Monthly Machinery Auction Surplus from Manufacturers Plants

2003 MAZAK NEXUS 510C CNC VERTICAL MACHINING CENTER *NO CHIP CONVEYOR *SPINDLE HAS A MINOR LEAK SPECS PULLED FROM ONLINE SOURCE, PLEASE VERIFY: MODEL ........................................ VCN-410/510 YEAR ......................................... 2003 TABLE SIZE ................................... 51.18 X 21.65 NUMBER OF T-SLOTS ............................ (3) MAX TABLE LOAD CAPACITY....................... 2,640 (EVENLY DISTRIBUTED) X AXIS TRAVEL ................................ 41.34 Y AXIS TRAVEL ................................ 20.08 Z AXIS TRAVEL ................................ 20.08 DISTANCE (TABLE TOP TO SPINDLE NOSE) ......... 5.90"-25.98 DISTANCE (COLUMN SURFACE TO SPINDLE CENTER) .. 22.67 MAX SPINDLE SPEED ............................ 12,000 R.P.M. SPINDLE TAPER ................................ CAT 40 SIDE MOUNT TOOL CHANGER CPACITY .............. 30 TOOLS MAX TOOL DIAMETER ............................ 3.15 MAX TOOL LENGTH .............................. 13.78 MAX TOOL WEIGHT .............................. 17.64 LBS S/N: 162470

2016 INGERSOLL RAND R75I-TAS-A118 AIR COMPRESSOR 100HP. VOLTAGE: 460V PHASE: 3/60 HZ REFRIGERANT TYPE: R-404A REFRIGERANT CHARGE: 3.97LB RUNNING HOURS: 32,805. *NOTED ISSUE FROM OWNER: THIS UNIT WAS REVIEWED BY IR AND IT WAS FOUND THE MOTOR HAD A DEAD SHORT.. (NEEDS TO BE REPLACED OR THE WINDINGS REWOUND)... OTHER THAN THAT, ALL SHOULD BE GOOD!

10 HP KAESER SM 10 AIRCENTER ROTARY SCREW AIR COMPRESSOR

2003 HURCO VMX24S CNC VERTICAL MACHINING CENTER SPECIFICATIONS BELOW ARE FOR A VMX24, I WAS TOLD THE VMX24S MEANS ONLY THAT IS IS 15000 TPM RATHER THAN STANDARD 10000 RPM (PLEASE VERIFY): X 24" Y 20" Z 24" RPM 15,000 CAT-40 APPROXIMATE WEIGHT: 10,225 (LBS) OVERALL DIMENSIONS: 8' X 9' X 9' TO 10' TALL

CLAUSING METOSA CNC LATHE RECENTLY REMOVED FROM TECHNICAL SCHOOL, REPORTED IN GOOD WORKING CONDITION!

1999 HURCO BMC3017 CNC VERTICAL MACHINING CENTER SPECIFICATIONS (ONLINE SOURCE - PLEASE VERIFY): CONTROL ULTIMAX DUAL TABLE SIZE 40" X 16" MAX TABLE LOAD 1,100 LBS X AXIS TRAVEL 30" Y AXIS TRAVEL 18" Z AXIS TRAVEL 24" SPINDLE NOSE TO TABLE 7.8" 28.6" SPINDLE SPEED 8,000 RPM SPINDLE MOTOR 15 HP SPINDLE TAPER CAT40 RAPID TRAVERSE RATE 945 IPM TOOL STATIONS 24 ATC CAROUSEL EQUIPPED WITH: HURCO ULTIMAX DUAL CONTROL APPROXIMATE WEIGHT: 10,000LBS. OVERALL DIMENSIONS: 8' X 10' X 9' TO 10' TALL

1997 HARDINGE COBRA C65 CNC LATHE FANUC CONTROL - 10" CHUCK INCLUDED (AN ADDITIONAL CHUCK IS INCLUDED BUT WILL NEED TO BE REFURBISHED PER OWNER) 12 STATION TURRET CONTROL: FANUC 21I-T BAR CAPACITY: 2.559 INCH AXIS: 2 POWER: 7.5 HP MAX RPM: 4500 RPM TURNING DIA:10.5 INCH SWING: 21 INCH MACHINING LENGTH: 31 INCH 125INCH X 72INCH X 76INCH WEIGHT9300 LBS *NOTE - TAIL STOCK DOES NOT PROPERLY BUILD PRESSURE AND BASICALLY IS NOT WORKING. OTHER THAN THAT, MACHINE RUNS FINE.

