Quarterly Food and Beverage Packaging Equipment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
192
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE PRODUCT GUIDE RAILS ON CASTERS
|
🔒 Subscribe | |||
|
|
GONGDA |
GONGDA DRYING, FILLING, CAPPING, AND LABELING LINE - USED GONGDA BEVERAGE LINE WITH: FILLER/CAPPER: 16 HEAD INFEED HEIGHT: 43.5 INCHES DISCHARGE HEIGHT: 42.5 INCHES RUNS LEFT TO RIGHT ADJUSTABLE HEIGHT FEET OVERALL DIMENSIONS: LENGTH: 90 INCHES WIDTH: 73 INCHES HEIGHT: 86 INCHES LABELER: VARIABLE SPEED ADJUSTABLE RAILS INFEED HEIGHT: 44 INCHES DISCHARGE HEIGHT: 44 INCHES AUGER SCREW PITCH: 3 INCHES RUNS LEFT TO RIGHT FILM CORE DIAMETER: 2 INCHES TOUCHSCREEN CONTROLS STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 140 INCHES WIDTH: 33 INCHES HEIGHT: 67 INCHES ADJUSTABLE HEIGHT FEET PACK OFF TABLE INFEED HEIGHT: 41 INCHES RAIL HEIGHT: 3 INCHES OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 24 INCHES HEIGHT: 45.5 INCHES
|
🔒 Subscribe | ||
|
|
UNIPAC | SILVER TUBE FILLER |
UNIPAC SILVER TUBE FILLER WITH: PRODUCTION SPEED: UP TO 70 TUBES PER MINUTE TUBE SIZE RANGE: MINIMUM: 0.53 INCH DIAMETER 2.76 INCH HEIGHT MAXIMUM: 1.97 INCH DIAMETER 2.76 INCH HEIGHT FILL LEVEL: MINIMUM: 3.60 CUBIC INCHES MAXIMUM: 15.26 CUBIC INCHES AIR REQUIREMENTS: 8 BAR ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 76 INCHES WIDTH: 70 INCHES HEIGHT: 96 INCHES
|
🔒 Subscribe | |
|
|
USED STAINLESS STEEL TUBE FILLER WITH: NOZZLE DIAMETER: 1/8 INCH PUSH BUTTON CONTROLS ALLEN BRADLEY PLC STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
VOLPAK | S-200-D |
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETERS WIDTH: 60 MILLIMETERS MAXIMUM: HEIGHT: 240 MILLIMETERS WIDTH: 100 MILLIMETERS TYPES OF PRODUCTS: SOLIDS POWDERS NUMBER OF SIDES SEALED: 4 MECHANICAL POUCH OPENER PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
TRIANGLE | L 60 |
TRIANGLE L 60 VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW LENGTH: 9.5 INCHES PUSH BUTTON CONTROLS MILD STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 53 INCHES WIDTH: 57 INCHES HEIGHT: 70 INCHES
|
🔒 Subscribe | |
|
|
NORDENMATIC | 700 |
NORDENMATIC 700 AUTOMATIC TUBE FILLER AND SEALER WITH: FILL RANGE: MINIMUM: 1 MILLILITER MAXIMUM: 600 MILLILITERS TUBE SIZE RANGE: MINIMUM: DIAMETER: 10 MILLIMETERS LENGTH: 50 MILLIMETERS MAXIMUM: DIAMETER: 620 MILLIMETERS LENGTH: 280 MILLIMETERS (24) POCKET ROTARY PUCK CAROUSEL AUTO TUBE LOADER TUBE CLEANER ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
UBE | 1216 |
UBE 1216 BREAD BAGGER WITH: SEMI-AUTOMATIC BAGGER, OPERATOR LOADS PRODUCT ONTO THE INFEED CONVEYOR AND MACHINE AUTOMATICALLY LOADS PRODUCT INTO BAGS. PRODUCTS: SOFT ROLLS, HARD ROLLS, BAGELS, MUFFINS, AND PITAS. CLEATED INFEED: LENGTH: 88 INCHES WIDTH: 10 INCHES CENTERS: 24.25 INCHES HEIGHT: 2 INCHES GUARD HEIGHT: 3.5 INCHES WORKING HEIGHT: 34 INCHES (ADJUSTABLE). AIR BLOW BAG OPENING SYSTEM. AUTOMATIC PRODUCT PUSHING ARMS. 4 STATION ROTARY BAG MAGAZINE STATION FOR EASE AND SPEED OF BAG RELOADING. POWERED DISCHARGE CONVEYOR: 10 INCHES WIDE. LEFT TO RIGHT OPERATION. STAINLESS STEEL CONSTRUCTION. ANALOG PUSH BUTTON CONTROLS. AIR REQUIREMENTS: 90 PSI. ELECTRICAL: 480 VOLTS, 60 HZ, 3 PHASE.
