• Items
  • Auctions
  • Auctioneers
  • Items
  • Auctions
  • Auctioneers

Timed OnLine Auction of a Precision Machining Job Shop

Ironside Machinery
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots: 225
Total Sales: 🔒 Subscribe
Lot Price Distribution
🔒
Subscribe to view
Unlock price distribution and full auction analytics
Sort:
Showing 1–50 of 225 lots
Year Make Model Lot Description Hammer Price
STANDARD MODERN 2060 STANDARD MODERN 2060
STANDARD MODERN 2060 ENGINE LATHE, 22" DIAMETER SWING, 60" BETWEEN CENTERS, 12" DIAMETER SWING OVER CROSS-SLIDE, 20" DIAMETER SWING OVER SADDLE, 3" BAR CAPACITY, INCH AND METRIC THREADING, 18-SPINDLE SPEED RANGES FROM 27 TO 1600 RPM, CARRIAGE WITH CROSS SLIDE AND QUICK CHANGE TOOL POST WITH HOLDERS, TAILSTOCK, 3-JAW CHUCK, 4-JAW CHUCK, STEADY REST, LATHER CENTERS, JACOBS TAILSTOCK DRILL CHUCKS AND ANILAM WIZARD 211 DIGITAL READ OUT
STANDARD MODERN · 2060
 🔒 Subscribe
2002 ACER DYNAMIC 1340G 2002 ACER DYNAMIC 1340G
2002 ACER DYNAMIC 1340G GAP BED LATHE, 13" SWING, 19" SWING OVER GAP, 40" BETWEEN CENTERS, 1-1/2" HOLE THROUGH SPINDLE, 8" SWING OVER CARRIAGE, TAIL STOCK, 8" DIAMETER 3-JAW CHUCK, NEWALL DP700 DIGITAL READ OUT
2002 · ACER · DYNAMIC 1340G
 🔒 Subscribe
SHIGIYA SEIKI GPA-32100 SHIGIYA SEIKI GPA-32100
SHIGIYA SEIKI GPA-32100 UNIVERSAL CYLINDRICAL GRINDER, SWING OVER TABLE 12-1/2", GRINDING DIAMETER 11", DISTANCE BETWEEN CENTERS 40", TABLE SWIVEL RANGE 10-DEGREES, WORKHEAD SWIVEL RANGE 120-DEGREES, LONGITUDINAL TABLE FEED .16 TO 10 FPM, WORKHEAD SPINDLE SPEED 20 TO 380 RPM, OVER WHEEL DRESSER, PAPER FILTRATION COOLANT, S/N 30032
SHIGIYA SEIKI · GPA-32100
 🔒 Subscribe
2004 ACER DYNAMIC 2080GA 2004 ACER DYNAMIC 2080GA
2004 ACER DYNAMIC 2080GA GAP BED LATHE, 20" SWING, 28" SWING OVER GAP, 80" BETWEEN CENTERS, 3" HOLE THROUGH SPINDLE, 12" SWING OVER CARRIAGE, STEADY REST, TAIL STOCK, 16" DIAMETER 4-JAW CHUCK, 12" DIAMETER 3-JAW CHUCK, NEWALL C80 DIGITAL READ OUT
2004 · ACER · DYNAMIC 2080GA
 🔒 Subscribe
SULLAIR SHOPTEK ST709 AC SULLAIR SHOPTEK ST709 AC
SULLAIR SHOPTEK ST709 AC SULL ROTARY SCREW AIR COMPRESSOR, HORIZONTAL TANK MOUNTED, 7.5KW, 125 PSIG, WITH SULLAIR SRS-50 REFRIGERATED AIR DRYER
SULLAIR · SHOPTEK ST709 AC
 🔒 Subscribe
HAAS HRT-310 HAAS HRT-310
HAAS HRT-310 4TH AXIS ROTARY TABLE WITH 12" DIAMETER FACE PLATE AND 10" DIAMETER 3-JAW CHUCK
HAAS · HRT-310
 🔒 Subscribe
STANDARD MODERN 1340 STANDARD MODERN 1340
STANDARD MODERN 1340 ENGINE LATHE, 13" DIAMETER SWING, 40" BETWEEN CENTERS, 7-3/4" DIAMETER SWING OVER CROSS-SLIDE, 1-1/3" BAR CAPACITY, INCH AND METRIC THREADING, 12-SPINDLE SPEED RANGES FROM 40 TO 2000 RPM, CARRIAGE WITH CROSS SLIDE AND QUICK CHANGE TOOL POST WITH HOLDERS, TAILSTOCK, 3-JAW CHUCK, 4-JAW CHUCK, LATHER CENTERS AND JACOBS TAILSTOCK DRILL CHUCKS
STANDARD MODERN · 1340
 🔒 Subscribe
ENCO X6320A ENCO X6320A
