Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More
Category: CONSTRUCTION EQUIPMENT
Total Lots:
317
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
26FT STATIC WELFARE CABIN WITH GENERATOR, TOILET, CANTEEN, OFFICE - 10FT WIDE
|
🔒 Subscribe | |||
|
|
2017 | FORD | TRANSIT CONNECT |
2017 FORD TRANSIT CONNECT 1.5 DIESEL MANUAL 5 SPEED 12 MONTHS MOT TO 14/04/2027 LAST MOT PASS ON 14TH APRIL 2026 AT 140,822 MILES ADVISED NEEDS REAR BRAKES DISCS AND PADS HAS WEIGHT SCALES TO WEIGH EACH WHEEL FULL WEIGHT OF VAN LOADED, WILL NEED RECALIBRATING FLASHING LIGHT ON TOP AIR VENT REVERSE WARNING SENSORS ALL BUILT IN SHELVES, LOCKERS AND WASH STATION SIDE LOADING DOOR WORKS GREAT HAD NEW ENGINE WITH 70K ONLY IN JANUARY AND TIMING DONE NEW BELT ONLY 1 DECLARED AT NEW WHICH WAS NETWORK RAIL 140,822 MILES
|
🔒 Subscribe |
|
|
NEWARC | VIPER 2500S |
NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SOURCE, NO LEADS INCLUDED
|
🔒 Subscribe | |
|
|
ONSRUD | INVERTED PIN ROUTER |
ONSRUD INVERTED PIN ROUTER A ROBUST INDUSTRIAL WOODWORKING MACHINE WHERE THE ROUTER BIT SPINS UPWARDS FROM A TABLE, GUIDED BY A PNEUMATIC PIN THAT MOVES UP AND DOWN WITH A FOOT PEDAL, ALLOWING FOR PRECISE, REPETITIVE EDGE ROUTING OF WOOD PARTS AGAINST TEMPLATES FOR HIGH-VOLUME PRODUCTION, OFFERING CONSISTENT DEPTH CONTROL AND DUST COLLECTION FOR SAFER, EFFICIENT FURNITURE & CABINETRY MAKING. INVERTED SETUP: THE ROUTER MOTOR AND BIT ARE MOUNTED UNDERNEATH THE TABLE, WITH THE CUTTING EDGE POINTING UP PNEUMATIC PIN: A PIN, CONTROLLED BY COMPRESSED AIR AND A FOOT PEDAL MOVES VERTICALLY TEMPLATE GUIDED: THE WORKPIECE IS ROUTED AGAINST A TEMPLATE, WITH THE PIN SUPPORTING THE MATERIAL AND CONTROLLING THE CUTTING DEPTH AS THE PEDAL IS PRESSED FOOT PEDAL CONTROL: PRESSING THE PEDAL RAISES THE ROUTER BIT AND DROPS THE PIN, ALLOWING THE WORKPIECE TO BE MOVED; RELEASING THE PEDAL RETRACTS THE PIN, STOPPING THE CUT
|
🔒 Subscribe | |
|
|
ROTAIR | MDVN ECO53 |
ROTAIR MDVN ECO53 MOBILE AIR COMPRESSOR - 175 CFM - 10 BAR - ONLY 89 HOURS USED - ENGINE MAKE: KOHLER - ENGINE TYPE: KDI 1903 TCR ST V - DISPLACEMENT: 1903 CC PERFECT FOR SAND BLASTING AND POWER TOOLS.
