Late Model CNC Machinery from a Canadian Prototyping Machine Shop

2009 MATSUURA H.PLUS-405 EXTENDED STROKE FULL 4-AXIS HORIZONTAL MACHINING CENTER W/ 20K RPM SPINDLE. TRAVELS: X-AXIS TRAVEL: 25.98" (660 MM), Y-AXIS TRAVEL: 25.98" (660 MM), Z-AXIS TRAVEL: 25.98" (660 MM). PALLET SIZE: 19.68" X 19.68" (500 MM X 500 MM). NUMBER OF PALLETS: 2. MAX. WORKPIECE SIZE: ~ 27.5" X 33.4" H ( 700 MM X 850 MM). MAX. PALLET LOAD: 1,100 LBS (500 KG). B-AXIS INDEXING: 0.001 (FULL 4TH AXIS). SPINDLE (40-TAPER): SPEED: 20,000 RPM, MOTOR: 35 HP (26 KW), TAPER: CAT 40, DRIVE SYSTEM: DIRECT DRIVE / CORE-COOLED BALL SCREWS. AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 90 STATIONS, MAX TOOL LENGTH: 13.77" (350 MM), MAX TOOL WEIGHT: 22 LBS (10 KG), TOOL CHANGE TIME: 1.3 SECONDS (TOOL-TO-TOOL). MOTION & FEEDRATES: RAPID TRAVERSE (X/Y/Z): 1,968 IPM (50 M/MIN), CUTTING FEEDRATE: 1,968 IPM (50 M/MIN), B-AXIS ROTATION SPEED: 100 RPM. GENERAL MACHINE DATA: CONTROL SYSTEM: MATSUURA G-TECH 30I, POWER REQUIREMENT: 62 KVA 200/220V 50/60HZ 3PH 179A. EQUIPPED WITH: 20,000 RPM SPINDLE, 90 POSITION RACK TYPE AUTO TOOL CHANGER, COOLANT THROUGH SPINDLE (300 PSI), OVERHEAD COOLANT FLUSHING, 3 COLOR PATROL LIGHT, RENISHAW NC-4 TOOL MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE), RENISHAW IN-PROCESS MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE), DATASERVER, UPGRADED CHIP EVACUATION INCLUDING REAR DISCHARGE CONVEYOR AND TANK, 4TH AXIS ROTARY TABLE, TRANSFORMER, (2) 500MM PALLETS, MIST BLASTER & MOUNTING TOWER. S/N: 18043

2009 MATSUURA H.PLUS-405 EXTENDED STROKE FULL 4-AXIS HORIZONTAL MACHINING CENTER W/ 20K RPM SPINDLE. TRAVELS & WORK ENVELOPE: X-AXIS TRAVEL: 25.98" (660 MM), Y-AXIS TRAVEL: 25.98" (660 MM), Z-AXIS TRAVEL: 25.98" (660 MM). PALLET SIZE: 19.68" X 19.68" (500 MM X 500 MM). NUMBER OF PALLETS: 2. MAX. WORKPIECE SIZE: ~ 27.5" X 33.4" H ( 700 MM X 850 MM). MAX. PALLET LOAD: 1,100 LBS (500 KG). B-AXIS INDEXING: 0.001 (FULL 4TH AXIS). SPINDLE (40-TAPER): SPINDLE SPEED: 20,000 RPM. SPINDLE MOTOR: 35 HP (26 KW). SPINDLE TAPER: CAT 40. DRIVE SYSTEM: DIRECT DRIVE / CORE-COOLED BALL SCREWS. AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 90 STATIONS. MAX TOOL LENGTH: 13.77" (350 MM). MAX TOOL WEIGHT: 22 LBS (10 KG). TOOL CHANGE TIME: 1.3 SECONDS (TOOL-TO-TOOL). MOTION & FEEDRATES: RAPID TRAVERSE (X/Y/Z): 1,968 IPM (50 M/MIN). CUTTING FEEDRATE: 1,968 IPM (50 M/MIN). B-AXIS ROTATION SPEED: 100 RPM. GENERAL MACHINE DATA: CONTROL SYSTEM: MATSUURA G-TECH 30I. POWER REQUIREMENT: 62 KVA 200/220V 50/60HZ 3PH 179A. EQUIPPED WITH: 20,000 RPM SPINDLE, 90 POSITION RACK TYPE AUTO TOOL CHANGER, COOLANT THROUGH SPINDLE (300 PSI), OVERHEAD COOLANT FLUSHING, 3 COLOR PATROL LIGHT, RENISHAW NC-4 TOOL MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE), RENISHAW IN-PROCESS MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE), DATASERVER, UPGRADED CHIP EVACUATION INCLUDING REAR DISCHARGE CONVEYOR AND TANK, 4TH AXIS ROTARY TABLE, TRANSFORMER (2) 500MM PALLETS, MIST BLASTER & MOUNTING TOWER. S/N: 18044

