Weekly Plant and Machinery Auction 5 x Tractor Units Direct From Frasers Group Speedboat Heavy Plant and Machinery Cars Vans Containers
Category: MISC
Total Lots:
366
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
300 X NEW & UNUSED HERAS FENCING FEET
|
🔒 Subscribe | |||
|
|
HYSTER | S80E 4T |
HYSTER S80E 4T GAS FORKLIFT, 4278 HOURS, 4800MM FULL FREE LIFT TRIPLE MAST - HYSTER 4 TONNE GAS FORKLIFT 4800MM FULL FREE LIFT TRIPLE MAST SIDE SHIFT
|
🔒 Subscribe | |
|
|
CLARK | C35L |
CLARK C35L COUNTERBALANCE GAS FORKLIFT, 4750 HOURS, 3.5 TONNE LIFT CAPACITY, 3.7M LIFT DUPLEX MAST LIFT 3725MM SIDE SHIFT SOLID TYRES
|
🔒 Subscribe | |
|
|
LINDE | EVO |
LINDE EVO 1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER SPEC MAST WITH SIDE SHIFT 1 OWNER FROM NEW 5775 HOURS CONTAINER SPEC COMES COMPLETE WITH CHARGER
|
🔒 Subscribe | |
|
|
CONQUIP | CA108-01000 |
CONQUIP 1000 LITRE BOAT SKIP - WORKING LOAD LIMIT: 2000KG WEIGHT: 252 KG CAPACITY: 1000 LITRE
|
🔒 Subscribe | |
|
|
2015 | YALE | GDP35VX |
2015 YALE GDP35VX 3.5 TONNE DIESEL FORKLIFT LOW 4344 HOURS FULL FREE LIFT TRIPLE MAST SIDE SHIFT TRUCK WEIGHT 5030KG MAXIMUM CAPACITY 3290KG MAX LOAD HEIGHT 4915MM NOMINAL POWER 34.2KW BACK TILT 5.0 DEGREES ATTACHMENT: 1220MM SS CRG + 1100MM FORKS
|
🔒 Subscribe |
|
|
CATERPILLAR |
CATERPILLAR 1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER MAST WITH SIDE SHIFT 4022 HOURS CONTAINER SPEC 1 OWNER FROM NEW GOOD BATTERY WITH CHARGER
|
🔒 Subscribe | ||
|
|
SEDGWICK | MORTICER ROUTING MACHINE |
SEDGWICK MORTICER ROUTING MACHINE TABLE SIZE: 500MM X 160MM TIMBER CAPACITY: 255MM X 160MM MAX CHISEL SOFTWOOD: 25MM MAX CHISEL HARDWOOD: 19MM MACHINE DIMENSIONS: 735MM X 630MM X 1520MM MACHINE WEIGHT 170KGS MOTOR POWER: 0.75KW 400V WELL MAINTAINED AND IN GOOD CONDITION HAS BEEN USED IN SET CONSTRUCTION IN THE FILM AND TV INDUSTRY
|
🔒 Subscribe | |
|
|
STAFF SEARCH CABIN |
STAFF SEARCH CABIN 1400CM LONG 370CM WIDE 337CM HIGH
|
🔒 Subscribe | ||
|
|
2017 | JCB | JS20MH |
2017 JCB JS20MH REHANDLER (14K HOURS) VERY GOOD CONDITION, HYDRAULIC HIGH RISE CAB, SOLID TYRES, LONG REACH ARM AND ROTATING SELECTOR GRAB
|
🔒 Subscribe |
|
|
JPC | HT12 |
JPC HT12 1.2 TONNE MINI DIGGER BRAND NEW, UNUSED DIESEL ENGINE
|
🔒 Subscribe | |
|
|
2013 | DOOSAN |
2013 DOOSAN 1.5 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, TRIPLE MAST WITH SIDE SHIFT CONTAINER SPEC - 1.5 TONNE LIFT, YEAR OF MANUFACTURE 2013, GOOD BATTERY COMPLETE WITH CHARGER
