Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More
Category: TRUCKS, TRAILERS & VEHICLES
Total Lots:
371
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
PFEIFER DRAKO LTD | 6X36WS-WC |
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG
|
🔒 Subscribe | |
|
|
2020 | BAOLI |
2020 BAOLI 5 TONNE DIESEL FORKLIFT WITH 4.5M MAST WITH SIDE SHIFT & FORK POSITION, 4252 HOURS. GOOD TYRES ALL ROUND, WELL MAINTAINED.
|
🔒 Subscribe | |
|
|
2018 | RUIZHOU | RZCRT5-2516 |
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516
|
🔒 Subscribe |
|
|
MITSUBISHI |
MITSUBISHI 10 TONNE DIESEL FORKLIFT, 4.5M LIFT, SIDE SHIFT & FORK POSITIONER
|
🔒 Subscribe | ||
|
|
MITUTOYO | INTERNAL MICROMETER (STICK/TUBULAR) |
MITUTOYO INTERNAL MICROMETER (STICK/TUBULAR) USED, SIGNS OF WEAR
|
🔒 Subscribe | |
|
|
WADKIN | CUT PRO 14 |
WADKIN 400 VOLT OVERHEAD CUT PRO 14 CHOP SAW. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. GOOD WORKING CONDITION, VERY WELL MAINTAINED. USED FOR SET MANUFACTURING IN THE FILM AND TV INDUSTRY.
|
🔒 Subscribe | |
|
|
2016 | HELI |
2016 HELI 2.5 TONNE GAS FORKLIFT, ONLY 1345 HOURS, APPLIANCE CLAMP, SIDE SHIFT, GOOD NON MARKING TYRES
|
🔒 Subscribe | |
|
|
KUKA | KR210 R2700 PRIME |
KUKA INDUSTRIAL ROBOT KR210 R2700 PRIME COMPLETE WITH KRC4 CONTROLLER, TOOL EXCHANGE STAND AND CHILLER. A SERVICE IS RECOMMENDED AFTER NEW INSTALL.
|
🔒 Subscribe | |
|
|
2020 | UNIFY | HIGH FREQUENCY MACHINE |
2020 UNIFY HIGH FREQUENCY MACHINE. CONDITION: USED, GOOD.
|
🔒 Subscribe |
|
|
2023 | GRUNDFOS |
GRUNDFOS PUMP, NEVER BEEN INSTALLED, 0 RUNNING HOURS, FLOW RATE: 293.9M3/HR AT 71.2M, PORTS ARE CAPPED, WEIGHT: 1.1 TONNES, PURCHASED ON 31/3/2023, SUFFERED MINOR COSMETIC DAMAGE
|
🔒 Subscribe | |
|
|
HIROX | HDX-20 |
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TONNE MACHINE. BRAND NEW AND UNUSED.
|
🔒 Subscribe | |
|
|
2016 | LINDE |
2016 LINDE 1.6 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, 4.6M MAST WITH SIDE SHIFT, 7075 HOURS, COMPLETE WITH CHARGER
|
🔒 Subscribe | |
|
|
1994 | NISSHINBO | HTP-1000 |
1994 NISSHINBO HTP-1000 CNC TURRET PUNCH PRESS. CAPACITY: 22 TON. 3 PHASE. VOLTAGE: 415V.
|
🔒 Subscribe |
|
|
AZ E-LITE | LT8B-209E |
AZ E-LITE AZCEL LT8B-E SERIES 2-FT T8 LED TUBES WITH STARTER/FUSE, LIKELY ~9W, COLOUR: COOL WHITE (840). QTY: 10 TUBES PER BOX, 10 CARTONS OF 10 TUBES. NEW IN CARTONS.
