Nutra Manufacturing Packaging Equipment

C02 SUPERCRITICAL EXTRACTION MACHINE - 1- USED C02 SUPERCRITICAL EXTRACTION MACHINE 50L EXTRACTION MACHINE WITH DUAL PUMPS (GAS AND LIQUID PUMPS), A DUAL VESSEL SWIVEL SYSTEM, AUTOMATION, GRAY POWDER COATING WITH BLUE ACCENTS. MDL: DP200050LA S/N: DP50LA-00001 CONSTRUCTION: 316 STAINLESS STEEL - FRAME, CYLINDERS, ALL ITEMS BESIDES CLOSURES (CAST STEEL), 316 STAINLESS STEEL LINES ALL FITTINGS: SWAGELOK DUAL HASKEL PRESSURE PUMP PLC CONTROL / FULLY AUTOMATED W SMART TECHNOLOGY 60L EXTRACTION VESSEL W 90 DEGREE ROTATION MAX OPERATING PRESSURE 3,000 PSI HOUR METER: 745.6 ELECTRICAL AND PLC DONE BY DRUK ENGINEERING DUAL SEPARATION VESSELS 240 VOLT EMERGENCY SHUT OFF HYDRAULIC LIFT CLOSURE INCLUDED EQUIPMENT POLAR AIR - ROTARY SCREW AIR COMPRESSOR MDL: PRV020PKG3 S/N: 174018-EVO-F JOB#: 20116 MOTOR: 20HP / 14.91 KM PHASE: 3 POWER SUPPLY: 208 V / 50-60 HZ MOTOR CURRENT: 50.56 / AMPS MAX PRESSURE: 145 PSI / 9.98 BAR TEMP RANGE: 32-115 F / 0-47 C CONTROL TYPE: VARIABLE SPEED DRIVE POLAR AIR - REFRIGERATED AIR DRYER MODEL#: PDRCF1150115 SERIAL#: 2816MA11206 CFM#: 115 CFM MAX REFRIGERANT PRESSURE: 25 BAR MAX AIR PRESSURE: 230 PSIG / 16 BAR MAX AIR INLET TEMP: 150 F / 65 C MAX AMBIENT TEMP: 120 F / 49 C MIN AMBIENT TEMP: 40 F / % C MAX AMPER: 19 A FUSE AMPER: 20 A W & Z MACHINERY SYSTEMS - INDUSTRIAL CHILLER MODEL#: HC-03PACI SERIES#: 1605050 SOURCE: 220V / 60HZ POWER: 3.5 KW WEIGHT: 190 KG DATE ISSUED: 16.05 / MADE IN CHINA

SCHAEFER MODEL 10 CAPSULE FILLER - 1 USED SEMI AUTOMATIC SCHAEFER MODEL 10 CAPSULE MODEL: 10 CAPACITY: 25,000 CAPS/HR VOLTS: 208 CYCLES: 60 BAR: 8.5 PHASE: 3 AIR SUPPLY: 3CF/MIN @80-100 PSI TOOLING: GENERAL INFO: SCHAEFER TECHNOLOGIES TYPE 10 SEMI-AUTOMATIC CAPSULE FILLER. FILLING CAPACITY UP TO 25,000 CAPSULES PER HOUR DEPENDENT UPON VOLUME PER RING ,FILLING CONDITIONS AND OPERATOR EXPERIENCE. UNIT IS SELF-CONTAINED W/VACUUM PUMP, AUGER DRIVEN POWDER FILLING STATION, AND PNEUMATIC CLOSING STATION. ELECTRICAL 220 VOLTS 3PH, AIR SUPPLY NEEDED 3CF/MIN @80 TO 100 PSI. MACHINE COMES WITH A SET OF 0, AND 00 CHANGE PARTS

PHARMAFILL CS10 DUAL HEAD COTTON INSERTER MACHINE. WEIGHT: 850 LB. VOLTS: 110. CYCLES: 60. AMPS: 2. S/N: 1018

2006 NORDENMATIC NM402-HA TUBE FILLER S/N: 54278 PHASE: 3 HZ: 60 VOLTS: 220 AMPS: 25 FEATURES: - PRODUCTION CAPACITY: 40 TPM - FILLING VOLUME: 1-300 ML - TUBE LENGTH(STD): 50-250 MM - TUBE DIAMETER: 10-50 MM (PE) - 10-40 MM (AL) GENERAL INFO: THE FULL-SIZE OPENING OF THE FRONT GUARD PROVIDES EXCELLENT ACCESS FOR MAINTENANCE AND CHANGEOVERS OF THIS TUBE FILLING MACHINE FOR REQUIRED OUTPUTS OF 40 TPM. THE TUBE PRINT ORIENTATION SYSTEM GUARANTEES THE FIRST-RATE ACCURACY OF ALL TUBES. NM402 HAS AN OPERATOR-FRIENDLY TOUCH SCREEN PANEL - LOGICAL AND EASY TO READ. THE CONTROL SYSTEM ALLOWS UP TO 30 PRE-PROGRAMMED FORMAT TABLES THAT, TOGETHER WITH IMPROVED ACCESS FOR MAINTENANCE, REDUCE THE CHANGEOVER TIME TO A MINIMUM.