|
🔒 Subscribe | |
|
|
HSM | V-PRESS 610 |
HSM V-PRESS 610 VERTICAL BALER PRESS REDUCES THE VOLUME OF CARDBOARD AND PLASTIC FILM IN AN ECONOMICAL WAY. LOW INSTALLATION HEIGHT AND SMALL FOOTPRINT. SPECIAL RETAINING CLAWS OPTIMISE THE COMPRESSION OF THE PRESSING MATERIAL, INCREASING BOTH THE LOADING VOLUME AND BALE OUTPUT. QUICK AND EASY PRESS ASSEMBLY. MECHANICAL BALE EJECTOR. HIGH PROCESS RELIABILITY DUE TO HSM TCS (TORSION CONTROL SYSTEM). CONFIGURATION - ECO - DOUBLE DOOR WITH HAND WHEEL DOOR LOCK. PRESSING POWER - 120KN. 3KW MOTOR. VOLTAGE - 3 X 400V/50HZ. LOADING APERTURE (W X H) IN MM - 800 X 495. BALE WEIGHT IN KG (DEPENDING ON MATERIAL) - UP TO 100KG. BALE SIZE (L X W X H) IN MM - 800 X 600 X MAX 600. CYCLE TIME IN IDLE OPERATION IN SEC - 22. PRESS CHAMBER SIZE (W X D X H) IN MM - 800 X 600 X 1045. DIMENSIONS OF MACHINE (W X D X H) IN MM - 1198 X 823 X 1986. MACHINE WEIGHT IN KG - 540KG. STRAPPING - 3 FOLD POLYESTER TAPE.
|
🔒 Subscribe | |
|
|
2001 | STILL |
2001 STILL 2 TONNE ELECTRIC FORKLIFT, FORK POSITIONER, 7427 HOURS, 4 WHEELER, 4.5M MAST, CHARGER INCLUDED S/N: 150725
|
🔒 Subscribe | |
|
|
ROSAND | RH10 ADVANCED CAPILLARY RHEOMETER |
ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO NOW OWN ROSAND UNUSED FOR 5 YEARS AND BEEN IN LONG TERM STORAGE SINCE THEN, BUT WAS OPERATION PRIOR TO THIS POWERS UP CURRENTLY
|
🔒 Subscribe | |
|
|
HYUNDAI |
HYUNDAI 2.5 TONNE DIESEL FORKLIFT CONTAINER SPEC 4957 HOURS KUBOTA ENGINE WELL MAINTAINED 4.5M TRIPLE MAST 3RD AND 4TH SERVICE GOOD CONDITION ALL ROUND
|
🔒 Subscribe | ||
|
|
2008 | LINDE | E48 |
2008 LINDE E48 4.8 TONNE ELECTRIC FORKLIFT TRUCK 4 WHEELER 4.8 TONNE LIFT 3.3M MAST WITH EXTRA WIDE CARRIAGE AND BRAND NEW FORKS 3RD SERVICE COMPLETED SIDE SHIFT CAN BE ADDED AT EXTRA COST NEW CONTINENTAL TYRES FITTED TO REAR AND GOOD CONDITION TYRES ON THE FRONT GOOD BATTERY COMPLETE WITH CHARGER 10467 HOURS
|
🔒 Subscribe |
|
|
2024 |
2024 NEW ONE TRIP BLUE 4FT CONTAINER LOCK BOX FITTED FULLY WATERTIGHT IDEAL AS AN ALTERNATIVE TO SHED STORAGE EXTERNAL DIMENSIONS 1,200 X 2,200 X 2,260 MM (LXWXH) INTERNAL DIMENSIONS 1,049 X 2,112 X 2,065 MM (LXWXH) DOOR OPENING 1,962 X 2,106 MM (WXH) TARE WEIGHT 650 KG / MAXIMUM PAYLOAD 2,350 KG CAPACITY 4.6 M3
|
🔒 Subscribe | ||
|
|
181 BAYS OF BACK TO BACK FLOW RACKING CONSISTS 224 FRAMES, 910 FLOW SHELVES, DISMANTLED & PALLETISED. FRAME HEIGHT: 220CM, FRAME WIDTH: 100CM, SHELF DEPTH: 120CM, SHELF LENGTH: 255CM.
