Liquidation sale to ongoing operations others

MAKINO A51 CNC HORIZONTAL MACHINING CENTER, PRO 5 CONTROL, SN 721 CNC CONTROL YES CONTROL TYPE PROFESSIONAL 5 # AXIS 4 PALLET LENGTH 15.7" PALLET WIDTH 15.7" PALLET CAPACITY 880 POUNDS PALLET INDEXING (B-AXIS) 0.001 X-AXIS TRAVEL 22" Y-AXIS TRAVEL 22" Z-AXIS TRAVEL 23.6" RAPID TRAVERSE RATE (X/Y/Z) 1,772 IPM SPINDLE TAPER CAT 40 SPINDLE SPEED 12,000 RPM SPINDLE MOTOR (HP) 25 HP TOOL CHANGER CAPACITY 60 COOLANT THROUGH SPINDLE YES MACHINE DIMENSIONS 152" X 102" X MACHINE WEIGHT 17,200 POUNDS

2021 UNIVERSAL ROBOTS UR1OE, 12.5KG X 1300MM REACH, NEVER USED IN PRODUTION, AS NEW

ABB IRB 6640 185KG/2.8M ROBOT WITH IRC5 CONTROL4

KUKA KRC4 UPGRADE BOX TO UPGRADE A KRC2 EDO5 TO KRC4, NEW IN BOX

SHARPER TEK MT-5T-8K-25KHZ ULTRASONIC CLEANING TANK ULTRASONIC FREQUENCY: 25 KHZ TANK MATERIAL: 304 STAINLESS STEEL TANK INSIDE DIMENSIONS: 48 LENGTH, 23.5 WIDE, 20 HEIGHT TANK LIQUID DIMENSIONS: 16 HEIGHT INDUSTRIAL GRADE MODEL WITH STAINLESS STEEL CONSTRUCTION INDUSTRIAL GRADE ROD TRANSDUCERS INTEGRATED FILTRATION SYSTEM WEIGHT: APPROXIMATELY 3000 LBS. WARRANTY: 1 YEAR FOR THE MACHINE. LIFETIME TECHNICAL SUPPORT DESIGNED IN ACCORDANCE WITH NFPA 79, NFPA 70, NEMA, ANSI, CFR1910, OSHA, AND THE END-USER SPECIFICATIONS. TANK DETAILS: TANK #1, THIS CLEANING TANK FEATURES ULTRASONIC CLEANING USING TWO ULTRASONIC FREQUENCY GENERATORS WITH TWO ROD TRANSDUCERS. TANK HAS A WEIR FLOW SYSTEM WHICH UTILIZES A DIVERTER BAR AND FILTRATION PUMP ALONG WITH A BELT SKIMMER TO IMPROVE EFFICIENCY OF OVERALL SYSTEM. TANK IS HEATED USING TWO HEATING ELEMENTS, WITH FLOAT SWITCHS TO ENSURE WATER LEVEL IS CORRECT FOR SAFE OPERATION OF ULTRASONICS, HEATERS AND FILTRATION SYSTEM. TANK #1 HAS AN AUTO-FILL VALVE TO MAINTAIN CORRECT WATER LEVEL IN TANK. TANK ALSO HAS CLEANING BASKET AND COVER FOR OPTIMUM PERFORMANCE. TANKS #2-3, IS A DUAL-STAGE HEATED RINSE TANK. TANK HAS A WEIR FLOW SYSTEM WHICH UTILIZES A DIVERTER BAR AND FILTRATION PUMP ALONG WITH A BELT SKIMMER TO IMPROVE EFFICIENCY OF OVERALL SYSTEM. TANKS ARE HEATED USING TWO HEATING ELEMENTS PER TANK, WITH FLOAT SWITCHS TO ENSURE WATER LEVEL IS CORRECT FOR SAFE OPERATION OF HEATERS AND FILTRATION SYSTEM. TANK #2-3 HAS AN AUTO-FILL VALVE TO MAINTAIN CORRECT WATER LEVEL IN TANK. TANK ALSO HAS RINSING BASKET AND COVER FOR OPTIMUM PERFORMANCE. TANK #4 IS A FORCED HOT AIR DRYING TANK WITH INTEGRAL DUCTING AND ELECTRIC HEAT WITH BLOWER PACKAGE. TANK ALSO HAS COVER TOO ASSIST IN DRYING PROCESS. PLC: PROGRAMMABLE CLEANING CYCLES FOR ROBUST PROCESS. PLC FAULT DETECTION DETAILS: TANK #1 FAULTS; LOW WATER LEVEL, WEIR LOW WATER LEVEL, NEED ULTRASONIC TIME ENTERED, DIRTY FILTER, WATER HIGH TEMP, BAD TEMP SENSOR. TANK #2 FAULTS; LOW WATER LEVEL, WEIR LOW WATER LEVEL, NEED FILTRATION TIME ENTERED, DIRTY FILTER, WATER HIGH TEMP, BAD TEMP SENSOR. TANK #3 FAULTS; LOW WATER LEVEL, BAD TEMP SENSOR. TANK #4 FAULTS; BAD TEMP SENSOR, HIGH TEMP.

