Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2015 | SUPERIOR BOILER WORKS | 7-X-750-S150-M |
2015 SUPERIOR BOILER WORKS 7-X-750-S150-M MOHICAN 4-PASS WETBACK FIRETUBE BOILER, 150 HP, 150 PSI STEAM DESIGN PRESSURE, 5021 MBH GROSS OUTPUT, 5175 LBS/HR STEAM (FROM & AT 212 DEGREES F. 134046 BTU/CU.FT. HEAT RELEASE. 6277 MBH RATED INPUT, 762 SQ.FT. HEATING SURFACE (ASME), 1542 GAL AT 12,824 LBS FULL WATER CAPACITY. OPENINGS: 4-1/2", 17-1/2", 12-1/2" SIDE OPENING. NO BURNER WITH THE BOILER. S/N: 17895
|
🔒 Subscribe |
|
|
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-JACKETED TROUGH APPROXIMATELY 144" L X 60" W X 66" DEEP. OPEN TOP, NO COVER. APPROXIMATE 10" DIAMETER SHAFT, 1/2" THICK X 3" WIDE OUTER RIBBON, WELDED TO 3-1/2" DIAMETER POSTS, 7/16" THICK X 3" WIDE INNER RIBBON WELDED TO 3-1/2" DIAMETER POSTS. DRIVEN BY A 75HP 3/60/230/460 VOLT, 1770RPM MOTOR, THROUGH REDUCER. 20" LONG X 12" WIDE CENTER BOTTOM DISCHARGE. MOUNTED ON (4) STAINLESS STEEL LEGS. 40" DISCHARGE HEIGHT.
|
🔒 Subscribe | |||
|
|
ALFA LAVAL | DSNX-4850 |
ALFA LAVAL DSNX-4850 SOLID BOWL DECANTER CENTRIFUGE. 2205 STAINLESS STEEL ON PRODUCT CONTACT AREAS. MAXIMUM BOWL SPEED 3650 RPM. 2 PHASE SEPARATION (SOLIDS/LIQUIDS), SINGLE LEAD CONVEYOR WITH WELDED HARD FACING, 360 DEGREE CAKE SOLIDS DISCHARGE PORTS WITH REPLACEABLE SINTERED WEAR INSERTS, BASE AND CASING, MISSING FEED PIPE, 10 KNM GEARBOX WITH 380:1 RATIO, 55KW (73HP), 380/3/50 MAIN DRIVE MOTOR, BACK DRIVE.
|
🔒 Subscribe | |
|
|
316 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-JACKETED TROUGH APPROXIMATELY 144" L X 60" W X 66" DEEP. OPEN TOP, NO COVER. APPROXIMATE 10" DIAMETER SHAFT, 1/2" THICK X 3" WIDE OUTER RIBBON, WELDED TO 3-1/2" DIAMETER POSTS, 7/16" THICK X 3" WIDE INNER RIBBON WELDED TO 3-1/2" DIAMETER POSTS. DRIVEN BY A 75HP, 3/60/230/460 VOLT, 1770RPM MOTOR, THROUGH REDUCER. 20" LONG X 12" WIDE CENTER BOTTOM DISCHARGE. MOUNTED ON (4) STAINLESS STEEL LEGS. 40" DISCHARGE HEIGHT. MISSING CHAIN, GUARDING.
|
🔒 Subscribe | |||
|
|
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-JACKETED TROUGH APPROXIMATELY 144" L X 60" W X 66" DEEP. OPEN TOP, NO COVER. APPROXIMATE 10" DIAMETER SHAFT, 1/2" THICK X 3" WIDE OUTER RIBBON, WELDED TO 3-1/2" DIAMETER POSTS, 7/16" THICK X 3" WIDE INNER RIBBON WELDED TO 3-1/2" DIAMETER POSTS. DRIVEN BY A 75HP 3/60/230/460 VOLT, 1770 RPM MOTOR, THROUGH REDUCER. 20" LONG X 12" WIDE CENTER BOTTOM DISCHARGE. MOUNTED ON (4) STAINLESS STEEL LEGS. 40" DISCHARGE HEIGHT.
|
🔒 Subscribe | |||
|
|
2015 | YONG TENG | SHJ-75B |
2015 YONG TENG SHJ-75B 72.5MM CO-ROTATING BLOCKING PARALLEL TWIN SCREW EXTRUDER S/N: 201411146. WITH PANEL.
|
🔒 Subscribe |
|
|
2014 | XINTIAN MACHINERY | SJP75 |
2014 XINTIAN MACHINERY SJP75 PARALLEL TWIN SCREW EXTRUDER WITH PANEL
|
🔒 Subscribe |
|
|
14,000 LB. S/S RIBBON BLENDER, INTERNAL BLENDING COMPARTMENT DIMS.: APROX. 144" L X 60" W X 66" DEEP, WITH BOTTOM DISCHARGE, OVERALL DIMS. OF BLENDER: APROX. 186" L X 67" W X 107" H, MOUNTED ON S/S LEGS (NOTE: MISSING MOTOR--SEE PHOTOGRAPHS)
|
🔒 Subscribe | |||
|
|
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-JACKETED TROUGH APPROXIMATELY 144" L X 60" W X 66" DEEP. OPEN TOP, NO COVER. APPROXIMATE 10" DIAMETER SHAFT, 1/2" THICK X 3" WIDE OUTER RIBBON, WELDED TO 3-1/2" DIAMETER POSTS, 7/16" THICK X 3" WIDE INNER RIBBON WELDED TO 3-1/2" DIAMETER POSTS. REQUIRES APPROXIMATE 75HP MOTOR. 20" LONG X 12" WIDE CENTER BOTTOM DISCHARGE. MOUNTED ON (4) STAINLESS STEEL LEGS. 40" DISCHARGE HEIGHT. MISSING CHAIN AND MOTOR.
|
🔒 Subscribe | |||
|
|
ALFA LAVAL / SHARPLES | PM-40000 (SAME AS A P-4600) |
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600) SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS), MAXIMUM BOWL SPEED 3350 RPM. 5.5" SINGLE LEAD CONVEYOR WITH SINTERED TUNGSTEN CARBIDE WEAR PROTECTION TILES, HOGGED-OUT CAKE DISCHARGE PORTS WITH REPLACEABLE WEAR LINERS, BASE, CASING, FEED PIPE, P90 GEARBOX 98:1 RATIO, MAIN DRIVE SUB-BASE, 60HP DRIVE MOTOR, 575/3/60, EDDY CURRENT BACK DRIVE, LUBE SYSTEM, VIBRATION ISOLATORS, SAFETY GUARDS, INCLUDES CONTROL PANEL WITH DANFOOS ELECTRONIC DRIVE.
