Quarterly Bakery Processing and Packaging Equipment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
215
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
SAFELINE | V48 RAD |
SAFELINE V48 RAD METAL DETECTOR WITH 17.5"W X 5.5"H APERTURE ON STAINLESS STEEL FRAME. FEATURES STOP BELT REJECT, 7 FEET LONG X 15 INCHES WIDE PLASTIC MAT TOP BELT. ELECTRICAL: 230/460 VOLTS, 60 HZ, 3 PHASE. STAINLESS STEEL FRAME.
|
🔒 Subscribe | |
|
|
ECONOSEAL | E2000 |
ECONOSEAL E2000 CARTONER WITH INFEED CONVEYOR - USED ECONOSEAL HORIZONTAL CARTONER WITH: SPEED: UP TO 1500 CARTONS PER HOUR DEPENDING ON CARTON SIZE AND APPLICATION MINIMUM CARTON DIMENSIONS: LENGTH: 1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES MAXIMUM CARTON DIMENSIONS: LENGTH: 12 INCHES WIDTH: 4 INCHES HEIGHT: 12 INCHES INFEED HEIGHT: 38 INCHES DISCHARGE HEIGHT: 32.5 INCHES BUCKET DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.5 INCHES HEIGHT: 4.5 INCHES BUCKET CENTERS: 5.5 INCHES MAGAZINE DIMENSIONS: LENGTH: 9.5 INCHES WIDTH: 8.5 INCHES AIR REQUIREMENTS: 80 PSI ELECTRICAL: 1 PHASE, 60 HZ, 220 VOLTS PREVIOUSLY USED IN BEVERAGE APPLICATION
|
🔒 Subscribe | |
|
|
HAMER FISCHBEIN | PBC 6000 |
HAMER FISCHBEIN PBC 6000 CONTINUOUS BAND BAG SEALER - USED FISCHBEIN BAG SEALER WITH: PRODUCTION THROUGHPUT: RUNNING UP TO 11 BAGS PER MINUTE @ 40 - 50 POUNDS PER BAG SPEED: UP TO 85 FEET PER MINUTE, DEPENDING ON PRODUCT AND APPLICATION BAG SIZE RANGE: LENGTH: UP TO 56 INCHES WIDTH: VARIABLE MINIMUM FREE TOP: 6 INCHES MAXIMUM FOLD: 1.875 INCHES OVERHEAT SENSOR PUSH BUTTON CONTROLS APPROXIMATE OVERALL DIMENSIONS: LENGTH: 64 INCHES WIDTH: 48 INCHES HEIGHT: 81 INCHES MOUNTED ON ADJUSTABLE HEIGHT FRAME WITH CASTERS MINIMUM AIR CONSUMPTION: 420 SQUARE CUBIC FEET PER HOUR AIR REQUIREMENTS: 90 PSI ELECTRICAL: 3 PHASE, 60 HZ, 460 VOLTS, 10 AMPS PREVIOUSLY USED IN PRE-GLUED POPCORN KERNEL BAG SEALING APPLICATION S/N:
|
🔒 Subscribe | |
|
|
ECONOCORP | E2000 |
2000 ECONOCORP E2000 CARTONER 8415 HAND LOAD CARTONER WITH: PRODUCTION OUTPUT RATE: UP TO 25 CARTONS PER MINUTE, DEPENDING ON APPLICATION MINIMUM CARTON DIMENSIONS: 1 LENGTH X 0.75 WIDTH X 2.5 HEIGHT (INCHES) MAXIMUM CARTON DIMENSIONS: 12 LENGTH X 4 WIDTH X 12 HEIGHT (INCHES) FOUR (4) SPARE CARTON MAGAZINES ALLEN BRADLEY MICROLOGIX 1000 CONTROLLER INTERMITTENT MOTION ELECTRICALS: PHASE: 1 VOLTAGE: 220 AMPERAGE: 10 FREQUENCY: 60 HERTZ OVERALL DIMENSIONS: 68 LENGTH X 35 WIDTH X 57 HEIGHT (INCHES) S/N: 8415
|
🔒 Subscribe | |
|
|
ADMIX | UNKNOWN |
600 GALLON SINGLE WALL MIX TANK WITH ADMIX HIGH SHEAR MIXER. CAPACITY: 600 GALLONS. ADMIX HIGH SHEAR MIXER. TOP MOUNTED MANWAY. MULTIPLE TOP MOUNTED TRI CLAMP PORTS. DOME TOP DISH BOTTOM. BOTTOM CENTER DISCHARGE: 3.5 INCH TRI CLAMP. 15 HORSEPOWER MIXER MOTOR. ELECTRICAL: VOLTS: 230/460, FREQUENCY: 60 HZ, PHASE 3. STAINLESS STEEL CONSTRUCTION. S/N: UNKNOWN
|
🔒 Subscribe | |
|
|
2020 | METTLER TOLEDO | SL1500 |
2020 METTLER TOLEDO SL1500 METAL DETECTOR. CONVEYOR-MOUNTED INSPECTION SYSTEM DESIGNED TO RELIABLY IDENTIFY METAL CONTAMINANTS IN PACKAGED OR BULK PRODUCTS. DURABLE STAINLESS-STEEL FRAME AND WASHDOWN-CAPABLE COMPONENTS, SUITABLE FOR FOOD AND PHARMACEUTICAL ENVIRONMENTS. INTEGRATES A VARIABLE-SPEED CONVEYOR AND AIR-REJECT MECHANISM FOR EFFICIENT PRODUCT FLOW AND AUTOMATED REMOVAL OF DETECTED CONTAMINANTS. WORKING APERTURE: 4-7/8 INCHES TALL X 15-3/4 INCHES WIDE. TOTAL APERTURE: 6 INCHES TALL X 15-3/4 INCHES WIDE. BELT STOP REJECT. ELECTRICAL REQUIREMENTS: 120 VOLTS. APPROXIMATE OVERALL DIMENSIONS: 52 INCHES WIDE X 40 INCHES LONG X 45 INCHES TALL. S/N: 144667
|
🔒 Subscribe |
|
|
ECONOCORP | E-2000 |
ECONOCORP E-2000 AUTOMATIC HORIZONTAL CARTONER. INTERMITTENT MOTION. PRODUCTION OUTPUT RATE: UP TO 25 CARTONS PER MINUTE. HOT MELT GLUE. CARTON ERECTED AT A SINGLE PRODUCT LOAD STATION. AUTOMATIC LOADING FROM CARTON MAGAZINE. PLC CONTROLS. AIR REQUIREMENTS: 80 POUNDS PER SQUARE INCH, 3.2 CUBIC FEET PER MINUTE. MINIMUM CARTON DIMENSIONS: 1 LENGTH X 0.75 WIDTH X 2.5 DEPTH (INCHES). MAXIMUM CARTON DIMENSIONS: 12 LENGTH X 4 WIDTH X 12 DEPTH (INCHES). POWERED INFEED. ELECTRICALS: 220 VOLTAGE / 1 PHASE / 50-60 HERTZ. PREVIOUSLY USED TO PACKAGE PIZZA INTO CARTONS. S/N: 8305
|
🔒 Subscribe | |
|
|
ECONOSEAL | E2000 |
2000 ECONOSEAL E2000 AUTOMATIC STAINLESS STEEL HORIZONTAL CARTONER. SPEED: UP TO 25 CARTONS PER MINUTE, DEPENDING ON CARTON SIZE AND APPLICATION. MINIMUM CARTON DIMENSIONS: LENGTH: 1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES. MAXIMUM CARTON DIMENSIONS: LENGTH: 12 INCHES WIDTH: 4 INCHES HEIGHT: 12 INCHES. INFEED HEIGHT: 38 INCHES. DISCHARGE HEIGHT: 32.5 INCHES. BUCKET DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.5 INCHES HEIGHT: 4.5 INCHES. BUCKET CENTERS: 5.5 INCHES. MAGAZINE DIMENSIONS: LENGTH: 9.5 INCHES WIDTH: 8.5 INCHES. AIR REQUIREMENTS: 80 PSI. ELECTRICAL: 1 PHASE, 60 HZ, 220 VOLTS. PREVIOUSLY USED IN BEVERAGE APPLICATION.
