24 Single Facility Auction of AK Tool MFG Owner Retiring
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
89
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2019 | MAKINO | U6 |
2019 MAKINO U6 WIRE EDM. AXIS TRAVELS (X/Y/Z): ~25.6" X 17.7" X 16.5" (650MM X 450MM X 420MM). U/V AXIS TRAVELS: 2.95" (75MM) FOR TAPER CUTTING. MAX WORKPIECE SIZE (W X H X D): ~39.4" X 31.5" X 16.5" (1000MM X 800MM X 400MM). MAX WORKPIECE WEIGHT: ~3,300 LBS (1500 KG). MAX TAPER ANGLE: UP TO 15 STANDARD, WITH HIGHER ANGLES POSSIBLE (E.G., 45 WITH OPTIONS). WIRE DIAMETER: 0.004" TO 0.012" (0.10MM TO 0.30MM). EQUIPPED WITH: HYPER I CONTROL, INTRGRATED CARTRIDGE TYPE FILTRATION SYSTEM, CHILLER, TRANSFORMER.
|
🔒 Subscribe |
|
|
2019 | MAKINO | U3 |
2019 MAKINO U3 WIRE EDM. TABLE: 4-SIDED 24.8 X 17.7 X-AXIS TRAVEL:14.6" Y-AXIS TRAVEL: 10.6" Z-AXIS TRAVEL: 8.7" U AXIS: 2.0" V AXIS: 2.0" MAXIMUM WORKPIECE SIZE: 30.3" X 23.2" X 8.7" TALL MAXIMUM WORKPIECE WEIGHT: 1,323 LB TANK SIZE: 31.10" X 24.05" AVAILABLE WIRE SIZE: 0.004", 0.006", 0.008", 0.010", 0.012". EQUIPPED WITH: HYPER I CONTROL INTRGRATED CARTRIDGE TYPE FILTRATION SYSTEM CHILLER TRANSFORMER.
|
🔒 Subscribe |
|
|
2016 | OKUMA | GENOS M560-V |
2016 OKUMA GENOS M560-V VERTICAL MACHINING CENTER TABLE SIZE: 51.18 INCH X 22.05 INCH X TRAVEL: 41.34 INCH Y TRAVEL: 22.05 INCH Z TRAVEL: 18.11 INCH RAPID X RATE: 1,575 IPM RAPID Y RATE: 1,575 IPM RAPID Z RATE: 1,262 IPM MAX TABLE LOAD: 1,980 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEEDS: 15,000 RPM SPINDLE TAPER: CAT 40 TOOL CAPACITY: 32 COOLANT PRESSURE: 1,000 PSI EQUIPPED WITH: OSP-P300M CONTROLLER LNS CHIP CONVEYER RENISHAW PROBE THROUGH SPINDLE COOLANT TOOL PRE-SETTER 2,004 TOTAL CUTTING HOURS
|
🔒 Subscribe |
|
|
OKAMOTO | ACC12-24ST |
OKAMOTO MODEL ACC12-24ST HYDRAULIC SURFACE GRINDER. FULL SYSTEM REBUILD IN 2022. GRINDING CAPACITY: 24"(L) X 12"(W). DISTANCE UNDER WHEEL TO TABLE SURFACE MAXIMUM: 13.7" (12" WHEEL). SURFACE LENGTH: 24". SURFACE WIDTH: 12". LONGITUDINAL TRAVEL MAXIMUM: 29.5". CROSS TRAVEL MAXIMUM: 13.6". T-SLOTS (NO. X WIDTH): 1 X 0.7". HYDRAULIC FEED: 1 ~ 82 FT/MIN. HAND FEED (PER REVOLUTION): 1.85". HYDRAULIC INTERMITTENT FEED: 0.02" - 0.8". HYDRAULIC CONTINUOUS FEED: 4 ~ 40 IN/MIN. HAND FEED PER REVOLUTION: 0.250". HANDWHEEL GRADUATION: 0.001". AUTOMATIC FEED PER TABLE STROKE: 0.0001" - 0.0015". AUTOMATIC FEED PER SADDLE REVERSAL: 0.0001" - 0.0015". HAND FEED (PER REVOLUTION): 0.025". MANUAL MICRO FEED (PUSH BUTTON) :0.0001" - 0.0015". HANDWHEEL GRADUATION: .0.0001". VERTICAL RAPID FEED & DOWNFEED: 0.5 HP. RAPID FEED (60 HZ): 16 IN/MIN. SPINDLE SPEED (60 HZ): 1,800 RPM. HYDRAULIC PUMP: 2 HP. HYDRAULIC TANK: 26 GALLONS. EQUIPPED WITH OS WALKER ELECTRO MANETIC CHUCK W/ VARIABLE CONTROL COOLANT SYSTEM. MACHINE: 103"(L) X 74"(W) X 70"(H) - 5,380 LBS. COOLANT TANK: 48" (L) X 32" (W) X 24" (H) - 1,200 LBS.