ENCO X6320A VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 36" X 8" T-SLOT TABLE WITH WORKHORSE AL-235 POWER CROSS FEED, SPINDLE SPEEDS 100 TO 3500 RPM, PLATINUM PLUS DIGITAL READ OUT
ENCO · X6320A
 🔒 Subscribe
1996 HAAS VF-4 1996 HAAS VF-4
1996 HAAS VF-4 CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 50", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 25", CAT-40 TAPER, 20-POSITION ATC, HAAS CNC CONTROLS (NOTE: HAAS 4TH AXIS IS NOT INCLUDED)
1996 · HAAS · VF-4
 🔒 Subscribe
BARBEE ENGINEERING P300 SERIES BARBEE ENGINEERING P300 SERIES
BARBEE ENGINEERING P300 SERIES HYDRO PUMP TESTING SYSTEM
BARBEE ENGINEERING · P300 SERIES
 🔒 Subscribe
BULLARD 34 BULLARD 34
BULLARD 34 VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE - BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE, 34" DIAMETER TABLE, TABLE HEIGHT FROM FLOOR 33", CLEARANCE UNDER CROSS RAIL 24", VERTICAL TRAVEL OF TURRET 26", 5-POSITION TURRET, NEWALL C70 DIGITAL READ OUT, S/N 18975
BULLARD · 34
 🔒 Subscribe
HAAS 4TH AXIS ROTARY TABLE HAAS 4TH AXIS ROTARY TABLE
HAAS 4TH AXIS ROTARY TABLE WITH 8" DIAMETER FACE PLATE
HAAS · 4TH AXIS ROTARY TABLE
 🔒 Subscribe
BRIDGEPORT BRIDGEPORT
BRIDGEPORT SHAPING ATTACHMENT
BRIDGEPORT
 🔒 Subscribe
JET HP-15A JET HP-15A
JET HP-15A HYDRAULIC H-FRAME SHOP PRESS, 15-TON CAPACITY, 24-1/2" BETWEEN UPRIGHTS, ADJUSTABLE HEAD AND HEIGHT, S/N 1006037
JET · HP-15A
 🔒 Subscribe
BULLARD BULLARD
BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE, 34" DIAMETER TABLE, TABLE HEIGHT FROM FLOOR 33", CLEARANCE UNDER CROSS RAIL 24", VERTICAL TRAVEL OF TURRET 26", 5-POSITION TURRET, S/N 17181
BULLARD
 🔒 Subscribe
Equipment
VERTICAL KNEE MILL SHAPING ATTACHMENT
🔒 Subscribe
SUNNEN DIAL BORE GAGE SUNNEN DIAL BORE GAGE
SUNNEN DIAL BORE GAGE WITH CASE
SUNNEN · DIAL BORE GAGE
 🔒 Subscribe
ACER VMC-2040L ACER VMC-2040L
ACER VMC-2040L CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 40", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 20", T-SLOT TABLE 20" X 42", CAT-40 / BT-40 TAPER, 24-POSITION SIDE MOUNT ATC, ANILAM 6000M CNC CONTROLS
ACER · VMC-2040L
 🔒 Subscribe
MAXMILL YC-1 1/2VA MAXMILL YC-1 1/2VA
MAXMILL YC-1 1/2VA VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 9" X 42" T-SLOT TABLE, SPINDLE SPEEDS 80 TO 2720, LONGITUDINAL TRAVEL 30", SADDLE CROSS TRAVEL 12", VERTICAL KNEE TRAVEL 16"
MAXMILL · YC-1 1/2VA
 🔒 Subscribe
JET J-4200A-2 JET J-4200A-2
JET J-4200A-2 COMBINATION BELT AND DISC FINISHING MACHINE WITH 6" BELT AND 12" DIAMETER DISC
JET · J-4200A-2
 🔒 Subscribe
CLARK FC300-30S CLARK FC300-30S
CLARK FC300-30S FORK LIFT, ELECTIC 36V, 3000 LB CAPACITY, 2-STAGE MAST WITH 106" REACH, 70" TOP OF MAST WITH FORKS LOWERED, 24" LOAD CENTER, BATTERY CHARGER, SAFETY ROLL CAGE TO BE INSTALLED, LISTED HOURS AT TIME OF WRITE-UP 2395, S/N: F236-0003-2700-FA
