Machining Services Inc Closing Facility All Assets From CNC Machine Shop
Category: CNC MACHINE CENTERS
Total Lots:
451
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2013 | HURCO | VMX6030I |
2013 HURCO VMX6030I CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 60" X 30" X 24" TRAVEL, 66.14" X 30" TABLE, 12,000 RPM SPINDLE, 24 HP SPINDLE MOTOR, 1181 RAPID IN X AND Y, 787 RAPID IN Z, 30 POSITION TOOL HOLDER, CAT40 SPINDLE TAPER, CHIP AUGER, 13463 MACHINE ON HOURS. EQUIPPED WITH THE FOLLOWING SOFTWARE OPTIONS; ADVANCED VERIFICATION GRAPHICS, NC PRODUCTIVITY PACKAGE, ULTIPOCKETS, INSERTS POCKETS, RIGID TAPPING, HELICAL RAMP, SLECTSURFACE FINISH QUALITY, TOOL AND MATERIAL LIBRARY, ULTIMOTION, TOOL CHANGE OPTIMIZATION.
|
🔒 Subscribe |
|
|
2016 | HURCO | TM6I |
2016 HURCO TM6I CNC LATHE. EQUIPPED WITH 15.94" SWING OVER BED, 15.8" DISTANCE BETWEEN CENTERS, 17.5 HP SPINDLE, 6,000 MAX RPM, 12 TOOL POSITIONS, 6" 3 JAW CHUCK, PARTS CATCHER, TAIL STOCK, 3478 MACHINE ON HOURS, 1047 SPINDLE ON HOURS.
|
🔒 Subscribe |
|
|
2008 | ERMAK | HAP 8' X 88 TON CNC PRESS BRAKE |
2008 ERMAK HAP 8' X 88 TON CNC PRESS BRAKE. 88 TON CAPACITY, 3.94 IPS APPROACH SPEED, 13,230 LBS, 76.7" X 147.6" X 108.3" H. EQUIPPED WITH CYBELEC CONTROLLER, 2 SHEET SUPPORTS, PALM BUTTON AND FOOT CONTROL, SINGLE AXIS CNC BACKGAUGE, REAR LIGHT CURTAINS.
|
🔒 Subscribe |
|
|
2006 | HURCO | VM2 |
2006 HURCO VM2 CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 46" X 20" TABLE, 8,000 RPM SPINDLE, CT 40 SPINDLE TAPER, 20 HP SPINDLE MOTOR, 20 ATC. 22171 MACHINE ON HOURS.
|
🔒 Subscribe |
|
|
1999 | HAAS | VF-4 |
1999 HAAS VF-4 CNC VERTICAL MACHINING CENTER W/ 4TH AXIS. EQUIPPED WITH 52" X 18" TABLE, 20 HP SPINDLE, 7,500 RPM SPINDLE, CAT40 SPINDLE TAPER, CHIP AUGER, 7242 POWER ON TIME, 1177 FEED CUTTING TIME, MANUALS, 4TH AXIS, 131" X 92" X 101" H, 13,300 LBS TOTAL WEIGHT.
|
🔒 Subscribe |
|
|
2005 | HURCO | VM2 |
2005 HURCO VM2 CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 46" X 20" TABLE, 8,000 RPM SPINDLE, CT 40 SPINDLE TAPER, 20 HP SPINDLE MOTOR, 20 ATC. 21373 MACHINE ON HOURS.
|
🔒 Subscribe |
|
|
2006 | COSEN | C-250NC |
2006 COSEN C-250NC 9" X 10" AUTOMATIC BANDSAW. EQUIPPED W/ 2 HP BLADE MOTOR, 1" WIDE SAW BLADE, OUTFEED ROLLER CONVEYOR.
|
🔒 Subscribe |
|
|
YALE | FLC050R |
YALE FLC050R 5,000 LB FORKLIFT. EQUIPPED WITH 60" FORKS, 3 STAGE MAST, CUSHION TIRES, 188" LIFT HEIGHT, 5,000 LB CAPACITY.