|
🔒 Subscribe | |||
|
|
INSTRON | 3520 |
2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM DONALDSON CHILLER INCLUDED
|
🔒 Subscribe | |
|
|
2012 | CATERPILLAR | EP18CPN |
2012 CATERPILLAR EP18CPN 1.6 ELECTRIC FORKLIFT CONTAINER SPEC, COMPLETE WITH CHARGER - CATERPILLAR 1.6 ELECTRIC FORKLIFT MODEL EP18CPN CONTAINER SPEC YEAR OF MANUFACTURE 2012 TRIPLE MAST WITH SIDE SHIFT 1.6 TONNE LIFT 4.7 METRE MAST GOOD BATTERY COMPLETE WITH CHARGER
|
🔒 Subscribe |
|
|
2015 | DOOSAN | B18X-7 |
2015 DOOSAN B18X-7 1.8 TONNE ELECTRIC FORKLIFT, ONLY 4539 HOURS, COMPLETE WITH CHARGER - DOOSAN 1.8 TONNE ELECTRIC FORKLIFT TRUCK MODEL B18X-7 ONLY 4539 HOURS 3.7M MAST WITH SIDE SHIFT YEAR OF MANUFACTURE 2015 COMPLETE WITH CHARGER
|
🔒 Subscribe |
|
|
2014 | VOLVO | FMX GRABBER TIPPER |
2014 VOLVO FMX GRABBER TIPPER 414217KM / 257382 MILES MOT TO 30TH SEP 2025 LAST MOT PASS 24/9/24 WITH NO ADVISORIES PALFINGER EPSILON M125L CLASSIC CRANE 8 WHEELER EURO 6
|
🔒 Subscribe |
|
|
2018 | MERCEDES-BENZ | ACTROS 2546L |
2018 MERCEDES-BENZ ACTROS 2546L 6X2 DRAWBAR C/W HIAB 145 DL-1 HI PRO LOADER CRANE - 2018 MERCEDES-BENZ ACTROS 2546L 6X2 DRAWBAR C/W HIAB 145 DL-1 HI PRO LOADER CRANE WITH MTE BODY & TRAILER VRN - AY18 JXA 440,265 KM'S / 273567 MILES EURO 6 460 BHP, AUTOMATIC SINGLE SLEEPER REAR LIFT AXLE MICROWAVE, IN CAB CRANE CONTROL, GRAB CRANE, SUPPORT LEGS COLOUR: BLUE FUEL TYPE - DIESEL DATE REGISTERED - 29 JUNE 2018 ANNUAL TEST VALID UNTIL - 30 APRIL 2025
|
🔒 Subscribe |
|
|
KUKA | KR210 R2700 PRIME |
KUKA KR210 R2700 PRIME INDUSTRIAL ROBOT COMPLETE WITH KRC4 CONTROLLER, TOOL EXCHANGE STAND AND CHILLER HAS NOT BEEN IN USE AT IT'S PRESENT LOCATION FOR A NUMBER OF YEARS, BUT IS OPERATIONAL A SERVICE IS RECOMMENDED AFTER NEW INSTALL
|
🔒 Subscribe | |
|
|
2017 | CATERPILLAR | GP18NT |
2017 CATERPILLAR GP18NT GAS POWERED FORKLIFT TRUCK, 8185 HOURS RATED CAPACITY 1750KG NOMINAL POWER 41KW 4.7 LIFT HEIGHT CONTAINER SPEC MAST WITH SIDE SHIFT IN EXCELLENT WORKING ORDER, WELL MAINTAINED VERY CLEAN AND UP TOGETHER FORKLIFT TRUCK READY TO GET STRAIGHT TO WORK
|
🔒 Subscribe |
|
|
LINDE | H50D |
LINDE H50D 5 TONNE DIESEL FORKLIFT FULL HEATED CAB 4.2M MAST WITH 3RD AND 4TH SERVICE LOW HOURS WELL MAINTAINED
|
🔒 Subscribe | |
|
|
1997 | HAAS AUTOMATION | OE |