|
🔒 Subscribe | |
|
|
HOBART | V-1401 |
HOBART V-1401 140 QUART PLANETARY MIXER WITH PADDLE, BOWL, AND GUARD. 140 QUART BOWL CAPACITY, 4 SPEED SETTINGS. OVERALL DIMENSIONS (INCHES): LENGTH: 60 WIDTH: 31 HEIGHT: 70. POWER BOWL LIFT, GEAR-DRIVEN TRANSMISSION, STAINLESS STEEL BOWL GUARD, PADDLE MIXER ATTACHMENT. ELECTRICAL: 230 V / 60 HZ / THREE PHASE. MODEL: V-1401V
|
🔒 Subscribe | |
|
|
PACK LEADER | PL-221 |
PACK LEADER PL-221 TOP AND BOTTOM PRESSURE SENSITIVE LABELER. MAXIMUM DISPENSING AND CONVEYOR SPEED: UP TO 131.2 FEET PER MINUTE. MAXIMUM LABEL SIZE: LENGTH: 11.8 INCHES WIDTH: 6 INCHES. MAXIMUM CONTAINER DIMENSIONS: WIDTH: 6.5 INCHES HEIGHT: 6 INCHES. MAXIMUM LABEL SPOOL DIAMETER: 14 INCHES. INNER CORE DIAMETER: 3 INCHES. DELTA TOUCH SCREEN HMI. MISSING LABEL DETECTION. PRODUCTION PRESET AND LABEL COUNT FUNCTIONS. OVERALL DIMENSIONS: LENGTH: 68.75 INCHES WIDTH: 32 INCHES HEIGHT: 66 INCHES. 304 STAINLESS STEEL CONSTRUCTION. STEPPER MOTOR: 1 HORSEPOWER. ELECTRICAL: 1 PHASE, 60 HZ, 110 VOLTS. PREVIOUSLY USED IN CHEESE PACKAGING APPLICATION. S/N: PL-221
|
🔒 Subscribe | |
|
|
HOBART | V-1401 |
1970 HOBART V-1401 140 QUART PLANETARY MIXER WITH GUARD AND BOWL. BOWL CAPACITY: 140 QUARTS. SPEED SETTINGS: 4. OVERALL DIMENSIONS (INCHES): LENGTH: 60 WIDTH: 31 HEIGHT: 70. POWER BOWL LIFT. GEAR-DRIVEN TRANSMISSION. STAINLESS STEEL BOWL GUARD. BOWL TROLLEY. PADDLE. ELECTRICAL: 230 V / 60 HZ / THREE PHASE. S/N: V1401
|
🔒 Subscribe | |
|
|
ABS | SM-200T |
ABS SM-200T 200 KILOGRAM SPIRAL MIXER - HEAVY-DUTY COMMERCIAL SPIRAL DOUGH MIXER BUILT FOR CONSISTENT, HIGH-VOLUME DOUGH PRODUCTION IN PROFESSIONAL BAKERIES AND FOOD OPERATIONS. PROVIDES RELIABLE, UNIFORM MIXING WITH INTUITIVE CONTROLS THAT SUPPORT BOTH AUTOMATED AND MANUAL OPERATION. RUGGED CONSTRUCTION AND SAFETY-FOCUSED DESIGN MAKE IT WELL SUITED FOR DEMANDING, DAILY USE IN PRODUCTION ENVIRONMENTS. DOUGH CAPACITY: 200 KILOGRAMS INTERIOR BOWL DIMENSIONS: 36 INCH DIAMETER X 20 INCHES DEEP STAINLESS STEEL BOWL EMERGENCY E STOP ELECTRICAL REQUIREMENTS: 220 VOLTS / 60 HERTZ / 3 PHASE S/N: 1003004
|
🔒 Subscribe | |
|
|
2016 | ULTRASOURCE | ULTRA VAC 1000 |
2016 ULTRASOURCE ULTRA VAC 1000 DUAL CHAMBER VACUUM SEALER. COMMERCIAL-GRADE PACKAGING MACHINE FOR HIGH-VOLUME FOOD OPERATIONS. DUAL-CHAMBER DESIGN FOR INCREASED THROUGHPUT. STAINLESS STEEL CONSTRUCTION. FEATURES (2) 39 INCH LONG SEAL BARS, 10 MILLIMETER WIDE BAND SEALING, 12 HORSEPOWER INDUSTRIAL VACUUM PUMP, NEMA 4 CONTROL PANEL. ELECTRICAL REQUIREMENTS: 240 VOLTS / 3 PHASE / 60 HERTZ. S/N: PF15100906
|
🔒 Subscribe |
|
|
METTLER TOLEDO | V4-RAD |
METTLER TOLEDO SAFELINE COMBINATION METAL DETECTOR CHECKWEIGHING SYSTEM - USED METTLER TOLEDO CHECK WEIGH AND METAL DETECTOR WITH: PREVIOUS APPLICATION: 6 AND 15 OUNCE CONTAINERS INFEED/DISCHARGE: 32 INCHES HIGH CONVEYOR WIDTH: 2.5 INCHES AFFECTIVE APERTURE: HEIGHT: 10.5 INCHES WIDTH: 7.75 INCHES TOTAL APERTURE: 11.5 INCHES CHECK WEIGH LENGTHS: 5.75 INCHES 7 INCHES 4.5 INCHES 2 PUSH BAR REJECTS, ONE FOR EACH DETECTION TOUCH SCREEN HMI ELECTRICALS: 3 PHASE, 480 VOLTS, 50/60 HERTZ OVERALL DIMENSIONS: LENGTH: 4 FEET WIDTH: 12 FEET HEIGHT: 7.5 FEET STAINLESS STEEL CONSTRUCTION MODEL: V4-RAD
|
🔒 Subscribe | |
|
|
LOCK INSPECTION SYSTEMS | MET 30+ |
LOCK INSPECTION SYSTEMS MET 30+ STAINLESS STEEL METAL DETECTOR - USED LOCK METAL DETECTOR WITH: WORKING APERTURE DIMENSIONS: WIDTH: 13.5 INCHES HEIGHT: 6.5 INCHES CONVEYOR BELT DIMENSIONS: LENGTH: 72 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 34 INCHES DISCHARGE HEIGHT: 36 INCHES PRODUCTION FLOW: LEFT TO RIGHT VARIABLE SPEED DRIVE PUSH BUTTON CONTROLS PNEUMATIC PUSH ARM REJECT MOTOR: 0.33 HORSEPOWER PREVIOUSLY USED IN BAKERY APPLICATION
|
🔒 Subscribe | |
|
|
B N | PM-MINI-100 |
2007 B N PM-MINI-100 PREMADE BAG HORIZONTAL FORM FILL AND SEAL. BAG DIMENSIONS: 4 TO 12 INCHES, 5 TO 16 INCHES. PACKAGE WEIGHT: 2 OZ TO 5.5 LBS. MADE FROM 304 STAINLESS STEEL. INTEGRATED INKJET PRINTER AND DATE CODER WITH TOUCHSCREEN AND PC SOFTWARE. CAN INFLATE BAG BEFORE SEALING AND COOL BAG AFTER SEALING. TAKES BAG FROM MAGAZINE, OPENS, PLACES UNDER FUNNEL, DEPOSITS PRODUCT, SEALS BAG.
|
🔒 Subscribe | |
|
|
PREMADE BAG HORIZONTAL FORM FILL AND SEAL WITH: BAG DIMENSIONS: WIDTH: 4 TO 8 INCH HEIGHT: 5 TO 12 INCH 304 STAINLESS STEEL THE PREMADE BAG MACHINE TAKES A BAG FROM THE BAG MAGAZINE, OPENS THE BAG, PLACES IT UNDER THE DEPOSITING FUNNEL. AFTER THE PRODUCT GETS DEPOSITED INTO THE BAG, THE MACHINE SEALS THE BAG.