2010 MATSUURA H.PLUS-405 HORIZONTAL MACHINING CENTER SN: 18245 TRAVELS & WORK ENVELOPE X-AXIS TRAVEL: 25.98 INCH (660 MM) Y-AXIS TRAVEL: 25.98 INCH (660 MM) Z-AXIS TRAVEL: 25.98 INCH (660 MM) PALLET SIZE: 19.68 INCH X 19.68 INCH (500 MM X 500 MM) NUMBER OF PALLETS: 2 MAX. WORKPIECE SIZE: ~ 27.5 INCH X 33.4 INCH H ( 700 MM X 850 MM) MAX. PALLET LOAD: 1,100 LBS (500 KG) B-AXIS INDEXING: 0.001 (FULL 4TH AXIS) SPINDLE (40-TAPER) SPINDLE SPEED: 20,000 RPM SPINDLE MOTOR: 35 HP (26 KW) SPINDLE TAPER: CAT 40 DRIVE SYSTEM: DIRECT DRIVE / CORE-COOLED BALL SCREWS AUTOMATIC TOOL CHANGER (ATC) CAPACITY: 90 STATIONS MAX TOOL LENGTH: 13.77 INCH (350 MM) MAX TOOL WEIGHT: 22 LBS (10 KG) TOOL CHANGE TIME: 1.3 SECONDS (TOOL-TO-TOOL) MOTION & FEEDRATES RAPID TRAVERSE (X/Y/Z): 1,968 IPM (50 M/MIN) CUTTING FEEDRATE: 1,968 IPM (50 M/MIN) B-AXIS ROTATION SPEED: 100 RPM GENERAL MACHINE DATA CONTROL SYSTEM: MATSUURA G-TECH 30I POWER REQUIREMENT: 62 KVA 200/220V 50/60HZ 3PH 179A EQUIPPED WITH: 20,000 RPM SPINDLE 90 POSITION RACK TYPE AUTO TOOL CHANGER COOLANT THROUGH SPINDLE (300 PSI) OVERHEAD COOLANT FLUSHING 3 COLOR PATROL LIGHT RENISHAW NC-4 TOOL MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE) RENISHAW IN-PROCESS MEASURING SYSTEM (COMPLETE EXCEPT FOR A PROBE) DATASERVER (1GB) UPGRADED CHIP EVACUATION INCLUDING REAR DISCHARGE CONVEYOR AND TANK 4TH AXIS ROTARY TABLE TRANSFORMER (2) 500MM PALLETS MIST BLASTER & MOUNTING TOWER

2009 MATSUURA PC-52 LINEAR PALLET SYSTEM INCLUDES 44 PALLETS, & TRANSFORMER MACHINE HAS 52 PALLET POSITIONS PALLET DIMENSIONS (EACH): 19.5-INCH X 19.5-INCH (500MM X 500MM) 200/220V 50/60 HZ 3 PH 14 KVA 41A