2012 DMG AMADA WASINO S10 8-AXIS CNC MULTI-TASKING TURNING/MILLING CENTER CNC CONTROLYESTYPE OF CNC CONTROLFANUC 31I MODEL B CNC CONTROL # AXIS 8 CHUCK SIZE 6" MAX SWING OVER BED12.20" MAX TURNING DIAMETER10.24" MAX DISTANCE BETWEEN CENTERS10.63" X-AXIS (CROSS TRAVEL OF LEFT TURRET)5.91" Z-AXIS (LONGITUDINAL TRAVEL OF LEFT TURRET)13.39" MAX SPINDLE SPEED 5,000 RPM SPINDLE HORSEPOWER20 HP (30 MINUTE) / 14 HP (CONTINUOUS) S/N: 128

FERROMATIK MILACRON VISTA EDGE LV33 INJECTION MOLDER CLAMP FORCE294 KN | 33 TONS MOLD OPENING STROKE350MMMAX/MIN MOLD HEIGHT11.811" / 7.874"MAX DAYLIGHT BETWEEN PLATENS550MM OVERALL SIZE OF PLATENS340MM X 380MM DISTANCE BETWEEN TIE BARS280MM X 254MM EJECTOR STROKE80MMEJECTOR FORCE17.6 KN RETRACTION FORCE17.6 KN SCREW DIAMETER18MM MAX INJECTION PLASTIC PRESSURE2,704 BAR CYLINDER HEAD VOLUME31 CC MAX SHOT WEIGHT IN PS29 G RATE OF INJECTION PS34.2 G/S SCREW STROKE120MM ELECTRICS230/3/60APPROXIMATE MACHINE DIMENSIONS144" X 36"APPROXIMATE MACHINE HEIGHT72"APPROXIMATE MACHINE WEIGHT5,000 LBS

2010 FANUC R2000IB/165F ROBOT WITH R30IA CONTROLS

KAWASAKI RS020N 6 AXIS 20KG X 1725MM REACH ROBOTS WITH E01 CONTROLLERS AND CUBIC S. S/N: 4504

KAWASAKI RS020N ROBOTS, 6 AXIS 20KG X 1725MM REACH WITH E01 CONTROL - LIGHTLY USED KAWASAKI ROBOTS MODEL RS020N, SN 4516, 6 AXIS 20KG X 1725MM REACH ROBOTS WITH E01 CONTROLLERS AND CUBIC S

KAWASAKI RS020N ROBOTS, 6 AXIS 20KG X 1725MM REACH WITH E01 CONTROL - LIGHTLY USED KAWASAKI ROBOTS MODEL RS020N, 6 AXIS 20KG X 1725MM REACH ROBOTS WITH E01 CONTROLLERS AND CUBIC S (S/N: 4514)

KAWASAKI RS020N 6 AXIS 20KG X 1725MM REACH ROBOTS WITH E01 CONTROLLERS AND CUBIC S S/N: 4208

KAWASAKI RS020N ROBOTS, 6 AXIS 20KG X 1725MM REACH WITH E01 CONTROL - LIGHTLY USED KAWASAKI ROBOTS MODEL RS020N, SN 4212, 6 AXIS 20KG X 1725MM REACH ROBOTS WITH E01 CONTROLLERS AND CUBIC S

