Industrial and Support Equipment From a Major Coffee Production Facility Tanks Pumps Heat Exchangers Compressors and More

USED WESSEL AIR TANK: OVERALL DIMENSIONS: HEIGHT: 45 INCHES DIAMETER: 27 INCHES TANK DIMENSIONS: HEIGHT: 32 INCHES DIAMETER: 27 INCHES DISCHARGE DIAMETER: 1.5 INCHES

2 WHEELED METAL CARTS - USED 2 METAL CARTS ON WHEELS: CART 1 OVERALL DIMENSIONS: LENGTH: 14 INCHES WIDTH: 25 INCHES HEIGHT: 40 INCHES CART 2 OVERALL DIMENSIONS: LENGTH: 27 INCHES WIDTH: 26 INCHES HEIGHT: 43 INCHES

CART 1 OVERALL DIMENSIONS: LENGTH: 27 INCHES WIDTH:16 INCHES HEIGHT: 34 INCHES CART 2 OVERALL DIMENSIONS: LENGTH: 27 INCHES WIDTH:16 INCHES HEIGHT: 32 INCHES CART 3 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH:18 INCHES HEIGHT:34 INCHES CART 4 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH:18 INCHES HEIGHT: 34 INCHES CART 5 OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH:16 INCHES HEIGHT: 34 INCHES CART 6 OVERALL DIMENSIONS: LENGTH: 66 INCHES WIDTH: 30.5 INCHES HEIGHT: 36 INCHES

CART 1 OVERALL DIMENSIONS: LENGTH:28 INCHES WIDTH:16 INCHES HEIGHT: 35 INCHES CART 2 OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH:18 INCHES HEIGHT: 34 INCHES CART 3 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH:20 INCHES HEIGHT: 36 INCHES CART 4 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH:20 INCHES HEIGHT: 36 INCHES CART 5 OVERALL DIMENSIONS: LENGTH: 38 INCHES WIDTH:16 INCHES HEIGHT: 34 INCHES CART 6 OVERALL DIMENSIONS: LENGTH: 31 INCHES WIDTH:17 INCHES HEIGHT: 34 INCHES

CART 1 OVERALL DIMENSIONS: LENGTH:26 INCHES WIDTH: 20 INCHES HEIGHT: 29 INCHES CART 2 OVERALL DIMENSIONS: LENGTH: 24 INCHES WIDTH: 20 INCHES HEIGHT:22 INCHES CART 3 OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH:18 INCHES HEIGHT:19 INCHES CART 4 OVERALL DIMENSIONS: LENGTH: 27 INCHES WIDTH: 20 INCHES HEIGHT: 32 INCHES

USED HOPPER W VEGAVIB 61 LEVEL SENSOR WITH: TOP SIDE INLET, STAINLESS STEEL CONSTRUCTION, DOME SHAPED TOP AND CONICAL BOTTOM, BOTTOM CENTER OUTLET WITH TOP AIR OUTLET. VEGA VEGAVIB 61 VIBRATING LEVEL SWITCH: PROCESS PRESSURE: 1 TO 16 BAR, PROCESS TEMPERATURE: -50 TO 250C. ELECTRICAL REQUIREMENTS: VOLTAGE: 208/240VAC, FREQUENCY: 60HZ

THREE USED LOCKERS WITH: NINE INDIVIDUAL LOCKERS THREE PER LOCKER

STAINLESS STEEL SINK MOUNTED ON MEZZANINE WITH: STAINLESS STEEL CONSTRUCTION LENGTH: 30 INCHES WIDTH: 19 INCHES DEPTH: 19 INCHES ONE (1) DRAIN PLUG SLIP RESISTANT MEZZANINE

