Fabrication Equipment Moving Sale from Maryland Facility Closure

2 STACKED AND WELDED WELDSALE 8 LEG ACORN WELDING TABLES 10'L X 5'W X 68-1/2"H (TOGETHER)

2 STACKED AND WELDED WELDSALE 8 LEG ACORN WELDING TABLES 10'L X 5'W X 68-1/2"H (TOGETHER)

NELWELD 6000 STUD WELDER/ BENCH WELDER SYSTEM 300A / 32V - 2500A / 44V U= <97V X: 10%,60%,100% I2: 2500A, 1020A, 790A U2: 44V, 44V, 44V U1= N208V, I1MAX= 556A, I1EFF=138A U1= N230V, I1MAX= 503A, I1EFF=125A U1= N460V, I1MAX= 257A, I1EFF=68A U1= N575V, I1MAX= 207A, I1EFF=56A 3~60HZ IP23 MIN., MAX., BASE WELD DIAMETER: 3/16 INCH, 1 INCH OPERATING TEMP. RANGE: 32OF - 104OF WELD CURRENT (MIN, MAX): 300A, 2500A WELD TIME (MIN, MAX): 0.020, 1.500 WEIGHT: 1050 LBS DIMENSIONS: 28 INCH W X 35-1/5 INCH D X 34 INCH H WITH LEGS, 39.6 INCH H WITH CASTORS S/N: 10032449

WELDALE ACORN WELDING TABLES 10'L X 5'W X 69"H (TOGETHER)

2 STACKED AND WELDED WELDSALE 8 LEG ACORN WELDING TABLES 10'L X 5'W X 68-5/8"H (TOGETHER)

2005 HAAS GR-510 GANTRY MILL & ROUTER SN: 42363 XYZ TRAVELS: 121" X 61" X 11" 15HP, 11.2KW, VECTOR DRIVE 10,000 RPM SPINDLE 5' X 10' FIXED TABLE RAPIDS TO 2100 IPM 10-POCKET AUTOMATIC TOOL CHANGER MACHINE HEIGHT (MAX.): 99.25" MACHINE WIDTH (MAX.): 130.5" MACHINE DEPTH (MAX. OPERATING LENGTH): 228.75" BETWEEN COLUMNS (MAX.): 62" MACHINE WEIGHT: 15,000LB AIR REQUIRED: 4 SCFM AT 100 PSI POWER REQUIRED: 14 KVA VOLTAGE/PHASE: 200-250 VAC, 3PH, 50-60HZ TABLE WIDTH: 59" LENGTH: 122" SPINDLE NOSE TO TABLE: 2.5" - 13.5" BETWEEN COLUMNS (MAX.): 62" SPINDLE TAPER SIZE: CT40 MAX. SPEED: 10,000 RPM DRIVE SYSTEM: DIRECT SPEED, BELT DRIVE SPINDLE MOTOR MAX. RATING: 15HP, 11.2KW SPINDEL MAX. TORQUE: 17 FTLB@4,600 RPM INSTALLED SYTEM AND EXTRAS: 5K-GR, 5,000 RPM, 40 TAPER, 20HP, DUAL DRIVE SPINDLE CS-GR, COOLANT SYSTEM FOR GANTRY ROUTER PCOOL-GR, PROGRAMMABLE COOLANT NOZZLE SYSTEM RTAP-3, RIGID TAPPING FOR GANTRY ROUTERS FD3, 3.5" FLOPPY DISC DRIVE RJH, REMOTE JOG HANDLE ATB, ACCESSORY TOOLING BLOCK ST-GR, STEEL TABLE FOR GR-510 VQC-V, VISUAL QUICK CODE PROGRAMMING SYSTEM SHIPPING DIMENSIONS: 104"-215"L 96-13/32"-138"W 121"H MACHINE WEIGHT: ~15,000 LBS SHIPPING WEIGHT: 20,000 LBS

2016 METRAIL MET-TRACK 2000 LB BRIDGE CRANE WITH (2) 1TON HOISTS ON (2) 2,000LB BRIDGE RAILS. TOTAL LENGTH: 120' ON 4X 30' SECTIONAL RUNWAY RAILS. 20' BRIDGE RAILS. 10X 19', 7" X 7" HEADER COLUMN BEAMS. 5X 23-1/2', 7" X 7" HEADER BEAMS. HOISTS: 2022 DAYTON 1 TON. LIFTING CAPACITY: 1 TON (2,000LB). CITY CLASS: H3 - STANDARD DUTY. OPERATING VOLTAGE: 115 VAC. MOTOR: 1HP. LIFT SPEED: 16 FPM. MAX. LIFTING LENGTH: 20'. BRAKE TYPE: LOAD.