|
🔒 Subscribe | |||
|
|
SOUTHBEND | SLEB/20SC |
SOUTHBEND SLEB/20SC STAINLESS STEEL ELECTRIC DOUBLE DECK OVEN - HEAT RANGE: 140 F TO 500 F. WIRE RACK GUIDE CENTERS: 1.625 INCHES. SOLID STATE THERMOSTAT. MECHANICAL COOK TIMER UP TO 60 MINUTES. RACK GUIDE POSITIONS: 11. NUMBER OF PLATED OVEN RACKS PER DECK: 5. INTERIOR OVEN DIMENSIONS: 29" W X 29" D X 20" H. RACK CLEARANCE: 28.25" W X 27.25" D. PORCELAIN ENAMEL INTERIOR: COVED AND FASTENER FREE. FORCED COOL DOWN FAN MODE. OVEN "HEAT" LIGHT CYCLES WITH BURNERS. INTERIOR OVEN LIGHTS. SLIDE OUT CONTROL PANEL. OVERALL DIMENSIONS: 38" W X 43.5" D X 64" H. MOUNTED ON CASTERS. STAINLESS STEEL EXTERIOR. 2-SPEED MOTOR. DUAL FAN MOTORS: 0.5 HORSEPOWER. NEVER PUT INTO PRODUCTION.
|
🔒 Subscribe | |
|
|
THERMO SCIENTIFIC | APEX 500 |
THERMO SCIENTIFIC APEX 500 METAL DETECTOR WITH NILFISK VACUUM. APERTURE SIZES: 6 WIDTH X 4 HEIGHT INCHES. MAXIMUM PRODUCT SIZE: 5.5 WIDTH X 2.5 HEIGHT INCHES. METAL DETECTOR CHAIN LENGTH: 83 INCHES. WEIGH CELL CHAIN LENGTH: 84.625 INCHES. REJECT SECTION CHAIN LENGTH: 67.875 INCHES. RAMSEY VERSA CHECKWEIGHER. NILFISK VACUUM. ELECTRICALS: VOLTAGE: 120-230 FREQUENCY: 50/60 HERTZ AMPERAGE: 0.40.
|
🔒 Subscribe | |
|
|
5 CUBIC FOOT STAINLESS STEEL RIBBON BLENDER WITH DRIVE MOTOR. MIXER RPM: 46. CHAMBER DIMENSIONS: LENGTH: 18 INCHES, WIDTH: 32 INCHES, DEPTH: 22 INCHES. OVERALL DIMENSIONS: LENGTH: 61 INCHES, WIDTH: 29 INCHES, HEIGHT: 44 INCHES. DISCHARGE: BOTTOM-CENTER, DISCHARGE DIAMETER: FLANGED: 4.5 INCHES, INSIDE DIAMETER: 3.5 INCHES. AGITATION: DUAL RIBBON, SINGLE SHAFT. MOUNTED ON FLANGED FEET. CONSTRUCTION: STAINLESS STEEL. MOTOR: 3 HP, MOTOR ELECTRICAL: 230/460 V, 60 HZ, THREE PHASE.
|
🔒 Subscribe | |||
|
|
RONDO |
RONDO SEMI AUTOMATIC DOUGH ROUNDER. DIVIDES AND ROUNDS DOUGH INTO 36 EQUAL PARTS. INDIVIDUAL DOUGH WEIGHT RANGE: 1 TO 4 OUNCES. BULK DOUGH WEIGHT RANGE: 3 TO 9 POUNDS. CAST IRON BASE.
|
🔒 Subscribe | ||
|
|
THERMO SCIENTIFIC | APEX 500 |
THERMO SCIENTIFIC APEX 500 METAL DETECTOR WITH NILFISK VACUUM. APERTURE SIZES: 6 WIDTH X 4 HEIGHT INCHES. MAXIMUM PRODUCT SIZE: 5.5 WIDTH X 2.5 HEIGHT INCHES. METAL DETECTOR CHAIN LENGTH: 83 INCHES. WEIGH CELL CHAIN LENGTH: 84.625 INCHES. REJECT SECTION CHAIN LENGTH: 67.875 INCHES. INCLUDES RAMSEY VERSA CHECKWEIGHER AND NILFISK VACUUM. ELECTRICALS: VOLTAGE: 120-230, FREQUENCY: 50/60 HERTZ, AMPERAGE: 0.40.
|
🔒 Subscribe | |
|
|
MOISTTECH CORP. | 3000 |
MOISTTECH CORP. 3000 STAINLESS STEEL NEAR-INFRARED MOISTURE SENSOR. MOISTURE RANGES DEPENDING ON APPLICATION: 0 - 0.1% PPM 0 - 100% PPM. MEASURED NIR CONSTITUENTS: 1, 2, 3 MOISTURE, OIL, COATING, ETC. ACCURACY: 0.01% DEPENDING ON APPLICATION. OPTICAL MEASUREMENT DISTANCE: BETWEEN 4 AND 16 INCHES. SAMPLING SIZE DIAMETER: APPROXIMATELY 1.5 INCHES. OPERATING TEMPERATURE: BETWEEN 0 - 130 F. KINCO TOUCH SCREEN HMI. APPROXIMATE OVERALL DIMENSIONS: LENGTH: 12.1 INCHES WIDTH: 7.1 INCHES HEIGHT: 6.4 INCHES. CAST ALUMINUM, IP65, STAINLESS STEEL CONSTRUCTION. ELECTRICAL: 50/60 HZ, 80-260 VOLTS. S/N:
|
🔒 Subscribe | |
|
|
SAFELINE | POWERPHASE |
SAFELINE POWERPHASE STAINLESS STEEL SMOOTH BELT CONVEYOR METAL DETECTOR. WORKING APERTURE: 19.5 INCH WIDTH, 7.25 INCH HEIGHT. CONVEYOR BELT: 144 INCH LENGTH, 16 INCH WIDTH. INFEED/DISCHARGE HEIGHT: 35 INCH. FEATURES PUSH-ARM REJECT, VARIABLE FREQUENCY DRIVE, PUSH BUTTON CONTROLS. OVERALL DIMENSIONS: 145 INCH LENGTH, 55 INCH WIDTH, 43 INCH HEIGHT. PAINTED STEEL FRAME MOUNTED ON CASTERS. STAINLESS STEEL CONSTRUCTION. PREVIOUSLY USED IN BAKERY APPLICATION.
|
🔒 Subscribe | |
|
|
HOBART | D300 |
USED HOBART D300 PLANETARY MIXER 30 QUARTS. THIS COMMERCIAL MIXER HAS A 30-QUART CAPACITY, MULTIPLE SPEED SETTINGS, AND PLANETARY MIXING ACTION FOR THOROUGH AND EVEN MIXING. FEATURES INCLUDE MANUAL BOWL LIFT, GEAR-DRIVEN TRANSMISSION, 15-MINUTE TIMER, AND A 0.75 HORSEPOWER MOTOR. IDEAL FOR EGG WHITES, MASHED POTATOES, MAYONNAISE, WHIPPED CREAM, CAKE, DOUGH, PASTA, ICING, ETC. ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE. S/N:
|
🔒 Subscribe | |
|
|
STAINLESS STEEL RIBBON BLENDER WITH DRIVE MOTOR - USED RIBBON BLENDER WITH: CAPACITY: 5 FEET3 MIXER RPM: 46 CHAMBER DIMENSIONS: LENGTH: 18 INCHES WIDTH: 32 INCHES DEPTH: 22 INCHES OVERALL DIMENSIONS: LENGTH: 61 INCHES WIDTH: 29 INCHES HEIGHT: 44 INCHES DISCHARGE: BOTTOM-CENTER DISCHARGE DIAMETER: FLANGED: 4.5 INCHES INSIDE DIAMETER: 3.5 INCHES AGITATION: DUAL RIBBON SINGLE SHAFT MOUNTED ON FLANGED FEET CONSTRUCTION: STAINLESS STEEL MOTOR: 3 HP MOTOR ELECTRICAL: 230/460 V, 60 HZ, THREE PHASE
|
🔒 Subscribe | |||
|
|
MEPACO | TB170 |
MEPACO TB170 00505 50 GALLON STAINLESS STEEL SINGLE SHAFT RIBBON BLENDER WITH: INTERIOR TANK DIMENSIONS: 15 INCH WIDE X 44 INCH LONG MIXING PADDLES: 2 INCH X 12 INCH (2) TOP INLETS: 5 INCH DIAMETER BOTTOM SIDE DISCHARGE: 5 INCH DIAMETER JACKET: -20 DEGREES FAHRENHEIT AT 90 PSIG MAXIMUM ALLOWABLE WORKING PRESSURE: 90 PSIG AT 350 DEGREES FAHRENHEIT MOTOR HORSEPOWER: _____ ELECTRICAL REQUIREMENTS: 230/480 VOLTS LAST PRODUCT RAN: HEMP S/N: 00505
|
🔒 Subscribe | |
|
|
STAINLESS STEEL DOUGH CHUNKER W/ TAKEAWAY CONVEYANCE SYSTEM - USED DOUGH CHUNKER WITH: GRADED CAPACITY: 1500 POUNDS OF DOUGH HOPPER DIMENSIONS: 60 LENGTH X 53 WIDTH X 19 DEPTH (INCHES) INFEED HEIGHT: 42 INCHES AGITATION DIMENSIONS (INCHES): LENGTH: 60 HEIGHT: 3 FLIGHT: 8 PLASTIC MAT-TOP DISCHARGE BELT: 70 LENGTH X14 HEIGHT (INCHES) SUPPORT CONVEYANCE: WIDTH: 25 122 INCH SECTION 72 INCH SECTION 187 INCH SECTION 71 INCH SECTION ELEVATING SECTION: 136 LENGTH OUT TO 45 INCHES 144 INCH DISCHARGE STAINLESS STEEL CONSTRUCTION PUSH BUTTON CONTROLS CHAIN DRIVEN MOTOR: HORSEPOWER: (2) 0.5, (1) 1.5 RPM: 1740, 1730 ELECTRICAL: 3 PHASE, 60 HERTZ, 480 VOLTS, 30 AMPS LAST APPLICATION: CHUNKING DOUGH. THE SYSTEM HAS WHEELS TO MOVE BACK AND FORTH BETWEEN MIXERS ON A TRACK. THE SUPPORT CONVEYANCE WAS SET UP TO PINCH THE DOUGH AND ELAVATE THE CHUNKED DOUGH INTO DIFFERENT LINES INTO THE FACILITY.