100 GALLON POLYTANK ON CASTER CART WITH: OVERALL DIMENSIONS: LENGTH: 33 INCHESWIDTH: 33 INCHESHEIGHT: 46 INCHES

25 INCHES LENGTH, 15 INCHES WIDTH, 18 INCHES HEIGHT HAYWARD FILTRATION MODEL 53

STYLE EUROBUCKET - (8 BOXES) USED TAPCO EUROBUCKET WITH: STYLE: 130-120

USED OFFICE DESK PHONES WITH: MODEL: 9640

SET OF 18 LOCKERS - USED SET OF LOCKERS WITH: 18 TOTAL LOCKERS 3 PER SET

SET OF (24) LOCKERS - USED SET OF LOCKERS WITH: 24 LOCKERS

2002 ATLAS COPCO GA 75 VSDFF AIR COMPRESSOR - USED ATLAS COPCO AIR COMPRESSOR WITH SMART LINK WITH: SCFM: 449 KW-HP: 100 R/MIN: 2700 KG-LB: 1800 MAXIMUM WORKING PRESSURE - BAR-PSI 188 DIMENSIONS LENGTH: 102 INCHES WIDTH: 40 INCHES HEIGHT: 72 INCHES

2002 ATLAS COPCO GA 75 VSDFF AIR COMPRESSOR WITH SMART LINK - USED ATLAS COPCO AIR COMPRESSOR WITH SMART LINK WITH: MANUFACTURER: ATLAS COPCO YEAR: 2002 MODEL: GA 75 VSDFF SCFM: 449 KW-HP: 100 R/MIN: 2700 KG-LB: 1800 MAXIMUM WORKING PRESSURE - BAR-PSI 188 DIMENSIONS LENGTH: 102 INCHES WIDTH: 40 INCHES HEIGHT: 72 INCHES

CORNING LAN CABLE SYSTEM W 13 ALLEN BRADLEY PLCS - USED CORNING LAN CABLE SYSTEM WITH: FIFTEEN ALLEN-BRADLEY PLCS

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER. SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONSIDERED PSEUDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 MANURAFCTURER: API SCHMIDT-BREITEN FLUID GROUP: 2 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER. SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONSIDERED PSEUDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES. USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 MANURAFCTURER: API SCHMIDT-BREITEN FLUID GROUP: 2 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: MANUFACTURER: SCHMIDT CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

2003 ENERQUIP TUBE AND SHELL HEAT EXCHANGER SKID WITH: THREE (3) HORIZONTALLY MOUNTED UNITS: EXCHANGER LENGTH: 80 INCHES TWO (2) VERTICAL MOUNTED UNITS: EXCHANGER LENGTH: 60 INCHES MAXIMUM WORKING PRESSURE: SHELL SIDE: 375 PSIG AT 400 DEGREES FAHRENHEIT TUBE SIDE: 375 PSIG AT 400 DEGREES FAHRENHEIT MINIMUM DESIGN METAL TEMPERATURE: SHELL SIDE: -20 DEGREES FAHRENHEIT AT 375 PSIG TUBE SIDE: -20 DEGREES FAHRENHEIT AT 375 PSIG OVERALL DIMENSIONS: LENGTH: 89 INCHES WIDTH: 47 INCHES HEIGHT: 102 INCHES

2002 SCHMIDT 149 SAL PLATE HEAT EXCHANGER: MAXIMUM ALLOWABLE WORKING PRESSURE: 87 POUNDS PER SQUARE INCH FLOW RATE: 73 GALLONS INITIAL GAGE: 385 MILLIMETERS FINAL GAGE: 369 MILLIMETERS TEMPERATURE RANGE: 5 TO 100 DEGREES CELSIUS OVERALL DIMENSIONS: LENGTH:43 INCHES WIDTH:49 INCHES HEIGHT:134 INCHES S/N: PA-80880

USED API SCHMIDT SIGMA 149 SAL PLATE HEAT EXCHANGER WITH: MODEL: SIGMA 149 SAL FLUID GROUP: 2 PRESSURE CHAMBER 1: 278 LITERS PRESSURE CHAMBER 2: 285 LITERS MAXIMUM ALLOWABLE PRESSURE: 87 POUNDS PER SQUARE INCH ALLOWABLE TEMPERATURE RANGE: 41 TO 212 DEGREES FAHRENHEIT STANDARD NOZZLES: 350 DISTANCE BETWEEN SIDE PORT HOLES: 22 INCHES DISTANCE BETWEEN TOP/BOTTOM PORT HOLES: 72 INCHES PLATE SIZE 89 H X 38 W APPROXIMATELY: 90 PLATES OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 43 INCHES HEIGHT: 136 INCHES