CLARK · FC300-30S
 🔒 Subscribe
SERVICE DIAMOND ROCKWELL HARDNESS TESTER SERVICE DIAMOND ROCKWELL HARDNESS TESTER
SERVICE DIAMOND ROCKWELL HARDNESS TESTER
SERVICE DIAMOND · ROCKWELL HARDNESS TESTER
 🔒 Subscribe
VOLSTRO VOLSTRO
VOLSTRO RIGHT ANGLE AND MILLING HEAD ATTACHMENTS
VOLSTRO
 🔒 Subscribe
JEYMA P-1 JEYMA P-1
JEYMA P-1 UNIVERSAL PANTOGRAPH DIE-SINKING MACHINE, PANTOGRAPH AND SETTING BARS, CAM FORMING ATTACHMENT, T-SLOT TABLE 17-3/4" X 12-3/4", T-SLOT TABLE 14" X 9"
JEYMA · P-1
 🔒 Subscribe
BOYAR-SCHULTZ H612 BOYAR-SCHULTZ H612
BOYAR-SCHULTZ H612 SURFACE GRINDER WITH WALKER CERAMAX 6" X 12" MAGNETIC CHUCK
BOYAR-SCHULTZ · H612
 🔒 Subscribe
TORCUP TORCUP
TORCUP HYDRAULIC WRENCH PUMP
TORCUP
 🔒 Subscribe
D'ANDREA TRM63 D'ANDREA TRM63
CAT40 TAPER WITH D'ANDREA TRM63 BORING HEAD
D'ANDREA · TRM63
 🔒 Subscribe
Equipment
LARGE QTY OF THREAD AND PLUG GAGES INCLUDING STORAGE BOX
🔒 Subscribe
Equipment
8" DIAMETER, 4-JAW LATHE CHUCK
🔒 Subscribe
Equipment
WORK BENCH WITH CONTENTS OF VTL TOOLING INCLUDING BORING BARS AND ROTARY TABLE JAWS
🔒 Subscribe
Equipment
VARIOUS INTERNAL MICROMETERS
🔒 Subscribe
Equipment
SUPER INDEXING SPACER, HORIZONTAL/VERTICAL WITH 8" 3-JAW CHUCK
🔒 Subscribe
ULTRA-DEX ULTRA-DEX
ULTRA-DEX CHATTER FREE BORING BARS
ULTRA-DEX
 🔒 Subscribe
Equipment
LOT OF VARIOUS INSERTS
🔒 Subscribe
Equipment
LOT OF VARIOUS INSERTS
🔒 Subscribe
KURT PRECISION 6 KURT PRECISION 6
KURT PRECISION 6" MACHINE VISE
KURT · PRECISION 6
 🔒 Subscribe
KURT PRECISION 6 KURT PRECISION 6
KURT PRECISION 6" MACHINE VISE
KURT · PRECISION 6
 🔒 Subscribe
HAAS MANUAL TAIL STOCK HAAS MANUAL TAIL STOCK
HAAS MANUAL TAIL STOCK
HAAS · MANUAL TAIL STOCK
 🔒 Subscribe
BROWN & SHARPE BROWN & SHARPE
(3) BROWN & SHARPE INTERNAL MICROMETERS
BROWN & SHARPE
 🔒 Subscribe
Equipment
HEAVY DUTY ARBOR PRESS, RATCHET LEVERAGE WITH HANDWHEEL, STEEL RAM 2" X 2", 8-1/2" THROAT, SLOTTED TABLE PLATE
🔒 Subscribe
Equipment
LOT WITH CAT40 TAPERS AND BORING HEADS
🔒 Subscribe
DELTA DELTA
DELTA VERTICAL BAND SAW, BENCH TYPE, 13-1/2" THROAT, 14" X 14" TABLE
DELTA
 🔒 Subscribe
HARDINGE 10" DIAMETER COLLET CHUCK HARDINGE 10" DIAMETER COLLET CHUCK
HARDINGE 10" DIAMETER COLLET CHUCK
HARDINGE · 10" DIAMETER COLLET CHUCK
 🔒 Subscribe
MITUTOYO 12" TO 18" MICROMETER MITUTOYO 12" TO 18" MICROMETER
MITUTOYO 12" TO 18" MICROMETER WITH MICROMETER STANDARDS AND WOOD CASE
MITUTOYO · 12" TO 18" MICROMETER
 🔒 Subscribe
Equipment
VARIOUS SET-UP PLATES AND BLOCKS, (1) PLATE 12" X 16", (1) PLATE 12" X 12", (4) BLOCKS 6" X 4" X 2" AND (10) BLOCKS 3" X 2" X 1"
🔒 Subscribe
Equipment
8" DIAMETER, 3-JAW LATHE CHUCK WITH SPARE JAWS
🔒 Subscribe
Equipment
COLLET STAND WITH R8 COLLETS, TAPERS AND TOOLS
🔒 Subscribe
Equipment
VARIOUS DRILL BITS INCLUDING WOOD HOLDER
🔒 Subscribe
KENNEDY TWO-PIECE TOOL BOX KENNEDY TWO-PIECE TOOL BOX
KENNEDY TWO-PIECE TOOL BOX WITH CONTENTS