|
🔒 Subscribe | |||
|
|
CHAMPION | 65S ETL |
CHAMPION 65S ETL AUTOMATIC COOKIE DOUGH DEPOSITOR. DESIGNED FOR HIGH-SPEED, CONSISTENT PORTIONING OF COOKIE DOUGH AND SIMILAR PRODUCTS. AUTOMATES THE DEPOSITING PROCESS TO ENSURE UNIFORM WEIGHT AND SHAPE, IMPROVING EFFICIENCY AND PRODUCT QUALITY. HANDLES A VARIETY OF DOUGH CONSISTENCIES, SUITABLE FOR SMALL-BATCH AND LARGE-SCALE BAKERY PRODUCTION. IDEAL FOR COMMERCIAL BAKERIES, STREAMLINES PRODUCTION WHILE MAINTAINING PRECISE CONTROL OVER PORTION SIZES. OUTPUT: 35 TO 70 STROKES PER MINUTE (DEPENDING ON PRODUCT). VARIABLE SPEED MOTOR FOR 90 TO 1,200 DOZEN COOKIES PER HOUR. HOPPER CAPACITY: 30 QUARTS. MAXIMUM PAN WIDTH: 19 INCHES WIDE. AREA FOR TRAYS: 22 INCHES WIDE X 68 INCHES LONG. HOPPER DIMENSIONS: 16 INCHES LONG X 9 INCHES WIDE X 10 INCHES DEEP. VARIABLE SPEED CONTROLLER. CONVEYOR: 1/2 HORSEPOWER. ADJUSTABLE KNOB FOR COOKIE THICKNESS. STAINLESS STEEL HOPPER. ELECTRICAL REQUIREMENTS: 120 VOLTS. APPROXIMATE OVERALL DIMENSIONS: 66 INCHES LONG X 32 INCHES WIDE X 56 INCHES TALL. S/N:
|
🔒 Subscribe | |
|
|
URANIA | 5000 P |
1999 URANIA 5000P VERTICAL CONTINUOUS BAND BAG SEALER - USED URANIA BAG SEALER WITH: MODEL: 5000 P SPEED RANGE: 100 TO 600 INCHES PER MINUTE (DEPENDING ON BAG THICKNESS) CAPABLE OF VERTICAL OR HORIZONTAL SEAL SEALING BELTS: TEFLON COATED FIBERGLASS TEMPERATURE OF OPERATION: 100 TO 300 DEGREES CELSIUS ALLEN BRADLEY PANELVIEW PLUS 1000 304 STAINLESS STEEL CASTERS ELECTRICALS: 115 VAC / 60 HZ / 15 A S/N:
|
🔒 Subscribe | |
|
|
QUANTUM | QTMC4000 |
QUANTUM QTMC4000 SAUCE DEPOSITOR. HIGH-PRECISION MACHINE DESIGNED FOR ACCURATE AND EFFICIENT SAUCE PORTIONING IN VARIOUS FOOD PRODUCTION PROCESSES. OFFERS ADJUSTABLE SETTINGS FOR PORTION SIZES, ALLOWING FOR CUSTOMIZABLE DEPOSITS TO MEET SPECIFIC PRODUCTION NEEDS. USER-FRIENDLY INTERFACE AND HYGIENIC DESIGN MAKE IT EASY TO OPERATE AND CLEAN, ENSURING SMOOTH, HIGH-VOLUME PRODUCTION. IDEAL FOR SAUCES, DRESSINGS, AND OTHER SEMI-LIQUID PRODUCTS, IT ENHANCES CONSISTENCY AND REDUCES WASTE IN FOOD MANUFACTURING OPERATIONS. PRODUCTION RATES (PIZZA): 6 INCH DIAMETER: 110 PIZZAS PER MINUTE 8 INCH DIAMETER: 110 PIZZAS PER MINUTE 10 INCH DIAMETER: 96 PIZZAS PER MINUTE 12 INCH DIAMETER: 80 PIZZAS PER MINUTE 14 INCH DIAMETER: 68 PIZZAS PER MINUTE 16 INCH DIAMETER: 60 PIZZAS PER MINUTE. 7 GALLON CONICAL HOPPER. CONVEYOR DIMENSIONS: 25 INCHES LONG X 20 INCHES WIDE. IDEAL APPLICATION: PIZZA SAUCE, BBQ SAUCE, CHEESE SAUCE, AND RANCH DRESSING. ELECTRICAL REQUIREMENTS: 200-240 VOLTS, 1 PHASE, 5 AMPS. S/N:
|
🔒 Subscribe | |
|
|
OHLSON | 8M2 |
OHLSON 8M2 STAINLESS STEEL 8 HEAD LINEAR BUCKET SCALE WITH: MAX FILLING CAPACITY: 6 POUNDS WEIGHING RESOLUTION: 0.002 POUNDS NUMBER OF FILL HEADS: 8 INFEED HEIGHT: 92 INCHES HOPPER SIZE: LENGTH: 73 INCHES WIDTH: 17.5 INCHES FEEDER: LENGTH: 16 INCHES WIDTH: 7.5 INCHES FILLER HOPPER DIMENSIONS: LENGTH: 6.5 INCHES WIDTH: 5 INCHES HEIGHT: 6 INCHES FILL HEIGHT: 7 INCHES CONVEYOR DIMENSIONS: WIDTH: 4 INCHES LENGTH: 10 FEET INFEED/DISCHARGE: 33 INCHES INDEXING SPACER FLIGHT: 3 INCHES DIMPLED STAINLESS STEEL BUCKETS STAINLESS STEEL CONSTRUCTION ELECTRICAL: 120 VOLTS, 3 PHASE, 60 HERTZ LAST APPLICATION: 6 AND 15 OUNCE SPECIALTY DOG TREAT CONTAINERS
|
🔒 Subscribe | |
|
|
LABEL-AIRE | 3115NV-1500 |
LABEL-AIRE 3115NV-1500 WIPE-ON LABELER. MINIMUM LABEL LENGTH: 0.5 INCHES. MAXIMUM WEB LENGTH: 16 INCHES. INFEED HEIGHT: 33.5 INCHES. CURRENT APERTURE: WIDTH: 6 INCHES, HEIGHT: 3.5 INCHES. MAXIMUM CONTAINER DIMENSIONS: 11 INCHES X 18 INCHES. DISPENSE SPEED: UP TO 2000 INCHES PER MINUTE. FILM ROLL DIAMETER: 18 INCHES. AIR REQUIREMENTS: 2 CFM @ 60 PSI. ELECTRICAL: 120 VOLTS, SINGLE PHASE, 60 HERTZ. FRAME: STAINLESS STEEL. OVERALL DIMENSIONS: LENGTH: 58 INCHES, WIDTH: 50 INCHES, HEIGHT: 7 FEET. MODEL: 3115NV.