|
🔒 Subscribe | |
|
|
2013 | ATLAS COPCO | GX11FF |
2013 ATLAS COPCO GX11FF AIR COMPRESSOR W/ SCHULZ ADS 100 AIR DRYER. EQUIPPED WITH 15 HP MOTOR, 60 CFMS, 230VS, 23,486 HOURS.
|
🔒 Subscribe |
|
|
1996 | AMADA | LC-3015&II LASMAC |
1996 AMADA LC-3015&II LASMAC 2KW CO2 LASER. EQUIPPED WITH 5' X 10' TABLE, FANUC SERIES 16-L CONTROLLER, DUST COLLECTOR, C2000B LASER RESONATOR AND KOOLANT KOOLERS HCV 7500PR-NF CHILLER.
|
🔒 Subscribe |
|
|
LINCOLN ELECTRIC |
LINCOLN ELECTRIC TOOL TOOL TROLLEY WITH CAT40 TOOLING
|
🔒 Subscribe | ||
|
|
KINGSTON | HQ1440 |
KINGSTON HQ1440 14" X 40" ENGINE LATHE. EQUIPPED W/ STEADY RESTS, QUICK CHANGE TOOL CHANGER.
|
🔒 Subscribe | |
|
|
BRIDGEPORT | SERIES 1 |
BRIDGEPORT SERIES 1 9" X 48" MILLING MACHINE. EQUIPPED W/ 2 HP SPINDLE, BRIDGEPORT X AXIS POWER FEED, ACCU-RITE DIGITAL READOUT, AND BRIDGEPORT HORIZONTAL SPINDLE HEAD ATTACHMENT.
|
🔒 Subscribe | |
|
|
BRIDGEPORT | SERIES 1 |
BRIDGEPORT SERIES 1 9" X 48" MILLING MACHINE. EQUIPPED W/ 2 HP SPINDLE, BRIDGEPORT X AXIS POWER FEED, DIGITAL READOUT.
|
🔒 Subscribe | |
|
|
PRESS BRAKE TOOLING RACK W/ ASSORTMENT OF TOOLING.
|
🔒 Subscribe | |||
|
|
SEIKI | XL 3VX 10" X 50" |
SEIKI XL 3VX 10" X 50" VERTICAL MILLING MACHINE. EQUIPPED X AXIS POWER FEED, ACCU-RITE III DRO, KURT POWER LOCK AUTOMATIC DRAW BAR ATTACHMENT, MITUTOYA Z AXIS DRO.
|
🔒 Subscribe | |
|
|
ALL METAL CONTENTS ON PALLET RACKING AND (2) SECTION OF 43" X 110" X 16' HIGH PALLET RACKING.
|
🔒 Subscribe | |||
|
|
HYPTHERM | POWERMAX 65 |
HYPTHERM POWERMAX 65 PLASMA CUTTER W/ STEEL STAND. 3/4" CUT CAPACITY AT 20 IPM, 1" CUT CAPACITY AT 10 IPM, 1-1/4" HAND CUTTING CAPACITY AT 5 IPM, 5/8" PIERCE CAPACITY.
|
🔒 Subscribe | |
|
|
ROLL-IN VERTICAL AUTO FEED BANDSAW.
|
🔒 Subscribe | |||
|
|
POWERMATIC | 87 20 |
POWERMATIC 87 20" VERTICAL BANDSAW W/ BLADE WELDER.
|
🔒 Subscribe | |
|
|
KENNEDY | 13 DRAWER TOOL CABINET WITH MINI CABINET ON TOP |
KENNEDY 13 DRAWER TOOL CABINET WITH MINI CABINET ON TOP
|
🔒 Subscribe | |
|
|
HITACHI SEIKI | HITEC-TURN20S III |
HITACHI SEIKI HITEC-TURN20S III CNC LATHE. SPINDLE DRIVE NEEDS TO BE REPLACED.