KENNEDY · TWO-PIECE TOOL BOX
 🔒 Subscribe
HUOT 3-DRAWER DISPENSER CABINET HUOT 3-DRAWER DISPENSER CABINET
HUOT 3-DRAWER DISPENSER CABINET WITH CONTENS
HUOT · 3-DRAWER DISPENSER CABINET
 🔒 Subscribe
Year Make Model Description Price
STANDARD MODERN 2060 STANDARD MODERN 2060 ENGINE LATHE, 22" DIAMETER SWING, 60" BETWEEN CENTERS, 12" DIAMETER SWING OVER CROSS-SLIDE, 20" DIAMETER SWING OVER SADDLE, 3" BAR CAPACITY, INCH AND METRIC THREADING, 18-SPINDLE SPEED RANGES FROM 27 TO 1600 RPM, CARRIAGE WITH CROSS SLIDE AND QUICK CHANGE TOOL POST WITH HOLDERS, TAILSTOCK, 3-JAW CHUCK, 4-JAW CHUCK, STEADY REST, LATHER CENTERS, JACOBS TAILSTOCK DRILL CHUCKS AND ANILAM WIZARD 211 DIGITAL READ OUT 🔒 Subscribe
2002 ACER DYNAMIC 1340G 2002 ACER DYNAMIC 1340G GAP BED LATHE, 13" SWING, 19" SWING OVER GAP, 40" BETWEEN CENTERS, 1-1/2" HOLE THROUGH SPINDLE, 8" SWING OVER CARRIAGE, TAIL STOCK, 8" DIAMETER 3-JAW CHUCK, NEWALL DP700 DIGITAL READ OUT 🔒 Subscribe
SHIGIYA SEIKI GPA-32100 SHIGIYA SEIKI GPA-32100 UNIVERSAL CYLINDRICAL GRINDER, SWING OVER TABLE 12-1/2", GRINDING DIAMETER 11", DISTANCE BETWEEN CENTERS 40", TABLE SWIVEL RANGE 10-DEGREES, WORKHEAD SWIVEL RANGE 120-DEGREES, LONGITUDINAL TABLE FEED .16 TO 10 FPM, WORKHEAD SPINDLE SPEED 20 TO 380 RPM, OVER WHEEL DRESSER, PAPER FILTRATION COOLANT, S/N 30032 🔒 Subscribe
2004 ACER DYNAMIC 2080GA 2004 ACER DYNAMIC 2080GA GAP BED LATHE, 20" SWING, 28" SWING OVER GAP, 80" BETWEEN CENTERS, 3" HOLE THROUGH SPINDLE, 12" SWING OVER CARRIAGE, STEADY REST, TAIL STOCK, 16" DIAMETER 4-JAW CHUCK, 12" DIAMETER 3-JAW CHUCK, NEWALL C80 DIGITAL READ OUT 🔒 Subscribe
SULLAIR SHOPTEK ST709 AC SULLAIR SHOPTEK ST709 AC SULL ROTARY SCREW AIR COMPRESSOR, HORIZONTAL TANK MOUNTED, 7.5KW, 125 PSIG, WITH SULLAIR SRS-50 REFRIGERATED AIR DRYER 🔒 Subscribe
HAAS HRT-310 HAAS HRT-310 4TH AXIS ROTARY TABLE WITH 12" DIAMETER FACE PLATE AND 10" DIAMETER 3-JAW CHUCK 🔒 Subscribe
STANDARD MODERN 1340 STANDARD MODERN 1340 ENGINE LATHE, 13" DIAMETER SWING, 40" BETWEEN CENTERS, 7-3/4" DIAMETER SWING OVER CROSS-SLIDE, 1-1/3" BAR CAPACITY, INCH AND METRIC THREADING, 12-SPINDLE SPEED RANGES FROM 40 TO 2000 RPM, CARRIAGE WITH CROSS SLIDE AND QUICK CHANGE TOOL POST WITH HOLDERS, TAILSTOCK, 3-JAW CHUCK, 4-JAW CHUCK, LATHER CENTERS AND JACOBS TAILSTOCK DRILL CHUCKS 🔒 Subscribe
ENCO X6320A ENCO X6320A VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 36" X 8" T-SLOT TABLE WITH WORKHORSE AL-235 POWER CROSS FEED, SPINDLE SPEEDS 100 TO 3500 RPM, PLATINUM PLUS DIGITAL READ OUT 🔒 Subscribe
1996 HAAS VF-4 1996 HAAS VF-4 CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 50", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 25", CAT-40 TAPER, 20-POSITION ATC, HAAS CNC CONTROLS (NOTE: HAAS 4TH AXIS IS NOT INCLUDED) 🔒 Subscribe
BARBEE ENGINEERING P300 SERIES BARBEE ENGINEERING P300 SERIES HYDRO PUMP TESTING SYSTEM 🔒 Subscribe
