Auction of Excess Equipment from Hause Machines 2 Locations
Category: CNC MACHINE CENTERS
Total Lots:
166
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
KYSOR JOHNSON | H250-SA |
2000 KYSOR JOHNSON H250-SA HORIZONTAL BAND SAW, 3-PHASE, 4-POLE. UNTESTED.
|
🔒 Subscribe | |
|
|
LOVESHAW | LITTLE DAVID |
LOVESHAW LITTLE DAVID CASE SEALER. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. SEE PHOTOS FOR ADDITIONAL DETAILS. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
KALAMAZOO | H9AW |
2000 KALAMAZOO H9AW BAND SAW. 110V. WORKING UNIT
|
🔒 Subscribe | |
|
|
LASSCO WIZER | FMMH-3.1 |
LASSCO WIZER FMMH-3.1 3-SPINDLE PAPER DRILL PRESS, USED - USED LASSCO WIZER FMMH-3.1 3-SPINDLE PAPER DRILL PRESS. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR SHOP USE. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
UNITED AIR SPECIALISTS | SFC-2-1-DD |
2000 UNITED AIR SPECIALISTS SFC-2-1-DD DUST COLLECTOR, 5 HP, 460V, USED
|
🔒 Subscribe | |
|
|
UNIFIED INDUSTRIES | LIFT ASSIST |
UNIFIED INDUSTRIES ELECTRIC LIFT ASSIST. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. SEE PHOTOS FOR ADDITIONAL DETAILS. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
FOX IV | 3000S |
FOX IV 3000S PRINT AND APPLY LABELING SYSTEM. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
LOVESHAW | 19SB |
LOVESHAW 19SB SEMI-AUTOMATIC SIDE-BELT CASE SEALER, FOR PARTS OR REPAIR - USED LOVESHAW 19SB CASE SEALER. TESTING HAS NOT BEEN PERFORMED. DUE TO THE STATED PARTS CONDITION, THIS ITEM SHOULD BE CONSIDERED FOR PARTS OR REPAIR. SEE PHOTOS FOR ADDITIONAL DETAILS. USED, FOR PARTS OR REPAIR.
|
🔒 Subscribe | |
|
|
COFFING | EC-4008 |
2000 COFFING EC-4008 ELECTRIC CHAIN HOIST, 2 TON CAPACITY. UNIT IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. S/N:
|
🔒 Subscribe | |
|
|
EAGLE MANUFACTURING | 1904 |
1904 SAFETY STORAGE CABINET, 4 GAL, USED - EAGLE 1904 STORAGE CABINET. UNIT IS LISTED WITH 4 GAL. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE.
|
🔒 Subscribe | |
|
|
CALDWELL | 90-3-48 |
CALDWELL 90-3-48 STRONG-BAC PALLET LIFT, 6000 LB CAPACITY, USED - USED CALDWELL 90-3-48 PALLET LIFT. UNIT IS LISTED WITH 6000 LB CAPACITY. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
DANTHERM | R040-160-CW |
DANTHERM R040-160-CW FILTRATION DUST COLLECTOR, USED - USED DANTHERM R040-160-CW DUST COLLECTOR. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
GOSSLING | 200-13797-03-3B |
200-13797-03-3B MAGNETIC SLIDE CONVEYOR FOR FERROUS SCRAP, USED - USED DR. ING. GOSSLING GMBH 200-13797-03-3B MAGNETIC SLIDE CONVEYOR. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
YEOMAN |
YEOMAN PNEUMATIC LIFT TABLES. YEOMAN LIFT TABLE. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | ||
|
|
VESTIL | PS-4045 |
VESTIL PS-4045 ADJUSTABLE PALLET STAND, 5000 LB CAPACITY. UNIT IS LISTED WITH 5000 LB CAPACITY. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
AGET | 800 DUSTKOP |
AGET 800 DUSTKOP CYCLONE DUST COLLECTOR, 3/4 HP, 575V, USED. UNIT IS LISTED WITH 575V, 3/4 HP. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
MAXUS | 6ZA36 |
MAXUS 6ZA36 PORTABLE ABRASIVE BLASTER, USED - USED MAXUS 6ZA36 ABRASIVE BLASTER. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED. SEE PHOTOS FOR ADDITIONAL DETAILS. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
KNIGHT GLOBAL | LT4860 |
KNIGHT GLOBAL LT4860 LIFT TABLE. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING HAS NOT BEEN PERFORMED, AND OPERATING CONDITION HAS NOT BEEN VERIFIED. NO ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
2003 | FADAL | VMC8030 HT |
2003 FADAL VMC8030 HT VERTICAL MACHINING CENTER WITH 240 V 3 PHASE, 50/60 HZ, 50 A FULL LOAD CURRENT, LARGEST AC MOTOR RATING 38.4 A AT 240 VAC, 21 KVA POWER REQUIREMENT, 10 KA MINIMUM SHORT CIRCUIT INTERRUPTING CAPACITY. ENCLOSED MACHINE BODY, FRONT ACCESS DOORS, MACHINE BASE, TABLE/ENCLOSURE AREA, AND PALLETS WITH VISIBLE TOOLING OR FIXTURES. VISIBLE CONDITION INCLUDES SHOP WEAR, SURFACE GRIME, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE. 3 PALLETS OF TOOLING INCLUDED. S/N 032003075502
|
🔒 Subscribe |
|
|
DOOSAN | DOOTURN-4 |
DOOSAN DOOTURN-4 CNC TURNING CENTER, FANUC SERIES 18-T CONTROL, STEELTRAK CHIP CONVEYOR, S/N LND0085. ENCLOSED MACHINE BODY, SLIDING ACCESS DOOR, CHUCK AREA, TURRET/TOOLING AREA, OPERATOR CONTROL PANEL WITH SCREEN AND KEYPAD, PENDANT-STYLE CONTROL FACE, WORK AREA LIGHTING, MACHINE BASE, TOP-MOUNTED DUCTING/COLLECTOR ASSEMBLY, AND CHIP CONVEYOR. SHOP WEAR, SURFACE GRIME, PAINT WEAR AND PEELING INSIDE THE WORK ENVELOPE, STAINING, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE.