|
🔒 Subscribe | |
|
|
FLOTTWEG | Z53/4-454 OSE |
FLOTTWEG Z53/4-454 OSE SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS). MAXIMUM BOWL SPEED 3100 RPM, BASE, SINGLE LEAD CONVEYOR WITH CAKE FLINGERS, LINED CAKE DISCHARGE PORTS, ADJUSTABLE LIQUID PANS, CASING, GEARBOX, 37 KW 400/3/50 DRIVE MOTOR, ROTO-DIFF HYDRAULIC 4 KW BACK DRIVE WITH PUMP AND RESERVOIR, LUBRICATION SYSTEM, FEED PIPE, SAFETY GUARDS, VIBRATION ISOLATORS.
|
🔒 Subscribe | |
|
|
ALFA LAVAL / SHARPLES | DS-406 SUPER-D-CANTER CENTRIFUGE |
ALFA LAVAL / SHARPLES DS-406 SUPER-D-CANTER CENTRIFUGE. 317 STAINLESS STEEL CONSTRUCTION, MAXIMUM BOWL 3650 SPEED (4000 X G FORCE), 8" SINGLE LEAD CONVEYOR WITH SINTERED TUNGSTEN CARBIDE WEAR PROTECTION TILES, 360 DEGREE SOLIDS DISCHARGE PORTS WITH CARBIDE WEAR INSERTS, RING PALTE DAM, SILICONE RINGS, BASE, CASING, STANDARD FEED PIPE, LUBE SYSTEM, MAIN DRIVE SUB-BASE, 150HP, 460/3/60 MAIN DRIVE MOTOR, (45KW) 460/3/60 BACKDRIVE, GEAERBOX RATIO. SAFETY GUARDS.
|
🔒 Subscribe | |
|
|
US FILTERMAXX | PTDC50 |
US FILTERMAXX PTDC50 50 KG PERFORATED BOWL BAG CENTRIFUGE, 30 TO 35 LBS DRY HEMP CAPACITY, 600MM BASKET DIAMETER, 40L VOLUME. 5 HP PERFORATED BOWL CENTRIFUGE, BAG SIZE FROM 5 TO 100 MICRON THAT ARE USED INSIDE THE BOWL TO COLLECT HEMP SOLIDS. GREAT FOR REMOVING SMALL HEMP PARTICLES FROM SUSPENSION. EXPLOSION PROOF MOTOR; VARIABLE SPEED DRIVE; LARGE CAPACITY BOWL; STAINLESS STEEL CONSTRUCTION; POWERFUL 5 HP NEMA FRAME MOTOR. (NEMA FRAMES ARE THE US STANDARD); 3 PHASE 230 VOLTS 8 AMPS NO LOAD 15.2 AMPS FULL LOAD; SPINDLE BRAKE STOPS BOWL QUICKLY (LONG HANDLE WITH RED KNOB); 1 1/4 INCH DIAMETER INPUT, 2 INCH OUTPUT; FLOOR SPACE 4 FEET WIDE, 5 FEET DEEP, 40 INCHES TO THE TOP OF THE INPUT HOSE BARB; BELT DRIVE.
|
🔒 Subscribe | |
|
|
316 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-JACKETED TROUGH APPROXIMATELY 144" L X 60" W X 66" DEEP. OPEN TOP, NO COVER. APPROXIMATE 10" DIAMETER SHAFT, 1/2" THICK X 3" WIDE OUTER RIBBON, WELDED TO 3-1/2" DIAMETER POSTS, 7/16" THICK X 3" WIDE INNER RIBBON WELDED TO 3-1/2" DIAMETER POSTS. DRIVEN BY A 75HP 3/60/230/460 VOLT, 1770RPM MOTOR. APPROXIMATE 20" LONG X 12" WIDE CENTER BOTTOM DISCHARGE. MOUNTED ON (4) STAINLESS STEEL LEGS. 40" DISCHARGE HEIGHT. MISSING DISCHARGE COVER, PNEUMATICS, CHAIN, GEARBOX, GUARDING.
|
🔒 Subscribe | |||
|
|
BAKER PERKINS | 15 |
BAKER PERKINS 15 DOUBLE ARM SIGMA BLADE MIXER, 100 GALLON CAPACITY. CARBON STEEL JACKETED BOWL 33" LEFT-RIGHT X 38" FRONT-BACK X 30" DEEP. DRIVEN BY A 30 HP, 3/60/230/460 VOLT, 1770 RPM MOTOR WITH SPEED REDUCER. HYDRAULIC TILT, POWER PACK DRIVEN BY A 7.5 HP MOTOR. MOUNTED ON A PAINTED CARBON STEEL BASE. S/N: 41090
|
🔒 Subscribe | |
|
|
JONES | CMV-5 |
JONES CMV-5 SEMI AUTOMATIC CONTINUOUS MOTION VERTICAL CARTONER, CAPABLE OF SPEEDS UP TO 120 CONTAINERS PER MINUTE. INCLUDES NORDSON PROBLUE 4 HOT MELT GLUE UNIT. HAS 5" CENTERS FOR A CARTON SIZE RANGE OF: LENGTH: 3/4" TO 4-1/4"; WIDTH: 1" TO 3". DEPTH/HEIGHT 2-1/2" TO 8". LEXAN SAFETY GUARDING AND STAINLESS STEEL PRODUCT GUARDING. HAS 5' LONG MANUAL LOAD AREA. BOTTOM FLAP EMBOSSE DATE CODER, REQUIRES PRINT HEAD. MOUNTED ON CASTERS. 3/60/240V.
|
🔒 Subscribe | |
|
|
WESTFALIA | OTA30-00-066 |
WESTFALIA OTA30-00-066 SOLID BOWL DISC CENTRIFUGE. BOWL SPEED 6590 RPM. DRIVEN BY A 10HP, 3/60/208-230/460 VOLT, 1760 RPM XP MOTOR. ALUMINUM CASE WITH COVER, NICKEL BOWL. S/N: 1676985
|
🔒 Subscribe | |
|
|
ALFA LAVAL / SHARPLES | PM-40000 (SAME AS A P-4600) |
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600) SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS), MAXIMUM BOWL SPEED 3350 RPM. 5.5" SINGLE LEAD CONVEYOR WITH SINTERED TUNGSTEN CARBIDE WEAR PROTECTION TILES, HOGGED-OUT CAKE DISCHARGE PORTS WITH REPLACEABLE WEAR LINERS, BASE, CASING, FEED PIPE, P90 GEARBOX 98:1 RATIO, MAIN DRIVE SUB-BASE, 60 HP DRIVE MOTOR, 575/3/60, EDDY CURRENT BACKDRIVE, LUBE SYSTEM, VIBRATION ISOLATORS, SAFETY GUARDS, INCLUDES CONTROL PANEL WITH DANFOOS ELECTRONIC DRIVE.
