Equipment Hub Metalworking Machinery Auction CNC Machining Fabrication and Shop Support Equipment
Category: CNC MACHINE CENTERS
Total Lots:
64
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2018 | HAAS | ST-20Y |
2018 HAAS ST-20Y LIVE TOOLING, Y-AXIS CNC LATHE (79 POWER-ON HOURS) S/N:3110288 SPECIFICATIONS X AXIS TRAVEL:9.3 Z AXIS TRAVEL:21 Y AXIS TRAVEL:+/- 2 SPINDLE SPEEDS:35 4,000 RPM BAR CAPACITY:2 CHUCK SIZE:8.3 HORSEPOWER:20 BMT65 TOOL POSITIONS:24 X AXIS RAPID TRAVERSE RATE:472 IPM Z AXIS RAPID TRAVERSE RATE:945 IPM Y AXIS RAPID TRAVERSE RATE:472 IPM SPINDLE NOSE:A2-6 LIVE TOOLING RPM:4,000 RPM POWER-ON HOURS:79 ELECTRICAL:230V / 3PH EQUIPPED WITH HAAS NGC CONTROL, TOOL PRESETTER, REMOTE JOG HANDLE, RIGID TAPPING, SPINDLE ORIENTATION, USER-DEFINABLE MACROS, VISUAL PART PROGRAMMING SYSTEM, 1GB MEMORY, HIGH-INTENSITY LIGHTING, 1 LIVE & 7 STATIC TOOLHOLDERS ADDITIONAL INFO THIS ST-20Y CAME FOR A TECHNICAL SCHOOL AND WAS BARELY USED.
|
🔒 Subscribe |
|
|
2018 | HAAS | VF-2SS |
2018 HAAS VF-2SS CNC VERTICAL MACHINING CENTER, VMC (41 POWER-ON HOURS) S/N:1146275 SPECIFICATIONS X, Y, Z TRAVELS:30 X 16 X 20 TABLE SIZE:36 X 14 HORSEPOWER:30 HP, INLINE DIRECT SPINDLE TAPER:CAT #40 RPM RANGE:12,000 RPM TOOL CHANGER CAPACITY:30, SIDEMOUNT RAPID RATES FOR X, Y, Z:1,400 IPM POWER-ON HOURS:41 ELECTRICAL:230V/3PH EQUIPPED WITH HAAS NGC CONTROL, WIPS (WIRELESS INTUITIVE PROBING SYSTEM), RIGID TAPPING, VISUAL PART PROGRAMMING SYSTEM, SPINDLE ORIENTATION, USER DEFINABLE MACROS, COORDINATE ROTATION AND SCALING, 1GB MEMORY, HIGH-INTENSITY LIGHTING, AUXILLARY COOLANT FILTER THIS VF-2SS CAME FROM A TECHNICAL SCHOOL AND WAS BARELY USED.
|
🔒 Subscribe |
|
|
2009 | US INDUSTRIAL | USHI-155 |
2009 US INDUSTRIAL USHI-155 155 TON DUAL STATION HYDRAULIC IRONWORKER PUNCH TONNAGE:155 PUNCHING THICKNESS:1.02 PUNCHING DIAMETER:1-1/2 THROAT DEPTH:23-5/8 STROKE LENGTH:0 TO 3-1/8 FLAT BAR SHEAR MAXIMUM THICKNESS:14 W X 1-1/4 THICK FLAT BAR MAX. LENGTH:23.5 W X 3/4 THICK FLAT BAR BLADE LENGTH:23.5 ANGLE SHEAR CAPACITY 90:7 X 7 X 5/8 BAR SHEAR ROUND:2-9/16 BAR SHEAR SQUARE:2-5/32 NOTCHER THICKNESS:5/8 NOTCHER WIDTH:2-23/64 NOTCHER DEPTH:3-15/16 MOTOR HP:20 ELECTRICAL:440V/3PH S/N:20080705
|
🔒 Subscribe |
|
|
WYSONG | H-2510 |
WYSONG H-2510 10 X 1/4 CNC HYDRAULIC POWER SQUARING SHEAR. SHEARING CAPACITY, MILD STEEL:10 X 1/4. SHEARING CAPACITY, STAINLESS STEEL:10 X 7 GA. THROAT DEPTH:3. RAKE ANGLE INCH PER FOOT:5/16. NUMBER OF HOLDDOWNS:13. STROKES PER MINUTE, FULL CAPACITY FULL LENGTH:21 SPM. STROKES PER MINUTE, FULL CAPACITY SHORT STROKE:45 SPM. STROKES PER MINUTE, REDUCED CAP FULL LENGTH:40 SPM. STROKES PER MINUTE, REDUCED CAP SHORT STROKE:60 SPM. MAIN MOTOR, HORSEPOWER:20 HP. ELECTRICAL:460V/3PH. EQUIPPED WITH WYSONG PC100 3-AXIS CNC CONTROL W/ 36 BACKGAUGE, (2) FRONT ARM SUPPORTS, MANUALS.