|
🔒 Subscribe | |
|
|
1997 | AGIE | AGIECUT 250HSS |
1997 AGIE AGIECUT 250HSS WIRE EDM WORK AREA: 15.74" X 9.84" Z-AXIS TRAVEL: 9.88" 0.004"-0.013" WIRE DIAMETER EQUIPPED WITH: SUBMERGED PART CAPABILITY AUTO THREADING (3) ADDITIONAL ELECTRICAL CABINETS TO BE INCLUDED FOR SPARE PARTS
|
🔒 Subscribe |
|
|
2012 | DOALL | 2012-2A |
2012 DOALL 2012-2A VERTICAL BAND SAW 5-INCH THROAT BAND TO COLUMN: 20-INCH MAXIMUM WORK HEIGHT: 12-INCH BLADE WIDTH CAPACITY: 1/16 TO 1-INCH BLADE SPEED RANGE (INFINITELY VARIABLE): 5 TO 5200 FPM TABLE SIZE: 30-1/2 X 24-INCH SAW BAND LENGTH: 154-INCH MOTOR HP: 2 EQUIPPED WITH: DWB-15 WELDER/GRINDER/SHEAR WORK LIGHT MACHINE PARTS MANUAL
|
🔒 Subscribe |
|
|
MOORE | NO. 3 |
MOORE NO. 3 JIG BORER TABLE SIZE: 24" X 11" SPINDLE SPEEDS: 60 - 2500 RPM MAXIMUM DISTANCE SPINDLE TO TABLE: 21" POWER DOWN FEED: .003"/.00015"/.00075" PER REVOLUTION SPINDLE TRAVEL: 5" ELECTRICAL: 480V / 3PH TWO SPEED MOTOR HP: 1 / 2 EQUIPPED WITH: MITUTOYO 2-AXIS DIGITAL READ OUT TABLE VISE LOT OF PICTURED TOOLING AND FIXTURES
|
🔒 Subscribe | |
|
|
SYSTEM 3R | EDM |
SYSTEM 3R EDM VISE W/ ADJUSTMENT TOOL - (1) 4 INCH STAINLESS STEEL VISE (1) ADJUSTMENT TOOL
|
🔒 Subscribe | |
|
|
MITSUI | MSG-200MH/6-12 |
200MH/6-12 SURFACE GRINDER TABLE SIZE: 6" X 12" TABLE LONGITUDINAL TRAVEL: 15" CROSS TRAVEL: 8" SPINDLE SPEEDS: 3400 RPM EQUIPPED WITH: OS WALKER FINE PULL ELECTRO MAGNETIC CHUCK VARIABLE MAGNET CONTROL WORK LIGHT TABLE MOUNTED DUST COLLECTION PORT 2-AXIS DIGITAL READ OUT
|
🔒 Subscribe | |
|
|
HOPKINS | #3 |
HOPKINS #3 60 TON SCREW PRESS TABLE SIZE: 24 INCH X 27 INCH 12-1/4 INCH STROKE EQUIPPED WITH: BOLSTER PLATE PRESISION TABLE GUIDE RAILS
|
🔒 Subscribe | |
|
|
MITSUI | MSG-200H/ 6-12 |
MITSUI MSG-200H/ 6-12 SURFACE GRINDER. TABLE SIZE: 6" X 12" TABLE LONGITUDINAL TRAVEL: 15" CROSS TRAVEL: 8" SPINDLE SPEEDS: 3400 RPM. EQUIPPED WITH: OS WALKER FINE PULL ELECTRO MAGNETIC CHUCK, VARIABLE MAGNET CONTROL, WORK LIGHT, TABLE MOUNTED DUST COLLECTION PORT, 2-AXIS DIGITAL READ OUT.