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
TELE-SONIC | SB-180V |
TELE-SONIC SB-180V VERTICAL FORM FILL AND SEAL - USED TELE-SONIC VERTICAL FORM FILL AND SEAL WITH: OUTPUT: UP TO 55 PACKAGES PER MINUTE, DEPENDING ON APPLICATION MAXIMUM POUCH SIZE: LENGTH: 8 INCHES WIDTH: 5.5 INCHES MINIMUM POUCH SIZE: LENGTH: 2 INCHES WIDTH: 2 INCHES HOPPER CAPACITY: 10 GALLONS SEAL JAW LENGTH: VERTICAL: 7 INCHES HORIZONTAL: 8 INCHES ROTARY FILL STATION WITH (3) 2.5 INCH DIAMETER HOLES APPROXIMATE OVERALL DIMENSIONS: LENGTH: 38 INCHES WIDTH: 28 INCHES HEIGHT: 91 INCHES ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
MATRIX |
MATRIX VERTICAL FORM FILL AND SEAL BAGGER - USED MATRIX BAGGER WITH: PRODUCTION SPEED: 40 BAGS PER MINUTE, DEPENDING ON APPLICATION FORMING HORN DIAMETERS: 5.5 INCHES 4.25 INCHES 3 INCHES SEAL JAW WIDTH: 13 INCHES PRINT REGISTERED CURRENT FILM DIMENSIONS: WEB WIDTH: 12.5 INCHES CORE DIAMETER: 3 INCHES FILM GRIP SIDE BELT DIMENSIONS: LENGTH: 13 INCHES WIDTH: 1 INCH FILM TRACKING ADJUSTMENT CAPABLE OF GUSSET BAGS WITH CHANGE PARTS STAINLESS STEEL CONTACT PARTS TOUCH SCREEN HMI MOUNTED ON A MILD STEEL FRAME ELECTRICAL: 250 VOLTS, 60 HERTZ, 3 PHASE PREVIOUS BAG DIMENSIONS: LENGTH: 12 INCHES WIDTH: 5.5 INCHES
|
🔒 Subscribe | ||
|
|
FUJI FORMOST | FW-3400 |
FUJI FORMOST FW-3400 HORIZONTAL FORM FILL AND SEAL - USED FUJI FORMOST HORIZONTAL FLOW WRAPPER WITH: MAX PRODUCT WIDTH: 4.25 INCHES CENTERS: 7.5 INCHES SEAL JAW LENGTH: 8 INCHES DISCHARGE BELT DIMENSIONS: LENGTH: 30 INCHES WIDTH: 5.5 INCHES DISCHARGE HEIGHT: 34.5 INCHES EMERGENCY STOPS: 2 OVERALL DIMENSIONS: LENGTH: APPROXIMATELY 116 INCHES WIDTH: APPROXIMATELY 41 INCHES HEIGHT: APPROXIMATELY 82 INCHES MOTOR: 1440/1725/1740 RPM ELECTRICAL: 200/200/220 VOLTS, 50/60/60 HZ, 1.3/1.1/1.2 AMPS, PHASE 3
|
🔒 Subscribe | |
|
|
OYSTAR | TFS 10 |
OYSTAR TFS 10 TUBE FILLER AND SEALER WITH: INFEED: 75.5 INCHES HIGH INFEED TANK: GALLONS: 10 DIAMETER: 17.5 INCHES DISCHARGE: 34 INCHES DISCHARGE WIDTH: 4 INCHES PRODUCT PLACEMENT DIAMETER: 2 INCHES PRODUCT APERTURE: 2.5 INCH BOTTOM TO TOP FILLER: LENGTH: 5 INCHES WIDTH: 0.75 INCHES SEAL BAR LENGTH: 4 INCHES
|
🔒 Subscribe | |
|
|
HAYSSEN | ULTIMA |
HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER. OUTPUT: UP TO 100 BAGS PER MINUTE. MINIMUM BAG DIMENSIONS: LENGTH: 3 INCHES WIDTH: 2 INCHES. MAXIMUM BAG DIMENSIONS: LENGTH: 8 INCHES WIDTH: 8 INCHES. AIR REQUIREMENTS: 65 PSI. ELECTRICAL: 230 VOLTS, 1 PH, 60 HZ.
