Fabrication Machining Equip Industrial Surplus

Harris Auctions

Category: TEST, MEASUREMENT & QUALITY EQUIPMENT

Total Lots: 56

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 56 lots

Year	Make	Model	Lot Description	Hammer Price
2015	ZEISS	CONTURA 7/10/6 RDS	2015 ZEISS CONTURA 7/10/6 RDS 5-AXIS CMM WITH VAST XXT PROBE, RDS ROTARY PROBE HEAD, VAST XXT SCANNING SENSOR, MSR MINI MULTI SENSOR RACK. TRAVELS: X-AXIS 27.5 INCH, Y-AXIS 39.4 INCH, Z-AXIS 23.6 INCH. 100-200 VAC, 50/60 HZ. S/N 201509530538 2015 · ZEISS · CONTURA 7/10/6 RDS	🔒 Subscribe
	SUNMASTER	CH-2690	26" X 90" SUNMASTER MODEL CH-2690 ENGINE LATHE, NEW - 26" X 90" SWING OVER BED: 26" SWING OVER CROSS SLIDE: 17.5" SWING IN GAP: 35.1" GAP WIDTH: 10.6" DISTANCE BETWEEN CENTERS: 90" BED WIDTH: 15.7" CENTER HEIGHT: 42" SPINDLE SPEEDS: (12) 13 - 1200 RPM SPINDLE MOTOR: 15 HP SPINDLE BORE: 4-1/16" SPINDLE TAPER AND CENTER: MT-7 / MT-5 SPINDLE NOSE: D1-11 FEED RANGES: 16 LONGITUDINAL FEEDS: 0.0012 - 0.039 CROSS FEEDS: 0.0004 - 0.0117 LEADSCREW DIAMETER / PITCH: 1.77" / 4INCH THREADS: (44) 2 - 72 TPI METRIC THREADS: (39) 0.2 - 14 MM COMPOUND TRAVEL: 9" CROSS SLIDE TRAVEL: 15.8" TAILSTOCK QUILL TRAVEL: 10" TAILSTOCK QUILL DIAMETER: 3.15" TAILSTOCK TAPER: MT-5 COOLANT PUMP MOTOR: 1/8 HP OAD (APPROXIMATE): 128" X 45" X 67" WEIGHT (APPROXIMATE): 7490 LBS. EQUIPPED WITH: TAPER TURNING ATTACHMENT - 10 DEG., 12" TRAVEL 12" 3-JAW CHUCK LONGITUDINAL RAPID TRAVERSE CARRIAGE MICRO STOP STANDARD EQUIPMENT: 12" BACK PLATE MT-7 TO MT-5 HEADSTOCK SPINDLE CENTER ADAPTOR CHUCK GUARD 4-WAY TOOL POST AUTOMATIC LONGITUDINAL FEED STOP BAR THREAD CHASING DIAL LED WORK LIGHT TWO-SPEED DRIVE TAILSTOCK SPINDLE FOOT BRAKE SYSTEM COOLANT SYSTEM WITH PUMP AND PIPING PULL DRAWER CHIP PAN FULL LENGTH SPLASH GUARD TOOL BOX WITH TOOLS S/N: 2692501074 SUNMASTER · CH-2690	🔒 Subscribe
	PECK-O-MATIC	814	PECK-O-MATIC BUCKING UNIT, MODEL 814. OD RANGE: 3 1/8 - 21 INCH. MIN. TORQUE: 5,000 FT-LB. MAX TORQUE: 100,000 FT-LB. MAX RPM - HIGH GEAR: 15 RPM. MAX RPM - LOW GEAR: 8RPM. PIPE SIZE RANGE (MAX OD): 4 1/2 - 20 INCH PIPE (21 INCH OD MAX). PECK-O-MATIC · 814	🔒 Subscribe
	ACCURSHEAR	862510	ACCURSHEAR HEAVY-DUTY 5/8" X 10' HYDRAULIC POWER SQUARING SHEAR MODEL 862510, CAPACITY 5/8" (0.625") MILD STEEL OVER 10 FT (120 INCHES) LENGTH, 50 HP MOTOR, 16 HYDRAULIC HOLD-DOWNS, 460V, BLADE SIZE: 1- X 5 X 124, HOLD DOWN TONNAGE: 32 TONS, FULL STROKE SPEED: 9 SPM, SHORT STROKE SPEED: 27 SPM, BACKGAUGE: 48, TABLE HEIGHT: 34, FULL TABLE SUPPORT DEPTH: 29 APPROX. MACHINE DIMS W/O SQUARING ARM: 153 LR X 120 FB APPROX. MACHINE DIMS W/ SQUARING ARM: 153 LR X 2047 FB X 112 H APPROX. MACHINE WEIGHT: 46,000 LBS ACCURSHEAR · 862510	🔒 Subscribe
	PECK-O-MATIC	637	PECK-O-MATIC BUCKING UNIT MODE: 637 OD RANGE: 1-15/16 - 75/8 IN. MINIMUM TORQUE: 300 FT.-LB MAXIMUM TORQUE: 11,000 FT-LB. MAXIMUM RPM - HIGH GEAR: 166 RPM MINIMUM RPM - LOW RANGE: 13 RPM PIPE SIZE RANGE: 1-5/16 - 6-5/8 IN. S/N: 634-1740 PECK-O-MATIC · 637	🔒 Subscribe
2011	VENTIL	HC1000	2011 VENTIL HORIZONTAL VALVE TEST UNIT, 2-36 CAPACITY, MODEL HC1000. SEMI-AUTOMATIC TEST UNIT FOR PRESSURE TESTING ALL LINEAR TYPES OF GATE, GLOVE, BALL AND CHECK VALVES IN THE RANGE 2-36 ACCORDING TO INTERNATIONAL TEST STANDARDS. HC1000 CLAMPING SYSTEM WITH HEAVY CONSTRUCTION FOR EASY POSITIONING AND CLAMPING THE VALVE IN HORIZONTAL POSITION (VALVE STEM VERTICAL). DESIGNED FOR A MAXIMUM CLAMPING FORCE OF 1000 TON, AUTOMATICALLY ADJUSTED FOR VALVE SIZE TO PREVENT STRESS OR DEFORMATION. INCLUDES PROVISION FOR SOFT PRE-CLAMPING. SUITABLE FOR GAS & LIQUID TESTING. CONTROL PANEL MANUFACTURED FROM STAINLESS STEEL FOR OPERATING CLAMPING SYSTEM AND CONTROLLING TEST SYSTEM. GAS TEST SYSTEM: 0-100 PSI / 7 BAR (COMPRESSED AIR). LIQUID TEST SYSTEM: 0-689 BAR / 10,000 PSI (MIX OF WATER & INHIBITOR). 2011 · VENTIL · HC1000	🔒 Subscribe
2011	TAKUMI	V-20	2011 TAKUMI V-20 VERTICAL MACHINING CENTER, S/N N0286, CONTROLLER: FANUC 0I-MD, TRAVEL: 70.87 (1800 MM)Y-AXIS TRAVEL: 35.4 (900 MM)Z-AXIS TRAVEL: 29.52 (750 MM)TABLE SIZE: 78.7 X 31.49, TABLE LOAD CAPACITY: 4,850 LBS (APPROX. 2,200 KG) SPINDLE SPEED: 6,000 RPM, MAIN MOTOR30 HP, TOOL CHANGER: 32 AUTOMATIC TOOL CHANGER (ATC), SPINDLE TAPER: CAT 50, HIGH PRESSURE COOLANT THROUGH SPINDLE, OIL CHILLER, CHIP CONVEYOR. 2011 · TAKUMI · V-20	🔒 Subscribe
2025	SUNMASTER	CH-2260	2025 SUNMASTER CH-2260 MANUAL LATHE, 22 INCH X 60 INCH, SWING OVER BED: 22 INCH, SWING OVER CROSS SLIDE: 13.3 INCH, SWING IN GAP: 31.3 INCH, GAP WIDTH: 10.6 INCH, DISTANCE BETWEEN CENTERS: 60 INCH, BED WIDTH: 15.7 INCH, CENTER HEIGHT: 42 INCH, SPINDLE SPEEDS: (12) 13 - 1200 RPM, SPINDLE MOTOR: 15 HP, SPINDLE BORE: 4-1/16 INCH, SPINDLE TAPER AND CENTER: MT-7 / MT-5, SPINDLE NOSE: D1-11, FEED RANGES: 16, LONGITUDINAL FEEDS: 0.0012 - 0.039, CROSS FEEDS: 0.0004 - 0.0117, LEADSCREW DIAMETER / PITCH: 1.77 INCH / 4 INCH, THREADS: (44) 2 - 72 TPI, METRIC THREADS: (39) 0.2 - 14 MM, COMPOUND TRAVEL: 9 INCH, CROSS SLIDE TRAVEL: 15.8 INCH, TAILSTOCK QUILL TRAVEL: 10 INCH, TAILSTOCK QUILL DIAMETER: 3.15 INCH, TAILSTOCK TAPER: MT-5, COOLANT PUMP MOTOR: 1/8 HP, OAD (APPROXIMATE): 128 INCH X 45 INCH X 67 INCH, WEIGHT (APPROXIMATE): 7490 LBS. EQUIPPED WITH: TAPER TURNING ATTACHMENT - 10 DEG., 12 INCH TRAVEL, 12 INCH 3-JAW CHUCK, LONGITUDINAL RAPID TRAVERSE, CARRIAGE MICRO STOP. STANDARD EQUIPMENT: 12 INCH BACK PLATE, MT-7 TO MT-5 HEADSTOCK SPINDLE CENTER ADAPTOR, CHUCK GUARD, 4-WAY TOOL POST, AUTOMATIC LONGITUDINAL FEED STOP BAR, THREAD CHASING DIAL, LED WORK LIGHT, TWO-SPEED DRIVE, TAILSTOCK SPINDLE FOOT BRAKE SYSTEM, COOLANT SYSTEM WITH PUMP AND PIPING, PULL DRAWER CHIP PAN, FULL LENGTH SPLASH GUARD, TOOL BOX WITH TOOLS. S/N 2262501077 2025 · SUNMASTER · CH-2260	🔒 Subscribe