1998 SWIFTPACK B12P3PTS COUNTER VOLTS: 120 PHASE: 1 S/N: M2426/7 HZ: 60 KW: 3.25 GENERAL INFO: USED SWIFTPACK DT INDUSTRIES DUAL LANE COUNTER, MODEL B123PTS, SPEEDS UP TO 80 BPM, STAINLESS STEEL CONSTRUCTION, DUAL HEAD, 12 LANES PER HEAD WITH FEED HOPPERS, WITH HMI, WITH DT KALISH PHARMAVEYOR, APPROXIMATELY 7.5" WIDE X 207" OVERALL LENGTH, WITH LANE DIVERTER, BOTTLE STOPS AND INDIVIDUAL LANE REJECT STATIONS

TOYOTA 8FGCU18 FORKLIFT PROPANE - 1 USED TOYOTA FORKLIFT PROPANE *LIFT DOES RUN AND WORK* ** DOES NOT COME WITH PROPANE TANK** ATTACHMENT: SIDE SHIFTER BACK TILT: 5 MAST: FSV SOLID TIRES RUN HOURS: 12070 TRUCK WEIGHT: 6950 LBS MAX LIFT WEIGHT: 3000 LBS

AMERICAN CAN CO. 8 AUTO CAN SEALER CAPABLE OF SPEEDS FROM 10 TO 40 CANS PER MINUTE DEPENDING ON SIZE CAN. CAN SIZE RANGE OF: 307 - 603" DIAMETER X 2.5"-9" OR 208 - 900 HEIGHT, WITH PROPER CHANGE PARTS. ATMOSPHERIC SEAMING, CURRENTLY SET UP FOR 502 DIAMETER CANS. EQUIPPED WITH DISC TO STARWHEEL INFEED. 3/60/230/460 - S/N: 0

KETAN K200 LABELER - 1 USED KETAN LABELER K200 MODEL: K200 CONVEYOR BELT: 6" WIDTH X 96" LENGTH ROLLER HEIGHT: 7" 6" TALL PADS HAS BOTTLE SPACING 2 VFD CONTROLLERS

LARGE FEED TURN TABLE 48'' - 1 USED LARGE 48" FEED TURN TABLE DIAMETER: 48" TURN TABLE HEIGHT: 39" GENERAL INFO: ROTARY TABLES ALSO REFERRED TO AS ACCUMULATION TABLES OR UNSCRAMBLING TABLES, ARE DESIGNED TO SUPPORT A VARIETY OF CONVEYOR SYSTEM REQUIREMENTS. THEY ARE OFTEN USED WITH ROUND CONTAINERS, SUCH AS BOTTLES, TO ACCUMULATE OR UNSCRAMBLE BULK, SO THAT THEY CAN BE DISCHARGED IN A SINGLE FILE LINE. ROTARY TABLES ENABLE THE COLLATION AND ACCUMULATION OF PRODUCTS FROM CONVEYOR LINES AND PACKING AREAS CREATING A BUFFER ZONE ON A LOW-SPEED LINE AND ALSO PROVIDING ACCUMULATION AT THE END OF A PRODUCTION LINE. IDEAL FOR AREAS THAT ARE NOT LARGE ENOUGH OR NOT SUITABLE FOR AN AUTOMATED SYSTEM.

1969 THOMAS 48-S ACCELA-COTA COATING MACHINE S/N: 48-852 GENERAL INFO: OUR COMMITMENT TO TABLET MANUFACTURING EXCELLENCE IS WELL DEMONSTRATED BY OUR INDUSTRY-LEADING ACCELA-COTA TABLET COATING SYSTEMS. THE THOMAS ACCELA-COTA FEATURING A FULLY PERFORATED COATING DRUM REVOLUTIONIZED THE COATING MANUFACTURING PROCESS WHEN IT WAS INTRODUCED IN 1969, AND IT CONTINUES TO SET THE STANDARDS FOR TABLET COATING WITH UNRESTRICTED AIR FLOW, THERMODYNAMIC EFFICIENCY, AND FLEXIBILITY. FEATURES: FLUSH-MOUNTED SOLUTION-DELIVERY COMPONENTS FOR UNPARALLELED ACCESS AND CLEANABILITY REDUCED INSTALLATION SPACE THE HIGHLY ACCURATE FLOWMETER FOR SOLUTION FLOW CONTROL SANITARY PERISTALTIC PUMP RIGHT HAND OR LEFT-HAND MOUNTING CONFIGURATION COATING CHAMBER GEOMETRY OPTIMIZED FOR EFFECTIVE CLEANING AND DRAINAGE MULTIPLE CLEANING ZONES TO ENSURE WASH-IN-PLACE (WIP) COVERAGE ON ALL INTERNAL SURFACES RANGE OF AFFORDABLE WIP OPTIONS SANITARY PERISTALTIC PUMP FULL RECIPE-BASED WIP CONTROL AVAILABLE STREAMLINED SANITARY DESIGN ELIMINATES AIR AND SOLUTION LINES OVERSPRAY ZONE PATENTED THOMAS SPRAY BAR WITH ANTI-BEARDING NOZZLES INDEPENDENT CONTROL OF THE PATTERN AND ATOMIZING AIR TOOL-LESS MAINTENANCE MODULAR ERGONOMIC DESIGN

USED QUANTITATIVE SEMI-AUTOMATIC PASTE LIQUID FILLING MACHINE G1WG WITH HEATED HOPPER & MIXING MOTOR MODEL: G1WG FILLING RANGE: 30-300 ML FILLING SUBSTANCE: PASTE NOZZLE SIZE: 10 MM (3/8") NOZZLE FILLING SPEED: MAXIMUM 30 BOTTLES PER MINUTE FILLING VOLUME RANGE: 1.7 - 17 OZ (50 - 500 ML) HOPPER: 7.9 GALLONS (30L) AIR REQUIREMENT: 50 - 87 PSI

2014 MARKEM 9030 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9030 S/N: US14110328 VOLTS:120 AMPS: .5 HZ:50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