BULLARD 34 BULLARD 34 VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE - BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE, 34" DIAMETER TABLE, TABLE HEIGHT FROM FLOOR 33", CLEARANCE UNDER CROSS RAIL 24", VERTICAL TRAVEL OF TURRET 26", 5-POSITION TURRET, NEWALL C70 DIGITAL READ OUT, S/N 18975 🔒 Subscribe
HAAS 4TH AXIS ROTARY TABLE HAAS 4TH AXIS ROTARY TABLE WITH 8" DIAMETER FACE PLATE 🔒 Subscribe
BRIDGEPORT BRIDGEPORT SHAPING ATTACHMENT 🔒 Subscribe
JET HP-15A JET HP-15A HYDRAULIC H-FRAME SHOP PRESS, 15-TON CAPACITY, 24-1/2" BETWEEN UPRIGHTS, ADJUSTABLE HEAD AND HEIGHT, S/N 1006037 🔒 Subscribe
BULLARD BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE, 34" DIAMETER TABLE, TABLE HEIGHT FROM FLOOR 33", CLEARANCE UNDER CROSS RAIL 24", VERTICAL TRAVEL OF TURRET 26", 5-POSITION TURRET, S/N 17181 🔒 Subscribe
VERTICAL KNEE MILL SHAPING ATTACHMENT 🔒 Subscribe
SUNNEN DIAL BORE GAGE SUNNEN DIAL BORE GAGE WITH CASE 🔒 Subscribe
ACER VMC-2040L ACER VMC-2040L CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 40", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 20", T-SLOT TABLE 20" X 42", CAT-40 / BT-40 TAPER, 24-POSITION SIDE MOUNT ATC, ANILAM 6000M CNC CONTROLS 🔒 Subscribe
MAXMILL YC-1 1/2VA MAXMILL YC-1 1/2VA VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 9" X 42" T-SLOT TABLE, SPINDLE SPEEDS 80 TO 2720, LONGITUDINAL TRAVEL 30", SADDLE CROSS TRAVEL 12", VERTICAL KNEE TRAVEL 16" 🔒 Subscribe
JET J-4200A-2 JET J-4200A-2 COMBINATION BELT AND DISC FINISHING MACHINE WITH 6" BELT AND 12" DIAMETER DISC 🔒 Subscribe
CLARK FC300-30S CLARK FC300-30S FORK LIFT, ELECTIC 36V, 3000 LB CAPACITY, 2-STAGE MAST WITH 106" REACH, 70" TOP OF MAST WITH FORKS LOWERED, 24" LOAD CENTER, BATTERY CHARGER, SAFETY ROLL CAGE TO BE INSTALLED, LISTED HOURS AT TIME OF WRITE-UP 2395, S/N: F236-0003-2700-FA 🔒 Subscribe
SERVICE DIAMOND ROCKWELL HARDNESS TESTER SERVICE DIAMOND ROCKWELL HARDNESS TESTER 🔒 Subscribe
VOLSTRO VOLSTRO RIGHT ANGLE AND MILLING HEAD ATTACHMENTS 🔒 Subscribe
JEYMA P-1 JEYMA P-1 UNIVERSAL PANTOGRAPH DIE-SINKING MACHINE, PANTOGRAPH AND SETTING BARS, CAM FORMING ATTACHMENT, T-SLOT TABLE 17-3/4" X 12-3/4", T-SLOT TABLE 14" X 9" 🔒 Subscribe
BOYAR-SCHULTZ H612 BOYAR-SCHULTZ H612 SURFACE GRINDER WITH WALKER CERAMAX 6" X 12" MAGNETIC CHUCK 🔒 Subscribe
TORCUP TORCUP HYDRAULIC WRENCH PUMP 🔒 Subscribe
D'ANDREA TRM63 CAT40 TAPER WITH D'ANDREA TRM63 BORING HEAD 🔒 Subscribe
LARGE QTY OF THREAD AND PLUG GAGES INCLUDING STORAGE BOX 🔒 Subscribe
8" DIAMETER, 4-JAW LATHE CHUCK 🔒 Subscribe
WORK BENCH WITH CONTENTS OF VTL TOOLING INCLUDING BORING BARS AND ROTARY TABLE JAWS 🔒 Subscribe
VARIOUS INTERNAL MICROMETERS 🔒 Subscribe
SUPER INDEXING SPACER, HORIZONTAL/VERTICAL WITH 8" 3-JAW CHUCK 🔒 Subscribe
ULTRA-DEX ULTRA-DEX CHATTER FREE BORING BARS 🔒 Subscribe
