Lumber Mill Equipment Auction Online Only Auction

Ewald Auctions

Category: MISC

Total Lots: 63

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 63 lots

Year	Make	Model	Lot Description	Hammer Price
2003	MCDONOUGH	V-54	2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, COMPLETE HYDRAULIC SYSTEM, TOOLING, MEADOWS EDGING SYSTEM, GREEN CHAIN AND OUTFEED CONVEYOR. S/N 54EC-1534. WITH EXTRA BLADES. 2003 · MCDONOUGH · V-54	🔒 Subscribe
	CATERPILLAR	930	2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES AND OPERATES GOOD. THE PUDDLE OF HYDRAULIC FLUID UNDERNEATH THE RIGHT FRONT TIRE, IS A HYDRAULIC LEAK THAT WILL NEED TO BE REPAIRED. S/N 79J6783 CATERPILLAR · 930	🔒 Subscribe
1976	CATERPILLAR	920	1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND OPERATES PER MECHANIC. WORK HORSE. USED TO LOAD ALL LUMBER. 1976 · CATERPILLAR · 920	🔒 Subscribe
	BAKER	BT-O	BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLUDES CHUTE TO TURN-AROUND, WITH CANT TURNER, TO 30HP HORIZONTAL RESAW, TO TURN-A-ROUND, MODEL BT-O. BAKER BAND RESAW SYSTEM S/N 98-2534 UNSCRAMBLE S/N 10-130, TURNAROUND S/N'S 98-556 & 98-557 BAKER · BT-O	🔒 Subscribe
2003	WINTERSTEIGER	DSG-150 ECO	2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, .3 TO 1.5MM FEED SPEED, 60 TO 150 MAX CUTTING WIDTH USING SIDE GUIDE, INCLUDING TWO SAW FRAMES WITH SAWS. S/N 5852-2003-0375 2003 · WINTERSTEIGER · DSG-150 ECO	🔒 Subscribe
	NISSAN	WFO3A35V	NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE, PNEUMATIC TIRES, 15,502 HOURS. MECHANIC GOT IT RUNNING, GOOD TO GO. NISSAN · WFO3A35V	🔒 Subscribe
2008	FRUILMAC	349-1A	2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABLE, MIG D S/N: RANDOMAT-E 2008 · FRUILMAC · 349-1A	🔒 Subscribe
	WOODMIZER	SUPER HYDRAULIC HORIZONTAL BAND MILL	WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH) WOODMIZER · SUPER HYDRAULIC HORIZONTAL BAND MILL	🔒 Subscribe
	NICHOLSON	2075	NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED VIBRATING CONVEYOR (MOTOR MISSING) WITH CHUTE NICHOLSON · 2075	🔒 Subscribe
1995	WEINIG	H-22-A	1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, HOODS, GUARDS, AND ALL STANDARD EQUIPMENT S/N 222-2201, WIRED 440/60/3. 1995 · WEINIG · H-22-A	🔒 Subscribe
	JAMES L. TAYLOR		JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPENING. INCLUDES PIPE WRENCHES. JAMES L. TAYLOR	🔒 Subscribe
	NORTHTECH	NT-24-10 HCRS	NORTHTECH NT-24-10 HCRS PLANER NORTHTECH · NT-24-10 HCRS	🔒 Subscribe
	AURORA		AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH X 48 INCH (2 450 + 4 400) AURORA	🔒 Subscribe
	TOYOTA	FD-30	2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIRES, 24,706 HOURS. NEEDS NEW ENGINE. HAS NOT RUN IN OVER A YEAR. TOYOTA · FD-30	🔒 Subscribe
			SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BELT CONVEYOR, WITH SIX (6) CHAIN INCLINED CONVEYOR, 14-FOOT WIDE X 20-FOOT LONG, FEEDING 12-INCH WIDE X 35-FOOT LONG ROLLER CONVEYOR, WITH BOARD FLIPPER, SINGULATOR, 13-INCH WIDE X 8-FOOT LONG, (3-STOPS) FEEDING OPTIMIZING SAW, INCLUDING TWO POWERED HOLD-DOWNS.	🔒 Subscribe
			MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2 INCH & 4 INCH LONG X 4-KNIFE HEADS, CABINET FULL OF BLADES, PARTS AND MORE.	🔒 Subscribe
	AMERICAN MATERIAL HANDLING		6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN AMERICAN MATERIAL HANDLING	🔒 Subscribe