|
🔒 Subscribe | |
|
|
PHOENIX | 60 HP |
PHOENIX 60 HP PHASE CONVERTER.
|
🔒 Subscribe | |
|
|
ASSORTMENT OF STEEL BAR STOCK AND STOCK CUT FROM PLATE.
|
🔒 Subscribe | |||
|
|
SEIKI | XL 3VX 10" X 50" |
SEIKI XL 3VX 10" X 50" VERTICAL MILLING MACHINE. EQUIPPED X AXIS POWER FEED, ACCU-RITE III DRO, KURT POWER LOCK AUTOMATIC DRAW BAR ATTACHMENT, MITUTOYA Z AXIS DRO. HEAD NEEDS TO BE REBUILT.
|
🔒 Subscribe | |
|
|
BELT DISC SANDING MACHINE. EQUIPPED WITH 6" BELT, 12" DISC AND 1 HP MOTOR.
|
🔒 Subscribe | |||
|
|
MILLER | SYNCROWAVE 250DX |
MILLER SYNCROWAVE 250DX WELDER W/ FOOT PEDAL.
|
🔒 Subscribe | |
|
|
KENNEDY | 7 DRAWER TOOL CABINET WITH 2 DRAW CABINET ON TOP |
KENNEDY 7 DRAWER TOOL CABINET WITH 2 DRAW CABINET ON TOP
|
🔒 Subscribe | |
|
|
TRINCO | 48 / BP |
TRINCO 48 / BP SAND BLASTING CABINET W/ TRINCO BP2 VACUUM.
|
🔒 Subscribe | |
|
|
MILLER | COOLMATE 3 |
MILLER COOLMATE 3 COOLER
|
🔒 Subscribe | |
|
|
PALLET OF ROUND STOCK MATERIAL.
|
🔒 Subscribe | |||
|
|
KENNEDY | 7 DRAWER TOOL CABINET |
KENNEDY 7 DRAWER TOOL CABINET
|
🔒 Subscribe | |
|
|
METAL RACK AND ALL MATERIAL ON RACKING.
|
🔒 Subscribe | |||
|
|
TOOLMEX | RWS-4002 |
TOOLMEX RWS-4002 4" DOUBLE STATION MACHINE VISE
|
🔒 Subscribe | |
|
|
ASSORTMENT OF METAL MATERIAL AGAINST THE WALL.
|
🔒 Subscribe | |||
|
|
4' X 8' WELDING TABLE
|
🔒 Subscribe | |||
|
|
FEDERAL | POCKET SURF TOOL |
FEDERAL POCKET SURF TOOL
|
🔒 Subscribe | |
|
|
TRIANGLE ENGINEERING |
TRIANGLE ENGINEERING 1/2 HP SHOP FAN
|
🔒 Subscribe | ||
|
|
2 SECTION OF 42" X 142" PALLET RACKING - 10' HIGH. DOES NOT INCLUDE CONTENTS ON OUR BELOW PALLET RACKING
|
🔒 Subscribe | |||
|
|
KENNEDY | WW5405 |
KENNEDY WW5405 5 DRAWER TOOL CABINET
|
🔒 Subscribe | |
|
|
KURT | D675 |
KURT D675 6" MACHINE VISE
|
🔒 Subscribe | |
|
|
KURT | D675 |
KURT D675 6" MACHINE VISE
|
🔒 Subscribe | |
|
|
MILLER | CP-250TS |
MILLER CP-250TS WELDER W/ MILLER WIRE FEEDER. DOESN'T INCLUDE GAS TANK.
|
🔒 Subscribe | |
|
|
WILTON | 3816 |
WILTON 3816 DRILL PRESS
|
🔒 Subscribe | |
|
|
MILLER | 330ST AIRCRAFTER |
MILLER 330ST AIRCRAFTER WELDER W/ FOOT PEDAL.