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
CLIMAX | DP4-1/LD |
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONSTRUCTION MAXIMUM OUTPUT: UP TO 28 CASES PER MINUTE (DEPENDING ON PRODUCT AND CONFIGURATION) CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 8 INCHES WIDE X 3 INCHES HIGH MAXIMUM: 22 INCHES LONG X 15 INCHES WIDE X 16 INCHES HIGH 6 LANES APPROXIMATE DIMENSIONS: LENGTH: 12 FEET WIDTH: 42 INCHES ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3 AIR REQUIREMENTS: 60PSI
|
🔒 Subscribe | |
|
|
LOVESHAW | SP304 |
LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 7.6 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
MARQ | HPE412-3(RH)DL |
MARQ HPE412-3(RH)DL TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ TAPE BOTTOM SEAL CASE ERECTOR WITH: PRODUCTION OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION TAPE HEAD: 2 INCHES MAXIMUM FORMED CASE DIMENSIONS: LENGTH: 24 INCHES WIDTH: 18.5 INCHES HEIGHT: 18 INCHES MINIMUM FORMED CASE DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.25 INCHES HEIGHT: 3.5 INCHES MAXIMUM KNOCKDOWN CASE DIMENSIONS: LENGHT: 43 INCHES WIDTH: 33 INCHES MINIMUM KNOCKDOWN CASE DIMENSIONS: LENGTH: 13.25 INCHES WIDTH: 10.5 INCHES TOP AND BOTTOM VACUUM CUPS CONTINUOUS FEED HOPPER PHOTO EYE HAND CRANK OR MOTORIZED ADJUSTMENTS ELECTRICAL: 110 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
ADVENT | 300 |
ADVENT 300 SEMI-AUTOMATIC LABEL APPLICATOR - USED ADVENT LABELER WITH: SPEED: 12-15 JARS PER MINUTE CAP SIZE: 89 MILLIMETERS LABEL SIZE: LENGTH: 6 INCHES HEIGHT: 2.25 INCHES ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
WEXXAR BEL | 252 |
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON CASE SIZE NO TAPE HEADS INCLUDED CASE SIZE RANGE: MINIMUM: LENGTH: 8 INCHES WIDTH: 6 INCHES HEIGHT: 5 INCHES MAXIMUM: LENGTH: 22 INCHES WIDTH: 15.5 INCHES HEIGHT: 15.75 INCHES ADJUSTABLE INFEED/OUTFEED HEIGHT: MINIMUM: 25 INCHES MAXIMUM: 32 INCHES ELECTRICAL: 120 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
DELCOR | SPOT-PAK 112-SS-24 |
DELCOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER WITH PICK AND PLACE: SPEED: UP TO 25 BUNDLES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) 24 INCH SEAL BAR APERTURE DIMENSIONS WIDTH: 27 INCHES HEIGHT: 18 INCHES CONVEYOR: LENGTH: 92 INCHES WIDTH: 24.75 INCHES ARPAC TOUCH PAD CONTROLS HEAT SEAL AND TUNNEL TEMPERATURE READOUTS DIGITAL COUNTER STAINLESS STEEL CONSTRUCTION ELECTRICAL: 208-230/460 VOLTS, 3 PHASE, 60 HZ TOP LOAD CASE PACKER: SPEED: UP TO 150 PACKAGE CONTAINERS PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) CHAIN CONVEYOR: LENGTH: 60 INCHES WIDTH: 24 INCHES CLEARANCE HEIGHT: 10 INCHES CASE MAGAZINE WIDTH: 17 INCHES VARIABLE SPEED DRIVE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 90/180 VOLTS, SINGLE PHASE, 60 HZ CONVEYOR WITH LANER: BELT WIDTH: 24 INCHES BELT LENGTH: 94 INCHES GUIDE RAIL HEIGHT: 3.75 INCHES WORKING HEIGHT: 36 INCHES LANER WIDTH: 5.5 INCHES LANER HEIGHT: ADJUSTABLE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 110 VOLTS, SINGLE PHASE, 60 HZ
|
🔒 Subscribe | |
|
|
TALON MFG. | SUPRA |
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER WITH: SPEED: UP TO 300 BAGS PER MINUTE DEPENDING ON MATERIALS AND APPLICATION 8 STATION SEALING MECHANISM FILM ROLL WIDTH: 27 INCHES DISCHARGE CONVEYOR LENGTH: 54 INCHES ADJUSTABLE HEIGHT DISCHARGE, SET AT 34 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
REJVES | FOUR STATION SNAP CAPPER |
REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDTH: 3.25 INCH PRODUCTION SPEED: UP TO 45 BOTTLES PER MINUTE DEPEDING ON PRODUCT LENGTH: 27 INCHES APERTURE: 3 INCHES LANING REJECT ELECTRICAL: 480 VOLTS, 3 PHASE, 60 HERTZ, 20 AMPS ELAVATING CONVEYOR: HOPPER DIMENSIONS: LENGTH: 18.25 INCHES WIDTH: 31.25 INCHES DEPTH: 29 INCHES 20 GALLONS LIFT DIMESNIONS: FLIGHT: 6.5 INCHES WIDTH: 7.75 INCHES CLEAT HEIGHT: 1.5 INCHES DISCHARGE: 64.5 INCHES FROM GROUND INFEED: 39.5 INCHES FROM GROUND DELSA CAP UNSCRAMBLER: 45 INCH INFEED INFEED DIMENSIONS: DIAMETER: 21 INCHES FLIGHTS: 2 INCHES DEPTH: 6.5 INCHES DISCHARGE: 45 INCHES WIDTH OF FEED: 1.5 INCHES (ADJUSTABLE) ELECTRICAL: 480 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
LANGEN | B1 O/L |
LANGEN B1 O/L AUTOMATIC HORIZONTAL GLUE CARTONER - USED LANGEN HORIZONTAL GLUE CARTONER WITH CARTON SPEED 20 TO 120 CARTONS PER MINUTE (DEPENDING ON CARTON SIZE AND APPLICATION) CARTON SIZES: MINIMUM: .75 INCHES LONG X .375 INCHES WIDE X 3.75 INCHES DEEP MAXIMUM: 10 INCHES LONG X 6 INCHES WIDE X 8-1/2 INCHES DEEP STANDARD CARTON FEED SAFETY GUARDS CARTON MAGAZINE HOT-MELT ATTACHMENT WITH PLS ELECTROCAM LOADING ZONE 72 INCHES ALLEN BRADLEY MICRO CONTROLLER STEEL IT EPOXY PAINT OVERHEAD CARTON SQUARING ELECTRICAL: 460 VOLT, 60 HZ, THREE PHASE
|
🔒 Subscribe | |
|
|
ACCUTEK |
ACCUTEK STAINLESS STEEL 6 SPINDLE CAPPER - USED ACCUTEK INLINE CAPPER WITH: NUMBER OF SPINDLES: 6 CENTRIFUGAL ORIENTATION BOWL DIAMETER: SIDE GRIPPER BELT HEIGHT: 1 INCH LENGTH: 34 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: VOLTS: 110, HERTZ: 60 PHASE:1 AIR REQUIREMENTS: 60 PSI LAST RUNNING: 32 MM CAPS
|
🔒 Subscribe | ||
|
|
ACCUTEK | DOMINO A100 |
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL AUTOMATIC INK BLEED CONTROL 825 MILLEMETER CARTRIDGE WITH AUTOMATIC METER CHARACTER WIDTH AND HEIGHT ADJUSTMENT AUTO REPEAT/INVERSE/REVERSE ELECTRICAL: 110 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
MARBURG IND |
MARBURG IND HEAT SHRINK TUNNEL WITH CONVEYOR WITH: APERTURE DIMENSIONS: WIDTH: 4 INCHES HEIGHT: 4 INCHES WORKING APERTURE DIMENSIONS: WIDTH: 2.5 INCHES HEIGHT: 4 INCHES TUNNEL LENGTH: 22 INCHES CONVEYOR DIMENSIONS: LENGTH: 31 INCHES WIDTH: 10 INCHES VARIABLE HEAT TEMPERATURE OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 22 INCHES HEIGHT: 54 INCHES
|
🔒 Subscribe | ||
|
|
SHANKLIN | T-6XL |
SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" WIDE X 12" HIGH - USED SHANKLIN HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 18 INCHES HEIGHT: 12 INCHES CONVEYOR WIDTH: 11 INCHES TUNNEL LENGTH: 32 INCHES WIRE MESH CONVEYOR ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS (INCHES): 60 LONG X 39 WIDE X 73 HIGH
|
🔒 Subscribe | |
|
|
VON GAL | VAL-U-PAL |
VON GAL VAL-U-PAL LOW LEVEL PALLETIZER: OUTPUT: UP TO 10 CASES PER MINUTE CYCLE RATE: UP TO 4 CYCLES PER MINUTE MAXIMUM LIFT WEIGHT: 250 POUNDS 30 POUNDS WITH SUCTION CUPS MAXIMUM LOAD HEIGHT: 6 FEET 8 INCHES PALLET MAGAZINE PALLET DIMENSIONS: 48 INCHES X 40 INCHES 6 HEAD SUCTION PICK UP: 3 CUPS PER SECTIONS CHAIN PALLET CONVEYOR: LENGTH: 15 FEET WIDTH: 43 INCHES HEIGHT: 18 INCHES ROLLER PRODUCT CONVEYOR: LENGTH: 14 FEET WIDTH: 31 INCHES HEIGHT: 38 INCHES PNEUMATIC CASE ROTATOR DROPPED CASE DETECTOR LOW PALLET DETECTION ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3
|
🔒 Subscribe | |
|
|
APM | MFA-26-P |
APM MFA-26-P SHRINK BUNDLER AND HEAT TUNNEL - USED APM SHRINK BUNDLER WITH: FILM WIDTH: 22 INCHES DUAL LANE INFEED: 4 INCHES WIDE (EACH) SECO GUAGES SHRINK TUNNEL WIDTH: 17 INCHES HEIGHT: 16 INCHES STEEL MESH CONVEYOR DISCHARGE: 36 INCHES PUSH BUTTON CONTROLS ELECTRICAL: 480 VOLTS, 3 PH, 60 HZ STAINLESS STEEL CONTACT SURFACES
|
🔒 Subscribe | |
|
|
UNIPAK | WD-7797 |