|
🔒 Subscribe | |
|
|
TOYOTA |
TOYOTA 3.5 TONNE GAS FORKLIFT 3.7 METRE LIFT, SIDE SHIFT, ONLY 5333 HOURS
|
🔒 Subscribe | ||
|
|
2016 |
2016 67 CUBIC YARD TRI AXLE TIPPING TRAILER HALDEX BRAKES NEW PADS ALL ROUND NEW DISCS ON REAR AXLE SAT AXLES WITH PAINTED HUBS HEIGHT ADJUSTABLE SUSPENSION DURABRIGHT ALLOYS 385/65/22.5 ELECTRIC SHEET ON BOARD WEIGHER (WIRED FOR PM, IN CAB DISPLAY) GRAIN HATCH AND SOCK STORAGE BOX ( LARGE) ADDITIONAL REVERSING AND WORK LIGHTS LED LIGHTS ALL ROUND FRONT GANTRY NEW SHEET MOTOR 12 MONTHS MOT ORIGINAL FLOOR WITH MINIMAL WEAR CHASSIS C404888
|
🔒 Subscribe | ||
|
|
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
|
🔒 Subscribe | |||
|
|
ROADCRUZA |
SET OF 4 ROADCRUZA VAN/COMMERCIAL 235/60/17 TYRES. UNUSED.
|
🔒 Subscribe | ||
|
|
2003 | LINDE | H25T |
2003 LINDE H25T LPG GAS COUNTERBALANCE FORK LIFT TRUCK 2500KG. USED - 6000 HOURS. TYPE: COUNTERBALANCE. POWER: LPG. CAPACITY: 2500KG. LIFT HEIGHT: 6180MM. CLOSED HEIGHT: 2680MM. UNLADEN WEIGHT: 3615KG. ALL WORKING & READY TO GO.
|
🔒 Subscribe |
|
|
ROADCRUZA | RA-350 |
ROADCRUZA RA-350 235/60 R17C COMMERCIAL TYRES SET OF 4 UNUSED LOAD RATING: 117/115T TYPE: VAN / COMMERCIAL
|
🔒 Subscribe | |
|
|
2003 | LIEBHERR | 964B |
2003 LIEBHERR 964B EXCAVATOR WITH MAGNET FITTED - VERY GOOD CONDITION AND UNDERCARRIAGE. MAGNET FITTED.
|
🔒 Subscribe |
|
|
2002 | LIEHERR | 934 |
2002 LIEBHERR 934 SCRAP HANDLER WITH HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH.
|
🔒 Subscribe |
|
|
2003 | LIEBHERR | 904 |
2003 LIEBHERR 904 SCRAP HANDLER, 10800 HOURS, LONG REACH ARM AND VERY GOOD UNDERCARRIAGE
|
🔒 Subscribe |
|
|
2010 | LIEBHERR | 904C |
2010 LIEBHERR 904C SCRAP HANDLER WITH HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH.
|
🔒 Subscribe |
|
|
2017 | TCM |
2017 TCM 2.5 TONNE GAS FORKLIFT, CONTAINER SPEC, 2.5 TONNE LIFT 3617 HOURS, 4.5M TRIPLE MAST, SIDE SHIFT AND 4TH SERVICE GOOD CONDITION
|
🔒 Subscribe | |
|
|
2005 | JCB | TLT30D |
2005 JCB TLT30D TELEHANDLER, 13,800 HOURS, DIESEL 3 TONNE TELETRUK WITH FORKS
|
🔒 Subscribe |
|
|
2015 | PEUGEOT | BOXER |
2015 PEUGEOT BOXER 2.2 LITRE DIESEL WHITE STARTS AND DRIVES CLEAN INTERIOR FULLY SHELVED REGISTRATION NUMBER: MA15 WVS MOT EXPIRED 17TH NOVEMBER 2024 CURRENTLY SORN LAST MOT WAS A CLEAR PASS WITH NO ADVISORIES ON 18TH NOVEMBER 20123 AT 127,512 MILES DATE FIRST REGISTERED: 31ST MARCH 2015
|
🔒 Subscribe |
|
|
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