2018 GG-1250 COATING PAN - 1 USED COATING PAN VOLTS: 220 HZ: 60 PHASE: 3 KW: 3 MFG. DATE: 2018.02

HITACHI PB-260U INK JET PRINTER WITH STAINLESS STEEL TABLE VOLTS: 120 PHASE: 1 HZ: 60 AMPS: 1.25 MASS: 25KG S/N: PB09203807 INK COLOR: YELLOW MAX NUM. OF LINES: 2 MAX PRINT RATE: UP TO 821 CHARACTERS OPERATING TEMP.: 32-113 F WEIGHT: 55 LBS GENERAL INFO: THE PB SERIES HAS BEEN DESIGNED TO PROVIDE A SIMPLE, LOW-COST, 2-LINE PRINTER FOR ENTRY-LEVEL APPLICATIONS. HITACHI HAS BEEN MANUFACTURING SMALL CHARACTER CONTINUOUS INKJET PRINTERS SINCE 1975. THE PB SERIES FEATURES AN 8.9 MONOCHROME LCD TOUCH PANEL WITH FULL INTUITIVE MENUS ON THE SCREEN PROVIDING EASY AND QUICK OPERATION AND MAINTENANCE. THE PB SERIES UNIQUE AND INNOVATIVE INK CIRCULATION SYSTEM HELPS REDUCE FLUID EVAPORATION AND ACHIEVES A VERY LOW COST OF OPERATION. NOZZLE AND GUTTER ARE AUTOMATICALLY CLEANED BEFORE SHUT DOWN, SO NO SPECIAL PROCEDURES ARE REQUIRED. THE PB SERIES VISCOSITY AND DENSITY CONTROL FEATURE PROVIDES STABLE INK DROP FORMATION AND KEEPS PRINT QUALITY HIGH.

2013 MARKEM 9020 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9020 S/N: US13120097 VOLTS:120 AMPS: .5 HZ:50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

SGP SGP 200 BOTTLE ELEVATOR AND AUTOMATIC INLINE CAPPER VOLTS: 230 PHASE: 3 HZ: 50/60 POWER: 1500 W OUTPUT: 60-100 BOTTLES/MIN AIR SUPPLY: 0.4-0.6 MPA, 20L/MIN S/N: 15126257 GENERAL INFO: SGP-200 AUTOMATIC IN-LINE/SPINDLE CAPPER IS APPLICABLE FOR ROUND, RECTANGULAR, AND MOST IRREGULAR BOTTLES AND CONTAINERS. A NOISELESS CAP ELEVATOR TO UNSCRAMBLE AND FEED CAPS FOR THE CAPPING SYSTEM. CONTAINS A LARGE CAPACITY FLOOR LEVEL CAP HOPPER TO STOCK CAPS FOR LONG RUNS WITHOUT CONTINUAL REFILLING. THE CAP CHUTE IS ADJUSTABLE FOR DIFFERENT SIZES OF CAPS. THE UNIQUE DESIGN REQUIRES NO CHANGEOVER PARTS AND NO TOOLS WHEN CHANGING CAPS SIZES. FOUR HAND WHEELS WITH DIGITAL INDICATORS FOR QUICK AND EASY ADJUSTMENTS. A CAP CHUTE SENSOR IS PROVIDED TO DETECT CAPS IN CAPS CHUTE. THE CAP ELEVATOR WILL STOP WHEN THE CAP CHUTE IS FULL. A SAFETY GUARD SURROUNDS THE CAP LIGHTENING STATION FOR THE OPERATORS SAFETY. A FAIL-SAFE DUAL INSPECTION SYSTEM REMOVES INCORRECTLY ORIENTED CAPS FROM THE LOADING CHUTE. FEATURES: REJECTING SYSTEM FOR IMPROPERLY CAPPED BOTTLES AND/OR MISSING FOIL CAP LINERS. SENSOR DETECTION AND REJECTION SYSTEM WHICH IS AVAILABLE TO REMOVE IMPROPERLY CAPPED BOTTLES AND CAPS WHICH HAVE MISSING FOIL CAP LINERS. VARIABLE SPEED CONTROL. STANDARD OPTION PLC CONTROL W/COLOR TOUCH SCREEN PANEL SNAP-ON CAPPING SYSTEM CAN BE INTEGRATED INTO THIS UNIT FOR DUAL APPLICATIONS.

KAPS ALL CAPPER MODEL D CAP SIZE: BETWEEN 40 MM AND 70 MM S/N: 1989

2013 MARKEM 9030 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9030 S/N: US13240328 VOLTS:120 AMPS: .5 HZ:50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

24 LANE TABLET COUNTER LANES: 24 GENERAL INFO: PILL COUNTERS ARE USED FOR CONVENIENT, TIME-SAVING PILL COUNTING. THE PRIMARY PURPOSE OF A TABLET COUNTER (ALSO KNOWN AS A PILL COUNTER OR DRUG COUNTER) IS TO ACCURATELY COUNT PRESCRIPTION MEDICATIONS IN TABLET OR CAPSULE FORM TO AID THE REQUIREMENT FOR PATIENT MEDICATION SAFETY, TO INCREASE EFFICIENCY, AND REDUCE COSTS FOR THE TYPICAL PHARMACY OR NURSING HOME. PRESCRIPTION DISPENSING SAFETY AND ACCURACY IN THE PHARMACY OR NURSING HOME ARE AN ESSENTIAL PART OF ENSURING THE RIGHT PATIENT GETS THE RIGHT MEDICATION AT THE RIGHT DOSAGE.

2005 W.S. TYLER RO-TAP SIEVE SHAKER RX-29 1 USED W.S. TYLER RO-TAP SIEVE SHAKER RX-29 MODEL: RX-29 S/N: 2416 VOLTS: 115 HZ: 60 SIEVE SIZE: 8" GENERAL INFO: THE INDUSTRY STANDARD IN TEST SIEVE SHAKERS, W.S. TYLERS RO-TAP HAS A UNIQUE TWO-DIMENSIONAL OPERATION: A HORIZONTAL, CIRCULAR MOTION AND A VERTICAL, TAPPING MOTION. THIS SPECIAL ACTION ALLOWS MATERIAL PARTICLES TO STRATIFY AND SEEK CRITICAL OPENINGS IN THE TEST MEDIA. THIS UNIT PROVIDES THE MOST ACCURATE AND CONSISTENT PARTICLE ANALYSIS TESTING. THE RX-29 MODEL IS DESIGNED FOR TESTING WITH 8" DIAMETER TEST SIEVES.