|
🔒 Subscribe | |
|
|
2016 | CAMFIVE | CFL-CMA6348T-IV |
2016 CAMFIVE CFL-CMA6348T-IV 100W LASER CO2 CUTTER & ENGRAVER S/N:61900 SPECIFICATIONS LASER TYPE:CO2 HIGH-TEMPERATURE RESISTANT GLASS TUBE LASER POWER:100W WORKING AREA:63 X 48 ELECTRICAL:220V/1PH EQUIPPED WITH S & A CW-5200 INDUSTRIAL CHILLER, CAMFIVE SL-2D CHILLER, CAMFIVE CFVR-8000VA VOLTAGE REGULATOR (2) EXHAUST BLOWERS, OWNERS MANUAL
|
🔒 Subscribe |
|
|
2008 | M.J. MAILLIS / WULFTEC | WCA-200 |
2008 M.J. MAILLIS / WULFTEC WCA-200 CONVEYORIZED FULLY AUTOMATIC TURNTABLE STRETCH WRAPPER S/N:53245-1-1108 MAXIMUM LOAD SIZE:48 W X 48 L X 80 H LOAD WEIGHT:4,000 LBS. CAPACITY LOADS PER HOUR:UP TO 60 ELECTRICAL:460V/3PH EQUIPPED WITH 60 INFEED & OUTFEED POWERED CONVEYORS
|
🔒 Subscribe |
|
|
SCOTCHMAN | 4014-CM |
SCOTCHMAN 4014-CM 40 TON HYDRAULIC IRONWORKER - GENERAL INFO THROAT DEPTH:6 PUNCHING TONNAGE:40 TON PUNCHING CAPACITY:1 DIAMETER IN 1/2 PLATE FLAT BAR SHEAR:14 LENGTH FLAT BAR SHEAR CAPACITY:1/2 X 6, 3/8 X 10, 1/4 X 12, 3/16 X 14 ANGLE SHEAR CAPACITY:3 X 3 X 5/16 MOTOR HP:3 ELECTRICAL:230V/3PH EQUIPPED WITH PUNCHES & DIES, CASTERS S/N:8059FF1299
|
🔒 Subscribe | |
|
|
2021 | CAMFIL | GOLD SERIES GSX4 LOWBOY |
2021 CAMFIL GOLD SERIES GSX4 LOWBOY PLASMA CUTTING DUST & FUME COLLECTOR S/N:N68989. SPECIFICATIONS: AIR VOLUME/PRESSURE:1400 C.F.M./10.0 W.G. MOTOR HP:5 AIR TO CLOTH RATIO:0.93:1 DUST TYPE:PLASMA FUMES ELECTRICAL:230V/3PH EQUIPPED WITH CAMFIL GOLD SERIES X-FLO TOUCH SCREEN CONTROLLER
|
🔒 Subscribe |
|
|
2000 | ELDORADO MEGA | M75-1041 |
2000 ELDORADO MEGA M75-1041 3/4 X 30 PRECISION DEEP HOLE GUN DRILL - GENERAL INFO SPECIFICATIONS MAXIMUM DRILLING DIAMETER:0.75 INCHES MINIMUM DRILLING DIAMETER:0.055 INCHES MAXIMUM DRILLING DEPTH:30 INCHES DRILLING FEED RATE:.1 99.9 RPM RAPID FEEDRATE:200 IPM WORK TABLE:22 X 22 HEIGHT OF SPINDLE CENTERLINE:8 INCHES STRAIGHTNESS PER 12:0.001 INCHES MAXIMUM COOLANT PRESSURE:1500 PSI RESERVOIR CAPACITY:60 GALLONS ELECTRICAL:230V/3PH EQUIPPED WITH BALL SCREW DRIVEN DRILL FEED, ELDORADO F18 MEGA FLO HIGH-PRESSURE COOLANT SYSTEM WITH FILTRATION AND HEAT EXCHANGER, BALL SCREW DRIVEN HEADSTOCK FEED SYSTEM, THUMBWHEEL FEED RATE, FEED THRUST LOAD METER, CHIP BOX, AUTOMATIC SLIDEWAY LUBRICATION, SPINDLE LOAD METER S/N:1928
|
🔒 Subscribe |
|
|
OKUMA | 762S-SB |
OKUMA 762S-SB CROWN L1060 CNC TURNING CENTER LATHE. SPECIFICATIONS MAX TURNING DIAMTER:10.63 MAX TURNING LENGTH:19.68 DISTANCE BETWEEN CENTERS:22.29 MAX BAR CAPACITY:2.05 SWING OVER BED:21.65 SWING OVER CROSS SLIDE:15.75 X AXIS TRAVEL:7.28 Z-AXIS TRAVEL:20.47 RAPID TRAVERSE X AXIS:590 IPM RAPID TRAVERSE Z AXIS:787 IPM SPINDLE BORE:2.44 SPINDLE SPEEDS:75 4200 RPM SPINDLE MOTOR HP:20 TURRET CAPACITY:12 STATIONS ELECTRICAL:220V/3PH EQUIPPED WITH OKUMA OSP-U10L CNC CONTROL, KITAGAWA 3 JAW CHUCK, 12 STATION AUTOMATIC TURRET, COOLANT SYSTEM, HENNIG CHIP CONVEYOR, ORIGINAL MANUALS
|
🔒 Subscribe | |
|
|
2019 | KAISHAN | KRSB/T-7.5-115 |
2019 KAISHAN KRSB/T-7.5-115 7.5HP ROTARY SCREW AIR COMPRESSOR W/ DRYER. CFM:23.8, DISCHARGE PRESSURE RANGE:125 PSI, MOTOR HP:7.5, TANK SIZE:120, ELECTRICAL:230V/3PH, EQUIPPED WITH 115V AIR DRYER. S/N: 051912810US01
|
🔒 Subscribe |
|
|
HYSTER | S40FTS |
HYSTER S40FTS 4,000 LB. CAPACITY FORKLIFT. SPECIFICATIONS: LOAD CAPACITY: 4,000 LBS., MAXIMUM LIFT HEIGHT: 187, FUEL: LP, TIRE: CUSHION, HOURS: 15,193. EQUIPPED WITH: FORWARD/BACKWARD TILT, SIDE SHIFT, FORKS. ***PROPANE TANK NOT INCLUDED***
|
🔒 Subscribe | |
|
|
MILLER | DELTAWELD 302 |
MILLER DELTAWELD 302 300 AMP MIG WELDER W/ 70 SERIES WIRE FEEDER. RATED INPUT:200/230/460V, 3PH. RATED OUTPUT:300A @ 44 VDC, 100% DUTY CYCLE. EQUIPPED WITH MILLER 70 SERIES 24V WIRE FEEDER, MIG GUN, GROUND CLAMP.