|
🔒 Subscribe | |
|
|
RENAULT | VAN |
RENAULT VAN MOT EXPIRED 28/09/2025 SHOWING 229,304 MILES - HAS 2 SIDE DOORS - CHECK INJECTION - CHECK ANTI POLLUTION SYSTEM - ENGINE WARNING LIGHT ON - SERVICE LIGHT ON
|
🔒 Subscribe | |
|
|
2014 | COSMIC FOX | 16 CNC SAW |
2014 COSMIC FOX 16 CNC SAW APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH IN DAILY USED AND IN GOOD WORKING ORDER
|
🔒 Subscribe |
|
|
2008 | NIFTYLIFT | HR12DE |
2008 NIFTYLIFT HR12DE 4 X 4 FULLY RESPRAYED
|
🔒 Subscribe |
|
|
2023 | SOVEREIGN | LABELLING MACHINE |
2023 SOVEREIGN LABELLING MACHINE
|
🔒 Subscribe |
|
|
2015 | RAVECO | 12-12-1 TRIBLOC |
2015 RAVECO 12-12-1 TRIBLOC CARBONATED GLASS BOTTLE RINSER. SMALL FOOTPRINT ROTARY RINSER FILLER CROWNER, PREVIOUSLY USED ON BEER PACKAGING WITH A MAXIMUM OUTPUT OF 2500 PCS PER HOUR. MACHINE HAS 4 SETS OF CHANGE PARTS - 2 X 330ML AND 2 X 500ML. DIMENSIONS: WIDTH 1500 MM, LENGTH 3500 MM, HEIGHT 2600 MM. POWER CONSUMPTION 3KW.
|
🔒 Subscribe |
|
|
CEBORA | TIGSTAR 150 DC |
CEBORA TIGSTAR 150 DC WELDING MACHINE. VINTAGE, PROFESSIONAL-GRADE INVERTER WELDING MACHINE DESIGNED FOR DC TIG AND MMA (STICK) WELDING.
|
🔒 Subscribe | |
|
|
TROJAN LABEL | T2-C STD |
TROJAN LABEL T2-C STD TABLETOP PRESS COLOUR LABEL PRINTER. THE T2-C BRIDGES THE GAP BETWEEN COMPACT, INEXPENSIVE DESKTOP LABEL PRINTERS AND EXPENSIVE, LARGE COMMERCIAL LABEL PRESS TO PROVIDE A HIGHLY FLEXIBLE AND PRODUCTIVE SOLUTION FOR PRINTING MEDIUM TO LARGE RUNS LABELS. EQUIPPED WITH ECONOMIC 2-LITRE INK TANKS, THE T2-C PROVIDES A PERFECT COMBINATION OF INCREASED PRINT ACCURACY AND REDUCED PRICE OF INK, OFFERING SIGNIFICANT COST SAVINGS OVER THE LIFE OF THE PRINTER.
|
🔒 Subscribe | |
|
|
IVITI | CR2 HB-39-IP |
IVITI CR2 HANGING BRACKET, MODEL HB-39-IP E39 BASE, 240V, 150W MAX. (10) BOXES. UNUSED, IN BOXES.
|
🔒 Subscribe | |
|
|
GRUNDFOS | CRN SERIES |
PAIR OF GRUNDFOS VERTICAL MULTISTAGE CENTRIFUGAL PUMPS, CRN SERIES WITH TITANIUM INTERNALS AND MGE160 INTELLIGENT MOTORS. PUMP REFERENCE: PN-SN A-99524678-10000002. MOTOR MODEL: MGE160MH 2-FF300-JA, VARIABLE-SPEED INTELLIGENT MOTOR WITH INTEGRATED VFD, IE4/IE5 EFFICIENCY CLASS. APPLICATION: CHEMICAL PROCESSING, WATER TREATMENT, SEAWATER SYSTEMS. QUANTITY: 2 UNITS.
|
🔒 Subscribe | |
|
|
ROSAND | RH10 |
ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO NOW OWN ROSAND UNUSED FOR 5 YEARS AND BEEN IN LONG TERM STORAGE SINCE THEN, BUT WAS OPERATION PRIOR TO THIS POWERS UP CURRENTLY
|
🔒 Subscribe | |
|
|
PFEIFER DRAKO LTD | 6X36WS-WC |
PFEIFER DRAKO LTD 6X36WS-WC 60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG
|
🔒 Subscribe | |
|
|
JP FLUID CONTROL | AG-020-B |
(33) UNITS INDUSTRIAL FLUID CONTROL & VALVE ACTUATORS. INCLUDES 8 X AG-020-B JP FLUID CONTROL ACTUATORS (USED), 2 X AG-020-B JP FLUID CONTROL ACTUATORS (NEW IN BOX), 4 X BALL VALVE GF / SPA PLASTICS 2000105 (USED), 9 X MOD S20 VALVE ACTUATOR (USED), 2 X MOD S55 VALVE ACTUATORS (NEW IN BOX), 4 X HQ-004 THREE-WAY ACTUATOR VALVE (USED), 2 X HQ-006 THREE-WAY ACTUATOR VALVE (USED), 2 X GRUNDFOS GAMMA X DOSING PUMPS.