|
🔒 Subscribe | |
|
|
TREE | 2VGC |
2VGC VERTICAL KNEE MILL WITH POWER KNEE AND CROSS FEED. TABLE SIZE: 10-1/2" X 42". SPINDLE SPEEDS (12): 50 - 2500 RPM. MOTOR HP: 3. ELECTRICAL: 230/460V/3PH/60HZ. EQUIPPED WITH: TABLE VISE, COLLET RACK W/ASSORTED COLLETS.
|
🔒 Subscribe | |
|
|
TREE | 2VG |
1990 TREE 2VG VERTICAL KNEE MILL - TABLE SIZE: 10-1/2" X 42" SPINDLE SPEEDS (12): 50 - 2500 RPM MOTOR HP: 3 ELECTRICAL: 230/460V EQUIPPED WITH: X-AXIS POWER FEED SONY 2-AXIS DIGITAL READ OUT COLLET RACK W/ COLLETS
|
🔒 Subscribe | |
|
|
LISTA |
11 DRAWER LISTA BRAND STORAGE CABINET MISC SHOP HARDWARE AND FITTINGS
|
🔒 Subscribe | ||
|
|
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOOL HOLDER
|
🔒 Subscribe | |||
|
|
LISTA |
9 DRAWER LISTA BRAND STORAGE CABINET - MISC SHOP HARDWARE AND FITTINGS
|
🔒 Subscribe | ||
|
|
LISTA |
8 DRAWER LISTA BRAND STORAGE CABINET
|
🔒 Subscribe | ||
|
|
LISTA |
9 DRAWER LISTA BRAND STORAGE CABINET - MISC SHOP HARDWARE AND FITTINGS
|
🔒 Subscribe | ||
|
|
KEARNEY AND TRECKER | 2CH |
KEARNEY AND TRECKER MODEL 2CH HORIZONTAL MILL TABLE SIZE : 12 INCH X 50 INCH MOTOR: 5 H.P. SPINDLE SPEEDS: 25-1500 RPM SPINDLE TAPER: #50 TABLE SPEED: 1/4 32 IPM EQUIPPED WITH: TABLE MOUNTED Z-AXIS CLAMPING FIXTURE SONY DIGITAL READ OUT
|
🔒 Subscribe | |
|
|
DONALDSON TORIT | 84 |
DONALDSON TORIT MODEL 84 DUST COLLECTOR CLOTH FILTER 150 SQ FT CFM RATING @ 5 SP 1231 CFM MAIN MOTOR, HORSEPOWER 3 HP
|
🔒 Subscribe | |
|
|
HARDINGE | DV-59 |
HARDINGE MODEL DV-59 PRECISION TOOL ROOM LATHE SWING: 9 INCHES (OVER BED) DISTANCE BETWEEN CENTERS: 17 INCHES COLLET CAPACITY: 1-1/16 INCH ROUND, 7/8 INCH HEX (USING 5C COLLETS) SPINDLE SPEEDS: INFINITELY VARIABLE, TYPICALLY 230-3500 RPM SPINDLE NOSE: HARDINGE TAPERED (5C) POWER: 1 HP MOTOR (3-PHASE, 220V STANDARD) BED LENGTH: 30 INCHES (DOVETAIL BED) TURRET: 6-POSITION ENDWORKING TURRET (COMMON) CROSS SLIDE TRAVEL: APPROX. 3-3/4 TO 4-1/4 INCH TURRET SLIDE TRAVEL: APPROX. 4 INCH TAILSTOCK: #2 MT TAPER
|
🔒 Subscribe | |
|
|
HYLO-SPEED | 24N11 |
HYLO-SPEED 6 X 4 MODEL 24N11 PRECISION MACHINE VISE AND 12 INCH DIAMETER T-SLOT MOUNT ROTARY TABLE WITH MANUAL REVOLUTION
|
🔒 Subscribe | |
|
|
TRINCO | 48X24SL/400PT |
TRINCO MODEL 48X24SL/400PT DRY BLAST SYSTEM W/ PULL THRU DUST COLLECTOR. WORK AREA: 48 INCH WIDTH X 24 INCH DEPTH X 23 INCH HEIGHT. EQUIPPED WITH: MEDIA RECYCLING SYSTEM, BLAST GUN W. TUNGSTEN CARBIDE NOZZLE, 25 CFM BLAST RANGE, FOOT PEDAL OPERATION.
