Gardner Competition Engines LLC

Thompson Auctioneers

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 326

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 326 lots

Year	Make	Model	Lot Description	Hammer Price
	COMEC	AUTO-I-1000 CBN	COMEC MODEL AUTO-I-1000 CBN SURFACER, MAX. LENGTH CAPACITY 39 INCH, MAX. WORKING LENGTH CAPACITY 34.250 INCH, MAX. WIDTH CAPACITY 14 INCH, MAX. HEIGHT CAPACITY 22.5 INCH, WHEEL HEAD MOTOR 3 HP, 220/1/60, WITH TOOLING CABINET S/N: A8271212 COMEC · AUTO-I-1000 CBN	🔒 Subscribe
	AMC-SCHOU	K-2000	AMC-SCHOU MODEL K-2000 CRANKSHAFT GRINDER, S/N 1059, 23 5/8 INCH X 84 INCH CAPACITY, 32 INCH X 7/8 INCH GRINDING WHEEL ON MACHINE, 27 INCH X 1 1/4 INCH ADDITIONAL WHEEL WITH HUB, (2) EXTRA WHEEL HUBS, WHEEL BALANCING STAND WITH ARBOR, (2) STEADY RESTS, (3) WHEEL DRESSERS, ARNOLD GAGES AMC-SCHOU · K-2000	🔒 Subscribe
	SUNNEN	CH-100K	SUNNEN MODEL CH-100K HORIZONTAL LINE HONE, S/N 2D1-2089, WITH SUNNEN MODEL CH-168 HONE DRIVER SUNNEN · CH-100K	🔒 Subscribe
	SUNNEN	CK-10	SUNNEN CYLINDER KING MODEL CK-10 AUTOMATIC CYLINDER HONE, S/N 1085 SUNNEN · CK-10	🔒 Subscribe
2018	ARBO	CKH-20	2018 ARBO CKH-20 DYNAMIC BALANCING MACHINE, S/N W-2072, SOFTWARE UPGRADED TO TURNER TECHONOLOGY SOFTWARE IN 2024, WITH V-6, V-8, AND SMALL ENGINE BOB WEIGHTS 2018 · ARBO · CKH-20	🔒 Subscribe
	AMPRO	PB-230-4	AMPRO MODEL PB-230-4 DUAL WHEEL SHOT BLAST CLEANING SYSTEM, S/N 383, WITH RECLAIMER AND MOUNTING HARDWARE, 230/3/60 AMPRO · PB-230-4	🔒 Subscribe
	DEPAC		DEPAC ENGINE DYNO SYSTEM, WITH STUSKA DYNAMOMETER, DOCK AND CART SYSTEM, WATER PUMP SYSTEM, EXHAUST SYSTEM, CONTROL PANEL, DEPAC SOFTWARE AND COMPUTER, BELL HOUSINGS, AND (13) SETS OF DYNO HEADERS DEPAC	🔒 Subscribe
	VAN NORMAN	438 "RAP-O-MATIC"	19XX VAN NORMAN MODEL 438 "RAP-O-MATIC" 18" X 46" CRANKSHAFT GRINDER, S/N: 438-5164-162, 24" X 7/8" GRINDING WHEEL ON MACHINE, EXTRA GRINDING WHEELS, STEADY REST, ARNOLD GAGE VAN NORMAN · 438 "RAP-O-MATIC"	🔒 Subscribe
	SUNNEN	15RY-3500H	SUNNEN MODEL 15RY-3500H LINE HONE MANDREL, 3.500" - 4.00" SUNNEN · 15RY-3500H	🔒 Subscribe
	KWIK-WAY	MASTER HEAD SHOP	KWIK-WAY MASTER HEAD SHOP VALVE GUIDE AND SEAT MACHINE, POWER COLUMN, 16 INCH COLUMN TRAVEL, 31 INCH LONG HEAD MAX. CAPACITY, 4MT SPINDLE, 230/3/60, 4-DRAWER CABINET WITH TOOLING, S/N 324138 KWIK-WAY · MASTER HEAD SHOP	🔒 Subscribe
	SUNNEN	10RY-2700G	SUNNEN MODEL 10RY-2700G LINE HONE MANDREL, 2.700 TO 3.000 INCH SUNNEN · 10RY-2700G	🔒 Subscribe
	KANSAS INSTRUMENTS	BK-17	KANSAS INSTRUMENTS MODEL BK-17 BAKE-KLEAN OVEN, GAS FIRED, 31" W X 40" DEEP X 19" H WORKING AREA, 750 DEGREE MAX. TEMPERATURE, MACHINE WEIGHT 1,150 LBS. S/N: 24153 KANSAS INSTRUMENTS · BK-17	🔒 Subscribe