2001	WEINIG	970070	2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379 2001 · WEINIG · 970070	🔒 Subscribe
	CLUB CAR		CLUB CAR GOLF CART - RUNS CLUB CAR	🔒 Subscribe
	AMERICAN		AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AND CONTROLS AMERICAN	🔒 Subscribe
	AUTOQUIP		AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS AUTOQUIP	🔒 Subscribe
1965	DIEHL	SL-50	1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-DRIVE FEED MOTOR, AUTOMATIC CHAIN OILER, OVERHEAD FEED ROLLS, ADJUSTABLE RIP FENCE, WITH GAUGE. S/N: 65-M-1384689 1965 · DIEHL · SL-50	🔒 Subscribe
	INVICTA	TI-14	INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X 5 INCH CAPACITY, ADJUSTABLE SHAPER FENCE, AND INCLUDING A GRIZZLY 3-ROLL POWER FEEDER WITH FOUR (4) FEED SPEEDS, S/N 1638 INVICTA · TI-14	🔒 Subscribe
	CAT		FORK ATTACHMENT FOR CAT CAT	🔒 Subscribe
	CATERPILLAR		BUCKET ATTACHMENT FOR CAT CATERPILLAR	🔒 Subscribe
1995	WEINIG	934	1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600 1995 · WEINIG · 934	🔒 Subscribe
	MAKITA	5402NA	MAKITA CIRCULAR SAW MODEL 5402NA MAKITA · 5402NA	🔒 Subscribe
			PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, THREE (3) WEED EATERS, EXTRA SAW CHAINS, AND MISC. TOOLS	🔒 Subscribe
			2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET	🔒 Subscribe
2003	SOUTHWORTH		2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL 2003 · SOUTHWORTH	🔒 Subscribe
	REES-MEMPHIS		REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH LONG BAGS REES-MEMPHIS	🔒 Subscribe
	CAMPBELL HAUSFELD		HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK CAMPBELL HAUSFELD	🔒 Subscribe
	CATERPILLAR		RAKE ATTACHMENT FOR CAT CATERPILLAR	🔒 Subscribe
	ROCKWELL		ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WITH CONTROLS, 6 INCH X 50 INCH TILT FENCE S/N: 80177 ROCKWELL	🔒 Subscribe
			3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT	🔒 Subscribe
	ROCKWELL / DELTA	34-390	1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OVERHEAD SAW GUARD, RIP FENCE, 7-1/2HP SAW MOTOR AND CONTROLS S/N: 981-B ROCKWELL / DELTA · 34-390	🔒 Subscribe
	JOHN DEERE	LA145	2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING. JOHN DEERE · LA145	🔒 Subscribe
	DEWALT	12" MITER SAW	12" MITER SAW WITH STAND DEWALT · 12" MITER SAW	🔒 Subscribe
	GRIZZLY		GRIZZLY BELT SANDER GRIZZLY	🔒 Subscribe
	CEMCO	URF-37M	2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDING 40HP CONTACT DRUM ON FIRST HEAD, AND 30HP POLISHING PLATEN ON SECOND HEAD, VARI-DRIVE FEEDWORKS, AMMETERS, AND ALL CONTROLS. CEMCO · URF-37M	🔒 Subscribe
	ROCKWELL	40-C	19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5HP ARBOR MOTOR WITH CONTROLS, SPRING RETURN FOR CARRIAGE ROCKWELL · 40-C	🔒 Subscribe
		212	WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES, SAW GUARD, CLAMP 212	🔒 Subscribe
			MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST	🔒 Subscribe
	DEWALT		DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2) DEWALT	🔒 Subscribe
	DELTA	14"	DELTA 14" FLOOR MODEL BANDSAW DELTA · 14"	🔒 Subscribe
	LOBO	DC-9100	LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72 LONG BAGS LOBO · DC-9100	🔒 Subscribe
	CAT		FORKS ATTACHMENT FOR CAT CAT	🔒 Subscribe
	BEST FLEX		BEST FLEX CONVEYOR BEST FLEX	🔒 Subscribe
	HITACHI	P12R	HITACHI P12R PLANER HITACHI · P12R	🔒 Subscribe
			PERSONEL FORK ATTACHMENT	🔒 Subscribe