|
🔒 Subscribe | |
|
|
WELLSAW | 1118 |
WELLSAW 1118 13 X 18 HORIZONTAL BAND SAW ROUND CUTTING CAPACITY:13 RECTANGULAR CUTTING CAPACITY:13 X 18 BAND WHEELS:15 DIAMETER CAST IRON BLADE SIZE:1 X .035 X 150 BLADE SPEEDS:70 375 SFPM FEED CONTROL:VARIABLE HYDRAULIC / COUNTERBALANCE SPRING MOTOR HP:3 ELECTRICAL:230V/3PH EQUIPPED WITH COOLANT SYSTEM, INFINITELY VARIABLE BLADE SPEEDS, AUTO SHUT-OFF AT END OF CUT S/N:3251
|
🔒 Subscribe | |
|
|
YALE | GLP050TGEUAE084 |
YALE GLP050TGEUAE084 5,000 LB. CAPACITY LP FORKLIFT - GENERAL INFO LOAD WEIGHT CAPACITY @ 24 LOAD CENTER:4,650 LBS. MAXIMUM LOAD RAISED HEIGHT:189 TIRES:CUSHION POWER:LP HOURS:8,476.5 EQUIPPED WITH BACKWARD/FORWARD TILT, SIDE SHIFT, 4 FORKS ***PROPANE TANK DOES NOT COME WITH FORKLIFT.***
|
🔒 Subscribe | |
|
|
NORITAKE | NCS-5A/50 |
NORITAKE NCS-5A/50 AUTOMATIC CUT OFF SAW - GENERAL INFO ROUND BAR CAPACITY:10-50MM SQUARE BAR CAPACITY:10-40MM SAW MOTOR:3.7KW EQUIPPED WITH MITSUBISHI GOT 1000 CONTROL, BAR FEEDER/LOADER, CHIP AUGER, PARTS CHUTE
|
🔒 Subscribe | |
|
|
OKUMA | LNC-8T |
OKUMA LNC-8T CNC LATHE W/ BAR FEEDER, CHIP CONVEYOR X AXIS TRAVEL:6.9 Z AXIS TRAVEL:20 MAX SWING:15.75" MAX TURNING DIAMETER:9.84" MAX TURNING LENGTH:19.59" BAR CAPACITY:2 CHUCK SIZE:7 TOOL POSITIONS:12 SPINDLE NOSE:A2-6 EQUIPPED WITH LEXAIR ML-1 BAR LOADER, HENNIG CHIP CONVEYOR, TAILSTOCK W/ HYDRAULIC QUILL, 3-JAW POWER LATHE CHUCK S/N:0903E196
|
🔒 Subscribe | |
|
|
MILLER | MILLERMATIC 350P |
MILLER MILLERMATIC 350P PULSED 300 AMP MIG WELDER. SPECIFICATIONS: INPUT POWER:200/230/460V, 1 OR 3 PH, RATED OUTPUT:300 AMP @ 32 VDC, 60% DUTY CYCLE. EQUIPPED WITH: MIG GUN, GROUND CLAMP, PROSTAR FLOWMETER. S/N: LH350257B
|
🔒 Subscribe | |
|
|
2004 | HAAS | SL-30B |
2004 HAAS SL-30B BIG BORE CNC TURNING CENTER LATHE SWING:30 DISTANCE BETWEEN CENTERS:34 BAR CAPACITY:4 SPINDLE SPEED:24 2400 RPM CHUCK SIZE:15 TURRET CAPACITY:12 STATION X-AXIS TRAVEL:11.3 Z-AXIS TRAVEL:34.0 RAPID TRAVERSE X-AXIS:710 IPM RAPID TRAVERSE Z-AXIS:710 IPM SPINDLE NOSE:A2-8 ELECTRICAL:230V/3PH EQUIPPED WITH COOLANT SYSTEM, FOOT SWITCH, 15 3 JAW CHUCK S/N:69044
|
🔒 Subscribe |
|
|
COFFING | JLCMT1016 |
30 LONG 1/2 TON GANTRY CRANE W/ COFFING JLCMT1016 HOIST (2) 128 HIGH SUPPORT LEGS, 33 1/2 TON CAPACITY LONG GANTRY BRIDGE
|
🔒 Subscribe | |
|
|
OKUMA | LU15 |
OKUMA LU15 IMPACT TWIN-TURRET CNC TURNING CENTER LATHE. SWING OVER BED:20.87 SWING OVER CARRIAGE:14.96 MAX TURNING LENGTH:23.62 MAX TURNING DIAMETER:14.17 X-AXIS TRAVEL (UPPER/LOWER):10.24/5.51 Z-AXIS TRAVEL (UPPER/LOWER):25.20/24.21 SPINDLE BORE DIAMETER:2.44 RAPID TRAVERSE RATES (X/Z):591/787 IPM TOOLS (UPPER/LOWER TURRET):12/8 SPINDLE MOTOR:30/20 HP SPINDLE SPEED:45 4500 RPM ELECTRICAL:230V/3PH EQUIPPED WITH OKUMA OSP-U100L CNC CONTROL, KITAGAWA 3 JAW CHUCK, 12 POSITION UPPER & 8 POSITION LOWER TURRET, COOLANT TANK, JORGENSEN CHIP CONVEYOR S/N:1479