|
🔒 Subscribe | |
|
|
BOSCH | CUT120 |
BOSCH CUT120 AUTOMATIC INTERMITTENT MOTION HORIZONTAL TUCK CARTONER CAPABLE OF SPEEDS UP TO 60 CARTONS PER MINUTE. HAS ADJUSTABLE BUCKET INFEED ON 5" CENTERS FOR A CARTON SIZE RANGE: LENGTH 20 TO 113 MM, WIDTH 15 TO 113 MM, DEPTH 50 TO 200 MM. HAS A MULTIFEEDER TECHNOLOGY HIGH CAPACITY 16 POCKET ROTARY LEAFLET FEEDER, MODEL HCRM125, MULTIFEEDER SERIES MFT250IP FRICTION FEEDER, AND AN APL1250 AUTOMATIC PRODUCT LOADER. CASCADING POUCH TRANSFER SYSTEM. HAS 6' LONG EXTENDED CARTON MAGAZINE, EMBOSSE DATE CODER, BAR CODE SCANNER AND VERIFICATION SYSTEM. THE BOSCH CUT120 ALSO HAS ALL STAINLESS STEEL CONTACT POINTS WITH AN ALUMINUM FRAME. HAS AUTOMATIC POUCH TRANSFER AND VERIFICATION SYSTEM. HAS ALLEN-BRADLEY KINET 1X6000 CONTROLS AND A VERSAVIEW 1200P PANEL. REQUIRES 80 MIN PSI. 3/60/480V.
|
🔒 Subscribe | |
|
|
ALFA LAVAL | ALDEC-404 |
ALFA LAVAL ALDEC-404 SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS). MAXIMUM BOWL SPEED 4000 RPM, SINGLE ROW OF LINED CAKE DISCHARGE PORTS, 110MM SINGLE LEAD CONVEYOR WITH WELDED HARDFACING, MOON LIQUID PLATE DAMS, BASE, CASING, 2.5 KNM GEARBOX WITH 159:1 RATIO, FEED PIPE, 22 KW 380/3/50 DRIVE MOTOR, DC BACKDRIVE MOTOR.
|
🔒 Subscribe | |
|
|
THERMO SCIENTIFIC | REL5004A23 |
THERMO SCIENTIFIC REL5004A23 LABORATORY UPRIGHT REFRIGERATOR. 20OZ CHARGE OF R-134A REFRIGERANT. APPROXIMATELY 51.1 CU FT CAPACITY, -58 TO -123 DEGREES F TEMPERATURE RANGE. APPROXIMATELY 52-1/2" WIDE X 57-1/2" TALL X 26" DEEP CHAMBER, WITH (4) 25-1/2" DEEP X 23" WIDE WIRE SHELVES. 115V 60HZ POWER REQUIREMENTS. ON CASTERS. S/N: 0116102301110712
|
🔒 Subscribe | |
|
|
2013 | FABSCO | FIN AIR FIN FAN |
2013 FABSCO FIN AIR FIN FAN HEAT EXCHANGER, APPROXIMATE 660 SQUARE FEET, GALVANIZED HOUSING. (158) 1" DIAMETER X 192" LONG CARBON STEEL TUBES RATED 450 PSI AT -20 TO 450 DEGREES F. (2) APPROXIMATE 7' DIAMETER FANS, EACH DRIVEN BY A 15HP MOTOR. (2) 4" INLETS, (2) 3" OUTLETS. S/N: A13-10798-1. NATIONAL BOARD # 7818.
|
🔒 Subscribe |
|
|
LAUDENBERG | PMP20 |
LAUDENBERG PMP20 DUPLEX PRE-MADE POUCH PACKAGER. CAPABLE OF SPEEDS UP TO 80 POUCHES PER MINUTE. CURRENTLY SET UP FOR 4.5" WIDE X 7" TALL PRE-MADE POUCHES WITH ZIPPER AND STAND-UP CONSTRUCTION. HAS A POUCH SIZE RANGE: 80MM - 130MM OR 3.15" - 5.12" WIDE X 120MM - 350MM OR 4.72" - 13.87" HEIGHT. SERVO DRIVEN TURRET, HAS ALLEN BRADLEY PLC 5/60 CONTROLS AND ALLEN BRADLEY PANELVIEW 1000 HMI CONTROL PANEL (NEW PLC/HMI UPGRADES AVAILABLE UPON REQUEST). HAS DUPLEX POWERED POUCH MAGAZINE FEED, MECHANICAL/PNEUMATIC POUCH AND ZIPPER OPENING STATION, FILL STATION WITH FUNNELS ON 7" CENTERS, HOLE PUNCH, SEAL STATION AND DISCHARGE CONVEYOR. LAST RUNNING TANDEM ZIPPER STAND UP POUCHES OF CAT PET FOOD TREATS. DOES NOT INCLUDE FILLER. 3/60/480V.
|
🔒 Subscribe | |
|
|
2006 | ALFA LAVAL | MX25-BFG |
2006 ALFA LAVAL MX25-BFG PLATE TYPE HEAT EXCHANGER. 2906 SQUARE FEET, VERTICAL. (182) APPROXIMATE 24" WIDE X 85" TALL X 0.40MM 304 STAINLESS STEEL PLATES RATED 150 PSI AT -20 TO 150 DEGREES F. (2) 8" INLETS, (2) 8" OUTLETS. MOUNTED ON EXPANDABLE FRAME WITH CARBON STEEL END PLATES. S/N: 30110-65664. NATIONAL BOARD # 24801.
|
🔒 Subscribe |
|
|
PACE PACKAGING | M-600HK SSD |
PACE PACKAGING M-600HK SSD AUTOMATIC HIGH SPEED BULK BOTTLE UNSCRAMBLER. CAPABLE OF SPEEDS UP TO 500 BPM. BOTTLE SIZE RANGE: 1.7 OZ - 2.5 GALLON OR 50ML - 9.5L (WITH CHANGE PARTS). LAST RUNNING 11OZ OVAL CONDIMENT BOTTLES IN HOT FILL OPERATION. HAS ALLEN BRADLEY PLC CONTROLS. INCLUDES CLEATED BELT BULK BOTTLE ELEVATOR/FEEDER. BOTTLE MATERIALS: PET, HDPE, PP, PS, PVC & SPIRAL WOUND FIBER. BOTTLE SHAPES: ROUNDS, RECTANGLES, SQUARES, OVALS WITH AND WITHOUT HANDLES.