|
🔒 Subscribe | |
|
|
TWO HEAD LINEAR SCALE WITH HOPPER: 304 STAINLESS STEEL. THE SCALE HAS 2 LINEAR VIBRATORY FEEDERS TO FEED THE WEIGHING BUCKETS. THE FRAME IS MADE FROM STAINLESS-STEEL TUBING AND CONTAINS LEVITATING FEET TO COMPENSATE FOR ANY FLOOR IMPERFECTIONS AND LEVELING.
|
🔒 Subscribe | |||
|
|
BAKERS PRIDE | BC011G |
BAKERS PRIDE BC011G 60,000 BTU GAS CONVECTION SINGLE DECK OVEN. THIS USED BAKERS PRIDE BC011G 60,000 BTU GAS CONVECTION SINGLE DECK OVEN IS A POWERFUL COMMERCIAL OVEN WITH A 60,000 BTU GAS HEATING CAPACITY, BUILT FOR HIGH-VOLUME BAKING AND ROASTING. IT FEATURES A CONVECTION FAN SYSTEM (TWO-SPEED) TO ENSURE EVEN HEAT DISTRIBUTION AND FASTER RECOVERY. THE OVEN INCLUDES REMOVABLE 11-POSITION RACK GUIDES AND FIVE ADJUSTABLE CHROME WIRE RACKS, OFFERING FLEXIBILITY IN LOAD CONFIGURATION. WITH STAINLESS STEEL EXTERIOR SURFACES, DOUBLE-PANE THERMAL GLASS DOORS, AND FRONT SERVICE ACCESS, ITS DESIGNED FOR DURABILITY, USABILITY, AND EASE OF MAINTENANCE. USED BAKERS PRIDE BC011G 60,000 BTU GAS CONVECTION SINGLE DECK OVEN WITH: TEMPERATURE RANGE: 150 FAHRENHEIT TO 550 FAHRENHEIT GAS TYPE: NATURAL 60 MINUTE TIMER 1/4 HP AIR-COOLED TWO-SPEED FAN MOTOR ELECTRONIC TEMPERATURE CONTROL COOL DOWN FAN MODE STAINLESS STEEL EXTERIOR INTERIOR CHAMBER DIMENSIONS: 29 INCHES WIDE X 20 INCHES TALL X 22 1/4 INCHES DEEP ELECTRICAL REQUIREMENTS FOR CONTROLS: 120 VOLTS MODEL: BCO11G
|
🔒 Subscribe | |
|
|
KONIG | ARTISAN SFI 350 II M |
2000 KONIG ARTISAN SFI 350 II M STAINLESS STEEL DOUGH SHEETER WITH: THROUGHPUT: UP TO 1,200 KILOGRAMS PER HOUR WITH FIRMER DOUGH UP TO 500 KILOGRAMS PER HOUR WITH SOFTER DOUGH PNEUMATIC AGITATED STAMPERS STAMPER DIMENSIONS: 3-INCH LENGTH, 3-INCH WIDTH, 1.5-INCH DEPTH TRO 300 STAINLESS STEEL HOPPER HOPPER CAPACITY: 300 KILOGRAMS (650 POUNDS) SIEMENS SIMATIC PANEL TOUCH SCREEN HMI APPROXIMATE OVERALL DIMENSIONS: 60 FEET LENGTH, 4 FEET WIDTH, 7 FEET HEIGHT STAINLESS STEEL CONSTRUCTION ELECTRICAL: 3 PHASE, 60 HZ, 208 VOLTS, 12 AMPS PREVIOUSLY USED IN BAKERY APPLICATION
|
🔒 Subscribe | |
|
|
CANGLAN TECHNOLOGY | BRH2 |
2000 CANGLAN TECHNOLOGY BRH2 4KW HIGH SHEAR MIXER WITH HYDRAULIC STAND UP TO 2800 RPM. PRODUCTION CAPACITY: 26 - 79 GALLONS PER HOUR, DEPENDING ON APPLICATION. SHAFT LENGTH: 29.5 INCHES. APPROXIMATE OVERALL DIMENSIONS (INCHES): LENGTH: 65 WIDTH: 40 HEIGHT: 72. STARK 8-TON AIR LONG RAM JACK. VARIABLE FREQUENCY CONTROL. MOUNTED ON A 1.5 TON CRANE WITH CASTERS. MOTOR: 4 KW. RPM: 2800. ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 8.2 AMPS. LAST APPLICATION: CREAMS AND LOTION MIXING. S/N: UNKNOWN
|
🔒 Subscribe | |
|
|
METTLER TOLEDO | X3301 |
2019 METTLER TOLEDO X3301 X-RAY INSPECTION SYSTEM WITH AIR BLAST REJECT. BELT SPEED: UP TO 60 METERS PER MINUTE. INFEED DIMENSIONS: BELT WIDTH: 17 INCHES, PRODUCT HEIGHT: UP TO 9 INCHES (240MM). AIR BLAST REJECT WITH CATCH BIN, TOUCHSCREEN CONTROLS WITH RECIPE MEMORY, 0.5 HORSEPOWER MOTOR. ELECTRICAL: VOLTS: 110, FREQUENCY: 50/60 HZ, PHASE 1. AIR REQUIREMENTS: 80 PSI. IP65 RATING, UL APPROVED, 304 STAINLESS STEEL CONSTRUCTION ON ADJUSTABLE HEIGHT LEGS. RIGHT TO LEFT OPERATION, 20 WATT GENERATOR, BERRYLIUM TUBE. INDUSTRY SEGMENTS: AGRICULTURE AND BULK FOODS, BAKERY AND CONFECTIONERY, BEER, WINE AND OTHER ALCOHOLIC BEVERAGES, BULK CHEMICALS, COSMETICS, DAIRY, FINE AND SPECIALTY CHEMICALS, FOOD ADDITIVES, MEAT & POULTRY & SEAFOOD, NUTRACEUTICALS, OILS AND FATS, PET FOOD AND ANIMAL FEED, PHARMA, READY MEALS, SNACK FOODS, SUGAR, STARCH AND YEAST, WATER AND OTHER NON-ALCOHOLIC BEVERAGES. S/N: X3301
|
🔒 Subscribe | |
|
|
LANTECH | S300XT |
200% PRE-STRETCH LANTECH S300XT SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER. PRODUCTION SPEED: UP TO 40 LOADS PER HOUR, APPLICATION DEPENDENT. ARM SPEED: 15 RPM. MINIMUM LOAD DIMENSIONS (INCHES): LENGTH: 30 WIDTH: 30 HEIGHT: 20. MAXIMUM LOAD DIAGONAL: 76 INCHES. MAXIMUM LOAD WEIGHT: FLOOR CAPACITY. MAXIMUM WRAP HEIGHT: 110 INCHES. FILM CAPACITY (INCHES): ROLL DIAMETER: 10 WEB WIDTH: 20. OVERALL DIMENSIONS (INCHES): LENGTH: 172 WIDTH: 157 HEIGHT: 121. FEATURES CUT AND CLAMP SYSTEM AND SAFETY GUARDING. ELECTRICAL: 120 V, 50/60 HZ, 7.6 A, SINGLE PHASE.
|
🔒 Subscribe | |
|
|
WEBER | ALPHA-HSM |
WEBER ALPHA HSM TOP AND BOTTOM PRINT AND APPLY PRESSURE SENSITIVE LABELER. VERSATILE AND EFFICIENT LABELING SOLUTION DESIGNED FOR HIGH-SPEED PACKAGING LINES. CAN SIMULTANEOUSLY APPLY LABELS TO BOTH THE TOP AND BOTTOM OF PRODUCTS, ENSURING CONSISTENT AND PRECISE PLACEMENT. EQUIPPED WITH ADVANCED PRINTING TECHNOLOGY, THE MACHINE OFFERS HIGH-QUALITY, CUSTOMIZABLE LABELS FOR A WIDE RANGE OF PRODUCT TYPES. WITH ITS RELIABLE PERFORMANCE AND USER-FRIENDLY INTERFACE, THE ALPHA HSM ENHANCES PRODUCTIVITY AND ENSURES ACCURATE LABELING FOR VARIOUS INDUSTRIAL APPLICATIONS. MAXIMUM DISPENSING SPEED: UP TO 262' PER MINUTE. MAXIMUM CONVEYOR SPEED: 492' PER MINUTE. MAXIMUM LABEL WIDTH: 5.3 INCH. APPLICATION ACCURACY: 0.01 INCH. MAXIMUM LABEL LENGTH: 78.7 INCH. MINIMUM LABEL SIZE: 0.39 INCH X 0.39 INCH. (2) TWO TOP LABEL APPLICATORS. (2) TWO BOTTOM LABEL APPLICATORS. (4) FOUR STACK LIGHTS. ELECTRICAL REQUIREMENTS: 240 VOLTS / 3 PHASE / 60 HERTZ. LAST RUNNING 3 INCH DIAMETER TOP AND BOTTOM LABELS AT 100 UNITS PER MINUTE.
