• Items
  • Auctions
  • Auctioneers
  • Items
  • Auctions
  • Auctioneers

Lumber Mill Equipment Auction Online Only Auction

Ewald Auctions
Category: MISC
Total Lots: 63
Total Sales: 🔒 Subscribe
Lot Price Distribution
🔒
Subscribe to view
Unlock price distribution and full auction analytics
Sort:
Showing 1–50 of 63 lots
Year Make Model Lot Description Hammer Price
2003 MCDONOUGH V-54 2003 MCDONOUGH V-54
2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, COMPLETE HYDRAULIC SYSTEM, TOOLING, MEADOWS EDGING SYSTEM, GREEN CHAIN AND OUTFEED CONVEYOR. S/N 54EC-1534. WITH EXTRA BLADES.
2003 · MCDONOUGH · V-54
 🔒 Subscribe
CATERPILLAR 930 CATERPILLAR 930
2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES AND OPERATES GOOD. THE PUDDLE OF HYDRAULIC FLUID UNDERNEATH THE RIGHT FRONT TIRE, IS A HYDRAULIC LEAK THAT WILL NEED TO BE REPAIRED. S/N 79J6783
CATERPILLAR · 930
 🔒 Subscribe
1976 CATERPILLAR 920 1976 CATERPILLAR 920
1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND OPERATES PER MECHANIC. WORK HORSE. USED TO LOAD ALL LUMBER.
1976 · CATERPILLAR · 920
 🔒 Subscribe
BAKER BT-O BAKER BT-O
BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLUDES CHUTE TO TURN-AROUND, WITH CANT TURNER, TO 30HP HORIZONTAL RESAW, TO TURN-A-ROUND, MODEL BT-O. BAKER BAND RESAW SYSTEM S/N 98-2534 UNSCRAMBLE S/N 10-130, TURNAROUND S/N'S 98-556 & 98-557
BAKER · BT-O
 🔒 Subscribe
2003 WINTERSTEIGER DSG-150 ECO 2003 WINTERSTEIGER DSG-150 ECO
2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, .3 TO 1.5MM FEED SPEED, 60 TO 150 MAX CUTTING WIDTH USING SIDE GUIDE, INCLUDING TWO SAW FRAMES WITH SAWS. S/N 5852-2003-0375
2003 · WINTERSTEIGER · DSG-150 ECO
 🔒 Subscribe
NISSAN WFO3A35V NISSAN WFO3A35V
NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE, PNEUMATIC TIRES, 15,502 HOURS. MECHANIC GOT IT RUNNING, GOOD TO GO.
NISSAN · WFO3A35V
 🔒 Subscribe
2008 FRUILMAC 349-1A 2008 FRUILMAC 349-1A
2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABLE, MIG D S/N: RANDOMAT-E
2008 · FRUILMAC · 349-1A
 🔒 Subscribe
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH)
WOODMIZER · SUPER HYDRAULIC HORIZONTAL BAND MILL
 🔒 Subscribe
NICHOLSON 2075 NICHOLSON 2075
NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED VIBRATING CONVEYOR (MOTOR MISSING) WITH CHUTE
NICHOLSON · 2075
 🔒 Subscribe
1995 WEINIG H-22-A 1995 WEINIG H-22-A
1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, HOODS, GUARDS, AND ALL STANDARD EQUIPMENT S/N 222-2201, WIRED 440/60/3.
1995 · WEINIG · H-22-A
 🔒 Subscribe
JAMES L. TAYLOR JAMES L. TAYLOR
JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPENING. INCLUDES PIPE WRENCHES.
JAMES L. TAYLOR
 🔒 Subscribe
NORTHTECH NT-24-10 HCRS NORTHTECH NT-24-10 HCRS
NORTHTECH NT-24-10 HCRS PLANER
NORTHTECH · NT-24-10 HCRS
 🔒 Subscribe
AURORA AURORA
AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH X 48 INCH (2 450 + 4 400)
AURORA
 🔒 Subscribe
TOYOTA FD-30 TOYOTA FD-30
2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIRES, 24,706 HOURS. NEEDS NEW ENGINE. HAS NOT RUN IN OVER A YEAR.