LOT OF VARIOUS INSERTS 🔒 Subscribe
LOT OF VARIOUS INSERTS 🔒 Subscribe
KURT PRECISION 6 KURT PRECISION 6" MACHINE VISE 🔒 Subscribe
KURT PRECISION 6 KURT PRECISION 6" MACHINE VISE 🔒 Subscribe
HAAS MANUAL TAIL STOCK HAAS MANUAL TAIL STOCK 🔒 Subscribe
BROWN & SHARPE (3) BROWN & SHARPE INTERNAL MICROMETERS 🔒 Subscribe
HEAVY DUTY ARBOR PRESS, RATCHET LEVERAGE WITH HANDWHEEL, STEEL RAM 2" X 2", 8-1/2" THROAT, SLOTTED TABLE PLATE 🔒 Subscribe
LOT WITH CAT40 TAPERS AND BORING HEADS 🔒 Subscribe
DELTA DELTA VERTICAL BAND SAW, BENCH TYPE, 13-1/2" THROAT, 14" X 14" TABLE 🔒 Subscribe
HARDINGE 10" DIAMETER COLLET CHUCK HARDINGE 10" DIAMETER COLLET CHUCK 🔒 Subscribe
MITUTOYO 12" TO 18" MICROMETER MITUTOYO 12" TO 18" MICROMETER WITH MICROMETER STANDARDS AND WOOD CASE 🔒 Subscribe
VARIOUS SET-UP PLATES AND BLOCKS, (1) PLATE 12" X 16", (1) PLATE 12" X 12", (4) BLOCKS 6" X 4" X 2" AND (10) BLOCKS 3" X 2" X 1" 🔒 Subscribe
8" DIAMETER, 3-JAW LATHE CHUCK WITH SPARE JAWS 🔒 Subscribe
COLLET STAND WITH R8 COLLETS, TAPERS AND TOOLS 🔒 Subscribe
VARIOUS DRILL BITS INCLUDING WOOD HOLDER 🔒 Subscribe
KENNEDY TWO-PIECE TOOL BOX KENNEDY TWO-PIECE TOOL BOX WITH CONTENTS 🔒 Subscribe
HUOT 3-DRAWER DISPENSER CABINET HUOT 3-DRAWER DISPENSER CABINET WITH CONTENS 🔒 Subscribe
STANDARD MODERN 2060 photo
STANDARD MODERN 2060
METALWORKING & FABRICATION EQUIPMENT
STANDARD MODERN 2060 ENGINE LATHE, 22" DIAMETER SWING, 60" BETWEEN CENTERS, 12" DIAMETER SWING OVER ...
Hammer Price: 🔒
2002 ACER DYNAMIC 1340G photo
2002 ACER DYNAMIC 1340G
METALWORKING & FABRICATION EQUIPMENT
2002 ACER DYNAMIC 1340G GAP BED LATHE, 13" SWING, 19" SWING OVER GAP, 40" BETWEEN CENTERS, 1-1/2" HO...
Hammer Price: 🔒
SHIGIYA SEIKI GPA-32100 photo
SHIGIYA SEIKI GPA-32100
METALWORKING & FABRICATION EQUIPMENT
SHIGIYA SEIKI GPA-32100 UNIVERSAL CYLINDRICAL GRINDER, SWING OVER TABLE 12-1/2", GRINDING DIAMETER ...
Hammer Price: 🔒
2004 ACER DYNAMIC 2080GA photo
2004 ACER DYNAMIC 2080GA
METALWORKING & FABRICATION EQUIPMENT
2004 ACER DYNAMIC 2080GA GAP BED LATHE, 20" SWING, 28" SWING OVER GAP, 80" BETWEEN CENTERS, 3" HOLE ...
Hammer Price: 🔒
SULLAIR SHOPTEK ST709 AC photo
SULLAIR SHOPTEK ST709 AC
AIR COMPRESSORS
SULLAIR SHOPTEK ST709 AC SULL ROTARY SCREW AIR COMPRESSOR, HORIZONTAL TANK MOUNTED, 7.5KW, 125 PSIG,...
Hammer Price: 🔒
HAAS HRT-310 photo
HAAS HRT-310
CNC MACHINE CENTERS
HAAS HRT-310 4TH AXIS ROTARY TABLE WITH 12" DIAMETER FACE PLATE AND 10" DIAMETER 3-JAW CHUCK...
Hammer Price: 🔒
STANDARD MODERN 1340 photo
STANDARD MODERN 1340
METALWORKING & FABRICATION EQUIPMENT
STANDARD MODERN 1340 ENGINE LATHE, 13" DIAMETER SWING, 40" BETWEEN CENTERS, 7-3/4" DIAMETER SWING OV...
Hammer Price: 🔒
ENCO X6320A photo
ENCO X6320A
CNC MACHINE CENTERS
ENCO X6320A VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 36" X 8" T-SLOT TABLE WITH WORKHORSE AL-235 PO...