2003 HAAS TM-1 TOOL ROOM MILL TABLE SIZE: 48" X 10.5" X AXIS TRAVEL: 30" Y AXIS TRAVEL: 12" Z AXIS TRAVEL: 16" SPINDLE SPEED: 0 - 4,000 RPM SPINDLE MOTOR: 7.5HP SPINDLE TAPER: CAT#40 AUTOMATIC TOOL CHANGER: 10 TOOLS DIMENSIONS: 68" X 104" X 98" WEIGHT: 5,200 LBS S/N: 30566

WELDSALE ACORN WELDING TABLE 8'L X 5'W X 36-1/4"H WITH 2 EXTENSION ENDS BOLTED ON: 1) 5'L X 18"W 2) 4'2"L X 12"W

2000LB BRIDGE CRANE WITH 2X COFFING JLC 1TON HOISTS ON 2X 2,000LB BRIDGE RAILS. TOTAL LENGTH: 90' ON 3X 30' SECTIONAL RUNWAY RAILS. 20' BRIDGE RAILS. 8X 19' HEADER COLUMN BEAMS. 4X 23' HEADER BEAMS. HOIST SPECS (MIN. TO MAX. VALUES AND MODEL ESTIMATES DEPENDING ON EXACT MODEL ON RAILS): MODEL: JLC2016 SPEED: 16/5.33 FPM HP: 1/0.33 VOLTS: 460//380 - 415V AMPS: 2/1.3 // 1.9/1.2, 2.25/1.55, 2/1.3 RPM: 1425/1440, 1725/575 FRAME: 56Z, 56YZ HERTZ: 60HZ, 60/50HZ PHASE: 3PH SER. F.: 1, CODE: N, DES: D, CLASS: F RATING: 40OC AMBIENT / AMBIENT - SPECIAL CC USABLE AT 208V

ACORN IRON AND SUPPLY CO. WELDING TABLE 5'L TABLE SURFACE, 5'-2"L TABLE BASE 5'L TABLE SURFACE X 5'2"W TABLE BASE 30-3/4"H

2019 LINCOLN ELECTRIC 350 POWER MIG/TIG/STICK WELDER MULTI WELDER: MIG, PULSE-ON-PULSE, PULSED MIG, FLUX-CORED, STICK AND TIG OUTPUT RANGE: 5-350A DC RATED OUTPUT (AMPS/VOLTAGE/DUTY CYCLE): 300A/32V/60% (40% DUTY CYCLE ON 208V) INPUT POWER: 208/230/460/575/1/60 (SINGLE PHASE) INPUT CURRENT: 76/64/37/29A WIRE FEED SPEED: 50-700 IPM WIRE DIAMETER RANGE: 0.023-0.045" (SOLID), 0.035-0.045" (CORED) MAX. OCV: 67V NET WEIGHT: 255-284 LBS DEPENDING ON OPTIONS DIMENSIONS: 18.9"W X 38.8"D X 31.8"H S/N: U1190701959

2018 MILLER XMT 350 CC/CV AUTO-LINE WELDER (ARC, MIG, TIG, STICK) WITH 2018 MILLER 22A WIRE FEEDER UNIT. WELDER: S/N: MJ104213U. 3 PHASE INPUT AND SINGLE PHASE INPUT: RATED OUTPUT: 350A AT 34 VDC, 60% DUTY CYCLE (275A @100%) AMPERAGE RANGE (CC): 5-425A VOLTAGE RANGE (CV): 10-38V MAX. OPEN CIRCUIT VOLTAGE: 75 VDC INPUT VOLTAGES: 208, 230, 400, 460, 575 VAC (1 OR 3 PH). WIRE FEEDER: S/N: MJ130055V. VOLTS: 24V AMPS: 7.0A HERTZ: 50/60HZ