TOYOTA · FD-30
 🔒 Subscribe
Equipment
SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BELT CONVEYOR, WITH SIX (6) CHAIN INCLINED CONVEYOR, 14-FOOT WIDE X 20-FOOT LONG, FEEDING 12-INCH WIDE X 35-FOOT LONG ROLLER CONVEYOR, WITH BOARD FLIPPER, SINGULATOR, 13-INCH WIDE X 8-FOOT LONG, (3-STOPS) FEEDING OPTIMIZING SAW, INCLUDING TWO POWERED HOLD-DOWNS.
🔒 Subscribe
Equipment
MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2 INCH & 4 INCH LONG X 4-KNIFE HEADS, CABINET FULL OF BLADES, PARTS AND MORE.
🔒 Subscribe
AMERICAN MATERIAL HANDLING AMERICAN MATERIAL HANDLING
6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN
AMERICAN MATERIAL HANDLING
 🔒 Subscribe
2001 WEINIG 970070 2001 WEINIG 970070
2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379
2001 · WEINIG · 970070
 🔒 Subscribe
CLUB CAR CLUB CAR
CLUB CAR GOLF CART - RUNS
CLUB CAR
 🔒 Subscribe
AMERICAN AMERICAN
AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AND CONTROLS
AMERICAN
 🔒 Subscribe
AUTOQUIP AUTOQUIP
AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS
AUTOQUIP
 🔒 Subscribe
1965 DIEHL SL-50 1965 DIEHL SL-50
1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-DRIVE FEED MOTOR, AUTOMATIC CHAIN OILER, OVERHEAD FEED ROLLS, ADJUSTABLE RIP FENCE, WITH GAUGE. S/N: 65-M-1384689
1965 · DIEHL · SL-50
 🔒 Subscribe
INVICTA TI-14 INVICTA TI-14
INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X 5 INCH CAPACITY, ADJUSTABLE SHAPER FENCE, AND INCLUDING A GRIZZLY 3-ROLL POWER FEEDER WITH FOUR (4) FEED SPEEDS, S/N 1638
INVICTA · TI-14
 🔒 Subscribe
CAT CAT
FORK ATTACHMENT FOR CAT
CAT
 🔒 Subscribe
CATERPILLAR CATERPILLAR
BUCKET ATTACHMENT FOR CAT
CATERPILLAR
 🔒 Subscribe
1995 WEINIG 934 1995 WEINIG 934
1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600
1995 · WEINIG · 934
 🔒 Subscribe
MAKITA 5402NA MAKITA 5402NA
MAKITA CIRCULAR SAW MODEL 5402NA
MAKITA · 5402NA
 🔒 Subscribe
Equipment
PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, THREE (3) WEED EATERS, EXTRA SAW CHAINS, AND MISC. TOOLS
🔒 Subscribe
Equipment
2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET
🔒 Subscribe
2003 SOUTHWORTH 2003 SOUTHWORTH
2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL
2003 · SOUTHWORTH
 🔒 Subscribe
REES-MEMPHIS REES-MEMPHIS
REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH LONG BAGS
REES-MEMPHIS
 🔒 Subscribe
CAMPBELL HAUSFELD CAMPBELL HAUSFELD
HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK
CAMPBELL HAUSFELD
 🔒 Subscribe
CATERPILLAR CATERPILLAR
RAKE ATTACHMENT FOR CAT
CATERPILLAR
 🔒 Subscribe
ROCKWELL ROCKWELL
ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WITH CONTROLS, 6 INCH X 50 INCH TILT FENCE S/N: 80177
ROCKWELL
 🔒 Subscribe
Equipment
3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT
🔒 Subscribe
ROCKWELL / DELTA 34-390 ROCKWELL / DELTA 34-390
1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OVERHEAD SAW GUARD, RIP FENCE, 7-1/2HP SAW MOTOR AND CONTROLS S/N: 981-B
ROCKWELL / DELTA · 34-390
 🔒 Subscribe
JOHN DEERE LA145 JOHN DEERE LA145
2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING.