1997 HAAS AUTOMATION VERTICAL MILL CNC MACHINE MODEL OE HAAS VERTICAL MILL MODEL OE INCLUDED IS THE 4TH AXIS YEAR OF MANUFACTURE JULY 1997 SERIAL - 10897 DATE OF MFG - 07/97 VOLTAGE - 360-480 PHASE - 3 HZ - 50/60 FULL LOAD - 20 AMPS LARGEST LOAD - 20 AMPS TRAVELS S.A.E METRIC X AXIS 20.0 IN 508 MM Y AXIS 16.0 IN 406 MM Z AXIS 20.0 IN 508 MM SPINDLE NOSE TO TABLE (~ MAX) 24.0IN 610 MM SPINDLE NOSE TO TABLE (~ MIN) 4.0 IN 102 MM 8K RPM SPINDLE. BT40 TOOLING ADDITIONAL FEATURES INCLUDE: HAAS M CONTROLLER AND ROTARY TABLE. THE TABLE ITSELF CAN BE USED ON ANY NEWER HAAS MACHINE (THAT SUPPORTS BRUSHLESS MOTORS). M CONTROLLER ALSO WORKS WITH ANY OTHER HAAS. FLOPPY DISK STATION WAS REPLACED WITH USB EMULATOR. CRT DISPLAY REPLACED WITH LCD.
|
🔒 Subscribe |
|
|
2014 | COSMIC FOX | 16 CNC SAW |
2014 COSMIC FOX 16 CNC SAW APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH IN DAILY USED AND IN GOOD WORKING ORDER
|
🔒 Subscribe |
|
|
EBM | KDP400 |
[2017] EBM KDP400 EDGEBANDER INCLUDES GTEC COMPRESSOR AND AIR TANK APPROXIMATE DIMENSIONS ARE: 4000MM, 1200MM WIDE, AND 1400MM HIGH CURRENTLY IN DAILY USE AND IN GOOD WORKING ORDER
|
🔒 Subscribe | |
|
|
2006 | TOYOTA |
2006 TOYOTA 1.8 TONNE GAS FORKLIFT, 10284 HOURS - TOYOTA 1.8 TONNE GAS FORKLIFT TOYOTA FORKLIFT TRUCK 1.8 TONNE LIFT 3.7M MAST WITH SIDE SHIFT YEAR OF MANUFACTURE 2006 10284 HOURS
|
🔒 Subscribe | |
|
|
2018 | RUIZHOU | RZCRT5-2516 |
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516 CNC CUTTING MACHINE RZCRT5-2516 YEAR OF MANUFACTURE 2018 CONDITION: USED, GOOD
|
🔒 Subscribe |
|
|
2020 | PFAFF | 1245 |
2020 PFAFF 1245 SEWING MACHINE - YEAR OF MANUFACTURE: 2020 CONDITION: USED, GOOD
|
🔒 Subscribe |
|
|
2020 | UNIFY | HIGH FREQUENCY MACHINE |
2020 UNIFY HIGH FREQUENCY MACHINE - CONDITION: USED, GOOD
|
🔒 Subscribe |
|
|
JCB | HYDRAULIC POWER PACK |
JCB HYDRAULIC POWER PACK WITH HAMMER FULLY WORKING
|
🔒 Subscribe | |
|
|
WADKIN | OVERHEAD CUT PRO 14 |
WADKIN 400 VOLT OVERHEAD CUT PRO 14 CHOP SAW NEW BLADE AND NEW REPLACEMENT MOTOR HAS BEEN FITTED TO THIS SAW 2 IDENTICAL CHOP SAWS ARE AVAILABLE, THE SECOND IDENTICAL CHOP SAW IS LISTED UNDER LOT 17 IN GOOD WORKING CONDITION AND VERY WELL MAINTAINED HAS BEEN USED FOR SET MANUFACTURING IN THE FILM AND TV INDUSTRY
|
🔒 Subscribe | |
|
|
GRUNDFOS | PUMP |
GRUNDFOS PUMP WITH 0 RUNNING HOURS, PURCHASED ON 31/3/2023. THE PUMP SUFFERED MINOR COSMETIC DAMAGE DURING TRANSPORT AND WAS REJECTED. IT IS SURPLUS TO REQUIREMENTS.