	VAN NORMAN	777S	19XX VAN NORMAN MODEL 777S "PER-FECT-O" BORING BAR, WITH TABLES AND FIXTURES, 110/1/60 S/N: SH-8395 VAN NORMAN · 777S	🔒 Subscribe
	SUNNEN	10RY-3000H	SUNNEN MODEL 10RY-3000H LINE HONE MANDRELL, 3.00 TO 3.500 INCH SUNNEN · 10RY-3000H	🔒 Subscribe
	KWIK-WAY	SVS-D	KWIK-WAY MODEL SVS-D VALVE REFACER, 110/1/60, WITH CABINET S/N: 12094 KWIK-WAY · SVS-D	🔒 Subscribe
	SUNNEN	10RY-2400G	SUNNEN MODEL 10RY-2400G LINE HONE MANDREL, 2.400 TO 2.700 INCH SUNNEN · 10RY-2400G	🔒 Subscribe
	SUNNEN	10RY-2100F	SUNNEN MODEL 10RY-2100F LINE HONE MANDREL, 2.100 TO 2.400 INCH SUNNEN · 10RY-2100F	🔒 Subscribe
	KWIK-WAY	213	2000 KWIK-WAY MODEL 213 JET SPRAY ELECTRIC HEATED PARTS WASHER, 230/3/60, 26 INCH DIAMETER TURNTABLE, 32 INCH MAX. WORK HEIGHT, 500 LB. MAX. LOAD LIMIT S/N: E04-213-1225 KWIK-WAY · 213	🔒 Subscribe
	SUPER FLOW	SF-300	SUPER FLOW MODEL SF-300 FLOW BENCH, FLOW RANGE 25-400 CFM, 220/1/60 SUPER FLOW · SF-300	🔒 Subscribe
	KWIK-WAY	860T	KWIK-WAY MODEL 860T SURFACER, S/N 1189, UPGRADED TO CBN CUTTER HEAD, WHEELHEAD RAILS REGROUND IN 2019, WITH FIXTURES AND HARDWARE, 50" LENGTH CAPACITY, 15 1/2" WIDTH CAPACITY, 27" WORK HEIGHT CAPACITY, 7.5 HP WHEELHEAD MOTOR, 230/3/60, MACHINE WEIGHT 4,500 LBS. KWIK-WAY · 860T	🔒 Subscribe
	TOBIN-ARP	TA14	TOBIN-ARP MODEL TA14 LINE BORING MACHINE, S/N 341205 TOBIN-ARP · TA14	🔒 Subscribe
	SOUTH BEND	16" X 48"	16" X 48" ENGINE LATHE, 8" 3-JAW CHUCK, 4-WAY TOOLPOST, 5C LEVER COLLET CHUCK AND 5C COLLETS, (2) STEADY RESTS, 230/3/60, S/N 5656HKT10 SOUTH BEND · 16" X 48"	🔒 Subscribe
	KANSAS INSTRUMENTS	ALOV-89	KANSAS INSTRUMENTS MODEL ALOV-89 ELECTRIC HEAT TREAT CONVECTION BATCH OVEN, S/N 25744, INSIDE DIMENSIONS 32" W X 15" DEEP X 13" H, MAX. TEMPERATURE 400 DEGREE, 230/1/60 KANSAS INSTRUMENTS · ALOV-89	🔒 Subscribe
	SIOUX	1650	SIOUX MODEL 1650 CYLINDER HEAD WORK CENTER, WITH TOOLS SIOUX · 1650	🔒 Subscribe
	TRICK FLOW	255 LS3	(1) PAIR OF REBUILT TRICK FLOW 255, LS3 ALUMINUM CNC HEADS WITH TRICK FLOW ROCKER STANDS, BOLTS AND STUDS, AND EXTRA SPRINGS AND ROCKER ARMS TRICK FLOW · 255 LS3	🔒 Subscribe
	BHJ PRODUCTS	ORG-3	BHJ PRODUCTS MODEL ORG-3 O-RING GROOVE CUTTER SET, WITH BHJ #ORP-CMN-B AND ORP-FO-6.0-PS O-RING REGISTER PLATES BHJ PRODUCTS · ORG-3	🔒 Subscribe
	BRIDGEPORT	STEP PULLEY VERTICAL MILL	BRIDGEPORT 1 HP, STEP PULLEY VERTICAL MILL, S/N 12BR59128, 9 X 42 INCH TABLE, R-8 TOOLING, MILL CLAMP SET, 230/3/60 BRIDGEPORT · STEP PULLEY VERTICAL MILL	🔒 Subscribe