KAWASAKI RS010L ROBOT WITH E01 CONTROL, 10KG X 1925MM REACH, CABLES, TEACH & RISER (NEW) S/N: 3281

KAWASAKI RS010L ROBOT WITH E01 CONTROL, 10KG X 1925MM REACH, CABLES, TEACH & RISER (NEW) S/N: 3255

KAWASAKI RS010L ROBOT WITH E01 CONTROLLER, 10KG X 1925MM REACH, CABLES, TEACH PENDANT & RISER S/N: 3280

KAWASAKI RS010L ROBOT WITH E01 CONTROLLER, 10KG X 1925MM REACH, CABLES, TEACH & RISER (NEW) S/N: 3258

KAWASAKI RS010L ROBOT WITH E01 CONTROLLER, 10KG X 1925MM REACH, CABLES, TEACH & RISER (NEW), S/N: 3278

KAWASAKI RS020N ROBOT, 20KG X 1725MM REACH WITH EO1 CONTROLS, CABLES & TEACH S/N: 4599

KAWASAKI RS020N ROBOT, 20KG X 1725MM REACH WITH EO1 CONTROLS, CABLES & TEACH S/N: 4578

KAWASAKI RS020N ROBOT, 20KG X 1725MM REACH WITH EO1 CONTROLS, CABLES & TEACH S/N: 4585

KAWASAKI RS020N ROBOT, 20KG X 1725MM REACH WITH EO1 CONTROLS, CABLES & TEACH S/N: 4720

KAWASAKI RS020N ROBOT, 20KG X 1725MM REACH WITH EO1 CONTROLS, CABLES & TEACH S/N: 4598

ABB IRB 2600 ROBOT WITH IRC5 CONTROLLER, TEACH & CABLES

2022 FANUC SR-20IA WITH R-30IB CONTROLS, TEACH & CABLES S/N: F489565

2022 FANUC SR-20IA WITH R-30IB CONTROLS, TEACH & CABLES S/N: F489566

NAKAMURA-TOME SC-250 CNC LATHE WITH FANUC 21IT CONTROLS S/N:SD120798

NAKAMURA-TOME SC-250 CNC LATHE WITH FANUC 21IT CONTROLS S/N: SD120818

NAKAMURA-TOME SC-250 CNC LATHE WITH FANUC 21IT CONTROLS S/N:SD120779

2013 FUJI ANW 35 TWIN SPINDLE, TWIN TURRET WITH TAILSTOCKS CNC LATHE WITH ROBOT LOAD & UNLOAD S/N:SE0097891, FANUC OI-TD CONTROL

2013 FUJI ANW 35 TWIN SPINDLE TWIN TURRET WITH TAILSTOCKS CNC LATHE WITH ROBOT LOAD & UNLOAD S/N: SE0099125, FANUC OI-TD CONTROL, *MISSING CHIP CONVEYOR

2013 FUJI ANW 35 TWIN SPINDLE TWIN TURRET WITH TAILSTOCKS CNC LATHE WITH ROBOT LOAD & UNLOAD S/N: SE0097892 FANUC OI-TD CONTROL

2015 ABB IRB140 WITH IRC5 CONTROL, CABLES & TEACH

2015 ABB IRB140 WITH IRC5 CONTROL, CABLES & TEACH

ABB IRB140 ROBOT WITH IRC5 CONTROL, CABLES & TEACH

MAKINO A51 CNC HORIZONTAL MACHINING CENTER, PRO 5 CONTROL, CNC CONTROL YES CONTROL TYPE PROFESSIONAL 5 # AXIS 4 PALLET LENGTH 15.7" PALLET WIDTH 15.7" PALLET CAPACITY 880 POUNDS PALLET INDEXING (B-AXIS) 1 DEGREE X-AXIS TRAVEL 22" Y-AXIS TRAVEL 22" Z-AXIS TRAVEL 23.6" RAPID TRAVERSE RATE (X/Y/Z) 1,772 IPM SPINDLE TAPER CAT 40 SPINDLE SPEED 12,000 RPM SPINDLE MOTOR (HP) 25 HP TOOL CHANGER CAPACITY 60 COOLANT THROUGH SPINDLE YES MACHINE DIMENSIONS 152" X 102" X MACHINE WEIGHT 17,200 POUNDS S/N:759

2007 OKUMA HOWA 2SP-V40 TWIN SPINDLE VERTICAL TURRET LATHE CUTTING DIAMETER: 15.75 IN MAXIMUM WITH STANDARD TOOL HOLDERS, 20 IN MAXIMUM WITH SPECIAL TOOL HOLDERS CUTTING LENGTH: 17.72 IN MAXIMUM SWING: 19.69 IN MAXIMUM RAPID TRAVERSE: 78.74 FT/MIN SPINDLE SPEED: 252,500 MIN1 SPINDLE POWER: 30/25 HP CHUCK SIZE: 15 IN X-AXIS TRAVEL: 10.43 IN Z-AXIS TRAVEL: 17.72 IN TURRET CAPACITY: 12 MACHINE DIMENSIONS: 116 IN X 92 IN X 119 IN WEIGHT: 30,800 LBS