|
🔒 Subscribe | |
|
|
TENNSMITH | T36 |
TENNSMITH T36 36 X 16 GAUGE FOOT / STOMP SHEAR - GENERAL INFO SPECIFICATIONS TYPE:MANUAL MILD STEEL CAPACITY:16 GAUGE STAINLESS CAPACITY:20 GAUGE CUTTING LENGTH:36" S/N:06902
|
🔒 Subscribe | |
|
|
28"W X 60"H INFRARED RADIANT HEATER, ELECTRIC
|
🔒 Subscribe | |||
|
|
SCOTCHMAN | CPO-VS-350HT/PD |
SCOTCHMAN CPO-VS-350HT/PD VARIABLE SPEED PNEUMATIC 14 COLD SAW - BLADE SIZE:14, MOTOR HP:5, ELECTRICAL:460V/3PH, EQUIPPED WITH CUSTOM TABLE W/ VISE, VFD CONTROLLED VARIABLE BLADE SPEED, PUSH PALM PNEUMATIC FEED OPERATION S/N:B66140404
|
🔒 Subscribe | |
|
|
2003 | MAZAK | QTN-250 |
2003 MAZAK QTN-250 QUICK TURN NEXUS CNC TURNING CENTER LATHE. SPECIFICATIONS: MAX TURNING DIAMETER: 14.75, MAX TURNING LENGTH: 19.86, MAX BAR CAPACITY: 3.05, SWING OVER BED: 26.57, DISTANCE BETWEEN CENTERS: 29.85, X-AXIS TRAVEL: 9.0, Z-AXIS TRAVEL: 22.63, RAPID TRAVERSE X AXIS: 1181 IPM, RAPID TRAVERSE Z AXIS: 1181 IPM, SPINDLE NOSE: A2-8, SPINDLE BORE: 3.15, SPINDLE SPEED: 4000 RPM, TURRET CAPACITY: 12 STATIONS, ELECTRICAL: 480V/3PH. EQUIPPED WITH MAZAK NEXUS 640T CNC CONTROL, COOLANT SYSTEM, CHIP CONVEYOR. S/N: 163603
|
🔒 Subscribe |
|
|
6 X 4 X 6-1/4 BLACK GRANITE SURFACE INSPECTION PLATE W/ HEAVY METAL STAND. SURFACE PLATE SIZE:72 L X 48 W X 6-1/4 H. CERTIFICATION OF CALIBRATION PERFORMED JULY 2023.
|
🔒 Subscribe | |||
|
|
FEIN GRIT | GI150 |
FEIN GRIT GI150 6" BELT GRINDER SANDER W/ STAND, NOTCH UNIT. BELT SIZE: 6" X 78-3/4. RPM: 3,450. ELECTRICAL: 440V/3PH. EQUIPPED WITH FEIN GRIT GIB STAND, FEIN GRIT GIR NOTCH GRINDING UNIT, EXTRA BELTS. S/N: 2016-01.070406
|
🔒 Subscribe | |
|
|
BOSS | LS-2012 |
BOSS LS-2012 CO2 50 WATT LASER CUTTER & ENGRAVER WORK AREA:16 X 20 LASER CUTTING POWER:50 WATT ELECTRICAL:115V/1PH EQUIPPED WITH CW-3000 INDUSTRIAL CHILLER, ILLUMINATED LCD PANEL
|
🔒 Subscribe | |
|
|
ADVANCE | TERRA 4300B |
ADVANCE TERRA 4300B 46" RIDER SWEEPER SWEEP PATH: 46" MAIN BROOM DIMENSIONS: 28" X 12" SIDE BROOM LENGTH: 16.5" HOPPER CAPACITY: 2.5 CUBIC FEET FILTER SIZE: 54 SQUARE FEET BATTERIES: QNTY 4: 310 AH WET
|
🔒 Subscribe | |
|
|
ASSORTMENT OF TOP & BOTTOM PRESS BRAKE DIES, 7/8 TO 32-1/2 IN LENGTH
|
🔒 Subscribe | |||
|
|
HUOT | TOOLSCOOT |
HUOT TOOLSCOOT CART W/ ASSORTED CT40 & BT40 TOOL HOLDERS
|
🔒 Subscribe | |
|
|
MILLER | SYNCROWAVE 300 |
MILLER SYNCROWAVE 300 AC DC TIG STICK WELDER. SPECIFICATIONS: INPUT VOLTS:208/230/460, INPUT AMPERES:106/96/48, INPUT PHASE:1, RATED OUTPUT:300 AMPS @ 32 VDC, 60% DUTY CYCLE. EQUIPPED WITH MILLER FOOT PEDAL
|
🔒 Subscribe | |
|
|
JET | J-4200A |
JET J-4200A 6 X 48 BELT SANDER S/N:10060379 SPECIFICATIONS SANDING BELT SIZE:6 X 48 BELT SPEED:2850 SFPM MOTOR HP:1.5 ELECTRICAL:115V/1PH
|
🔒 Subscribe | |
|
|
LANTECH | Q SERIES |
LANTECH Q SERIES SEMI-AUTOMATIC PALLET STRETCH WRAPPING SYSTEM. SPECIFICATIONS: ELECTRICAL:115V/1PH
