Joinery Woodworking Machinery Due To Consolidation Incl Saws Planers Spindle Moulders Edgebanders Compressors Extraction Units More

GEKA HYDRACROP 100 S STEEL WORKER IRON WORKER

GUILLIET TDE LARGE CAPACITY FOUR HEAD TENONER. FIRST HEAD CIRCULAR CUT OFF SAW. 2ND & 3RD HEAD TOP AND BOTTOM TENON. 4TH HEAD HEAVY DUTY 40MM DIAMETER SPINDLE SUITABLE FOR STACKABLE TOOLING.

1996 WEINIG PROFIMAT P23 FIVE HEAD PLANER MOULDER. SURFACING MAXIMUM WIDTH 230MM. FINISH 220MM. THICKNESSER MAXIMUM WIDTH 130MM. FINISH 120MM. 1ST HEAD HORIZONTAL SURFACE PLANER 5.5KW. 2ND / 3RD HEAD VERTICAL PLANING 11KW. 4TH HEAD HORIZONTAL THICKNESSING 7.5KW. 5TH HEAD HORIZONTAL 5.5KW. FEED MOTOR 2.2KW. TOTAL 33.5KW. 3 PHASE. TOTAL WORKTABLES LENGTH 3500MM. INFEED TABLE LENGTH 1970MM. SURFACE TABLE HEIGHT 880MM. OVERALL DIMENSIONS 3500MM LONG X 1550MM X 1650MM TALL. CUTTER BLOCK DIAMETER 120MM. FEED ROLLER DIAMETER 140MM. SPINDLE SPEEDS 6000RPM. SPINDLE DIAMETER 40MM STANDARD. MOTORISED HEIGHT ADJUSTMENT WITH DIGITAL READOUT WITH PNEUMATIC PRESSURED FEED WHEELS. FEED SPEED UP TO 24 METERS PER MINUTE. S/N: 123-2372

WADKIN DM/V VIBRATING MORTICER, DMV HOLLOW CHISEL MORTICER. WADKIN DM/V CHISEL MORTICER WITH SIDE STOPS. 3 PHASE. ELECTRICALLY TESTED, RUNS WELL.

WADKIN FSP 220 FOUR SIDE PLANER. SPINDLE CONFIGURATIONS 4 HEAD. WORKING WIDTH 230MM. WORKING HEIGHT 130MM. FEED SPEED 5-15 M/MIN. INFEED WORKTABLE LENGTH 2000MM. MOTOR FIRST HEAD 4KW (5.5HP). MOTOR SIDE HEADS (SHARED) 5.5KW (7.5HP). MOTOR TOP HEAD 7.5KW. 3 PHASE/ 50HZ.

2010 TREND TSM100 SPINDLE MOULDER WITH POWER FEED, FOR TREND MODULAR WINDOW SYSTEM. SPINDLE DIAMETER 30MM. 3 PHASE. 5.5KW MAIN MOTOR/50HZ. FINE ADJUSTMENT ON LEFT AND RIGHT FENCES. WEIGHT 560KG. THIS MACHINE WAS BUILT FOR TREND FOR THE PURPOSE OF THEIR TREND MODULAR WINDOW AND DOOR SYSTEM.

KUPFER MUHLE PLANER THICKNESSER 850MM, WIDE TOP & BOTTOM BEAM PLANER. PLANE AND THICKNESS UP TO 850MM (33 1/2) WIDE BELIEVED IN ONE PASS. A BEAST OF A MACHINE AND GETTING VERY RARE NOW AT THIS CAPACITY.

2004 SCM SANDYA 1/S SINGLE HEAD SANDER, THROUGH FEED. WEIGHT 660KG. 3 PHASE/ 400V/ 26A/ 50HZ.

2000 WADKIN AGS 400 RIP SAW TABLE SAW DC BRAKE. SIZE OF MAIN TABLE 1190 X 1100MM. MAXIMUM DISTANCE SAW TO RIP FENCE 914MM. MAXIMUM DIAMETER OF SAW BLADE 400MM. SAW PROJECTION WITH 400MM BLADE 50-125MM. SAW PROJECTION WITH 300MM BLADE 0-75MM. POWER OF MOTOR: STANDARD 5.5KW. OPTIONAL 7.5KW. SPINDLE SPEED 3000RMP. SPINDLE DIAMETER 30MM. APPROXIMATE FLOOR SPACE 1650 X 1250MM. APPROXIMATE NET WEIGHT 440KG.