|
🔒 Subscribe | |
|
|
1996 | ATLAS | 1604 SCRAP HANDLER |
1996 ATLAS 1604 SCRAP HANDLER, 14,900 HOURS - HIGH CAB SCRAP HANDLER WITH HIGH CAB, LONG ARM, GOOD TRACKS AND 5 TINE GRAB
|
🔒 Subscribe |
|
|
25 HOT WIRE STRIPE HEATER |
MACHINE 25 HOT WIRE STRIPE HEATER
|
🔒 Subscribe | ||
|
|
INSTRON | 3520 |
2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES - 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM DONALDSON CHILLER INCLUDED
|
🔒 Subscribe | |
|
|
23 HOT WIRE STRIP HEATER |
MACHINE 23 HOT WIRE STRIP HEATER
|
🔒 Subscribe | ||
|
|
2017 | DAF | LF 150 FA |
2017 DAF LF 150 FA WITH A FREEZER/ CHILLER UNIT AND TAIL LIFT FITTED. PLATING CERTIFICATE INCLUDED. IT HAS COMPLETED CIRCA 56,000KM.
|
🔒 Subscribe |
|
|
2022 | IVECO | 50C18 |
2022 IVECO 50C18 WITH VAN MOUNTED ACCESS PLATFORM, MEWP, 13,357 MILES. MOT TO 31ST JANUARY 2026. LAST MOT WAS A CLEAR PASS WITH NO ADVISORIES ON 22ND JANUARY 2025 AT 13,528 KM'S. WITH VAN MOUNTED ACCESS PLATFORM, MOBILE ELEVATING WORK PLATFORM, GARDNER DENVER POWERED ACCESS. REGISTRATION NUMBER: BD72UOB.
|
🔒 Subscribe |
|
|
2014 | JCB | TLT |
2014 JCB TLT 3.5 TONNE DIESEL, 6893 HOURS, 4WD
|
🔒 Subscribe |
|
|
NEWFOIL | 3000 MK2 |
NEWFOIL 3000 MK2 ROLL FED HOT FOIL STAMPER, EMBOSSER & DIE CUTTING MACHINE - THE NEWFOIL 3000 MK2 IS A ROLL-FED HOT FOIL STAMPING, EMBOSSING, AND DIE-CUTTING MACHINE DESIGNED FOR HIGH-QUALITY LABEL FINISHING. IT IS PRIMARILY USED IN THE PRINTING INDUSTRY TO ADD DECORATIVE METALLIC FOILS AND CUSTOM SHAPES TO LABEL WEBS.
|
🔒 Subscribe | |
|
|
PRIMERA | FX1200 |
PRIMERA FX1200 LABEL FINISHING SYSTEM. DIGITAL FINISHING SYSTEM TO DIGITALLY CUT LABELS TO ANY SIZE OR SHAPE WITHOUT DIES, LAMINATE, SLIT AND REWIND LABELS IN A SINGLE PROCESS. ALL-IN-ONE OFF-LINE SOLUTION THAT PRODUCES ROLLS OF FINISHED LABELS PRODUCED BY A VARIETY OF NARROW-WEB OUTPUT DEVICES LIKE THE PRIMERA CX1200 OR AFINIA L801 MEMJET LABEL PRINTERS. QUICKLY AND EASILY PERFORM ALL OF THESE LABEL FINISHING STEPS IN A SINGLE, INTEGRATED AND AUTOMATED PROCESS.