UNIPAK WD-7797 AUTOMATIC BOTTLE DEPALLETIZER - USED PEARSON MP35 MULTI-PACKER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK CARRIER BASKETS (4) 6 PACK CARRIER BASKETS (3) 8 PACK CARRIER BASKETS CROSS FLOW INFEED: (4) 6 PACK CARRIER BASKETS CARRIER SIZES: LENGTH: 6.75-11.75 INCHES WIDTH: 4.75-5.5 INCHES DEPTH: 2.5-5.75 INCHES CASE SIZES: LENGTH: 10-21 INCHES WIDTH: 10-17 INCHES HEIGHT: 4-10 INCHES DUAL LANE BRUSH DRIVE INFEED: LENGTH: 140 INCHES WIDTH: 7.5 INCHES EACH LANE CASE INFEED: LENGTH: 73 INCHES WIDTH: 10 INCHES 90 DEGREE CASE DISCHARGE: LENGTH: 74 INCHES WIDTH: 10 INCHES PRODUCT RAM CASE STOP ALLEN BRADLEY HMI AIR REQUIREMENTS: 80 PSI ELECTRICAL REQUIREMENTS: 460 VOLT, 60 HZ, 3 PH
|
🔒 Subscribe | |
|
|
PEARSON | MP35 |
PEARSON MP35 MULTI-PACKER/STUFFER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK CARRIER BASKETS (4) 6 PACK CARRIER BASKETS (3) 8 PACK CARRIER BASKETS CROSS FLOW INFEED: (4) 6 PACK CARRIER BASKETS CARRIER SIZES: LENGTH: 6.75-11.75 INCHES WIDTH: 4.75-5.5 INCHES DEPTH: 2.5-5.75 INCHES CASE SIZES: LENGTH: 10-21 INCHES WIDTH: 10-17 INCHES HEIGHT: 4-10 INCHES DUAL LANE BRUSH DRIVE INFEED: LENGTH: 140 INCHES WIDTH: 7.5 INCHES EACH LANE CASE INFEED: LENGTH: 73 INCHES WIDTH: 10 INCHES 90 DEGREE CASE DISCHARGE: LENGTH: 74 INCHES WIDTH: 10 INCHES PRODUCT RAM CASE STOP ALLEN BRADLEY HMI AIR REQUIREMENTS: 80 PSI ELECTRICAL REQUIREMENTS: 460 VOLT, 60 HZ, 3 PH
|
🔒 Subscribe | |
|
|
INTEGRITY MACHINE SERVICES |
INTEGRITY MACHINE SERVICES FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD FOIL APPLICATION UP TO 90 TABS PER MINUTE DEPENDING ON PRODUCT TAB SIZE: 38 MILLIMETERS INCLUDES PRODUCT CONVEYOR 4.5 INCH WIDTH 58 INCH LENGTH 42 INCH INFEED/DISCHARGE HEIGHT ELECTRICAL: 240 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | ||
|
|
VISUAL | 15T |
VISUAL 15T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES MAXIMUM BLISTER DEPTH: 4 INCHES INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES PRECISION TIMER AND TEMPERATURE PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES
|
🔒 Subscribe | |
|
|
ZED INDUSTRIES | 15 T |
ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES MAXIMUM BLISTER DEPTH: 4 INCHES INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES PRECISION TIMER AND TEMPERATURE PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES
|
🔒 Subscribe | |
|
|
AVERY DENNISON | TDI SHORT TAG THERMAL PRINTER |
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM PRINT WIDTH: 128 MILLIMETERS TAG DIMENSIONS: MAXIMUM: LENGTH: 330 MILLIMETERS WIDTH: 154 MILLIMETERS MINIMUM: LENGTH: 50 MILLIMETERS WIDTH: 30 MILLIMETERS FOIL ROLL DIAMETER: OUTER DIAMETER: 90 MILLIMETERS INNER CORE: 1 INCH MAXIMUM FOIL LENGTH: 600 METERS MAXIMUM STACKING HEIGHT: 150 MILLIMETERS PUSH BUTTON CONTROLS STAINLESS STEEL EXTERIOR ELECTRICAL REQUIREMENTS: 115/230-240 VOLTS, 50/60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
ZED INDUSTRIES | 15 T |
ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES MAXIMUM BLISTER DEPTH: 4 INCHES INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES PRECISION TIMER AND TEMPERATURE PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES
|
🔒 Subscribe | |
|
|
AXON | EZ-A1 |
AXON EZ-A1 STAINLESS STEEL NECK BANDER WITH: PRODUCTION OUTPUT: UP TO 40 CONTAINERS PER MINUTE DEPENDING ON APPLICATION PREVIOUS FILM DIAMETERS RAN: CURRENT: 1.875 INCHES 50 MM: 1.5 INCHES 55 MM: 1.625 INCHES 46 MM: 1.125 INCHES INFEED HEIGHT: 47.75 INCHES (APPROXIMATE) PHOTO EYE SENSOR ELECTRICAL: 120 VOLTS, 60 HERTZ, 10 AMPS, 1 PHASE MOUNTED ON STAINLESS STEEL T STAND WITH CASTERS FOR MOBILITY
|
🔒 Subscribe | |
|
|
KALISH | 5404 BANDIT |
KALISH 5404 BANDIT SINGLE CHUCK CAPPER - USED KALISH 5404 BANDIT CHUCK CAPPER WITH: SINGLE CHUCK ADJUSTABLE CHUCK TORQUE ADJUSTABLE CAPPING HEIGHT VARIABLE SPEED VOLTAGE110 ELECTRICAL PHASE1PH HERTZ60HZ AMPERAGE2