2016 LINCOLN ELECTRIC 350 POWER MIG MULTI WELDER: MIG, PULSE-ON-PULSE, PULSED MIG, FLUX-CORED, STICK AND TIG. OUTPUT RANGE: 5-350A DC. RATED OUTPUT (AMPS/VOLTAGE/DUTY CYCLE): 300A/32V/60% (40% DUTY CYCLE ON 208V). INPUT POWER: 208/230/460/575/1/60 (SINGLE PHASE). INPUT CURRENT: 76/64/37/29A. WIRE FEED SPEED: 50-700 IPM. WIRE DIAMETER RANGE: 0.023-0.045 INCH (SOLID), 0.035-0.045 INCH (CORED). MAX. OCV: 67V. NET WEIGHT: 255-284 LBS DEPENDING ON OPTIONS. DIMENSIONS: 18.9"W X 38.8"D X 31.8"H. S/N: U1160603054

2016 LINCOLN ELECTRIC 350 POWER MIG MIG, PULSE-ON-PULSE, PULSED MIG, FLUX-CORED, STICK AND TIG WELDER. OUTPUT RANGE: 5-350A DC. RATED OUTPUT: 300A/32V/60% (40% DUTY CYCLE ON 208V). INPUT POWER: 208/230/460/575/1/60 (SINGLE PHASE). INPUT CURRENT: 76/64/37/29A. WIRE FEED SPEED: 50-700 IPM. WIRE DIAMETER RANGE: 0.023-0.045" (SOLID), 0.035-0.045" (CORED). MAX. OCV: 67V. NET WEIGHT: 255-284 LBS DEPENDING ON OPTIONS. DIMENSIONS: 18.9"W X 38.8"D X 31.8"H. S/N: U1160600016

2019 LINCOLN ELECTRIC 350 POWER MIG/TIG/STICK WELDER MULTI WELDER: MIG, PULSE-ON-PULSE, PULSED MIG, FLUX-CORED, STICK AND TIG OUTPUT RANGE: 5-350A DC RATED OUTPUT (AMPS/VOLTAGE/DUTY CYCLE): 300A/32V/60% (40% DUTY CYCLE ON 208V) INPUT POWER: 208/230/460/575/1/60 (SINGLE PHASE) INPUT CURRENT: 76/64/37/29A WIRE FEED SPEED: 50-700 IPM WIRE DIAMETER RANGE: 0.023-0.045" (SOLID), 0.035-0.045" (CORED) MAX. OCV: 67V NET WEIGHT: 255-284 LBS DEPENDING ON OPTIONS DIMENSIONS: 18.9"W X 38.8"D X 31.8"H S/N: U1190701965

2016 MILLER XMT 350 CC/CV AUTO-LINE WELDER (MIG, TIG, STICK) WITH 2002 MILLER S-22P12 WIRE FEED UNIT. WELDER: 3 PHASE INPUT AND SINGLE PHASE INPUT: RATED OUTPUT: 350A AT 34 VDC, 60% DUTY CYCLE (275A @100%) AMPERAGE RANGE (CC): 5-425A VOLTAGE RANGE (CV): 10-38V MAX. OPEN CIRCUIT VOLTAGE: 75 VDC INPUT VOLTAGES: 208, 230, 400, 460, 575 VAC (1 OR 3 PH) S/N: MG454189U. WIRE FEEDER: VOLTS: 24V AMPS: 7.0A HERTZ: 50/60HZ WELD CIRCUIT RATING: MAX. VOLTS: 100V AMPS: 500A DUTY CYCLE: 100% S/N: LC061916

2006 WOOD'S POWR-GRIP PC1040C VACUUM LIFTER SPECIFICATIONS MODEL: PC1104DC SERIAL NUMBER: 20060754 LOAD CAPACITY: 700 LBS (320 KG) PAD CAPACITY: 175 LBS (80 KG) POWER: 12V DC WEIGHT: 135 LBS (61 KG) MANUFACTURE DATE: JUNE 2006