	NATIONAL	650 T	NATIONAL 650 T SWAGE PRESS, 650-TON CAPACITY. IDEAL FOR VARIOUS INDUSTRIAL APPLICATIONS, IT REPRESENTS RELIABLE ENGINEERING FROM A TRUSTED MANUFACTURER. NATIONAL · 650 T	🔒 Subscribe
2015	TAKUMI	V11	2015 TAKUMI VERTICAL MACHINING CENTER MODEL V11, TRAVELS (X/Y/Z): 43.31" X 26" X 24.01", TABLE SIZE: 45.28" X 25.59" SPINDLE: GEARED, 6,000 RPM, CAT 50. SPINDLE POWER: 25 HP, ATC: 24-TOOL SWING-ARM, MAX TABLE LOAD: 2,425 LBS (1,100 KG). MACHINE WEIGHT: 17,500 LBS, S/N G13015 2015 · TAKUMI · V11	🔒 Subscribe
	SHARP	KMA-2	SHARP KMA-2 MANUAL MILL 17" X 74" TABLE, 47" X TRAVEL, 17" Y TRAVEL, 1500 RPM, NMTB50 TAPER SPINDLE. VERTICAL HEAD TRAVEL: 21". SPINDLE NOSE TO TABLE: 4" - 25". SPINDLE CENTER TO COLUMN: 17". VERTICAL HOUSING FEEDS: .0025 - .01 IN. PER REVOLUTION. TABLE FEEDS: 1 3/16 - 37 INCHES PER MINUTE. PENDANT CONTROLS, 3 AXIS NEWALL DRO, RAPID TRAVERSE, AUTO LUBRICATION, WORK LIGHT, LEVELING PADS, POWER DRAW BAR S/N: SHARP · KMA-2	🔒 Subscribe
	CINCINNATI	90AF- 8FT	8' X 90 TON CINCINNATI AUTOFORM HYDRAULIC PRESS BRAKE, MODEL 90AF- 8FT, TONNAGE: 90, OVERALL DIE SURFACE: 10', DISTANCE BETWEEN HOUSINGS: 8' 6", BED TOP ABVOE FLOOR: 34", STROKE: 14", CLOSED HEIGHT: 12", BED CROWN: .001, RAM TILT LIMIT: 1", CNC CONTROL: YES, TYPE OF CNC CONTROL: CINCINNATI, WEIGHT: 19000 POUNDS CINCINNATI · 90AF- 8FT	🔒 Subscribe
	HAAS	VF-4	HAAS VF-4 CNC VERTICAL MACHINING CENTER, VMC 18 X 52 INCH TABLE, 50 INCH X TRAVEL, 20 INCH Y TRAVEL, 25 INCH Z TRAVEL, 24 SIDE MOUNT ATC, 7500 RPM, 40 TAPER, 4TH AXIS UNIT. SPINDLE HAS INTERMITTENT NOISE - SEE VIDEO. S/N: 1060084 HAAS · VF-4	🔒 Subscribe
	MANFORD	L-SP-500VS	NEW - UNUSED, MANFORD MODEL L-SP-500VS VERTICAL TURRET MILLING MACHINE, TABLE SIZE: 10" X 54" T-SLOTS: (3) 0.629" TABLE LONGITUDINAL TRAVEL: 34" TABLE CROSS TRAVEL: 16" KNEE VERTICAL TRAVEL: 17" RAM TRAVEL: 22"QUILL TRAVEL: 5" SPINDLE NOSE TO TABLE: 3.3" - 21" TURRET SWIVEL: 360 DEG. HEAD SWIVEL (L-R): +/- 45 DEG. HEAD TILT (UP-DOWN): +/- 45 DEG. SPINDLE TO COLUMN: 6.6" - 28.7" SPINDLE SPEEDS: 60 - 4500 RPM SPINDLE MOTOR: 3 HP SPINDLE TAPER: R8 QUILL FEEDS: (3) 0.0015, 0.003, 0.006 IPROAD: 72.4" X 83.5" X 90" HIGH WEIGHT (APPROXIMATE): 3360 LBS. MANFORD · L-SP-500VS	🔒 Subscribe
2013	DOALL	3612-VH	2013 DOALL 3612-VH VERTICAL CONTOUR SAW, POWERED BY A 3 HP MOTOR. FEATURES INCLUDE AUTOMATIC OPERATION, BLADE SPEEDS OF 550-5500 FPM, AND A BAND WIDTH CAPACITY OF 1/8" TO 1". DIMENSIONS: 56" X 44" X 80", WEIGHT 1900 LBS. 2013 · DOALL · 3612-VH	🔒 Subscribe
	MANFORD	L-2V	NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD. S/N A25019-01 MANFORD · L-2V	🔒 Subscribe
	MANFORD	L-2V	NEW, MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS), 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD, S/N A25019-03 MANFORD · L-2V	🔒 Subscribe
	MANFORD	L-2V	NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD. S/N A25019-02 MANFORD · L-2V	🔒 Subscribe
	LEHMANN HYDRATROL	OIL FIELD & HOLLOW SPINDLE LATHE	LEHMANN HYDRATROL OIL FIELD & HOLLOW SPINDLE LATHE, WITH 16 INCH HOLE. SWING OVER BED: 32 INCH. SWING OVER CROSS SLIDE: 22.5 INCH. TOTAL BED LENGTH: 168 INCH. DISTANCE BETWEEN SPINDLE NOSE AND TURRET OR OPTIONAL TAILSTOCK: 135 INCH. BED WIDTH: 27.5 INCH. SPINDLE SPEEDS: (12) 5 - 150 RPM. SPINDLE MOTOR: 40 HP. SPINDLE BORE: 16.5 INCH. SPINDLE MOUNT: CYLINDRICAL. INCH THREADING: 5/8 - 72 TPI. FEEDRATES: 0.0055 - 0.64 IPR. LEADSCREW DIAMETER: 2.125 INCH. ELECTRICS: 460V / 3 PH. S/N C-249 LEHMANN HYDRATROL · OIL FIELD & HOLLOW SPINDLE LATHE	🔒 Subscribe
	MAZAK	VTC-200C	2000 MAZAK VTC-200C CNC VERTICAL MACHINING CENTER, 20" X 77" TABLE, 65" X TRAVEL, 20" Y TRAVEL, 20" Z TRAVEL, 10K SPINDLE, CAT 40, 24 ATC, MAZATROL 640M CONTROL MAZAK · VTC-200C	🔒 Subscribe
	CINCINNATI GILBERT		4' 11" CINCINNATI GILBERT RADIAL ARM DRILL, S/N 3B6254 CINCINNATI GILBERT	🔒 Subscribe
2007	KUHLMEYER	ZBS	2007 KUHLMEYER ZBS TWIN-BELT SANDING AND GRINDING FINISHING MACHINE, S/N 0705221, 480V, 6 KW, ADJUSTABLE TABLE HEIGHT, TWO SANDING BELTS, VARIABLE SPEED, DUST COLLECTION SYSTEM, 2,500 KG GROSS WEIGHT 2007 · KUHLMEYER · ZBS	🔒 Subscribe
	USI CLEARING	S2-500-84-48	2000 USI CLEARING S2-500-84-48 STRAIGHT SIDE DOUBLE CRANK PRESS, 500 TONNAGE, 12 INCH STROKE, 42 INCH SHUT HEIGHT, 10 INCH ADJUSTMENT, BED SIZE 84 INCH X 48 INCH, 20 - 40 STROKES PER MIN. AIR CLUTCH, S/N 10-4335 USI CLEARING · S2-500-84-48	🔒 Subscribe