|
🔒 Subscribe | |
|
|
HIGHLAND EQUIPMENT |
HIGHLAND EQUIPMENT STAINLESS STEEL MIXING KETTLE WITH CONTROL BOX - USED JACKETED STAINLESS STEEL TANK WITH: CAPACITY: ~172.2 GALLONS TANK DIAMETER: 37 INCHES MAX. PRESSURE: JACKET DESIGN: 55 PSIG @ 300F TEST PRESSURE: 94 PSIG HEATING METHOD: NATURAL GAS OVERALL DIMENSIONS: LENGTH: 40 WIDTH: 63 HEIGHT: 88 TWO TOP INLETS 1 PRODUCT INLET OUTSIDE DIAMETER: 4 INCHES INSIDE DIAMETER: 2 INCHES 1 CIP INLET OUTSIDE DIAMETER: 4 INCHES INSIDE DIAMTER: 3 INCHES DISCHARGE: CENTER BOTTOM FLANGED DIAMETER: 1.75 INCHES INSIDE DIAMETER: 1 INCH CIP COMPATIBLE MOUNTED ON PIPE STYLE BASE TOP-MOUNTED AGITATOR MOTOR DUAL-HINGED LID CASTER WHEELS INCLUDED AGITATION: DUAL SIDE SCRAPE AGITATOR MOTOR: 208-230/460 V, 60 HZ, THREE PHASE 1,750 RPM
|
🔒 Subscribe | ||
|
|
CTM | 360A |
CTM 360A HIGH SPEED TOP LABEL APPLICATOR - EQUIPPED WITH STATE-OF-THE-ART ELECTRONICS FEATURING A DUAL MICROPROCESSOR CONTROL. ONE 32-BIT PROCESSOR SUPERVISES THE APPLICATION PROGRAM WHILE THE DIGITAL SIGNAL PROCESSOR (USP) SUPERVISES THE MOTION LOOP RESULTING IN FASTER RESPONSE TIMES AND IMPROVED APPLICATION ACCURACY. REMOVAL AND REPAIR IS SIMPLIFIED WITH THE CONTROL SETUP TO ELIMINATE DOWNTIME AND COST. OUTPUT: UP TO 2,100 INCHES PER MINUTE CONVEYOR DIMENSIONS: 4 INCHES WIDE X 60 INCHES LONG TAMP HEIGHT: 37 INCHES AIR BLOW HEIGHT: 38 INCHES AIR BLOW DEPTH: 27 INCHES MAXIMUM OUTER CORE: 20 INCHES MAXIMUM INNER CORE: 3 INCHES AIR REQUIREMENTS: 60-90 PSI ELECTRICAL REQUIREMENTS: MODEL: CTM-360A
|
🔒 Subscribe | |
|
|
DIOSNA | HOPPER |
DIOSNA STAINLESS STEEL HOPPER WITH BOWL CLAW, LOAD CELLS, AND CONTROL PANEL. HOPPER CAPACITY: 15.7 CUBIC FEET. HOPPER DIMENSIONS: WIDTH: 42 INCHES, LENGTH: 44 INCHES, DEPTH: 40 INCHES. DISCHARGE HEIGHT: 45 INCHES. TOUCH SCREEN CONTROLS, VARIABLE FREQUENCY DRIVE, OPEN/CLOSE SLIDE GATE PUSH BUTTON CONTROL, LIGHT CURTAINS. ELECTRICAL REQUIREMENTS: 480 VOLTS, 60 HZ, 3 PHASE. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
SVEBA DAHLIN | V42LN-F |
SVEBA DAHLIN V42LN-F BAKERY RACK NATURAL GAS OVEN - HIGH-PERFORMANCE CONVECTION OVEN DESIGNED FOR COMMERCIAL BAKERIES. FEATURES ADVANCED HEAT CIRCULATION TECHNOLOGY FOR EVEN BAKING, ENSURING CONSISTENT RESULTS ACROSS MULTIPLE TRAYS. SPACIOUS INTERIOR ACCOMMODATES FULL-SIZED RACKS, OFFERING EXCELLENT CAPACITY FOR HIGH-VOLUME PRODUCTION. ENERGY-EFFICIENT OPERATION, REDUCING ENERGY CONSUMPTION WHILE MAINTAINING OPTIMAL BAKING CONDITIONS. NATURAL GAS POWER INPUT: 340,000 BTU PER HOUR. MAXIMUM TRAY SIZE (SINGLE RACK): 29.5" X 39.5". MAXIMUM TRAY SIZE (DOUBLE RACK): 18" X 30". HOOD CONNECTION DIAMETER: 10". GAS CONNECTION DIAMETER: 3/4" NPT. WATER CONNECTION: 3/8" NPT. DRAIN CONNECTION: 1/2". AUTOMATIC OVER PRESSURE DAMPER. ELECTRICAL: 120 VOLTS / 1 PHASE / 60 HERTZ. MODEL: V42LN
|
🔒 Subscribe | |
|
|
THIELE TECHNOLOGIES | T7300A |
THIELE TECHNOLOGIES T7300A 3 LANE DENESTER WITH: 3 LANE RECIPROCATING PLACER 7.5 INCH DIAMETER CAVITY MAGAZINE: 36 INCHES LONG ADJUSTABLE SPEED CONTROLS STAINLESS STEEL FRAME CASETERS ELECTRICAL: 120 VOLTS / 1 PHASE / 60 HERTZ / 2 AMPS AIR REQUIREMENTS: 80 PSI AT 2 CFM MODEL: T3700A
|
🔒 Subscribe | |
|
|
LOMA | IQ3 |
LOMA IQ3 STAINLESS STEEL METAL DETECTOR HEAD WITH FRAME - USED LOMA METAL DETECTOR WITH: APERTURE DIMENSIONS WITHOUT CONVEYOR: WIDTH: 13.75 INCHES HEIGHT: 7.75 INCHES PUSH BUTTON CONTROLS PRODUCTION FLOW: LEFT TO RIGHT OVERALL DIMENSIONS: LENGTH: 64 INCHES WIDTH: 34 INCHES HEIGHT: 40.5 INCHES THREADED LEVELER LEGS MOTOR: 0.5 HORSEPOWER ELECTRICAL: 1 PHASE, 60 HZ, 110 VOLTS PREVIOUSLY USED IN BAKERY APPLICATION MODEL: IQ3
|
🔒 Subscribe | |
|
|
MIDDLEBY MARSHALL | PS640G |
MIDDLEBY MARSHALL PS640G DOUBLE PIZZA OVENS - GAS-FIRED, DOUBLE-DECK CONVEYOR OVEN DESIGNED FOR CONTINUOUS PIZZA PRODUCTION. USES A CONVEYOR SYSTEM TO MOVE PRODUCT THROUGH A HEATED BAKING CHAMBER FOR CONSISTENT COOKING RESULTS. STAINLESS-STEEL CONSTRUCTION. CONVEYOR BELT DIMENSIONS: 76.5 INCHES LONG X 32 INCHES WIDE. COOKING CHAMBER LENGTH: 40.5 INCHES. BAKING TEMPERATURE RANGE: 300 TO 600 DEGREES FAHRENHEIT. FUEL TYPE: NATURAL GAS. ELECTRICAL REQUIREMENTS: 208-240 VOLTS. S/N: S008870109
|
🔒 Subscribe | |
|
|
LOMA | IQ3 |
11.75 X 13.75 INCH APERTURE METAL DETECTOR. OVERALL DIMENSIONS: 34.5 X 20 X 30 INCHES. TOUCHSCREEN HMI. ENVIRONMENT RATING: IP66. 304 STAINLESS STEEL CONSTRUCTION WITH POLISH FINISH. MAX CURRENT: 2 AMPS. ELECTRICALS: 120 VOLTS, 60 HZ.