|
🔒 Subscribe | |
|
|
SHELDON LABORATORY / VWR | 1370GM |
SHELDON LABORATORY / VWR 1370GM MICROPROCESSOR CONTROL CONVECTION OVEN W/ STAINLESS STEEL TABLE S/N: 1000303 CAPACITY:4.8 CU.FT. (136 L) TEMPERATURE RANGE:40C TO 240C TEMPERATURE UNIFORMITY:+/- 2.0C AT 150C TEMPERATURE RECOVERY TIME:10 MIN AT 150C ELECTRICAL SPECIFICATIONS:120V, 1600W, 13.4A HEAT-UP (MIN):15 MIN. AT 150C WORKING CHAMBER INTERIOR DIMENSIONS:23 X 20 X 18 EQUIPPED WITH STAINLESS STEEL TABLE
|
🔒 Subscribe | |
|
|
ADVANCE | ADGRESSOR 3520D |
ADVANCE ADGRESSOR 3520D 35" RIDE-ON FLOOR SCRUBBER SCRUBBING PATH: 35" DISC SOLUTION & RECOVERY TANK CAPACITY: 42 GALLON MAX TRAVERSE SPEED: 4.5 MPH BRUSH SYSTEM: QNTY 3: .6HP BRUSH MOTORS BRUSH SPEED: 250 RPM BATTERY TYPE: 310 AH WET
|
🔒 Subscribe | |
|
|
KEARNEY & TRECKER MILWAUKEE | 205 SA |
KEARNEY & TRECKER MILWAUKEE 205 SA HORIZONTAL MILLING MACHINE - GENERAL INFO WORKING SURFACE OF TABLE:50 X 12 LONGITUDINAL TABLE TRAVEL:28 CROSS TABLE TRAVEL:10 VERTICAL TRAVEL OF KNEE:18 SPINDLE SPEEDS (16):25 TO 1500 RPM FEEDS (16):1/4 TO 32 IPM RAPID TRAVERSE RATE:150 IPM SPINDLE NOSE:NO. 50 MOTOR HP:5 ELECTRICAL:460V/3PH
|
🔒 Subscribe | |
|
|
JOHNSON | B |
JOHNSON B 7 X 12 HORIZONTAL BAND SAW CUTTING CAPACITY:7 X 12 MOTOR HP:1/2 ELECTRICAL:115V/1PH EQUIPPED WITH VARIABLE HYDRAULIC DOWNFEED S/N: B-10456
|
🔒 Subscribe | |
|
|
SHARS |
SHARS 6 X 8 PRECISION TOOLMAKERS VISE - JAW WIDTH: 6" MAX OPENING: 8"
|
🔒 Subscribe | ||
|
|
2011 | IEMCA | VIP 80 IC |
2011 IEMCA VIP 80 IC SHORT MAGAZINE TYPE BAR FEEDER ELECTRICAL:230V/3PH EQUIPPED WITH SIEMENS TOUCH SCREEN CONTROL PANEL, MANUALS S/N:0208450A06
|
🔒 Subscribe |
|
|
1993 | INGERSOLL RAND | DXR15 |
1993 INGERSOLL RAND DXR15 REFRIGERATED COMPRESSED AIR DRYER SPECIFICATIONS ELECTRICAL:115V/1PH S/N:933DXR2382
|
🔒 Subscribe |
|
|
REGENCY | 600TS3036S |
REGENCY 600TS3036S 36"W X 30"D X 38.5H STAINLESS STEEL TABLE W/ CASTERS. SPECIFICATIONS: WORK SURFACE DIMENSIONS: 36"W X 30"D, WORK SURFACE HEIGHT: 38.5", EQUIPPED WITH STORAGE SHELF, ROLLING CASTERS
|
🔒 Subscribe | |
|
|
7 LONG V OPENING BOTTOM PRESS BRAKE DIES (2), 163 - DIE LENGTHS:163-1/4"
|
🔒 Subscribe | |||
|
|
(2) GOOSE NECK TOP MALE PRESS BRAKE DIES, 43 & 44 LONG DIE LENGTHS:44-13/16 & 43"
|
🔒 Subscribe | |||
|
|
SERVICE ENGINEERING | 10CW |
SERVICE ENGINEERING 10CW 10 VIBRATORY PARTS FEEDER SYSTEM BOWL - GENERAL INFO BOWL SIZE:10 ELECTRICAL:120V/1PH EQUIPPED WITH VARIABLE AUTOTRANSFORMER CONTROLS FOR BOTH BOWL AND ARM, STAND
|
🔒 Subscribe | |
|
|
YALE | GLP050TGNUAE084 |
YALE GLP050TGNUAE084 ENCLOSED CAB 5,000 LB. CAPACITY LP FORKLIFT S/N:E177B23913V SPECIFICATIONS LOAD WEIGHT CAPACITY @ 24 LOAD CENTER:5,000 LBS. MAXIMUM LOAD RAISED HEIGHT:189 TIRES:CUSHION POWER:LP HOURS:3287.9 EQUIPPED WITH FORWARD/BACKWARD TILT, FORK POSITION SHIFT, 4 FORKS, ENCLOSED CAB ADDITIONAL INFO ***PROPANE TANK NO INCLUDED***