2013 MARKEM 9030 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9030 S/N: US13240327 VOLTS: 120 AMPS: .5 HZ: 50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

2012 MARKEM 9020 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9020 S/N: US12070101 VOLTS:120 AMPS: .5 HZ:50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

2012 MARKEM 9020 CONTINUOUS INKJET PRINTER (BLACK) TYPE: 9020 S/N: US12070100 VOLTS:120 AMPS: .5 HZ:50-60 GENERAL INFO: THE 9000 SERIES PRINTERS OFFER THE BEST BALANCE BETWEEN PERFORMANCE AND FLEXIBILITY IN THEIR SEGMENT FOR EASY INTEGRATION IN ALL MANUFACTURING ENVIRONMENTS. THEIR STATE-OF-THE-ART DESIGN REQUIRES MINIMAL ATTENTION AND PROVIDES HIGH-QUALITY CODING. THE CONTINUOUS INKJET TECHNOLOGY PRINTS THE BEST BEFORE DATES, LOGOS, ALPHANUMERIC TEXT, AND 1D AND 2D BARCODES FOR FOOD, BEVERAGE, PHARMACEUTICAL, COSMETIC AND ELECTRONIC INDUSTRIES. FEATURES: ERGONOMIC DESIGN WITH INTUITIVE USER INTERFACE FEATURING SHORTCUTS AND DIRECT ACCESS TO CONSUMABLES. COMPACT DESIGN AND STAND MOUNTING OPTION FOR EASY INTEGRATION INTO THE PRODUCTION LINE. UP TO 8-LINE PRINTING. HIGH-SPEED MULTI-LINE PRINTING UP TO 5.5M/S. AUTOMATIC INK-PRESSURE ADJUSTMENT (JET SPEED CONTROL) GUARANTEEING PRINT QUALITY. UNIQUE HEAD CLEANING SYSTEM TO ENSURE TROUBLE-FREE STARTUP. EASY CHANGE OF THE CONSUMABLES WITHOUT STOPPING MARKING OPERATIONS. WIDE CHOICE OF OPTIONS MAKING INTEGRATION ONTO MOST PRODUCTION LINES EFFICIENT

MJK 0517 TUMBLE DRYER - 1 USED TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

H.G. KALISH MJK0533 COATING PAN S/N: FX06012

12FT VARIABLE SPEED CONVEYOR 12" BELT ON ROLLING CASTERS VARIABLE SPEED DRIVE

MOREHOUSE INDUSTRIES A-200 POWDER GRANULATOR S/N: 226 HP: 3/4 CYCLES: 60 PHASE: 1

MJK 0512 LABEL REWINDER STATION - 1 USED LABEL REWINDER STATION STAINLESS STEEL FOOT PEDAL ACTIVATION. LABEL REWINDERS WIND-UP LABELS INTO A ROLL AS THEY COME OUT OF A PRINTER. WITHOUT A REWINDER, THE LABELS MUST BE GATHERED BY HAND. THIS REWINDER FEATURES A STAINLESS STEEL TABLE CONSTRUCTION ALONG WITH A FOOT PEDAL FOR WINDING LABELS.

6FT VARIABLE SPEED ROACH CONVEYOR S/N: 481638 INCLINE CONVEYOR ON ROLLING CASTERS VARIABLE SPEED DRIVE

OMEGASONICS WATER BATH

MJK0540 JS-3 FREEZING FORCE METER SYSTEM CONFIGURATION REQUIREMENTS: DJS-3FREEZING FORCE METER1 SET HW-3A PRECISION CONSTANT TEMPERATURE COLD WATER TANK (FOOD GRADE THICK STAINLESS STEEL LINER) 1 SET ZL-3 REFRIGERATOR (STAINLESS STEEL EVAPORATOR) 1 SET FROZEN BOTTLE (CAPACITY = 150ML INTERNAL DIAMETER = 59MM HEIGHT = 85MM) 16 SETS HW-3A PRECISION CONSTANT TEMPERATURE COLD WATER TANK, ZL-3 REFRIGERATOR WORKING CONDITIONS: POWER SUPPLY VOLTAGE: 220V; FREQUENCY: 50HZ; ENVIRONMENTAL CONDITIONS: 0 C ~ 40 C RELATIVE HUMIDITY 20% ~ 80%, INDOOR AIR ENVIRONMENT WITHOUT CONDENSATION. TECHNICAL INDICATORS AND CHARACTERISTICS: LOAD RANGE: 0~1000G RESOLUTION: 0.1G ACCURACY: 0.5% FSR DISPLACEMENT RANGE: 0~100MM RESOLUTION: 0. 1MM ACCURACY: 0.1MM SPEED ADJUSTMENT: 0.1MM/S~10MM/S SPEED REGULATION RESOLUTION: 0.1MM/S ACCURACY: 1% OF SETTING ACCURACY

2002/2013 KORSCH XL400 TYPE: XL400 S/N: K1500058 PHASE: 3 VOLTS: 480 HZ: 60 AMPS: 35 KW: 8.5 GENERAL INFO: THE XL 400 PLATFORM PERMITS COMPLETE TURRET AND SPARE PARTS COMPATIBILITY BETWEEN THE SFP AND THE MFP MODELS. THE SFP AND MFP SHARE AN IDENTICAL CONTROL SYSTEM AND HMI ENVIRONMENT, AND A PROCESS EQUIVALENT DESIGN TO PERMIT THE TRANSFER OF SINGLE-LAYER PRODUCTS BETWEEN MACHINES. THE SFP AND MFP SHARE COMMON PROCEDURES FOR SETUP, CHANGEOVER, AND TURRET EXCHANGE. FEATURES: THE XL 400 OFFERS A RANGE OF SPECIAL FEATURES, INCLUDING: HIGH CONTAINMENT AND WASH-IN-PLACE EXECUTION (WIPCON) INCLUDING PERIPHERAL EQUIPMENT FOR OEB 5 CONTAINMENT APPLICATIONS (<0.1 G/M3) MEDIUM CONTAINMENT (OEB 3) EXECUTION FOR HORMONE PRODUCTION DEEP FILL (28 MM) FOR LOLLIPOP EXECUTION, TABLET THICKNESS TO 14.5 MM MICRO-CHIP-IN-TABLET CAPABILITY