|
🔒 Subscribe | |||
|
|
TAYLOR | STUD WELDING MACHINE |
TAYLOR STUD WELDING MACHINE WITH A BRAND NEW WELD GUN, ORIGINAL GUN AND CLAMPS ATTACHED TO THE MAIN WELD CAPACITOR BOX GUN PRESS HOLDER FOR ACCURATE WELD POSITIONING. INCLUDES OPERATING MANUALS AND INVENTORY BOOK. CAPABLE OF WELDING DIFFERENT MATERIALS, WITH A WELD SHEET FOR VOLTAGE SETTINGS FOR EACH STUD TYPE. INCLUDES BOXES OF STUD STOCK (ALI, STEEL, BRASS). S/N:
|
🔒 Subscribe | |
|
|
BRIDGESTONE | ALENZA |
BRIDGESTONE 275/50R19 ALENZA TYRES SET OF 4 UNUSED
|
🔒 Subscribe | |
|
|
2007 | NIFTYLIFT | HR17NE |
2007 NIFTYLIFT HR17NE 17M WORKING HEIGHT
|
🔒 Subscribe |
|
|
BASLER | PIA1000 48GM |
2X BASLER PIA1000 48GM GIG-E CAMERA, 1X BASLER SCA1400 17GM GIG-E CAMERA, 9X BASLER SCA1390 1 7GM GIG-E CAMERA, 5X BASLER A631F FIREWIRE CAMERA
|
🔒 Subscribe | |
|
|
F J EDWARDS | TREADLE GUILLOTINE |
F J EDWARDS TREADLE GUILLOTINE, ORIGINAL MAKE UP HAS NOT BEEN ALTERED, GUILLOTINE BLADE HAS BEEN SHARPENED OVER TIME. TAPE MEASURE IN SHOTS SHOWS LENGTH OF GUILLOTINE AND LENGTH OF CUTTING AREA AND THE HEIGHT OF THE GUILLOTINE. PHOTO 10 SHOWS THE BACK PLATE STOPPER BAR WITH THE TWO STEEL POLES IT SITS ON WHICH IS NORMALLY ATTACHED TO THE REAR OF THE GUILLOTINE. THESE HAVE BEEN TAKEN OFF JUST SO IT CAN SIT BACK AGAINST THE WALL DURING THE CLEAR OUT. VERY HEAVY ITEM. S/N:
|
🔒 Subscribe | |
|
|
2019 | DAF TRUCKS | CF 450 TIPPER |
2019 DAF CF EURO 6 32 TON TIPPER WITH STEEL TIPPING BODY, MANUAL GEARBOX, EURO 6. APPROXIMATE MILEAGE 164450 MILES OR 264,658 KM'S. VALID MOT TO 31ST DECEMBER 2025. EXTERIOR COLOUR WHITE. HORSEPOWER (BHP) 462. ENGINE SIZE 10837. GROSS VEHICLE WEIGHT 3200. RIGHT-HAND DRIVE. FUEL TYPE DIESEL. COMPREHENSIVE SERVICE FOLDER, LONG TEST, REFURBISHED BODY.
|
🔒 Subscribe |
|
|
HIROX | HDX-10 |
HIROX HDX-10 HYDRAULIC BREAKER TO SUIT 2-4 TON MACHINE PIN SIZE 35MM DIMENSIONS ON THE HEADSTOCK ARE: 140MM WIDTH AND 140MM CENTRE
|
🔒 Subscribe | |
|
|
GROUP OF STAINLESS STEEL TANKS, 5 IN TOTAL, 7M LONG. 2 STAINLESS STEEL TANKS ARE 1500MM HIGH AND 800MM WIDE. 3 STAINLESS STEEL TANKS ARE 800MM WIDE. HEATERS CAN BE ADDED TO THE 2 X 900MM WIDE TANKS. ALL ARE REINFORCED WITH BANDS AROUND. THEY ALL HAVE STAINLESS STEEL GUIDES TO PREVENT ANY DAMAGE TO THE WALLS WHICH CAN BE CAUSED BY BASKETS BEING LOWERED AND RAISED INTO/OUT OF THE TANKS. ALSO INCLUDES SMALL TANKS ON THE END TO ALLOW FOR FRESH WATER CIRCULATION IF IT IS NEEDED.