MAKINO A55 DELTA CNC HORIZONTAL MACHINING CENTER, PRO 3 CONTROL X-AXIS TRAVEL 22.05" Y-AXIS TRAVEL 22.05" Z-AXIS TRAVEL 22.05" NUMBER OF PALLETS 2 PALLET SIZE 15.7 X 15.7 PALLETS PALLET INDEXING B AXIS 1 DEGREE SPINDLE SPEEDS 14,000 RPM SPINDLE TAPER CAT 40 TOOL CHANGE 60 ATC EQUIPPED WITH: MAKINO PRO-3 CNC CONTROL (2) 15.7" X 15.7" PALLETS AUTOMATIC PALLET CHANGER 60-POSITION AUTOMATIC TOOL CHANGER THRU-SPINDLE COOLANT CHIP CONVEYOR S/N: 1026

2007 ENSHU EV530 CNC VERTICAL MACHINING CENTER S/N: 230 X 39.3" Y 20.9" Z 20" POWER 29.5 HP RPM 6,000 RPM # ATC 30 TAPER 50 TABLE-W22" TABLE-L43" # AXIS 3 FANUC 18I-TB CNC CONTROLS

HURCO VMX30 CNC VERTICAL MACHINING CENTER S/N: M342-06005013CFA

2007 HURCO VM-1 CNC VERTICAL MACHINING CENTER S/N: VM1-06037117CHALO EQUIPPED WITH HURCO ULTIMAX CNC CONTROL, 30" X 14" TABLE, RIGID TAPPING, MANUAL PULSE GENERATOR (MPG), RS-232 PORT, CENTRAL LUBRICATION SYSTEM, 16 STATION TOOL CHANGER, COOLANT SYSTEM.

2011 HAAS EC-400 CNC HORIZONTAL MACHINING CENTER HAAS CNC CONTROL, (2) 15.75" X 15.75" FULL CONTOURING PALLET W/PALLET-SHUTTLE, 8100 MAX SPINDLE RPM, THRU THE SPINDLE COOLANT, 24 POSITION AUTOMATIC TOOL CHANGER, WIPS-R, RENISHAW PROBE RECEIVER, HAAS TOUCH SETTER, CONTROL OPTIONS (EPFDM, HOME, RJH-C, RTAP-3), 80 GALLON COOLANT SYSTEM.

2015 MURATEC MJ60 CNC TURNING CENTER GANTRY LOADER WORKPIECE HANDLING CAPACITY1.18" X 5.7", UP TO 2.2 LBS/PIECE MAX PART LENGTH5.7" X-AXIS FEED RATES945 IPM Z-AXIS FEED RATES945 IPM # TOOL TURRETS 1 TOOL TURRET POSITIONS 8 SPINDLE NOSEJIS A2-5 MAX SPINDLE SPEED 4,500 RPM SPINDLE HORSEPOWER14.75 HP HYDRAULIC TAILSTOCK TAPERMT4 MACHINE CUTTING HOURS6860 ELECTRICS460/3/60APPROXIMATE MACHINE DIMENSIONS114" X 86" APPROXIMATE MACHINE HEIGHT110" APPROXIMATE MACHINE WEIGHT8,500 LBS S/N: 14KX445930001

FANUC R-2000IB/210F & 3 FANUC SYSTEM R-30IA CONTROLLERS AND TEACH PENDANT

2021 3DP 3D PLATFORM 3D PRO WORKBENCH PRO SERIES 300 3D PRINTER MISSING ONE EXTRUDER

2013 ECM TECHNOLOGIES VACUUM CARBURIZING FURNACE. THIS IS A LATE MODEL ECM TECHNOLOGIES VACUUM CARBURIZING FURNACE BUILT NEW IN 2013, PART OF A COMPLETE HEAT TREAT AND CARBURIZING LINE CONSISTING OF 3 EWN -34-75E WISCONSIN OVEN CORP ELECTRIC BATCH FURNACES WITH A MAX. TEMP OF 250 DEGREES C. AND INCLUDING THE ECM CARB FURNACE. SIEMENS PLC CONTROLS.

KUKA KRC4 UPGRADE BOX TO UPGRADE A KRC2 EDO5 TO KRC4, NEW IN BOX

KUKA KRC4 UPGRADE BOX TO UPGRADE A KRC2 EDO5 TO KRC4, NEW IN BOX

KUKA KRC4 UPGRADE BOX TO UPGRADE A KRC2 EDO5 TO KRC4, NEW IN BOX

KUKA KRC4 UPGRADE BOX TO UPGRADE A KRC2 EDO5 TO KRC4, NEW IN BOX