RAMCO DW-25RR BELT SANDER TWIN MOTOR DRIVE 460 V / 3 PH / 60 HZ S/N: 520

1998 MAZAK QUICK TURN 20 CNC TURNING CENTER S/N: 137516 BAR CAPACITY: 2.75" SPINDLE SPEED: 4,000 RPM SPINDLE MOTOR: 20 HP X AXIS TRAVEL: 7.125" Z AXIS TRAVEL: 20.125" RAPID RATE Z AXIS: 1,300 IPM TURRET TOOLS: 8 STATION RAPID RATE X AXIS: 1,200 IPM MAX TURNING DIA: 11.81" MAX TURNING LENGTH: 17.5" MAX SWING: 17.32" DIMENSIONS: 105" X 68.5" X 73.1" WEIGHT: 9,600 LBS

SUNNEN MBB-1660E HORIZONTAL PRECISION HONING MACHINE 1/2 HP MOTOR 230/460 VAC S/N: 85902

SUNNEN HONE TOOLING & CABINET

ONAN 60ENA 60 KW STANDBY NATURAL GAS GENERATOR GAS POWERED 3 PHASE RPM 1,800 HOURS: 530 REMOVED FROM WORKING ORDER OVERALL DIMS: 90 LONG 35 WIDE 86 TALL

2 SKIDS (71 BELTS) NEW IN BOX 25"X60" WIDE SANDING BELTS, 60 & 40 GRIT. YOU ARE GETTING 50 PCS OF 60 GRIT BELTS NEW IN BOX. YOU ARE GETTING 21 PIECES OF 40 GRIT BELTS NEW IN BOX. ** COULD BE PLUS OR MINUS **

2020 PALMARY OCD-3260 CYLINDRICAL GRINDER 2 AXIS FANUC OI-TF CONTROLLER W/CONVERSATIONAL SOFTWARE SEMI-ENCLOSED SPLASH GAURD OPTIONS: CAM LOCKED TYPE DRIVE DOG FULLY ENCLOSED SPLASH GUARD FOR, OCD-3260 GAP CONTROL MAGNETIC COOLANT SEPARATOR - 80 L/MIN. PAPER FILTER SYSTEM - 80 L/MIN. AUTO DOOR HYDRAULIC TAILSTOCK TOUCH PROBE ID GRINDING ATTACHMENT - HINGED TYPE

1996 MORI SEIKI MH-63 CNC HORIZONTAL MACHINING CENTER HIGH PRESSURE COOLANT CAPACITY: X-AXIS TRAVEL ......................... 39.36" Y-AXIS TRAVEL ......................... 41.3" Z-AXIS TRAVEL ......................... 36.20" NUMBER OF PALLETS ..................... 2 APC PALLET SIZE ........................... 24.8" X 24.8" PALLET LOAD CAPACITY .................. 3300 LBS PALLET INDEXING ....................... 1 DEGREE SPINDLE SPEEDS ........................ 60-6000 RPM SPINDLE MOTOR ......................... 40 HP SPINDLE TAPER ......................... #50 RAPID TRAVERSE RATE, XYZ .............. 787 IPM AUTOMATIC TOOL CHANGER ................ 60 ATC MAX. TOOL WEIGHT ...................... 66 LBS MAX. TOOL LENGTH ...................... 19.67" APPROX. DIMENSIONS .................... 206" X 126" X 127" APPROX. WEIGHT ........................ 41,800 LBS