|
🔒 Subscribe | |
|
|
MILFORD | 64-FC |
MILFORD 64-FC RIVET MACHINE SPECIFICATIONS ELECTRICAL:115V/1PH S/N:2699
|
🔒 Subscribe | |
|
|
CARLTON | 4 X 11 |
CARLTON 4 X 11 RADIAL ARM DRILL - GENERAL INFO ARM LENGTH:4 COLUMN DIAMETER:11 SPINDLE SPEEDS (24):29 TO 1200 RPM FEEDS (6):.006 TO .041 IPR SPINDLE TAPER:MT5 MAIN DRIVE MOTOR:5 HP ELECTRICAL:230V/3PH EQUIPPED WITH POWER ELEVATION, POWER CLAMPING, BOX TABLE
|
🔒 Subscribe | |
|
|
MILFORD | 305 |
MILFORD 305 RIVETING MACHINE - GENERAL INFO SPECIFICATIONS MAX RIVET DIAMETER:.187 MAX RIVET LENGTH:.75 THROAT DEPTH:12 STROKE:3.5 ELECTRICAL:115V/1PH S/N:2924
|
🔒 Subscribe | |
|
|
KEARNEY & TRECKER | 307 S-12 |
KEARNEY & TRECKER 307 S-12 12 X 62-1/2 HORIZONTAL MILLING MACHINE SPECIFICATIONS TABLE SIZE:62-1/2 X 12 LONGITUDINAL TRAVEL:34 CROSS TRAVEL:12 VERTICAL KNEE TRAVEL:18 DISTANCE SPINDLE TO TABLE:0 16.625 MAX SPINDLE SPEEDS (24):25 2000 RPM LONGITUDINAL & CROSS FEEDS (16):0.25 32 IPM VERTICAL FEEDS (16):0.125 16 IPM RAPID TRAVERSE:150 IPM TAPER IN SPINDLE:#50 MAIN MOTOR HP:7.5 ELECTRICAL:240V/3PH EQUIPPED WITH TOOLING, COOLANT SYSTEM
|
🔒 Subscribe |
2018 HAAS ST-20Y
CNC MACHINE CENTERS
2018 HAAS ST-20Y LIVE TOOLING, Y-AXIS CNC LATHE (79 POWER-ON HOURS) S/N:3110288 SPECIFICATIONS X AXI...
Hammer Price:
🔒
2018 HAAS VF-2SS
CNC MACHINE CENTERS
2018 HAAS VF-2SS CNC VERTICAL MACHINING CENTER, VMC (41 POWER-ON HOURS) S/N:1146275 SPECIFICATIONS X...
Hammer Price:
🔒
2009 US INDUSTRIAL USHI-155
METALWORKING & FABRICATION EQUIPMENT
2009 US INDUSTRIAL USHI-155 155 TON DUAL STATION HYDRAULIC IRONWORKER PUNCH TONNAGE:155 PUNCHING THI...
Hammer Price:
🔒
WYSONG H-2510
METALWORKING & FABRICATION EQUIPMENT
WYSONG H-2510 10 X 1/4 CNC HYDRAULIC POWER SQUARING SHEAR. SHEARING CAPACITY, MILD STEEL:10 X 1/4. S...
Hammer Price:
🔒
2016 CAMFIVE CFL-CMA6348T-IV
LASER ETCHING & ENGRAVING EQUIPMENT
2016 CAMFIVE CFL-CMA6348T-IV 100W LASER CO2 CUTTER & ENGRAVER S/N:61900 SPECIFICATIONS LASER TYPE:CO...
Hammer Price:
🔒
2008 M.J. MAILLIS / WULFTEC WCA-200
PACKAGING EQUIPMENT
2008 M.J. MAILLIS / WULFTEC WCA-200 CONVEYORIZED FULLY AUTOMATIC TURNTABLE STRETCH WRAPPER S/N:53245...
Hammer Price:
🔒
SCOTCHMAN 4014-CM
METALWORKING & FABRICATION EQUIPMENT
SCOTCHMAN 4014-CM 40 TON HYDRAULIC IRONWORKER - GENERAL INFO THROAT DEPTH:6 PUNCHING TONNAGE:40 TON ...
Hammer Price:
🔒
2021 CAMFIL GOLD SERIES GSX4 LOWBOY
DUST COLLECTION EQUIPMENT
2021 CAMFIL GOLD SERIES GSX4 LOWBOY PLASMA CUTTING DUST & FUME COLLECTOR S/N:N68989. SPECIFICATIONS:...
Hammer Price:
🔒
2000 ELDORADO MEGA M75-1041
METALWORKING & FABRICATION EQUIPMENT
2000 ELDORADO MEGA M75-1041 3/4 X 30 PRECISION DEEP HOLE GUN DRILL - GENERAL INFO SPECIFICATIONS MAX...
Hammer Price:
🔒
OKUMA 762S-SB
CNC MACHINE CENTERS
OKUMA 762S-SB CROWN L1060 CNC TURNING CENTER LATHE. SPECIFICATIONS MAX TURNING DIAMTER:10.63 MAX TUR...