|
🔒 Subscribe | |
|
|
GREEN MACHINE | 424HS |
GREEN MACHINE 424HS WALK BEHIND ROAD & YARD SWEEPER WITH RIDE ON CAB ATTACHMENT SPARES OR REPAIRS NON RUNNER NOT BEEN LOOKED AT BUT LOOKS ALL THERE
|
🔒 Subscribe | |
|
|
FOUNTAIN BASIN WITH ARABIC STYLE CALLIGRAPHY, POSSIBLY MARBLE OR RECONSTITUTED MARBLE
|
🔒 Subscribe | |||
|
|
PFEIFER DRAKO LTD | 6X36WS-WC |
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG
|
🔒 Subscribe | |
|
|
2018 | RUIZHOU | RZCRT5-2516 |
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516
|
🔒 Subscribe |
|
|
2020 | UNIFY | HIGH FREQUENCY MACHINE |
2020 UNIFY HIGH FREQUENCY MACHINE. CONDITION: USED, GOOD.
|
🔒 Subscribe |
|
|
WADKIN | OVERHEAD CUT PRO 14 |
WADKIN OVERHEAD CUT PRO 14 CHOP SAW. 400 VOLT. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. GOOD WORKING CONDITION, VERY WELL MAINTAINED. USED FOR SET MANUFACTURING IN THE FILM AND TV INDUSTRY.
|
🔒 Subscribe | |
|
|
2023 | GRUNDFOS |
GRUNDFOS PUMP, NEVER BEEN INSTALLED, 0 RUNNING HOURS, FLOW RATE: 293.9M3/HR AT 71.2M, PORTS ARE CAPPED, DRY STORED, WEIGHT: 1.1 TONNES, PURCHASED ON 31/3/2023, SUFFERED MINOR COSMETIC DAMAGE, SURPLUS TO REQUIREMENTS
|
🔒 Subscribe | |
|
|
HIROX | HDX-20 |
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE
|
🔒 Subscribe | |
|
|
1994 | NISSHINBO | HTP-1000 |
1994 NISSHINBO HTP-1000 CNC TURRET PUNCH PRESS CAPACITY: 22 TON 3 PHASE VOLTAGE: 415V S/N:
|
🔒 Subscribe |
|
|
AZ E-LITE | LT8B-209E |
AZ E-LITE AZCEL LT8B-E SERIES 2-FT T8 LED TUBES WITH STARTER/FUSE MODEL LT8B-209E (LIKELY ~9W), COLOUR: COOL WHITE (840) QTY: 10 TUBES PER BOX 10 CARTONS OF 10 TUBES NEW IN CARTONS
|
🔒 Subscribe | |
|
|
1998 | KING RICH INDUSTRIES | KR-V2000 |
1998 KING RICH INDUSTRIES KR-V2000 VERTICAL TURRET MILLING MACHINE, BRIDGEPORT-STYLE MILL SUPPLY: 415V, 3 PHASE POWER: 2.25 KW (3HP)
|
🔒 Subscribe |
|
|
2016 | C404888 |
2016 67 CUBIC YARD TRI AXLE TIPPING TRAILER HALDEX BRAKES NEW PADS ALL ROUND NEW DISCS ON REAR AXLE SAT AXLES WITH PAINTED HUBS HEIGHT ADJUSTABLE SUSPENSION DURABRIGHT ALLOYS 385/65/22.5 ELECTRIC SHEET ON BOARD WEIGHER (WIRED FOR PM, IN CAB DISPLAY) GRAIN HATCH AND SOCK STORAGE BOX ( LARGE) ADDITIONAL REVERSING AND WORK LIGHTS LED LIGHTS ALL ROUND FRONT GANTRY NEW SHEET MOTOR 12 MONTHS MOT ORIGINAL FLOOR WITH MINIMAL WEAR CHASSIS PLATE AND TRAILER CHASSIS C404888 VEHICLE IDENTIFICATION NUMBER SFRWPDSS3FG810001 TRAILER IS NOT TASCC REGISTERED S/N: SFRWPDSS3FG810001
|
🔒 Subscribe | |
|
|
2025 | BROUGHTON | MCE 9.0-21E |
2025 BROUGHTON MCE 9.0-21E MOBILE AIR CONDITIONER INCLUDING BLUE INSULATED BAG PREVIOUSLY USED AS A TEMPORARY PRODUCT COOL STORE
|
🔒 Subscribe |
|
|
2024 | WCL STORAGE SYSTEMS | PALLET RACKING |
WCL STORAGE SYSTEMS PALLET RACKING, 9 BAYS / 27 EUROPALLET SPACES. TIMBER TOPS INCLUDED. INSTALLED OCT 2024.