2004 HAAS VF-4SS VERTICAL MACHINING CENTER W/ 4TH AXIS DRIVE & WIRING, 12K RPM SPINDLE. TRAVELS: X-AXIS 50 INCH, Y-AXIS 20 INCH, Z-AXIS 25 INCH. TABLE SIZE: 52 INCH X 18 INCH. MAX WEIGHT ON TABLE: 3,500 LBS. SPINDLE NOSE TO TABLE: 4 INCH TO 29 INCH. SPINDLE SPEED: 12,000 RPM. DRIVE SYSTEM: INLINE DIRECT-DRIVE. SPINDLE MOTOR: 30 HP VECTOR DRIVE. SPINDLE TAPER: CAT 40. SPINDLE TORQUE: 90 FT-LB @ 2,000 RPM. AUTOMATIC TOOL CHANGER: SIDE-MOUNT TWIN-ARM, 24+1 STATIONS. MOTION & FEEDRATES: RAPID TRAVERSE (X/Y/Z): 1,400 IPM. MAX CUTTING FEEDRATE: 833 IPM. 4TH AXIS: FULL AC BRUSHLESS DRIVE & WIRING INCLUDED. EQUIPPED WITH: TRANSFORMER, RIGID TAPPING, HIGH INTENSITY LIGHTING, AUGER CHIP CONVEYOR, PROGRAMMABLE COOLANT NOZZLE, QUICK CODE PROGRAMMING, SPINDLE ORIENTATION, 4TH AXIS DRIVE & WIRING ONLY, COORDINATE ROTATION & SCALING, REMOTE JOB HANDLE, USER DEFINABLE MACROS, HIGH SPEED MACHINING, MIST BLASTER. S/N: 36415

2004 HAAS VF-4D VERTICAL MACHINING CENTER W/15K RPM SPINDLE, 4TH AXIS DRIVE, RIGID TAPPING, TRAVELS & TABLE X-AXIS TRAVEL: 50" Y-AXIS TRAVEL: 20" Z-AXIS TRAVEL: 25" TABLE SIZE: 52" X 18" MAX WEIGHT ON TABLE: 3,500 LBS SPINDLE NOSE TO TABLE: 4.0" TO 29.0" SPINDLE SPINDLE SPEED: 15,000 RPM DRIVE SYSTEM: INLINE DIRECT-DRIVE SPINDLE MOTOR: 20 HP DUAL DRIVE SPINDLE TAPER: CAT 40 AUTOMATIC TOOL CHANGER (ATC) CAPACITY: 24+1 STATIONS TOOL CHANGE TIME: ~2.3 SECONDS MOTION & FEEDRATES RAPID TRAVERSE (X/Y/Z): 1,000 IPM MAX CUTTING FEEDRATE: 500 IPM 4TH AXIS: FULL AC BRUSHLESS DRIVE & WIRING EQUIPPED WITH: TRANSFORMER 15,000 RPM SPINDLE, 20HP DUAL DRIVE HIGH INTENSITY LIGHTING HIGH SPEED MACHINING CHIP CONVEYOR PROGRAMMABLE COOLANT NOZZLE QUICK CODE PROGRAMMING SPINDLE ORIENTATION 4TH AXIS DRIVE & WIRING COORDINATE ROTATION & SCALING REMOTE JOB HANDLE MACROS RIGID TAPPING 20-POSITION COOLANT SPIGOT S/N: 36417

MITUTOYO PH-A14 OPTICAL PROFILE PROJECTOR W/ QM-DATA 200 CONTROLLER. PROTRACTOR SCREEN: 14 INCH (356MM) FINE GROUND GLASS WITH CROSS-HAIR LINES. VERNIER READING, RESOLUTION: 2' ILLUMINATION: 24V, 150W HALOGEN LAMP, TELECENTRIC ILLUMINATION 24V, 150W HALOGEN LAMP, TWIN FIBER-OPTIC ILLUMINATOR MAGNIFICATIONS: 10X (STANDARD), 20X, 50X, 100X (OPTION) WORKSTAGE (X-AXIS): 8 INCH (203.2MM) 16 INCH X 6 INCH (407 X 153MM) LINEAR SCALE .00005 INCH (0.001MM)*1 (Y-AXIS): 4 INCH (101.6MM) LINEAR SCALE .00005 INCH (0.001MM) (Z-AXIS): 2 INCH (50.8MM) MAX LOAD: 100LBS (45.37KG) POWER SUPPLY: 120VAC, 50/60HZ DIMENSION (W X D X H): 24.1 INCH X 48.8 INCH X 45.6 INCH (612 X 1240 X 1158MM) WEIGHT: 308LBS (140KG) S/N: 601023