Year	Make	Model	Description	Price
2003	MCDONOUGH	V-54	2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, COMPLETE HYDRAULIC SYSTEM, TOOLING, MEADOWS EDGING SYSTEM, GREEN CHAIN AND OUTFEED CONVEYOR. S/N 54EC-1534. WITH EXTRA BLADES.	🔒 Subscribe
	CATERPILLAR	930	2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES AND OPERATES GOOD. THE PUDDLE OF HYDRAULIC FLUID UNDERNEATH THE RIGHT FRONT TIRE, IS A HYDRAULIC LEAK THAT WILL NEED TO BE REPAIRED. S/N 79J6783	🔒 Subscribe
1976	CATERPILLAR	920	1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND OPERATES PER MECHANIC. WORK HORSE. USED TO LOAD ALL LUMBER.	🔒 Subscribe
	BAKER	BT-O	BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLUDES CHUTE TO TURN-AROUND, WITH CANT TURNER, TO 30HP HORIZONTAL RESAW, TO TURN-A-ROUND, MODEL BT-O. BAKER BAND RESAW SYSTEM S/N 98-2534 UNSCRAMBLE S/N 10-130, TURNAROUND S/N'S 98-556 & 98-557	🔒 Subscribe
2003	WINTERSTEIGER	DSG-150 ECO	2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, .3 TO 1.5MM FEED SPEED, 60 TO 150 MAX CUTTING WIDTH USING SIDE GUIDE, INCLUDING TWO SAW FRAMES WITH SAWS. S/N 5852-2003-0375	🔒 Subscribe
	NISSAN	WFO3A35V	NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE, PNEUMATIC TIRES, 15,502 HOURS. MECHANIC GOT IT RUNNING, GOOD TO GO.	🔒 Subscribe
2008	FRUILMAC	349-1A	2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABLE, MIG D S/N: RANDOMAT-E	🔒 Subscribe
	WOODMIZER	SUPER HYDRAULIC HORIZONTAL BAND MILL	WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH)	🔒 Subscribe
	NICHOLSON	2075	NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED VIBRATING CONVEYOR (MOTOR MISSING) WITH CHUTE	🔒 Subscribe
1995	WEINIG	H-22-A	1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, HOODS, GUARDS, AND ALL STANDARD EQUIPMENT S/N 222-2201, WIRED 440/60/3.	🔒 Subscribe
	JAMES L. TAYLOR		JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPENING. INCLUDES PIPE WRENCHES.	🔒 Subscribe
	NORTHTECH	NT-24-10 HCRS	NORTHTECH NT-24-10 HCRS PLANER	🔒 Subscribe
	AURORA		AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH X 48 INCH (2 450 + 4 400)	🔒 Subscribe
	TOYOTA	FD-30	2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIRES, 24,706 HOURS. NEEDS NEW ENGINE. HAS NOT RUN IN OVER A YEAR.	🔒 Subscribe
			SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BELT CONVEYOR, WITH SIX (6) CHAIN INCLINED CONVEYOR, 14-FOOT WIDE X 20-FOOT LONG, FEEDING 12-INCH WIDE X 35-FOOT LONG ROLLER CONVEYOR, WITH BOARD FLIPPER, SINGULATOR, 13-INCH WIDE X 8-FOOT LONG, (3-STOPS) FEEDING OPTIMIZING SAW, INCLUDING TWO POWERED HOLD-DOWNS.	🔒 Subscribe
			MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2 INCH & 4 INCH LONG X 4-KNIFE HEADS, CABINET FULL OF BLADES, PARTS AND MORE.	🔒 Subscribe
	AMERICAN MATERIAL HANDLING		6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN	🔒 Subscribe
2001	WEINIG	970070	2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379	🔒 Subscribe