	DELTA	6000	DELTA 6000 UNIVERSAL PRESSURE TESTER, WITH ACCESSORIES DELTA · 6000	🔒 Subscribe
	SUNNEN	MA	SUNNEN MODEL MA PRECISION HONE, S/N 8251, WITH SUNNEN MODEL AG-300 PRECISION CLEARANCE GAGE SUNNEN · MA	🔒 Subscribe
	SUNNEN	CRG-750K	SUNNEN MODEL CRG-750K HEAVY DUTY CAP AND ROD GRINDER, 110/1/60, WITH CART S/N: 16092 SUNNEN · CRG-750K	🔒 Subscribe
	DART	IRON EAGLE	(1) PAIR OF DART IRON EAGLE HEAD ASSEMBLIES, BBC RECTANGULAR PART, ROLLER SPRINGS INSTALLED AT 1.900, .750 INCH MAX. LIFT, FRESH VALVE JOB AND SEALS, 2.250/1.880 INCH DART · IRON EAGLE	🔒 Subscribe
	BHJ PRODUCTS	CBT-1	BHJ PRODUCTS CBT-1 CAM BEARING INSTALLATION TOOL KIT BHJ PRODUCTS · CBT-1	🔒 Subscribe
			CUSTOM BUILT POLISHING LATHE, WITH HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60	🔒 Subscribe
			RACK WITH HONE MANDRELS	🔒 Subscribe
	SUNNEN	P-300	SUNNEN P-300 VALVE GUIDE GAGE SET SUNNEN · P-300	🔒 Subscribe
	BHJ PRODUCTS	PV-1B	BHJ PRODUCTS PV-1B COMPOUND ANGLE PISTON VISE BHJ PRODUCTS · PV-1B	🔒 Subscribe
	ACCU-TURN	8922	ACCU-TURN MODEL 8922 COMBINATION BRAKE LATHE, 110/1/60 ACCU-TURN · 8922	🔒 Subscribe
	SUNNEN	GR-2245	2"-6" RANGE SUNNEN GR-2245 RETRACTABLE DIAL BORE GAGE SUNNEN · GR-2245	🔒 Subscribe
			HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60	🔒 Subscribe
	STORM VULCAN	MARK II JET CLEAN	GAS FIRED HEATED PARTS WASHER, WORK SPACE 27" W X 36" H X 27" DEEP, 27" DIAMETER TURNTABLE, MACHINE WEIGHT 2,100 LBS. STORM VULCAN · MARK II JET CLEAN	🔒 Subscribe
	SUNNEN	CF-1000	SUNNEN CF-1000 GAGE SETTING FIXTURE SUNNEN · CF-1000	🔒 Subscribe
			HONE MANDRELS	🔒 Subscribe
	SUNNEN	HONALL	SUNNEN HONALL KIT, WITH 3/8", 11/32", 5/16", 7 MM, AND 6 MM MANDRELS SUNNEN · HONALL	🔒 Subscribe
	ECON-O-LINE	RA-48-2	ECON-O-LINE MODEL RA-48-2 DRY BLAST CABINET, S/N E-80-728, WITH RECLAIMER ECON-O-LINE · RA-48-2	🔒 Subscribe
	ENERPAC	PER-3032	HYDRAULIC H-FRAME PIN PRESS WITH ENERPAC MODEL PER-3032 HYDRAULIC POWER UNIT, 110/1/60, WITH SUNNEN PIN PRESS TOOL KIT ENERPAC · PER-3032	🔒 Subscribe
	MILLER	SYNCHROWAVE 300	MILLER SYNCHROWAVE 300 TIG WELDER, S/N JE800258, WITH COOLMATE 12 CHILLER, FOOT PEDAL CONTROL, TIG WIRE, WELDING SUPPLIES, WELDING TABLE, TANK AND REGULATORS, 200/230/460/1/60 MILLER · SYNCHROWAVE 300	🔒 Subscribe
	DODGE	V10	REBUILT DODGE V10 SHORT BLOCK INCLUDING ENGINE PARTS ON THE SHELVES DODGE · V10	🔒 Subscribe
			GAS ROD HEATER, PROPANE, WITH TANK AND CART	🔒 Subscribe
	VAN NORMAN	777	VAN NORMAN MODEL 777 "PER-FECT-O" BORING BAR, PARTS MACHINE VAN NORMAN · 777	🔒 Subscribe
			(7) SHELVES, INCLUDING MAIN BEARINGS, CAM BEARINGS, AND ROD BEARINGS	🔒 Subscribe