2012 WOODMIZER HR115 SINGLE HEAD RESAW WITH IN FEED AND OUT FEED TABLES. 7.5KW / 3 PHASE ELECTRIC. SW10 SETWORKS. STATIC. ONE OWNER.

SEDGWICK CP 410 PLANER THICKNESSER 410MM 16 INCH. BRITISH BUILT SEDGWICK CP 410MM PLANER THICKNESSER. SURFACING MAXIMUM WIDTH 410MM. THICKNESSER MAXIMUM WIDTH 410MM. THICKNESSING DEPTH 230MM. REBATING DEPTH 16MM. TOTAL WORKTABLES LENGTH 1700MM. INFEED TABLE LENGTH 850MM. SURFACE TABLE HEIGHT 885MM. THICKNESSING TABLE LENGTH 1000MM. OVERALL DIMENSIONS 1950 X 1050 X 1275MM. CUTTER BLOCK DIAMETER 100MM. CUTTERBLOCK KNIVES X3. FEED ROLLER DIAMETER 51MM. FEED SPEED 4.5 / 7 METRES PER MINUTE. FENCE SIZE 900 X 140MM. CUTTERBLOCK MOTOR 3 PHASE 4KW. FEED MOTOR 0.75KW. NET WEIGHT 430KG. DUST EXTRACTION OUTLET 150MM. TOTAL AIR VOLUME REQUIRED 1450CMP. DIMENSIONS 1700 X 950 X 1265MM.

P & J 2 BAG EXTRACTOR, DUST EXTRACTION & SHAKER, FILTER SOCKS, WOODWORKING EXTRACTION. EXTERNAL RATED 3 BAG EXTRACTION SYSTEM BUILT IN THE UK BY AIRPLANTS LTD. THIS EXTRACTOR UNIT IS GALVANISED AND CONTAINS MULTI FILTER SOCKS, USED FOR WOODWORKING WASTE CHIPPING.

2004 CENTAURO CO-600 INDUSTRIAL BANDSAW WITH FENCE. MOTOR 2.2KW (3HP)/3 PHASE/ 50HZ. RPM OF WHEELS 715RPM. INDUSTRIAL QUALITY BAND SAW WITH HEAVIER, TORSIONALLY MORE RIGID STEEL FRAMES, SOLID CAST IRON WHEELS, EXPERTLY BALANCED AND RUNNING ON SEALED FOR LIFE BEARINGS. IDEAL FOR HEAVY DUTY APPLICATIONS. BANDSAW FRAME IS OF WELDED STEEL AND THE SAWBLADE IS COMPLETELY GUARDED. DISC-TYPE WHEELS IN CAST-IRON ARE EXPERTLY BALANCED AND RUN ON SEALED FOR LIFE BALL BEARINGS. FENCE WITH GRADUATED SCALE AND MAGNIFIER. ERGONOMIC TABLE TILTING UP-TO 45 DEGREES (20 DEGREES CE) TO THE RIGHT. TELESCOPIC GUARD FOR TOTAL BLADE PROTECTION. AUTOMATIC BRAKING OF WHEELS (CE): SELF-BRAKING MOTOR. FOOTBRAKE FOR NON-CE VERSION. MOTOR PROTECTION SWITCH WITH RELEASE COIL (CE). SAWBLADE TENSION INDICATOR. RACKWORK FOR RAISING AND LOWERING THE TOP GUIDE. HIGH PRECISION TOP PRECISION BLADE GUIDE. BOTTOM BLADE GUIDE WITH WOODEN INSERTS. EMERGENCY PUSH BUTTON (CE) PLACED ON THE CONTROL PANEL. CLEANING BRUSH ON BOTTOM WHEEL (CE). SAWDUST HOOD BENEATH TABLE.