|
🔒 Subscribe | |
|
|
TAFT-PIERCE | 612 |
TAFT-PIERCE 612 W/ OS WALKER MAGNET. TABLE SIZE: 6" X 12". TABLE LONGITUDINAL TRAVEL: 15". CROSS TRAVEL: 8". SPINDLE SPEEDS: 3400 RPM. EQUIPPED WITH: OS WALKER COARSE PULL PERMANENT MAGNET DUST SUCTION VENT.
|
🔒 Subscribe | |
|
|
SYSTEM 3R |
SYSTEM 3R EDM FIXTURE RAILS FOR AGIE 250/270 HSS - (1) SET OF 4 SYSTEM 3R RAILS PART # 16300-00 (1) SET OF 2 SYSTEM 3R RAILS PART # 0656-00 (1) SYSTEM 3R PART # 16388-00 EDM RAIL (1) BAG OF MOUNTING HARDWARE
|
🔒 Subscribe | ||
|
|
DAREX | V-390 |
DAREX MODEL V-390 CUTTING TOOL DIAMETER: 1/8-3/4 INCH (319 MM) OPERATION MODE: MANUAL POINT ANGLES SHARPENED: 118-140 EQUIPPED WITH: 180-GRIT DIAMOND WHEEL MORSE TAPER CHUCK
|
🔒 Subscribe | |
|
|
HARIG | GRIND ALL FIXTURE |
LOT OF (2) HARIG GRIND ALL FIXTURES V-B LOCK CAPACITY 1-1/4 INCH CENTER HEIGHT: 3.000 INCH THROUGH HOLE 1-3/16 INCH GRADUATION: 360 DEGREES 24 DIVISION INDEXING +/- 10 SECONDS V-BLOCK WITHIN: 0.0001 SQUARE AND PARALLEL TO: 0.0001
|
🔒 Subscribe | |
|
|
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOOL HOLDER INCLUDES 24 CAT 40 ASSORTED TOOLS AND HOLDERS
|
🔒 Subscribe | |||
|
|
MITUTOYO | ID-F150HE |
MITUTOYO ID-F150HE PIN GAUGE W/ 12X48 INCH GRANITE TOP
|
🔒 Subscribe | |
|
|
VPMS | PC-14 |
14 INCH OPTICAL COMPARATOR - SCREEN DIAMETER: 14 INCH TABLE SIZE: 6 INCH X 18 INCH MEASURING RANGE (LATERAL): 8 INCH MEASURING RANGE (VERTICAL): 4 INCH CROSS TRAVEL FOR FOCUSING: 1.125 TO 1.375 INCH STAGE ANGLING (HELIX ROTATION): +/- 30 EQUIPPED WITH: POWER ELEVATION 2 AXIS ACCURITE DIGITAL READ OUT DUST HOOD
|
🔒 Subscribe | |
|
|
PMC | WORK-A-MATIC |
PMC WORK-A-MATIC VERTICAL ROLL IN BAND SAW BLADE TRAVEL: 9 INCH WORK HEIGHT: 14.5 INCH CAPACITY: 9 INCH X 14.5 INCH TABLE SIZE: 29 INCH X 18 INCH BLADE WIDTH: .25 INCH TO .75 INCH BLADE LENGTH: 120 INCH MOTOR HP: 1 HP
|
🔒 Subscribe | |
|
|
LOT OF (2) EDM VISES - (1) 4 INCH WIDTH HSS VISE (1) 6 INCH WIDTH HSS VISE WITH TOP CLAMP
|
🔒 Subscribe | |||
|
|
MISC. MACHINE TOOL AND TAPS
|
🔒 Subscribe | |||
|
|
STARRETT |