|
🔒 Subscribe | |
|
|
HIROX | HDX-20 |
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE
|
🔒 Subscribe | |
|
|
24FT STATIC WELFARE UNIT WITH TOILET, CANTEEN, GENERATOR, SITE CABIN OFFICE WELFARE CONTAINER - 24FT STATIC WELFARE UNIT WITH TOILET, CANTEEN, GENERATOR SITE CABIN OFFICE WELFARE CONTAINER
|
🔒 Subscribe | |||
|
|
2020 | DOOSAN | G25P-7 |
2020 DOOSAN G25P-7 2.5 TONNE GAS FORKLIFT TRUCK, CONTAINER SPEC, 6828 HOURS - 2020 DOOSAN 2.5 TONNE GAS FORKLIFT TRUCK CONTAINER SPEC 6828 HOURS YEAR OF MANUFACTURE: JULY 2020 NEW TYRES ALL ROUND WELL MAINTAINED 4.5M TRIPLE MAST WITH SIDE SHIFT GOOD CONDITION ALL ROUND VERY ORIGINAL
|
🔒 Subscribe |
|
|
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
|
🔒 Subscribe | |||
|
|
20 |
20FT SITE WELFARE OFFICE LIGHTING, HEATING AND POWER INSTALLED
|
🔒 Subscribe | ||
|
|
2006 | HAYTER | MT313 |
2006 HAYTER MT313 TRIPLE MOWER ROLL BAR YEAR 2006 20HP 3 CYLINDER KUBOTA DIESEL ENGINE ROAD REGISTERED ROPS HST 3WD PAS INDEPENDENT FLOATING HEADS THE HAYTER MT313 IS A TRIPLE CYLINDER MOWER DESIGNED FOR PRECISION CUTTING. THIS 3WD ORNAMENTAL FINISHING MOWER HAS 7 KNIFE FLOATING HEAD UNITS AND A 2.1M CUTTING WIDTH. OPTIONAL CUT AND COLLECT WITH GRASS BOXES. THE REAR MOUNTED ENGINE MOVES NOISE AWAY FROM THE OPERATOR AND ALSO INCREASES VISIBILITY OF THE CUTTING UNITS. A UNIQUE FEATURE OF THE MT313, AND A TRIPLE MOWER, IS THAT THE UNITS FULLY FOLD UP, REDUCING THE MACHINE WIDTH FOR TRANSPORT AND STORAGE. THIS MACHINE WOULD BE SUITABLE FOR CRICKET OUTFIELDS, TENNIS COURTS, TEE BOXES, ORNAMENTAL LAWNS AND SMALL PLAYING FIELDS WHERE A HIGHER QUALITY CUT IS IMPORTANT.
|
🔒 Subscribe |
|
|
2013 | TORO | LT3340 |
2013 TORO LT3340 TRIPLE TURF MOWER (1,080 HOURS) ROAD REGISTERED GANG RIDE ON MOWER 35HP 4 CYLINDER KUBOTA DIESEL ENGINE 4X4 10" HEADS WITH 6 BLADES HST PAS ROPS FLASHING BEACON ROAD REGISTERED HIGH PERFORMANCE REEL MOWER. HEAVY DUTY, ROBUST CONSTRUCTION. POWERFUL & RELIABLE KUBOTA DIESEL ENGINE. BUILDING ON A LONG STANDING LEGACY, THE HIGH QUALITY DESIGN AND ROBUST HEAVY DUTY CONSTRUCTION WILL MEET THE MOST DEMANDING OF ENVIRONMENTS WHILST THE RANGE OF HIGH-PERFORMANCE, COMMERCIAL SPECIFICATION CUTTING UNITS WILL PROVIDE THE PERFECT FINISH EVERY TIME. FROM LIGHT TRIMMING TO MOWING DENSE, OVERGROWN AREAS, THE LT3340 CAN BE TAILORED TO SUIT YOUR MOWING APPLICATION.