|
🔒 Subscribe | |
|
|
MORI SEIKI | NZX 2500 L |
MORI SEIKI NZX 2500 L CNC TURNING CENTER WITH CHIP CONVEYOR AND COOLANT SYSTEM, 208V, S/N NZX25121008. MACHINE IS MARKED 208 VOLTS AND INCLUDES THE ATTACHED HENNIG CDF CHIP CONVEYOR AND CHIPBLASTER HIGH-PRESSURE COOLANT SYSTEM. MACHINE SHOWS VISIBLE WEAR FROM PRIOR INDUSTRIAL USE, INCLUDING SCRATCHES, SCUFFS, RESIDUE, AND GENERAL SHOP WEAR. NO TOOLING, COLLETS, MANUALS, OR ADDITIONAL ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe | |
|
|
MORI SEIKI | NZX2500L |
MORI SEIKI NZX2500L CNC TURNING CENTER WITH M730BM CONTROL, HENNIG CDF CHIP FILTRATION SYSTEM, CHIPBLASTER HIGH PRESSURE COOLANT SYSTEM. CONTROL SCREEN DISPLAYS HEAD 1 AND HEAD 2 TIMER INFORMATION INCLUDING POWER ON TIME OF 35,193 HOURS, HEAD 1 CUTTING TIME OF 15,300 HOURS, AND HEAD 2 CUTTING TIME OF 14,729 HOURS. AUXILIARY EQUIPMENT INCLUDES HENNIG FILTRATION UNIT WITH LENZE CONTROL, PUMP ASSEMBLIES, HOSES, COOLANT FILTRATION TANKS, CHIPBLASTER CABINET, DETACHED SHEET METAL PANEL, AND RELATED CABLES AND PLUMBING. VISIBLE CONDITION INCLUDES COOLANT RESIDUE, STAINING, GRIME, PAINT WEAR, SCUFFS, OPEN CABINET DOORS, LOOSE HOSES/CABLES, AND GENERAL INDUSTRIAL-USE WEAR. S/N NZX25120516
|
🔒 Subscribe | |
|
|
MORI SEIKI | NZX 2500L |
2012 MORI SEIKI NZX 2500L CNC TURNING CENTER WITH HENNIG CHIP CONVEYOR, 208V, M730BM CONTROL. INCLUDES ATTACHED HENNIG CDF CHIP CONVEYOR AND CHIPBLASTER HIGH-PRESSURE COOLANT SYSTEM. CONTROL POWERS ON BUT DISPLAYS A PASSWORD LOCK MESSAGE. OPERATING CONDITION NOT VERIFIED. VISIBLE WEAR FROM PRIOR INDUSTRIAL USE, INCLUDING SCRATCHES, SCUFFS, RESIDUE, AND GENERAL SHOP WEAR. NO TOOLING, COLLETS, MANUALS, OR ADDITIONAL ACCESSORIES INCLUDED UNLESS SHOWN OR STATED. S/N NZX25121008
|
🔒 Subscribe | |
|
|
MORI SEIKI | NZX2500L |
MORI SEIKI NZX2500L CNC TURNING CENTER WITH M730BM CONTROL, HENNIG CDF CHIP FILTRATION SYSTEM, CHIPBLASTER HIGH PRESSURE COOLANT SYSTEM. DUAL-TURRET WORK AREA, MAIN SPINDLE AREA, INTERIOR GUARDING, OPERATOR CONTROL PANEL, ELECTRICAL CABINETS, SERVO DRIVE COMPONENTS, TERMINAL BLOCKS, WIRING, SIDE-MOUNTED CONTROL BUTTONS, CHIP CONVEYOR. CONTROL SCREEN DISPLAYS HEAD 1 AND HEAD 2 TIMER INFORMATION INCLUDING POWER ON TIME OF 30,940 HOURS, HEAD 1 CUTTING TIME OF 18,453 HOURS, AND HEAD 2 CUTTING TIME OF 19,784 HOURS. AUXILIARY EQUIPMENT INCLUDES COOLANT FILTRATION CABINET, PUMPS, FILTERS, HOSES, CHIP CONVEYOR/HOPPER ASSEMBLY, ELECTRICAL PANELS, AND DETACHED SHEET METAL PANEL. VISIBLE CONDITION INCLUDES COOLANT RESIDUE, STAINING, GRIME, PAINT WEAR, SCUFFS, RUST/CORROSION AROUND CONVEYOR AND ENCLOSURE AREAS, OPEN CABINET DOORS, LOOSE HOSES/CABLES, AND GENERAL INDUSTRIAL-USE WEAR. S/N NZX25121007
|
🔒 Subscribe | |
|
|
2017 | WEISSER | UNIVERTOR AS90/400L RT |
2017 WEISSER UNIVERTOR AS90/400L RT CNC LATHE WITH SIEMENS SINUMERIK 840D CONTROL. FEATURES LIVE TOOLING CAPABILITIES FOR MILLING, DRILLING, AND TAPPING. DESIGNED FOR MEDIUM AND LARGE PRODUCTION VOLUMES, OFFERING PRECISION AND PERFORMANCE FOR AUTOMOTIVE, AEROSPACE, AND GENERAL INDUSTRIAL MANUFACTURING.
