Online Timed Cannabis Hemp Equipment MultiLocation Consignment Auction Powered by A2C

ATG VAPE FILLING SYSTEM W/ (3) ATG ROBOTCAPRL-300 VOLUMETRIC FILLERS & (3) SPX FLOW MIXERS. (3) ATG ROBOTCAPRL-300 VOLUMETRIC FILLERS - UP TO 5 ML FOR MAX EFFICIENCY. UTILIZES BACKPRESSURE, HEAT AND VOLUMETRIC DISPLACEMENT TO GUARANTEE +/- 2% FILLING ACCURACY. (3) ATG DOSING PUMP HEADS - MODEL CF600. (3) SPX FLOW MIXERS - MODEL 61010-1-12 (3RD EDITION). ALL BELOW VESSELS INCLUDE HEATER OPTION. (4) 1 GAL STOCK TANK. (2) 1 L STOCK TANK. (1) 3 GAL STOCK TANK.

JORESTECH TUN-1540 TAMPER SEAL HEAT SHRINK TUNNEL WITH CONVEYOR. SPECS & FEATURES: -TUNNEL ADJUSTS TO A WIDE RANGE OF CONTAINERS, AND INCLUDES SPEED AND HEIGHT-ADJUSTABLE STAINLESS STEEL FLAT-TOP CONVEYOR. -SIMPLE TO USE MINIMAL OPERATOR TRAINING ALL-METAL CONSTRUCTION WITH CORROSION-PROOF PLASTIC BASE -QUICK WARM-UP TIME ADJUSTABLE SPEED CONVEYOR EQUIPPED WITH SIDE GUIDES. -TUNNEL PATH DIMENSIONS CHANGE HEIGHT TO 3.5 INCHES WILL ACCEPT BOTTLES FROM 4" (100 MM ) TO 16" (405 MM) HIGH -MAXIMUM CONTAINER WIDTH DIAMETER: 5 12 INCHES (140 MM) -CONVEYOR HEIGHT FROM FLOOR ADJUSTABLE FROM 29.6" TO 36.6" (751 - 929 MM) -CONVEYOR SPEED (0-15 M/MIN) -HEAT TEMPERATURE CAN BE CONTROLLED FROM (0 TO 400 C). -INCLUDES SHRINK TUNNEL CONTROL PANEL W/ TEMPERATURE CONTROLLER (0 TO 400 DEGREES C). -INCLUDES ELECTRONIC CONVEYOR: SPEED CONTROLLER. EMERGENCY STOP BUTTON FLAT TOP STAINLESS STEEL CONVEYOR

CASCADE SCIENCES CDO-28 DRY & DECARB OVENS SPECS & FEATURES FRO BOTH UNITS: -DRY & DECARB OVEN -VOLUME: 28 CUBIC FT. (793 CUBIC LITERS) -31.5W X 60.5H X 26D -AMBIENT +2.2OC (36 F) TO 148OC (300F) -HUMIDITY SENSOR -6 FDA COMPLIANT MESH BAGS, -220V HARDWIRE, NRTL

JULABO CORIO CD-601F REFRIGERATED / HEATING CIRCULATOR. MODEL 601F W/ CORIO CD TEMPERATURE CONTROLLER. SPECS & FEATURES: -WORKING TEMPERATURE RANGE: -35 TO 150 DEGREES C -TEMPERATURE STABILITY: 0.03 DEGREES C -HEATING CAPACITY: ***SEE CHART WITH RANGES IN LAST PICTURE -REFRIGERANT: R449A -PUMP CAPACITY FLOW RATE: 16 LITERS/MIN -PUMP CAPACITY FLOW PRESSURE: 4.8 PSI -USABLE BATH OPENING: (W X L / D)8.7 X 5.9 / 7.9 IN.

GREEN BROZ 215 STANDARD DRY TRIM DRY TRIMMER SPECS & FEATURES: -CAN GENTLY PROCESS 2-4 POUNDS OF MATERIAL PER HOUR -SPEED: 20 RPM -BLADES ARE MADE OUT OF FOOD GRADE STAINLESS STEEL. -MOTOR IS WHISPER QUIET AND ONLY USES 25 WATTS OF POWER. -BLADE ROTATES AT 20 REVOLUTIONS A MINUTE. 30-MINUTE TIMER. -HOUSING IS MADE OUT OF HDPE, WHICH IS THE SAME MATERIAL AS CUTTING BOARDS, SO IT WONT HOLD MICROBIAL OR BACTERIAL GROWTH. -FORWARD AND REVERSE SWITCH. -WEIGHT: 50 LBS. DIMENSIONS: 18.125W X 25L X 21.5H -POWER: 115V 60HZ AT 25W .4 AMP