2000 WADKIN BTS500 PLANER THICKNESSER

WADKIN BER4 SPINDLE MOULDER WITH POWER FEED

3 BAG EXTRACTOR, FILTER SOCKS, WOODWORKING EXTRACTION 4KW 3 PHASE 50HZ EXTERNAL RATED 3 BAG EXTRACTION SYSTEM BUILT IN THE UK BY AIRPLANTS LTD. THIS EXTRACTOR UNIT IS GALVANISED AND CONTAINS MULTI FILTER SOCKS, USED FOR WOODWORKING WASTE CHIPPING. MACHINE WILL BE SOLD CHECKED AND TESTED

2014 ALLWIN EMA-400 END MATCHING & FINGER JOINTING MACHINE WITH PRO FACE CONTROL. 3 PHASE. USED FOR END MATCHING FLOOR BOARDS.

2005 CENTAURO CVS-60/P CHAIN MORTICER. 3 PHASE/ 5.5KW/ 50HZ. TABLE WAS REMOVED FOR LARGER ITEMS BUT IS PRESENT. WILL BE CLEANED BEFORE COLLECTION.

2006 GRIGGIO FS410 PLANER THICKNESSER, BRAKED MOTOR, POWER RISE & FALL. WORKING TABLE SIZE 410MM X 2100MM. THICKNESSING TABLE 410MM X 800MM. MINIMUM THICKNESS 9MM. MAXIMUM THICKNESS 240MM. POWER RISE AND FALL OF THICKNESSING TABLE WITH DIGIT READOUT. THICKNESSING SPEEDS 6/12 M/MINUTE. MAXIMUM DEPTH OF CUT 6MM. CUTTER BLOCK DIAMETER 100MM. EXTRACTION PORT 140MM. MAIN MOTOR 5.5KW/3PHASE/11A/50HZ. GROSS WEIGHT 865KG. 201 HOURS.

WADKIN PU STRAIGHT LINE EDGER GOOD WORKING CONDITION POWERED HEAVY DUTY RIP SAW THIS HAS BEEN CLEANED CHECKED AND TESTED

SCM SANDYA UNO CS SINGLE HEAD SANDER, THROUGH FEED. CAPACITY APPROXIMATELY 900MM. WEIGHT 720KG. 3 PHASE/ 415V/ 50HZ.

WADKIN CC CROSS CUT SAW, ORIGINAL TABLES, FLIP STOP, ORIGINAL IN FEED AND OUT FEED ROLLER SUPPORT TABLE WITH HEAVY DUTY FLIP MEASURING STOPS. DC BRAKING SYSTEM FITTED. 3 PHASE / 50 HZ. / 5HP. MAXIMUM BLADE DIAMETER 457MM. MAXIMUM RISE AND FALL OF SAW 240MM. DIAMETER OF SAW SPINDLE 1 1/4. NETT WEIGHT 520KG.