	CLUB CAR		CLUB CAR GOLF CART - RUNS	🔒 Subscribe
	AMERICAN		AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AND CONTROLS	🔒 Subscribe
	AUTOQUIP		AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS	🔒 Subscribe
1965	DIEHL	SL-50	1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-DRIVE FEED MOTOR, AUTOMATIC CHAIN OILER, OVERHEAD FEED ROLLS, ADJUSTABLE RIP FENCE, WITH GAUGE. S/N: 65-M-1384689	🔒 Subscribe
	INVICTA	TI-14	INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X 5 INCH CAPACITY, ADJUSTABLE SHAPER FENCE, AND INCLUDING A GRIZZLY 3-ROLL POWER FEEDER WITH FOUR (4) FEED SPEEDS, S/N 1638	🔒 Subscribe
	CAT		FORK ATTACHMENT FOR CAT	🔒 Subscribe
	CATERPILLAR		BUCKET ATTACHMENT FOR CAT	🔒 Subscribe
1995	WEINIG	934	1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600	🔒 Subscribe
	MAKITA	5402NA	MAKITA CIRCULAR SAW MODEL 5402NA	🔒 Subscribe
			PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, THREE (3) WEED EATERS, EXTRA SAW CHAINS, AND MISC. TOOLS	🔒 Subscribe
			2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET	🔒 Subscribe
2003	SOUTHWORTH		2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL	🔒 Subscribe
	REES-MEMPHIS		REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH LONG BAGS	🔒 Subscribe
	CAMPBELL HAUSFELD		HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK	🔒 Subscribe
	CATERPILLAR		RAKE ATTACHMENT FOR CAT	🔒 Subscribe
	ROCKWELL		ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WITH CONTROLS, 6 INCH X 50 INCH TILT FENCE S/N: 80177	🔒 Subscribe
			3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT	🔒 Subscribe
	ROCKWELL / DELTA	34-390	1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OVERHEAD SAW GUARD, RIP FENCE, 7-1/2HP SAW MOTOR AND CONTROLS S/N: 981-B	🔒 Subscribe
	JOHN DEERE	LA145	2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING.	🔒 Subscribe
	DEWALT	12" MITER SAW	12" MITER SAW WITH STAND	🔒 Subscribe
	GRIZZLY		GRIZZLY BELT SANDER	🔒 Subscribe
	CEMCO	URF-37M	2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDING 40HP CONTACT DRUM ON FIRST HEAD, AND 30HP POLISHING PLATEN ON SECOND HEAD, VARI-DRIVE FEEDWORKS, AMMETERS, AND ALL CONTROLS.	🔒 Subscribe
	ROCKWELL	40-C	19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5HP ARBOR MOTOR WITH CONTROLS, SPRING RETURN FOR CARRIAGE	🔒 Subscribe
		212	WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES, SAW GUARD, CLAMP	🔒 Subscribe
			MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST	🔒 Subscribe
	DEWALT		DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2)	🔒 Subscribe
	DELTA	14"	DELTA 14" FLOOR MODEL BANDSAW	🔒 Subscribe
	LOBO	DC-9100	LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72 LONG BAGS	🔒 Subscribe
	CAT		FORKS ATTACHMENT FOR CAT	🔒 Subscribe
	BEST FLEX		BEST FLEX CONVEYOR	🔒 Subscribe
	HITACHI	P12R	HITACHI P12R PLANER	🔒 Subscribe
			PERSONEL FORK ATTACHMENT	🔒 Subscribe