|
🔒 Subscribe | |
|
|
SUNNEX | 20 TON HYDRAULIC H FRAME PRESS |
SUNNEX 20 TON HYDRAULIC H FRAME PRESS
|
🔒 Subscribe | |
|
|
TOOLMEX | RWS-4002 |
TOOLMEX RWS-4002 4" DOUBLE STATION MACHINE VISE
|
🔒 Subscribe | |
|
|
KENNEDY | WW5405 |
KENNEDY WW5405 5 DRAWER TOOL CABINET. INCLUDES T SLOT CLAMPING KIT. DOES NOT INCLUDE CONTENTS ON TOP OF CABINET.
|
🔒 Subscribe | |
|
|
6" ROTARY TABLE
|
🔒 Subscribe | |||
|
|
ASSORTMENT OF LATHE TOOLS.
|
🔒 Subscribe |
2013 HURCO VMX6030I
2013 HURCO VMX6030I CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 60" X 30" X 24" TRAVEL, 66.14" X 30...
2016 HURCO TM6I
2016 HURCO TM6I CNC LATHE. EQUIPPED WITH 15.94" SWING OVER BED, 15.8" DISTANCE BETWEEN CENTERS, 17.5...
2008 ERMAK HAP 8' X 88 TON CNC PRESS BRAKE
2008 ERMAK HAP 8' X 88 TON CNC PRESS BRAKE. 88 TON CAPACITY, 3.94 IPS APPROACH SPEED, 13,230 LBS, 76...
2006 HURCO VM2
2006 HURCO VM2 CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 46" X 20" TABLE, 8,000 RPM SPINDLE, CT 4...
1999 HAAS VF-4
1999 HAAS VF-4 CNC VERTICAL MACHINING CENTER W/ 4TH AXIS. EQUIPPED WITH 52" X 18" TABLE, 20 HP SPIND...
2005 HURCO VM2
2005 HURCO VM2 CNC VERTICAL MACHINING CENTER. EQUIPPED WITH 46" X 20" TABLE, 8,000 RPM SPINDLE, CT 4...
2006 COSEN C-250NC
2006 COSEN C-250NC 9" X 10" AUTOMATIC BANDSAW. EQUIPPED W/ 2 HP BLADE MOTOR, 1" WIDE SAW BLADE, OUTF...
YALE FLC050R
YALE FLC050R 5,000 LB FORKLIFT. EQUIPPED WITH 60" FORKS, 3 STAGE MAST, CUSHION TIRES, 188" LIFT HEIG...
2013 ATLAS COPCO GX11FF
2013 ATLAS COPCO GX11FF AIR COMPRESSOR W/ SCHULZ ADS 100 AIR DRYER. EQUIPPED WITH 15 HP MOTOR, 60 CF...
1996 AMADA LC-3015&II LASMAC
1996 AMADA LC-3015&II LASMAC 2KW CO2 LASER. EQUIPPED WITH 5' X 10' TABLE, FANUC SERIES 16-L CONTROLL...
LINCOLN ELECTRIC
LINCOLN ELECTRIC TOOL TOOL TROLLEY WITH CAT40 TOOLING...
KINGSTON HQ1440
KINGSTON HQ1440 14" X 40" ENGINE LATHE. EQUIPPED W/ STEADY RESTS, QUICK CHANGE TOOL CHANGER....
BRIDGEPORT SERIES 1
BRIDGEPORT SERIES 1 9" X 48" MILLING MACHINE. EQUIPPED W/ 2 HP SPINDLE, BRIDGEPORT X AXIS POWER FEED...
BRIDGEPORT SERIES 1
BRIDGEPORT SERIES 1 9" X 48" MILLING MACHINE. EQUIPPED W/ 2 HP SPINDLE, BRIDGEPORT X AXIS POWER FEED...
PRESS BRAKE TOOLING RACK W/ ASSORTMENT OF TOOLING.
SEIKI XL 3VX 10" X 50"
SEIKI XL 3VX 10" X 50" VERTICAL MILLING MACHINE. EQUIPPED X AXIS POWER FEED, ACCU-RITE III DRO, KURT...
ALL METAL CONTENTS ON PALLET RACKING AND (2) SECTION OF 43" X 110" X 16' HIGH PALLET RACKING.