ACROSS INTERNATIONAL SE-53 ROTARY EVAPORATOR SET UP SPECS & FEATURES: -CAPACITY: 5.28 GALLON (20 LITERS OR 0.7 CU FT) -MAXIMUM LOAD: NOT TO EXCEED 60% OF THE FLASKS CAPACITY -SEALING FLANGE: 4.9" DIAMETER ROTATION SPEED: 10 TO 130 RPM -EVAPORATING SPEED: 1 GALLON/HOUR (WATER), 2 GALLON/HOUR (ALCOHOL) -STAINLESS STEEL CONSTRUCTION LOT INCLUDES: -FILTER SYSTEM -2ND FILTER SYSTEM (PLASTIC) -FILTER CLOTHS -4 HEADED DIAPHRAM PUMP/WELCH -ULTRA LOW FREEZER (-85 DEGREES) GLACIER - 35 191130235 -RECIRCULATING CHILLER C30-30-20L 200 30077 -HEATED CIRCULATOR H200-15 750 19223 -JACKETED GLASS REACTOR R20 19070182 -INSULATED JACKET MANUALS INCLUDED ETHANOL INCLUDED

ACROSS INTERNATIONAL SE-53 ROTARY EVAPORATOR SET UP SPECS & FEATURES: -CAPACITY: 5.28 GALLON (20 LITERS OR 0.7 CU FT) -MAXIMUM LOAD: NOT TO EXCEED 60% OF THE FLASKS CAPACITY -SEALING FLANGE: 4.9" DIAMETER ROTATION SPEED: 10 TO 130 RPM -EVAPORATING SPEED: 1 GALLON/HOUR (WATER), 2 GALLON/HOUR (ALCOHOL) -STAINLESS STEEL CONSTRUCTION LOT INCLUDES: - JULABO FP 89 HEATER CIRCULATOR W/ JULIO HL TEMPERATURE CONTROL UNIT -ACROSS INTERNATIONAL RECIRCULATING CHILLER MODEL C30-30-20L -WELCH VACUUM PUMP MODEL 2052C-02 W/ DIGIVAC PRESSURE CONTROLLER -ASSORTED FITTINGS AND SPARE PARTS (PICTURED)

POPE 6" WIPED FILM STAINLESS STEEL MOLECULAR STILL MODEL 6" 40403-01-SS SPECS & FEATURES: -DIAMETER: 6" -SURFACE AREA: 2.35 SQFT -TYPICAL FLOW RATE: 2-4 KG PER HOUR VVARIABLE SPEED DRIVE MECHANISM (WETTED PARTS 316 S.S.), SELF-SUPPORTING STILL STAND, S.S. STILL BODY -120 VAC, 50/60 HZ LOT INCLUDES: - MAIN APPARATUS: POPE 6" SS STILL - (1) METAL BAND HEATER W DIGITAL TEMP CONTROLLER - DISTILLATE AND RESIDUE ADAPTERS FOR USE WITH (2) INCLUDED POSITIVE DISPLACE GEAR PUMPS TO ALLOW PUMPING OF RESIDUE AND DISTILLATE WITHOUT THE NEED OF CHANGING FLASKS. RUN CONTINUOUSLY AND ONLY FILL THE FEED. - (1) EXTERNAL CONDENSER - (4) HEAT CONTROLLERS - (3) HEAT TAPES FOR FEED - (1) J THERMO SILICONE RUBBER HEATER - (1) VACUUM PUMP: 0.05 TORR W/ PIRANI VACUUM GAUGE - (1) MANUAL BLEED VALVE - (1) JULABO 600F 1 KW TEMPERED WATER CIRUCLATOR - (1) POLY SCIENCE IMMERSION CHILLER GLASS COLD TRAP (450 CHILLER KIT) - (1) POSTIVE DISPLACEMENT GEAR PUMP FOR SUPPLYING FEED TO UNIT - ASSORTED GLASSWEAR