ENERQUIP TUBE AND SHELL HEAT EXCHANGERS - LOT OF 5. THREE (3) HORIZONTALLY MOUNTED UNITS: EXCHANGER LENGTH: 80 INCHES. TWO (2) VERTICAL MOUNTED UNITS: EXCHANGER LENGTH: 60 INCHES. MAXIMUM WORKING PRESSURE: SHELL SIDE: 375 PSIG AT 400 DEGREES FAHRENHEIT. TUBE SIDE: 375 PSIG AT 400 DEGREES FAHRENHEIT. MINIMUM DESIGN METAL TEMPERATURE: SHELL SIDE: -20 DEGREES FAHRENHEIT AT 375 PSIG. TUBE SIDE: -20 DEGREES FAHRENHEIT AT 375 PSIG.

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER. SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 MANUFACTURER: API SCHMIDT-BREITEN FLUID GROUP: 2 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

2003 ENERQUIP INC. TUBE HEAT EXCHANGER 112"L W/ PUMP. MANUFACTURER: ENERQUIP. YEAR: 2003. MAXIMUM WORKING PRESSURE SHELL SIDE: 150 POUNDS PER SQUARE INCH AT 375 DEGREES FAHRENHEIT. MAXIMUM WORKING PRESSURE TUBE SIDE: 150 POUNDS PER SQUARE INCH AT 375 DEGREES FAHRENHEIT. MINIMUM DESIGN METAL TEMPERATURE SHELL SIDE: -20 DEGREES FAHRENHEIT AT 150 POUNDS PER SQUARE INCH. MINIMUM DESIGN METAL TEMPERATURE TUBE SIDE: -20 DEGREES FAHRENHEIT AT 150 POUNDS PER SQUARE INCH. GRANDFOS PUMP MOTOR: 3450 ROTATIONS PER MINUTE. CONTROLS INCLUDED. ROSEMOUNT MAGNETIC FLOW TUBE. OVERALL DIMENSIONS: 112 LENGTH X 12 WIDTH (INCHES).

2003 ENERQUIP HEAT EXCHANGER TUBE HEAT EXCHANGER TUBE LENGTH: 11 FEET TWO (2) ARMSTRONG DOUBLE DUTY STEAM UNITS MAXIMUM WORKING PRESSURE: SHELL SIDE: 250 PSIG AT 400 DEGREES FAHRENHEIT TUBE SIDE: 460 PSIG AT 400 DEGREES FAHRENHEIT MINIMUM DESIGN METAL TEMPERATURE: SHELL SIDE: -20 DEGREES FAHRENHEIT @ 230 PSIG TUBE SIDE: -20 DEGREES FAHRENHEIT @ 460 PSIG TRAPPING CAPACITIES: 22,500 POUNDS PER HOUR PUMPING CAPACITIES: 4,800 POUNDS PER HOUR MAXIMUM ALLOWABLE WORKING PRESSURE: 200 POUNDS PER SQUARE INCH

GILES FSH-6 STAINLESS STEEL 4-STAGE VENTLESS HOOD - USED GILES VENTLESS HOOD WITH: TYPE 1 SOUND LEVEL: 73 DB USED FOR ELECTRIC EQUIPMENT DISPOSABLE CHARCOAL FILTERS 4-STAGE CLEANING PROCESS: TWO STAINLESS BAFFLE FILTERS TWO DISPOSABLE PRE-FILTERS TWO ELECTROSTATIC AIR CLEANERS TWO DISPOSABLE CHARCOAL FILTERS ELECTRICAL REQUIREMENTS: VOLTAGE: 208-240V FREQUENCY: 60 HZ CURRENT: 10 AMPS PHASE: 1 STAINLESS STEEL CONSTRUCTION