Hammer Price: 🔒
1996 HAAS VF-4 photo
1996 HAAS VF-4
CNC MACHINE CENTERS
1996 HAAS VF-4 CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 50", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 25...
Hammer Price: 🔒
BARBEE ENGINEERING P300 SERIES photo
BARBEE ENGINEERING P300 SERIES
TEST, MEASUREMENT & QUALITY EQUIPMENT
BARBEE ENGINEERING P300 SERIES HYDRO PUMP TESTING SYSTEM...
Hammer Price: 🔒
BULLARD 34 photo
BULLARD 34
METALWORKING & FABRICATION EQUIPMENT
BULLARD 34 VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE - BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TY...
Hammer Price: 🔒
HAAS 4TH AXIS ROTARY TABLE photo
HAAS 4TH AXIS ROTARY TABLE
CNC MACHINE CENTERS
HAAS 4TH AXIS ROTARY TABLE WITH 8" DIAMETER FACE PLATE...
Hammer Price: 🔒
BRIDGEPORT photo
BRIDGEPORT
METALWORKING & FABRICATION EQUIPMENT
BRIDGEPORT SHAPING ATTACHMENT...
Hammer Price: 🔒
JET HP-15A photo
JET HP-15A
PRESSES & FORMING
JET HP-15A HYDRAULIC H-FRAME SHOP PRESS, 15-TON CAPACITY, 24-1/2" BETWEEN UPRIGHTS, ADJUSTABLE HEAD ...
Hammer Price: 🔒
BULLARD photo
BULLARD
METALWORKING & FABRICATION EQUIPMENT
BULLARD VERTICAL TURRET LATHE, SPIRAL DRIVE TYPE, 34" DIAMETER TABLE, TABLE HEIGHT FROM FLOOR 33", C...
Hammer Price: 🔒
Equipment photo
METALWORKING & FABRICATION EQUIPMENT
VERTICAL KNEE MILL SHAPING ATTACHMENT...
Hammer Price: 🔒
SUNNEN DIAL BORE GAGE photo
SUNNEN DIAL BORE GAGE
TEST, MEASUREMENT & QUALITY EQUIPMENT
SUNNEN DIAL BORE GAGE WITH CASE...
Hammer Price: 🔒
ACER VMC-2040L photo
ACER VMC-2040L
CNC MACHINE CENTERS
ACER VMC-2040L CNC VERTICAL MACHINING CENTER, X-AXIS TRAVEL 40", Y-AXIS TRAVEL 20", Z-AXIS TRAVEL 20...
Hammer Price: 🔒
MAXMILL YC-1 1/2VA photo
MAXMILL YC-1 1/2VA
CNC MACHINE CENTERS
MAXMILL YC-1 1/2VA VERTICAL MILLING MACHINE, KNEE TYPE, 2HP, 9" X 42" T-SLOT TABLE, SPINDLE SPEEDS 8...
Hammer Price: 🔒
JET J-4200A-2 photo
JET J-4200A-2
SURFACE FINISHING EQUIPMENT
JET J-4200A-2 COMBINATION BELT AND DISC FINISHING MACHINE WITH 6" BELT AND 12" DIAMETER DISC...
Hammer Price: 🔒
CLARK FC300-30S photo
CLARK FC300-30S
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLARK FC300-30S FORK LIFT, ELECTIC 36V, 3000 LB CAPACITY, 2-STAGE MAST WITH 106" REACH, 70" TOP OF M...
Hammer Price: 🔒
SERVICE DIAMOND ROCKWELL HARDNESS TESTER photo
SERVICE DIAMOND ROCKWELL HARDNESS TESTER
TEST, MEASUREMENT & QUALITY EQUIPMENT
SERVICE DIAMOND ROCKWELL HARDNESS TESTER...
Hammer Price: 🔒
VOLSTRO photo
VOLSTRO
METALWORKING & FABRICATION EQUIPMENT
VOLSTRO RIGHT ANGLE AND MILLING HEAD ATTACHMENTS...
Hammer Price: 🔒
JEYMA P-1 photo
JEYMA P-1
METALWORKING & FABRICATION EQUIPMENT
JEYMA P-1 UNIVERSAL PANTOGRAPH DIE-SINKING MACHINE, PANTOGRAPH AND SETTING BARS, CAM FORMING ATTACHM...
Hammer Price: 🔒
BOYAR-SCHULTZ H612 photo
BOYAR-SCHULTZ H612
METALWORKING & FABRICATION EQUIPMENT
BOYAR-SCHULTZ H612 SURFACE GRINDER WITH WALKER CERAMAX 6" X 12" MAGNETIC CHUCK...
Hammer Price: 🔒
TORCUP photo
TORCUP
MISC
TORCUP HYDRAULIC WRENCH PUMP...