|
🔒 Subscribe | |
|
|
2016 | MASSMAN | HFFS-IM1000 |
2016 MASSMAN HFFS-IM1000 FLEXIBLE POUCH PACKAGING SYSTEMMASSMAN HORIZONTAL FILL & SEAL FLEXIBLE POUCH PACKAGER. 60-70 PACKAGES PER MINUTE PREMADE OR ROLLSTOCK PRINTED FILM CURRENTLY CONFIGURED FOR 1 OZ, 2.5 OZ AND 3 OZ BAGS OF PRODUCT CAPABLE OF MAKING GUSSET BOTTOM POUCHES. DUAL LEVEL PLATFORM MADE BY STONE ENT. OF OMAHA, NE 2 LEVEL SO THAT THE VIBRATING HOPPER IS ON A SEPARATE LEVEL AND PLATFORM FROM THE SCALE TO ISOLATE THE MOVEMENT OF WORKER AND VIBRATING HOPPER. LARGE MAIN LEVEL TO ALLOW FOR CLEANING OF THE SCALE EQUIPMENT ON THE PLATFORM VERSUS REMOVING TO GROUND LEVEL. VC999 HIGH SPEED MULTIHEAD WEIGHER. WASH DOWN TYPE IP66 MODEL BMT-114X1.3 HS GRAVITY FEED METAL DETECTOR INLINE BETWEEN MULTIHEAD WEIGHER AND BAGGER. ENSIGHT SOLUTIONS COLUMN LIFT USED AS AN ELEVATOR SYSTEM TO GET CARTS OF PRODUCT TO TOP LEVEL OF PLATFORM. THIS COULD BE EXCLUDED AND A CONVEYOR SYSTEM OR OTHER MEANS COULD BE USED TO FEED PRODUCT TO THE WEIGHER. LAST RUNNING: BEEF JERKY THE BELOW BAGS ARE WHAT IT IS SET UP FOR. THE ONLY MAJOR TOOLING CHANGEOVER IS SIMPLY CHANGING THE SPACING OF THE BAG GRABBING FINGERS WITH A METAL SPACER DEVICE, THEREFORE, CHANGING TO OTHER SIZES SHOULD NOT BE A PROBLEM. 2.5 OZ JERKY BAG WITH ZIPPER 6 WIDE X 8 TALL. 3.0 OZ BOTTOM GUSSET BAG. 130 MM WIDE BY 205 MM LONG. THE LENGTH IS EASILY ADJUSTABLE. 1.0 OZ SAME WIDTH AS 3.0 OZ.
|
🔒 Subscribe |
|
|
GATES | WICKET WIZARD EZ2000 |
GATES WICKET WIZARD EZ2000 AUTOMATIC BAGGER/SEALER WITH: STAINLESS STEEL CONSTRUCTION UP TO 30 BAGS PER MINUTE BAG WIDTH: 3 INCHES UP TO 15 INCHES BAG LENGTH: UP TO 21 INCHES LONG NEMA 4X - HIGH PRESSURE WASH DOWN - 12 PSI LOCKOUT/TAGOUT HAS BOTH VACUUM AND NITROGEN FLUSH CAPABILITY MACHINE OPTIONSYES VOLTAGE120 HERTZ60HZ
|
🔒 Subscribe | |
|
|
USED SACHET PACKET SEALER WITH: PACKET SIZE LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 15 INCHES HEIGHT: 42 INCHES
|
🔒 Subscribe | |||
|
|
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 15 INCHES HEIGHT: 34 INCHES
|
🔒 Subscribe | |||
|
|
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 4 INCHES WIDTH: 1.5 INCH SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 51 INCHES WIDTH: 20 INCHES HEIGHT: 46 INCHES
|
🔒 Subscribe | |||
|
|
COMPUTORQUE | AUTOMATIC CAPPING SYSTEM |
COMPUTORQUE AUTOMATIC CAPPING SYSTEM INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CAP SIZE: 24 MM VARIABLE SPEED CONTROLS CAP FEEDER DIAMETER: 24 INCHES HOPPER DIMENSIONS: LENGTH: 22 INCHES WIDTH: 13.5 INCHES DEPTH: 22 INCHES STAINLESS STEEL CONSTRUCTION ADJUSTABLE HEIGHT LEGS PNEUMATIC REQUIREMENTS: 80 PSI AT 7 CUBIC FEET PER MINUTE MOTOR: 0.5 HORSEPOWER, 1725 RPM ELECTRICAL: 110 VOLTS, 50/60 HZ
|
🔒 Subscribe | |
|
|
DIVERSIFIED |
DIVERSIFIED STEAM CAPPER WITH: CONTAINER CONVEYOR (MISSING BELT): LENGTH: 105 INCHES WIDTH: 4 INCHES INFEED/DISCHARGE HEIGHT: 35 INCHES RESINA STYLE CAP SORTER: 32 INCH DIAMETER CAP HOPPER: LENGTH: 30 INCHES WIDTH: 30 INCHES DEPTH: 20 INCHES PUSH BUTTON CONTROLS WASHDOWN IDC MOTOR ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL WRAPAROUND GLUE LABELER WITH 4 INCH WIDE X 78 INCH LONG CONVEYOR - USED WRAPAROUND GLUE LABELER WITH: SPEED CONTROLS ADJUSTABLE HEIGHT GUARD RAILS PLASTIC TABLETOP CONVEYOR: TOPPER 0.33HP MOTOR VOLTS:220/380 FREQUENCY: 50 HZ THREE PHASE DIMENSIONS: WIDTH: 4 INCHES LENGTH: 78 INCHES DELTA HMI (4) LOCKABLE WHEELS ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE LAST RAN 2 INCH X 7 INCH BOTTLES
|
🔒 Subscribe |
MISC
USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEE...