2016 LINCOLN ELECTRIC 350 POWER MIG MIG TIG STICK WELDER SN: U1160603057 MULTI WELDER: MIG, PULSE-ON-PULSE, PULSED MIG, FLUX-CORED, STICK AND TIG OUTPUT RANGE: 5-350A DC RATED OUTPUT (AMPS/VOLTAGE/DUTY CYCLE): 300A/32V/60% (40% DUTY CYCLE ON 208V) INPUT POWER: 208/230/460/575/1/60 (SINGLE PHASE) INPUT CURRENT: 76/64/37/29A WIRE FEED SPEED: 50-700 IPM WIRE DIAMETER RANGE: 0.023-0.045" (SOLID), 0.035-0.045" (CORED) MAX. OCV: 67V NET WEIGHT: 255-284 LBS DEPENDING ON OPTIONS DIMENSIONS: 18.9"W X 38.8"D X 31.8"H

2022 U.S.AIR US50D55 230 CFM AIR COMPRESSOR AIREND SPEED: 3000 RPM MIN. PRESSURE: 100 PSI MAX. PRESSURE: 190 PSI MOTOR POWER: 50HP CAPACITY: 230 CFM VOLTAGE: 480V / 3PH FLA: 65A SCCR: 28KA MACHINE DIMENSIONS: 58"L X 42"W X 49"H APPX. WEIGHT: 1500 LBS S/N: 253112

2005 MILLER XMT 304 CC/CV DC INVERTER ARC WELDER (MIG, TIG, STICK) WITH 2006 MILLER 22A WIRE FEEDER UNIT. WELDER S/N: LF283281. 3 PHASE INPUT AND SINGLE PHASE INPUT: RATED OUTPUT: 300A AT 32 VDC (3PH), 225A AT 29VDC (1PH) AMPERAGE RANGE (CC): 5-400A VOLTAGE RANGE (CV): 10-35V MAX. OPEN CIRCUIT VOLTAGE: 90 VDC INPUT VOLTAGES: 208, 230/240, 460/480 VAC VOLTS: 230-460V HERTZ: 60HZ 1 PHASE: KW: 7.98, AMPS: 47.4/24.5 3 PHASE: KW: 11.5, AMPS: 30.5/18.9 RATED OUTPUT: MAX. OCV: 95 VOLTS: 32V AMPS: 300A DUTY CYCLE: 60%. WIRE FEEDER S/N: LG04. VOLTS: 24V AMPS: 7.0A HERTZ: 50/60HZ. WELD CIRCUIT RATING: MAX. VOLTS: 100V AMPS: 500A DUTY CYCLE: 100%.

2007 WOOD'S POWR-GRIP MR49AC VACUUM LIFTER LOAD CAPACITY: 500 LBS (225 KG) PAD CAPACITY: 125 LBS (56 KG) UNIT WEIGHT: 60 LBS (27 KG) POWER SYSTEM: 120V 60HZ-1PH, MAX. 3 AMPS S/N: 20070077

2011 GFS 16 X 10 X 30 CROSSDRAFT CURE / PAINT BOOTH W/ MIX ROOM AND VERTICAL INDUSTRIAL HEATER. BOOTH DIMENSIONS: WORKING 30'D X 16'W X 10'H, OVERALL 30'-4"D X 17'-4"W X 10'-8"H. MAIN DOUBLE DOOR OPENING: 12'W, 1 SET AT 12' X 8' EACH. DOOR OPENING CLEAR HEIGHT: 7'-9"H. 2X MAN ACCESS DOORS: 36"W X 84"H, W/ 18" X 24" OBSERVATION WINDOWS AND PANIC LATCH. ELECTRICAL SYSTEM: 480V, 3PH, 3W, 60HZ, 33 FLA, 15 HP LARGEST MOTOR, 20 TOTAL HP. LIGHTING VOLTAGE: 120V. CONTROL PANEL MAIN BREAKER SIZE: 60 AMP. ATTACHED PAINT MIXING ROOM: MODEL MRG-090806-N-S. EXHAUST FAN: 949 CFM, 1/2 HP, 120V, 1PH. LIGHTS: 48 TUBES, FLUORESCENT, 120/277V, CLASS 1 DIV.2. MAN ACCESS DOOR: 3'W X 7'H. MIXING ROOM ELECTRICAL: 120V, 1PH, 2W, 60HZ, 11 FLA, 1/2 HP LARGEST MOTOR, 1/2 TOTAL HP. MIXING ROOM DIMENSIONS: WORKING 9'W X 6'D X 8'H, OVERALL 9'-4"W X 7'-4"D X 10'-8"H. VERTICAL INDUSTRIAL HEATER WITH 36" BURNER AND 22" BLOWER. SUPPLY MOTOR: MODEL 01518OP3E254T, 15HP, 3PH, 460V, 18.7 FLA, ODP. SUPPLY PERFORMANCE: 16000 CFM, 675 RPM, 3888 FT/MIN TS, 0.84" W.G. SP, 10.062 BHP. BURNER: 57,000-1,710,000 BTU/HR, 36"L, NATURAL GAS. BLOWER: 7000-20000 CFM, 40 MAX. BHP, 2-3/16" X 49" SHAFT, 950 MAX. RPM. S/N: 15164A