JOHN DEERE · LA145
 🔒 Subscribe
DEWALT 12" MITER SAW DEWALT 12" MITER SAW
12" MITER SAW WITH STAND
DEWALT · 12" MITER SAW
 🔒 Subscribe
GRIZZLY GRIZZLY
GRIZZLY BELT SANDER
GRIZZLY
 🔒 Subscribe
CEMCO URF-37M CEMCO URF-37M
2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDING 40HP CONTACT DRUM ON FIRST HEAD, AND 30HP POLISHING PLATEN ON SECOND HEAD, VARI-DRIVE FEEDWORKS, AMMETERS, AND ALL CONTROLS.
CEMCO · URF-37M
 🔒 Subscribe
ROCKWELL 40-C ROCKWELL 40-C
19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5HP ARBOR MOTOR WITH CONTROLS, SPRING RETURN FOR CARRIAGE
ROCKWELL · 40-C
 🔒 Subscribe
212 212
WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES, SAW GUARD, CLAMP
212
 🔒 Subscribe
Equipment
MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST
🔒 Subscribe
DEWALT DEWALT
DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2)
DEWALT
 🔒 Subscribe
DELTA 14" DELTA 14"
DELTA 14" FLOOR MODEL BANDSAW
DELTA · 14"
 🔒 Subscribe
LOBO DC-9100 LOBO DC-9100
LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72 LONG BAGS
LOBO · DC-9100
 🔒 Subscribe
CAT CAT
FORKS ATTACHMENT FOR CAT
CAT
 🔒 Subscribe
BEST FLEX BEST FLEX
BEST FLEX CONVEYOR
BEST FLEX
 🔒 Subscribe
HITACHI P12R HITACHI P12R
HITACHI P12R PLANER
HITACHI · P12R
 🔒 Subscribe
Equipment
PERSONEL FORK ATTACHMENT
🔒 Subscribe
Year Make Model Description Price
2003 MCDONOUGH V-54 2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, COMPLETE HYDRAULIC SYSTEM, TOOLING, MEADOWS EDGING SYSTEM, GREEN CHAIN AND OUTFEED CONVEYOR. S/N 54EC-1534. WITH EXTRA BLADES. 🔒 Subscribe
CATERPILLAR 930 2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES AND OPERATES GOOD. THE PUDDLE OF HYDRAULIC FLUID UNDERNEATH THE RIGHT FRONT TIRE, IS A HYDRAULIC LEAK THAT WILL NEED TO BE REPAIRED. S/N 79J6783 🔒 Subscribe
1976 CATERPILLAR 920 1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND OPERATES PER MECHANIC. WORK HORSE. USED TO LOAD ALL LUMBER. 🔒 Subscribe
BAKER BT-O BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLUDES CHUTE TO TURN-AROUND, WITH CANT TURNER, TO 30HP HORIZONTAL RESAW, TO TURN-A-ROUND, MODEL BT-O. BAKER BAND RESAW SYSTEM S/N 98-2534 UNSCRAMBLE S/N 10-130, TURNAROUND S/N'S 98-556 & 98-557 🔒 Subscribe
2003 WINTERSTEIGER DSG-150 ECO 2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, .3 TO 1.5MM FEED SPEED, 60 TO 150 MAX CUTTING WIDTH USING SIDE GUIDE, INCLUDING TWO SAW FRAMES WITH SAWS. S/N 5852-2003-0375 🔒 Subscribe
NISSAN WFO3A35V NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE, PNEUMATIC TIRES, 15,502 HOURS. MECHANIC GOT IT RUNNING, GOOD TO GO. 🔒 Subscribe
2008 FRUILMAC 349-1A 2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABLE, MIG D S/N: RANDOMAT-E 🔒 Subscribe
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH) 🔒 Subscribe
NICHOLSON 2075 NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED VIBRATING CONVEYOR (MOTOR MISSING) WITH CHUTE 🔒 Subscribe
1995 WEINIG H-22-A 1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, HOODS, GUARDS, AND ALL STANDARD EQUIPMENT S/N 222-2201, WIRED 440/60/3. 🔒 Subscribe
JAMES L. TAYLOR JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPENING. INCLUDES PIPE WRENCHES. 🔒 Subscribe