	TOSHIBA SHIBAURA	BTD200-QE	2000 TOSHIBA SHIBAURA BTD200-QE CNC HORIZONTAL BORING MILL, HBM - TOSHIBA SHIBAURA MODEL BTD-200QE, CNC HBM, BORING MILL, 8 INCH EXTENDABLE QUILL, 39 INCH X 39 INCH TABLE, TOSNUC CNC, AUGER/CONVEYOR TOSHIBA SHIBAURA · BTD200-QE	🔒 Subscribe
	EVERETT	20-22	2022 EVERETT CUT OFF SAW 20-22, 2320 RPM ENCLOSURE AIR CLAMP, S/N 02-10002 EVERETT · 20-22	🔒 Subscribe
			96 X 60 X 30 1/2 HEAVY DUTY SHOP TABLE WITH 6 1/2 VISE, 1 1/2 SOLID TOP	🔒 Subscribe
	CRAM-A-LOT	VB-42-B	CRAM-A-LOT VB-42-B, USED. FEATURES 30"X42"X48" BALE SIZE, KEY-OPERATED CONTROLS, QUIET VANE PUMP, SIDE-MOUNTED POWER UNIT, USA-MADE. ANSI Z245.5 COMPLIANT WITH SAFETY LOCK AND PATENTED EJECT SYSTEM. IDEAL FOR EFFICIENT BALING NEEDS. CRAM-A-LOT · VB-42-B	🔒 Subscribe
	METTLER-TOLEDO	DRUM FILLER	METTLER-TOLEDO DRUM FILLER DRUM AND BARREL HANDLING, METTLER TOLEDO DRUM FILLER SEMI-AUTOMATIC SINGLE CONTAINER SUB-SURFACE FILLER (NOTE: METAL 55 GALLON DRUM ONLY) METTLER-TOLEDO · DRUM FILLER	🔒 Subscribe
	CINCINNATI	BRICKFORD RADIAL ARM DRILL	CINCINNATI BRICKFORD RADIAL ARM DRILL WITH BOX TABLE, 5/32" TO 2 1/8" DRILLING CAPACITY, LARGE HOLE CAPACITY 3/4" TO 9", GEAR DRIVEN SPINDLE, MT5 SPINDLE TAPER, MECHANICAL POWER DOWN FEEDS, VARIABLE SPEEDS, 775 RPM ARM SHAFT SPEED, 480V, 3 PH. CINCINNATI · BRICKFORD RADIAL ARM DRILL	🔒 Subscribe
2012	DALMEC	PROCESS PIPE CELL (PPC)	2012 DALMEC PROCESS PIPE CELL (PPC) MANIPULATOR, A COMPACT AND PORTABLE MANIPULATOR WITH PROGRAMMABLE OSCILLATION DESIGNED TO REVOLUTIONIZE PIPE WELDING PRODUCTIVITY. VERSATILE AND COMPATIBLE WITH VARIOUS WELDING POWER SOURCES AND WIRE FEEDERS, INCLUDING MILLER PIPEWORX AND LINCOLN POWER WAVE SYSTEMS, PPC ALLOWS FOR EFFICIENT ROOT PASSES USING ADVANCED RMD OR STT TECHNOLOGY. ADDITIONALLY, IT OFFERS PRECISION DURING HOT AND CAP PASSES, WITH A CHOICE OF SOLID, FLUX-CORE, OR METAL-CORE WIRE, ALL CONTROLLED BY A PROGRAMMABLE WELDING OSCILLATOR. 2012 · DALMEC · PROCESS PIPE CELL (PPC)	🔒 Subscribe
	STRIPPIT	CUSTOM 18/30	STRIPPIT CUSTOM 18/30 TURRET PUNCH PRESS WITH TOOLING STRIPPIT · CUSTOM 18/30	🔒 Subscribe
			PALLET RACKING 2 SECTIONS, 9 LONG X 4 W X 12 TALL WITH METAL CROSS SLATS SUPPORT, (3) DOUBLE SIDED UPRIGHTS (16) CROSS ARMS	🔒 Subscribe
2000	MITSUBISHI ELECTRIC	EA22	2000 MITSUBISHI ELECTRIC EA22 SINKER EDM, TABLE SIZE-W: 21 INCHES TABLE SIZE-L: 29 INCHES X-AXIS TRAVEL: 19.69 INCHES Y-AXIS TRAVEL: 15.75 INCHES Z-AXIS TRAVEL: 13.78 INCHES CNC CONTROL: YES TYPE OF CNC CONTROL: MITSUBISHI FP60EA - FUZZY PRO3 - ORBIT PRO MAX WORK PIECE DIMENSIONS: 35.43 X 23.62 X 11.81 INCHES MAX WORK PIECE WEIGHT: 2200 POUNDS INNER TANK DIMENSIONS: 37 X 25 X 15 INCHES MAX ELECTRODE WEIGHT: 220 POUNDS NEW HIGH SPEED JUMP COIN & PALLET STYLE HOLDERS MISCELLANEOUS ELECTRODES 2000 · MITSUBISHI ELECTRIC · EA22	🔒 Subscribe
			96 X 48 X 35 HEAVY DUTY SHOP TABLE WITH 3/4 SOLID THICK TOP	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT ROHM	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT ROHM	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT ROHM	🔒 Subscribe
	DAYTON ELECTRIC	5Z362A	DAYTON ELECTRIC 120 GALLON AIR COMPRESSOR, MODEL 5Z362A, 200 MAX PSI, CENTURY 10 HP MOTOR, 220/440 V, S/N L8/5/2014-00007 DAYTON ELECTRIC · 5Z362A	🔒 Subscribe
	ALMCO		ALMCO VIBRATING DEBURR MACHINE. THIS USED VIBRATORY MACHINE IS IDEAL FOR QUICK & EFFICIENT DEBURRING TASKS. SUITABLE FOR DIVERSE INDUSTRIAL APPLICATIONS. ALMCO	🔒 Subscribe
1989	KAESER	SM 11	1989 KAESER SM 11 ROTARY SCREW & SLIDING VANE AIR COMPRESSOR, 10 HP 230/460/3/60 36 CFM 145 PSIG 1989 · KAESER · SM 11	🔒 Subscribe
			CRATE OF TWIST DRILLS AND MISC	🔒 Subscribe
	WELDING ENGINEERING	HPFR-HAMZ150-300 HLS / MM-3000X	LARGE LOT OF (13) WELDING ENGINEERING EQUIPMENT: FLUX SEPARATORS, HOPPERS, VACUUM SYSTEMS AND MORE. (6) VACCUMS (4) HOPPERS (3) NEW AND OLD FEED SEPARATOR. TYPES: WELDING ENGINEERING XL NEW AND OLD FLUX FEED SEPARATOR SYSTEMS, WELDING ENGINEERING HOPPER HIGH LOW SENSOR SYSTEM, MODEL HPFR-HAMZ150-300 HLS, WELDING ENGINEERING THE MIGHTY-MAC X, EXTREME VACUUM SYTEM FOR TOUGH, HEAVY DUTY FLUX RECOVERY MODEL MM-3000X, S/N 119472, 460V, 3 PH, 60 HZ WELDING ENGINEERING · HPFR-HAMZ150-300 HLS / MM-3000X	🔒 Subscribe
			CUSTOM BUILT HYDRAULIC SHOP PRESS ON CASTERS 39 X 26 X 37	🔒 Subscribe
			LOT OF 3: HD PIPE/ BAR ADJUSTABLE HOLDERS ON CASTERS	🔒 Subscribe
	SIOUX	180-C	SIOUX HOT POT WASHER MODEL 180-C, PH 1, 60 HZ, 90/180 GPH, 100/500 PSI S/N 0010002 SIOUX · 180-C	🔒 Subscribe
2017	EDGE TECHNOLOGIES	REBEL 80 SERVO V3	2017 EDGE TECHNOLOGIES REBEL 80 SERVO V3 MAGAZINE BAR LOADER, MODEL REBEL80GENII. MIN. DIAMETER (ROUND): .315 TO 3.150 INCHES, MAXIMUM BAR STOCK LENGTH: 60 INCHES, S/N T4201707002 2017 · EDGE TECHNOLOGIES · REBEL 80 SERVO V3	🔒 Subscribe
	DIGIWEIGH	DWP-102E	48 X 48 DIGIWEIGH DIGITAL SCALE MODEL DWP-102E DIGIWEIGH · DWP-102E	🔒 Subscribe
			CRATE OF ASSORTED 60 TAPER TOOLING FOR GIDDINGS & LEWIS G & L VERTICAL BORING MILL VTL	🔒 Subscribe
	MATHEY DEARMAN	711 SERIES	MATHEY DEARMAN STANDARD & MEGA RIM CLAMP, DEARMAN 711 SERIES, S/N 78180 MATHEY DEARMAN · 711 SERIES	🔒 Subscribe
			30 INCH ID STEADY REST	🔒 Subscribe