CHEMTECH KDT-10 LABORATORY SHORT PATH DISTILLATION SYSTEM. SPECS & FEATURES: -SUITABLE FOR FEED RATES FROM 2.0 TO 15.0 KG/HOUR. LOT INCLUDES: -MAIN APPARATUS -CONDENSER CIRCULATOR, COLD TRAP CIRCULATOR, FLASK ASSEMBLY -HST BOOSTER, FEED MOTOR, BRACKET ASSEMBLY, COUPLER -COLD TRAP, TURBO ASSEMBLY, VACUUM SENSOR -RIGHT ANGLE VALVE ASSEMBLY, CLAW CLAMPS -RESDIUE DISCHARGE MOTOR, DISTILLATE DISCHARGE MOTOR, -LOWER EVAPORATOR & EVAPORATOR CIRCULATOR -FEED PUMP, WIPER MOTOR, AND VACUUM PUMP

ACROSS INTERNATIONAL SOLVENTVAP 50L ROTARY EVAPORATOR W/ MOTORIZED LIFT. SOLVENTVAP COMES WITH J-KEM SCIENTIFIC DIGITIAL VACUUM REGULATOR. -FLOOR MOUNTED WALK-IN GENNIE 600 SL FUME HOOD: HOUSES THE AI SOLVENTVAP W/ INLETS FOR CONNECTIONS (PICTURED) -WINTERIZATION SKID: INCLUDES 13 GALLON VESSEL DRAIN DROID UNIT. MOUNTED ON CASTERS. -TAEEVO TECH MINI 03 CHILLER: SEE TAG FOR SPECS -(2) TOTAL WELCH VACUUM PUMPS. MODEL 2052B-01. ONE FOR THE WINTERIZARION SKID AND ONE FOR THE CHILLER

POPE 6" WIPED FILM STAINLESS STEEL MOLECULAR STILL. MODEL 6" 40403-01-SS SPECS & FEATURES: -DIAMETER: 6" -SURFACE AREA: 2.35 SQFT -TYPICAL FLOW RATE: 2-4 KG PER HOUR -SUCCESSFULLY SEPARATES VOLATILE FROM LESS VOLATILE COMPONENTS FOR OILS, FATS, CHEMICALS, POLYMERS, NUTRACEUTICALS, FRAGRANCES, ETC., WITH A GENTLE PROCESS UTILIZING THE THIN-FILM WIPING ACTION OF FEED LIQUID THROUGH A HEATED CYLINDRICAL VACUUM CHAMBER WITH HIGH VACUUM (I.E. VACUUM DISTILLATION/EVAPORATION). LOT INCLUDES: - MAIN APPARATUS: POPE 6" SS STILL - (1) METAL BAND HEATER W DIGITAL TEMP CONTROLLER -DISTILLATE AND RESIDUE ADAPTERS FOR USE WITH (2) INCLUDED POSITIVE DISPLACE GEAR PUMPS TO ALLOW PUMPING OF RESIDUE AND DISTILLATE WITHOUT THE NEED OF CHANGING FLASKS. RUN CONTINUOUSLY AND ONLY FILL THE FEED. - (1) EXTERNAL CONDENSER - (4) HEAT CONTROLLERS - (3) HEAT TAPES FOR FEED - (1) STAINLESS STEEL FEED HOPPER - (1) POSITIVE DISPLACEMENT GEAR PUMP FOR SUPPLYING FEED TO UNIT - (1) J THERMO SILICONE RUBBER HEATER - (1) VACUUM PUMP: 0.05 TORR W/ PIRANI VACUUM GAUGE - (1) MANUAL BLEED VALVE - MISC EXTRA GLASS WARE

LAB SOCIETY LS-MS-5SB SHORT PATH DISTILLATION SYSTEM W/G2 SHORT PATH FULL BORE DISTILLATION KIT: 5 L - DUAL INLINE COLD TRAP KIT. MODEL LS-CTK-2HE - (4) 300 ML ROUND BOTTOM COLLECTION FLASKS - (1) 150 ML ROUND BOTTOM COLLECTION FLASK - (1) 1000 ML ROUND BOTTOM COLLECTION FLASK - STIR CONTROLLER, VACUUM PRESSURE MONITOR, TEMP MONITOR W/ TEMP CONTROL

TRIMMINATOR TRP COMMERCIAL ROSIN PRESS W/ ELECTRIC/HYDRAULIC PUMP. SPECS & FEATURES: -3 PLATENS, 6 PRECISION HEATING ELEMENTS -25 TONS OF FORCE -UTILIZES DRIP TECHNOLOGY ALLOWING THE ROSIN TO QUICKLY DROP TO A COOL SURFACE WITH THE SEAMLESS ROTATION OF THE PLATENS -ELECTRICAL: 120 VOLT / 20 AMPS. LOT INCLUDES: -MAIN APPARATUS -ELECTRIC/HYDRAULIC PUMP & PUMP KIT -100 ROSIN BAGS MADE BY THE PRESS CLUB