LOT OF (11) PRECISION MEASUREMENT TOOLS AND MACHINE SETUP EQUIPMENT - (2) SETS OF MACHINE PARALLELS, (1) STARRETT 2" MICROMETER, (1) STARRETT 0-3" DEPTH GAGE W/ CASE, (1) STARRETT STANDARD ACCURACY CALIPER W/ CASE, (1) BOX OF MISC. ASSORTED MACHINE SETUP TOOLS, (1) BOX OF MISC. LENGTH VISE PARALELLS, (1) DIAL INDICATOR WITH ADJUSTABLE STAND, (1) TAP HANDLE, (1) LOT OF FEELER GAGES, (1) MACHINIST SQUARE
|
🔒 Subscribe | ||
|
|
BOYAR SHULTZ | CHALLENGER H612 |
BOYAR SHULTZ CHALLENGER H612 SURFACE GRINDER. MAXIMUM GRINDING CHUCK SIZE: 6.0 X 12.0 INCH. MAXIMUM DISTANCE UNDER WHEEL TO TABLE: 7.0 INCH. TABLE LOAD CAPACITY W/CHUCK: 110 LBS. MAXIMUM TABLE TRAVEL: 13.0 INCH. MAXIMUM CROSS TRAVEL: 7.0 INCH. GRINDING WHEEL SIZE: 7.0 X 12 X 114 INCH. SPINDLE HORSEPOWER: 1 HP. SPINDLE SPEED: 3,450 RPM. EQUIPPED WITH: OS WALKER FINE PULL ELECTRO MAGNETIC CHUCK, ONE SHOT LUBRICATION SYSTEM.
|
🔒 Subscribe | |
|
|
PMC | WORK-A-MATIC |
PMC WORK-A-MATIC VERTICAL ROLL IN BAND SAW BLADE TRAVEL: 9 INCH WORK HEIGHT: 14.5 INCH CAPACITY: 9 INCH X 14.5 INCH TABLE SIZE: 29 INCH X 18 INCH BLADE WIDTH: .25 INCH TO .75 INCH BLADE LENGTH: 120 INCH MOTOR HP: 1 HP
|
🔒 Subscribe | |
|
|
TOLEDO | 1000 LBS. |
1000 LBS. FLOOR SCALE 24" X 24" PLATFORM SIZE MANUAL TARE WEIGHT ADJUSTMENT
|
🔒 Subscribe | |
|
|
LOT OF (3) LAST WORD SINGLE POINT WHEEL DRESSER. LOT CONTAINS: (1) 16 INCH WHEEL DRESSER (2) 8 INCH WHEEL DRESSERS
|
🔒 Subscribe | |||
|
|
TOOL CABINET WITH ASSORTED DRILL BITS AN END MILLS
|
🔒 Subscribe | |||
|
|
LOT OF MISC. DRILL CHUCKS AND CLAMPS
|
🔒 Subscribe | |||
|
|
CADILLAC | HG-4 |
LOT OF (2) CADILLAC PLA-CHEK MODEL HG-4 MECHANICAL HEIGHT GAGES EQUIPPED WITH: MEASUREMENT RANGE: 3/8 TO 6 INCH ACCURACY/READOUT: READS TO 0.0001 INCHES
|
🔒 Subscribe | |
|
|
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOOL HOLDER
|
🔒 Subscribe | |||
|
|
DONAU | DR-32 |
DONAU MODEL DR-32 RADIAL ARM DRILL ARM LENGTH: 36" FEED RANGE: 0.075-0.3 MM/MIN FEED STEPS: 3 QUILL STROKE: 190 MM 7.5" TABLE AREA: 48" X 24" EQUIPPED WITH: TABLE VISE DRILL CHUCK W/KEY WORK LIGHT INTEGRATED COOLANT SYSTEM W/TANK
|
🔒 Subscribe | |
|
|
CLAUSING | ENGINE LATHE |