Year	Make	Model	Description	Price
	COMEC	AUTO-I-1000 CBN	COMEC MODEL AUTO-I-1000 CBN SURFACER, MAX. LENGTH CAPACITY 39 INCH, MAX. WORKING LENGTH CAPACITY 34.250 INCH, MAX. WIDTH CAPACITY 14 INCH, MAX. HEIGHT CAPACITY 22.5 INCH, WHEEL HEAD MOTOR 3 HP, 220/1/60, WITH TOOLING CABINET S/N: A8271212	🔒 Subscribe
	AMC-SCHOU	K-2000	AMC-SCHOU MODEL K-2000 CRANKSHAFT GRINDER, S/N 1059, 23 5/8 INCH X 84 INCH CAPACITY, 32 INCH X 7/8 INCH GRINDING WHEEL ON MACHINE, 27 INCH X 1 1/4 INCH ADDITIONAL WHEEL WITH HUB, (2) EXTRA WHEEL HUBS, WHEEL BALANCING STAND WITH ARBOR, (2) STEADY RESTS, (3) WHEEL DRESSERS, ARNOLD GAGES	🔒 Subscribe
	SUNNEN	CH-100K	SUNNEN MODEL CH-100K HORIZONTAL LINE HONE, S/N 2D1-2089, WITH SUNNEN MODEL CH-168 HONE DRIVER	🔒 Subscribe
	SUNNEN	CK-10	SUNNEN CYLINDER KING MODEL CK-10 AUTOMATIC CYLINDER HONE, S/N 1085	🔒 Subscribe
2018	ARBO	CKH-20	2018 ARBO CKH-20 DYNAMIC BALANCING MACHINE, S/N W-2072, SOFTWARE UPGRADED TO TURNER TECHONOLOGY SOFTWARE IN 2024, WITH V-6, V-8, AND SMALL ENGINE BOB WEIGHTS	🔒 Subscribe
	AMPRO	PB-230-4	AMPRO MODEL PB-230-4 DUAL WHEEL SHOT BLAST CLEANING SYSTEM, S/N 383, WITH RECLAIMER AND MOUNTING HARDWARE, 230/3/60	🔒 Subscribe
	DEPAC		DEPAC ENGINE DYNO SYSTEM, WITH STUSKA DYNAMOMETER, DOCK AND CART SYSTEM, WATER PUMP SYSTEM, EXHAUST SYSTEM, CONTROL PANEL, DEPAC SOFTWARE AND COMPUTER, BELL HOUSINGS, AND (13) SETS OF DYNO HEADERS	🔒 Subscribe
	VAN NORMAN	438 "RAP-O-MATIC"	19XX VAN NORMAN MODEL 438 "RAP-O-MATIC" 18" X 46" CRANKSHAFT GRINDER, S/N: 438-5164-162, 24" X 7/8" GRINDING WHEEL ON MACHINE, EXTRA GRINDING WHEELS, STEADY REST, ARNOLD GAGE	🔒 Subscribe
	SUNNEN	15RY-3500H	SUNNEN MODEL 15RY-3500H LINE HONE MANDREL, 3.500" - 4.00"	🔒 Subscribe
	KWIK-WAY	MASTER HEAD SHOP	KWIK-WAY MASTER HEAD SHOP VALVE GUIDE AND SEAT MACHINE, POWER COLUMN, 16 INCH COLUMN TRAVEL, 31 INCH LONG HEAD MAX. CAPACITY, 4MT SPINDLE, 230/3/60, 4-DRAWER CABINET WITH TOOLING, S/N 324138	🔒 Subscribe
	SUNNEN	10RY-2700G	SUNNEN MODEL 10RY-2700G LINE HONE MANDREL, 2.700 TO 3.000 INCH	🔒 Subscribe
	KANSAS INSTRUMENTS	BK-17	KANSAS INSTRUMENTS MODEL BK-17 BAKE-KLEAN OVEN, GAS FIRED, 31" W X 40" DEEP X 19" H WORKING AREA, 750 DEGREE MAX. TEMPERATURE, MACHINE WEIGHT 1,150 LBS. S/N: 24153	🔒 Subscribe