|
🔒 Subscribe | |
|
|
BOSCH (SYNTEGON) | ELEMATIC 3000 |
BOSCH (SYNTEGON) ELEMATIC 3000 AUTOMATIC WRAPAROUND CASE PACKER. TYPE ELE 3000. HAS NORDSON PROBLUE HOTMELT GLUE SYSTEM, ALLEN BRADLEY CONTROLOGIX 5561 PLC, ALLEN BRADLEY PANELVIEW 1000 HMI AND KINETICS SERVO DRIVES. LAST RUNNING CARTONS OF 1LB AND 2LB VELVEETA CHEESE BRICK CARTONS IN A 3 X 4 12 COUNT CASE. HAS RIGHT ANGLE INFEED WITH CARTON UP STACKER.
|
🔒 Subscribe | |
|
|
BARTELT (KLOCKNER) | IM7-14 |
BARTELT (KLOCKNER) IM7-14 HORIZONTAL FORM FILL AND SEAL MACHINE. MACHINE IS CAPABLE OF SPEEDS UP TO 100 CPM. HAS POUCH SIZE RANGE: 2" - 5-3/4" (WIDTH) X 2"- 9" (HEIGHT), CHANGE PARTS MAY BE REQUIRED FOR FULL SIZE RANGE. HAS SINGLE AUGER FILLER WITH FUNNEL POCKET TRANSFER. ALLEN BRADLEY PLC CONTROLS.
|
🔒 Subscribe | |
|
|
JONES | LEGACY HORIZONTAL AUTOMATIC LOAD CARTONER |
JONES LEGACY HORIZONTAL AUTOMATIC LOAD CARTONER CAPABLE OF A MAXIMUM SPEED OF APPROXIMATELY 400 CARTONS PER MINUTE. CARTON SIZE RANGE OF 0.75" - 5" LENGTH; 0.75" - 3" WIDTH (NOW EQUIPPED WITH 3/4" LUGS, 3" LUGS ARE A CHANGE PART AVAILABLE FROM OEM). 2.5" - 7.25" HEIGHT. 6" CENTERS. NORDSON 3500 SERIES GLUE UNIT. MOUNTED ON CASTERS. 137" LONG INFEED, 6" WIDE. 43" LONG CARTON MAGAZINE. USES ALLEN BRADLEY SLC 5/04 PLC CONTROLS, PLS 5000 SERIES INTERFACE. EMBOSS DATE CODER. ADJUSTABLE BUCKET INFEED. INDRAMAT SERVOS. 21.2 AMPS. 3/60/460V.
|
🔒 Subscribe | |
|
|
IWKA | SI 6 |
IWKA SI 6 HORIZONTAL GLUE CARTONER. CAPABLE OF SPEEDS OF UP TO 60 CARTONS A MINUTE. MACHINE IS CAPABLE OF A CARTON SIZE RANGE OF 20-125MM (0.787"-4.92") LENGTH; 15-100MM (0.59"-3.93") WIDTH; 65-180MM (2.55"-7.086") HEIGHT. SET UP ON 6 INCH CENTERS. IS EQUIPPED WITH A RON TECH MODEL FEEDER, GUK PAGE FOLDER/INSERTER, NORDSON PROBLUE 4 HOT MELT GLUE SYSTEM, LAETUS CAMERA REJECT SYSTEM. 3/60/480 VOLT. S/N: 32. LAST USED IN PHARMACEUTICAL NEBULIZER REFILL CARTONING OPERATION FROM BLOW FILL SEAL MACHINE.
|
🔒 Subscribe | |
|
|
2006 | ALFA LAVAL | MX25-BFG |
2006 ALFA LAVAL MX25-BFG PLATE TYPE HEAT EXCHANGER, 2906 SQUARE FEET, VERTICAL. APPROXIMATE 24" WIDE X 85" TALL X 0.40MM 304 STAINLESS STEEL PLATES RATED 150 PSI AT 150 DEGREES F. (2) 8" INLETS, (2) 8" OUTLETS. MOUNTED ON EXPANDABLE FRAME WITH CARBON STEEL END PLATES. S/N: 30110-65665, NATIONAL BOARD# 24802.
|
🔒 Subscribe |
|
|
2008 | WCR INCORPORATED | WCR-A891M |
2008 WCR INCORPORATED WCR-A891M PLATE HEAT EXCHANGER, 741.1 SQUARE FEET, 316 STAINLESS STEEL, VERTICAL. (83) APPROXIMATE 15" WIDE X 67" LONG PLATES RATED HOT/COLD SIDES 150 PSI AT -50 TO 266 DEGREES F. (2) 8" DIAMETER INLET, (2) 8" DIAMETER OUTLET. MOUNTED ON A EXPANDABLE FRAME WITH CARBON STEEL END PLATES. RATED 200 - 4000 GPM DEPENDING ON TEMPERATURE. NATIONAL BOARD # 187. S/N: 1589.15
|
🔒 Subscribe |
|
|
HAYSSEN | ULTIMAX CM-15 HPR |
HAYSSEN ULTIMAX CM-15 HPR CONTINUOUS MOTION WASHDOWN VERTICAL FORM FILL SEAL BAGGER. CAPABLE OF SPEEDS UP TO 130 BAGS PER MINUTE (DEPENDING ON SIZE AND APPLICATION). SUITABLE FOR STRUCTURED, BARRIER TYPE RESISTANCE SEALED FILM, WITH BAGSIZE RANGE APPROXIMATELY 2" - 15" (WIDTH) 2" - 30" (LENGTH). HAS TOP AND BOTTOM GUSSETING. USES ALLEN BRADLEY LOGIX 5561 PLC CONTROLS, ALLEN BRADLEY VERSA VIEW 1200 HMI, REXROTH SERVO DRIVES AND PRINT REGISTRATION. LAST USED IN WASHDOWN FACILITY AND WAS RUNNING FROZEN SAUSAGE AND MEAT PRODUCTS. AEK CAN MOUNT AND INTEGRATE FILLERS PER APPLICATION AT AN ADDITIONAL COST (COMBINATION SCALES, AUGER FILLERS, VOLUMETRIC CUP FILLERS, LIQUID/PISTON FILLERS ETC). 30 AMPS. 1/60/460V. CURRENTLY EQUIPPED WITH A 15" FORMER, INQUIRE WITH SALES REPRESENTATIVE ABOUT OTHER AVAILABLE FORMERS.