|
🔒 Subscribe | |||
|
|
HIROX | HDX-05 |
HIROX HDX-05 HYDRAULIC BREAKER TO SUIT 1-2.7 TON MACHINE
|
🔒 Subscribe | |
|
|
HIROX | HDX-08 |
HIROX HDX-08 HYDRAULIC BREAKER TO SUIT .8 -1.5 TON MACHINE
|
🔒 Subscribe | |
|
|
SENCO |
3 X SENCO PNEUMATIC STAPLE GUNS WITH CARRY CASES, MANUALS, ACCESSORIES & 6M RETRACTABLE HOSE REELS. MANUFACTURER: SENCO. TYPE: PNEUMATIC STAPLE GUNS. OPERATING PRESSURE: TYPICALLY UP TO 120 PSI / 8.3 BAR (MODEL DEPENDENT). APPLICATIONS: UPHOLSTERY, JOINERY, FURNITURE, INTERIOR FIT-OUT. AIR SUPPLY: STANDARD COMPRESSED AIR CONNECTION.
|
🔒 Subscribe | ||
|
|
HIFLY | XL 265/50/20 |
SET OF 4 HIFLY TYRES XL 265/50/20 UNUSED
|
🔒 Subscribe | |
|
|
FALKEN | SINCERA |
SET OF 4 FALKEN SINCERA TYRES 175/65/17 UNUSED
|
🔒 Subscribe | |
|
|
UNIGRIP | TYRES XL |
SET OF 4 UNIGRIP TYRES XL 275/40/21. UNUSED. 12 SETS AVAILABLE.
|
🔒 Subscribe | |
|
|
MICHELIN | DIAMARIES |
PAIR OF MICHELIN DIAMARIES TYRES 255/55/18, SET OF 2 UNUSED
|
🔒 Subscribe | |
|
|
LARGE SITE CHEST DIMENSIONS: HEIGHT: 93CM; LENGTH: 150CM; WIDTH: 100CM ESTIMATED WEIGHT 150KG - 200KGS
|
🔒 Subscribe | |||
|
|
BUNTING | MTRA1013A |
BRAND NEW BUNTING MTRA1013A AIR COOLED TRANSFORMER RECTIFIER DIMENSIONS: LENGTH: 750MM; WIDTH: 530MM; HEIGHT: 1130MM WEIGHT: 260KG
|
🔒 Subscribe | |
|
|
PFEIFER DRAKO LTD | 6X36WS-WC |
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG
|
🔒 Subscribe | |
|
|
CATERPILLAR | 613B |
CATERPILLAR SELF ELEVATING SCRAPER 613B CAT 3208 V8 DIESEL
|
🔒 Subscribe | |
|
|
VANGO | AIR AWNING |
VANGO AIR AWNING COMES WITH ALL ACCESSORIES PUMP THAT INFLATES AND DEFLATES GROUND SHEET PEGS AND BAG
|
🔒 Subscribe | |
|
|
IMAC POWER PRODUCTS | MAGNUM |
MAGNUM BELT-DRIVE PISTON COMPRESSOR MANUFACTURED BY IMAC POWER PRODUCTS 200 LITRE HORIZONTAL RECEIVER, TWIN-CYLINDER PUMP, MESH BELT GUARD VISIBLE SURFACE RUST ON RECEIVER
|
🔒 Subscribe | |
|
|
BRIDGESTONE | TURANZA |
BRIDGESTONE 235/60/17 TURANZA TYRES, SET OF 2 UNUSED
|
🔒 Subscribe |
PFEIFER DRAKO LTD 6X36WS-WC
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG...
2020 BAOLI
2020 BAOLI 5 TONNE DIESEL FORKLIFT WITH 4.5M MAST WITH SIDE SHIFT & FORK POSITION, 4252 HOURS. GOOD ...
2018 RUIZHOU RZCRT5-2516
2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516...
MITSUBISHI
MITSUBISHI 10 TONNE DIESEL FORKLIFT, 4.5M LIFT, SIDE SHIFT & FORK POSITIONER...