70KW INDUSTRIAL SPACE HEATER, WOOD BURNER - MTM NPS70 70KW INDUSTRIAL SPACE HEATER, WOOD BURNER 3 PHASE. NPS 70 (70 KW) SOLID FUEL AIR HEATER. NPS - SOLID FUEL-DRIVEN STATIONARY FAN HEATER WITH A HEATING CAPACITY OF UP TO 70 KW (NPS70 MODEL) IS A DEVICE CHARACTERIZED BY A SIMPLE STRUCTURE AND PRINCIPLE OF OPERATION, WHILE MAINTAINING THE HIGHEST QUALITY OF WORKMANSHIP. THE ADVANTAGE OF THE HEATER IS ITS VERSATILITY - THE HEATER CAN BE POWERED BY ANY FUEL (WOOD, COAL, BRIQUETTE), AND AFTER INSTALLING THE FAN BURNER - ALSO WITH GAS, FUEL OIL, USED OIL AND PELLETS. BURNERS ARE AVAILABLE SEPARATELY. THE HEAT NEEDED TO HEAT THE OBJECT IS OBTAINED THANKS TO THE HEAT EXCHANGE BETWEEN THE FLUE GASES AND CLEAN AIR VIA A HEAT EXCHANGER. THE OPERATION OF THE DEVICE IS CONTROLLED BY A HEAT EXCHANGER THERMOSTAT, THANKS TO WHICH THE FAN TURNS ON AUTOMATICALLY WHEN THE TEMPERATURE IN THE EXCHANGER CHAMBER REACHES THE APPROPRIATE LEVEL. THE HEATER GENERATES HEAT DIRECTLY INTO THE ROOM THROUGH THE BLOWER HEAD, AND THE SMOKE AND OTHER GASES EMITTED DURING COMBUSTION ARE DISCHARGED THROUGH THE CHIMNEY. THE STATIC PRESSURE GENERATED BY THE FANS USED AND THE PRECISELY PROFILED BLOWER HEAD ENSURE THAT THE HEAT IS DISTRIBUTED QUICKLY AND EVENLY IN THE ROOM. AN UNDOUBTED ADVANTAGE OF THE DEVICE IS THE EASY TO EMPTY ASHTRAY LOCATED DIRECTLY UNDER THE COMBUSTION CHAMBER. MAIN FEATURES CHARACTERISTICS OF THE NPS 70 HEATER HIGH EFFICIENCY, COMPLETELY PURE HEAT, MANUAL IGNITION, VERY LOW OPERATING COSTS - CHEAP FUEL - WOOD WASTE (RECOMMENDED) OR OTHER AVAILABLE SOLID FUEL CAN BE USED: COAL, WOOD BRIQUETTES, IGNITION CAN TAKE PLACE AT A TEMPERATURE BELOW 0 C - NO MEDIUM THAT COULD FREEZE AT MINUS TEMPERATURE, AIR CIRCULATION CAUSED BY THE OPERATION OF THE FAN PREVENTS THE ACCUMULATION OF WARM AIR UNDER THE CEILING, THE DEVICE DOES NOT HEAT BUILDINGS, BUT ONLY THE AIR IN THEM, HIGH EFFICIENCY AND HIGH POWER - 70 KW, POSSIBILITY OF FUELING WITH SOLID FUELS (DRY WOOD). EXAMPLES OF NPS 70 HEATER APPLICATIONS WAREHOUSES, FACTORIES, PRODUCTION HALLS, ASSEMBLY PLANTS, WORKSHOPS, AGRICULTURAL AND FARM BUILDINGS.

2018 AXMINSTER TRADE SAW BENCH, WOODWORKING, JOINERY

STENNER VHM36 RESAW

GIBBS SANDTECH 4 HEAD BRUSH SANDER 600

SEDGWICK TA400 TABLE RIP SAW BRITISH BUILT SLIDING TABLE RIP SAW BLADE DIAMETER 400MM MAX DEPTH OF CUT AT 90 125MM MAX DEPTH OF CUT AT 45 85MM RIP CAPACITY 1220MM 5.5KW MOTOR. 3PHASE

TALBOTT T5/A AUTOMATIC WOOD BURNER, CHIP BURNER, AUGER FED WORKSHOP HEATER. AUTOMATED T RANGE FROM 100 TO 300KW OUTPUT. COULD BE DUCTED TO HAVE A SUMMER DUMP HEAT TO BURN WASTE AND VENT HEAT OUTSIDE. DIRECT REMOVAL FROM A LIQUIDATED WORKSHOP.

1998 PAOLONI P320 PANEL SAW, 3.2 METRE SLIDING TABLE. WEIGHT 920KG. TOTAL POWER 4.75KW/50HZ/3 PHASE.

2015 GRIGGIO UNICA 500 3200 PANEL SAW 3.2 METRE SLIDING TABLE. WEIGHT APPROXIMATELY 900KG. MAIN MOTOR POWER/50HZ/3 PHASE/400V/15A. SCORING MOTOR/50HZ/3PHASE/400V. SLIDING TABLE 3200MM. RIP FENCE READS UP TO 1610MM. MAX. DIAMETER SAW BLADE 500MM. OVERHEAD GUARD. BOARD TO CONTROL TILT NEEDS REPLACING. PREVIOUSLY USED IN A SIP CONSTRUCTION THAT REQUIRED VERTICAL CUTS ONLY.