|
🔒 Subscribe |
|
|
2024 |
SUPPORT PLATFORM MILD STEEL NON-ACCESSIBLE PLANT PLATFORM USED FOR SUPPORTING FILTRATION MACHINERY INCLUDING GRP DECK AND GALVANISED STEEL BALUSTRADE DESIGNED BY STRUCTURAL ENGINEER, MBA TRURO INSTALLED OCTOBER 2024
|
🔒 Subscribe | ||
|
|
2024 | SYSTEMAIR | MUB/T 062 630D4 |
2024 SYSTEMAIR CENTRIFUGAL BOX FAN, MUB/T 062 630D4 INDUSTRIAL SYSTEMAIR FAN DESIGNED TO EXTRACT AIR FROM KITCHEN ENVIRONMENTS OR INDUSTRIAL APPLICATIONS, WHERE MOTOR MUST BE PLACED OUTSIDE OF AIR STREAM. S/N: 399727/1008843514-004/20240816
|
🔒 Subscribe |
|
|
2024 | PURIFIED AIR |
4 X PURIFIED AIR ELECTROSTATIC PRECIPITATION (ESP) UNITS - GROUP OF 4 PURIFIED AIR ELECTROSTATIC PRECIPITATION (ESPS) FILTERS FOR REMOVAL OF SMOKE FROM COMMERCIAL / INDUSTRIAL COOKING PROCESSES. INSTALLED IN OCTOBER 2024. THESE UNITS USED FOR SMOKE PARTICULATE REMOVAL FROM THE PROCESS OF COOLING ROASTED COFFEE. THE UNITS HAVE BEEN VERY WELL MAINTAINED WITH DAILY FILTER PANEL CHANGE OUTS, WASHED AND DRIED. THE ESP CELLS WERE EXCHANGED EVERY MONTH, TAKEN AWAY AND CLEANED BY THE INSTALLER, PARTRIDGE VENTILATION. USED CONDITION. SERIAL NUMBERS E452022 09550, E452022 09429, E452022 09421, E452022 09549.
|
🔒 Subscribe | |
|
|
LOCAL EXHAUST VENTILATION 11
|
🔒 Subscribe | |||
|
|
2015 | MONTI ANTONIO | 855 |
2015 MONTI ANTONIO THERMOPRINTING CALENDAR TRANSFER MACHINE MODEL 855 TENSION VAC 415-3-50 HZ TOTAL POWER 32 KW S/N: 2015133
|
🔒 Subscribe |
|
|
ARCO | XYZ150VS |
ARCO PILLAR DRILL, DRILL PRESS, MODEL XYZ150VS, VARIABLE SPEED
|
🔒 Subscribe | |
|
|
PP 31 TRANSPARENT |
(2088) ROLLS CLEAR POLYPROPYLENE PACKING TAPE (PP 31 TRANSPARENT) 25MM X 330M PER ROLL. SUITABLE FOR USE WITH AUTOMATED TAPING/STRAPPING MACHINES. IDEAL FOR PACKAGING OPERATIONS, FULFILMENT CENTRES, OR RESALE. TOTAL TAPE FOOTAGE: APPROXIMATELY 689,040 METRES (689KM) ACROSS THE LOT.