PURASOL PE-50: SYSTEM CAN PROCESS 50-75 LBS OF BIOMASS EVERY 1 1/2-2 HOURS. OIL COMES OUT AS AN FULL SPECTRUM OIL WITH NO SOLVENT IN THE OIL. NONFLAMMABLE SOLVENT. LOW PRESSURE FROM 60-150 PSI RUNNING PRESSURE ON THE COMPLETE SYSTEM. SOLVENT ACCUMULATOR MADE FROM 14 THICK STAINLESS-STEEL MATERIAL. HOLDS 5,000 LBS OF SOLVENT. ELECTRICAL: 250 AMP 3 POLE CIRCUIT BREAKER FOR INCOMING 220 VAC 3 PHASE. SOAK/REACTOR TANK: WILL HOLD UP TO 75 PLUS POUNDS OF BIOMASS. MADE FROM 14 THICK STAINLESS STEEL WITH A 2 THICK STAINLESS-STEEL LID. HEATED THROUGH HEAT TAPE AND CONTROLLED THROUGH PID CLOSED LOOP CONTROLLERS (BASKET FOR THE REACTOR TANK IS 36 DIAMETER X 42 LONG). USES FILTER BAG TO HOLD THE BIOMASS. COLLECTOR TANK: WHERE THE SEPARATION OF THE SOLVENT AND THE OIL IS DONE. MADE FROM 14 THICK STAINLESS STEEL WITH A 2 THICK STAINLESS-STEEL LID. HEATED THROUGH HEAT TAPE AND CONTROLLED THROUGH PID CLOSED LOOP CONTROLLERS. ALL PIPING IS MADE FROM STAINLESS STEEL PIPE. VACUUM PUMP: USED TO PUMP DOWN ANY TANK AND COMPLETE SYSTEM. RATED AT 100 CFM FOR A DEEP VACUUM. PARKER AIR VALVE SYSTEM ETHERNET BASED. TURK PLC WITH 21 HMI SCREEN. TURK REMOTE I/O. ALL TANKS AND PIPES HAVE BOTH TEMPERATURE AND PRESSURE SENSORS. 10 HP COMPRESSOR FOR MAIN DRAW DOWN OF SOLVENT. 7 12 HP SECONDARY COMPRESSOR TO DO FINAL DRAW DOWN. ACCUMULATOR TANK W/ HAS SOLVENT LEVEL SENSOR. HEAT EXCHANGER FOR THE COLLECTOR TANK. PURASOL PE-5: SYSTEM CAN PROCESS 2.5-4 POUNDS OF BIOMASS PER TANK BATCH. R134A CLOSED LOOP SYSTEM. LOW PRESSURE FROM 60-150 PSI RUNNING PRESSURE ON THE COMPLETE SYSTEM. CLOSED LOOP SYSTEM. MACHINE IS MOUNTED ON CASTERS. ELECTRICAL: 220VAC 3 PHASE 40 AMPS OR 220 VAC SINGLE PHASE 60 AMP. ACCUMULATOR MADE FROM 3/16 THICK STAINLESS-STEEL MATERIAL. HOLDS 150 LBS OF SOLVENT. (2) REACTOR TANK THAT WILL DO 2 12-4 POUNDS OF BIOMASS PER TANK BATCH. MADE FROM 3/16 THICK STAINLESS STEEL WITH A STAINLESS-STEEL LID. HEATED THROUGH A WATER HEAT EXCHANGER CONTROLLED BY THE PLC.. BASKET FOR THE REACTOR TANK IS 10 DIAMETER X 13 LONG. USES FILTER BAG TO HOLD THE BIOMASS. COLLECTOR TANK IS WHERE THE SEPARATION OF THE SOLVENT AND THE OIL IS DONE. MADE FROM 3/16 THICK STAINLESS STEEL WITH A STAINLESS-STEEL LID. HEATED THROUGH WATER HEAT EXCHANGER CONTROLLED BY THE PLC. VACUUM PUMP TO PUMP DOWN ANY TANK AND COMPLETE SYSTEM. PARKER AIR VALVE SYSTEM ETHERNET BASED. SIEMENS PLC WITH 8 HMI SCREEN. TURK REMOTE I/O. ALL TANKS AND PIPES HAVE BOTH TEMPERATURE AND PRESSURE SENSORS. 3/4 HP COMPRESSOR FOR MAIN DRAW DOWN OF SOLVENT. ACCUMULATOR HAS SOLVENT LEVEL SIGHT GLASS. HEAT EXCHANGER FOR THE COLLECTOR TANK. 50 AMP 3 POLE CIRCUIT BREAKER FOR INCOMING 220 VAC 3 PHASE POWER.