MJK 0520 TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

MJK 0521 TUMBLE DRYER - 1 USED TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

MJK 0524 TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

MJK 0518 TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

MJK 0519 TUMBLE DRYER - 1 USED TUMBLE DRYER BASKET DIMENSIONS: 27" DIAMETER X 33.5" LENGTH GENERAL INFO: THE SOFTGEL CAPSULES UPON ENCAPSULATION, LEAVE THE DIE SYSTEM AND GET STRAIGHT TO THE TUMBLE DRYER. IT IS THE CONVEYOR BELTS THAT FACILITATE THE MOVEMENT OF THE ALREADY ENCAPSULATED CAPSULES TO THE DRYER. THIS EQUIPMENT THEN TUMBLES THE SOFTGEL CAPSULES FOR APPROXIMATELY 30 TO 40 MINUTES UNTIL THEY ARE DRY AND READY TO BE PACKAGED.

2007 HARTNETT B-10-8-I-1 SOFT GEL CAPSULE PRINTER S/N: 595 WEIGHT: 1500 LBS MFG. DATE: 8/27/07 VOLTS: 240 PHASE: 1 HZ: 60 AMPS: 15 AIR PRESSURE: 80 PSI RECOMMENDED THE MODEL B IS CAPABLE OF PRINTING UP TO 320,000 UNITS PER HOUR WITH OUR CARRIER BARS CAPABLE OF PRINTING ALL CAPSULE SIZES MACHINE SITS ON FOUR CASTER WHEELS ALLOWING IT TO BE MOBILE THE MODEL B MACHINE CAN BE USED FOR HARD GELATIN CAPSULES #5 THROUGH #00, SOFT GELATIN CAPSULES, OVAL AND OBLONG, AND ALL SIZES OF TABLETS, PILLS AND LENTIL. ALSO THE MODEL B MACHINE IS NO STRANGER IN THE CONFECTIONERY INDUSTRY AS WELL. GENERAL INFO: OUR CUSTOM CAPSULE PRINTING MACHINES CAN MARK HARD GELATIN OR VEGETARIAN CAPSULES OF ANY SIZE. USER-FRIENDLY AND FULLY CUSTOMIZABLE, OUR MACHINES HAVE THE ABILITY TO PRINT ONE OR TWO COLORS, ON EACH SIDE OF YOUR CAPSULES. YOUR CAPSULES CAN BE CUSTOM PRINTED TO INCLUDE YOUR LOGO, BRAND NAME, DOSAGE, OR ANY OTHER IDENTIFYING MARK OR COMBINATION OF CHARACTERS. LOOK NO FURTHER FOR THE HIGHEST QUALITY CUSTOM CAPSULE PRINTERS.

TABLET PRESS 16 STATION D- TOOLING TURRET HEAD TABLETS PER HOUR: 21,000- 105,000 RPM: 22- 110 MAXIMUM TABLET DIAMETER: 25MM MAXIMUM LENGTH: 25MM MAXIMUM DIAMETER: 38.1MM MAXIMUM DEPTH: 20MM PUNCH DIAMETER: 25.35MM LENGTH OF PUNCH: 133.6 KW: 5.5 WEIGHT 1000 DIMENSIONS: 700MM X 1000MM X 1750MM CONTROL BY A PLC WITH SELF-PROTECTION FUNCTIONS. EASY-TO-UNDERSTAND MENU-BASED TOUCH SCREEN. FORCED FEEDING SYSTEM. CENTRAL SELF-LUBRICATION SYSTEM. PRE COMPRESSION AND COMPRESSION SYSTEM. AUTO DUST COMPENSATION. MONITORS THE PRESSURE IN EACH PUNCH AND DISPLAYS IT ON THE TOUCH SCREEN. IT HAS TWO OUTPUTS, ONE FOR TABLETS WITHIN SPECIFICATIONS AND THE OTHER FOR DEFECTIVE ONES. THE PRE-COMPRESSION AND COMPRESSION ARE SUPPORTED BY A HYDRAULIC SYSTEM, THIS SYSTEM ACTS AS A BUFFER AND PROTECTS THEEQUIPMENT OF AN OVERPRESSURE. FORCE FEEDING SYSTEM INCREASES EFFECTIVENESSOF THE FEEDING AND AVOIDS THE SEPARATION OF THE COARSE AND FINEOF THE GRANULATE. THEY ARE EASY TO ASSEMBLE, DISASSEMBLE AND CLEAN. 240 VOLTS

2013 READING BAKING SYSTEMS SH202-048-2013-7102 ROTARY PRESSER/SHEETER S/N: J115043-070 GENERAL INFO: THE THOMAS L. GREEN 2-ROLL SHEETER CREATES A CONSISTENT DOUGH SHEET READY FOR DOUGH FORMING OR FURTHER REDUCTION. TWO POWERED STAINLESS STEEL ROLLS ROTATE TOWARD ONE ANOTHER AND DRAW RAW DOUGH INTO A SINGLE SHEET WITH CONSISTENT CHARACTERISTICS AND THICKNESS. THE STAINLESS STEEL ROLLS ARE MANUFACTURED TO PRECISE TOLERANCES OF CONCENTRICITY IN ORDER TO MAINTAIN CONSISTENT DOUGH SHEET FORMATION. FEATURES: ROLL GAP DISTANCE CAN BE MEASURED AND MONITORED DURING PRODUCTION SEPARATE DIRECT DRIVES FOR INDEPENDENT ROLL CONTROL SHEET THICKNESS CAN BE ADJUSTED DURING PRODUCTION EASY ACCESS FOR MAINTENANCE AND INSPECTION HOPPER LEVEL SENSING FOR AN ACCURATE HOPPER FILL VAC: 480 PHASE: 3 HZ: 60 AMPS: 10