2003 MANCHESTER HORIZONTAL TANK 2560 GALLON AIR TANK - USED MANCHESTER HORIZONTAL AIR TANK WITH: CAPACITY: 2560 GALLONS MAX WORKING PRESSURE: 165 PSI AT 450 DEGREES F PAINTED STEEL CONSTRUCTION HORIZONTAL DESIGN FLOOR MOUNTING INLET/DISCHARGE DIAMETER: 12 INCHES OVERALL DIMENSIONS: LENGTH: 222 INCHES WIDTH: 78 INCHES HEIGHT: 82 INCHES LAST USED AS A COMPRESSED AIR BUFFER TANK

4750 GALLON SS INSULATED TANK - USED KUIPERS WOUDSEND B.V. 4750 GALLON INSULATED TANK WITH: CAPACITY: 4750 GALLONS INSULATED TANK MOUNTED ON LEGS: HEIGHT OFF GROUND: 31 INCHES MOTOR: 9 - 32 VDC 10.3 BAR STAINLESS STEEL CONSTRUCTION

2002 SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 700 GALLON MANUFACTURER: SCHMIDT MANHOLE: 15 INCH TANK DIMENSIONS: DIAMETER: 47 INCHES HEIGHT: 67 INCHES MANHOLE 15 INCH DIAMETER BOTTOM SIDE DISCHARGE: 2.75 INCHES SIDE HEAT EXCHANGE INFEED: 13 INCH DIAMETER TOP INFEED/ DISCHARGE : (1) 2 INCH , (1) 13 INCH, (1) 4 INCH, (1) 1/2 INCH OVERALL DIMENSIONS: DIAMETER: 48 INCHES HEIGHT: 130 INCHES

2000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 2000 GALLONS MANHOLE DIAMETER: 22 INCHES CENTER DISCHARGE: 4 INCHES TANK DIMENSIONS: DIAMETER: 82 INCHES HEIGHT: 88 INCHES MOUNTED ON STAINLESS STEEL LEGS STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: DIAMETER: 86 INCHES HEIGHT: 128 INCHES

2000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 2000 GALLONS MANWAY DIAMETER: 19 INCHES CENTER DISCHARGE: 4 INCHES MOUNTED ON STAINLESS STEEL LEGS STAINLESS STEEL CONSTRUCTION TANK DIMENSIONS: DIAMETER: 82 INCHES HEIGHT: 88 INCHES OVERALL DIMENSIONS: DIAMETER: 86 INCHES HEIGHT: 128 INCHES

2000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 2000 GALLONS MANWAY DIAMETER: 19 INCHES CENTER DISCHARGE: 4 INCHES TANK DIMENSIONS: DIAMETER: 82 INCHES HEIGHT: 88 INCHES MOUNTED ON STAINLESS STEEL LEGS STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: DIAMETER: 86 INCHES HEIGHT: 128 INCHES

USED API SCHMIDT SIGMA 149 SAL PLATE HEAT EXCHANGER WITH: MODEL: SIGMA 149 SAL FLUID GROUP: 2 PRESSURE CHAMBER 1: 278 LITERS PRESSURE CHAMBER 2: 285 LITERS MAXIMUM ALLOWABLE PRESSURE: 87 POUNDS PER SQUARE INCH ALLOWABLE TEMPERATURE RANGE: 41 TO 212 DEGREES FAHRENHEIT STANDARD NOZZLES: 350 DISTANCE BETWEEN SIDE PORT HOLES: 22 INCHES DISTANCE BETWEEN TOP/BOTTOM PORT HOLES: 72 INCHES PLATE SIZE 89 H X 38 W APPROXIMATELY: 90 PLATES OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 43 INCHES HEIGHT: 136 INCHES

2002 SCHMIDT 149 SAL PLATE HEAT EXCHANGER: MAXIMUM ALLOWABLE WORKING PRESSURE: 87 POUNDS PER SQUARE INCH FLOW RATE: 73 GALLONS INITIAL GAGE: 385 MILLIMETERS FINAL GAGE: 369 MILLIMETERS TEMPERATURE RANGE: 5 TO 100 DEGREES CELSIUS OVERALL DIMENSIONS: LENGTH:43 INCHES WIDTH:49 INCHES HEIGHT:134 INCHES S/N: PA-80879