	VAN NORMAN	777S	19XX VAN NORMAN MODEL 777S "PER-FECT-O" BORING BAR, WITH TABLES AND FIXTURES, 110/1/60 S/N: SH-8395	🔒 Subscribe
	SUNNEN	10RY-3000H	SUNNEN MODEL 10RY-3000H LINE HONE MANDRELL, 3.00 TO 3.500 INCH	🔒 Subscribe
	KWIK-WAY	SVS-D	KWIK-WAY MODEL SVS-D VALVE REFACER, 110/1/60, WITH CABINET S/N: 12094	🔒 Subscribe
	SUNNEN	10RY-2400G	SUNNEN MODEL 10RY-2400G LINE HONE MANDREL, 2.400 TO 2.700 INCH	🔒 Subscribe
	SUNNEN	10RY-2100F	SUNNEN MODEL 10RY-2100F LINE HONE MANDREL, 2.100 TO 2.400 INCH	🔒 Subscribe
	KWIK-WAY	213	2000 KWIK-WAY MODEL 213 JET SPRAY ELECTRIC HEATED PARTS WASHER, 230/3/60, 26 INCH DIAMETER TURNTABLE, 32 INCH MAX. WORK HEIGHT, 500 LB. MAX. LOAD LIMIT S/N: E04-213-1225	🔒 Subscribe
	SUPER FLOW	SF-300	SUPER FLOW MODEL SF-300 FLOW BENCH, FLOW RANGE 25-400 CFM, 220/1/60	🔒 Subscribe
	KWIK-WAY	860T	KWIK-WAY MODEL 860T SURFACER, S/N 1189, UPGRADED TO CBN CUTTER HEAD, WHEELHEAD RAILS REGROUND IN 2019, WITH FIXTURES AND HARDWARE, 50" LENGTH CAPACITY, 15 1/2" WIDTH CAPACITY, 27" WORK HEIGHT CAPACITY, 7.5 HP WHEELHEAD MOTOR, 230/3/60, MACHINE WEIGHT 4,500 LBS.	🔒 Subscribe
	TOBIN-ARP	TA14	TOBIN-ARP MODEL TA14 LINE BORING MACHINE, S/N 341205	🔒 Subscribe
	SOUTH BEND	16" X 48"	16" X 48" ENGINE LATHE, 8" 3-JAW CHUCK, 4-WAY TOOLPOST, 5C LEVER COLLET CHUCK AND 5C COLLETS, (2) STEADY RESTS, 230/3/60, S/N 5656HKT10	🔒 Subscribe
	KANSAS INSTRUMENTS	ALOV-89	KANSAS INSTRUMENTS MODEL ALOV-89 ELECTRIC HEAT TREAT CONVECTION BATCH OVEN, S/N 25744, INSIDE DIMENSIONS 32" W X 15" DEEP X 13" H, MAX. TEMPERATURE 400 DEGREE, 230/1/60	🔒 Subscribe
	SIOUX	1650	SIOUX MODEL 1650 CYLINDER HEAD WORK CENTER, WITH TOOLS	🔒 Subscribe
	TRICK FLOW	255 LS3	(1) PAIR OF REBUILT TRICK FLOW 255, LS3 ALUMINUM CNC HEADS WITH TRICK FLOW ROCKER STANDS, BOLTS AND STUDS, AND EXTRA SPRINGS AND ROCKER ARMS	🔒 Subscribe
	BHJ PRODUCTS	ORG-3	BHJ PRODUCTS MODEL ORG-3 O-RING GROOVE CUTTER SET, WITH BHJ #ORP-CMN-B AND ORP-FO-6.0-PS O-RING REGISTER PLATES	🔒 Subscribe
	BRIDGEPORT	STEP PULLEY VERTICAL MILL	BRIDGEPORT 1 HP, STEP PULLEY VERTICAL MILL, S/N 12BR59128, 9 X 42 INCH TABLE, R-8 TOOLING, MILL CLAMP SET, 230/3/60	🔒 Subscribe
	DELTA	6000	DELTA 6000 UNIVERSAL PRESSURE TESTER, WITH ACCESSORIES	🔒 Subscribe