|
🔒 Subscribe |
|
|
2016 | VOLKSWAGEN | CRAFTER LUTON VAN |
2016 VOLKSWAGEN CRAFTER LUTON VAN WITH TAIL-LIFT, 232,000 MILES, MOT TO 10/7/25 - 2016 VOLKSWAGEN CRAFTER LUTON VAN WITH TAIL-LIFT 232,000 MILES MOT TO 10/7/25 LAST MOT PASS ON 11TH JULY 2024 WITH MILEAGE RECORDED AT 212,410 MILES DATE FIRST REGISTERED 17TH OCTOBER 2016 ULEZ & CLEAN AIR ZONE COMPLIANT DIESEL
|
🔒 Subscribe |
|
|
2021 | MERCEDES-BENZ | SPRINTER 315 PROGRESSIVE CDI |
2021 MERCEDES SPRINTER 150 3.5T DROPSIDE TAIL-LIFT (97,901 MILES) VRN - MC21 DDZ MERCEDES-BENZ SPRINTER 315 PROGRESSIVE CDI COLOUR - WHITE FUEL TYPE - DIESEL DATE REGISTERED - 30 JULY 2021 MOT VALID UNTIL - 29 JULY 2025 EURO 6, DAY CAB, 3 SEATS, MANUAL GEARBOX, WHITE CAB, LWB, BEACONS, TRAFFIC MANAGEMENT SPEC 97,091 MILES
|
🔒 Subscribe |
|
|
HIROXXX | HDX-10 |
HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE - HIROXXX HDX-10 (BRAND NEW AND UNUSED) HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE
|
🔒 Subscribe | |
|
|
WALDYS | WALDYSSA W55 |
[WALDYSSA W55] WALDYS WALDYSSA W55 AUTO STRETCH FOOD TRAY SHRINK WRAPPER WRAPPING MACHINE SWISS MADE MACHINE POWERS UP BUT NOT TESTED FURTHER PLUS NEEDS A SERVICE/ NEW BELTS.
|
🔒 Subscribe | |
|
|
CATERPILLAR |
CATERPILLAR 4 TONNE DIESEL FORKLIFT TRIPLE MAST 5084 HOURS 4.6M MAST WITH SIDE SHIFT ORIGINAL TRUCK 4 TONNE LIFT LOW 5084 HOURS DIESEL ENGINE PART CAB RECENT NEW TYRES GOOD CONDITION ALL ROUND
|
🔒 Subscribe | ||
|
|
2011 | CATERPILLAR | EP25 |
2011 CATERPILLAR EP25 2.5T ELECTRIC FORKLIFT, FULL FREE 6.5M LIFT, SIDE SHIFT 2011 MODEL ONLY 3455 HOURS, CHARGER INCLUDED
|
🔒 Subscribe |
300 X NEW & UNUSED HERAS FENCING FEET
HYSTER S80E 4T
HYSTER S80E 4T GAS FORKLIFT, 4278 HOURS, 4800MM FULL FREE LIFT TRIPLE MAST - HYSTER 4 TONNE GAS FORK...
CLARK C35L
CLARK C35L COUNTERBALANCE GAS FORKLIFT, 4750 HOURS, 3.5 TONNE LIFT CAPACITY, 3.7M LIFT DUPLEX MAST L...
LINDE EVO
LINDE EVO 1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER SPEC MAST WITH SIDE SHIFT 1 OWNER FROM NEW 5775...
CONQUIP CA108-01000
CONQUIP 1000 LITRE BOAT SKIP - WORKING LOAD LIMIT: 2000KG WEIGHT: 252 KG CAPACITY: 1000 LITRE...
2015 YALE GDP35VX
2015 YALE GDP35VX 3.5 TONNE DIESEL FORKLIFT LOW 4344 HOURS FULL FREE LIFT TRIPLE MAST SIDE SHIFT TRU...
CATERPILLAR
CATERPILLAR 1.6 TONNE ELECTRIC FORKLIFT 4.6M CONTAINER MAST WITH SIDE SHIFT 4022 HOURS CONTAINER SPE...