USED BAG UNLOADER WITH: ELAN SCHHALTE HOIST CONTROLLER HOPPER DIMENSIONS 47 X 48 X 19 AT ITS HIGHEST POINT HOPPER OUTFEED 18 INCH DIAMETER OVERALL DIMENSIONS: LENGTH: 69 INCHES WIDTH: 70 INCHES HEIGHT: 120 INCHES ELECTRICAL INFORMATION: 460 VOLTS, 3 PHASE, 60 HZ

2019 SEEPEX BN2-24V CAVITY PUMP - USED SEEPEX BN CAVITY PUMP WITH: MANUFACTURER: SEEPEX YEAR: 2019 MODEL: BN UP TO 3 GPM DIMENSIONS: LENGTH: 78 INCHES DIAMETER: 12 INCHES MOTOR: 5 HP 1755 RPM OVERALL DIMENSIONS: LENGTH: 88 INCHES WIDTH: 18 INCHES HEIGHT: 24 INCHES ELECTRICAL INFORMATION: 460 VOLTS, 3 PHASE, 60 HZ

2002 SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 700 GALLON MANHOLE: 15 INCH TANK DIMENSIONS: DIAMETER: 47 INCHES HEIGHT: 67 INCHES MANHOLE 15 INCH DIAMETER BOTTOM SIDE DISCHARGE: 2.75 INCHES SIDE HEAT EXCHANGE INFEED: 13 INCH DIAMETER TOP INFEED/ DISCHARGE : (1) 2 INCH , (1) 13 INCH, (1) 4 INCH, (1) 1/2 INCH OVERALL DIMENSIONS: DIAMETER: 48 INCHES HEIGHT: 130 INCHES

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER. SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONSIDERED PSEUDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 MANUFACTURER: API SCHMIDT-BREITEN FLUID GROUP: 2 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: MANUFACTURER: SCHMIDT CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

2002 API SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER AND SCHMIDT 500 GALLON STAINLESS STEEL TANK - USED SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: MANUFACTURER: SCHMIDT CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

GRUNDFOS PUMPS WITH: 533 FEET 7.5 HORSEPOWER 30.4 GPM 3450 RPM MAX PSI - 360

ALLEN BRADLEY COMPONENTS POWER FLEX 700 CONVERT SELECT 480 OVERALL DIMENSIONS LENGTH:165 INCHES WIDTH:28 INCHES HEIGHT:85 INCHES

2 GRUNDFOS PUMPS W/ 7.5 HORSEPOWER BALDOR MOTORS: GRUNDFOS AND BALDOR MOTORS 30.4 GALLONS PER MINUTE 3450 RPM HORSEPOWER: 7.5 HORSEPOWER PUMP 1 INFEED/ DISCHARGE 1.5 INCH PUMP 2 INFEED/ DISCHARGE 2 INCH OVERALL DIMENSION: LENGTH: 26 INCHES WIDTH:20 INCHES HEIGHT: 57 INCHES ELECTRICAL INFORMATION: 230/460 VOLTS, 3 PHASE, 60 HZ

USED LARGE CONTROL PANEL WITH: ALLEN BRADLEY COMPONENTS: COBERT SELECT 480: POWER FLEX 700: OVERALL DIMENSIONS: LENGTH:124 INCHES WIDTH: 24 INCHES HEIGHT:85 INCHES

ACE 73-601 WELDING FUME VACUUM: MODEL: 73-601 OVERALL DIMENSIONS: LENGTH:52 INCHES WIDTH: 27 INCHES HEIGHT: 70 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS/ 60 HERTZ/ 13 AMPS

USED CONTROL PANEL WITH: (11) ALLEN-BRADLEY POWERFLEX 70 AC DRIVES SERIES A CAT #: 20AC5P0A0AYNANNNELECTRICAL REQUIREMENTS: 0 TO 400 VOLTS/ 50-60 HERTZ/ 3 PHASE ALLEN-BRADLEY POWERFLEX 700 AC DRIVE SERIES A CAT #: 20BD014A0AYNANA0 ELECTRICAL REQUIREMENTS: 0 TO 400 VOLTS/ 50-60 HERTZ/ 3 PHASE SEVERAL ALLEN-BRADLEY FLEXSEVERAL OTHER COMPONENTS THIS CONTROL PANEL CONTROLS THE POWER FOOD TECHNOLOGY / ODENBURG BLAST FREEZER.