Year	Make	Model	Description	Price
2015	ZEISS	CONTURA 7/10/6 RDS	2015 ZEISS CONTURA 7/10/6 RDS 5-AXIS CMM WITH VAST XXT PROBE, RDS ROTARY PROBE HEAD, VAST XXT SCANNING SENSOR, MSR MINI MULTI SENSOR RACK. TRAVELS: X-AXIS 27.5 INCH, Y-AXIS 39.4 INCH, Z-AXIS 23.6 INCH. 100-200 VAC, 50/60 HZ. S/N 201509530538	🔒 Subscribe
	SUNMASTER	CH-2690	26" X 90" SUNMASTER MODEL CH-2690 ENGINE LATHE, NEW - 26" X 90" SWING OVER BED: 26" SWING OVER CROSS SLIDE: 17.5" SWING IN GAP: 35.1" GAP WIDTH: 10.6" DISTANCE BETWEEN CENTERS: 90" BED WIDTH: 15.7" CENTER HEIGHT: 42" SPINDLE SPEEDS: (12) 13 - 1200 RPM SPINDLE MOTOR: 15 HP SPINDLE BORE: 4-1/16" SPINDLE TAPER AND CENTER: MT-7 / MT-5 SPINDLE NOSE: D1-11 FEED RANGES: 16 LONGITUDINAL FEEDS: 0.0012 - 0.039 CROSS FEEDS: 0.0004 - 0.0117 LEADSCREW DIAMETER / PITCH: 1.77" / 4INCH THREADS: (44) 2 - 72 TPI METRIC THREADS: (39) 0.2 - 14 MM COMPOUND TRAVEL: 9" CROSS SLIDE TRAVEL: 15.8" TAILSTOCK QUILL TRAVEL: 10" TAILSTOCK QUILL DIAMETER: 3.15" TAILSTOCK TAPER: MT-5 COOLANT PUMP MOTOR: 1/8 HP OAD (APPROXIMATE): 128" X 45" X 67" WEIGHT (APPROXIMATE): 7490 LBS. EQUIPPED WITH: TAPER TURNING ATTACHMENT - 10 DEG., 12" TRAVEL 12" 3-JAW CHUCK LONGITUDINAL RAPID TRAVERSE CARRIAGE MICRO STOP STANDARD EQUIPMENT: 12" BACK PLATE MT-7 TO MT-5 HEADSTOCK SPINDLE CENTER ADAPTOR CHUCK GUARD 4-WAY TOOL POST AUTOMATIC LONGITUDINAL FEED STOP BAR THREAD CHASING DIAL LED WORK LIGHT TWO-SPEED DRIVE TAILSTOCK SPINDLE FOOT BRAKE SYSTEM COOLANT SYSTEM WITH PUMP AND PIPING PULL DRAWER CHIP PAN FULL LENGTH SPLASH GUARD TOOL BOX WITH TOOLS S/N: 2692501074	🔒 Subscribe
	PECK-O-MATIC	814	PECK-O-MATIC BUCKING UNIT, MODEL 814. OD RANGE: 3 1/8 - 21 INCH. MIN. TORQUE: 5,000 FT-LB. MAX TORQUE: 100,000 FT-LB. MAX RPM - HIGH GEAR: 15 RPM. MAX RPM - LOW GEAR: 8RPM. PIPE SIZE RANGE (MAX OD): 4 1/2 - 20 INCH PIPE (21 INCH OD MAX).	🔒 Subscribe
	ACCURSHEAR	862510	ACCURSHEAR HEAVY-DUTY 5/8" X 10' HYDRAULIC POWER SQUARING SHEAR MODEL 862510, CAPACITY 5/8" (0.625") MILD STEEL OVER 10 FT (120 INCHES) LENGTH, 50 HP MOTOR, 16 HYDRAULIC HOLD-DOWNS, 460V, BLADE SIZE: 1- X 5 X 124, HOLD DOWN TONNAGE: 32 TONS, FULL STROKE SPEED: 9 SPM, SHORT STROKE SPEED: 27 SPM, BACKGAUGE: 48, TABLE HEIGHT: 34, FULL TABLE SUPPORT DEPTH: 29 APPROX. MACHINE DIMS W/O SQUARING ARM: 153 LR X 120 FB APPROX. MACHINE DIMS W/ SQUARING ARM: 153 LR X 2047 FB X 112 H APPROX. MACHINE WEIGHT: 46,000 LBS	🔒 Subscribe
	PECK-O-MATIC	637	PECK-O-MATIC BUCKING UNIT MODE: 637 OD RANGE: 1-15/16 - 75/8 IN. MINIMUM TORQUE: 300 FT.-LB MAXIMUM TORQUE: 11,000 FT-LB. MAXIMUM RPM - HIGH GEAR: 166 RPM MINIMUM RPM - LOW RANGE: 13 RPM PIPE SIZE RANGE: 1-5/16 - 6-5/8 IN. S/N: 634-1740	🔒 Subscribe
2011	VENTIL	HC1000	2011 VENTIL HORIZONTAL VALVE TEST UNIT, 2-36 CAPACITY, MODEL HC1000. SEMI-AUTOMATIC TEST UNIT FOR PRESSURE TESTING ALL LINEAR TYPES OF GATE, GLOVE, BALL AND CHECK VALVES IN THE RANGE 2-36 ACCORDING TO INTERNATIONAL TEST STANDARDS. HC1000 CLAMPING SYSTEM WITH HEAVY CONSTRUCTION FOR EASY POSITIONING AND CLAMPING THE VALVE IN HORIZONTAL POSITION (VALVE STEM VERTICAL). DESIGNED FOR A MAXIMUM CLAMPING FORCE OF 1000 TON, AUTOMATICALLY ADJUSTED FOR VALVE SIZE TO PREVENT STRESS OR DEFORMATION. INCLUDES PROVISION FOR SOFT PRE-CLAMPING. SUITABLE FOR GAS & LIQUID TESTING. CONTROL PANEL MANUFACTURED FROM STAINLESS STEEL FOR OPERATING CLAMPING SYSTEM AND CONTROLLING TEST SYSTEM. GAS TEST SYSTEM: 0-100 PSI / 7 BAR (COMPRESSED AIR). LIQUID TEST SYSTEM: 0-689 BAR / 10,000 PSI (MIX OF WATER & INHIBITOR).	🔒 Subscribe
2011	TAKUMI	V-20	2011 TAKUMI V-20 VERTICAL MACHINING CENTER, S/N N0286, CONTROLLER: FANUC 0I-MD, TRAVEL: 70.87 (1800 MM)Y-AXIS TRAVEL: 35.4 (900 MM)Z-AXIS TRAVEL: 29.52 (750 MM)TABLE SIZE: 78.7 X 31.49, TABLE LOAD CAPACITY: 4,850 LBS (APPROX. 2,200 KG) SPINDLE SPEED: 6,000 RPM, MAIN MOTOR30 HP, TOOL CHANGER: 32 AUTOMATIC TOOL CHANGER (ATC), SPINDLE TAPER: CAT 50, HIGH PRESSURE COOLANT THROUGH SPINDLE, OIL CHILLER, CHIP CONVEYOR.	🔒 Subscribe
2025	SUNMASTER	CH-2260	2025 SUNMASTER CH-2260 MANUAL LATHE, 22 INCH X 60 INCH, SWING OVER BED: 22 INCH, SWING OVER CROSS SLIDE: 13.3 INCH, SWING IN GAP: 31.3 INCH, GAP WIDTH: 10.6 INCH, DISTANCE BETWEEN CENTERS: 60 INCH, BED WIDTH: 15.7 INCH, CENTER HEIGHT: 42 INCH, SPINDLE SPEEDS: (12) 13 - 1200 RPM, SPINDLE MOTOR: 15 HP, SPINDLE BORE: 4-1/16 INCH, SPINDLE TAPER AND CENTER: MT-7 / MT-5, SPINDLE NOSE: D1-11, FEED RANGES: 16, LONGITUDINAL FEEDS: 0.0012 - 0.039, CROSS FEEDS: 0.0004 - 0.0117, LEADSCREW DIAMETER / PITCH: 1.77 INCH / 4 INCH, THREADS: (44) 2 - 72 TPI, METRIC THREADS: (39) 0.2 - 14 MM, COMPOUND TRAVEL: 9 INCH, CROSS SLIDE TRAVEL: 15.8 INCH, TAILSTOCK QUILL TRAVEL: 10 INCH, TAILSTOCK QUILL DIAMETER: 3.15 INCH, TAILSTOCK TAPER: MT-5, COOLANT PUMP MOTOR: 1/8 HP, OAD (APPROXIMATE): 128 INCH X 45 INCH X 67 INCH, WEIGHT (APPROXIMATE): 7490 LBS. EQUIPPED WITH: TAPER TURNING ATTACHMENT - 10 DEG., 12 INCH TRAVEL, 12 INCH 3-JAW CHUCK, LONGITUDINAL RAPID TRAVERSE, CARRIAGE MICRO STOP. STANDARD EQUIPMENT: 12 INCH BACK PLATE, MT-7 TO MT-5 HEADSTOCK SPINDLE CENTER ADAPTOR, CHUCK GUARD, 4-WAY TOOL POST, AUTOMATIC LONGITUDINAL FEED STOP BAR, THREAD CHASING DIAL, LED WORK LIGHT, TWO-SPEED DRIVE, TAILSTOCK SPINDLE FOOT BRAKE SYSTEM, COOLANT SYSTEM WITH PUMP AND PIPING, PULL DRAWER CHIP PAN, FULL LENGTH SPLASH GUARD, TOOL BOX WITH TOOLS. S/N 2262501077	🔒 Subscribe