	SUNNEN	MA	SUNNEN MODEL MA PRECISION HONE, S/N 8251, WITH SUNNEN MODEL AG-300 PRECISION CLEARANCE GAGE	🔒 Subscribe
	SUNNEN	CRG-750K	SUNNEN MODEL CRG-750K HEAVY DUTY CAP AND ROD GRINDER, 110/1/60, WITH CART S/N: 16092	🔒 Subscribe
	DART	IRON EAGLE	(1) PAIR OF DART IRON EAGLE HEAD ASSEMBLIES, BBC RECTANGULAR PART, ROLLER SPRINGS INSTALLED AT 1.900, .750 INCH MAX. LIFT, FRESH VALVE JOB AND SEALS, 2.250/1.880 INCH	🔒 Subscribe
	BHJ PRODUCTS	CBT-1	BHJ PRODUCTS CBT-1 CAM BEARING INSTALLATION TOOL KIT	🔒 Subscribe
			CUSTOM BUILT POLISHING LATHE, WITH HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60	🔒 Subscribe
			RACK WITH HONE MANDRELS	🔒 Subscribe
	SUNNEN	P-300	SUNNEN P-300 VALVE GUIDE GAGE SET	🔒 Subscribe
	BHJ PRODUCTS	PV-1B	BHJ PRODUCTS PV-1B COMPOUND ANGLE PISTON VISE	🔒 Subscribe
	ACCU-TURN	8922	ACCU-TURN MODEL 8922 COMBINATION BRAKE LATHE, 110/1/60	🔒 Subscribe
	SUNNEN	GR-2245	2"-6" RANGE SUNNEN GR-2245 RETRACTABLE DIAL BORE GAGE	🔒 Subscribe
			HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60	🔒 Subscribe
	STORM VULCAN	MARK II JET CLEAN	GAS FIRED HEATED PARTS WASHER, WORK SPACE 27" W X 36" H X 27" DEEP, 27" DIAMETER TURNTABLE, MACHINE WEIGHT 2,100 LBS.	🔒 Subscribe
	SUNNEN	CF-1000	SUNNEN CF-1000 GAGE SETTING FIXTURE	🔒 Subscribe
			HONE MANDRELS	🔒 Subscribe
	SUNNEN	HONALL	SUNNEN HONALL KIT, WITH 3/8", 11/32", 5/16", 7 MM, AND 6 MM MANDRELS	🔒 Subscribe
	ECON-O-LINE	RA-48-2	ECON-O-LINE MODEL RA-48-2 DRY BLAST CABINET, S/N E-80-728, WITH RECLAIMER	🔒 Subscribe
	ENERPAC	PER-3032	HYDRAULIC H-FRAME PIN PRESS WITH ENERPAC MODEL PER-3032 HYDRAULIC POWER UNIT, 110/1/60, WITH SUNNEN PIN PRESS TOOL KIT	🔒 Subscribe
	MILLER	SYNCHROWAVE 300	MILLER SYNCHROWAVE 300 TIG WELDER, S/N JE800258, WITH COOLMATE 12 CHILLER, FOOT PEDAL CONTROL, TIG WIRE, WELDING SUPPLIES, WELDING TABLE, TANK AND REGULATORS, 200/230/460/1/60	🔒 Subscribe
	DODGE	V10	REBUILT DODGE V10 SHORT BLOCK INCLUDING ENGINE PARTS ON THE SHELVES	🔒 Subscribe
			GAS ROD HEATER, PROPANE, WITH TANK AND CART	🔒 Subscribe
	VAN NORMAN	777	VAN NORMAN MODEL 777 "PER-FECT-O" BORING BAR, PARTS MACHINE	🔒 Subscribe
			(7) SHELVES, INCLUDING MAIN BEARINGS, CAM BEARINGS, AND ROD BEARINGS	🔒 Subscribe