1998 SIPA 700 TOP INDUSTRIAL BANDSAW WITH FENCE. FITTED WITH FOOT PEDAL AND DC BRAKING SYSTEM. 700 MM DIAMETER CAST FLYWHEELS. ANALOG BLADE TENSIONER. DIMENSIONS: 130 X 100 X 230 H CM. WEIGHT 400 KG. ELECTRIC SUPPLY 380 V, 3 KW POWER, 4KW MOTOR, 3 PHASE, 50HZ, 8 AMPS. FROM A FURNITURE MAKER.

2022 DANFOSS VLT FC-302 55KW INVERTER DRIVE. NEW, UNUSED OLD STOCK IN MANUFACTURERS PACKAGING. 55KW/75HP(HO) 75KW/100HP(NO). IN: 3X380-500V/50/60HZ 96/95A(HO) 133/118A(NO). OUT: 3X0-VIN 0-590HZ 106/105A(HO) 147/130A(NO). CHASSIS/IP20 TAMB. 50 DEGREES C. S/N: FC-302P55KT5P20H1XGXXXXSXXXXALB8CXXXXD0

2022 DANFOSS VLT FC-302 55KW INVERTER DRIVE, NEW, UNUSED. VLT AUTOMATION DRIVE INVERTER. NEW UNUSED OLD STOCK IN MANUFACTURERS PACKAGING. 55KW/75HP(HO) 75KW/100HP(NO) IN: 3X380-500V/50/60HZ 96/95A(HO) 133/118A(NO) OUT: 3X0-VIN 0-590HZ 106/105A(HO) 147/130A(NO) CHASSIS/IP20 TAMB. 50 DEGREES C S/N: FC-302P55KT5P20H1XGXXXXSXXXXALB8CXXXXD0

WADKIN BSS CIRCULAR TABLE SAW

HOLZTECH T1000 SPINDLE MOULDER, SLIDING TABLE AND 3 WHEELED POWER FEED WITH 2 FORWARD AND 2 REVERSE SPEEDS. 3 PHASE/50HZ/4KW. RISE AND FALL, NO TILT. S/N:

SEDGWICK TA450 TABLE RIP SAW WITH SLIDING TABLE. BRITISH BUILT RIP SAW WITH SLIDING TABLE BAR AND SUPPORT. FEATURES SLIDING CAST TABLE, CROSS CUT AND RIP FENCE, SUPPORT ARM FOR SLIDING TABLE. MACHINE SPECIFICATION; BLADE DIAMETER 450MM, BLADE TILTING 90 TO 45, MAXIMUM DEPTH OF CUT AT 90 130MM, MAXIMUM DEPTH OF CUT AT 45 70MM, DISTANCE SAW BLADE TO FENCE 600MM, MAIN TABLE SIZE 1100MM X 900MM. 5.5KW MOTOR (7.5 HP) /50HZ/3 PHASE. BRAKED MOTOR. EMERGENCY KICK STOP BUTTON AND HAND STOP BUTTON. C.E. MARKED.

SEDGWICK 3 HEAD TENONER WITH TOOLING. 3 PHASE ELECTRICS. MAIN MOTORS 2.2KW X 2.

1997 SCM HYDRO 3200 PANEL SAW 3.2 METRE SLIDING TABLE. WEIGHT APPROXIMATELY 950KG. MAIN MOTOR POWER 5.5KW/50HZ/3 PHASE/400V. SCORING MOTOR 0.75KW/50HZ/3PHASE/400V. RPM SPEED DIGITAL READOUT. HYDRAULIC RISE/FALL AND TILT. SLIDING TABLE 3200MM. RIP FENCE CAPACITY 1300MM. DIGITAL INDICATION OF BLADE SPEED RPM. TWIN BELTS WHICH ARE REPLACED AND BRAND NEW. MAX. DIAMETER SAW BLADE 400MM. MAX. DEPTH OF CUT 125MM. OVERHEAD GUARD. HYDRAULIC RISE, FALL & TILT OF BLADE. SCORING UNIT. SAWBLADE SPEED X3. MAIN MOTOR 5.5KW (7.5HP) / 3 PHASE / 50 HZ. SCORING MOTOR 0.75KW.