|
🔒 Subscribe |
|
|
NITTOKU | OP10 |
NITTOKU OP10 SHAFT DRIVEN CENTERING MACHINE WITH FANUC SERIES 35I-MODEL B CONTROL, POWERED OPERATOR DISPLAY, PUSH-BUTTON OPERATING PANEL, STACK LIGHT, EMERGENCY STOP, X AND Y AXIS MARKINGS, SLIDING FRONT DOOR WITH VIEWING WINDOW, INTERIOR WORKHOLDING AND CENTERING COMPONENTS, MACHINE LIGHT, PNEUMATIC AIR LINE, COOLANT OR FLUID LINES, AND LOWER ACCESS OPENINGS. CONTROL SCREEN DISPLAYS TIMER INFORMATION INCLUDING PART TOTAL 3,831,133, POWER ON TIME OF 99,126 HOURS 37 MINUTES, RUN TIME OF 12,926 HOURS 25 MINUTES 52 SECONDS, AND CUTTING TIME OF 8,732 HOURS 17 MINUTES 57 SECONDS. INCLUDED HENNIG CHIP CONVEYOR/COOLANT HANDLING UNIT WITH CONVEYOR TROUGH, PUMP ASSEMBLIES, CONTROL ENCLOSURE, WIRING, HOSES, GAUGE, CASTERS, AND RELATED MOUNTED COMPONENTS. VISIBLE CONDITION INCLUDES COOLANT RESIDUE, STAINING, GRIME, PAINT WEAR, SCUFFS, SCRATCHES, INTERIOR BUILDUP, LOOSE OR ROUTED CABLES/HOSES, AND GENERAL INDUSTRIAL-USE WEAR.
|
🔒 Subscribe | |
|
|
2012 | NITTOKU | NCR 500MM |
2012 NITTOKU NCR 500MM SHAFT DRIVEN OPPOSED CENTERING MACHINE, SUPPLIED/INTEGRATED BY US KOSHIN, INC. MACHINE APPEARS TO BE A CNC/AUTOMATED PRODUCTION MACHINE USED FOR OPPOSED CENTERING/FACING OPERATIONS ON SHAFT-TYPE WORKPIECES. EQUIPPED WITH OPERATOR CONTROL PANEL, ENCLOSED WORK AREA, ELECTRICAL CABINET, HYDRAULIC/PNEUMATIC COMPONENTS, AND MACHINE GUARDING. ELECTRICAL CONTROL UNIT PLATE LISTS 208V, 3 PHASE, 60HZ, 125A FULL LOAD CURRENT, 45 KVA RATED LOAD, SERIAL NO. 1826, DATED 2012.10. FANUC CONTROL APPEARS PRESENT. CONDITION USED. UNTESTED BY SELLER. MODEL AND ELECTRICAL SPECS TAKEN FROM VISIBLE CONTROL UNIT PLATE.
|
🔒 Subscribe |
|
|
BRIDGEPORT | EZ TRAK SX |
BRIDGEPORT EZ TRAK SX VERTICAL MILLING MACHINE WITH ANILAM WIZARD DRO, 48 INCH X 9 INCH TABLE. UNIT INCLUDES BRIDGEPORT MILLING HEAD, QUILL AND SPINDLE ASSEMBLY, TABLE WITH T-SLOTS, SADDLE AND KNEE CONTROLS, HANDWHEELS, DRAWBAR AREA, ATTACHED ANILAM WIZARD DIGITAL READOUT/CONTROL DISPLAY WITH X, Y, AND Z MARKINGS, PENDANT/DISPLAY ARM, POWER CABLE, CHIP TRAY, AND VISIBLE LOOSE TOOLING INCLUDING DRILL CHUCK AND ASSORTED CUTTING TOOLS ON THE MACHINE TABLE/TRAY AREA. MACHINE SHOWS VISIBLE CHIPS, RESIDUE, OIL STAINING, SURFACE WEAR, PAINT WEAR, SCRATCHES, AND GENERAL SHOP-USE WEAR. (4) ASSORTED SECTIONS OF PALLET RACKING
|
🔒 Subscribe | |
|
|
2010 | NAGEL | TF4-20 |
2010 NAGEL TF4-20 CNC TAPE LAPPING MACHINE. MACHINE IS IDENTIFIED AS A NAGEL TF4-20 AND IS DESCRIBED AS A CNC TAPE LAPPING MACHINE FOR FINE FINISHING AND SURFACE REFINEMENT APPLICATIONS. VISIBLE FEATURES INCLUDE AN ENCLOSED MACHINE BODY, OPERATOR CONTROL PANEL, MITSUBISHI GOT1000 HMI, STACK LIGHT, INTERNAL TOOLING/WORK AREA, AND ELECTRICAL/CONTROL COMPONENTS. CONTROL PANEL IS MARKED 120 VOLTS. UNIT SHOWS VISIBLE WEAR FROM PRIOR INDUSTRIAL USE, INCLUDING SCUFFS, PAINT WEAR, RESIDUE, STAINING, AND GENERAL SHOP WEAR. NO ADDITIONAL TOOLING, FIXTURES, MANUALS, OR ACCESSORIES ARE INCLUDED UNLESS SHOWN OR STATED.