1970 CLAUSING ENGINE LATHE SWING:18 INCH DISTANE BETWEEN CENTERS: 36 INCH MOTOR HP: 5 EQUIPPED WITH: 9 INCH 3 JAW CHUCK ADJUSTABLE TOOL POST TAIL STOCK DRILL CHUCK W/KEY
|
🔒 Subscribe | |
|
|
SYSTEM 3R | 250/270 HSS |
SYSTEM 3R EDM FIXTURE CLAMPS FOR AGIE 250/270 HSS - (1) SET OF 6 HSS CLAMPS
|
🔒 Subscribe | |
|
|
LOT OF MACHINE TOOL HOLDER AND MISC. TOOLING - LOT CONSISTS OF: (3) TOOL HOLDERS W/ ENDMILLS (1) BOX OF MISC. TURNING INSERTS (1) RATCHET TYPE WRENCH WITH COLLET ATTACEHMENTS
|
🔒 Subscribe | |||
|
|
PRATT & WHITNEY | PRECISION MACHINE LEVEL |
8 INCH PRECISION MACHINE LEVEL W/ BUBBLE LEVEL, NORTON DIAMOND SUPER ABRASIVE GRINDING WHEEL 7 INCH X 1/4 INCH X 1-1/4 INCH D150
|
🔒 Subscribe | |
|
|
LOT OF VISES AND PNEUMATIC DIE GRINDER - (1) 6 INCH X 4 INCH PRECISION MACHINE VISE (1) 12 INCH WIDE ADJUSTABLE TABLE VISE W/ LOCKING SWIVEL AND REPLACABLE JAWS (1) AIR POWERED DIE/TOOL GRINDER W/CASE
|
🔒 Subscribe | |||
|
|
LOT OF VARIOUS SIZED ENDMILLS AND BRASS HAMMERS - LOT CONSISTS OF: (3) BOXES OF ASSORTED HSS AND CARBIDE ENDMILLS (1) SET OF 3 CARBIDE TIPPED FACE MILLS (1) BOX OF BRASS MACHINISTS HAMMERS AND BRASS KEYSTOCK
|
🔒 Subscribe | |||
|
|
LOT OF (4) PRECISION MEASUREMENT TOOLS. CONTAINS (2) SETS OF PRECISION GAGE PINS, (1) DEPTH GAGE, (1) SET OF PRECISION GAGE BLOCKS
|
🔒 Subscribe |
2019 MAKINO U6
2019 MAKINO U6 WIRE EDM. AXIS TRAVELS (X/Y/Z): ~25.6" X 17.7" X 16.5" (650MM X 450MM X 420MM). U/V A...
2019 MAKINO U3
2019 MAKINO U3 WIRE EDM. TABLE: 4-SIDED 24.8 X 17.7 X-AXIS TRAVEL:14.6" Y-AXIS TRAVEL: 10.6" Z-AXIS ...
2016 OKUMA GENOS M560-V
2016 OKUMA GENOS M560-V VERTICAL MACHINING CENTER TABLE SIZE: 51.18 INCH X 22.05 INCH X TRAVEL: 41.3...
OKAMOTO ACC12-24ST
OKAMOTO MODEL ACC12-24ST HYDRAULIC SURFACE GRINDER. FULL SYSTEM REBUILD IN 2022. GRINDING CAPACITY: ...
1997 AGIE AGIECUT 250HSS
1997 AGIE AGIECUT 250HSS WIRE EDM WORK AREA: 15.74" X 9.84" Z-AXIS TRAVEL: 9.88" 0.004"-0.013" WIRE ...
2012 DOALL 2012-2A
2012 DOALL 2012-2A VERTICAL BAND SAW 5-INCH THROAT BAND TO COLUMN: 20-INCH MAXIMUM WORK HEIGHT: 12-I...
MOORE NO. 3
MOORE NO. 3 JIG BORER TABLE SIZE: 24" X 11" SPINDLE SPEEDS: 60 - 2500 RPM MAXIMUM DISTANCE SPINDLE T...