	NATIONAL	650 T	NATIONAL 650 T SWAGE PRESS, 650-TON CAPACITY. IDEAL FOR VARIOUS INDUSTRIAL APPLICATIONS, IT REPRESENTS RELIABLE ENGINEERING FROM A TRUSTED MANUFACTURER.	🔒 Subscribe
2015	TAKUMI	V11	2015 TAKUMI VERTICAL MACHINING CENTER MODEL V11, TRAVELS (X/Y/Z): 43.31" X 26" X 24.01", TABLE SIZE: 45.28" X 25.59" SPINDLE: GEARED, 6,000 RPM, CAT 50. SPINDLE POWER: 25 HP, ATC: 24-TOOL SWING-ARM, MAX TABLE LOAD: 2,425 LBS (1,100 KG). MACHINE WEIGHT: 17,500 LBS, S/N G13015	🔒 Subscribe
	SHARP	KMA-2	SHARP KMA-2 MANUAL MILL 17" X 74" TABLE, 47" X TRAVEL, 17" Y TRAVEL, 1500 RPM, NMTB50 TAPER SPINDLE. VERTICAL HEAD TRAVEL: 21". SPINDLE NOSE TO TABLE: 4" - 25". SPINDLE CENTER TO COLUMN: 17". VERTICAL HOUSING FEEDS: .0025 - .01 IN. PER REVOLUTION. TABLE FEEDS: 1 3/16 - 37 INCHES PER MINUTE. PENDANT CONTROLS, 3 AXIS NEWALL DRO, RAPID TRAVERSE, AUTO LUBRICATION, WORK LIGHT, LEVELING PADS, POWER DRAW BAR S/N:	🔒 Subscribe
	CINCINNATI	90AF- 8FT	8' X 90 TON CINCINNATI AUTOFORM HYDRAULIC PRESS BRAKE, MODEL 90AF- 8FT, TONNAGE: 90, OVERALL DIE SURFACE: 10', DISTANCE BETWEEN HOUSINGS: 8' 6", BED TOP ABVOE FLOOR: 34", STROKE: 14", CLOSED HEIGHT: 12", BED CROWN: .001, RAM TILT LIMIT: 1", CNC CONTROL: YES, TYPE OF CNC CONTROL: CINCINNATI, WEIGHT: 19000 POUNDS	🔒 Subscribe
	HAAS	VF-4	HAAS VF-4 CNC VERTICAL MACHINING CENTER, VMC 18 X 52 INCH TABLE, 50 INCH X TRAVEL, 20 INCH Y TRAVEL, 25 INCH Z TRAVEL, 24 SIDE MOUNT ATC, 7500 RPM, 40 TAPER, 4TH AXIS UNIT. SPINDLE HAS INTERMITTENT NOISE - SEE VIDEO. S/N: 1060084	🔒 Subscribe
	MANFORD	L-SP-500VS	NEW - UNUSED, MANFORD MODEL L-SP-500VS VERTICAL TURRET MILLING MACHINE, TABLE SIZE: 10" X 54" T-SLOTS: (3) 0.629" TABLE LONGITUDINAL TRAVEL: 34" TABLE CROSS TRAVEL: 16" KNEE VERTICAL TRAVEL: 17" RAM TRAVEL: 22"QUILL TRAVEL: 5" SPINDLE NOSE TO TABLE: 3.3" - 21" TURRET SWIVEL: 360 DEG. HEAD SWIVEL (L-R): +/- 45 DEG. HEAD TILT (UP-DOWN): +/- 45 DEG. SPINDLE TO COLUMN: 6.6" - 28.7" SPINDLE SPEEDS: 60 - 4500 RPM SPINDLE MOTOR: 3 HP SPINDLE TAPER: R8 QUILL FEEDS: (3) 0.0015, 0.003, 0.006 IPROAD: 72.4" X 83.5" X 90" HIGH WEIGHT (APPROXIMATE): 3360 LBS.	🔒 Subscribe
2013	DOALL	3612-VH	2013 DOALL 3612-VH VERTICAL CONTOUR SAW, POWERED BY A 3 HP MOTOR. FEATURES INCLUDE AUTOMATIC OPERATION, BLADE SPEEDS OF 550-5500 FPM, AND A BAND WIDTH CAPACITY OF 1/8" TO 1". DIMENSIONS: 56" X 44" X 80", WEIGHT 1900 LBS.	🔒 Subscribe
	MANFORD	L-2V	NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD. S/N A25019-01	🔒 Subscribe
	MANFORD	L-2V	NEW, MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS), 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD, S/N A25019-03	🔒 Subscribe
	MANFORD	L-2V	NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 SPINDLE, 4500 RPM, BRIDGEPORT STYLE VARIABLE SPEED HEAD. S/N A25019-02	🔒 Subscribe
	LEHMANN HYDRATROL	OIL FIELD & HOLLOW SPINDLE LATHE	LEHMANN HYDRATROL OIL FIELD & HOLLOW SPINDLE LATHE, WITH 16 INCH HOLE. SWING OVER BED: 32 INCH. SWING OVER CROSS SLIDE: 22.5 INCH. TOTAL BED LENGTH: 168 INCH. DISTANCE BETWEEN SPINDLE NOSE AND TURRET OR OPTIONAL TAILSTOCK: 135 INCH. BED WIDTH: 27.5 INCH. SPINDLE SPEEDS: (12) 5 - 150 RPM. SPINDLE MOTOR: 40 HP. SPINDLE BORE: 16.5 INCH. SPINDLE MOUNT: CYLINDRICAL. INCH THREADING: 5/8 - 72 TPI. FEEDRATES: 0.0055 - 0.64 IPR. LEADSCREW DIAMETER: 2.125 INCH. ELECTRICS: 460V / 3 PH. S/N C-249	🔒 Subscribe
	MAZAK	VTC-200C	2000 MAZAK VTC-200C CNC VERTICAL MACHINING CENTER, 20" X 77" TABLE, 65" X TRAVEL, 20" Y TRAVEL, 20" Z TRAVEL, 10K SPINDLE, CAT 40, 24 ATC, MAZATROL 640M CONTROL	🔒 Subscribe
	CINCINNATI GILBERT		4' 11" CINCINNATI GILBERT RADIAL ARM DRILL, S/N 3B6254	🔒 Subscribe
2007	KUHLMEYER	ZBS	2007 KUHLMEYER ZBS TWIN-BELT SANDING AND GRINDING FINISHING MACHINE, S/N 0705221, 480V, 6 KW, ADJUSTABLE TABLE HEIGHT, TWO SANDING BELTS, VARIABLE SPEED, DUST COLLECTION SYSTEM, 2,500 KG GROSS WEIGHT	🔒 Subscribe
	USI CLEARING	S2-500-84-48	2000 USI CLEARING S2-500-84-48 STRAIGHT SIDE DOUBLE CRANK PRESS, 500 TONNAGE, 12 INCH STROKE, 42 INCH SHUT HEIGHT, 10 INCH ADJUSTMENT, BED SIZE 84 INCH X 48 INCH, 20 - 40 STROKES PER MIN. AIR CLUTCH, S/N 10-4335	🔒 Subscribe