|
🔒 Subscribe |
|
|
BRIDGEPORT | EZ-PATH |
BRIDGEPORT EZ-PATH CNC LATHE, 480 V, 3 PHASE. UNIT INCLUDES ENCLOSED LATHE BASE, HEADSTOCK, 3-JAW CHUCK, BED/WAYS, CARRIAGE ASSEMBLY, HANDWHEEL, COOLANT LINES, CONTROL CABINET, BRIDGEPORT EZ-PATH SIDE PANEL, AND VISIBLE MACHINE-MOUNTED ELECTRICAL/SPECIFICATION PLATES. INCLUDED TOOLING SHOWN INCLUDES A DORIAN TOOL SUPERQUICK CHANGE TOOL POST, MODEL SD35CXA, ALONG WITH INSTALLED AND LOOSE TOOLHOLDING COMPONENTS. VISIBLE MARKINGS INCLUDE EZ-PATH BY BRIDGEPORT ON THE SIDE CABINET AND HANDWRITTEN 8 CENTER MARKING. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPPED PAINT, SURFACE GRIME, OIL RESIDUE, COOLANT STAINING, METAL SHAVINGS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED. LOADING FEE $50
|
🔒 Subscribe | |
|
|
CINCINNATI | HYDRASHIFT 15 |
CINCINNATI HYDRASHIFT 15 ENGINE LATHE WITH 15 X 54 IN CAPACITY. UNIT INCLUDES HEADSTOCK, BED/WAYS, CARRIAGE, CROSS SLIDE, COMPOUND, TAILSTOCK, HANDWHEELS, LEVERS, 3-JAW CHUCK, COOLANT LINE, ATTACHED WORK LIGHT, THREAD AND FEED CHART, HYDRASHIFT CONTROL PANEL, AND VISIBLE MACHINE-MOUNTED INSTRUCTION PLATES AND MARKINGS. VISIBLE MARKINGS INCLUDE CINCINNATI BRANDING ON THE HEADSTOCK AND HYDRASHIFT PANEL ON THE FRONT OF THE MACHINE. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPPED PAINT, SCUFFS, SURFACE GRIME, OIL RESIDUE, COOLANT STAINING, METAL SHAVINGS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED.
|
🔒 Subscribe | |
|
|
2020 | KEYARROW | KAH-200 |
2020 KEYARROW KAH-200 CHIP CONVEYOR, 72 INCH LENGTH, 32 INCH DISCHARGE. NEW CONDITION.
|
🔒 Subscribe |
|
|
POTTER & JOHNSTON MACH. CO. |
POTTER & JOHNSTON MACH. CO. TURNING MACHINE WITH 1.5 HP, 220/440 V MOTOR. UNIT INCLUDES MAIN MACHINE BASE, HORIZONTAL WORK AREA, TABLE SECTION, HANDWHEELS, LEVERS, SHAFTING, GUARDED BELT/DRIVE SECTION, ORANGE ELECTRICAL CONTROL BOX WITH CORD, AND VISIBLE MACHINE-MOUNTED TAGS AND MARKINGS. ADDITIONAL VISIBLE MARKINGS INCLUDE HANDWRITTEN STROKE NOTES ON THE FRONT OF THE MACHINE AND A TAG REFERENCING G.M. MACHINERY CO. AND ORDERING PARTS. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPS, SCUFFS, SURFACE GRIME, RESIDUE, METAL SHAVINGS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED.
|
🔒 Subscribe | ||
|
|
CINCINNATI MILACRON | HYDRA-SHIFT 22 |
CINCINNATI MILACRON HYDRA-SHIFT 22 ENGINE LATHE, 22 IN X 72 IN, WITH STEADY REST. 23.5 IN SWING OVER BED, 13.5 IN SWING OVER CROSS SLIDE, AND 72 IN DISTANCE BETWEEN CENTERS. VISIBLE COMPONENTS INCLUDE 3-JAW CHUCK, CARRIAGE, CROSS SLIDE, COMPOUND, TOOL POST, TAILSTOCK, HANDWHEELS, LEADSCREW, CHIP PAN, HYDRA-SHIFT CONTROL PANELS, FLEXIBLE COOLANT LINE, AND INCLUDED STEADY REST. MACHINE HAS VISIBLE SHOP WEAR, SURFACE GRIME, PAINT WEAR, CHIPS IN THE CHIP PAN, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE. OPERATIONAL STATUS IS NOT STATED.
|
🔒 Subscribe | |
|
|
BRIDGEPORT | EZ-TRAK SX |
BRIDGEPORT EZ-TRAK SX VERTICAL MILLING MACHINE WITH 480 V, 3 PHASE, 60 HZ ELECTRICAL RATING. UNIT INCLUDES VERTICAL MILLING HEAD, QUILL FEED ASSEMBLY, WORK TABLE, SADDLE/KNEE ASSEMBLY, HANDWHEELS, LEVERS, ATTACHED WORK LIGHT, COOLANT LINE, ELECTRICAL/CONTROL ENCLOSURE, EZ-TRAK SX BY BRIDGEPORT CONTROL PANEL WITH DISPLAY AND KEYPAD. ENCLOSURE PLATE SHOWS FULL LOAD CURRENT OF 4 AMPS AND RATING OF LARGEST MOTOR AS 5.1 AMPS. PAINT WEAR, SCUFFS, SURFACE GRIME, OIL RESIDUE, METAL SHAVINGS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE.
|
🔒 Subscribe | |
|
|
CINCINNATI MILACRON | CIM-X SERIES 30 |
CINCINNATI MILACRON CIM-X SERIES 30 HORIZONTAL MACHINING CENTER WITH KING REMANUFACTURE AND RETROFIT PLATE SHOWING MACHINE TYPE 30 INCH CIM-X. 480 V AC, 3 PHASE, 60 HZ. CNC CONTROL PANEL WITH SCREEN AND KEYPAD, ROTARY TABLE, 32 INCH X 32 INCH T-SLOTTED WORK SURFACE, VERTICAL COLUMN, SPINDLE HEAD AREA, SIDE TABLES, GUARDING PANELS, HANDWHEEL, WIRING, WORK LIGHT, AND TOOLING/TOOL STORAGE AREA. MACHINE HAS VISIBLE SHOP WEAR, PAINT WEAR, SURFACE GRIME, CHIPS AND DEBRIS ON THE TABLES AND BASE, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE. OPERATIONAL STATUS IS NOT STATED.