MITUTOYO INTERNAL MICROMETER (STICK/TUBULAR)
MITUTOYO INTERNAL MICROMETER (STICK/TUBULAR) USED, SIGNS OF WEAR...
WADKIN CUT PRO 14
WADKIN 400 VOLT OVERHEAD CUT PRO 14 CHOP SAW. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. GOOD WORKI...
2016 HELI
2016 HELI 2.5 TONNE GAS FORKLIFT, ONLY 1345 HOURS, APPLIANCE CLAMP, SIDE SHIFT, GOOD NON MARKING TYR...
KUKA KR210 R2700 PRIME
KUKA INDUSTRIAL ROBOT KR210 R2700 PRIME COMPLETE WITH KRC4 CONTROLLER, TOOL EXCHANGE STAND AND CHILL...
2020 UNIFY HIGH FREQUENCY MACHINE
2020 UNIFY HIGH FREQUENCY MACHINE. CONDITION: USED, GOOD....
2023 GRUNDFOS
GRUNDFOS PUMP, NEVER BEEN INSTALLED, 0 RUNNING HOURS, FLOW RATE: 293.9M3/HR AT 71.2M, PORTS ARE CAPP...
HIROX HDX-20
HIROX HDX-20 HYDRAULIC BREAKER TO SUIT 4-8 TONNE MACHINE. BRAND NEW AND UNUSED....
2016 LINDE
2016 LINDE 1.6 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, 4.6M MAST WITH SIDE SHIFT, 7075 HOURS, COMPL...
1994 NISSHINBO HTP-1000
1994 NISSHINBO HTP-1000 CNC TURRET PUNCH PRESS. CAPACITY: 22 TON. 3 PHASE. VOLTAGE: 415V....
AZ E-LITE LT8B-209E
AZ E-LITE AZCEL LT8B-E SERIES 2-FT T8 LED TUBES WITH STARTER/FUSE, LIKELY ~9W, COLOUR: COOL WHITE (8...
TOYOTA
TOYOTA 3.5 TONNE GAS FORKLIFT 3.7 METRE LIFT, SIDE SHIFT, ONLY 5333 HOURS...
2016
2016 67 CUBIC YARD TRI AXLE TIPPING TRAILER HALDEX BRAKES NEW PADS ALL ROUND NEW DISCS ON REAR AXLE ...
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
ROADCRUZA
SET OF 4 ROADCRUZA VAN/COMMERCIAL 235/60/17 TYRES. UNUSED....
2003 LINDE H25T
2003 LINDE H25T LPG GAS COUNTERBALANCE FORK LIFT TRUCK 2500KG. USED - 6000 HOURS. TYPE: COUNTERBALAN...
ROADCRUZA RA-350
ROADCRUZA RA-350 235/60 R17C COMMERCIAL TYRES SET OF 4 UNUSED LOAD RATING: 117/115T TYPE: VAN / COMM...
2003 LIEBHERR 964B
2003 LIEBHERR 964B EXCAVATOR WITH MAGNET FITTED - VERY GOOD CONDITION AND UNDERCARRIAGE. MAGNET FITT...
2002 LIEHERR 934
2002 LIEBHERR 934 SCRAP HANDLER WITH HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH....
2003 LIEBHERR 904
2003 LIEBHERR 904 SCRAP HANDLER, 10800 HOURS, LONG REACH ARM AND VERY GOOD UNDERCARRIAGE...
2010 LIEBHERR 904C
2010 LIEBHERR 904C SCRAP HANDLER WITH HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH....
2017 TCM
2017 TCM 2.5 TONNE GAS FORKLIFT, CONTAINER SPEC, 2.5 TONNE LIFT 3617 HOURS, 4.5M TRIPLE MAST, SIDE S...
2005 JCB TLT30D
2005 JCB TLT30D TELEHANDLER, 13,800 HOURS, DIESEL 3 TONNE TELETRUK WITH FORKS...
2015 PEUGEOT BOXER
2015 PEUGEOT BOXER 2.2 LITRE DIESEL WHITE STARTS AND DRIVES CLEAN INTERIOR FULLY SHELVED REGISTRATIO...
1X 600LTR IBC EXTRA CONCENTRATED TRUCK & PLANT WASH
TAYLOR STUD WELDING MACHINE
TAYLOR STUD WELDING MACHINE WITH A BRAND NEW WELD GUN, ORIGINAL GUN AND CLAMPS ATTACHED TO THE MAIN ...