NORTHTECH NT-24-10 HCRS NORTHTECH NT-24-10 HCRS PLANER 🔒 Subscribe
AURORA AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH X 48 INCH (2 450 + 4 400) 🔒 Subscribe
TOYOTA FD-30 2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIRES, 24,706 HOURS. NEEDS NEW ENGINE. HAS NOT RUN IN OVER A YEAR. 🔒 Subscribe
SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BELT CONVEYOR, WITH SIX (6) CHAIN INCLINED CONVEYOR, 14-FOOT WIDE X 20-FOOT LONG, FEEDING 12-INCH WIDE X 35-FOOT LONG ROLLER CONVEYOR, WITH BOARD FLIPPER, SINGULATOR, 13-INCH WIDE X 8-FOOT LONG, (3-STOPS) FEEDING OPTIMIZING SAW, INCLUDING TWO POWERED HOLD-DOWNS. 🔒 Subscribe
MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2 INCH & 4 INCH LONG X 4-KNIFE HEADS, CABINET FULL OF BLADES, PARTS AND MORE. 🔒 Subscribe
AMERICAN MATERIAL HANDLING 6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN 🔒 Subscribe
2001 WEINIG 970070 2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379 🔒 Subscribe
CLUB CAR CLUB CAR GOLF CART - RUNS 🔒 Subscribe
AMERICAN AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AND CONTROLS 🔒 Subscribe
AUTOQUIP AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS 🔒 Subscribe
1965 DIEHL SL-50 1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-DRIVE FEED MOTOR, AUTOMATIC CHAIN OILER, OVERHEAD FEED ROLLS, ADJUSTABLE RIP FENCE, WITH GAUGE. S/N: 65-M-1384689 🔒 Subscribe
INVICTA TI-14 INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X 5 INCH CAPACITY, ADJUSTABLE SHAPER FENCE, AND INCLUDING A GRIZZLY 3-ROLL POWER FEEDER WITH FOUR (4) FEED SPEEDS, S/N 1638 🔒 Subscribe
CAT FORK ATTACHMENT FOR CAT 🔒 Subscribe
CATERPILLAR BUCKET ATTACHMENT FOR CAT 🔒 Subscribe
1995 WEINIG 934 1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600 🔒 Subscribe
MAKITA 5402NA MAKITA CIRCULAR SAW MODEL 5402NA 🔒 Subscribe
PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, THREE (3) WEED EATERS, EXTRA SAW CHAINS, AND MISC. TOOLS 🔒 Subscribe
2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET 🔒 Subscribe
2003 SOUTHWORTH 2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL 🔒 Subscribe
REES-MEMPHIS REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH LONG BAGS 🔒 Subscribe
CAMPBELL HAUSFELD HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK 🔒 Subscribe
CATERPILLAR RAKE ATTACHMENT FOR CAT 🔒 Subscribe
ROCKWELL ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WITH CONTROLS, 6 INCH X 50 INCH TILT FENCE S/N: 80177 🔒 Subscribe
3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT 🔒 Subscribe
ROCKWELL / DELTA 34-390 1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OVERHEAD SAW GUARD, RIP FENCE, 7-1/2HP SAW MOTOR AND CONTROLS S/N: 981-B 🔒 Subscribe
JOHN DEERE LA145 2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING. 🔒 Subscribe
DEWALT 12" MITER SAW 12" MITER SAW WITH STAND 🔒 Subscribe
GRIZZLY GRIZZLY BELT SANDER 🔒 Subscribe
CEMCO URF-37M 2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDING 40HP CONTACT DRUM ON FIRST HEAD, AND 30HP POLISHING PLATEN ON SECOND HEAD, VARI-DRIVE FEEDWORKS, AMMETERS, AND ALL CONTROLS. 🔒 Subscribe
ROCKWELL 40-C 19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5HP ARBOR MOTOR WITH CONTROLS, SPRING RETURN FOR CARRIAGE 🔒 Subscribe