	TOSHIBA SHIBAURA	BTD200-QE	2000 TOSHIBA SHIBAURA BTD200-QE CNC HORIZONTAL BORING MILL, HBM - TOSHIBA SHIBAURA MODEL BTD-200QE, CNC HBM, BORING MILL, 8 INCH EXTENDABLE QUILL, 39 INCH X 39 INCH TABLE, TOSNUC CNC, AUGER/CONVEYOR	🔒 Subscribe
	EVERETT	20-22	2022 EVERETT CUT OFF SAW 20-22, 2320 RPM ENCLOSURE AIR CLAMP, S/N 02-10002	🔒 Subscribe
			96 X 60 X 30 1/2 HEAVY DUTY SHOP TABLE WITH 6 1/2 VISE, 1 1/2 SOLID TOP	🔒 Subscribe
	CRAM-A-LOT	VB-42-B	CRAM-A-LOT VB-42-B, USED. FEATURES 30"X42"X48" BALE SIZE, KEY-OPERATED CONTROLS, QUIET VANE PUMP, SIDE-MOUNTED POWER UNIT, USA-MADE. ANSI Z245.5 COMPLIANT WITH SAFETY LOCK AND PATENTED EJECT SYSTEM. IDEAL FOR EFFICIENT BALING NEEDS.	🔒 Subscribe
	METTLER-TOLEDO	DRUM FILLER	METTLER-TOLEDO DRUM FILLER DRUM AND BARREL HANDLING, METTLER TOLEDO DRUM FILLER SEMI-AUTOMATIC SINGLE CONTAINER SUB-SURFACE FILLER (NOTE: METAL 55 GALLON DRUM ONLY)	🔒 Subscribe
	CINCINNATI	BRICKFORD RADIAL ARM DRILL	CINCINNATI BRICKFORD RADIAL ARM DRILL WITH BOX TABLE, 5/32" TO 2 1/8" DRILLING CAPACITY, LARGE HOLE CAPACITY 3/4" TO 9", GEAR DRIVEN SPINDLE, MT5 SPINDLE TAPER, MECHANICAL POWER DOWN FEEDS, VARIABLE SPEEDS, 775 RPM ARM SHAFT SPEED, 480V, 3 PH.	🔒 Subscribe
2012	DALMEC	PROCESS PIPE CELL (PPC)	2012 DALMEC PROCESS PIPE CELL (PPC) MANIPULATOR, A COMPACT AND PORTABLE MANIPULATOR WITH PROGRAMMABLE OSCILLATION DESIGNED TO REVOLUTIONIZE PIPE WELDING PRODUCTIVITY. VERSATILE AND COMPATIBLE WITH VARIOUS WELDING POWER SOURCES AND WIRE FEEDERS, INCLUDING MILLER PIPEWORX AND LINCOLN POWER WAVE SYSTEMS, PPC ALLOWS FOR EFFICIENT ROOT PASSES USING ADVANCED RMD OR STT TECHNOLOGY. ADDITIONALLY, IT OFFERS PRECISION DURING HOT AND CAP PASSES, WITH A CHOICE OF SOLID, FLUX-CORE, OR METAL-CORE WIRE, ALL CONTROLLED BY A PROGRAMMABLE WELDING OSCILLATOR.	🔒 Subscribe
	STRIPPIT	CUSTOM 18/30	STRIPPIT CUSTOM 18/30 TURRET PUNCH PRESS WITH TOOLING	🔒 Subscribe
			PALLET RACKING 2 SECTIONS, 9 LONG X 4 W X 12 TALL WITH METAL CROSS SLATS SUPPORT, (3) DOUBLE SIDED UPRIGHTS (16) CROSS ARMS	🔒 Subscribe
2000	MITSUBISHI ELECTRIC	EA22	2000 MITSUBISHI ELECTRIC EA22 SINKER EDM, TABLE SIZE-W: 21 INCHES TABLE SIZE-L: 29 INCHES X-AXIS TRAVEL: 19.69 INCHES Y-AXIS TRAVEL: 15.75 INCHES Z-AXIS TRAVEL: 13.78 INCHES CNC CONTROL: YES TYPE OF CNC CONTROL: MITSUBISHI FP60EA - FUZZY PRO3 - ORBIT PRO MAX WORK PIECE DIMENSIONS: 35.43 X 23.62 X 11.81 INCHES MAX WORK PIECE WEIGHT: 2200 POUNDS INNER TANK DIMENSIONS: 37 X 25 X 15 INCHES MAX ELECTRODE WEIGHT: 220 POUNDS NEW HIGH SPEED JUMP COIN & PALLET STYLE HOLDERS MISCELLANEOUS ELECTRODES	🔒 Subscribe
			96 X 48 X 35 HEAVY DUTY SHOP TABLE WITH 3/4 SOLID THICK TOP	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT	🔒 Subscribe
	ROHM		ROHM HYDRAULIC POWER UNIT	🔒 Subscribe
	DAYTON ELECTRIC	5Z362A	DAYTON ELECTRIC 120 GALLON AIR COMPRESSOR, MODEL 5Z362A, 200 MAX PSI, CENTURY 10 HP MOTOR, 220/440 V, S/N L8/5/2014-00007	🔒 Subscribe
	ALMCO		ALMCO VIBRATING DEBURR MACHINE. THIS USED VIBRATORY MACHINE IS IDEAL FOR QUICK & EFFICIENT DEBURRING TASKS. SUITABLE FOR DIVERSE INDUSTRIAL APPLICATIONS.	🔒 Subscribe
1989	KAESER	SM 11	1989 KAESER SM 11 ROTARY SCREW & SLIDING VANE AIR COMPRESSOR, 10 HP 230/460/3/60 36 CFM 145 PSIG	🔒 Subscribe
			CRATE OF TWIST DRILLS AND MISC	🔒 Subscribe
	WELDING ENGINEERING	HPFR-HAMZ150-300 HLS / MM-3000X	LARGE LOT OF (13) WELDING ENGINEERING EQUIPMENT: FLUX SEPARATORS, HOPPERS, VACUUM SYSTEMS AND MORE. (6) VACCUMS (4) HOPPERS (3) NEW AND OLD FEED SEPARATOR. TYPES: WELDING ENGINEERING XL NEW AND OLD FLUX FEED SEPARATOR SYSTEMS, WELDING ENGINEERING HOPPER HIGH LOW SENSOR SYSTEM, MODEL HPFR-HAMZ150-300 HLS, WELDING ENGINEERING THE MIGHTY-MAC X, EXTREME VACUUM SYTEM FOR TOUGH, HEAVY DUTY FLUX RECOVERY MODEL MM-3000X, S/N 119472, 460V, 3 PH, 60 HZ	🔒 Subscribe
			CUSTOM BUILT HYDRAULIC SHOP PRESS ON CASTERS 39 X 26 X 37	🔒 Subscribe
			LOT OF 3: HD PIPE/ BAR ADJUSTABLE HOLDERS ON CASTERS	🔒 Subscribe
	SIOUX	180-C	SIOUX HOT POT WASHER MODEL 180-C, PH 1, 60 HZ, 90/180 GPH, 100/500 PSI S/N 0010002	🔒 Subscribe
2017	EDGE TECHNOLOGIES	REBEL 80 SERVO V3	2017 EDGE TECHNOLOGIES REBEL 80 SERVO V3 MAGAZINE BAR LOADER, MODEL REBEL80GENII. MIN. DIAMETER (ROUND): .315 TO 3.150 INCHES, MAXIMUM BAR STOCK LENGTH: 60 INCHES, S/N T4201707002	🔒 Subscribe
	DIGIWEIGH	DWP-102E	48 X 48 DIGIWEIGH DIGITAL SCALE MODEL DWP-102E	🔒 Subscribe
			CRATE OF ASSORTED 60 TAPER TOOLING FOR GIDDINGS & LEWIS G & L VERTICAL BORING MILL VTL	🔒 Subscribe
	MATHEY DEARMAN	711 SERIES	MATHEY DEARMAN STANDARD & MEGA RIM CLAMP, DEARMAN 711 SERIES, S/N 78180	🔒 Subscribe
			30 INCH ID STEADY REST	🔒 Subscribe