CLARK ECX25 4,800 LB CAPACITY ELECTRIC FORKLIFT W/ SIDESHIFT & CHARGER. RATED CAPACITY: 4,800 LBS @ 24" LOAD CENTER. VOLTAGE: 36V. MAX TRAVEL SPEED: ~9.3 MPH (LOADED) / ~10.0 MPH (EMPTY). LIFT SPEED: ~57 FPM (LOADED) / ~94 FPM (EMPTY). TILT ANGLE: 5 FORWARD / 5 BACK. S/N: ECX360-1434-9653 KF

HYD-MECH ENGINEERING S-20A AUTOMATIC HORIZONTAL PIVOT BAND SAW W/ FEED TABLE. CUTTING CAPACITY (90) RECTANGULAR: 13" H X 18" W (330 X 457 MM) ROUND: 13" (330 MM) WORK LOAD CAPACITY: 5,000 LBS (2,272 KG). MITER CUTTING CAPACITY AT 45: 13" H X 10.75" W (ROUND: 12") AT 30: 13" H X 7.75" W (ROUND: 8.5") HEAD SWING: 0 TO 60 (SINGLE DIRECTION). SHUTTLE & FEEDING SHUTTLE STROKE: 27" (685 MM) IN A SINGLE STROKE. COOLANT TANK: 12 GALLONS (45 LITERS) TABLE HEIGHT: 32". S/N: 80200815

2002 HAAS VF-3D VERTICAL MACHINING CENTER W/4TH AXIS DRIVE, MIST BLASTER, 10K RPM SPINDLE, RIGID TAP. SPECIFICATIONS: TRAVELS & TABLE X-AXIS TRAVEL: 40 INCH (1,016 MM) Y-AXIS TRAVEL: 20 INCH (508 MM) Z-AXIS TRAVEL: 25 INCH (635 MM) TABLE SIZE: 48 INCH X 18 INCH MAX WEIGHT ON TABLE: 3,500 LBS SPINDLE NOSE TO TABLE: 4 INCH - 29 INCH. SPINDLE & DRIVE SPINDLE SPEED: 10,000 RPM SPINDLE MOTOR: 20 HP HIGH-TORQUE VECTOR DRIVE SPINDLE TAPER: CAT 40. AUTOMATIC TOOL CHANGER CAPACITY: 24+1 STATIONS TOOL CHANGE TIME: ~2.3 SECONDS (TOOL-TO-TOOL). MOTION & FEEDRATES RAPID TRAVERSE (X/Y/Z): 1,000 IPM MAX CUTTING FEEDRATE: 500 IPM 4TH AXIS: FULL AC BRUSHLESS DRIVE & WIRING INCLUDED. EQUIPPED WITH: RIGID TAPPING 10,000 RPM SPINDLE, 20 HP DUAL DRIVE (Y-DELTA) AUTO AIR GUN BRUSHLESS FOURTH AXIS DEVICE PROGRAMMABLE COOLANT SPIGOT COORDINATE ROTATION & SCALING MACROS CHIP CONVEYOR HAAS REMOTE JOG HANDLE AIR BLAST TRANSFORMER (600V TO 230V) MIST BLASTER S/N: 29718

50 HORSEPOWER GARDNER DENVER HYDROVANE HV37RS-460 ROTARY VANE AIR COMPRESSOR - RATED HORSEPOWER: 50 HP MAXIMUM PRESSURE 150 PSI POWER: 460V 3PH 60HZ FLA: 71.8A TOTAL ON HOURS: 11,195 TOTAL RUN HOURS: 7,356 S/N: V37-000144-0905