212 WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES, SAW GUARD, CLAMP 🔒 Subscribe
MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST 🔒 Subscribe
DEWALT DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2) 🔒 Subscribe
DELTA 14" DELTA 14" FLOOR MODEL BANDSAW 🔒 Subscribe
LOBO DC-9100 LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72 LONG BAGS 🔒 Subscribe
CAT FORKS ATTACHMENT FOR CAT 🔒 Subscribe
BEST FLEX BEST FLEX CONVEYOR 🔒 Subscribe
HITACHI P12R HITACHI P12R PLANER 🔒 Subscribe
PERSONEL FORK ATTACHMENT 🔒 Subscribe
2003 MCDONOUGH V-54 photo
2003 MCDONOUGH V-54
MISC
2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, ...
Hammer Price: 🔒
CATERPILLAR 930 photo
CATERPILLAR 930
EARTH MOVING EQUIPMENT
2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES A...
Hammer Price: 🔒
1976 CATERPILLAR 920 photo
1976 CATERPILLAR 920
EARTH MOVING EQUIPMENT
1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND...
Hammer Price: 🔒
BAKER BT-O photo
BAKER BT-O
MISC
BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLU...
Hammer Price: 🔒
2003 WINTERSTEIGER DSG-150 ECO photo
2003 WINTERSTEIGER DSG-150 ECO
MISC
2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, ...
Hammer Price: 🔒
NISSAN WFO3A35V photo
NISSAN WFO3A35V
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE,...
Hammer Price: 🔒
2008 FRUILMAC 349-1A photo
2008 FRUILMAC 349-1A
PACKAGING EQUIPMENT
2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABL...
Hammer Price: 🔒
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL photo
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL
MISC
WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH)...
Hammer Price: 🔒
NICHOLSON 2075 photo
NICHOLSON 2075
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED V...
Hammer Price: 🔒
1995 WEINIG H-22-A photo
1995 WEINIG H-22-A
METALWORKING & FABRICATION EQUIPMENT
1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, H...
Hammer Price: 🔒
JAMES L. TAYLOR photo
JAMES L. TAYLOR
METALWORKING & FABRICATION EQUIPMENT
JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPE...
Hammer Price: 🔒
NORTHTECH NT-24-10 HCRS photo
NORTHTECH NT-24-10 HCRS
METALWORKING & FABRICATION EQUIPMENT
NORTHTECH NT-24-10 HCRS PLANER...
Hammer Price: 🔒
AURORA photo
AURORA
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH ...
Hammer Price: 🔒
TOYOTA FD-30 photo
TOYOTA FD-30
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIR...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BEL...
Hammer Price: 🔒
Equipment photo
METALWORKING & FABRICATION EQUIPMENT
MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2...
Hammer Price: 🔒
AMERICAN MATERIAL HANDLING photo
AMERICAN MATERIAL HANDLING
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN...
Hammer Price: 🔒
2001 WEINIG 970070 photo
2001 WEINIG 970070
AUDIO/VISUAL & STUDIO EQUIPMENT
2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379...
Hammer Price: 🔒
CLUB CAR photo
CLUB CAR
MISC
CLUB CAR GOLF CART - RUNS...
Hammer Price: 🔒
AMERICAN photo
AMERICAN
MISC
AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AN...
Hammer Price: 🔒
AUTOQUIP photo
AUTOQUIP
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS...