Hammer Price:
🔒
GONGDA
PACKAGING EQUIPMENT
GONGDA DRYING, FILLING, CAPPING, AND LABELING LINE - USED GONGDA BEVERAGE LINE WITH: FILLER/CAPPER: ...
Hammer Price:
🔒
UNIPAC SILVER TUBE FILLER
PACKAGING EQUIPMENT
UNIPAC SILVER TUBE FILLER WITH: PRODUCTION SPEED: UP TO 70 TUBES PER MINUTE TUBE SIZE RANGE: MINIMUM...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED STAINLESS STEEL TUBE FILLER WITH: NOZZLE DIAMETER: 1/8 INCH PUSH BUTTON CONTROLS ALLEN BRADLEY ...
Hammer Price:
🔒
VOLPAK S-200-D
PACKAGING EQUIPMENT
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETER...
Hammer Price:
🔒
TRIANGLE L 60
PACKAGING EQUIPMENT
TRIANGLE L 60 VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW LENGT...
Hammer Price:
🔒
NORDENMATIC 700
PACKAGING EQUIPMENT
NORDENMATIC 700 AUTOMATIC TUBE FILLER AND SEALER WITH: FILL RANGE: MINIMUM: 1 MILLILITER MAXIMUM: 60...
Hammer Price:
🔒
UBE 1216
PACKAGING EQUIPMENT
UBE 1216 BREAD BAGGER WITH: SEMI-AUTOMATIC BAGGER, OPERATOR LOADS PRODUCT ONTO THE INFEED CONVEYOR A...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
TELE-SONIC SB-180V
PACKAGING EQUIPMENT
TELE-SONIC SB-180V VERTICAL FORM FILL AND SEAL - USED TELE-SONIC VERTICAL FORM FILL AND SEAL WITH: O...
Hammer Price:
🔒
MATRIX
PACKAGING EQUIPMENT
MATRIX VERTICAL FORM FILL AND SEAL BAGGER - USED MATRIX BAGGER WITH: PRODUCTION SPEED: 40 BAGS PER M...
Hammer Price:
🔒
FUJI FORMOST FW-3400
PACKAGING EQUIPMENT
FUJI FORMOST FW-3400 HORIZONTAL FORM FILL AND SEAL - USED FUJI FORMOST HORIZONTAL FLOW WRAPPER WITH:...
Hammer Price:
🔒
OYSTAR TFS 10
PACKAGING EQUIPMENT
OYSTAR TFS 10 TUBE FILLER AND SEALER WITH: INFEED: 75.5 INCHES HIGH INFEED TANK: GALLONS: 10 DIAMETE...
Hammer Price:
🔒
HAYSSEN ULTIMA
PACKAGING EQUIPMENT
HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER. OUTPUT: UP TO 100 BAGS PER MINUTE. MINIMUM BAG DI...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
CLIMAX DP4-1/LD
PACKAGING EQUIPMENT
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONS...
Hammer Price:
🔒
LOVESHAW SP304
PACKAGING EQUIPMENT
LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEAD...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
MARQ HPE412-3(RH)DL
PACKAGING EQUIPMENT
MARQ HPE412-3(RH)DL TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ TAPE BOTTOM SEAL CASE ERECTOR WITH: PR...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
ADVENT 300
PACKAGING EQUIPMENT
ADVENT 300 SEMI-AUTOMATIC LABEL APPLICATOR - USED ADVENT LABELER WITH: SPEED: 12-15 JARS PER MINUTE ...
Hammer Price:
🔒
WEXXAR BEL 252
PACKAGING EQUIPMENT
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON...
Hammer Price:
🔒
DELCOR SPOT-PAK 112-SS-24
PACKAGING EQUIPMENT
DELCOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER WITH PICK AND PLACE: SPEED: UP TO...
Hammer Price:
🔒
TALON MFG. SUPRA
PACKAGING EQUIPMENT
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER WITH: SPEED: UP TO 300 BAGS PER MINUTE DEPENDING ON MAT...
Hammer Price:
🔒
REJVES FOUR STATION SNAP CAPPER
PACKAGING EQUIPMENT
REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDT...