HYPTHERM POWERMAX 65
HYPTHERM POWERMAX 65 PLASMA CUTTER W/ STEEL STAND. 3/4" CUT CAPACITY AT 20 IPM, 1" CUT CAPACITY AT 1...
ROLL-IN VERTICAL AUTO FEED BANDSAW.
POWERMATIC 87 20
POWERMATIC 87 20" VERTICAL BANDSAW W/ BLADE WELDER....
KENNEDY 13 DRAWER TOOL CABINET WITH MINI CABINET ON TOP
KENNEDY 13 DRAWER TOOL CABINET WITH MINI CABINET ON TOP...
HITACHI SEIKI HITEC-TURN20S III
HITACHI SEIKI HITEC-TURN20S III CNC LATHE. SPINDLE DRIVE NEEDS TO BE REPLACED....
PHOENIX 60 HP
PHOENIX 60 HP PHASE CONVERTER....
ASSORTMENT OF STEEL BAR STOCK AND STOCK CUT FROM PLATE.
SEIKI XL 3VX 10" X 50"
SEIKI XL 3VX 10" X 50" VERTICAL MILLING MACHINE. EQUIPPED X AXIS POWER FEED, ACCU-RITE III DRO, KURT...
BELT DISC SANDING MACHINE. EQUIPPED WITH 6" BELT, 12" DISC AND 1 HP MOTOR.
MILLER SYNCROWAVE 250DX
MILLER SYNCROWAVE 250DX WELDER W/ FOOT PEDAL....
KENNEDY 7 DRAWER TOOL CABINET WITH 2 DRAW CABINET ON TOP
KENNEDY 7 DRAWER TOOL CABINET WITH 2 DRAW CABINET ON TOP...
TRINCO 48 / BP
TRINCO 48 / BP SAND BLASTING CABINET W/ TRINCO BP2 VACUUM....
MILLER COOLMATE 3
MILLER COOLMATE 3 COOLER...
PALLET OF ROUND STOCK MATERIAL.
KENNEDY 7 DRAWER TOOL CABINET
KENNEDY 7 DRAWER TOOL CABINET...
METAL RACK AND ALL MATERIAL ON RACKING.
TOOLMEX RWS-4002
TOOLMEX RWS-4002 4" DOUBLE STATION MACHINE VISE...
ASSORTMENT OF METAL MATERIAL AGAINST THE WALL.
4' X 8' WELDING TABLE
FEDERAL POCKET SURF TOOL
FEDERAL POCKET SURF TOOL...
TRIANGLE ENGINEERING
TRIANGLE ENGINEERING 1/2 HP SHOP FAN...
2 SECTION OF 42" X 142" PALLET RACKING - 10' HIGH. DOES NOT INCLUDE CONTENTS ON OUR BELOW PALLET RAC
KENNEDY WW5405
KENNEDY WW5405 5 DRAWER TOOL CABINET...
KURT D675
KURT D675 6" MACHINE VISE...
KURT D675
KURT D675 6" MACHINE VISE...
MILLER CP-250TS
MILLER CP-250TS WELDER W/ MILLER WIRE FEEDER. DOESN'T INCLUDE GAS TANK....
WILTON 3816
WILTON 3816 DRILL PRESS...
MILLER 330ST AIRCRAFTER
MILLER 330ST AIRCRAFTER WELDER W/ FOOT PEDAL....
SUNNEX 20 TON HYDRAULIC H FRAME PRESS
SUNNEX 20 TON HYDRAULIC H FRAME PRESS...
TOOLMEX RWS-4002
TOOLMEX RWS-4002 4" DOUBLE STATION MACHINE VISE...
KENNEDY WW5405
KENNEDY WW5405 5 DRAWER TOOL CABINET. INCLUDES T SLOT CLAMPING KIT. DOES NOT INCLUDE CONTENTS ON TOP...
6" ROTARY TABLE
ASSORTMENT OF LATHE TOOLS.