MJK 0338 ROTARY CUTTER WITH EXTRA DIES. THE ROTARY CUTTING STATION ACCURATELY AND CONTINUOUSLY CUTS DISTINCT PRODUCT SHAPES OUT OF A SINGLE DOUGH SHEET. AN INTEGRATED CONVEYOR SYSTEM MOVES THE PRODUCT THROUGH - AND IS PRESSURED AGAINST - A ROTATING DIE ASSEMBLY. OPERATORS CAN ADJUST THE PRESSURE ON THE DOUGH SHEET DURING OPERATION TO ENSURE A THOROUGH CUT AND CONSISTENT PIECE PRODUCTION. FEATURES: MAY BE DESIGNED WITH TWO OR MORE DIE ROLLS FOR COMPLEX SHAPE PRODUCTION OR USED INDEPENDENTLY FOR DIFFERENT PRODUCTS ON THE SAME LINE. AN INTEGRATED SCRAP REMOVAL SYSTEM MAY BE MOUNTED ON THE DISCHARGE END OF THE MACHINE. SCRAP DOUGH CAN BE DISCHARGED AND RE-ROUTED TO THE DOUGH HANDLING SYSTEM FOR REUSE. THE GAP BETWEEN THE CONVEYOR AND DIE ROLL AND THE PRESSURE EXERTED ON THE CONVEYOR BELT IS ADJUSTABLE. DOUGH SHEET THICKNESS IS TYPICALLY BETWEEN .89MM (.035") AND 1.65MM (.065") PRIOR TO CUTTING, BUT THICKER SHEETS MAY BE ACCOMMODATED. DIE ROLLS CAN BE ENGRAVED BRONZE, COATED METALS, OR PLASTIC CUPS.

TRANSFER CONVEYOR - 1 USED TRANSFER CONVEYOR DIMENSIONS: 4' X 10'

2012 SCHENCK ACCURATE FEEDER MODEL 1100233619-10A S/N: PFPPB-001 THE ABILITY TO ACCURATELY AND CONSISTENTLY METER INGREDIENTS INTO A CONTINUOUS MIXER IS CRITICAL TO THE QUALITY AND CONSISTENCY OF THE PRODUCT AT THE MIXER DISCHARGE GRAVIMETRIC, LOSS-IN-WEIGHT TECHNOLOGY PROVIDES PRECISE, UNINTERRUPTED DRY INGREDIENT METERING INGREDIENT REFILLS ARE PROGRAMMED IN ADVANCE AND CONTROLLED BY THE TOUCHSCREEN CONTROL INTERFACE FLOW-METERS CONNECTED TO THE CLOSED LOOP CONTROL SYSTEM ENSURES THAT THE LIQUID INGREDIENTS ARE ACCURATELY DELIVERED IN COORDINATION WITH THE DRY INGREDIENTS LIQUID ADDITION SYSTEM FOR MIXER MADE IN 2012, FEATURES TWO LEE 30 DB STAINLESS TANKS, RATED FOR 250 DEGREES. BOTH WITH FLOWMETERS AND 1HP PUMP READING BAKERY CONTINUOUS MIXER, MODEL# 0X001-000-2013-7099 SERIAL# J115043-040 MEZZANINE FOR BLENDING SYSTEM 480VAC 3-PHASE 200A POWER REQUIREMENT FABRICATED CHIP SHEETER AND ROTARY CUTTER CONSISTENT PRODUCTION OF SHEETED SNACKS. THE THOMAS L. GREEN FABRICATED CHIP SHEETER IS A FORMING MACHINE CAPABLE OF SHEETING AND CUTTING SHAPES FROM POTATO DOUGHS CONSISTING OF DRY PREMIXES, POTATO FLAKES, WHOLE GRAINS, CORN AND OTHER FORMULATIONS. DOUGH IS DELIVERED TO A HOPPER ABOVE TWO LARGE-DIAMETER, SOLID CORE, WATER-COOLED SHEETING ROLLS. IN A SINGLE PASS, DOUGH IS REDUCED AND SHEETED TO A TYPICAL THICKNESS OF 0.7MM (.027). CUT SHAPES ARE DELIVERED DIRECTLY INTO AN OVEN OR FRYER PRIOR TO SEASONING AND PACKAGING, SHEETER DIE/CUTTER FOR CHIPS BY READING BAKERY SYSTEMS ROTARY CUTTER. ROTARY CUTTING STATION PRECISELY CUT PRODUCT SHAPES. THE THOMAS L. GREEN ROTARY CUTTING STATION ACCURATELY AND CONTINUOUSLY CUTS DISTINCT PRODUCT SHAPES OUT OF A SINGLE DOUGH SHEET. AN INTEGRATED CONVEYOR SYSTEM MOVES PRODUCT THROUGH AND IS PRESSURED AGAINST A ROTATING DIE ASSEMBLY. OPERATORS CAN ADJUST THE PRESSURE ON THE DOUGH SHEET DURING OPERATION TO ENSURE A THOROUGH CUT AND CONSISTENT PIECE PRODUCTION. MODEL SH202-48-2013-7102, SERIAL NUMBER J115043-080 WITH DIES BY AMERICAN ENGRAVING DESIGNED POTATO CHIP CUTTER DIE, TORTILLA CUTTER DIE, AND CEREAL INCLUSION DIE. BY READING BAKERY SYSTEMS MESH BELT 48 WIDE X 120 LONG, AUTO TRACKING, 575VAC/3-PHASE/100A SYSTEM, 6MM BTU/HR TOTAL SPRAY DYNAMICS (HEAT & CONTROL) SEASON APPLICATION SYSTEM (TUMBLER/SPRAYING/SEASONING DEPOSITING) SPECIFICATIONS: SOFT FLIGHT COATING DRUM SPRAY DYNAMICS SOFT FLIGHT COATING DRUMS ARE DESIGNED AND ENGINEERED SPECIFICALLY TO YOUR PRODUCT REQUIREMENTS. VARIABLE TILT FRAME ASSEMBLY AND PRODUCT FLIGHT DESIGN EXPOSES EACH PIECE OF PRODUCT TO THE APPLICATION OF LIQUID AND DRY COATINGS. OUR 304 STAINLESS STEEL SHELL-IN-SHELL CYLINDER DRUM PROVIDES SANITARY OPERATION AND SIMPLE CLEANING FOR SNACK, MEAT, DAIRY, AND OTHER PROCESS-SPECIFIC APPLICATIONS. CUSTOM PRODUCT FLIGHT CONFIGURATION REDUCES BREAKAGE 304 STAINLESS STEEL SHELL-IN-SHELL CYLINDER WASH DOWN MOTOR ASSEMBLY WITH VARIABLE SPEED CONTROLLER NEMA 4 STAINLESS STEEL CONTROL CONSOLE PORTABLE CASTERS WITH BRAKE ASSEMBLY COATING DRUM 36 DIA X 82 LONG MODEL SLURRY ENCOATER SERIAL# 1023 SPRAY DYNAMICS IS A LEADER IN PROVIDING THE FOOD INDUSTRY WITH SOLUTIONS FOR APPLICATION OF DRY INGREDIENTS AND OTHER SMALL PARTICULATES THE SCARF PLATE PROVIDES EVEN DISTRIBUTION OF DRY INGREDIENTS, NUTS, SEEDS AND MANY OTHER SMALL PARTICULATES. THE COMBINATION OF SPRAY DYNAMICS UNI-SPENSETM AND SCARF PLATE CAN BE MOUNTED ON A VARIETY OF STANDS DESIGNED TO FIT AROUND MOST EXIT CONVEYORS WITH POSITIVE TOOLS-FREE LOCKING MECHANISMS TO ENSURE THE SCARF REMAINS IN THE SAME POSITION DAY AFTER DAY DANISH FOOD EQUIPMENT OVEN 1-USED 1.2 (48") METER WIDE MESH BELT X 104' LONG PLC CONTROLS 5 ZONE 480V/3PH/60HZ (OVEN IS 575 BUT COMES WITH A DOWN TRANSFORMER) NEW IN 2005, REFURBISHED IN 2013, GREAT SHAPE NOW! SPECIFICATIONS: MANUFACTURED BY DELTA FOOD EQUIPMENT (OWNED BY MEINCKE) DELTA THREE TUNNEL OVEN - 5 ZONE BELT WIDTH: 1.2 METERS WIRE MESH THE OVEN IS BEING USED BAKING AT 500F. MAX TEMPERATURE IS 650F. IT WAS BEING USED TO PAR BAKE PIZZA CRUSTS, AND RECENTLY CHIPS PRIOR TO A DRYER HOWEVER, IT WILL WORK WITH MOST TYPES OF FLATBREADS. IT WAS ONLY BEING USED APPROXIMATELY 10 HOURS PER WEEK FOR FLATBREADS THEN WAS INSTALLED IN 2013 FOR CHIPS. BAKE CHAMBER: 104 FT LONG (CAN BE SET FOR 110 FT). MADE UP OF 16 TWO METER SECTIONS. THE INTAKE SECTION IS 6 FT LONG AND EXIT SECTION IS 8 FT LONG. INSPECTION HATCH LOCATED ON EVERY SECTION. BURNERS ARE LO NOX WEISHAUPT NEW IN 2013. GAS VALVES ARE NEW IN 2013. SCREEN IS ALLEN BRADLEY PANELVIEW 1000. PLC SYSTEM IS ALLEN BRADLEY. WE HAVE FULL DOCUMENTATION ON ALL ELECTRONICS AND PROGRAMMING.