|
🔒 Subscribe | |
|
|
PRATT & WHITNEY CO. | M-1620 |
PRATT & WHITNEY CO. M-1620 JIG BORER WITH A 33 X 17 INCH TABLE. INCLUDES VERTICAL COLUMN, JIG BORER HEAD ASSEMBLY, SLOTTED WORK TABLE, MOUNTED VISE, HAND WHEELS, CONTROL LEVERS, WIRING, BASE-MOUNTED ELECTRICAL/CONTROL COMPONENTS, AND ANILAM ELECTRONICS DRO, MODEL 102-3. S/N 206
|
🔒 Subscribe | |
|
|
THOMPSON |
THOMPSON 48 INCH X 16 INCH TABLE SURFACE GRINDER, 230/460V, 5 HP. MACHINE HAS A WORN THOMPSON GRINDERS CO. IDENTIFICATION PLATE WITH SPRINGFIELD, OHIO MARKING; PLATE INFORMATION IS PARTIALLY ILLEGIBLE. VISIBLE CONTROL PANEL INCLUDES LABELED CONTROLS FOR HYDRAULIC PUMP, SPINDLE, COOLANT PUMP, ELEVATION, TABLE, FIXTURE, INCH, AND MASTER FUNCTIONS, WITH START, STOP, UP, AND DOWN PUSH BUTTONS WHERE APPLICABLE. UNIT SHOWS VISIBLE PAINT WEAR, CHIPS, GRIME, RESIDUE, AND GENERAL SHOP-USE WEAR ON THE CONTROL PANEL, NAMEPLATE AREA, AND MACHINE SURFACES.
|
🔒 Subscribe | ||
|
|
1970 | GALLMEYER & LIVINGSTON | 370 |
1970 GALLMEYER & LIVINGSTON MODEL 370 GRAND RAPIDS SURFACE GRINDER, 24 X 12 IN TABLE, S/N 370257. UNIT INCLUDES MAIN MACHINE BASE, RECIPROCATING WORK TABLE, GRINDING HEAD/WHEEL GUARD ASSEMBLY, FRONT HANDWHEELS, FEED CONTROLS, CONTROL LEVERS, ORANGE ELECTRICAL/CONTROL CABINET, ATTACHED HOSES, COOLANT/FLUID COMPONENTS, AND LOWER WHEELED TANK/CART ASSEMBLY. VISIBLE LABELS INCLUDE GALLMEYER & LIVINGSTON MANUFACTURER PLATE, LUBRICATION INSTRUCTION PLATES. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPPED PAINT, SURFACE GRIME, OIL STAINING, RESIDUE, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE.
|
🔒 Subscribe |
|
|
FADAL | VMC6030HT |
2000 FADAL VMC6030HT VERTICAL MACHINING CENTER, FADAL CNC 88HS CONTROL, HYDRO SWEEP CHIP REMOVAL SYSTEM, S/N 9407486. ELECTRICAL TAG LISTS 230/440 VAC, 3 PHASE, 60 HZ, 45/22.5 A FULL LOAD CURRENT, 40/20 A AMPERAGE RATING OF LARGEST AC MOTOR, 200 KA SHORT CIRCUIT INTERRUPTING CAPACITY. INCLUDES ENCLOSED MACHINE BODY, FRONT SLIDING ACCESS DOORS, SPINDLE HEAD, TOOL CHANGER AREA, WORK TABLE, OPERATOR CONTROL PANEL, SIDE PANELS, MACHINE BASE, AND 4 MANUALS. VISIBLE CONDITION INCLUDES SHOP WEAR, SURFACE GRIME, STAINING, CHIPS/DEBRIS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE.
|
🔒 Subscribe | |
|
|
EX-CELL-O CORPORATION | 33-L |
EX-CELL-O CORPORATION STYLE 33-L THREAD GRINDER, 8 INCH SWING, 36 INCH CENTERS, 440 V, 3 PHASE. INCLUDES MAIN MACHINE BASE, BED/WAYS, HEADSTOCK/WORKHOLDING AREA, TAILSTOCK ASSEMBLY, GRINDING HEAD ASSEMBLY, HANDWHEELS, LEVERS, COOLANT LINE, CONTROL PANEL WITH MULTIPLE KNOBS AND SWITCHES, VISIBLE MOTOR, AND MACHINE-MOUNTED MANUFACTURER, PATENT, STYLE, AND ELECTRICAL PLATES. ELECTRICAL PLATE SHOWS WIRING DIAGRAM 5516, 440 V, 3 PHASE, AND 60 CYCLES. PAINT WEAR, CHIPPED PAINT, SURFACE GRIME, OIL RESIDUE, STAINING, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. S/N 5516
|
🔒 Subscribe | |
|
|
HURCO | KM3P |
HURCO KM3P CNC VERTICAL MILLING MACHINE WITH ULTIMAX II CONTROL, S/N KDB-8004099E, 240 V, 3 PHASE, 60 HZ ELECTRICAL RATING. MACHINE TAG LISTS 8 KVA FULL LOAD, 4 KVA LARGEST MOTOR, DIAGRAM NO. 704-0001-368, AND 100,000 AMP INTERRUPT CAPACITY. UNIT INCLUDES VERTICAL MILLING HEAD, SPINDLE ASSEMBLY, SLOTTED WORK TABLE, BASE, HANDWHEEL, CONTROL CONSOLE WITH DUAL-SCREEN ULTIMAX DISPLAY, OPERATOR BUTTONS, ATTACHED WIRING, AND VISIBLE MACHINE-MOUNTED IDENTIFICATION PLATE. CONTROL SCREEN DISPLAYS MACHINE TYPE KM3P, MAXIMUM X TRAVEL 24.0000, MAXIMUM Y TRAVEL 14.0000, MAXIMUM Z TRAVEL 5.0000, NUMBER OF AXES PRESENT 3, AND MAXIMUM SPINDLE SPEED 4000. INCLUDED ITEMS SHOWN INCLUDE HURCO ULTIMAX II PROGRAMMING/OPERATION MANUAL AND A BOX OF ASSORTED TOOLHOLDERS/TOOLING. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPPED PAINT, SURFACE GRIME, OIL RESIDUE, COOLANT/OIL STAINING, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED.