2003 MCDONOUGH V-54

2003 MCDONOUGH V-54 54" HEADRIG WITH MEADOWS SAW CARRIAGE, SAW CAB, LOG DECK, HYDRAULIC LOG TURNER, ...

CATERPILLAR 930

2000 CATERPILLAR 930 FRONT END LOADER (WHEEL LOADER) WITH BUCKET. REPLACED BATTERIES. RUNS, DRIVES A...

1976 CATERPILLAR 920

1976 CATERPILLAR 920 FRONT END LOADER, WITH FORKS, (WHEEL LOADER) S/N 7K7070-1357. RUNS, DRIVES, AND...

BAKER BT-O

BAKER BAND RESAW SYSTEM INCLUDING BUS-O UNSCRAMBLE, HAUL-UP CHAINS, AND FEED TO CROSSFEED BELT INCLU...

2003 WINTERSTEIGER DSG-150 ECO

2003 WINTERSTEIGER DSG-150 ECO FRAME SAW - WITH 11KW MAIN DRIVE MOTOR, 30 TO 200 MM CUTTING HEIGHT, ...

NISSAN WFO3A35V

NISSAN TYPE 80 8,000LB FORKLIFT, MODEL WFO3A35V, DOUBLE MAST, 48 INCH FORKS, SIDE SHIFT, GAS ENGINE,...

2008 FRUILMAC 349-1A

2008 FRUILMAC 349-1A END MATCHER - WITH 10' INFEED, 12" X 13' OUTFEED BELT, PLUS 30" SKATEWHEEL TABL...

WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL

WOODMIZER SUPER HYDRAULIC HORIZONTAL BAND MILL WITH IN-FEED CARRIAGE AND 30HP DRIVE SYSTEM (ROUGH)...

NICHOLSON 2075

NICHOLSON 2075 60-INCH CHIPPER (ORANGE) WITH 150HP DRIVE, INCLUDING 18-INCH X 60-INCH LONG IN-FEED V...

1995 WEINIG H-22-A

1995 WEINIG H-22-A 5-HEAD, 5 INCH X 9-1/2 INCH FEED THROUGH MOULDER WITH 8 FOOT LONG INFEED TABLE, H...

JAMES L. TAYLOR

JAMES L. TAYLOR 12' LONG CLAMP RACK (TREAD CLAMP) - WITH FLOOR STAND AND 31 CLAMPS, 3-1/2" X 32" OPE...

NORTHTECH NT-24-10 HCRS

NORTHTECH NT-24-10 HCRS PLANER...

AURORA

AURORA DUMP HOPPERS - INCLUDING ONE (1) 60 INCH X 60 INCH X 60 INCH, AND FOUR (4) 48 INCH X 48 INCH ...

TOYOTA FD-30

2000 TOYOTA FD-30 FORK LIFT - DOUBLE MAST, SIDE SHIFT, GAS ENGINE, 48 INCH LONG FORKS, PNEUMATIC TIR...

SET OF CONVEYORS, FROM MOULDER, TO OPTIMIZING SAW: - 16-INCH WIDE X 22-FOOT LONG POWERED OUTFEED BEL

MISC. TOOLS, PLANER, CUTTER HEADS (@ 25) AND KNIVES FOR MOULDER, (28) 9 INCH LONG X 4-KNIVE HEADS, 2

AMERICAN MATERIAL HANDLING

6' WIDE X 14' LONG, 7-BELT MOULDER INFEED TABLE - HYDRAULICALLY DRIVEN...

2001 WEINIG 970070

2001 WEINIG OPTI-SCAN MODEL 970070 S/N 93379...

CLUB CAR

CLUB CAR GOLF CART - RUNS...

AMERICAN

AMERICAN 12' LONG X 14' WIDE INFEED HAUL-UP CHAINS - WITH SIX POWERED CHAINS, 3HP VARI-DRIVE UNIT AN...

AUTOQUIP

AUTOQUIP HYDRAULIC SCISSOR LIFT TABLE WITH 4' X 12' PLATFORM, INCLUDING FOUR ROLLER BEDS...