2005 MILLER XMT 350 CC/CV AUTO-LINE WELDER (MIG,TIG,STICK) W/ 2002 MILLER S-22P12 WIRE FEED UNIT. WELDER S/N: LF284649. INPUT VOLTAGES: 230/460 VAC (1 OR 3 PH) HERTZ: 60HZ. PHASE 1: 7.98KW, 47.4/24.5A. PHASE 3: 11.5KW, 30.5/18.9A. RATED OUTPUT: MAX. OPEN CIRCUIT VOLTAGE: 95 VDC. VOLTS: 32. AMPS: 300A. DUTY CYCLE: 60%. WIRE FEEDER S/N: LC061921. VOLTS: 24V. AMPS: 7.0A. HERTZ: 50/60HZ. WELD CIRCUIT RATING: MAX. VOLTS: 100V. AMPS: 500A. DUTY CYCLE: 100%.

2002 MILLER XMT 304 CC/CV DC INVERTER ARC WELDER (MIG, TIG, STICK) W/ MILLER S-22P12 WIRE FEED UNIT. 2002 MILLER XMT 350 CC/CV AUTO-LINE WELDER (MIG,TIG,STICK) W/ 2002 MILLER S-22P12 WIRE FEED UNIT. WELDER S/N: LC134007. 115V~10A. INPUT VOLTAGES: 230/460 VAC (1 OR 3 PH). HERTZ: 60HZ. PHASE 1: 7.98KW, 47.4/24.5A. PHASE 3: 11.5KW, 30.5/18.9A. RATED OUTPUT: MAX. OPEN CIRCUIT VOLTAGE: 95 VDC. VOLTS: 32. AMPS: 300A. DUTY CYCLE: 60%. WIRE FEEDER S/N: LC061915. VOLTS: 24V. AMPS: 7.0A. HERTZ: 50/60HZ. WELD CIRCUIT RATING: MAX. VOLTS: 100V. AMPS: 500A. DUTY CYCLE: 100%.

2021 METABO KFMPB 16-15F RANGE BEVELLING TOOL IN CASE N 12000 RPM 120V~ 50/60HZ 14.2A 1550W P1 W: 1550 P2 W: 900 H MAX. 45O: 19/32" / 15MM H MAX. 30O: 25/32" / 20MM B MAX. 45O: 13/16" / 21MM A: 0-90O D MIN.: 3-15/16" / 100MM M: 15.2LB / 6.9KG AH/KH M/S2: <2.5 / 1.5 LPA / KPA DB(A): 93/3 LWA / KWA DB(A): 104/3 S/N: 01753420 1030013289

2021 METABO KFMPB 16-15F RANGE BEVELLING TOOL IN CASE N 12000 RPM 120V~ 50/60HZ 14.2A 1550W P1 W: 1550 P2 W: 900 H MAX. 45O: 19/32" / 15MM H MAX. 30O: 25/32" / 20MM B MAX. 45O: 13/16" / 21MM A: 0-90O D MIN.: 3-15/16" / 100MM M: 15.2LB / 6.9KG AH/KH M/S2: <2.5 / 1.5 LPA / KPA DB(A): 93/3 LWA / KWA DB(A): 104/3 S/N: 01753420 1080013564