2022 DANFOSS VLT FC-302 AUTOMATION DRIVE INVERTER, 37KW/50HP(HO) 45KW/60HP(NO). IN: 3X380-500V/50/60HZ 66/59A(HO) 82/73A(NO). OUT: 3X0-VIN 0-590HZ 73/65A(HO) 90/80A(NO). CHASSIS/IP20 TAMB. 50 DEGREES C. S/N: B8CXXXXDO

2022 DANFOSS VLT FC-302 15KW INVERTER DRIVE. 15KW/20HP(HO) 18.5KW/25HP(NO) N:3X380-500V 50/60HZ 29/25A(HO) 34/31A(NO) OUT: 3X0-VIN 0-590HZ 32/27 A (HO) 37.5/34A(NO) CHASSIS/ IP20 TAMB. 50DEGREES C /122F

2022 DANFOSS VLT FC-302 15KW INVERTER DRIVE. 15KW/20HP(HO) 18.5KW/25HP(NO) N:3X380-500V 50/60HZ 29/25A(HO) 34/31A(NO) OUT: 3X0-VIN 0-590HZ 32/27 A (HO) 37.5/34A(NO) CHASSIS/ IP20 TAMB. 50DEGREES C /122F

2022 DANFOSS VLT FC-302 15KW INVERTER DRIVE. 15KW/20HP(HO) 18.5KW/25HP(NO) N:3X380-500V 50/60HZ 29/25A(HO) 34/31A(NO) OUT: 3X0-VIN 0-590HZ 32/27 A (HO) 37.5/34A(NO) CHASSIS/ IP20 TAMB. 50DEGREES C /122F

DANFOSS VLT FC-302 INVERTER DRIVE, 37KW, NEW, UNUSED. 37KW/50HP(HO) 45KW/60HP(NO). IN: 3X380-500V/50/60HZ 66/59A(HO) 82/73A(NO). OUT: 3X0-VIN 0-590HZ 73/65A(HO) 90/80A(NO). CHASSIS/IP20 TAMB. 50 DEGREES C. S/N: FC-302P37KT5P20H1XGXXXXSXXXXALB8CXXXXDO

2022 SIEMENS 6SL3210-1PE24-5ALO INVERTER DRIVE, NEW, UNUSED, 22KW. INPUT: 3AV 380V - 480V 47 - 63HZ 43A. MOTOR: IEC 22KW. SINAMICS POWER MODULE PM240-2. S/N: T-P831700793

WADKIN BEL SPINDLE MOULDER WITH POWER FEED, 3 PHASE

2001 STETON EURA 45 FOUR SIDED PLANER. ONE OWNER FROM NEW. WORKING ORDER. SURFACING MAXIMUM WIDTH 230MM. FINISH 220MM. THICKNESSER MAXIMUM WIDTH 130MM. FINISH 120MM. TOTAL 15KW. 30AMP. 3 PHASE. 50HZ. SPINDLE DIAMETER 40MM STANDARD. S/N: 25907006

M POWER CROSS CUT SAW 3 PHASE

15 KW THREE PHASE SCREW COMPRESSOR SILENT RUNNING. 15KW (20HP) 3 PHASE. HOURS 54,181. JUST REMOVED IN GOOD WORKING ORDER.

WADKIN NV 300 PROFILE GRINDER COMES WITH ORIGINAL MANUAL CLEANED, CHECKED & TESTED

2022 SIEMENS 6SL3210-1PE24-5ALO INVERTER DRIVE, NEW, UNUSED, 22KW. SINAMICS POWER MODULE PM240-2. INPUT: 3AV 380V - 480V 47 - 63HZ 43A. MOTOR: IEC 22KW. GROSS WEIGHT 21.4KG. S/N: T-P831700793