2015 ZEISS CONTURA 7/10/6 RDS

TEST, MEASUREMENT & QUALITY EQUIPMENT

2015 ZEISS CONTURA 7/10/6 RDS 5-AXIS CMM WITH VAST XXT PROBE, RDS ROTARY PROBE HEAD, VAST XXT SCANNI...

Hammer Price: 🔒

SUNMASTER CH-2690

METALWORKING & FABRICATION EQUIPMENT

26" X 90" SUNMASTER MODEL CH-2690 ENGINE LATHE, NEW - 26" X 90" SWING OVER BED: 26" SWING OVER CROSS...

Hammer Price: 🔒

PECK-O-MATIC 814

MISC

PECK-O-MATIC BUCKING UNIT, MODEL 814. OD RANGE: 3 1/8 - 21 INCH. MIN. TORQUE: 5,000 FT-LB. MAX TORQU...

Hammer Price: 🔒

ACCURSHEAR 862510

METALWORKING & FABRICATION EQUIPMENT

ACCURSHEAR HEAVY-DUTY 5/8" X 10' HYDRAULIC POWER SQUARING SHEAR MODEL 862510, CAPACITY 5/8" (0.625")...

Hammer Price: 🔒

PECK-O-MATIC 637

OIL & GAS EQUIPMENT

PECK-O-MATIC BUCKING UNIT MODE: 637 OD RANGE: 1-15/16 - 75/8 IN. MINIMUM TORQUE: 300 FT.-LB MAXIMUM ...

Hammer Price: 🔒

2011 VENTIL HC1000

TEST, MEASUREMENT & QUALITY EQUIPMENT

2011 VENTIL HORIZONTAL VALVE TEST UNIT, 2-36 CAPACITY, MODEL HC1000. SEMI-AUTOMATIC TEST UNIT FOR PR...

Hammer Price: 🔒

2011 TAKUMI V-20

CNC MACHINE CENTERS

2011 TAKUMI V-20 VERTICAL MACHINING CENTER, S/N N0286, CONTROLLER: FANUC 0I-MD, TRAVEL: 70.87 (1800 ...

Hammer Price: 🔒

2025 SUNMASTER CH-2260

METALWORKING & FABRICATION EQUIPMENT

2025 SUNMASTER CH-2260 MANUAL LATHE, 22 INCH X 60 INCH, SWING OVER BED: 22 INCH, SWING OVER CROSS SL...

Hammer Price: 🔒

NATIONAL 650 T

PRESSES & FORMING

NATIONAL 650 T SWAGE PRESS, 650-TON CAPACITY. IDEAL FOR VARIOUS INDUSTRIAL APPLICATIONS, IT REPRESEN...

Hammer Price: 🔒

2015 TAKUMI V11

CNC MACHINE CENTERS

2015 TAKUMI VERTICAL MACHINING CENTER MODEL V11, TRAVELS (X/Y/Z): 43.31" X 26" X 24.01", TABLE SIZE:...

Hammer Price: 🔒

SHARP KMA-2

METALWORKING & FABRICATION EQUIPMENT

SHARP KMA-2 MANUAL MILL 17" X 74" TABLE, 47" X TRAVEL, 17" Y TRAVEL, 1500 RPM, NMTB50 TAPER SPINDLE....

Hammer Price: 🔒

CINCINNATI 90AF- 8FT

PRESSES & FORMING

8' X 90 TON CINCINNATI AUTOFORM HYDRAULIC PRESS BRAKE, MODEL 90AF- 8FT, TONNAGE: 90, OVERALL DIE SUR...

Hammer Price: 🔒

HAAS VF-4

CNC MACHINE CENTERS

HAAS VF-4 CNC VERTICAL MACHINING CENTER, VMC 18 X 52 INCH TABLE, 50 INCH X TRAVEL, 20 INCH Y TRAVEL,...

Hammer Price: 🔒

MANFORD L-SP-500VS

METALWORKING & FABRICATION EQUIPMENT

NEW - UNUSED, MANFORD MODEL L-SP-500VS VERTICAL TURRET MILLING MACHINE, TABLE SIZE: 10" X 54" T-SLOT...

Hammer Price: 🔒

2013 DOALL 3612-VH

METALWORKING & FABRICATION EQUIPMENT

2013 DOALL 3612-VH VERTICAL CONTOUR SAW, POWERED BY A 3 HP MOTOR. FEATURES INCLUDE AUTOMATIC OPERATI...

Hammer Price: 🔒

MANFORD L-2V

METALWORKING & FABRICATION EQUIPMENT

NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 S...