2011 STEEL FAB 1060 GAL VERTICAL AIR COMPRESSOR TANK MAWP: 155 PSI AT 400OF MDMT: -20OF AT 155 PSI SHELL THICKNESS: 0.250" HEAD THICKNESS: 0.250" APPX. DIMENSIONS: 48" X 144"-152H (TO APPX.15' WITH SKIRT) SHIPPING WEIGHT: APPX 2200 LBS

2016 BDS MAB525 MAGNETIC CORE DRILLING MACHINE W/3 TOOL PORTABLE BOXES OF SUPPORT TOOLING/BITS. ALL VALUES AND MEASUREMENTS IN METRIC. DIMENSIONS: 300L X 171W X 637MM H. MAGNETIC FOOT: 180L X 90MM W. APPX NET WEIGHT: 16KG. OPERATING VOLTAGE: 110/125V 50 - 60HZ 1600W. 50MM. NO: 70 - 280 MIN-1. NO: 180 - 580 MIN-1. POWER CONSUMPTION: 1600W. NOISE EMISSION: 89DB(A). VIBRATION: 0.85 M/S2. STROKE: 160MM. CORE DRILL: SHORT : 12-50MM. LONG : 12-50MM. TWIST DRILL: MAX. : 20MM. THREAD MAX. : M20. REAMING MAX. : 20MM. COUNTERSINKING MAX. : 50MM. SPEED STAGE 1: NO= 70 - 280 RPM. SPEED STAGE 2: NO= 180 - 580 RPM. SPINDLE TAPER: MK3. CORE DRILL ASSEMBLY: KEYLESS MK 3/19 (3/4") WELDON. CONNECTING CABLE LENGTH: 4M. PROTECTION CLASS: 1. PROTECTION TYPE: IP20. TOOLBOX 1: CRAFTSMAN W/ ASSORTED BITS. TOOLBOX 2: CRAFTSMAN W/ ASSORTED BITS, 1X CHUCK, 2X END MILL BIT HOLDERS. TOOLBOX 3: DEWALT W/ ASSORTED BITS, 1X CHUCK. S/N: 2018 0093

ANVER ET100S-FP 90 1000LB, 3 PAD VACUUM LIFTER WITH VLS-07 VACUUM LEAK SENSOR UNIT MAX. LOAD LENGTH: 10' MAX. LOAD WIDTH: 6'

(3) STEEL BEAM FLAT STOCK RACKS. ALL STOCK ON/IN RACKS INCLUDED

2002 HYPERTHERM POWERMAX 1000 G3 SERIES PLASMA CUTTING SYSTEM SN: 1000-023646 20A/88V - 60A/104V 200-660V (1 OR 3 PHASE) RECOMMENDED CUTTING CAPACITY: 3/4" AT >20 IPM MAX. CUT: 1" AT >10 IPM SEVERANCE CUT: 1-1/4" GOUGE CAPACITY: APPX. 11 LBS OF METAL REMOVAL P/HR MECHANIZED MACHINE TORCH: 3/8" RECOMMENDED MAX TORCH: 1/2" UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 101V 20A/108V - 60A/124V UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 121V 1.3~ 50-60HZ IPCS23 COOLING

(6) INFRATECH W-3024/3028 MOBILE ADJUSTABLE INFRARED RADIANT HEAT LAMP. (1) MODEL W-3028 SN:16036 3000W 208V REPLACEMENT ELEMENT: 10-2040. (2) MODEL W-3024 SN: 17013 3000W 240V REPLACEMENT ELEMENT: 10-2030. (3) MODEL W-3024 SN: 17013 3000W 240V REPLACEMENT ELEMENT: 10-2030. (4) MODEL W-3028 SN: 16306 3000W 208V REPLACEMENT ELEMENT: 10-2040. (5) MODEL W-3024 SN: 17041 3000W 240V REPLACEMENT ELEMENT: 10-2030. (6) MODEL W-3024 SN: 17041 3000W 240V REPLACEMENT ELEMENT: 10-2030.