|
🔒 Subscribe | |
|
|
HARDINGE | HP5 |
HARDINGE HP5 LATHE, 2 HP, 220 V MOTOR. UNIT INCLUDES MAIN CABINET BASE, HEADSTOCK, SPINDLE AREA, CARRIAGE/CROSS-SLIDE ASSEMBLY, TURRET/TOOLING AREA, HANDWHEELS, LEVERS, WORK LIGHT, VISIBLE COOLANT/LUBRICATION LINES, REAR-MOUNTED MOTOR/DRIVE COMPONENTS, AND HARDINGE MANUFACTURER BADGE MARKED HARDINGE BROTHERS INC., ELMIRA, N.Y., U.S.A. ASSET TAG MARKED ASSET NO. 719. VISIBLE CONDITION INCLUDES PAINT WEAR, SCUFFS, SURFACE GRIME, OIL RESIDUE, METAL SHAVINGS, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED. UNTESTED. SOLD AS-IS.
|
🔒 Subscribe | |
|
|
2016 | SIN MIN INDUSTRIES | V1000 |
2016 SIN MIN INDUSTRIES V1000 CHIP CONVEYOR, 84 INCH X 7 INCH, 44 INCH DISCHARGE. NEW CONDITION.
|
🔒 Subscribe |
|
|
CLEMCO | PULSAR |
CLEMCO PULSAR PRESSURE BLAST CABINET WITH RECLAMATION UNIT, 600 CFM, USED
|
🔒 Subscribe | |
|
|
DEMAG | DC-PRO 10-500 |
NEW DEMAG DC-PRO 10-500 ELECTRIC CHAIN HOIST. SWL 1100 LB.
|
🔒 Subscribe | |
|
|
CINCINNATI | TOOL AND CUTTER GRINDER |
CINCINNATI TOOL AND CUTTER GRINDER, 440 V, 3 PHASE, S/N 31512T5Y-0068. UNIT INCLUDES MAIN CABINET BASE, LONGITUDINAL TABLE, GRINDING HEAD/WHEEL ASSEMBLY, WORKHEAD/TAILSTOCK COMPONENTS, HANDWHEELS, FEED CONTROLS, LEVERS, ADJUSTABLE COOLANT LINE, ATTACHED WORK LIGHT, FRONT CONTROL PANEL WITH START/STOP BUTTONS AND SELECTOR SWITCHES, AND ACCESSIBLE ELECTRICAL CABINET WITH WIRING AND INTERNAL COMPONENTS VISIBLE. CONTROL PLATE INDICATES 60 HZ, 115 V CONTROL AC, AND 30 AMP INTERRUPTING CAPACITY. VISIBLE CONDITION INCLUDES PAINT WEAR, CHIPPED PAINT, SURFACE GRIME, OIL STAINING, RESIDUE, AND GENERAL COSMETIC WEAR FROM INDUSTRIAL USE AND STORAGE. OPERATING CONDITION HAS NOT BEEN VERIFIED.
|
🔒 Subscribe | |
|
|
MOHAWK | 308 |
MOHAWK 308 DRILL GRINDER, 220V, 3 PHASE, S/N 308177. INCLUDES ENCLOSED BASE, CIRCULAR GRINDING WHEEL HOUSING, ADJUSTABLE GRINDING FIXTURE, HANDWHEEL, LEVERS, SPINDLE/MANDREL COMPONENTS, WORKHOLDING ARMS, MOUNTED STACKED TOOLING OR CUTTER SET, VISIBLE ROTATION MARKING, AND ATTACHED HOSE OR CONDUIT. MACHINE SHOWS VISIBLE DUST, RESIDUE, PAINT WEAR, GRIME, SCRATCHES, AND GENERAL SHOP-USE WEAR.
|
🔒 Subscribe | |
|
|
DOALL | METALMASTER V-36 |
DOALL METALMASTER V-36 VERTICAL BAND SAW WITH 30 IN. X 30.5 IN. TABLE AND DOALL SUPPLY CABINET. MACHINE INCLUDES SAW BODY, BLADE AREA, FRONT CONTROL PANEL, DOALL JOB SELECTOR DIAL, TABLE SURFACE, FOOT PEDAL, SIDE CABINET, ATTACHED HOSE/NOZZLE ASSEMBLY, AND LOWER CHIP OR SCRAP TRAY. SUPPLY CABINET IDENTIFICATION PLATE IS MARKED DOALL SUPPLY CABINET, CONTINENTAL MACHINES, INC., MINNEAPOLIS, MINN., AND INDICATES SAW BANDS 120 TO 163 LONG AND FILE BANDS 159 LONG. UNIT SHOWS VISIBLE PAINT WEAR, SURFACE SCRATCHES, DUST, RESIDUE, AND GENERAL SHOP-USE WEAR ON THE MACHINE, TABLE, CABINET, AND CONTROL AREAS. OPERATING CONDITION HAS NOT BEEN VERIFIED.