HAAS 4-SPINDLE ROTARY INDEXER

HAAS 4TH AXIS ROTARY INDEXER W/ TAILSTOCK

MITUTOYO LH-600 LINEAR HEIGHT GAUGE W/ QM-DATA 100 CONTROLLER MEASURING RANGE TOTAL RANGE: 0-38 INCH (0-972 MM) SLIDER STROKE: 24 INCH (600 MM) DRIVE METHOD: MOTORIZED (7 STEPS: 5, 10, 15, 20, 25, 30, 40 MM/S) OR MANUAL MEASURING FORCE: 1N (AUTOMATIC CONSTANT FORCE) BASE MOVEMENT: PNEUMATIC FLOATING SYSTEM (BUILT-IN COMPRESSOR) FLOATING MODES: FULL-FLOAT (FOR TRAVEL) / SEMI-FLOAT (FOR MEASURING WHILE MOVING) S/N: 100160708

BIN OF SPARE RECEIVER PLATES & MACHINING BASES

2000 HAAS SL-20 CNC LATHE - C AXIS CAPABLE, PARTS CATCHER, RIGID TAPPING, HIGH PRESSURE COOLANT. CAPACITIES MAX CUTTING DIAMETER: 10.3 INCH (262 MM) MAX CUTTING LENGTH: 20.0 INCH (508 MM) SWING DIAMETER (OVER FRONT APRON): 23.0 INCH SWING DIAMETER (OVER CROSS SLIDE): 9.5 INCH DISTANCE BETWEEN CENTERS: 24.0 INCH SPINDLE & C-AXIS SPINDLE SPEED: 4,000 RPM SPINDLE MOTOR: 20 HP VECTOR DRIVE SPINDLE NOSE: A2-6 DRAW TUBE BORE (BAR CAPACITY): 2.0 INCH (51 MM) C-AXIS INDEXING: 0.001 SPINDLE TORQUE: 154 FT-LB @ 650 RPM FEEDRATES & MOTION RAPID TRAVERSE (X-AXIS): 710 IPM RAPID TRAVERSE (Z-AXIS): 945 IPM MAX THRUST (X-AXIS): 3,375 LB MAX THRUST (Z-AXIS): 7,650 LB EQUIPPED WITH: FULLY PROGRAMMABLE HYDRAULIC TAILSTOCK LIVE TOOILNG CAPABLE HAAS TURRET AUTO DOOR C-AXIS, GEAR DRIVEN WITH FULL INTERPOLATION HIGH PRESSURE COOLANT SYSTEM (300 PSI) HAAS CHIP AUGER QUICK CODE PROGRAMMING SYSTEM BAR FEED INTERFACE SINDLE ORIENTATION USER DEFINABLE MACROS TOOL PRESETTER SYSTEM PARTS CATCHER SYSTEM MIST COLLECTOR & MOUNTING TOWER TRANSFORMER TOOLING S/N: 62599

HAAS 4-SPINDLE ROTARY INDEXER W/ SPARE FIXTURE AND ACCESSORIES

30 HORSEPOWER AIRTEK HT27 240 DOUBLE STAGE HORIZONTAL AIR COMPRESSOR W/ AUXILLARY TANK & TRANSFORMER. 30 HP 575 V 1775 RPM 28.8 A.

11 DRAWER LISTA CABINET W/ CONTENTS 55"T X 56"W X 29"D

LARGE CAT40 TOOL HOLDER & TOOLING CABINET W/ ALL CONTENTS - NIKKEN PROBE & OVER 100 TOOL HOLDERS CABINET DIMENSIONS: 71"W X 37"D X 89"T TOOLING, TOOL HOLDERS, PROBE & CABINET ARE ALL INCLUDED.