Hammer Price: 🔒

MANFORD L-2V

METALWORKING & FABRICATION EQUIPMENT

NEW, MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS), 9" X 49" TABLE, 3 HP, R-8 SPIN...

Hammer Price: 🔒

MANFORD L-2V

METALWORKING & FABRICATION EQUIPMENT

NEW MANFORD MODEL L-2V VERTICAL TURRET MILLING MACHINE (MF-1 1/2VS) WITH 9" X 49" TABLE, 3 HP, R-8 S...

Hammer Price: 🔒

LEHMANN HYDRATROL OIL FIELD & HOLLOW SPINDLE LATHE

METALWORKING & FABRICATION EQUIPMENT

LEHMANN HYDRATROL OIL FIELD & HOLLOW SPINDLE LATHE, WITH 16 INCH HOLE. SWING OVER BED: 32 INCH. SWIN...

Hammer Price: 🔒

MAZAK VTC-200C

CNC MACHINE CENTERS

2000 MAZAK VTC-200C CNC VERTICAL MACHINING CENTER, 20" X 77" TABLE, 65" X TRAVEL, 20" Y TRAVEL, 20" ...

Hammer Price: 🔒

CINCINNATI GILBERT

METALWORKING & FABRICATION EQUIPMENT

4' 11" CINCINNATI GILBERT RADIAL ARM DRILL, S/N 3B6254...

Hammer Price: 🔒

2007 KUHLMEYER ZBS

SURFACE FINISHING EQUIPMENT

2007 KUHLMEYER ZBS TWIN-BELT SANDING AND GRINDING FINISHING MACHINE, S/N 0705221, 480V, 6 KW, ADJUST...

Hammer Price: 🔒

USI CLEARING S2-500-84-48

PRESSES & FORMING

2000 USI CLEARING S2-500-84-48 STRAIGHT SIDE DOUBLE CRANK PRESS, 500 TONNAGE, 12 INCH STROKE, 42 INC...

Hammer Price: 🔒

TOSHIBA SHIBAURA BTD200-QE

CNC MACHINE CENTERS

2000 TOSHIBA SHIBAURA BTD200-QE CNC HORIZONTAL BORING MILL, HBM - TOSHIBA SHIBAURA MODEL BTD-200QE, ...

Hammer Price: 🔒

EVERETT 20-22

METALWORKING & FABRICATION EQUIPMENT

2022 EVERETT CUT OFF SAW 20-22, 2320 RPM ENCLOSURE AIR CLAMP, S/N 02-10002...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

96 X 60 X 30 1/2 HEAVY DUTY SHOP TABLE WITH 6 1/2 VISE, 1 1/2 SOLID TOP...

Hammer Price: 🔒

CRAM-A-LOT VB-42-B

MISC

CRAM-A-LOT VB-42-B, USED. FEATURES 30"X42"X48" BALE SIZE, KEY-OPERATED CONTROLS, QUIET VANE PUMP, SI...

Hammer Price: 🔒

METTLER-TOLEDO DRUM FILLER

PACKAGING EQUIPMENT

METTLER-TOLEDO DRUM FILLER DRUM AND BARREL HANDLING, METTLER TOLEDO DRUM FILLER SEMI-AUTOMATIC SINGL...

Hammer Price: 🔒

CINCINNATI BRICKFORD RADIAL ARM DRILL

METALWORKING & FABRICATION EQUIPMENT

CINCINNATI BRICKFORD RADIAL ARM DRILL WITH BOX TABLE, 5/32" TO 2 1/8" DRILLING CAPACITY, LARGE HOLE ...

Hammer Price: 🔒

2012 DALMEC PROCESS PIPE CELL (PPC)

WELDING & CUTTING

2012 DALMEC PROCESS PIPE CELL (PPC) MANIPULATOR, A COMPACT AND PORTABLE MANIPULATOR WITH PROGRAMMABL...

Hammer Price: 🔒

STRIPPIT CUSTOM 18/30

PRESSES & FORMING

STRIPPIT CUSTOM 18/30 TURRET PUNCH PRESS WITH TOOLING...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

PALLET RACKING 2 SECTIONS, 9 LONG X 4 W X 12 TALL WITH METAL CROSS SLATS SUPPORT, (3) DOUBLE SIDED U...

Hammer Price: 🔒

2000 MITSUBISHI ELECTRIC EA22

METALWORKING & FABRICATION EQUIPMENT

2000 MITSUBISHI ELECTRIC EA22 SINKER EDM, TABLE SIZE-W: 21 INCHES TABLE SIZE-L: 29 INCHES X-AXIS TRA...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

96 X 48 X 35 HEAVY DUTY SHOP TABLE WITH 3/4 SOLID THICK TOP...

Hammer Price: 🔒

ROHM

MISC

ROHM HYDRAULIC POWER UNIT...

Hammer Price: 🔒

ROHM

MISC

ROHM HYDRAULIC POWER UNIT...

Hammer Price: 🔒

ROHM

MISC

ROHM HYDRAULIC POWER UNIT...

Hammer Price: 🔒

DAYTON ELECTRIC 5Z362A

AIR COMPRESSORS

DAYTON ELECTRIC 120 GALLON AIR COMPRESSOR, MODEL 5Z362A, 200 MAX PSI, CENTURY 10 HP MOTOR, 220/440 V...

Hammer Price: 🔒

ALMCO

SURFACE FINISHING EQUIPMENT

ALMCO VIBRATING DEBURR MACHINE. THIS USED VIBRATORY MACHINE IS IDEAL FOR QUICK & EFFICIENT DEBURRING...

Hammer Price: 🔒

1989 KAESER SM 11

AIR COMPRESSORS

1989 KAESER SM 11 ROTARY SCREW & SLIDING VANE AIR COMPRESSOR, 10 HP 230/460/3/60 36 CFM 145 PSIG...

Hammer Price: 🔒

POWER AND HAND TOOLS

CRATE OF TWIST DRILLS AND MISC...

Hammer Price: 🔒

WELDING ENGINEERING HPFR-HAMZ150-300 HLS / MM-3000X

MISC

LARGE LOT OF (13) WELDING ENGINEERING EQUIPMENT: FLUX SEPARATORS, HOPPERS, VACUUM SYSTEMS AND MORE. ...

Hammer Price: 🔒

PRESSES & FORMING

CUSTOM BUILT HYDRAULIC SHOP PRESS ON CASTERS 39 X 26 X 37...

Hammer Price: 🔒

MISC

LOT OF 3: HD PIPE/ BAR ADJUSTABLE HOLDERS ON CASTERS...

Hammer Price: 🔒

SIOUX 180-C

MISC

SIOUX HOT POT WASHER MODEL 180-C, PH 1, 60 HZ, 90/180 GPH, 100/500 PSI S/N 0010002...

Hammer Price: 🔒

2017 EDGE TECHNOLOGIES REBEL 80 SERVO V3

METALWORKING & FABRICATION EQUIPMENT

2017 EDGE TECHNOLOGIES REBEL 80 SERVO V3 MAGAZINE BAR LOADER, MODEL REBEL80GENII. MIN. DIAMETER (ROU...

Hammer Price: 🔒

DIGIWEIGH DWP-102E

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

48 X 48 DIGIWEIGH DIGITAL SCALE MODEL DWP-102E...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

CRATE OF ASSORTED 60 TAPER TOOLING FOR GIDDINGS & LEWIS G & L VERTICAL BORING MILL VTL...

Hammer Price: 🔒

MATHEY DEARMAN 711 SERIES

METALWORKING & FABRICATION EQUIPMENT

MATHEY DEARMAN STANDARD & MEGA RIM CLAMP, DEARMAN 711 SERIES, S/N 78180...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

30 INCH ID STEADY REST...

Hammer Price: 🔒

1 2 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Fabrication Machining Equip Industrial Surplus

Save to Project Folder

Print Options

Save to Project Folder