-STEEL LID. HEATED THROUGH HEAT TAPE AND CONTROLLED THROUGH PID CLOSED LOOP CONTROLLERS (BASKET FOR THE REACTOR TANK IS 36 DIAMETER X 42 LONG). -USES FILTER BAG TO HOLD THE BIOMASS. -COLLECTOR TANK: WHERE THE SEPARATION OF THE SOLVENT AND THE OIL IS DONE. THIS TANK COLLECTS THE OIL. THIS TANK IS ALSO MADE FROM 14 THICK STAINLESS STEEL WITH A 2 THICK STAINLESS-STEEL LID. THIS TANK IS HEATED THROUGH HEAT TAPE AND CONTROLLED THROUGH PID CLOSED LOOP CONTROLLERS. ALL PIPING IS MADE FROM STAINLESS STEEL PIPE. -VACUUM PUMP: USED TO PUMP DOWN ANY TANK AND COMPLETE SYSTEM. RATED AT 100 CFM FOR A DEEP VACUUM. PARKER AIR VALVE SYSTEM ETHERNET BASED. -TURK PLC WITH 21 HMI SCREEN TURK REMOTE I/O ALL TANKS AND PIPES HAVE BOTH TEMPERATURE AND PRESSURE SENSORS. -10 HP COMPRESSOR FOR MAIN DRAW DOWN OF SOLVENT -7 12 HP SECONDARY COMPRESSOR TO DO FINAL DRAW DOWN -ACCUMULATOR TANK W/ HAS SOLVENT LEVEL SENSOR -HEAT EXCHANGER FOR THE COLLECTOR TANK

HEIDOLPH HEI-VAP INDUSTRIAL A1C ROTAVAP W/ CHILLER. MODEL HEI-CHILL 5000. INCLUDES VACUUM PUMP (HEI-VAC 20). SPECS & FEATURES: -ROTATION SPEED RANGE: 6 160 RPM -TEMP. RANGE HEATING BATH: 20 180 DEGREES C -TEMPERATURE ACCURACY PLUS/MINUS 1 DEGREES C -HEATING CAPACITY: 4,000 W -OVERHEAT CUT-OFF PROTECTIONYES -MOTOR LIFT -DISPLAY: 7" TOUCHPANEL -SUPPLY POWER: 4,600 W PROTECTION CLASS IEC 60529IP 20 -MAX. CONDENSING SURFACE1.2 M2 LOT INCLUDES: -MAIN APPARARTUS -CHILLER -VACUUM PUMP - ROTO VAC 20

CUSTOM CONES INDUSTRIAL CANNABIS GRINDER INDUSTRIAL CANNABIS GRINDER SPECS & FEATURES: -OUTPUT: 1LB PER MINUTE. CONTINUOUS GRINDING SYSTEM MEANS NO LOADING/DOWNTIME ON THE MACHINE. -GRINDER SCREEN SIZES: EXTRA-SMALL: 3MM, SMALL: 4MM DIAMETER, MEDIUM: 5.5MM DIAMETER, LARGE: 6MM DIAMETER -NO MORE DUST: FEATURES 4 SIZES OF ADJUSTABLE SCREENS, SO YOU CAN CONTROL THE PARTICLE-SIZE OF YOUR GRIND AND SAFELY HAND OVER THE GRINDING PROCESS TO ANYONE ON YOUR TEAM! -EASY TO CLEAN: GRINDER IS MADE OF STAINLESS STEEL WITH EASILY REMOVABLE PARTS FOR CLEANING AND SOAKING. -CERTIFICATION: UL LISTED POWER REQUIREMENT: 110V -SIZE: 18IN X 18IN X 12IN LOT INCLUDES: -GRINDING MOTOR WITH HANDLE - (4) GRINDING SCREENS OF DIFFERENT SIZES -GRINDING CHAMBER GRINDING CAP -4-BLADE GRINDING MECHANISM - (2) SCREW HANDLES FEEDING TRAY -CONTAINER AND LID FOR GROUND MATERIAL

ACROSS INTERNATIONAL SE130 50 LITER ROTARY EVAPORATOR. SPECS & FEATURES: -50 LITER EVAPORATING FLASK -20 LITER RECEIVING FLASK -ROTATION SPEED: 10-110 RPM -EVAPORATING SPEED: 2.4-4 GALLON PER HOUR -SINGLE CONDENSER. LOT INCUDES: -MAIN APPARATUS W/ BATH -WELCH 2052C-02 2.3 VACUUM PUMP -WATER ASPIRATOR: MODEL WVP-05

SH SCIENTIFIC R-1050 ROTARY EVAPORATOR SPECS & FEATURES: -ROTATION SPEED: 0 TO 120 RPM -POWER REQUIREMENTS: 120 W / 220 V / 50/60HZ -INCLUDES 6.5 KW HEATING BATH -INCLUDES CONDESNER (BOXED IN PICTURES) -VACUUM PUMP AND CHILLERS NOT INCLUDED

STANDARD TOOLS & EQUIPMENT CO PAINT BOOTH. APPROX 27' L X 14.5' W X 9' TALL. SPECS & FEATURES: -POWERED BY HIGH POWERED ACME FAN: MODEL HQ34 3 HP 208/230/460/3/60/TEFC NPE -ACME FAN IS POWERED BY 3 HP BALDOR MOTOR -APPROX 27' L X 14.5' W X 9' TALL.

HENAN LANPHAN INDUSTRY CO. PP-45 HEMP EXTRACTION CENTRIFUGE. SPECS & FEATURES: CAN EXTRACT 20 LBS PER BATCH W/ -80 DEGREES C OPERATING TEMPERATURE -DRUM CAPACITY OF 45 LITERS (450 MM DIA X 250 MM HEIGHT) -SPEED: 1500 RPM. -97% ALCOHOL REMOVAL W/ 98% BOTANICAL COMPOUND EFFICIENCY. -INCLUDES CONTROL PANEL AND ADDED HEAT INSULTION WRAPS. -INCLUDES 4 MICRO FILTER BAGS. -EXTRA DRIVE MOTOR INCLUDED. -ELECTRICAL: 2.2 KW. 220 VOLT/ 60HZ / SINGLE PHASE.

HENAN LANPHAN INDUSTRY LPJM 200/FFE-200 200 L SINGLE-EFFECT FALLING FILM EVAPORATOR W (2) STEAM GENERATORS AND CHILLER (PICTURED). SPECS & FEATURES: -EVAPORATION CAPACITY: 200 LITERS / HOUR. -WORKING PRESSURE OF -0.025 MPA. -HEATING TEMP: 110-130 DEGREES C. -INCLUDES EXTRA FITTINGS AND BALL VALVES. -INCLUDES (2) STEAM GENERATORS AND CHILLER (PICTURED) -HEATING POWER: 144 KW. 220 VOLT / 60 HZ / 3 PHASE.