Hammer Price:
🔒
2019 KAISHAN KRSB/T-7.5-115
AIR COMPRESSORS
2019 KAISHAN KRSB/T-7.5-115 7.5HP ROTARY SCREW AIR COMPRESSOR W/ DRYER. CFM:23.8, DISCHARGE PRESSURE...
Hammer Price:
🔒
HYSTER S40FTS
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
HYSTER S40FTS 4,000 LB. CAPACITY FORKLIFT. SPECIFICATIONS: LOAD CAPACITY: 4,000 LBS., MAXIMUM LIFT H...
Hammer Price:
🔒
MILLER DELTAWELD 302
WELDING & CUTTING
MILLER DELTAWELD 302 300 AMP MIG WELDER W/ 70 SERIES WIRE FEEDER. RATED INPUT:200/230/460V, 3PH. RAT...
Hammer Price:
🔒
WELLSAW 1118
WOODWORKING EQUIPMENT
WELLSAW 1118 13 X 18 HORIZONTAL BAND SAW ROUND CUTTING CAPACITY:13 RECTANGULAR CUTTING CAPACITY:13 X...
Hammer Price:
🔒
YALE GLP050TGEUAE084
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
YALE GLP050TGEUAE084 5,000 LB. CAPACITY LP FORKLIFT - GENERAL INFO LOAD WEIGHT CAPACITY @ 24 LOAD CE...
Hammer Price:
🔒
NORITAKE NCS-5A/50
METALWORKING & FABRICATION EQUIPMENT
NORITAKE NCS-5A/50 AUTOMATIC CUT OFF SAW - GENERAL INFO ROUND BAR CAPACITY:10-50MM SQUARE BAR CAPACI...
Hammer Price:
🔒
OKUMA LNC-8T
CNC MACHINE CENTERS
OKUMA LNC-8T CNC LATHE W/ BAR FEEDER, CHIP CONVEYOR X AXIS TRAVEL:6.9 Z AXIS TRAVEL:20 MAX SWING:15....
Hammer Price:
🔒
MILLER MILLERMATIC 350P
WELDING & CUTTING
MILLER MILLERMATIC 350P PULSED 300 AMP MIG WELDER. SPECIFICATIONS: INPUT POWER:200/230/460V, 1 OR 3 ...
Hammer Price:
🔒
2004 HAAS SL-30B
CNC MACHINE CENTERS
2004 HAAS SL-30B BIG BORE CNC TURNING CENTER LATHE SWING:30 DISTANCE BETWEEN CENTERS:34 BAR CAPACITY...
Hammer Price:
🔒
COFFING JLCMT1016
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
30 LONG 1/2 TON GANTRY CRANE W/ COFFING JLCMT1016 HOIST (2) 128 HIGH SUPPORT LEGS, 33 1/2 TON CAPACI...
Hammer Price:
🔒
OKUMA LU15
CNC MACHINE CENTERS
OKUMA LU15 IMPACT TWIN-TURRET CNC TURNING CENTER LATHE. SWING OVER BED:20.87 SWING OVER CARRIAGE:14....
Hammer Price:
🔒
TENNSMITH T36
METALWORKING & FABRICATION EQUIPMENT
TENNSMITH T36 36 X 16 GAUGE FOOT / STOMP SHEAR - GENERAL INFO SPECIFICATIONS TYPE:MANUAL MILD STEEL...
Hammer Price:
🔒
INDUSTRIAL AND COOLING HEATING EQUIPMENT
28"W X 60"H INFRARED RADIANT HEATER, ELECTRIC...
Hammer Price:
🔒
SCOTCHMAN CPO-VS-350HT/PD
WOODWORKING EQUIPMENT
SCOTCHMAN CPO-VS-350HT/PD VARIABLE SPEED PNEUMATIC 14 COLD SAW - BLADE SIZE:14, MOTOR HP:5, ELECTRIC...
Hammer Price:
🔒
2003 MAZAK QTN-250
CNC MACHINE CENTERS
2003 MAZAK QTN-250 QUICK TURN NEXUS CNC TURNING CENTER LATHE. SPECIFICATIONS: MAX TURNING DIAMETER: ...
Hammer Price:
🔒
TEST, MEASUREMENT & QUALITY EQUIPMENT
6 X 4 X 6-1/4 BLACK GRANITE SURFACE INSPECTION PLATE W/ HEAVY METAL STAND. SURFACE PLATE SIZE:72 L X...
Hammer Price:
🔒
FEIN GRIT GI150
SURFACE FINISHING EQUIPMENT
FEIN GRIT GI150 6" BELT GRINDER SANDER W/ STAND, NOTCH UNIT. BELT SIZE: 6" X 78-3/4. RPM: 3,450. ELE...
Hammer Price:
🔒
BOSS LS-2012
LASER ETCHING & ENGRAVING EQUIPMENT
BOSS LS-2012 CO2 50 WATT LASER CUTTER & ENGRAVER WORK AREA:16 X 20 LASER CUTTING POWER:50 WATT ELECT...
Hammer Price:
🔒
ADVANCE TERRA 4300B
MISC
ADVANCE TERRA 4300B 46" RIDER SWEEPER SWEEP PATH: 46" MAIN BROOM DIMENSIONS: 28" X 12" SIDE BROOM LE...