Hammer Price:
🔒
LANGEN B1 O/L
PACKAGING EQUIPMENT
LANGEN B1 O/L AUTOMATIC HORIZONTAL GLUE CARTONER - USED LANGEN HORIZONTAL GLUE CARTONER WITH CARTON ...
Hammer Price:
🔒
ACCUTEK
PACKAGING EQUIPMENT
ACCUTEK STAINLESS STEEL 6 SPINDLE CAPPER - USED ACCUTEK INLINE CAPPER WITH: NUMBER OF SPINDLES: 6 CE...
Hammer Price:
🔒
ACCUTEK DOMINO A100
COMMERCIAL PRINTING & BINDERY EQUIPMENT
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL ...
Hammer Price:
🔒
MARBURG IND
PACKAGING EQUIPMENT
MARBURG IND HEAT SHRINK TUNNEL WITH CONVEYOR WITH: APERTURE DIMENSIONS: WIDTH: 4 INCHES HEIGHT: 4 IN...
Hammer Price:
🔒
SHANKLIN T-6XL
PACKAGING EQUIPMENT
SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" WIDE X 12" HIGH - USED SHANKLIN HEAT SHRINK TUNNEL WITH: APERT...
Hammer Price:
🔒
VON GAL VAL-U-PAL
PACKAGING EQUIPMENT
VON GAL VAL-U-PAL LOW LEVEL PALLETIZER: OUTPUT: UP TO 10 CASES PER MINUTE CYCLE RATE: UP TO 4 CYCLES...
Hammer Price:
🔒
APM MFA-26-P
PACKAGING EQUIPMENT
APM MFA-26-P SHRINK BUNDLER AND HEAT TUNNEL - USED APM SHRINK BUNDLER WITH: FILM WIDTH: 22 INCHES DU...
Hammer Price:
🔒
UNIPAK WD-7797
PACKAGING EQUIPMENT
UNIPAK WD-7797 AUTOMATIC BOTTLE DEPALLETIZER - USED PEARSON MP35 MULTI-PACKER WITH: OUTPUT: UP TO 30...
Hammer Price:
🔒
PEARSON MP35
PACKAGING EQUIPMENT
PEARSON MP35 MULTI-PACKER/STUFFER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK...
Hammer Price:
🔒
INTEGRITY MACHINE SERVICES
PACKAGING EQUIPMENT
INTEGRITY MACHINE SERVICES FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD F...
Hammer Price:
🔒
VISUAL 15T
PACKAGING EQUIPMENT
VISUAL 15T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEAL...
Hammer Price:
🔒
ZED INDUSTRIES 15 T
PACKAGING EQUIPMENT
ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICA...
Hammer Price:
🔒
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER
COMMERCIAL PRINTING & BINDERY EQUIPMENT
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM P...
Hammer Price:
🔒
ZED INDUSTRIES 15 T
PACKAGING EQUIPMENT
ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICA...
Hammer Price:
🔒
AXON EZ-A1
PACKAGING EQUIPMENT
AXON EZ-A1 STAINLESS STEEL NECK BANDER WITH: PRODUCTION OUTPUT: UP TO 40 CONTAINERS PER MINUTE DEPEN...
Hammer Price:
🔒
KALISH 5404 BANDIT
PACKAGING EQUIPMENT
KALISH 5404 BANDIT SINGLE CHUCK CAPPER - USED KALISH 5404 BANDIT CHUCK CAPPER WITH: SINGLE CHUCK ADJ...
Hammer Price:
🔒
2016 MASSMAN HFFS-IM1000
PACKAGING EQUIPMENT
2016 MASSMAN HFFS-IM1000 FLEXIBLE POUCH PACKAGING SYSTEMMASSMAN HORIZONTAL FILL & SEAL FLEXIBLE POUC...
Hammer Price:
🔒
GATES WICKET WIZARD EZ2000
PACKAGING EQUIPMENT
GATES WICKET WIZARD EZ2000 AUTOMATIC BAGGER/SEALER WITH: STAINLESS STEEL CONSTRUCTION UP TO 30 BAGS ...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED SACHET PACKET SEALER WITH: PACKET SIZE LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 IN...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 I...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 4 INCHES WIDTH: 1.5 INCH SEAL BAR LENGTH: 4 INC...
Hammer Price:
🔒
COMPUTORQUE AUTOMATIC CAPPING SYSTEM
PACKAGING EQUIPMENT
COMPUTORQUE AUTOMATIC CAPPING SYSTEM INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CA...
Hammer Price:
🔒
DIVERSIFIED
PACKAGING EQUIPMENT
DIVERSIFIED STEAM CAPPER WITH: CONTAINER CONVEYOR (MISSING BELT): LENGTH: 105 INCHES WIDTH: 4 INCHES...
Hammer Price:
🔒
PACKAGING EQUIPMENT
STAINLESS STEEL WRAPAROUND GLUE LABELER WITH 4 INCH WIDE X 78 INCH LONG CONVEYOR - USED WRAPAROUND G...
Hammer Price:
🔒