BRIDGESTONE ALENZA
BRIDGESTONE 275/50R19 ALENZA TYRES SET OF 4 UNUSED...
2007 NIFTYLIFT HR17NE
2007 NIFTYLIFT HR17NE 17M WORKING HEIGHT...
BASLER PIA1000 48GM
2X BASLER PIA1000 48GM GIG-E CAMERA, 1X BASLER SCA1400 17GM GIG-E CAMERA, 9X BASLER SCA1390 1 7GM GI...
F J EDWARDS TREADLE GUILLOTINE
F J EDWARDS TREADLE GUILLOTINE, ORIGINAL MAKE UP HAS NOT BEEN ALTERED, GUILLOTINE BLADE HAS BEEN SHA...
2019 DAF TRUCKS CF 450 TIPPER
2019 DAF CF EURO 6 32 TON TIPPER WITH STEEL TIPPING BODY, MANUAL GEARBOX, EURO 6. APPROXIMATE MILEAG...
HIROX HDX-10
HIROX HDX-10 HYDRAULIC BREAKER TO SUIT 2-4 TON MACHINE PIN SIZE 35MM DIMENSIONS ON THE HEADSTOCK ARE...
GROUP OF STAINLESS STEEL TANKS, 5 IN TOTAL, 7M LONG. 2 STAINLESS STEEL TANKS ARE 1500MM HIGH AND 800
HIROX HDX-05
HIROX HDX-05 HYDRAULIC BREAKER TO SUIT 1-2.7 TON MACHINE...
HIROX HDX-08
HIROX HDX-08 HYDRAULIC BREAKER TO SUIT .8 -1.5 TON MACHINE...
SENCO
3 X SENCO PNEUMATIC STAPLE GUNS WITH CARRY CASES, MANUALS, ACCESSORIES & 6M RETRACTABLE HOSE REELS. ...
HIFLY XL 265/50/20
SET OF 4 HIFLY TYRES XL 265/50/20 UNUSED...
FALKEN SINCERA
SET OF 4 FALKEN SINCERA TYRES 175/65/17 UNUSED...
UNIGRIP TYRES XL
SET OF 4 UNIGRIP TYRES XL 275/40/21. UNUSED. 12 SETS AVAILABLE....
MICHELIN DIAMARIES
PAIR OF MICHELIN DIAMARIES TYRES 255/55/18, SET OF 2 UNUSED...
LARGE SITE CHEST DIMENSIONS: HEIGHT: 93CM; LENGTH: 150CM; WIDTH: 100CM ESTIMATED WEIGHT 150KG - 200K
BUNTING MTRA1013A
BRAND NEW BUNTING MTRA1013A AIR COOLED TRANSFORMER RECTIFIER DIMENSIONS: LENGTH: 750MM; WIDTH: 530MM...
PFEIFER DRAKO LTD 6X36WS-WC
60 METRE DRUM OF WIRE ROPE LENGTH; 60M WEIGHT: 192.60KG...
CATERPILLAR 613B
CATERPILLAR SELF ELEVATING SCRAPER 613B CAT 3208 V8 DIESEL...
VANGO AIR AWNING
VANGO AIR AWNING COMES WITH ALL ACCESSORIES PUMP THAT INFLATES AND DEFLATES GROUND SHEET PEGS AND BA...
IMAC POWER PRODUCTS MAGNUM
MAGNUM BELT-DRIVE PISTON COMPRESSOR MANUFACTURED BY IMAC POWER PRODUCTS 200 LITRE HORIZONTAL RECEIVE...
BRIDGESTONE TURANZA
BRIDGESTONE 235/60/17 TURANZA TYRES, SET OF 2 UNUSED...