Hammer Price:
🔒
PRESSES & FORMING
ASSORTMENT OF TOP & BOTTOM PRESS BRAKE DIES, 7/8 TO 32-1/2 IN LENGTH...
Hammer Price:
🔒
MILLER SYNCROWAVE 300
WELDING & CUTTING
MILLER SYNCROWAVE 300 AC DC TIG STICK WELDER. SPECIFICATIONS: INPUT VOLTS:208/230/460, INPUT AMPERES...
Hammer Price:
🔒
JET J-4200A
SURFACE FINISHING EQUIPMENT
JET J-4200A 6 X 48 BELT SANDER S/N:10060379 SPECIFICATIONS SANDING BELT SIZE:6 X 48 BELT SPEED:2850 ...
Hammer Price:
🔒
LANTECH Q SERIES
PACKAGING EQUIPMENT
LANTECH Q SERIES SEMI-AUTOMATIC PALLET STRETCH WRAPPING SYSTEM. SPECIFICATIONS: ELECTRICAL:115V/1PH...
Hammer Price:
🔒
SHELDON LABORATORY / VWR 1370GM
MISC
SHELDON LABORATORY / VWR 1370GM MICROPROCESSOR CONTROL CONVECTION OVEN W/ STAINLESS STEEL TABLE S/N:...
Hammer Price:
🔒
ADVANCE ADGRESSOR 3520D
MISC
ADVANCE ADGRESSOR 3520D 35" RIDE-ON FLOOR SCRUBBER SCRUBBING PATH: 35" DISC SOLUTION & RECOVERY TANK...
Hammer Price:
🔒
KEARNEY & TRECKER MILWAUKEE 205 SA
CNC MACHINE CENTERS
KEARNEY & TRECKER MILWAUKEE 205 SA HORIZONTAL MILLING MACHINE - GENERAL INFO WORKING SURFACE OF TABL...
Hammer Price:
🔒
JOHNSON B
WOODWORKING EQUIPMENT
JOHNSON B 7 X 12 HORIZONTAL BAND SAW CUTTING CAPACITY:7 X 12 MOTOR HP:1/2 ELECTRICAL:115V/1PH EQUIPP...
Hammer Price:
🔒
SHARS
POWER AND HAND TOOLS
SHARS 6 X 8 PRECISION TOOLMAKERS VISE - JAW WIDTH: 6" MAX OPENING: 8"...
Hammer Price:
🔒
2011 IEMCA VIP 80 IC
METALWORKING & FABRICATION EQUIPMENT
2011 IEMCA VIP 80 IC SHORT MAGAZINE TYPE BAR FEEDER ELECTRICAL:230V/3PH EQUIPPED WITH SIEMENS TOUCH ...
Hammer Price:
🔒
1993 INGERSOLL RAND DXR15
AIR COMPRESSORS
1993 INGERSOLL RAND DXR15 REFRIGERATED COMPRESSED AIR DRYER SPECIFICATIONS ELECTRICAL:115V/1PH S/N:9...
Hammer Price:
🔒
REGENCY 600TS3036S
MISC
REGENCY 600TS3036S 36"W X 30"D X 38.5H STAINLESS STEEL TABLE W/ CASTERS. SPECIFICATIONS: WORK SURFAC...
Hammer Price:
🔒
PRESSES & FORMING
7 LONG V OPENING BOTTOM PRESS BRAKE DIES (2), 163 - DIE LENGTHS:163-1/4"...
Hammer Price:
🔒
PRESSES & FORMING
(2) GOOSE NECK TOP MALE PRESS BRAKE DIES, 43 & 44 LONG DIE LENGTHS:44-13/16 & 43"...
Hammer Price:
🔒
SERVICE ENGINEERING 10CW
MISC
SERVICE ENGINEERING 10CW 10 VIBRATORY PARTS FEEDER SYSTEM BOWL - GENERAL INFO BOWL SIZE:10 ELECTRICA...
Hammer Price:
🔒
YALE GLP050TGNUAE084
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
YALE GLP050TGNUAE084 ENCLOSED CAB 5,000 LB. CAPACITY LP FORKLIFT S/N:E177B23913V SPECIFICATIONS LOAD...
Hammer Price:
🔒
MILFORD 64-FC
METALWORKING & FABRICATION EQUIPMENT
MILFORD 64-FC RIVET MACHINE SPECIFICATIONS ELECTRICAL:115V/1PH S/N:2699...
Hammer Price:
🔒
CARLTON 4 X 11
METALWORKING & FABRICATION EQUIPMENT
CARLTON 4 X 11 RADIAL ARM DRILL - GENERAL INFO ARM LENGTH:4 COLUMN DIAMETER:11 SPINDLE SPEEDS (24):2...
Hammer Price:
🔒
MILFORD 305
MISC
MILFORD 305 RIVETING MACHINE - GENERAL INFO SPECIFICATIONS MAX RIVET DIAMETER:.187 MAX RIVET LENGTH:...
Hammer Price:
🔒
KEARNEY & TRECKER 307 S-12
CNC MACHINE CENTERS
KEARNEY & TRECKER 307 S-12 12 X 62-1/2 HORIZONTAL MILLING MACHINE SPECIFICATIONS TABLE SIZE:62-1/2 X...
Hammer Price:
🔒