|
🔒 Subscribe | |
|
|
KLOCKNER IMC/S | AUTOMATIC HORIZONTAL CARTONER |
KLOCKNER IMC/S AUTOMATIC HORIZONTAL CARTONER WITH POUCH TRANSFER. SET UP FOR HOT MELT GLUE CARTONS. HAS ALLEN BRADLEY CONTROLOGIX PLC, AB PANELVIEW HMI, AB KINETICS SERVO DRIVE. AND WAS LAST RUNNING WITH BARTELT IM7-14 FORM FILL SEAL MACHINE.
|
🔒 Subscribe | |
|
|
ALFA LAVAL | AVNX-426B-31G |
ALFA LAVAL AVNX-426B-31G (SAME AS A PM-36000) SOLID BOWL DECANTER CENTRIFUGE, 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS). 5.5" SINGLE LEAD CONVEYOR WITH SINTERED TUNGSTEN CARBIDE WEAR INSERTS, MAXIMUM BOWL SPEED 3250 RPM, 360 DEGREE SOLIDS DISCHARGE PORTS, MOON LIQUID PLATE DAMS, BOWL, P125 GEARBOX (125:1 RATIO), BASE, CASING, LUBRICATION SYSTEM, 37 KW,(49.6HP) 690/3/50 MAIN DRIVE, BACK DRIVE, FEED PIPE WITH POLY ADDITION PORT, VIBRATION ISOLATORS, VIBRATION SWITCH, SAFETY GUARDS, CONTROL PANEL.
|
🔒 Subscribe | |
|
|
ALFA LAVAL | AVNX-616B-31G |
ALFA LAVAL AVNX-616B-31G SOLID BOWL DECANTER CENTRIFUGE, 316 STAINLESS STEEL (PRODUCT CONTACT AREAS). MAXIMUM BOWL SPEED 3250 RPM, SINGLE LEAD CONVEYOR WITH WELDED HARDFACING, MOON LIQUID PLATE DAMS, BASE, CASING WITH CAKE VIBRATOR, FEED PIPE, 2.5 KNM GEARBOX, 11KW 380/3/50 MAIN MOTOR.
|
🔒 Subscribe | |
|
|
FLOTTWEG | Z4D/4-454 |
FLOTTWEG Z4D/4-454 SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS), MAXIMUM BOWL SPEED 3500 RPM, APPROXIMATE 5" SINGLE LEAD CONVEYOR WITH WELDED HARDFACING. ROTODIFF BACKDRIVE WITH POWERPACK, FEED PIPE, LUBRICATION SYSTEM, ADJUSTABLE LIQUID PLATE DAMS, 30 KW, 400/3/50/2956 RPM ABB MAIN DRIVE MOTOR WITH FLUID COUPLING, FRAME/CASING, VIBRATION ISOLATORS, SAFETY GUARDS.
|
🔒 Subscribe | |
|
|
LEISTRITZ | MIC 27-GL-32D |
LEISTRITZ MIC 27-GL-32D CO-ROTATING TWIN SCREW EXTRUDER. (2) 1.05" (27 MM) DIAMETER SCREWS, 32:1 L/D RATIO. DRIVEN BY A 12KW(16HP) 346-460/200-265V 3250/MIN MOTOR THROUGH REDUCER. (8) ZONES, ELECTRICALLY HEATED, WATER COOLED. WITH SQUIRE-COGSWELL VACUUM PUMP DRIVEN BY A 1.7HP 3.60/220/380V MOTOR. (1) DEGASSING PORT. MAXIMUM SCREW SPEED 500 RPM. 3 PH 460V, 2950 RPM MOTOR. TEMPERATURE CONTROL AND MAIN CONTROL CABINET. 8239 HOURS. S/N: 2363
|
🔒 Subscribe | |
|
|
GEA WESTFALIA | CTC-1-06-107 |
GEA WESTFALIA CTC-1-06-107 SOLID BOWL DISC CENTRIFUGE. 316 STAINLESS STEEL (PRODUCT CONTACT AREAS). MAXIMUM BOWL SPEED 12000 RPM, CLARIFIER DESIGN (LIQUID/SOLIDS SEPARATION), RATED 1.0 KG/CU DM HEAVY PHASE, 1.4 KG/CU DM SOLIDS, 1 KW MOTOR, CENTRIPETAL PUMP LIQUID DISCHARGE, BELT DRIVE CONFIGURATION, BENCH TOP DESIGN WITH CONTROL PANEL WITH VFD MOTOR CONTROLLER, 120 VOLT.
|
🔒 Subscribe | |
|
|
1995 | ZALKIN | CA3 |
1995 ZALKIN CA3 3 HEAD ROTARY CHUCK/SNAP CAPPER. LAST RUNNING 29MM BERICAP (RICAL) #7610 CLOSURE 7610 ON 24 OZ, 32 OZ AND 48 OZ ROUND PLASTIC CONTAINERS OF EDIBLE / VEGETABLE OIL. 3/60/220 V S/N: 23195
|
🔒 Subscribe |
|
|
PAUL O. ABBE | AF350 |
PAUL O. ABBE AF350 CROSS FLOW MIXER / TWIN SHAFT FLUIDIZER. 304 STAINLESS STEEL. 12.4 CUBIC FEET WORKING CAPACITY, MAXIMUM 17 CUBIC FEET. NON-JACKETED TROUGH APPROXIMATELY 39-3/8" WIDE X 49-1/2" LONG X 35" DEEP. (2) APPROXIMATE 3" DIAMETER SHAFTS WITH (28) 8" WIDE X 7" LONG X 3/16" THICK PADDLES WELDED WITH 1-1/4" DIAMETER POSTS. BOLT ON TOP COVER WITH (2) HINGED DOORS, (2) SIDE ACCESS DOORS. (2) BOMBAY OUTLET DOOR, AIR OPERATED. DRIVEN BY A 7.5 HP, 3/60/230-460 VOLT, 1720 RPM MOTOR WITH WITH 24.40:1 GEARBOX RATIO. MOUNTED ON A PAINTED CARBON STEEL FRAME. S/N: A48097
|
🔒 Subscribe | |
|
|
FUJI FORMOST | FW3710B ALPHA III |
FUJI FORMOST FW3710B ALPHA III ACTIVETECH HORIZONTAL BOX MOTION WRAPPER. UNIT IS CAPABLE OF SPEEDS FROM 10 TO 100 PACKAGES PER MINUTE. PACKAGE SIZE RANGE: 2.25" - 17.5" LENGTH; UP TO 11" WIDTH; UP TO 5" IN HEIGHT. MAXIMUM FILM WIDTH OF 23.5", NON-REGISTERED. USES ALPHA III CONTROLS WITH LONG DWELL SEAL HEAD, ALL STAINLESS STEEL CONSTRUCTION, ADJUSTABLE FORMER AND HAS ATTACH-LESS INFEED WITH DUAL FLAT BELT NON-FLIGHTED INFEED SYSTEM FOR HANDLING FRAGILE, STICKY OR DIFFICULT TO PACKAGE PRODUCTS. S/N: 093704. 3/60/230.