SEDGWICK MORTICER ROUTING MACHINE
SEDGWICK MORTICER ROUTING MACHINE TABLE SIZE: 500MM X 160MM TIMBER CAPACITY: 255MM X 160MM MAX CHISE...
STAFF SEARCH CABIN
STAFF SEARCH CABIN 1400CM LONG 370CM WIDE 337CM HIGH...
2017 JCB JS20MH
2017 JCB JS20MH REHANDLER (14K HOURS) VERY GOOD CONDITION, HYDRAULIC HIGH RISE CAB, SOLID TYRES, LON...
JPC HT12
JPC HT12 1.2 TONNE MINI DIGGER BRAND NEW, UNUSED DIESEL ENGINE...
2013 DOOSAN
2013 DOOSAN 1.5 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, TRIPLE MAST WITH SIDE SHIFT CONTAINER SPEC ...
HSM V-PRESS 610
HSM V-PRESS 610 VERTICAL BALER PRESS REDUCES THE VOLUME OF CARDBOARD AND PLASTIC FILM IN AN ECONOMIC...
2001 STILL
2001 STILL 2 TONNE ELECTRIC FORKLIFT, FORK POSITIONER, 7427 HOURS, 4 WHEELER, 4.5M MAST, CHARGER INC...
ROSAND RH10 ADVANCED CAPILLARY RHEOMETER
ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO N...
HYUNDAI
HYUNDAI 2.5 TONNE DIESEL FORKLIFT CONTAINER SPEC 4957 HOURS KUBOTA ENGINE WELL MAINTAINED 4.5M TRIPL...
2008 LINDE E48
2008 LINDE E48 4.8 TONNE ELECTRIC FORKLIFT TRUCK 4 WHEELER 4.8 TONNE LIFT 3.3M MAST WITH EXTRA WIDE ...
2024
2024 NEW ONE TRIP BLUE 4FT CONTAINER LOCK BOX FITTED FULLY WATERTIGHT IDEAL AS AN ALTERNATIVE TO SHE...
181 BAYS OF BACK TO BACK FLOW RACKING CONSISTS 224 FRAMES, 910 FLOW SHELVES, DISMANTLED & PALLETISED
INSTRON 3520
2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 35...
2012 CATERPILLAR EP18CPN
2012 CATERPILLAR EP18CPN 1.6 ELECTRIC FORKLIFT CONTAINER SPEC, COMPLETE WITH CHARGER - CATERPILLAR 1...
2015 DOOSAN B18X-7
2015 DOOSAN B18X-7 1.8 TONNE ELECTRIC FORKLIFT, ONLY 4539 HOURS, COMPLETE WITH CHARGER - DOOSAN 1.8 ...
2014 VOLVO FMX GRABBER TIPPER
2014 VOLVO FMX GRABBER TIPPER 414217KM / 257382 MILES MOT TO 30TH SEP 2025 LAST MOT PASS 24/9/24 WIT...
2018 MERCEDES-BENZ ACTROS 2546L
2018 MERCEDES-BENZ ACTROS 2546L 6X2 DRAWBAR C/W HIAB 145 DL-1 HI PRO LOADER CRANE - 2018 MERCEDES-BE...
KUKA KR210 R2700 PRIME
KUKA KR210 R2700 PRIME INDUSTRIAL ROBOT COMPLETE WITH KRC4 CONTROLLER, TOOL EXCHANGE STAND AND CHILL...
2017 CATERPILLAR GP18NT
2017 CATERPILLAR GP18NT GAS POWERED FORKLIFT TRUCK, 8185 HOURS RATED CAPACITY 1750KG NOMINAL POWER 4...
LINDE H50D
LINDE H50D 5 TONNE DIESEL FORKLIFT FULL HEATED CAB 4.2M MAST WITH 3RD AND 4TH SERVICE LOW HOURS WELL...