|
🔒 Subscribe | ||
|
|
BF80 |
BF80 CRUSHER BUCKET TO SUIT 20 TONNE MACHINE
|
🔒 Subscribe | ||
|
|
MARDEN EDWARDS | MES 313 |
MARDEN EDWARDS MES 313 HIGH-SPEED OVERWRAPPING MACHINE. A PROFESSIONAL, HIGH-PRECISION OVERWRAPPING MACHINE FROM THE RENOWNED BRITISH MANUFACTURER, MARDEN EDWARDS. THIS MACHINE IS THE INDUSTRY STANDARD FOR HIGH-QUALITY PACKAGING, SPECIFICALLY DESIGNED TO PROVIDE A PREMIUM "GIFT-WRAP" FINISH FOR COSMETICS, PERFUMES, OR PHARMACEUTICAL BOXES. KEY FEATURES: PRECISION ENGINEERING: RENOWNED FOR PERFECT TUCK-AND-FOLD SEALS, ENSURING YOUR PRODUCT STANDS OUT ON RETAIL SHELVES. USER INTERFACE: EQUIPPED WITH A MODERN PLC TOUCHSCREEN CONTROL PANEL FOR FAST SETUP AND EASY ADJUSTMENTS. SAFETY & BUILD: FULLY ENCLOSED WITH SAFETY INTERLOCKED GUARDS (BLUE-TINTED PLEXIGLASS) AND AN EMERGENCY STOP BUTTON. TECHNICAL SPECIFICATIONS (MODEL MES 313): POWER: 415V / 3 PHASE / 50HZ (INDUSTRIAL POWER) CURRENT: 14 AMPS WEIGHT: 235 KG COMPLIANCE: CE MARKED S/N: W3975
|
🔒 Subscribe | |
|
|
MARDEN EDWARDS | MES 700-80S |
2000 MARDEN EDWARDS MES 700-80S INDUSTRIAL HEAT SHRINK TUNNEL, 230V. HEAVY-DUTY, PROFESSIONAL HEAT SHRINK TUNNEL. RUNS ON A 230V SINGLE PHASE SUPPLY. TECHNICAL SPECIFICATIONS: MODEL: MES 700-80S, POWER: 230V / SINGLE PHASE / 50HZ, CURRENT: 18 AMPS, AIR PRESSURE: 6 BAR, WEIGHT: 450 KG, COMPLIANCE: CE MARKED. FEATURES: CONSISTENT HEAT FLOW, INTEGRATED CONTROL PANEL, DURABLE CONSTRUCTION, BRITISH BUILT. CONDITION: GOOD, CLEAN INDUSTRIAL CONDITION. SOLD AS SEEN.
|
🔒 Subscribe |
26FT STATIC WELFARE CABIN WITH GENERATOR, TOILET, CANTEEN, OFFICE - 10FT WIDE
2017 FORD TRANSIT CONNECT
2017 FORD TRANSIT CONNECT 1.5 DIESEL MANUAL 5 SPEED 12 MONTHS MOT TO 14/04/2027 LAST MOT PASS ON 14T...
NEWARC VIPER 2500S
NEWARC VIPER 2500S TIG/STICK REMOTE WELDER, MADE IN THE UK, COMES WITH NEWARC R5000 WELDING POWER SO...
ONSRUD INVERTED PIN ROUTER
ONSRUD INVERTED PIN ROUTER A ROBUST INDUSTRIAL WOODWORKING MACHINE WHERE THE ROUTER BIT SPINS UPWARD...
ROTAIR MDVN ECO53
ROTAIR MDVN ECO53 MOBILE AIR COMPRESSOR - 175 CFM - 10 BAR - ONLY 89 HOURS USED - ENGINE MAKE: KOHLE...
RENAULT VAN
RENAULT VAN MOT EXPIRED 28/09/2025 SHOWING 229,304 MILES - HAS 2 SIDE DOORS - CHECK INJECTION - CHEC...