2005 DELTA FOOD EQUIPMENT THREE TUNNEL OVEN 5 ZONE BELT WIDTH: 1.2 METERS WIRE MESH. THE OVEN IS BEING USED BAKING AT 500F. MAX TEMPERATURE IS 650F. IT WAS BEING USED TO PAR BAKE PIZZA CRUSTS, AND RECENTLY CHIPS PRIOR TO A DRYER HOWEVER, IT WILL WORK WITH MOST TYPES OF FLATBREADS. IT WAS ONLY BEING USED APPROXIMATELY 10 HOURS PER WEEK FOR FLATBREADS THEN WAS INSTALLED IN 2013 FOR CHIPS. BAKE CHAMBER: 104 FT LONG (CAN BE SET FOR 110 FT). MADE UP OF 16 TWO METER SECTIONS. THE INTAKE SECTION IS 6 FT LONG AND EXIT SECTION IS 8 FT LONG. INSPECTION HATCH LOCATED ON EVERY SECTION. BURNERS ARE LO NOX WEISHAUPT NEW IN 2013. GAS VALVES ARE NEW IN 2013. SCREEN IS ALLEN BRADLEY PANELVIEW 1000. PLC SYSTEM IS ALLEN BRADLEY. WE HAVE FULL DOCUMENTATION ON ALL ELECTRONICS AND PROGRAMMING. REFURBISHED IN 2013. 1.2 (48") METER WIDE MESH BELT X 104' LONG PLC CONTROLS 5 ZONE 480V/3PH/60HZ (OVEN IS 575 BUT COMES WITH A DOWN TRANSFORMER)