COMEC AUTO-I-1000 CBN

COMEC MODEL AUTO-I-1000 CBN SURFACER, MAX. LENGTH CAPACITY 39 INCH, MAX. WORKING LENGTH CAPACITY 34....

AMC-SCHOU K-2000

AMC-SCHOU MODEL K-2000 CRANKSHAFT GRINDER, S/N 1059, 23 5/8 INCH X 84 INCH CAPACITY, 32 INCH X 7/8 I...

SUNNEN CH-100K

SUNNEN MODEL CH-100K HORIZONTAL LINE HONE, S/N 2D1-2089, WITH SUNNEN MODEL CH-168 HONE DRIVER...

SUNNEN CK-10

SUNNEN CYLINDER KING MODEL CK-10 AUTOMATIC CYLINDER HONE, S/N 1085...

2018 ARBO CKH-20

2018 ARBO CKH-20 DYNAMIC BALANCING MACHINE, S/N W-2072, SOFTWARE UPGRADED TO TURNER TECHONOLOGY SOFT...

AMPRO PB-230-4

AMPRO MODEL PB-230-4 DUAL WHEEL SHOT BLAST CLEANING SYSTEM, S/N 383, WITH RECLAIMER AND MOUNTING HAR...

DEPAC

DEPAC ENGINE DYNO SYSTEM, WITH STUSKA DYNAMOMETER, DOCK AND CART SYSTEM, WATER PUMP SYSTEM, EXHAUST ...

VAN NORMAN 438 "RAP-O-MATIC"

19XX VAN NORMAN MODEL 438 "RAP-O-MATIC" 18" X 46" CRANKSHAFT GRINDER, S/N: 438-5164-162, 24" X 7/8" ...

SUNNEN 15RY-3500H

SUNNEN MODEL 15RY-3500H LINE HONE MANDREL, 3.500" - 4.00"...

KWIK-WAY MASTER HEAD SHOP

KWIK-WAY MASTER HEAD SHOP VALVE GUIDE AND SEAT MACHINE, POWER COLUMN, 16 INCH COLUMN TRAVEL, 31 INCH...

SUNNEN 10RY-2700G

SUNNEN MODEL 10RY-2700G LINE HONE MANDREL, 2.700 TO 3.000 INCH...

KANSAS INSTRUMENTS BK-17

KANSAS INSTRUMENTS MODEL BK-17 BAKE-KLEAN OVEN, GAS FIRED, 31" W X 40" DEEP X 19" H WORKING AREA, 75...

VAN NORMAN 777S

19XX VAN NORMAN MODEL 777S "PER-FECT-O" BORING BAR, WITH TABLES AND FIXTURES, 110/1/60 S/N: SH-8395...

SUNNEN 10RY-3000H

SUNNEN MODEL 10RY-3000H LINE HONE MANDRELL, 3.00 TO 3.500 INCH...

KWIK-WAY SVS-D

KWIK-WAY MODEL SVS-D VALVE REFACER, 110/1/60, WITH CABINET S/N: 12094...

SUNNEN 10RY-2400G

SUNNEN MODEL 10RY-2400G LINE HONE MANDREL, 2.400 TO 2.700 INCH...

SUNNEN 10RY-2100F

SUNNEN MODEL 10RY-2100F LINE HONE MANDREL, 2.100 TO 2.400 INCH...

KWIK-WAY 213

2000 KWIK-WAY MODEL 213 JET SPRAY ELECTRIC HEATED PARTS WASHER, 230/3/60, 26 INCH DIAMETER TURNTABLE...

SUPER FLOW SF-300

SUPER FLOW MODEL SF-300 FLOW BENCH, FLOW RANGE 25-400 CFM, 220/1/60...

KWIK-WAY 860T

KWIK-WAY MODEL 860T SURFACER, S/N 1189, UPGRADED TO CBN CUTTER HEAD, WHEELHEAD RAILS REGROUND IN 201...

TOBIN-ARP TA14

TOBIN-ARP MODEL TA14 LINE BORING MACHINE, S/N 341205...

SOUTH BEND 16" X 48"

16" X 48" ENGINE LATHE, 8" 3-JAW CHUCK, 4-WAY TOOLPOST, 5C LEVER COLLET CHUCK AND 5C COLLETS, (2) ST...