2014 COSMIC FOX 16 CNC SAW
2014 COSMIC FOX 16 CNC SAW APPROXIMATE DIMENSIONS: 5000MM LONG, 3000MM WIDE AND 2000MM HIGH IN DAILY...
2008 NIFTYLIFT HR12DE
2008 NIFTYLIFT HR12DE 4 X 4 FULLY RESPRAYED...
2023 SOVEREIGN LABELLING MACHINE
2023 SOVEREIGN LABELLING MACHINE...
2015 RAVECO 12-12-1 TRIBLOC
2015 RAVECO 12-12-1 TRIBLOC CARBONATED GLASS BOTTLE RINSER. SMALL FOOTPRINT ROTARY RINSER FILLER CRO...
CEBORA TIGSTAR 150 DC
CEBORA TIGSTAR 150 DC WELDING MACHINE. VINTAGE, PROFESSIONAL-GRADE INVERTER WELDING MACHINE DESIGNED...
TROJAN LABEL T2-C STD
TROJAN LABEL T2-C STD TABLETOP PRESS COLOUR LABEL PRINTER. THE T2-C BRIDGES THE GAP BETWEEN COMPACT,...
IVITI CR2 HB-39-IP
IVITI CR2 HANGING BRACKET, MODEL HB-39-IP E39 BASE, 240V, 150W MAX. (10) BOXES. UNUSED, IN BOXES....
GRUNDFOS CRN SERIES
PAIR OF GRUNDFOS VERTICAL MULTISTAGE CENTRIFUGAL PUMPS, CRN SERIES WITH TITANIUM INTERNALS AND MGE16...
ROSAND RH10
ROSAND RH10 ADVANCED CAPILLARY RHEOMETER MISSING A DIE SET WHICH CAN BE PURCHASED FROM NETZSCH WHO N...
PFEIFER DRAKO LTD 6X36WS-WC
PFEIFER DRAKO LTD 6X36WS-WC 60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG...
JP FLUID CONTROL AG-020-B
(33) UNITS INDUSTRIAL FLUID CONTROL & VALVE ACTUATORS. INCLUDES 8 X AG-020-B JP FLUID CONTROL ACTUAT...
1996 ATLAS 1604 SCRAP HANDLER
1996 ATLAS 1604 SCRAP HANDLER, 14,900 HOURS - HIGH CAB SCRAP HANDLER WITH HIGH CAB, LONG ARM, GOOD T...
25 HOT WIRE STRIPE HEATER
MACHINE 25 HOT WIRE STRIPE HEATER...
INSTRON 3520
2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES - 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON ...
23 HOT WIRE STRIP HEATER
MACHINE 23 HOT WIRE STRIP HEATER...
2017 DAF LF 150 FA
2017 DAF LF 150 FA WITH A FREEZER/ CHILLER UNIT AND TAIL LIFT FITTED. PLATING CERTIFICATE INCLUDED. ...
2022 IVECO 50C18
2022 IVECO 50C18 WITH VAN MOUNTED ACCESS PLATFORM, MEWP, 13,357 MILES. MOT TO 31ST JANUARY 2026. LAS...
2014 JCB TLT
2014 JCB TLT 3.5 TONNE DIESEL, 6893 HOURS, 4WD...
NEWFOIL 3000 MK2
NEWFOIL 3000 MK2 ROLL FED HOT FOIL STAMPER, EMBOSSER & DIE CUTTING MACHINE - THE NEWFOIL 3000 MK2 IS...
PRIMERA FX1200
PRIMERA FX1200 LABEL FINISHING SYSTEM. DIGITAL FINISHING SYSTEM TO DIGITALLY CUT LABELS TO ANY SIZE ...
GREEN MACHINE 424HS
GREEN MACHINE 424HS WALK BEHIND ROAD & YARD SWEEPER WITH RIDE ON CAB ATTACHMENT SPARES OR REPAIRS NO...
FOUNTAIN BASIN WITH ARABIC STYLE CALLIGRAPHY, POSSIBLY MARBLE OR RECONSTITUTED MARBLE
PFEIFER DRAKO LTD 6X36WS-WC
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG...