2001 HYPERTHERM POWERMAX 1000 G3 SERIES PLASMA CUTTING SYSTEM SN: 1000-011128 20A/88V - 60A/104V 200-660V (1 OR 3 PHASE) RECOMMENDED CUTTING CAPACITY: 3/4" AT >20 IPM MAX. CUT: 1" AT >10 IPM SEVERANCE CUT: 1-1/4" GOUGE CAPACITY: APPX. 11 LBS OF METAL REMOVAL P/HR MECHANIZED MACHINE TORCH: 3/8" RECOMMENDED MAX TORCH: 1/2" UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 101V 20A/108V - 60A/124V UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 121V 1.3~ 50-60HZ IPCS23 COOLING

ANVER U125-6 1200LB, 6 PAD VACUUM LIFTER WITH VLS-07 VACUUM LEAK SENSOR UNIT MAX. LOAD LENGTH: 10' MAX. LOAD WIDTH: 6' RATED LOAD PER CROSSARM: 400LB

ROYSON 4LC VIBRATORY FINISHER MACHINE W/ EXTERNAL OPEN TOPPED TANK 10HP, 208V, 3PH, 20A, 60HZ DIMENSIONS: 44"W X 26-1/2"D X 45-1/2"H

GALBREATH SELF DUMPING HOPPER - STEEL

2009 MAZAK 3D FABRI GEAR 150 LASER CUTTING MACHINE SN: 214844 200V, 3PH, 300A, 110.7 KVA, 60HZ MAX. WORKPIECE SIZE: 6" X 26.25' MAX. LOAD CAP.: 330KG / 728 LBF VOLTAGE 3 PHASE: 230 - 460V RATED LASER OUTPUT: 4000W LASER MODEL: YB-L 400 A8M 6E NC UNIT: MAZAK & FANUC L-64, FANUC POWER MATE PRIMARY AXIS STROKE: X: 352.6" U: 345.6" V: 91.14" Y: 38.78" Z: 14.57" A: 360 DEG B: 135 DEG C: 360 DEG RAPID TRAVERSE: X/U/V AXIS: 328 FT/MIN Y AXIS: 118.12 FT/MIN Z AXIS: 98.4 FT/MIN A AXIS: 160 DEG/SEC B AXIS: 160 DEG/SEC C AXIS: 20,000 DEG/MIN MAX. MACHINING FEED RATE: 32.8 FT/MIN AXIS DRIVE SYSTEM: AC SERVOMOTOR X/U/V AXIS: RACK & PINION Y/Z AXIS: BALL SCREW CUTTING HEAD: WITH LENS OF FOCAL DISTANCE 7.5" LASER OSCILLATOR SPECIFICATION: LASER TYPE: CO2 GAS LASER OSCILLATION MODEL AND CONFIGURATION: COAXIAL TYPE, HIGH SPEED AXIAL TYPE, INTEGRATED OSCILLATOR AND POWER UNIT TYPE CONTINUOUSLY RATED OUTPUT: 4,000W OUTPUT VARIABLE RANGE: 800 - 4,000W PULSE MODE: NORMAL PULSE PULSE FREQUENCY AND PULSE DUTY: 0 - 1 KHZ (NORMAL PULSE): 0 - 100% 1 -2 KHZ (NORMAL PULSE): 20 -100% BEAM MODE: MAIN COMPONENT - TEMOO BEAM OD: MAX. 0.87" BEAM DIVERGENCE ANGLE: 2.0 MRAD OPUTPUT STABILITY: 2.0% LASER GAS COMPOSITION: MIXED GASES (HE, N2 AND CO2) LASER GAS MIXING RATIO: HE (74.9%), N2 (23.4 1%) AND CO2 (1.7 0.2%) GAS CONSUMPTION IN CONT. OPERATION: 30NL (NORMAL 1.06 FT3)/HR BEAM SHUTTER: INTEGRATED MECHANICAL SHUTTER OTHER: A CIRCULAR POLARIZER AND A POWER MONITOR ARE EQUIPPED MAX. MACHINING DIMENSIONS: ROUND PIPE: [(0.79" - 6.00") X L314.96"] SQUARE PIPE: [(0.79" - 6.00") X L314.96"] HEIGHT OF CHUCK CENTER: 37.40" MACHINE WEIGHT: 28,400KG / 62610 LBF