COMPAIR AIR DRYER 220V 1PH 60HZ

LANG QUICK POINT 47520 5-SIDED MACHINING BASE

2000 HAAS VF-3D VERTICAL MACHINING CENTER W/ 15K RPM SPINDLE, 4TH AXIS DRIVE, 32 TOOL ATC, HSM. TRAVELS & TABLE: X-AXIS TRAVEL: 40 INCH, Y-AXIS TRAVEL: 20 INCH, Z-AXIS TRAVEL: 25 INCH. TABLE SIZE: 48 INCH X 18 INCH. MAX WEIGHT ON TABLE: 3,500 LBS. SPINDLE NOSE TO TABLE: 4 INCH - 29 INCH. SPINDLE SPEED: 15,000 RPM. SPINDLE MOTOR: 20 HORSEPOWER VECTOR DUAL DRIVE. SPINDLE TAPER: CAT 40. AUTOMATIC TOOL CHANGER (ATC) CAPACITY: 32 TOOL. MOTION & FEEDRATES: RAPID TRAVERSE (X/Y/Z): 1,000 IPM. MAX CUTTING FEEDRATE: 500 IPM. 4TH AXIS: FULL AC BRUSHLESS DRIVE INTERFACE (4AXAC). ELECTRICAL: 208/230 V 3 PH 50/60 HZ. EQUIPPED WITH: 15,000 RPM SPINDLE, 20-HP DUAL DRIVE, 32 TOOL CHANGER OPTION, HIGH SPEED MACHINING, BRUSHLESS CONVERSION, QUICK CODES, SPINDLE ORIENTATION, 4TH AXIS DRIVE, COORD.ROTATION/SCALING, TRANSFORMER, RIGID TAPPING. S/N: 19922

10 DRAWER LISTA CABINET W/CONTENTS 55"T X 56"W X 28"D DOES NOT INCLUDE TOP CABINET, SEE LOT 253

11 DRAWER LISTA CABINET W/ CONTENTS 55"T X 28"W X 29"D

2005 DAREX XT3000 SHARPNER/GRINDER W/ SPARE FIXTURES & ACCESSORIES. CAPACITIES DRILL DIAMETER RANGE: 3 MM (.118") TO 21 MM (.826"). DRILL LENGTH: MINIMUM 2.0" (MAXIMUM IS UNLIMITED). POINT ANGLES: 118 TO 150 (INFINITELY ADJUSTABLE). POINT STYLES: STANDARD CONIC AND SPLIT POINT. MOTOR: 1/4 HP, SPEED: 2,850 RPM. POWER (115V): 2.5 AMPS, POWER (230V): 1.6 AMPS (50/60HZ). MACHINE SIZE: 20" X 20" X 16" (51 X 51 X 41 CM). MACHINE WEIGHT: 68 LBS (31 KG). S/N: 4926A

LANG MAKRO GRIP 47205 5" MACHINE VISE

LANG MAKRO GRIP 47205 5" MACHINE VISE

REGO-FIX BMT-200 TOOL BALANCING MACHINE W/ DIGITAL CONTROLS. GRAPHICAL TOUCH SCREEN DISPLAY SIZE 240 X 128 PIXEL. UNBALANCE CORRECTION ANGULAR, DRILLING AXIAL, DRILLING RADIAL, FIXED POSITION AND MILLING INCLUDED. DIRECT PRINTER CONNECTION PRINT DIRECTLY FROM THE DISPLAY NO ADDITIONAL PC CONNECTION NECESSARY. AUTOMATIC POSITIONING AUTOMATIC ALIGNMENT OF BALANCING POSITION ABILITY TO SELECT AND ALIGN TO THE LIGHT OR HEAVY SIDE DURING BALANCING FOR THE ANGULAR METHOD EACH DESIRED ANGLE CAN BE SELECTED DIRECTLY FROM THE SCREEN. S/N:

LANG MAKRO GRIP 47205 5" MACHINE VISE

10 DRAWER LIST CABINET W/ CONTENTS 42"T X 32"W X 28"D

2000 MILLER SYNCHROWAVE 250 TIG WELDER INPUT VOLTS: 230/460/575 AMPERES: 92/46/36.8 KW: 11.4 1 PH 60HZ S/N: KF812529

1999 HAAS VF-3 VERTICAL MACHINING CENTER W/ 4TH AXIS INTERFACE, 10K RPM SPINDLE, RIGID TAPPING. TRAVELS & TABLE: X-AXIS TRAVEL: 40 INCH Y-AXIS TRAVEL: 20 INCH Z-AXIS TRAVEL: 25 INCH TABLE SIZE: 48 INCH X 18 INCH MAX WEIGHT ON TABLE: 3,500 LBS SPINDLE NOSE TO TABLE: 4.0 INCH - 29.0 INCH. SPINDLE: SPINDLE SPEED: 10,000 RPM SPINDLE MOTOR: 20 HP (VECTOR DRIVE) SPINDLE TAPER: CAT 40 SPINDLE TORQUE: 250 FT-LB @ 450 RPM. AUTOMATIC TOOL CHANGER (ATC) TYPE: SIDE-MOUNT TWIN-ARM TOOL CAPACITY: 32 STATIONS MAX TOOL DIAMETER: 3.0 INCH (FULL) / 6.0 INCH (ADJACENT EMPTY) MAX TOOL WEIGHT: 12 LBS TOOL CHANGE TIME: ~2.8 SECONDS (TOOL-TO-TOOL). MOTION & FEEDRATES: RAPID TRAVERSE (X/Y/Z): 710 IPM MAX CUTTING FEEDRATE: 500 IPM 4TH AXIS: FULLY INTERFACED. ELECTRICAL: 208/230 V 3 PH 50/60 HZ. EQUIPPED WITH: RIGID TAPPING 10,000 RPM SPINDLE CHIP AUGER PROGRAMABLE COOLANT 4TH AXIS INTERFACE 32 TOOL ATC TRANSFORMER. S/N: 17228

MILLER DETAWELD 300 MIG WELDER W/ MILLER S-22A WIRE FEED INPUT VOLTS: 230/460/575 AMPERES: 42/21/16.8 KW: 12.3 3PH 60HZ OUTPUT 32V 300A 100% DUTY CYCLE S/N: KF784107

LANG MAKRO GRIP 47255 5" MACHINE VISE

7 DRAWER LISTA CABINET W/ CONTENTS 59 INCH T X 28 INCH W X 28 INCH D

LANG MAKRO GRIP 47120 3" MACHINE VISE

8-FACED FIXTURE BLOCK/TOMBSTONE. FACE DIMENSIONS (EACH) 8"W X 28.75"H (31" OF TOTAL HEIGHT AVAILABLE). ATTACHED HOLDING FIXTURES INCLUDED WITH TOMBSTONE.

LANG MAKRO GRIP 47120 3" MACHINE VISE

BIN OF REGO-FIX TOOL HOLDERS W/ TOOLING - PG STYLE, CAT40 APPROX 19 INCH

2" MACHINE VISE - LANG MAKRO GRIP 47065 2" MACHINE VISE

8-FACED FIXTURE BLOCK/TOMBSTONE. FACE DIMENSIONS (EACH) 8"W X 28.75"H (31" OF TOTAL HEIGHT AVAILABLE). ATTACHED HOLDING FIXTURES INCLUDED WITH TOMBSTONE.

8-FACED FIXTURE BLOCK/TOMBSTONE. FACE DIMENSIONS (EACH) 8"W X 28.75"H (31" OF TOTAL HEIGHT AVAILABLE). ATTACHED HOLDING FIXTURES INCLUDED WITH TOMBSTONE.

LANG MAKRO GRIP 47120 3" MACHINE VISE

LANG MAKRO GRIP 47120 3" MACHINE VISE

ULTRAMATIC PORTABURR3 DEBURRING MACHINE W/ MEDIA 3/4 HP 115V 1PH 1550 RPM

LANG MAKRO GRIP 47065 2" MACHINE VISE

LANG MAKRO GRIP 47065 2" MACHINE VISE

BIN OF REGO-FIX TOOL HOLDERS W/TOOLING - VARIOUS STYLES, CAT40 APPROX 13"

32 REGO-FIX & TECHNIKS CAT40 TOOL HOLDERS, VARIOUS SYTLE COLLETS, MOSTLY ER