|
🔒 Subscribe | |
|
|
WELLS METALBANDS | 5-M-42 |
WELLS METALBANDS 5-M-42 HORIZONTAL BAND SAW. UNIT INCLUDES SAW FRAME, BLADE HOUSING, VISE/WORKHOLDING AREA, FEED ARM ASSEMBLY, HANDWHEEL, BASE LEGS, MOTOR DRIVE ASSEMBLY, BELT/DRIVE GUARD AREA, AND ATTACHED POWER CORD. MANUFACTURER PLATE IS MARKED WELLS METAL BAND SAW, THREE RIVERS, MICHIGAN. MOTOR IDENTIFICATION TAG IS PRESENT AND APPEARS TO INDICATE A BOSTON GEAR MOTOR WITH 115/230 VOLT ELECTRICAL RATING, 1 PHASE, 60 HZ, AND 1/3 HP. UNIT SHOWS VISIBLE DUST, RESIDUE, PAINT WEAR, SCRATCHES, SURFACE GRIME, AND GENERAL SHOP-USE WEAR.
|
🔒 Subscribe |
KYSOR JOHNSON H250-SA
2000 KYSOR JOHNSON H250-SA HORIZONTAL BAND SAW, 3-PHASE, 4-POLE. UNTESTED....
LOVESHAW LITTLE DAVID
LOVESHAW LITTLE DAVID CASE SEALER. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING...
KALAMAZOO H9AW
2000 KALAMAZOO H9AW BAND SAW. 110V. WORKING UNIT...
LASSCO WIZER FMMH-3.1
LASSCO WIZER FMMH-3.1 3-SPINDLE PAPER DRILL PRESS, USED - USED LASSCO WIZER FMMH-3.1 3-SPINDLE PAPER...
UNITED AIR SPECIALISTS SFC-2-1-DD
2000 UNITED AIR SPECIALISTS SFC-2-1-DD DUST COLLECTOR, 5 HP, 460V, USED...
UNIFIED INDUSTRIES LIFT ASSIST
UNIFIED INDUSTRIES ELECTRIC LIFT ASSIST. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. T...
FOX IV 3000S
FOX IV 3000S PRINT AND APPLY LABELING SYSTEM. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL U...
LOVESHAW 19SB
LOVESHAW 19SB SEMI-AUTOMATIC SIDE-BELT CASE SEALER, FOR PARTS OR REPAIR - USED LOVESHAW 19SB CASE SE...
COFFING EC-4008
2000 COFFING EC-4008 ELECTRIC CHAIN HOIST, 2 TON CAPACITY. UNIT IS USED AND MAY SHOW WEAR FROM PRIOR...
EAGLE MANUFACTURING 1904
1904 SAFETY STORAGE CABINET, 4 GAL, USED - EAGLE 1904 STORAGE CABINET. UNIT IS LISTED WITH 4 GAL. IT...
CALDWELL 90-3-48
CALDWELL 90-3-48 STRONG-BAC PALLET LIFT, 6000 LB CAPACITY, USED - USED CALDWELL 90-3-48 PALLET LIFT....
DANTHERM R040-160-CW
DANTHERM R040-160-CW FILTRATION DUST COLLECTOR, USED - USED DANTHERM R040-160-CW DUST COLLECTOR. ITE...
GOSSLING 200-13797-03-3B
200-13797-03-3B MAGNETIC SLIDE CONVEYOR FOR FERROUS SCRAP, USED - USED DR. ING. GOSSLING GMBH 200-13...
YEOMAN
YEOMAN PNEUMATIC LIFT TABLES. YEOMAN LIFT TABLE. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIA...
VESTIL PS-4045
VESTIL PS-4045 ADJUSTABLE PALLET STAND, 5000 LB CAPACITY. UNIT IS LISTED WITH 5000 LB CAPACITY. ITEM...
AGET 800 DUSTKOP
AGET 800 DUSTKOP CYCLONE DUST COLLECTOR, 3/4 HP, 575V, USED. UNIT IS LISTED WITH 575V, 3/4 HP. ITEM ...
MAXUS 6ZA36
MAXUS 6ZA36 PORTABLE ABRASIVE BLASTER, USED - USED MAXUS 6ZA36 ABRASIVE BLASTER. ITEM IS USED AND MA...
KNIGHT GLOBAL LT4860
KNIGHT GLOBAL LT4860 LIFT TABLE. ITEM IS USED AND MAY SHOW WEAR FROM PRIOR INDUSTRIAL USE. TESTING H...
2003 FADAL VMC8030 HT
2003 FADAL VMC8030 HT VERTICAL MACHINING CENTER WITH 240 V 3 PHASE, 50/60 HZ, 50 A FULL LOAD CURRENT...
DOOSAN DOOTURN-4
DOOSAN DOOTURN-4 CNC TURNING CENTER, FANUC SERIES 18-T CONTROL, STEELTRAK CHIP CONVEYOR, S/N LND0085...
MORI SEIKI NZX 2500 L
MORI SEIKI NZX 2500 L CNC TURNING CENTER WITH CHIP CONVEYOR AND COOLANT SYSTEM, 208V, S/N NZX2512100...
MORI SEIKI NZX2500L
MORI SEIKI NZX2500L CNC TURNING CENTER WITH M730BM CONTROL, HENNIG CDF CHIP FILTRATION SYSTEM, CHIPB...
MORI SEIKI NZX 2500L
2012 MORI SEIKI NZX 2500L CNC TURNING CENTER WITH HENNIG CHIP CONVEYOR, 208V, M730BM CONTROL. INCLUD...
MORI SEIKI NZX2500L
MORI SEIKI NZX2500L CNC TURNING CENTER WITH M730BM CONTROL, HENNIG CDF CHIP FILTRATION SYSTEM, CHIPB...