2013 READING BAKING SOLUTIONS 0X001-000-2013-7099 CLAM SHELL CONTINUOUS MIXER S/N: J115043-040 DIMENSIONS: 6.5" OPENING AT THE TOP, 77" LENGTH OF SHELL, 18" DIAMETER, LENGHT OF BLADES: 6.5" RECTANGULAR OUTLET: 13.25" X 9.5" VAC: 480 HZ: 60 AMPS: 50 PHASE: 3 GENERAL INFO: THESE CONTINUOUS PROCESSORS FEATURE AN OPTIONAL CLAMSHELL BARREL DESIGN THAT OPENS QUICKLY AND EASILY TO ACCESS THE PADDLES AND SCREWS FOR CLEANING, INSPECTION, AND/OR ADJUSTMENTS TO THE CONFIGURATION. OPENING AUTOMATICALLY AT THE PUSH OF A BUTTON, THE PROPRIETARY CLAMSHELL BARREL DESIGN USES HYDRAULIC POWER TO RAISE THE BARREL AND EXPOSE THE INTERIOR, WHILE ALSO LOCKING THE BARREL SAFELY IN PLACE. THE DESIGN ELIMINATES THE CRANES, HOISTS, AND OTHER EQUIPMENT NEEDED TO ACCESS THE SCREWS AND PADDLES USING TRADITIONAL BARREL DESIGNS ALONG WITH THEIR NEED FOR EXTRA FLOOR SPACE AS TEMPORARY BARREL STORAGE DURING CLEANING AND MAINTENANCE. DEVELOPED FOR FOOD, PLASTICS, CHEMICAL, PHARMACEUTICAL, AND OTHER PROCESSORS, THE CLAMSHELL DESIGN SPEEDS THE CHANGEOVER PROCESS AND PROMOTES COMPLETE CLEANING TO VIRTUALLY ELIMINATE THE POTENTIAL FOR CROSS-CONTAMINATION. THE CLAMSHELL DESIGN IS SUITABLE FOR AUTOMATICALLY MIXING, COMPOUNDING, REACTING, CRYSTALLIZING, ENCAPSULATING, PRECONDITIONING, AND OTHER PROCESSES THAT REQUIRE MULTIPLE POWDERED, LIQUID, AND VISCOUS MATERIALS TO BE COMBINED INTO A UNIFORM, HOMOGENEOUS PRODUCT. THE CLAMSHELL DESIGN IS CUSTOM-ENGINEERED WITH THE CONTINUOUS PROCESSOR FOR EACH INSTALLATION TO ACCOMMODATE NEARLY ANY MATERIAL INCLUDING ABRASIVES, CORROSIVES, AND MATERIALS REQUIRING FDA, USDA, AND/OR 3A COMPLIANCE. THIS CLAM SHELL MIXER WAS USED IN THE PROCESS OF CREATING PROTEIN CHIPS.

2013 SCHENCK 110023361-10A ACCURATE FEEDER S/N: PFPPB6-001 TYPE: MID MLCH SCREW DIAMETER: 1.5" HP: 0.5 HP, VOLTS: 230-460 RPM: 1725 GENERAL INFO: THE ACCURATE SERIES VOLUMETRIC FEEDING SYSTEMS ARE AVAILABLE FOR EVERY FEEDING APPLICATION. THEIR MOST OUTSTANDING PROPERTIES ARE THEIR ECONOMY AND FLEXIBILITY, AS WELL AS THEIR EASE OF INTEGRATION INTO EXISTING PRODUCTION LINES. WITH FEED RATES RANGING FROM APPROXIMATELY 0.000017 TO 280FT3/H (0.1/H TO 8,000I/H), THE FEEDING SYSTEM CAN BE USED FOR CONTINUOUS FEEDING, CHARGING, AND BATCHING. IT CAN PROCESS BULK SOLIDS WITH A PARTICLE SIZE OF UP TO 10 MM. MODEL 10 THE ACCURATE MODEL 10 IS EASILY DISASSEMBLED FOR CLEANING OR FOR APPLICATIONS THAT REQUIRE SEPARATE HOPPERS FOR DIFFERENT MATERIALS. THE TUF-FLEXTM HOPPER IN THE MODEL 10 CAN BE CHANGED IN LESS THAN TWO MINUTES WITHOUT TOOLS. FURTHER ADVANTAGES THE ACCURATE SERIES VOLUMETRIC FEEDERS COME EQUIPPED WITH EASY TO REMOVE OUTSIDE PANELS, STAINLESS STEEL CONSTRUCTION, LIFETIME LUBRICATED BEARINGS, DOUBLE SHAFT SEALS TO PREVENT POWDER LEAKAGE, GASKETED COVERS, AND VINYL HOPPERS THAT ARE AGITATED ON THE EXTERIOR FOR GENTLE PRODUCT DISCHARGE. A LARGE INLET PREVENTS BRIDGING AND THE ROUNDED CORNERS ON THE VINYL HOPPER HELP PROVIDE AN UNINTERRUPTED FLOW.

MJK 0450 DOUBLE LIQUID AUTOMATIC PNEUMATIC FILLER WITH HEATING HOPPER FILLING RANGE: 100-1000 ML(G) FILLING ACCURACY: +/- 0.5% FILLING SUBSTANCE: LIQUID VOLTS: 220 HZ: 50 SPEED: 1-25 BOTTLE/MIN

1999 SIMPLEX AV200 HIGH VISCOSITY VOLUME FILLER S/N: 7303 GENERAL INFO: THE SIMPLEX MODEL AV-200 IS OUR TWO-HEAD, CAM-ACTION, FULLY-AUTOMATIC, VOLUMETRIC PISTON FILLER. THE FILL VOLUME IS UP TO 6 LITERS IN ONE SHOT... IDEAL FOR FOAMY, FUSSY AND/OR DIFFICULT LIQUID PRODUCTS AND CONTAINERS. DURABILITY AND RELIABILITY THE SIMPLEX MODEL AV-200 IS RECOGNIZED AS THE WORLD STANDARD FOR LIQUID, SEMI-SOLID AND/OR PARTICULATE FILLING. ALL CONTACT POINTS ARE CONSTRUCTED OF USDA APPROVED MATERIALS MAKING IT USEFUL FOR MANY PRODUCTS AND OPERATIONS. THIS FILLER IS BUILT FOR 24/7 PRODUCTION RUNS, SO DURABILITY AND RELIABILITY IS OUR TOP PRIORITY. ECONOMICAL AND VERSATILE THIS SIMPLE YET SOPHISTICATED MACHINE WILL BE THE FOUNDATION FOR YOUR SUCCESS!

VOLPAK V160.03 LIQUID FILLER WITH TAKE AWAY CONVEYOR ML: #07

VOLPAK V100 POWDER FILLER - 1-USED VOLPAK 100 WITH IMAGE POWDER FILLER HEAD