1997 HAAS AUTOMATION OE
1997 HAAS AUTOMATION VERTICAL MILL CNC MACHINE MODEL OE HAAS VERTICAL MILL MODEL OE INCLUDED IS THE ...
2014 COSMIC FOX 16 CNC SAW
2014 COSMIC FOX 16 CNC SAW APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH IN DAILY...
EBM KDP400
[2017] EBM KDP400 EDGEBANDER INCLUDES GTEC COMPRESSOR AND AIR TANK APPROXIMATE DIMENSIONS ARE: 4000M...
2006 TOYOTA
2006 TOYOTA 1.8 TONNE GAS FORKLIFT, 10284 HOURS - TOYOTA 1.8 TONNE GAS FORKLIFT TOYOTA FORKLIFT TRUC...
2018 RUIZHOU RZCRT5-2516
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516 CNC CUTTING MACHINE RZCRT5-2516 YEAR OF MANUFACTURE 201...
2020 PFAFF 1245
2020 PFAFF 1245 SEWING MACHINE - YEAR OF MANUFACTURE: 2020 CONDITION: USED, GOOD...
2020 UNIFY HIGH FREQUENCY MACHINE
2020 UNIFY HIGH FREQUENCY MACHINE - CONDITION: USED, GOOD...
JCB HYDRAULIC POWER PACK
JCB HYDRAULIC POWER PACK WITH HAMMER FULLY WORKING...
WADKIN OVERHEAD CUT PRO 14
WADKIN 400 VOLT OVERHEAD CUT PRO 14 CHOP SAW NEW BLADE AND NEW REPLACEMENT MOTOR HAS BEEN FITTED TO ...
GRUNDFOS PUMP
GRUNDFOS PUMP WITH 0 RUNNING HOURS, PURCHASED ON 31/3/2023. THE PUMP SUFFERED MINOR COSMETIC DAMAGE ...
HIROX HDX-20
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE...
24FT STATIC WELFARE UNIT WITH TOILET, CANTEEN, GENERATOR, SITE CABIN OFFICE WELFARE CONTAINER - 24FT
2020 DOOSAN G25P-7
2020 DOOSAN G25P-7 2.5 TONNE GAS FORKLIFT TRUCK, CONTAINER SPEC, 6828 HOURS - 2020 DOOSAN 2.5 TONNE ...
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
20
20FT SITE WELFARE OFFICE LIGHTING, HEATING AND POWER INSTALLED...
2006 HAYTER MT313
2006 HAYTER MT313 TRIPLE MOWER ROLL BAR YEAR 2006 20HP 3 CYLINDER KUBOTA DIESEL ENGINE ROAD REGISTER...
2013 TORO LT3340
2013 TORO LT3340 TRIPLE TURF MOWER (1,080 HOURS) ROAD REGISTERED GANG RIDE ON MOWER 35HP 4 CYLINDER ...
2016 VOLKSWAGEN CRAFTER LUTON VAN
2016 VOLKSWAGEN CRAFTER LUTON VAN WITH TAIL-LIFT, 232,000 MILES, MOT TO 10/7/25 - 2016 VOLKSWAGEN CR...
2021 MERCEDES-BENZ SPRINTER 315 PROGRESSIVE CDI
2021 MERCEDES SPRINTER 150 3.5T DROPSIDE TAIL-LIFT (97,901 MILES) VRN - MC21 DDZ MERCEDES-BENZ SPRIN...
HIROXXX HDX-10
HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE - HIROXXX HDX-10 (BRAND NEW AND UNUSED) HYDRAULIC BREAKER ...
WALDYS WALDYSSA W55
[WALDYSSA W55] WALDYS WALDYSSA W55 AUTO STRETCH FOOD TRAY SHRINK WRAPPER WRAPPING MACHINE SWISS MADE...
CATERPILLAR
CATERPILLAR 4 TONNE DIESEL FORKLIFT TRIPLE MAST 5084 HOURS 4.6M MAST WITH SIDE SHIFT ORIGINAL TRUCK ...
2011 CATERPILLAR EP25
2011 CATERPILLAR EP25 2.5T ELECTRIC FORKLIFT, FULL FREE 6.5M LIFT, SIDE SHIFT 2011 MODEL ONLY 3455 H...