2017 WEISSER UNIVERTOR AS90/400L RT
2017 WEISSER UNIVERTOR AS90/400L RT CNC LATHE WITH SIEMENS SINUMERIK 840D CONTROL. FEATURES LIVE TOO...
NITTOKU OP10
NITTOKU OP10 SHAFT DRIVEN CENTERING MACHINE WITH FANUC SERIES 35I-MODEL B CONTROL, POWERED OPERATOR ...
2012 NITTOKU NCR 500MM
2012 NITTOKU NCR 500MM SHAFT DRIVEN OPPOSED CENTERING MACHINE, SUPPLIED/INTEGRATED BY US KOSHIN, INC...
BRIDGEPORT EZ TRAK SX
BRIDGEPORT EZ TRAK SX VERTICAL MILLING MACHINE WITH ANILAM WIZARD DRO, 48 INCH X 9 INCH TABLE. UNIT ...
2010 NAGEL TF4-20
2010 NAGEL TF4-20 CNC TAPE LAPPING MACHINE. MACHINE IS IDENTIFIED AS A NAGEL TF4-20 AND IS DESCRIBED...
BRIDGEPORT EZ-PATH
BRIDGEPORT EZ-PATH CNC LATHE, 480 V, 3 PHASE. UNIT INCLUDES ENCLOSED LATHE BASE, HEADSTOCK, 3-JAW CH...
CINCINNATI HYDRASHIFT 15
CINCINNATI HYDRASHIFT 15 ENGINE LATHE WITH 15 X 54 IN CAPACITY. UNIT INCLUDES HEADSTOCK, BED/WAYS, C...
2020 KEYARROW KAH-200
2020 KEYARROW KAH-200 CHIP CONVEYOR, 72 INCH LENGTH, 32 INCH DISCHARGE. NEW CONDITION....
POTTER & JOHNSTON MACH. CO.
POTTER & JOHNSTON MACH. CO. TURNING MACHINE WITH 1.5 HP, 220/440 V MOTOR. UNIT INCLUDES MAIN MACHINE...
CINCINNATI MILACRON HYDRA-SHIFT 22
CINCINNATI MILACRON HYDRA-SHIFT 22 ENGINE LATHE, 22 IN X 72 IN, WITH STEADY REST. 23.5 IN SWING OVER...
BRIDGEPORT EZ-TRAK SX
BRIDGEPORT EZ-TRAK SX VERTICAL MILLING MACHINE WITH 480 V, 3 PHASE, 60 HZ ELECTRICAL RATING. UNIT IN...
CINCINNATI MILACRON CIM-X SERIES 30
CINCINNATI MILACRON CIM-X SERIES 30 HORIZONTAL MACHINING CENTER WITH KING REMANUFACTURE AND RETROFIT...
PRATT & WHITNEY CO. M-1620
PRATT & WHITNEY CO. M-1620 JIG BORER WITH A 33 X 17 INCH TABLE. INCLUDES VERTICAL COLUMN, JIG BORER ...
THOMPSON
THOMPSON 48 INCH X 16 INCH TABLE SURFACE GRINDER, 230/460V, 5 HP. MACHINE HAS A WORN THOMPSON GRINDE...
1970 GALLMEYER & LIVINGSTON 370
1970 GALLMEYER & LIVINGSTON MODEL 370 GRAND RAPIDS SURFACE GRINDER, 24 X 12 IN TABLE, S/N 370257. UN...
FADAL VMC6030HT
2000 FADAL VMC6030HT VERTICAL MACHINING CENTER, FADAL CNC 88HS CONTROL, HYDRO SWEEP CHIP REMOVAL SYS...
EX-CELL-O CORPORATION 33-L
EX-CELL-O CORPORATION STYLE 33-L THREAD GRINDER, 8 INCH SWING, 36 INCH CENTERS, 440 V, 3 PHASE. INCL...
HURCO KM3P
HURCO KM3P CNC VERTICAL MILLING MACHINE WITH ULTIMAX II CONTROL, S/N KDB-8004099E, 240 V, 3 PHASE, 6...
HARDINGE HP5
HARDINGE HP5 LATHE, 2 HP, 220 V MOTOR. UNIT INCLUDES MAIN CABINET BASE, HEADSTOCK, SPINDLE AREA, CAR...
2016 SIN MIN INDUSTRIES V1000
2016 SIN MIN INDUSTRIES V1000 CHIP CONVEYOR, 84 INCH X 7 INCH, 44 INCH DISCHARGE. NEW CONDITION....
CLEMCO PULSAR
CLEMCO PULSAR PRESSURE BLAST CABINET WITH RECLAMATION UNIT, 600 CFM, USED...
DEMAG DC-PRO 10-500
NEW DEMAG DC-PRO 10-500 ELECTRIC CHAIN HOIST. SWL 1100 LB....
CINCINNATI TOOL AND CUTTER GRINDER
CINCINNATI TOOL AND CUTTER GRINDER, 440 V, 3 PHASE, S/N 31512T5Y-0068. UNIT INCLUDES MAIN CABINET BA...
MOHAWK 308
MOHAWK 308 DRILL GRINDER, 220V, 3 PHASE, S/N 308177. INCLUDES ENCLOSED BASE, CIRCULAR GRINDING WHEEL...
DOALL METALMASTER V-36
DOALL METALMASTER V-36 VERTICAL BAND SAW WITH 30 IN. X 30.5 IN. TABLE AND DOALL SUPPLY CABINET. MACH...
WELLS METALBANDS 5-M-42
WELLS METALBANDS 5-M-42 HORIZONTAL BAND SAW. UNIT INCLUDES SAW FRAME, BLADE HOUSING, VISE/WORKHOLDIN...