SYSTEM 3R EDM
SYSTEM 3R EDM VISE W/ ADJUSTMENT TOOL - (1) 4 INCH STAINLESS STEEL VISE (1) ADJUSTMENT TOOL...
MITSUI MSG-200MH/6-12
200MH/6-12 SURFACE GRINDER TABLE SIZE: 6" X 12" TABLE LONGITUDINAL TRAVEL: 15" CROSS TRAVEL: 8" SPIN...
HOPKINS #3
HOPKINS #3 60 TON SCREW PRESS TABLE SIZE: 24 INCH X 27 INCH 12-1/4 INCH STROKE EQUIPPED WITH: BOLSTE...
MITSUI MSG-200H/ 6-12
MITSUI MSG-200H/ 6-12 SURFACE GRINDER. TABLE SIZE: 6" X 12" TABLE LONGITUDINAL TRAVEL: 15" CROSS TRA...
TREE 2VGC
2VGC VERTICAL KNEE MILL WITH POWER KNEE AND CROSS FEED. TABLE SIZE: 10-1/2" X 42". SPINDLE SPEEDS (1...
TREE 2VG
1990 TREE 2VG VERTICAL KNEE MILL - TABLE SIZE: 10-1/2" X 42" SPINDLE SPEEDS (12): 50 - 2500 RPM MOTO...
LISTA
11 DRAWER LISTA BRAND STORAGE CABINET MISC SHOP HARDWARE AND FITTINGS...
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOO
LISTA
9 DRAWER LISTA BRAND STORAGE CABINET - MISC SHOP HARDWARE AND FITTINGS...
LISTA
8 DRAWER LISTA BRAND STORAGE CABINET...
LISTA
9 DRAWER LISTA BRAND STORAGE CABINET - MISC SHOP HARDWARE AND FITTINGS...
KEARNEY AND TRECKER 2CH
KEARNEY AND TRECKER MODEL 2CH HORIZONTAL MILL TABLE SIZE : 12 INCH X 50 INCH MOTOR: 5 H.P. SPINDLE S...
DONALDSON TORIT 84
DONALDSON TORIT MODEL 84 DUST COLLECTOR CLOTH FILTER 150 SQ FT CFM RATING @ 5 SP 1231 CFM MAIN MOTOR...
HARDINGE DV-59
HARDINGE MODEL DV-59 PRECISION TOOL ROOM LATHE SWING: 9 INCHES (OVER BED) DISTANCE BETWEEN CENTERS: ...
HYLO-SPEED 24N11
HYLO-SPEED 6 X 4 MODEL 24N11 PRECISION MACHINE VISE AND 12 INCH DIAMETER T-SLOT MOUNT ROTARY TABLE W...
TRINCO 48X24SL/400PT
TRINCO MODEL 48X24SL/400PT DRY BLAST SYSTEM W/ PULL THRU DUST COLLECTOR. WORK AREA: 48 INCH WIDTH X ...
TAFT-PIERCE 612
TAFT-PIERCE 612 W/ OS WALKER MAGNET. TABLE SIZE: 6" X 12". TABLE LONGITUDINAL TRAVEL: 15". CROSS TRA...
SYSTEM 3R
SYSTEM 3R EDM FIXTURE RAILS FOR AGIE 250/270 HSS - (1) SET OF 4 SYSTEM 3R RAILS PART # 16300-00 (1) ...
DAREX V-390
DAREX MODEL V-390 CUTTING TOOL DIAMETER: 1/8-3/4 INCH (319 MM) OPERATION MODE: MANUAL POINT ANGLES S...
HARIG GRIND ALL FIXTURE
LOT OF (2) HARIG GRIND ALL FIXTURES V-B LOCK CAPACITY 1-1/4 INCH CENTER HEIGHT: 3.000 INCH THROUGH H...