|
🔒 Subscribe | |
|
|
PHOENIX | PRT 2150 |
PHOENIX PRT 2150 ROTARY STRETCH WRAPPER W FENCING & CONTROLS. FLOOR MOUNTED STRETCH WRAPPER KEEPS THE LOAD STATIONARY WHILE THE STRETCH FILM CARRIAGE ROTATES AROUND THE LOAD. DESIGNED FOR EXTREMELY HEAVY PALLET LOADS, TALL PALLET LOADS, VERY LIGHT PALLET LOADS, UNSTABLE PALLET LOADS, AND WASHDOWN ENVIRONMENTS. PRODUCTION: UP TO 45 LOADS PER HOUR. MAXIMUM LOAD WEIGHT: UNLIMITED. MAXIMUM LOAD SIZE: LENGTH: 56 INCHES, WIDTH: 56 INCHES. FRAME TYPE: CANTILEVERED MOUNT. (3) PROGRAMMABLE WRAP CYCLES. VARIABLE SPEED CONTROL. PUSH BUTTON CONTROLS. ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE. S/N:
|
🔒 Subscribe | |
|
|
CTM INTERNATIONAL | 360 SERIES |
CTM INTERNATIONAL 360 SERIES TAMPER STRIP LABELER. HIGH-SPEED LABELING MACHINE DESIGNED FOR APPLYING TAMPER-EVIDENT STRIPS TO A VARIETY OF PRODUCTS. FEATURES ADJUSTABLE SETTINGS FOR DIFFERENT PRODUCT SIZES, ENSURING VERSATILITY IN LABELING APPLICATIONS. BUILT FOR CONTINUOUS OPERATION, ENHANCING EFFICIENCY IN PRODUCTION ENVIRONMENTS. ROBUST CONSTRUCTION AND USER-FRIENDLY INTERFACE, PROVIDING RELIABLE PERFORMANCE FOR TAMPER-EVIDENT LABELING NEEDS. OUTPUT: UP TO 3,000 INCHES PER MINUTE DEPENDING ON LABEL SIZE. LABEL SIZES: MINIMUM: 3/4 INCH WIDE X 3/4 INCH LONG, MAXIMUM: 10 INCHES WIDE X 10 INCHES LONG. MAXIMUM LABEL ROLL SIZE: 12 INCH OUTER DIAMETER X 3 INCH INNER DIAMETER CORE. 6 INCH COLOR INTERFACE. AIR CONSUMPTION: UP TO 4 CFM AT 60-90 PSI. ELECTRICAL REQUIREMENTS: 120 VOLTS / 50/60 HERTZ / 1 PHASE.
|
🔒 Subscribe |
SAFELINE V48 RAD
PACKAGING EQUIPMENT
SAFELINE V48 RAD METAL DETECTOR WITH 17.5"W X 5.5"H APERTURE ON STAINLESS STEEL FRAME. FEATURES STOP...
Hammer Price:
🔒
ECONOSEAL E2000
PACKAGING EQUIPMENT
ECONOSEAL E2000 CARTONER WITH INFEED CONVEYOR - USED ECONOSEAL HORIZONTAL CARTONER WITH: SPEED: UP T...
Hammer Price:
🔒
HAMER FISCHBEIN PBC 6000
PACKAGING EQUIPMENT
HAMER FISCHBEIN PBC 6000 CONTINUOUS BAND BAG SEALER - USED FISCHBEIN BAG SEALER WITH: PRODUCTION THR...
Hammer Price:
🔒
ECONOCORP E2000
PACKAGING EQUIPMENT
2000 ECONOCORP E2000 CARTONER 8415 HAND LOAD CARTONER WITH: PRODUCTION OUTPUT RATE: UP TO 25 CARTONS...
Hammer Price:
🔒
ADMIX UNKNOWN
MISC
600 GALLON SINGLE WALL MIX TANK WITH ADMIX HIGH SHEAR MIXER. CAPACITY: 600 GALLONS. ADMIX HIGH SHEAR...
Hammer Price:
🔒
2020 METTLER TOLEDO SL1500
PACKAGING EQUIPMENT
2020 METTLER TOLEDO SL1500 METAL DETECTOR. CONVEYOR-MOUNTED INSPECTION SYSTEM DESIGNED TO RELIABLY I...
Hammer Price:
🔒
ECONOCORP E-2000
PACKAGING EQUIPMENT
ECONOCORP E-2000 AUTOMATIC HORIZONTAL CARTONER. INTERMITTENT MOTION. PRODUCTION OUTPUT RATE: UP TO 2...
Hammer Price:
🔒
ECONOSEAL E2000
PACKAGING EQUIPMENT
2000 ECONOSEAL E2000 AUTOMATIC STAINLESS STEEL HORIZONTAL CARTONER. SPEED: UP TO 25 CARTONS PER MINU...
Hammer Price:
🔒
HOBART V-1401
FOOD PROCESSING AND RESTAURANT EQUIPMENT
HOBART V-1401 140 QUART PLANETARY MIXER WITH PADDLE, BOWL, AND GUARD. 140 QUART BOWL CAPACITY, 4 SPE...
Hammer Price:
🔒
PACK LEADER PL-221
PACKAGING EQUIPMENT
PACK LEADER PL-221 TOP AND BOTTOM PRESSURE SENSITIVE LABELER. MAXIMUM DISPENSING AND CONVEYOR SPEED:...
Hammer Price:
🔒
HOBART V-1401
FOOD PROCESSING AND RESTAURANT EQUIPMENT
1970 HOBART V-1401 140 QUART PLANETARY MIXER WITH GUARD AND BOWL. BOWL CAPACITY: 140 QUARTS. SPEED S...
Hammer Price:
🔒
ABS SM-200T
FOOD PROCESSING AND RESTAURANT EQUIPMENT
ABS SM-200T 200 KILOGRAM SPIRAL MIXER - HEAVY-DUTY COMMERCIAL SPIRAL DOUGH MIXER BUILT FOR CONSISTEN...
Hammer Price:
🔒
2016 ULTRASOURCE ULTRA VAC 1000
PACKAGING EQUIPMENT
2016 ULTRASOURCE ULTRA VAC 1000 DUAL CHAMBER VACUUM SEALER. COMMERCIAL-GRADE PACKAGING MACHINE FOR H...
Hammer Price:
🔒
METTLER TOLEDO V4-RAD
TEST, MEASUREMENT & QUALITY EQUIPMENT
METTLER TOLEDO SAFELINE COMBINATION METAL DETECTOR CHECKWEIGHING SYSTEM - USED METTLER TOLEDO CHECK ...
Hammer Price:
🔒
LOCK INSPECTION SYSTEMS MET 30+
MISC
LOCK INSPECTION SYSTEMS MET 30+ STAINLESS STEEL METAL DETECTOR - USED LOCK METAL DETECTOR WITH: WORK...
Hammer Price:
🔒
B N PM-MINI-100
PACKAGING EQUIPMENT
2007 B N PM-MINI-100 PREMADE BAG HORIZONTAL FORM FILL AND SEAL. BAG DIMENSIONS: 4 TO 12 INCHES, 5 TO...
Hammer Price:
🔒
PACKAGING EQUIPMENT
PREMADE BAG HORIZONTAL FORM FILL AND SEAL WITH: BAG DIMENSIONS: WIDTH: 4 TO 8 INCH HEIGHT: 5 TO 12 I...
Hammer Price:
🔒
SOUTHBEND SLEB/20SC
FOOD PROCESSING AND RESTAURANT EQUIPMENT
SOUTHBEND SLEB/20SC STAINLESS STEEL ELECTRIC DOUBLE DECK OVEN - HEAT RANGE: 140 F TO 500 F. WIRE RAC...
Hammer Price:
🔒
THERMO SCIENTIFIC APEX 500
PACKAGING EQUIPMENT
THERMO SCIENTIFIC APEX 500 METAL DETECTOR WITH NILFISK VACUUM. APERTURE SIZES: 6 WIDTH X 4 HEIGHT IN...