|
🔒 Subscribe | |
|
|
WERNER & PFLEIDERER | UK80-AES |
WERNER & PFLEIDERER UK80-AES MIXER EXTRUDER, 316 STAINLESS STEEL ON PRODUCT CONTACT PARTS. WORKING CAPACITY 21.2 GALLON (80 LITER), TOTAL CAPACITY 31.7 GALLON (120 LITER). DOUBLE JACKETED BOWL 20-3/4" FRONT TO BACK X 20-1/4" LEFT TO RIGHT, APPROXIMATE 27" DEEP. DOMED TOP COVER WITH (2) 4" SIGHT GLASSES, (2) 2", (2) 3/4", SUITABLE FOR VACUUM. HAS A GRID LID. 316 STAINLESS STEEL SIGMA STYLE BLADES, APPROXIMATE 5-1/4" DIAMETER X 44" LONG 316 STAINLESS STEEL SCREW DISCHARGE. BLADE SPEED 10.5 TO 105 RPM AND DISCHARGE SCREW SPEED 8.5 TO 85 RPM. HYDRAULIC DRIVEN BY (3) HYDROKRAFT MODEL PVG130-E HYDRAULIC UNITS DRIVEN BY 22KW, 50 HERTZ MOTOR. INCLUDES (2) CONTROL PANELS, (1) TOP COVER WITH PRESS PISTON AND RAM, (1) EXTRA SCREW, AND MISC. PARTS. MOUNTED ON CARBON STEEL FRAME.
|
🔒 Subscribe | |
|
|
HARTNESS | 835 |
HARTNESS 835 AUTOMATIC DESCENDING DROP CASE PACKER. CAPABLE OF SPEEDS FROM 5 TO 25 CASES PER MINUTE WITH NUMBER OF PRODUCT PER CASE DEPENDING ON MATERIALS, APPLICATION AND CASE PACK PATTERN. CASE SIZE RANGE: 7" - 22-1/2" (LENGTH) X 5-1/2" - 16-1/2" (WIDTH) X 2" - 20" (HEIGHT). HAS A CONTAINER SIZE RANGE: 2OZ TO 2 GALLONS AND CAN HANDLE GLASS, AND PLASTIC ROUND CONTAINERS OF VARIOUS SIZES AND SHAPES (ALL WITH PROPER CHANGE PARTS). EQUIPPED WITH SERVO DRIVEN PRODUCT LANER IN FEED CONVEYORS, TO CONTROL PANEL HAS A/B CPU CONTROLLER AND A/B PANELVIEW TOUCH SCREEN DISPLAY WITH START, STOP, RESET, E-STOP CONTROLS AND STATIS LIGHT BAR. MOUNTED ON HEAVY DUTY BASE FRAME INTERLOCK SAFETY GUARDING AND LEVELING LEGS
|
🔒 Subscribe | |
|
|
SHARPLES | P180 SUPER-D-CANTER CENTRIFUGE |
SHARPLES P180 SUPER-D-CANTER CENTRIFUGE GEARBOX, 47:1 RATIO
|
🔒 Subscribe | |
|
|
ALFA LAVAL / SHARPLES | PM-3600 SUPER-D-CANTER |
ALFA LAVAL / SHARPLES PM-3600 SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT AREAS), MAXIMUM BOWL SPEED 3500 RPM, 4-1/2" SINGLE LEAD CONVEYOR, LIQUID PLATE DAMS, GEARBOX 125:1 RATIO, BASE, CASING, APPROXIMATE 37KW (49.6HP) MAIN DRIVE MOTOR (380/50/3), BACK DRIVE MOTO. MOUNTED ON A CARBON STEEL SUB-FRAME WITH VIBRATION ISOLATORS, SAFETY GUARDS.
|
🔒 Subscribe | |
|
|
PEARSON | CS40-G |
PEARSON CS40-G AUTOMATIC STAINLESS STEEL HOT MELT TOP CASE SEALER. CAPABLE OF SPEEDS UP TO 40 CASES PER MINUTE (DEPENDING ON APPLICATION AND CASE SIZE). HAS A CASE SIZE RANGE: 8" - 24" (LENGTH) X 5" - 16" (WIDTH) X 7" - 22-3/4" (HEIGHT/DEPTH). MAXIMUM CASE WEIGHT OF 65 POUNDS. HAS AUTOMATIC INDEXING, NORDSON PRO BLUE 10 HOT MELT GLUE SYSTEM. ALLEN BRADLEY 300 MICRO PANELVIEW, ALLEN BRADLEY COMPACTOGIX PLC WITH ALLEN BRADLEY PANELVIEW PLUS 700 HMI. 3/60/460V. HAS 12" WIDE X 120" ROLLER INFEED CONVEYOR
|
🔒 Subscribe | |
|
|
QUADRO | U20 |
QUADRO U20 COLLOID MILL. APPROXIMATE CAPACITY UP TO 4250 POUNDS AN HOUR. TOP FEED, BOTTOM DISCHARGE. MOUNTED ON STAINLESS STEEL FRAME WITH CASTERS. HAS 5HP 3/60/230/460V RELIANCE DRIVE UL RATED FOR HAZARDOUS LOCATIONS.
|
🔒 Subscribe | |
|
|
2014 | TRANTER | GXP-042-H-5-NR-145 |
2014 TRANTER GXP-042-H-5-NR-145 PLATE HEAT EXCHANGER 677.27 SQUARE FEET SURFACE AREA. RATED 150 PSI AT -20 TO 200 DEGREES F. S/N: 01SC0361, NATIONAL BOARD # 61778.
|
🔒 Subscribe |
|
|
1995 | AMERICAN PROCESS | FZM-4S |
1995 AMERICAN PROCESS FZM-4S TWIN SHAFT FLUIDIZED ZONE MIXER. 4.2 CUBIC FEET, 120 LITERS, CARBON STEEL. NON-JACKETED TROUGH APPROXIMATE 33" LONG X 29" WIDE X 24" DEEP. (2) 2" DIAMETER SHAFTS EACH WITH (14) 5-3/4" WIDE X 1/8" THICK PADDLES WELDED TO 1" POSTS. DRIVEN BY A 5 HP, 3/60/230/460 VOLT, 1680 RPM MOTOR. (2) BREAKER BARS DRIVEN BY A 1 HP, 3/60/230/460 VOLT, 1720 RPM MOTORS. (2) APPROXIMATE 26" X 6" BOTTOM OUTLETS. HAS SIDE LUGS. S/N: 4388
|
🔒 Subscribe |
|
|
ALFA LAVAL | BIODIESEL / FISH OIL DESLUDGER DISC CENTRIFUGE |
ALFA LAVAL BIODIESEL / FISH OIL DESLUDGER DISC CENTRIFUGE
|
🔒 Subscribe |
2015 SUPERIOR BOILER WORKS 7-X-750-S150-M
BOILERS
2015 SUPERIOR BOILER WORKS 7-X-750-S150-M MOHICAN 4-PASS WETBACK FIRETUBE BOILER, 150 HP, 150 PSI ST...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-J...