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOO
MITUTOYO ID-F150HE
MITUTOYO ID-F150HE PIN GAUGE W/ 12X48 INCH GRANITE TOP...
VPMS PC-14
14 INCH OPTICAL COMPARATOR - SCREEN DIAMETER: 14 INCH TABLE SIZE: 6 INCH X 18 INCH MEASURING RANGE (...
PMC WORK-A-MATIC
PMC WORK-A-MATIC VERTICAL ROLL IN BAND SAW BLADE TRAVEL: 9 INCH WORK HEIGHT: 14.5 INCH CAPACITY: 9 I...
LOT OF (2) EDM VISES - (1) 4 INCH WIDTH HSS VISE (1) 6 INCH WIDTH HSS VISE WITH TOP CLAMP
MISC. MACHINE TOOL AND TAPS
STARRETT
LOT OF (11) PRECISION MEASUREMENT TOOLS AND MACHINE SETUP EQUIPMENT - (2) SETS OF MACHINE PARALLELS,...
BOYAR SHULTZ CHALLENGER H612
BOYAR SHULTZ CHALLENGER H612 SURFACE GRINDER. MAXIMUM GRINDING CHUCK SIZE: 6.0 X 12.0 INCH. MAXIMUM ...
PMC WORK-A-MATIC
PMC WORK-A-MATIC VERTICAL ROLL IN BAND SAW BLADE TRAVEL: 9 INCH WORK HEIGHT: 14.5 INCH CAPACITY: 9 I...
TOLEDO 1000 LBS.
1000 LBS. FLOOR SCALE 24" X 24" PLATFORM SIZE MANUAL TARE WEIGHT ADJUSTMENT...
LOT OF (3) LAST WORD SINGLE POINT WHEEL DRESSER. LOT CONTAINS: (1) 16 INCH WHEEL DRESSER (2) 8 INCH
TOOL CABINET WITH ASSORTED DRILL BITS AN END MILLS
LOT OF MISC. DRILL CHUCKS AND CLAMPS
CADILLAC HG-4
LOT OF (2) CADILLAC PLA-CHEK MODEL HG-4 MECHANICAL HEIGHT GAGES EQUIPPED WITH: MEASUREMENT RANGE: 3/...
3 TIER ROLLING TOOL HOLDER RACK W/ ASSORTED HOLDER AND TOOLING EQUIPPED WITH: 48 POSITION CAT 40 TOO
DONAU DR-32
DONAU MODEL DR-32 RADIAL ARM DRILL ARM LENGTH: 36" FEED RANGE: 0.075-0.3 MM/MIN FEED STEPS: 3 QUILL ...
CLAUSING ENGINE LATHE
1970 CLAUSING ENGINE LATHE SWING:18 INCH DISTANE BETWEEN CENTERS: 36 INCH MOTOR HP: 5 EQUIPPED WITH:...
SYSTEM 3R 250/270 HSS
SYSTEM 3R EDM FIXTURE CLAMPS FOR AGIE 250/270 HSS - (1) SET OF 6 HSS CLAMPS...
LOT OF MACHINE TOOL HOLDER AND MISC. TOOLING - LOT CONSISTS OF: (3) TOOL HOLDERS W/ ENDMILLS (1) BOX
PRATT & WHITNEY PRECISION MACHINE LEVEL
8 INCH PRECISION MACHINE LEVEL W/ BUBBLE LEVEL, NORTON DIAMOND SUPER ABRASIVE GRINDING WHEEL 7 INCH ...
LOT OF VISES AND PNEUMATIC DIE GRINDER - (1) 6 INCH X 4 INCH PRECISION MACHINE VISE (1) 12 INCH WIDE
LOT OF VARIOUS SIZED ENDMILLS AND BRASS HAMMERS - LOT CONSISTS OF: (3) BOXES OF ASSORTED HSS AND CAR
LOT OF (4) PRECISION MEASUREMENT TOOLS. CONTAINS (2) SETS OF PRECISION GAGE PINS, (1) DEPTH GAGE, (1