TORIT DMC-D1 MIST COLLECTOR REMOVED FROM SERVICE IN GOOD WORKING CONDITION

2013 ZEISS ACCURA BRIDGE TYPE MEASURING MACHINE ZEISS VAST GOLD MASS (MULTI APPLICATIONSENSOR SYSTEM) GRANITE TABLE: 95-1/4" X 69" X 16" THICK 56-1/2" BETWEEN COLUMNS 48" UNDER RAIL FOR HEIGHT W/ ACCURA - MASS /B 115V TCC2 SERIAL# AK018642 MANUFACTURED: 2013 / REV 01 ZEISS JOYSTICK CONTROLLER UNIT

2015 NTC N470H-865S 5 AXIS HORIZONTAL MACHINING CENTER S/N: TNA32241 MANUFACTURED: 2015 MODEL# FTL-1452CH-C EQUIPPED WITH: FANUC 35I CONTROLLER, MODEL B

2013 ZEISS ACCURA - MASS 12/18/10 BRIDGE TYPE MEASURING MACHINE / RENISHAW RETROFIT GRANITE TABLE: 95-1/4" X 69" X 16" THICK 56-1/2" BETWEEN COLUMNS 48" UNDER RAIL FOR HEIGHT W/ RENISHAW REVO / RENSCAN 5 / RSP2 PROBE AND HEAD UNIT MEASURING RANGE X/Y/Z / 12/18/10 THIS IS A RENISHAW RETROFIT: SERIAL# 740L93 W/ RENISHAW UNIVERSAL CMM CONTROLLER UCC2-2 ALSO W/ RENISHAW SERVO POWER AMPLIFIER SPA2-2 AND RENISHAW MCU5 JOYSTICK CONTROLLER DATE OF LAST CALIBRATION: JULY 23, 2020 FULL ENCLOSURE IF WANTED: (ADDITIONAL COST FOR DUE CARE REMOVAL)

2015 NTC N470H-865S 5 AXIS HORIZONTAL MACHINING CENTER SERIAL# TNA32267 MANUFACTURED: 2015 MODEL# FTL-1452CH-B EQUIPPED WITH: FANUC 35I CONTROLLER, MODEL B DIMPLEX THERMAL SOLUTIONS CHILLER UNIT MODEL# JH2000-BP-SO-AT-M MFG'D: JUNE / 2014

TINIUS OLSEN H25KS TENSILE TESTING MACHINE

HAMMOND DK-855-B DUST COLLECTOR 460V / 3 PH / 60 HZ S/N: 14925

2 TON DEMAG FREESTANDING BRIDGE CRANE OVERRIDING APP 15' BRIDGE APP 40' RUNWAY APP 10' TALL

LARGE AIR RECEIVER TANK UNIT IS APP 3' DIAMETER AND STANDS APP 20' TALL

TREE JOURNEYMAN 210 3-AXIS CNC KNEE MILL. TABLE TRAVEL 27" (X); SADDLE TRAVEL 14" (Y); QUILL TRAVEL 5" (Z); MANUAL KNEE TRAVEL 15.75" 5HP 50 TO 4200RPM, NEW UPDATED CNC, MACH3 O/S, NOVUSUN NVCM CONTROLLER, DELL WITH I5 PC, CLICK PLC, NEW CLOSED LOOP MEMA42 SERVOS X3, RUNS GCODE AND MANUAL MODE, FULL CONTROLS ON CONSOLE AND REMOTE PENDANT. 240VAC 3-PHASE, KWIK CHANGE 200 TOOL HOLDERS

5 TON SHAWBOX FREESTANDING BRIDGE CRANE APP 30' BRIDGE APP 30' TALL - BEAMS WON'T QUITE BE 30' BECAUSE THEY NEED TO BE CUT IN ORDER TO REMOVE.WILL NEED TO ADD BASE PLATE 60' RAIL

CLARK 725C DOUBLE END BUFFER / POLISHER W/ BACK STANDS TYPE# 5U9A4B 5 HP DRIVE MOTOR W/ GUARDING AND BACK STANDS 3" WIDE