KANSAS INSTRUMENTS ALOV-89

KANSAS INSTRUMENTS MODEL ALOV-89 ELECTRIC HEAT TREAT CONVECTION BATCH OVEN, S/N 25744, INSIDE DIMENS...

SIOUX 1650

SIOUX MODEL 1650 CYLINDER HEAD WORK CENTER, WITH TOOLS...

TRICK FLOW 255 LS3

(1) PAIR OF REBUILT TRICK FLOW 255, LS3 ALUMINUM CNC HEADS WITH TRICK FLOW ROCKER STANDS, BOLTS AND ...

BHJ PRODUCTS ORG-3

BHJ PRODUCTS MODEL ORG-3 O-RING GROOVE CUTTER SET, WITH BHJ #ORP-CMN-B AND ORP-FO-6.0-PS O-RING REGI...

BRIDGEPORT STEP PULLEY VERTICAL MILL

BRIDGEPORT 1 HP, STEP PULLEY VERTICAL MILL, S/N 12BR59128, 9 X 42 INCH TABLE, R-8 TOOLING, MILL CLAM...

DELTA 6000

DELTA 6000 UNIVERSAL PRESSURE TESTER, WITH ACCESSORIES...

SUNNEN MA

SUNNEN MODEL MA PRECISION HONE, S/N 8251, WITH SUNNEN MODEL AG-300 PRECISION CLEARANCE GAGE...

SUNNEN CRG-750K

SUNNEN MODEL CRG-750K HEAVY DUTY CAP AND ROD GRINDER, 110/1/60, WITH CART S/N: 16092...

DART IRON EAGLE

(1) PAIR OF DART IRON EAGLE HEAD ASSEMBLIES, BBC RECTANGULAR PART, ROLLER SPRINGS INSTALLED AT 1.900...

BHJ PRODUCTS CBT-1

BHJ PRODUCTS CBT-1 CAM BEARING INSTALLATION TOOL KIT...

CUSTOM BUILT POLISHING LATHE, WITH HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60

RACK WITH HONE MANDRELS

SUNNEN P-300

SUNNEN P-300 VALVE GUIDE GAGE SET...

BHJ PRODUCTS PV-1B

BHJ PRODUCTS PV-1B COMPOUND ANGLE PISTON VISE...

ACCU-TURN 8922

ACCU-TURN MODEL 8922 COMBINATION BRAKE LATHE, 110/1/60...

SUNNEN GR-2245

2"-6" RANGE SUNNEN GR-2245 RETRACTABLE DIAL BORE GAGE...

HAND HELD CRANKSHAFT/CAMSHAFT POLISHER, 110/1/60

STORM VULCAN MARK II JET CLEAN

GAS FIRED HEATED PARTS WASHER, WORK SPACE 27" W X 36" H X 27" DEEP, 27" DIAMETER TURNTABLE, MACHINE ...

SUNNEN CF-1000

SUNNEN CF-1000 GAGE SETTING FIXTURE...

HONE MANDRELS

SUNNEN HONALL

SUNNEN HONALL KIT, WITH 3/8", 11/32", 5/16", 7 MM, AND 6 MM MANDRELS...

ECON-O-LINE RA-48-2

ECON-O-LINE MODEL RA-48-2 DRY BLAST CABINET, S/N E-80-728, WITH RECLAIMER...

ENERPAC PER-3032

HYDRAULIC H-FRAME PIN PRESS WITH ENERPAC MODEL PER-3032 HYDRAULIC POWER UNIT, 110/1/60, WITH SUNNEN ...

MILLER SYNCHROWAVE 300

MILLER SYNCHROWAVE 300 TIG WELDER, S/N JE800258, WITH COOLMATE 12 CHILLER, FOOT PEDAL CONTROL, TIG W...

DODGE V10

REBUILT DODGE V10 SHORT BLOCK INCLUDING ENGINE PARTS ON THE SHELVES...

GAS ROD HEATER, PROPANE, WITH TANK AND CART

VAN NORMAN 777

VAN NORMAN MODEL 777 "PER-FECT-O" BORING BAR, PARTS MACHINE...

(7) SHELVES, INCLUDING MAIN BEARINGS, CAM BEARINGS, AND ROD BEARINGS

1 2 3 4 5 ... 7 Next >>

Recent Searches

Login

Reset Password

Gardner Competition Engines LLC

Save to Project Folder

Print Options

Unlock Unlimited Printing