1965 DIEHL SL-50

1965 DIEHL SL-50 STRAIGHT LINE, GLUE JOINT RIP SAW - WITH 15HP DMD ARBOR MOTOR, SEPARATE 2 HP VARI-D...

INVICTA TI-14

INVICTA MODEL TI-14 SPINDLE SHAPER - WITH 7-1/2HP DRIVE MOTOR, FOUR SPEED SPINDLE, 1-1/4 INCH DIA. X...

CAT

FORK ATTACHMENT FOR CAT...

CATERPILLAR

BUCKET ATTACHMENT FOR CAT...

1995 WEINIG 934

1995 WEINIG MODEL 934 PROFILE KNIFE GRINDER - 10 INCH CAP, 230 VOLT, RANDOMAT 934 S/N 934/600...

MAKITA 5402NA

MAKITA CIRCULAR SAW MODEL 5402NA...

PORTABLE TOOL ROOM AND ITEMS BELOW STAIRS WITH FOUR (4) STIHL CHAIN SAWS, TWO (2) SAW SHARPENERS, TH

2 STORAGE ROOMS, ROLLING CARTS, WORK TABLES, AND FLAMMABLES STORAGE CABINET

2003 SOUTHWORTH

2003 SOUTHWORTH HYDRAULIC SCISSOR LIFT WITH 4' X 8' PLATFORM, 4,000 LB CAPACITY, FOOT CONTROL...

REES-MEMPHIS

REES-MEMPHIS THREE (3) BAG RECIRCULATING TYPE DUST COLLECTOR, WITH 7-1/2HP DRIVE MOTOR, AND 72 INCH ...

CAMPBELL HAUSFELD

HORIZONTAL AIR COMPRESSOR - WITH 10HP MOTOR AND CONTROLS, 120 GALLON TANK...

CATERPILLAR

RAKE ATTACHMENT FOR CAT...

ROCKWELL

ROCKWELL 12 INCH HAND JOINTER WITH CUTTERHEAD GUARD, 12 INCH X 84 INCH JOINTER TABLE, 3HP DRIVE, WIT...

3 SETS CANTILEVER SHELVING WITH WOOD INVENTORY ON IT

ROCKWELL / DELTA 34-390

1998 ROCKWELL / DELTA 34-390 12-INCH - 14-INCH TILTING ARBOR TABLE SAW WITH BEISEMEIER SAW FENCE, OV...

JOHN DEERE LA145

2010 JOHN DEERE LA145 RIDING LAWN MOWER - WITH BATTERY CHARGER. NOT RUNNING....

DEWALT 12" MITER SAW

12" MITER SAW WITH STAND...

GRIZZLY

GRIZZLY BELT SANDER...

CEMCO URF-37M

2000 CEMCO URF-37M TWO HEAD WIDE BELT SANDER & INVENTORY OF BELTS - WITH 36 INCH MAX. WIDTH, INCLUDI...

ROCKWELL 40-C

19XX ROCKWELL MODEL 40-C RADIAL ARM SAW - WITH 17 INCH MAX. RIP CAPACITY, 14 INCH DIA. BLADE CAP., 5...

212

WHIRLWIND MODEL 212 LEFT HAND CUT-OFF SAW - 10HP DRIVE MOTOR, INCL 10' INFEED AND 8' OUTFEED TABLES,...

MOTOR, TOOLS, WORK TABLES, ROLLING TOOL CHEST

DEWALT

DEWALT 12-INCH MITER SAWS, WITH STAND, QUANTITY OF TWO (2)...

DELTA 14"

DELTA 14" FLOOR MODEL BANDSAW...

LOBO DC-9100

LOBO DC-9100 FOUR (4) BAG, RECIRCULATING TYPE DUST COLLECTOR, WITH 10HP DRIVE MOTOR AND CONTROLS, 72...

CAT

FORKS ATTACHMENT FOR CAT...

BEST FLEX

BEST FLEX CONVEYOR...

HITACHI P12R

HITACHI P12R PLANER...

PERSONEL FORK ATTACHMENT

1 2 Next >>

Recent Searches

Login

Reset Password

Lumber Mill Equipment Auction Online Only Auction

Save to Project Folder

Print Options

Unlock Unlimited Printing