ASSORTED WELDERS, COOLING UNIT. PARTS UNITS

FLOOR RACK FULL OF (410) C-CLAMPS AND A FEW ASSORTED OTHERS. RACK AND ALL ITEMS IN AND ON INCLUDED

GALBREATH SELF DUMPING HOPPER - STEEL

SHOP CART OF ASSORTED C- CLAMPS, ALL IN AND ON CART AND CART INCLUDED

HARBIL FLUID 5G-HD MANAGEMENT HIGH SPEED PAINT MIXER 120V, 60HZ, 9A REMANUFACTURED BY: IES - INDUSTRIAL ENGINEERED SOLUTIONS TICKER METER: 005202

2001 HYPERTHERM POWERMAX 1000 G3 SERIES PLASMA CUTTING SYSTEM SN: 1000-018422 20A/88V - 60A/104V 200-660V (1 OR 3 PHASE) RECOMMENDED CUTTING CAPACITY: 3/4" AT >20 IPM MAX. CUT: 1" AT >10 IPM SEVERANCE CUT: 1-1/4" GOUGE CAPACITY: APPX. 11 LBS OF METAL REMOVAL P/HR MECHANIZED MACHINE TORCH: 3/8" RECOMMENDED MAX TORCH: 1/2" UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 101V 20A/108V - 60A/124V UO 300V: X@40OC: HYP I2, 50% - 60A, 75% - 48A, 100% - 42A HYP U2, 50% - 140V, 75% - 140V, 100% - 140V IEC I2, 75% - 60A, 100% - 52A IECU2, 75% - 124V, 100% - 121V 1.3~ 50-60HZ IPCS23 COOLING

2022 BEKO DRYPOINT RA 203 PSI, 2.3L AIR DRYER UNIT MODEL RAC150NA-P JT SN: 220000694/22 NOMINAL FLOW RATE (ISO1217): 150 SCFM AMBIENT TEMP: 34...113OF COMPRESSED AIR: 2.3L REFRIGERANT CIRCUIT: R407C/17.3/4 OZ. GWP 1774 V 0.3L PS HP315/LP 162 PSI TS 14...248OF ELECTRIC: IP20 1/115V 10%/60HZ TOTAL INPUT: 10.2A MAX. FUSE: 20A MCA: 12.6A POWER/ FLA/ LRA: COMPRESSOR: 890W/ 9.5A/ 42.0A FAN: 95W/ 0.8A/

STEEL METAL SHOP TABLE LOADED WITH ASSORTED STEEL WELDING CLAMPS

UNI-RAM URS500 SOLVENT RECYCLER VOLTS. AC: 110-120V AMPS: 12.5 PHASE: SINGLE HERTZ: 50/60HZ EXPLOSION PROOF: CLASS I, DIVISION 1, GROUP D-T2C CLASS I, DIVISION 2, GROUP D-T2C NON HAZARDOUS LOCATIONS S/N: 659203

(5) I-BEAM BAR/FLAT STOCK RACKS. ALL STOCK ON/IN RACKS INCLUDED

2004 JET JMD-18 MILLING/DRILLING MACHINE SN: 4091035 MOTOR: SN: JD80806 2HP, 1.5KW 60HZ, 4 POLE 230V, 15A, 1PH HEAT: 60O CLASS: E CAPABILITIES LISTED FOR MILD STEEL: DRILLING CAPACITY: 1" FACE MILLING CAPACITY: 2-1/2" END MILL CAPACITY: 3/4" WORK TABLE CAPACITY: 400 LBS SPINDLE: TAPER: R-8 TAPER SPEEDS 110-2580 RPM MAX DISTANCE SPINDLE TO TABLE: 17-1/4" TABLE DIMENSIONS: 32-1/4"L X 9-1/2"W THROAT: 7-15/16" MACHINE WEIGHT: APPX. 800 LBS.

2020 METABO KFMPB 15-10F RANGE BEVELLING TOOL IN CASE 12500 RPM 120V~ 50/60HZ 13.0A 1500W P1 W: 1500 P W: 840 H MAX. 45O: 3/8" / 10MM H MAX. 30O: 1/2" / 13MM B MAX. 45O: 9/16" / 14MM A: 0-90O D MIN.: 2-15/16" / 75MM M: 11.2LB / 5.1KG AH/KH M/S2: <2.5 / 1.5 LPA / KPA DB(A): 91/3 LWA / KWA DB(A): 102/3 S/N: 01755429 9990067824