Hammer Price:
🔒
MISC
5 CUBIC FOOT STAINLESS STEEL RIBBON BLENDER WITH DRIVE MOTOR. MIXER RPM: 46. CHAMBER DIMENSIONS: LEN...
Hammer Price:
🔒
RONDO
FOOD PROCESSING AND RESTAURANT EQUIPMENT
RONDO SEMI AUTOMATIC DOUGH ROUNDER. DIVIDES AND ROUNDS DOUGH INTO 36 EQUAL PARTS. INDIVIDUAL DOUGH W...
Hammer Price:
🔒
THERMO SCIENTIFIC APEX 500
PACKAGING EQUIPMENT
THERMO SCIENTIFIC APEX 500 METAL DETECTOR WITH NILFISK VACUUM. APERTURE SIZES: 6 WIDTH X 4 HEIGHT IN...
Hammer Price:
🔒
MOISTTECH CORP. 3000
MISC
MOISTTECH CORP. 3000 STAINLESS STEEL NEAR-INFRARED MOISTURE SENSOR. MOISTURE RANGES DEPENDING ON APP...
Hammer Price:
🔒
SAFELINE POWERPHASE
PACKAGING EQUIPMENT
SAFELINE POWERPHASE STAINLESS STEEL SMOOTH BELT CONVEYOR METAL DETECTOR. WORKING APERTURE: 19.5 INCH...
Hammer Price:
🔒
HOBART D300
FOOD PROCESSING AND RESTAURANT EQUIPMENT
USED HOBART D300 PLANETARY MIXER 30 QUARTS. THIS COMMERCIAL MIXER HAS A 30-QUART CAPACITY, MULTIPLE ...
Hammer Price:
🔒
MISC
STAINLESS STEEL RIBBON BLENDER WITH DRIVE MOTOR - USED RIBBON BLENDER WITH: CAPACITY: 5 FEET3 MIXER ...
Hammer Price:
🔒
MEPACO TB170
MISC
MEPACO TB170 00505 50 GALLON STAINLESS STEEL SINGLE SHAFT RIBBON BLENDER WITH: INTERIOR TANK DIMENSI...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
STAINLESS STEEL DOUGH CHUNKER W/ TAKEAWAY CONVEYANCE SYSTEM - USED DOUGH CHUNKER WITH: GRADED CAPACI...
Hammer Price:
🔒
CHAMPION 65S ETL
FOOD PROCESSING AND RESTAURANT EQUIPMENT
CHAMPION 65S ETL AUTOMATIC COOKIE DOUGH DEPOSITOR. DESIGNED FOR HIGH-SPEED, CONSISTENT PORTIONING OF...
Hammer Price:
🔒
URANIA 5000 P
PACKAGING EQUIPMENT
1999 URANIA 5000P VERTICAL CONTINUOUS BAND BAG SEALER - USED URANIA BAG SEALER WITH: MODEL: 5000 P S...
Hammer Price:
🔒
QUANTUM QTMC4000
FOOD PROCESSING AND RESTAURANT EQUIPMENT
QUANTUM QTMC4000 SAUCE DEPOSITOR. HIGH-PRECISION MACHINE DESIGNED FOR ACCURATE AND EFFICIENT SAUCE P...
Hammer Price:
🔒
OHLSON 8M2
PACKAGING EQUIPMENT
OHLSON 8M2 STAINLESS STEEL 8 HEAD LINEAR BUCKET SCALE WITH: MAX FILLING CAPACITY: 6 POUNDS WEIGHING ...
Hammer Price:
🔒
LABEL-AIRE 3115NV-1500
PACKAGING EQUIPMENT
LABEL-AIRE 3115NV-1500 WIPE-ON LABELER. MINIMUM LABEL LENGTH: 0.5 INCHES. MAXIMUM WEB LENGTH: 16 INC...
Hammer Price:
🔒
PACKAGING EQUIPMENT
TWO HEAD LINEAR SCALE WITH HOPPER: 304 STAINLESS STEEL. THE SCALE HAS 2 LINEAR VIBRATORY FEEDERS TO ...
Hammer Price:
🔒
BAKERS PRIDE BC011G
FOOD PROCESSING AND RESTAURANT EQUIPMENT
BAKERS PRIDE BC011G 60,000 BTU GAS CONVECTION SINGLE DECK OVEN. THIS USED BAKERS PRIDE BC011G 60,000...
Hammer Price:
🔒
KONIG ARTISAN SFI 350 II M
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2000 KONIG ARTISAN SFI 350 II M STAINLESS STEEL DOUGH SHEETER WITH: THROUGHPUT: UP TO 1,200 KILOGRAM...
Hammer Price:
🔒
CANGLAN TECHNOLOGY BRH2
MISC
2000 CANGLAN TECHNOLOGY BRH2 4KW HIGH SHEAR MIXER WITH HYDRAULIC STAND UP TO 2800 RPM. PRODUCTION CA...
Hammer Price:
🔒
METTLER TOLEDO X3301
PACKAGING EQUIPMENT
2019 METTLER TOLEDO X3301 X-RAY INSPECTION SYSTEM WITH AIR BLAST REJECT. BELT SPEED: UP TO 60 METERS...
Hammer Price:
🔒
LANTECH S300XT
PACKAGING EQUIPMENT
200% PRE-STRETCH LANTECH S300XT SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER. PRODUCTION SPEED: UP TO 4...
Hammer Price:
🔒
WEBER ALPHA-HSM
PACKAGING EQUIPMENT
WEBER ALPHA HSM TOP AND BOTTOM PRINT AND APPLY PRESSURE SENSITIVE LABELER. VERSATILE AND EFFICIENT L...
Hammer Price:
🔒
HIGHLAND EQUIPMENT
MISC
HIGHLAND EQUIPMENT STAINLESS STEEL MIXING KETTLE WITH CONTROL BOX - USED JACKETED STAINLESS STEEL TA...
Hammer Price:
🔒
CTM 360A
PACKAGING EQUIPMENT
CTM 360A HIGH SPEED TOP LABEL APPLICATOR - EQUIPPED WITH STATE-OF-THE-ART ELECTRONICS FEATURING A DU...
Hammer Price:
🔒
DIOSNA HOPPER
CHEMICAL PROCESSING EQUIPMENT
DIOSNA STAINLESS STEEL HOPPER WITH BOWL CLAW, LOAD CELLS, AND CONTROL PANEL. HOPPER CAPACITY: 15.7 C...
Hammer Price:
🔒
SVEBA DAHLIN V42LN-F
FOOD PROCESSING AND RESTAURANT EQUIPMENT
SVEBA DAHLIN V42LN-F BAKERY RACK NATURAL GAS OVEN - HIGH-PERFORMANCE CONVECTION OVEN DESIGNED FOR CO...
Hammer Price:
🔒
THIELE TECHNOLOGIES T7300A
PACKAGING EQUIPMENT
THIELE TECHNOLOGIES T7300A 3 LANE DENESTER WITH: 3 LANE RECIPROCATING PLACER 7.5 INCH DIAMETER CAVIT...
Hammer Price:
🔒
LOMA IQ3
MISC
LOMA IQ3 STAINLESS STEEL METAL DETECTOR HEAD WITH FRAME - USED LOMA METAL DETECTOR WITH: APERTURE DI...
Hammer Price:
🔒
MIDDLEBY MARSHALL PS640G
FOOD PROCESSING AND RESTAURANT EQUIPMENT
MIDDLEBY MARSHALL PS640G DOUBLE PIZZA OVENS - GAS-FIRED, DOUBLE-DECK CONVEYOR OVEN DESIGNED FOR CONT...
Hammer Price:
🔒
LOMA IQ3
PACKAGING EQUIPMENT
11.75 X 13.75 INCH APERTURE METAL DETECTOR. OVERALL DIMENSIONS: 34.5 X 20 X 30 INCHES. TOUCHSCREEN H...
Hammer Price:
🔒
PHOENIX PRT 2150
PACKAGING EQUIPMENT
PHOENIX PRT 2150 ROTARY STRETCH WRAPPER W FENCING & CONTROLS. FLOOR MOUNTED STRETCH WRAPPER KEEPS TH...
Hammer Price:
🔒
CTM INTERNATIONAL 360 SERIES
PACKAGING EQUIPMENT
CTM INTERNATIONAL 360 SERIES TAMPER STRIP LABELER. HIGH-SPEED LABELING MACHINE DESIGNED FOR APPLYING...
Hammer Price:
🔒