Hammer Price:
🔒
ALFA LAVAL DSNX-4850
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL DSNX-4850 SOLID BOWL DECANTER CENTRIFUGE. 2205 STAINLESS STEEL ON PRODUCT CONTACT AREAS. ...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
316 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-J...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-J...
Hammer Price:
🔒
2015 YONG TENG SHJ-75B
PLASTICS PROCESSING EQUIPMENT
2015 YONG TENG SHJ-75B 72.5MM CO-ROTATING BLOCKING PARALLEL TWIN SCREW EXTRUDER S/N: 201411146. WITH...
Hammer Price:
🔒
2014 XINTIAN MACHINERY SJP75
PLASTICS PROCESSING EQUIPMENT
2014 XINTIAN MACHINERY SJP75 PARALLEL TWIN SCREW EXTRUDER WITH PANEL...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
14,000 LB. S/S RIBBON BLENDER, INTERNAL BLENDING COMPARTMENT DIMS.: APROX. 144" L X 60" W X 66" DEEP...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
304 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-J...
Hammer Price:
🔒
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600)
MISC
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600) SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CO...
Hammer Price:
🔒
FLOTTWEG Z53/4-454 OSE
CHEMICAL PROCESSING EQUIPMENT
FLOTTWEG Z53/4-454 OSE SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CON...
Hammer Price:
🔒
ALFA LAVAL / SHARPLES DS-406 SUPER-D-CANTER CENTRIFUGE
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL / SHARPLES DS-406 SUPER-D-CANTER CENTRIFUGE. 317 STAINLESS STEEL CONSTRUCTION, MAXIMUM BO...
Hammer Price:
🔒
US FILTERMAXX PTDC50
CHEMICAL PROCESSING EQUIPMENT
US FILTERMAXX PTDC50 50 KG PERFORATED BOWL BAG CENTRIFUGE, 30 TO 35 LBS DRY HEMP CAPACITY, 600MM BAS...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
316 STAINLESS STEEL DOUBLE SPIRAL RIBBON BLENDER. APPROXIMATE 270 CUBIC FOOT WORKING CAPACITY. NON-J...
Hammer Price:
🔒
BAKER PERKINS 15
MISC
BAKER PERKINS 15 DOUBLE ARM SIGMA BLADE MIXER, 100 GALLON CAPACITY. CARBON STEEL JACKETED BOWL 33" L...
Hammer Price:
🔒
JONES CMV-5
PACKAGING EQUIPMENT
JONES CMV-5 SEMI AUTOMATIC CONTINUOUS MOTION VERTICAL CARTONER, CAPABLE OF SPEEDS UP TO 120 CONTAINE...
Hammer Price:
🔒
WESTFALIA OTA30-00-066
CHEMICAL PROCESSING EQUIPMENT
WESTFALIA OTA30-00-066 SOLID BOWL DISC CENTRIFUGE. BOWL SPEED 6590 RPM. DRIVEN BY A 10HP, 3/60/208-2...
Hammer Price:
🔒
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600)
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL / SHARPLES PM-40000 (SAME AS A P-4600) SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CO...
Hammer Price:
🔒
BOSCH CUT120
PACKAGING EQUIPMENT
BOSCH CUT120 AUTOMATIC INTERMITTENT MOTION HORIZONTAL TUCK CARTONER CAPABLE OF SPEEDS UP TO 60 CARTO...
Hammer Price:
🔒
ALFA LAVAL ALDEC-404
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL ALDEC-404 SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTA...
Hammer Price:
🔒
THERMO SCIENTIFIC REL5004A23
MISC
THERMO SCIENTIFIC REL5004A23 LABORATORY UPRIGHT REFRIGERATOR. 20OZ CHARGE OF R-134A REFRIGERANT. APP...
Hammer Price:
🔒
2013 FABSCO FIN AIR FIN FAN
INDUSTRIAL AND COOLING HEATING EQUIPMENT
2013 FABSCO FIN AIR FIN FAN HEAT EXCHANGER, APPROXIMATE 660 SQUARE FEET, GALVANIZED HOUSING. (158) 1...
Hammer Price:
🔒
LAUDENBERG PMP20
PACKAGING EQUIPMENT
LAUDENBERG PMP20 DUPLEX PRE-MADE POUCH PACKAGER. CAPABLE OF SPEEDS UP TO 80 POUCHES PER MINUTE. CURR...
Hammer Price:
🔒
2006 ALFA LAVAL MX25-BFG
CHEMICAL PROCESSING EQUIPMENT
2006 ALFA LAVAL MX25-BFG PLATE TYPE HEAT EXCHANGER. 2906 SQUARE FEET, VERTICAL. (182) APPROXIMATE 24...
Hammer Price:
🔒
PACE PACKAGING M-600HK SSD
PACKAGING EQUIPMENT
PACE PACKAGING M-600HK SSD AUTOMATIC HIGH SPEED BULK BOTTLE UNSCRAMBLER. CAPABLE OF SPEEDS UP TO 500...
Hammer Price:
🔒
BOSCH (SYNTEGON) ELEMATIC 3000
PACKAGING EQUIPMENT
BOSCH (SYNTEGON) ELEMATIC 3000 AUTOMATIC WRAPAROUND CASE PACKER. TYPE ELE 3000. HAS NORDSON PROBLUE ...
Hammer Price:
🔒
BARTELT (KLOCKNER) IM7-14
PACKAGING EQUIPMENT
BARTELT (KLOCKNER) IM7-14 HORIZONTAL FORM FILL AND SEAL MACHINE. MACHINE IS CAPABLE OF SPEEDS UP TO ...
Hammer Price:
🔒
JONES LEGACY HORIZONTAL AUTOMATIC LOAD CARTONER
PACKAGING EQUIPMENT
JONES LEGACY HORIZONTAL AUTOMATIC LOAD CARTONER CAPABLE OF A MAXIMUM SPEED OF APPROXIMATELY 400 CART...
