Surplus Rubber Plastics Manufacturing Equipment

MACLEAN POWER SYSTEMS MBXH-82 MESSENGER BRACKET, WITH CABLE SIZE: 0.375"-0.750" OD, MESSENGER CABLE MATERIAL: STEEL, CABLE MOUNTING: CURVED CLAMPING GROOVE, CLAMP MOUNTING: (1) 3/4" BOLT (NOT INCLUDED), CABLE STANDOFF: 3"

LEXMARK X864DE MULTIFUNCTION PRINTER S/N: 240580, WITH 4024-FIN PRODUCT FINISHER, S/N: 15-28349 (16014)

AVTEC INDUSTRIES INC. EIDG COMMERCIAL APPLIANCE OUTLET CENTER POWER DISTRIBUTION, WITH ISLAND UTILITIES INCLUDING HOT WATER, COLT WATER, GAS, STEAM, VOLTS: 120/208 3-PHASE, AMPS: 100, GAS SERVICE (TOP PANEL) NPT: 1-1/2", AUTOMATIC GAS VALVE SOLENOID : ASCO 8215B70, AIR INERT GAS: 25 PSI/FUEL, GAS 25 PSI, SOLENOID VOLTS: 120/60 HZ, 110/50 HZ, MBH: 1350, HOT WATER (TOP PANEL) HOT WATER MAX PSIG: 40 PSIG/140 DEG., HOT WATER NPT: 1/2" COLD WATER (TOP PANEL) COLD WATER MAX PSIG: 40, COLD WATER NPT: 1/2", STEAM SUPPLY, STEAM NPT: 1-1/4" STEAM PSIG: 20,STEAM LBS./HR.: 1200, COND. RETURN NPT: 1", SIDE PANEL CONTROLS AND UTILITIES: MAIN SERVICE DISCONNECT: 40-AMP BREAKER, 10KA, 240 VOLT, VENTILATOR LIGHT: SWITCH BREAKER: 20-AMP, 10KA, 240 VOLT, GAS RESET STATION: RESET BUTTON & ALARM SPEAKER, REMOTE STATUS LIGHT INDICATOR LIGHT QTY.: 6 (ELECTRIC RESET AT EACH BREAKER), POWER INDICATOR LIGHT, GFCI 120 VOLT POWER OUTLET, 15-AMP BREAKER, 10KA, 240 VOLT, BOTTOM CONTROLS AND UTILITIES, FRYER ELECTRICAL HOOK UP: MODEL: EN30C2, S/N 3E, GROUND FAULT: LIGHT INDICATOR & RESET BUTTON BREAKER: 30-AMP, 10KA, 240 VOLT, GFCI 120 VOLT POWER OUTLET BREAKER: 15-AMP, 10KA, 240 VOLT, UTILITY LINES: HOT WATER, COLD WATER GAS LINE NPT: 3/4", CONDENSATE RETURN NPT: 1/2", STEAM SUPPLY NPT: 3/4"

AUTOMATIC STRAPPING MACHINE AP-300-LT, WITH WORKING PLATFORM DIMENSIONS: 59" L X 27.5" W, OVERALL DIMENSIONS: 88.5" L X 27.5" W X 65.5" H, WITH GOLDSTAR 10-6-907 1/2 HP MOTOR, 4-POLE, 60 HZ, 220/380 VOLT, 2.2/1.27 AMPS, 1,730 RPM, 3-PHASE, (2) GOLDSTAR 10-6-978 1/4 HP MOTORS, 4-POLES, 220/380 VOLT, 1.2/0.7 AMP, 60 HZ, 1,720 RPM, 3-PHASE (S/N: 15589)

AUTOMATIC STRAPPING MACHINE AP-300-LT S/N: NV985508, WITH WORKING PLATFORM DIMENSIONS: 59.25" L X 28" W, OVERALL DIMENSIONS: 90" L X 28" W X 65.75" H, LG 0400K1TBBL 1/2 HP MOTOR, 4-POLE, 60 HZ, 220/380 VOLT, 2.0/1.15 AMP, 1,700 RPM, 3-PHASE, (2) LG 0200K7TB 1/4 HP MOTOR, 4-POLE, 220/380 VOLT, 1.1/0.64 AMP, 60 HZ, 1,720 RPM, 3-PHASE

BRACKER AG RADIAL RN201 RIVETING MACHINE WITH 460 VOLT, 3-PHASE

CUSTOM 3-SPINDLE DRILLING MACHINE, WITH OVERALL DIMENSIONS: 42" X 61" X 84", BALDOR MOTOR, S/N W1710202275, CATALOG NUMBER: CDP3455, SPEC. NUMBER: 34-5990-3865, 1,750 RPM, 56C FRAME, TYPE 3435P, 180 VOLT, 5 AMPS

INDUSTRIAL PRESS MACHINE WITH OVERALL DIMENSIONS: 25" X 33" X 63", WEIGHT: 430 LBS., BANNER ENGINEERING MSCA-1 CONTROL, RATED 115 VOLT AC, 50/60 HZ, RATED SUPPLY CURRENT: 400 MA AC MAX, FUSE RATING: 500 MA AC, 250V AC S/N: 14394

1999 KAWATA CDA150U H200-4SW30C CHALLENGER II PLASTIC RESIN DRYER, TYPE: DA-150, 180 MAX AIR VOLUME, 330 LB. HOPPER CAPACITY, 208 VOLT POWER SOURCE, TOTAL CAPACITY: 17.335 KW/23.24 HP, HEATER CAPACITY: 6 KW/8 HP, DRY BLOWING CAPACITY: 1.9 KW/2.5 HP, CONVEYING BLOWER CAPACITY: 1.9 KW/2.5 HP S/N: DB5100060

STI MC47SR-30-450-X, MC47-30-450-R INDUSTRIAL WORK STATION, WITH OVERALL DIMENSIONS: 31" X 45" X 82", WEIGHT: 422 LBS. S/N: 14396

INJECTION SCREW BARREL CYLINDER, WITH 101-1.2" LENGTH, 9-1/4" WIDTH, 1" SCREW HOLES, 3-1/2" PIPE HOLE (10389)

1999 KAWATA CDA200U H400-4SW60C CHALLENGER II PLASTIC RESIN DRYER, S/N: DB5100370, MAX AIR VOLUME: 270 M3/H, HOPPER CAPACITY: 670 LITER, POWER SOURCE: 208 VOLT, TOTAL CAPACITY: 23.995 KW, HEATER CAPACITY: 9 KW, DRY BLOWING CAPACITY: 3.4 KW, CONVEYING BLOWER CAPACITY: 1.9 KW, TOWA SEIDEN ROTARY PADDLE LEVEL SWITCH TYPE: HL-221 (14729)

4" X 104" SHEARING HYDRAULIC CYLINDER (10517)

4" X 101" SHEARING HYDRAULIC CYLINDER (10095)