Hammer Price: 🔒
1965 DIEHL SL-50 photo
1965 DIEHL SL-50
METALWORKING & FABRICATION EQUIPMENT
1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-D...
Hammer Price: 🔒
INVICTA TI-14 photo
INVICTA TI-14
METALWORKING & FABRICATION EQUIPMENT
INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X...
Hammer Price: 🔒
CAT photo
CAT
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
FORK ATTACHMENT FOR CAT...
Hammer Price: 🔒
CATERPILLAR photo
CATERPILLAR
EARTH MOVING EQUIPMENT
BUCKET ATTACHMENT FOR CAT...
Hammer Price: 🔒
1995 WEINIG 934 photo
1995 WEINIG 934
METALWORKING & FABRICATION EQUIPMENT
1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600...
Hammer Price: 🔒
MAKITA 5402NA photo
MAKITA 5402NA
WOODWORKING EQUIPMENT
MAKITA CIRCULAR SAW MODEL 5402NA...
Hammer Price: 🔒
Equipment photo
MISC
PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, TH...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET...
Hammer Price: 🔒
2003 SOUTHWORTH photo
2003 SOUTHWORTH
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL...
Hammer Price: 🔒
REES-MEMPHIS photo
REES-MEMPHIS
DUST COLLECTION EQUIPMENT
REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH ...
Hammer Price: 🔒
CAMPBELL HAUSFELD photo
CAMPBELL HAUSFELD
AIR COMPRESSORS
HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK...
Hammer Price: 🔒
CATERPILLAR photo
CATERPILLAR
CONSTRUCTION EQUIPMENT
RAKE ATTACHMENT FOR CAT...
Hammer Price: 🔒
ROCKWELL photo
ROCKWELL
METALWORKING & FABRICATION EQUIPMENT
ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WIT...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT...
Hammer Price: 🔒
ROCKWELL / DELTA 34-390 photo
ROCKWELL / DELTA 34-390
METALWORKING & FABRICATION EQUIPMENT
1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OV...
Hammer Price: 🔒
JOHN DEERE LA145 photo
JOHN DEERE LA145
AGRICULTURAL EQUIPMENT
2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING....
Hammer Price: 🔒
DEWALT 12" MITER SAW photo
DEWALT 12" MITER SAW
WOODWORKING EQUIPMENT
12" MITER SAW WITH STAND...
Hammer Price: 🔒
GRIZZLY photo
GRIZZLY
SURFACE FINISHING EQUIPMENT
GRIZZLY BELT SANDER...
Hammer Price: 🔒
CEMCO URF-37M photo
CEMCO URF-37M
SURFACE FINISHING EQUIPMENT
2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDI...
Hammer Price: 🔒
ROCKWELL 40-C photo
ROCKWELL 40-C
METALWORKING & FABRICATION EQUIPMENT
19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5...
Hammer Price: 🔒
212 photo
212
WOODWORKING EQUIPMENT
WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES,...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST...
Hammer Price: 🔒
DEWALT photo
DEWALT
METALWORKING & FABRICATION EQUIPMENT
DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2)...
Hammer Price: 🔒
DELTA 14" photo
DELTA 14"
METALWORKING & FABRICATION EQUIPMENT
DELTA 14" FLOOR MODEL BANDSAW...
Hammer Price: 🔒
LOBO DC-9100 photo
LOBO DC-9100
DUST COLLECTION EQUIPMENT
LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72...
Hammer Price: 🔒
CAT photo
CAT
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
FORKS ATTACHMENT FOR CAT...
Hammer Price: 🔒
BEST FLEX photo
BEST FLEX
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BEST FLEX CONVEYOR...
Hammer Price: 🔒
HITACHI P12R photo
HITACHI P12R
METALWORKING & FABRICATION EQUIPMENT
HITACHI P12R PLANER...
Hammer Price: 🔒
Equipment photo
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
PERSONEL FORK ATTACHMENT...
Hammer Price: 🔒

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.