NANO PURIFICATION NDL 110 F HEATLESS MODULAR DESICCANT AIR DRYER D2 SERIES. SPECS & FEATURES: -CFM (CAPACITY): 106 SCFM @ 100 PSI -PRESSURE RATING: 58 TO 232 MIN/MAX PSI -RATED FLOW: 50 TO 100 DEGREES F (RECOMMENDED OPERATING TEMPERATURE RANGE) -CONNECTION NPT: 1" NPT

USED 6" BERKELEY WATER PUMP POWERED BY CATERPILLAR 150 HP DIESEL ENGINE. SPECS & FEATURES: -CAPABLE OF PUSHING 1600 FEET OF 6 INCH WATER LINE MAINTAINING A PRESSURE OF OVER 120 PSI. -PUMP IS POWERED BY A COMPLETELY REFURBISHED 150 HORSEPOWER CATERPILLAR DIESEL MOTOR. -NO DEF FLUID REQUIRED MOTOR. -PUMP HAS BEEN BUILT BY A PROFESSIONAL IRRIGATION SPECIALIST, IT WORKS PERFECTLY AND ITS READY TO PUMP WATER. -ALL NECESSARY EQUIPMENT FOR OPERATION IS INCLUDED. -NEW TIRES AND NEW BATTERIES -EVERYTHING IN THE PHOTOS IS INCLUDED

WELCH 1402B VACUUM PUMP SPECS & FEATURES: -PUMPING SPEED: 5.6 CFM (160 L/MIN) -MAX. VACUUM: 0.001 TORR -OIL CAPACITY: 2.25 QT(2.1 L) -TUBING NEEDED: 13/16"(21 MM) EXHAUST / INTAKE THREADS 1-20 PUMP RPM 525 -RUGGED AND ROBUST PUMP FOR APPLICATIONS REQUIRING PRESSURES < 1 TORR -ACHIEVES < 0.001 TORR WITH A PUMPING SPEED OF 160 LITERS/MIN (5.6 CFM). -TWO STAGE, OIL SEALED VACUUM PUMP

ACROSS INTERNATIONAL SE13 5L ROTARY EVAPORATOR W/ RECIRCULATING CHILLER. SPECS & FEATURES: -PROVIDES CONSTANT ROTATION AT SPEEDS FROM 10 TO 180 RPM -OPERATES FROM AMBIENT TEMPERATURE TO 99 DEGREES C (210 DEGREES F) WITH PID TEMPERATURE CONTROL STEPPING AT 0.1 DEGREES C INCREMENTS -1.32 GALLON (5 LITERS) ROUND-BOTTOMED EVAPORATING FLASK, 0.79 GALLON (3 LITERS) ROUND-BOTTOMED RECEIVING FLASK, AND VERTICAL CONDENSER. LOT INCLUDES: -MAIN APPARATUS -AI -30 DEGREES C 17L RECIRCULATING CHILLER: MODEL C30-17-10L

ABS AMERICAN BIOTECH SUPPLY ABT-EFS-30 30 CUFT UPRIGHT FLAMMABLE STORAGE FREEZER SPECS & FEATURES: -CAPACITY: 30 CUFT -SHELVES: 3 FIXED, 2 ADJ SHELVES -1/3 HP -6 AMPS LOT INCLUDES: -MAIN APPARATUS: CONTENTS NOT INCLUDED IN LOT -ATTACHED KILLARK EXPLOSION PROOF JUNCTION BOX. MODEL GRB-17618

BETOP BT-F20 CARTRIDGE FILLER & MINI LASER MARKER FOR LASER ENGRAVING OF PAX CARTRIDGES. SPECS & FEATURES: -SIZE (MM): NO LARGER THAN 12MM -POSITION: (X): -69.634 - (Y): -83.003 -ARRAY: (X): 35 .... (X): 5. /. (Y): 35.4 .... (Y): 5 -LASER POWER: 20W -INCLUDES FUME EXTRACTOR AND CONNECTING HOSES -INCLUDES (2) PAX CARTIDGE TRAYS (PICTURED) -POWER SUPPLY: AC110V/60HZ