Hammer Price: 🔒
D'ANDREA TRM63 photo
D'ANDREA TRM63
METALWORKING & FABRICATION EQUIPMENT
CAT40 TAPER WITH D'ANDREA TRM63 BORING HEAD...
Hammer Price: 🔒
Equipment photo
TEST, MEASUREMENT & QUALITY EQUIPMENT
LARGE QTY OF THREAD AND PLUG GAGES INCLUDING STORAGE BOX...
Hammer Price: 🔒
Equipment photo
METALWORKING & FABRICATION EQUIPMENT
8" DIAMETER, 4-JAW LATHE CHUCK...
Hammer Price: 🔒
Equipment photo
MISC
WORK BENCH WITH CONTENTS OF VTL TOOLING INCLUDING BORING BARS AND ROTARY TABLE JAWS...
Hammer Price: 🔒
Equipment photo
TEST, MEASUREMENT & QUALITY EQUIPMENT
VARIOUS INTERNAL MICROMETERS...
Hammer Price: 🔒
Equipment photo
MISC
SUPER INDEXING SPACER, HORIZONTAL/VERTICAL WITH 8" 3-JAW CHUCK...
Hammer Price: 🔒
ULTRA-DEX photo
ULTRA-DEX
METALWORKING & FABRICATION EQUIPMENT
ULTRA-DEX CHATTER FREE BORING BARS...
Hammer Price: 🔒
Equipment photo
MISC
LOT OF VARIOUS INSERTS...
Hammer Price: 🔒
Equipment photo
MISC
LOT OF VARIOUS INSERTS...
Hammer Price: 🔒
KURT PRECISION 6 photo
KURT PRECISION 6
METALWORKING & FABRICATION EQUIPMENT
KURT PRECISION 6" MACHINE VISE...
Hammer Price: 🔒
KURT PRECISION 6 photo
KURT PRECISION 6
METALWORKING & FABRICATION EQUIPMENT
KURT PRECISION 6" MACHINE VISE...
Hammer Price: 🔒
HAAS MANUAL TAIL STOCK photo
HAAS MANUAL TAIL STOCK
CNC MACHINE CENTERS
HAAS MANUAL TAIL STOCK...
Hammer Price: 🔒
BROWN & SHARPE photo
BROWN & SHARPE
TEST, MEASUREMENT & QUALITY EQUIPMENT
(3) BROWN & SHARPE INTERNAL MICROMETERS...
Hammer Price: 🔒
Equipment photo
PRESSES & FORMING
HEAVY DUTY ARBOR PRESS, RATCHET LEVERAGE WITH HANDWHEEL, STEEL RAM 2" X 2", 8-1/2" THROAT, SLOTTED T...
Hammer Price: 🔒
Equipment photo
MISC
LOT WITH CAT40 TAPERS AND BORING HEADS...
Hammer Price: 🔒
DELTA photo
DELTA
WOODWORKING EQUIPMENT
DELTA VERTICAL BAND SAW, BENCH TYPE, 13-1/2" THROAT, 14" X 14" TABLE...
Hammer Price: 🔒
HARDINGE 10" DIAMETER COLLET CHUCK photo
HARDINGE 10" DIAMETER COLLET CHUCK
METALWORKING & FABRICATION EQUIPMENT
HARDINGE 10" DIAMETER COLLET CHUCK...
Hammer Price: 🔒
MITUTOYO 12" TO 18" MICROMETER photo
MITUTOYO 12" TO 18" MICROMETER
TEST, MEASUREMENT & QUALITY EQUIPMENT
MITUTOYO 12" TO 18" MICROMETER WITH MICROMETER STANDARDS AND WOOD CASE...
Hammer Price: 🔒
Equipment photo
MISC
VARIOUS SET-UP PLATES AND BLOCKS, (1) PLATE 12" X 16", (1) PLATE 12" X 12", (4) BLOCKS 6" X 4" X 2" ...
Hammer Price: 🔒
Equipment photo
METALWORKING & FABRICATION EQUIPMENT
8" DIAMETER, 3-JAW LATHE CHUCK WITH SPARE JAWS...
Hammer Price: 🔒
Equipment photo
MISC
COLLET STAND WITH R8 COLLETS, TAPERS AND TOOLS...
Hammer Price: 🔒
Equipment photo
POWER AND HAND TOOLS
VARIOUS DRILL BITS INCLUDING WOOD HOLDER...
Hammer Price: 🔒
KENNEDY TWO-PIECE TOOL BOX photo
KENNEDY TWO-PIECE TOOL BOX
MISC
KENNEDY TWO-PIECE TOOL BOX WITH CONTENTS...
Hammer Price: 🔒
HUOT 3-DRAWER DISPENSER CABINET photo
HUOT 3-DRAWER DISPENSER CABINET
MISC
HUOT 3-DRAWER DISPENSER CABINET WITH CONTENS...
Hammer Price: 🔒

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.