2018 RUIZHOU RZCRT5-2516
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516...
2020 UNIFY HIGH FREQUENCY MACHINE
2020 UNIFY HIGH FREQUENCY MACHINE. CONDITION: USED, GOOD....
WADKIN OVERHEAD CUT PRO 14
WADKIN OVERHEAD CUT PRO 14 CHOP SAW. 400 VOLT. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. GOOD WORK...
2023 GRUNDFOS
GRUNDFOS PUMP, NEVER BEEN INSTALLED, 0 RUNNING HOURS, FLOW RATE: 293.9M3/HR AT 71.2M, PORTS ARE CAPP...
HIROX HDX-20
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TON MACHINE...
1994 NISSHINBO HTP-1000
1994 NISSHINBO HTP-1000 CNC TURRET PUNCH PRESS CAPACITY: 22 TON 3 PHASE VOLTAGE: 415V S/N:...
AZ E-LITE LT8B-209E
AZ E-LITE AZCEL LT8B-E SERIES 2-FT T8 LED TUBES WITH STARTER/FUSE MODEL LT8B-209E (LIKELY ~9W), COLO...
1998 KING RICH INDUSTRIES KR-V2000
1998 KING RICH INDUSTRIES KR-V2000 VERTICAL TURRET MILLING MACHINE, BRIDGEPORT-STYLE MILL SUPPLY: 41...
2016 C404888
2016 67 CUBIC YARD TRI AXLE TIPPING TRAILER HALDEX BRAKES NEW PADS ALL ROUND NEW DISCS ON REAR AXLE ...
2025 BROUGHTON MCE 9.0-21E
2025 BROUGHTON MCE 9.0-21E MOBILE AIR CONDITIONER INCLUDING BLUE INSULATED BAG PREVIOUSLY USED AS A ...
2024 WCL STORAGE SYSTEMS PALLET RACKING
WCL STORAGE SYSTEMS PALLET RACKING, 9 BAYS / 27 EUROPALLET SPACES. TIMBER TOPS INCLUDED. INSTALLED O...
2024
SUPPORT PLATFORM MILD STEEL NON-ACCESSIBLE PLANT PLATFORM USED FOR SUPPORTING FILTRATION MACHINERY I...
2024 SYSTEMAIR MUB/T 062 630D4
2024 SYSTEMAIR CENTRIFUGAL BOX FAN, MUB/T 062 630D4 INDUSTRIAL SYSTEMAIR FAN DESIGNED TO EXTRACT AIR...
2024 PURIFIED AIR
4 X PURIFIED AIR ELECTROSTATIC PRECIPITATION (ESP) UNITS - GROUP OF 4 PURIFIED AIR ELECTROSTATIC PRE...
LOCAL EXHAUST VENTILATION 11
2015 MONTI ANTONIO 855
2015 MONTI ANTONIO THERMOPRINTING CALENDAR TRANSFER MACHINE MODEL 855 TENSION VAC 415-3-50 HZ TOTAL ...
ARCO XYZ150VS
ARCO PILLAR DRILL, DRILL PRESS, MODEL XYZ150VS, VARIABLE SPEED...
PP 31 TRANSPARENT
(2088) ROLLS CLEAR POLYPROPYLENE PACKING TAPE (PP 31 TRANSPARENT) 25MM X 330M PER ROLL. SUITABLE FOR...
BF80
BF80 CRUSHER BUCKET TO SUIT 20 TONNE MACHINE...
MARDEN EDWARDS MES 313
MARDEN EDWARDS MES 313 HIGH-SPEED OVERWRAPPING MACHINE. A PROFESSIONAL, HIGH-PRECISION OVERWRAPPING ...
MARDEN EDWARDS MES 700-80S
2000 MARDEN EDWARDS MES 700-80S INDUSTRIAL HEAT SHRINK TUNNEL, 230V. HEAVY-DUTY, PROFESSIONAL HEAT S...