Hammer Price:
🔒
IWKA SI 6
PACKAGING EQUIPMENT
IWKA SI 6 HORIZONTAL GLUE CARTONER. CAPABLE OF SPEEDS OF UP TO 60 CARTONS A MINUTE. MACHINE IS CAPAB...
Hammer Price:
🔒
2006 ALFA LAVAL MX25-BFG
CHEMICAL PROCESSING EQUIPMENT
2006 ALFA LAVAL MX25-BFG PLATE TYPE HEAT EXCHANGER, 2906 SQUARE FEET, VERTICAL. APPROXIMATE 24" WIDE...
Hammer Price:
🔒
2008 WCR INCORPORATED WCR-A891M
CHEMICAL PROCESSING EQUIPMENT
2008 WCR INCORPORATED WCR-A891M PLATE HEAT EXCHANGER, 741.1 SQUARE FEET, 316 STAINLESS STEEL, VERTIC...
Hammer Price:
🔒
HAYSSEN ULTIMAX CM-15 HPR
PACKAGING EQUIPMENT
HAYSSEN ULTIMAX CM-15 HPR CONTINUOUS MOTION WASHDOWN VERTICAL FORM FILL SEAL BAGGER. CAPABLE OF SPEE...
Hammer Price:
🔒
KLOCKNER IMC/S AUTOMATIC HORIZONTAL CARTONER
PACKAGING EQUIPMENT
KLOCKNER IMC/S AUTOMATIC HORIZONTAL CARTONER WITH POUCH TRANSFER. SET UP FOR HOT MELT GLUE CARTONS. ...
Hammer Price:
🔒
ALFA LAVAL AVNX-426B-31G
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL AVNX-426B-31G (SAME AS A PM-36000) SOLID BOWL DECANTER CENTRIFUGE, 316 STAINLESS STEEL CO...
Hammer Price:
🔒
ALFA LAVAL AVNX-616B-31G
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL AVNX-616B-31G SOLID BOWL DECANTER CENTRIFUGE, 316 STAINLESS STEEL (PRODUCT CONTACT AREAS)...
Hammer Price:
🔒
FLOTTWEG Z4D/4-454
CHEMICAL PROCESSING EQUIPMENT
FLOTTWEG Z4D/4-454 SOLID BOWL DECANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT CONTACT...
Hammer Price:
🔒
LEISTRITZ MIC 27-GL-32D
PLASTICS PROCESSING EQUIPMENT
LEISTRITZ MIC 27-GL-32D CO-ROTATING TWIN SCREW EXTRUDER. (2) 1.05" (27 MM) DIAMETER SCREWS, 32:1 L/D...
Hammer Price:
🔒
GEA WESTFALIA CTC-1-06-107
CHEMICAL PROCESSING EQUIPMENT
GEA WESTFALIA CTC-1-06-107 SOLID BOWL DISC CENTRIFUGE. 316 STAINLESS STEEL (PRODUCT CONTACT AREAS). ...
Hammer Price:
🔒
1995 ZALKIN CA3
PACKAGING EQUIPMENT
1995 ZALKIN CA3 3 HEAD ROTARY CHUCK/SNAP CAPPER. LAST RUNNING 29MM BERICAP (RICAL) #7610 CLOSURE 761...
Hammer Price:
🔒
PAUL O. ABBE AF350
MISC
PAUL O. ABBE AF350 CROSS FLOW MIXER / TWIN SHAFT FLUIDIZER. 304 STAINLESS STEEL. 12.4 CUBIC FEET WOR...
Hammer Price:
🔒
FUJI FORMOST FW3710B ALPHA III
PACKAGING EQUIPMENT
FUJI FORMOST FW3710B ALPHA III ACTIVETECH HORIZONTAL BOX MOTION WRAPPER. UNIT IS CAPABLE OF SPEEDS F...
Hammer Price:
🔒
WERNER & PFLEIDERER UK80-AES
MISC
WERNER & PFLEIDERER UK80-AES MIXER EXTRUDER, 316 STAINLESS STEEL ON PRODUCT CONTACT PARTS. WORKING C...
Hammer Price:
🔒
HARTNESS 835
PACKAGING EQUIPMENT
HARTNESS 835 AUTOMATIC DESCENDING DROP CASE PACKER. CAPABLE OF SPEEDS FROM 5 TO 25 CASES PER MINUTE ...
Hammer Price:
🔒
SHARPLES P180 SUPER-D-CANTER CENTRIFUGE
CHEMICAL PROCESSING EQUIPMENT
SHARPLES P180 SUPER-D-CANTER CENTRIFUGE GEARBOX, 47:1 RATIO...
Hammer Price:
🔒
ALFA LAVAL / SHARPLES PM-3600 SUPER-D-CANTER
MISC
ALFA LAVAL / SHARPLES PM-3600 SUPER-D-CANTER CENTRIFUGE. 316 STAINLESS STEEL CONSTRUCTION (PRODUCT C...
Hammer Price:
🔒
PEARSON CS40-G
PACKAGING EQUIPMENT
PEARSON CS40-G AUTOMATIC STAINLESS STEEL HOT MELT TOP CASE SEALER. CAPABLE OF SPEEDS UP TO 40 CASES ...
Hammer Price:
🔒
QUADRO U20
CHEMICAL PROCESSING EQUIPMENT
QUADRO U20 COLLOID MILL. APPROXIMATE CAPACITY UP TO 4250 POUNDS AN HOUR. TOP FEED, BOTTOM DISCHARGE....
Hammer Price:
🔒
2014 TRANTER GXP-042-H-5-NR-145
CHEMICAL PROCESSING EQUIPMENT
2014 TRANTER GXP-042-H-5-NR-145 PLATE HEAT EXCHANGER 677.27 SQUARE FEET SURFACE AREA. RATED 150 PSI ...
Hammer Price:
🔒
1995 AMERICAN PROCESS FZM-4S
CHEMICAL PROCESSING EQUIPMENT
1995 AMERICAN PROCESS FZM-4S TWIN SHAFT FLUIDIZED ZONE MIXER. 4.2 CUBIC FEET, 120 LITERS, CARBON STE...
Hammer Price:
🔒
ALFA LAVAL BIODIESEL / FISH OIL DESLUDGER DISC CENTRIFUGE
CHEMICAL PROCESSING EQUIPMENT
ALFA LAVAL BIODIESEL / FISH OIL DESLUDGER DISC CENTRIFUGE...
Hammer Price:
🔒