2002 SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH SCHMIDT 700 GALLON STAINLESS STEEL HOLDING TANK - USED SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONISDERED PSUEDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: CAPACITY: 700 GALLON MANUFACTURER: SCHMIDT MANHOLE: 15 INCH TANK DIMENSIONS: DIAMETER: 47 INCHES HEIGHT: 67 INCHES MANHOLE 15 INCH DIAMETER BOTTOM SIDE DISCHARGE: 2.75 INCHES SIDE HEAT EXCHANGE INFEED: 13 INCH DIAMETER TOP INFEED/ DISCHARGE : (1) 2 INCH , (1) 13 INCH, (1) 4 INCH, (1) 1/2 INCH OVERALL DIMENSIONS: DIAMETER: 48 INCHES HEIGHT: 130 INCHES

2002 SCHMIDT EVAPORATION SYSTEM WITH SIGMA 90V SAL PLATE HEAT EXCHANGER. SCHMIDT EVAPORATION SYSTEMS ARE CONSTRUCTED OF STEAM AND PRODUCT PLATES, WHERE STEAM CONDENSES ON ONE SIDE OF THE PLATE WHILE PRODUCT BOILS ON THE OTHER. PLATES ARE ALIGNED IN THE SYSTEM SO THAT VERTICAL CHANNELS FORM IN A CIRCULAR SHAPE. THESE CHANNELS CAN BE CONSIDERED PSEUDO TUBES, RESULTING IN A CONSTRUCTION THAT COMBINES THE ADVANTAGES OF BOTH PLATES AND TUBES. DUE TO THE SPECIAL DESIGN OF THE UPPER PART OF THE HEAT TRANSFER SURFACE, THE HEATING STEAM IS DISTRIBUTED EVENLY OVER THE COMPLETE WIDTH OF THE PLATE. THE CROSS-SECTIONAL FLOW AREA IS THE SAME ON BOTH SIDES OF THE PLATE, WHICH ENSURES A WELL BALANCED FEED INTO THE HEATING CHANNELS. USED SCHMIDT SIGMA 90V SAL PLATE HEAT EXCHANGER WITH: CAPACITY: 500 GALLONS PRESSURE CHAMBERS: CHAMBER ONE: VOLUME: 198 LITERS, BAR: -1 TO .7 CHAMBER TWO: VOLUME: 201 LITERS, BAR: -1 TO .7 MANUFACTURER: API SCHMIDT-BREITEN FLUID GROUP: 2 APPROXIMATELY: 90 PLATES HEAT EXCHANGE PLATE SIZE: WIDTH: 38 INCHES LENGTH: 69 INCHES (4) 2 INCH INFEED/ DISCHARGE (2) 13.5 X 5 INCH INFEED / DISCHARGE (1) 6 X 22 INCH INFEED / DISCHARGE OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 39 INCHES HEIGHT: 87 INCHES USED SCHMIDT EVAPORATOR TOWER WITH: MANUFACTURER: SCHMIDT CAPACITY: 500 GALLON MANHOLE: 15 INCH SIDE INFEED/ DISCHARGE: 13 INCH BOTTOM SIDE DISCHARGE: 2.75 INCHES TOP INFEED: 13 INCHES TANK DIMENSIONS: DIAMETER: 40 INCH DIAMETER STRAIGHT WALL: 68 INCHES OVERALL DIMENSIONS: DIAMETER: 40 INCHES HEIGHT: 120 INCHES

ALFA LAVAL M15-BFG HEAT EXCHANGE WITH: MODEL: M15-BFG MANUFACTURER: ALFA LAVAL MAWP: 150 PSI AT 230 F MDMT: -20 F AT 250 PSI OVERALL DIMENSIONS: LENGTH:29 INCHES WIDTH: 30 INCHES HEIGHT:77 INCHES