Meloche Windows Surplus to the Ongoing Operations

GED MHM03500416R 84"W DUAL-ZONE OVEN / ROLL PRESS LINE S/N: 9536, MIN UNIT SIZE 12" X 12" RUNNING STRAIGHT & 9" X 9" RUNNING DIAGONALLY, MAX UNIT SIZE 84" X 120", UNIT THICKNESS 3/8" - 2", AUTO OPERATION, CS-DS-E 84"W X 4.5"L X 34" - 38"H MOTORIZED SKATE WHEEL INFEED CONVEYOR W/ 4"DIA. WHEELS ON 6" CENTERS, 4.5"L DUAL-ZONE HEATING OVEN, CAN RUN GREATER OR EQUAL TO 42"W IGUS W/ SINGLE-ZONE WITH OPERATING TEMPERATURE 650-950 DEGREES F, LINE SPEEDS 3 - 35 FPM, EACH ZONE W/ PLC CONTROLLED AUTO IDLE STANDBY MODE, (3) EMITTER BANKS W/ TOTAL OF (16) EMITTERS, WATLOW LED TOUCHPAD TEMPERATURE CONTROLLER, 2"L ROLL PRESS W/ (3) TOP & (3) BOTTOM 6"DIA/ X 88" RUBBER ROLLS, VARIABLE SPEED, MOTORIZED ROLL HEIGHT ADJUSTMENT, LED DISPLAY, 2HP MOTOR, CS-DS-E 84"W X 6.5"L X 34" - 38"H MOTORIZED SKATE WHEEL OUTFEED CONVEYOR, 4"DIA. WHEELS ON 6" CENTERS, 84"W X 4"L BALL TRANSFER OUTFEED CONVEYOR W/ 1.5"DIA. BALLS ON 6" CENTERS, APPROX. 275"L X 125"W X 67"H AND 11,000LBS

2011 BILLCO CNC 2200 108" X 144" GLASS OPTIMIZATION CUTTING MACHINE W/ EDGE DELETION, Z-95" Z-AXIS - 2011 BILLCO CNC 2200 108" X 144" GLASS OPTIMIZATION CUTTING MACHINE W/ EDGE DELETION, Z-95 Z-AXIS CUTTING HEAD AND AUTOMATIC CUTTING WHEEL CHANGING, S/N 38672-01A, MAX GLASS SIZE 108 X 144, MIN GLASS SIZE 48 X 60, GLASS THICKNESS 0.09 0.75, AIR FLOTATION TABLE SIZE 110 X 168 X 36H, DENSE WOVEN BLACK FELT SURFACE, (3) LEFT & (3) RIGHT 5/8W RECESSED FEED CHAINS ON 15 CENTERS, BRIDGE TRAVEL 162, MAX CUTTING SPEED 4,500 IPM, CUT TOLERANCE +/- 0.015, DELETION SPEED 4,000 IPM, AUTO EDGE DETECTION & EDGE DELETION, FRONT LOCATING STOPS, Z-95 SUPER HEAD 360 DEGREE SERVO-CONTROLLED ROTARY CUTTING HEAD W/ SERVO-CONTROLLER Z-AXIS FOR AUTOMATIC GLASS THICKNESS AND WHEEL DIA. ADJUSTMENT, PNEUMATIC CUTTING PRESSURE ADJUSTMENT, PRESSURIZED LUBRICATION SYSTEM, ADVANCED CUTTING WHEEL GUIDANCE, AUTO CUTTING WHEEL CHANGING W/ (6) SPARE CUTTING WHEEL STATIONS, MAINTENANCE FREE AC DIGITAL MOTORS, HIGH RES / HIGH TORQUE DIGITAL STEP & DIRECTION SERVO MOTORS, RACK & PINION BRIDGE AND HEAD TRAVELS, ALUMINUM ALLOY BRIDGE, CNC CONTROL CONSOLE W/ (2) 17 DISPLAYERS, BILLCO BUTLER OPERATING INTERFACE SOFTWARE, HP3 BATCHBAN OPTIMIZATION SOFTWARE (FULL VERSION), SUPPORTS MOTION CONTROL (G-CODE) & MACHINE CONTROL (LADDER LOGIC PROGRAMS) AND REMOTE DIAGNOSTICS, OPERATING & MAINTENANCE MANUAL, MECHANICAL & ELECTRICAL DRAWINGS, SPARE PARTS LIST, TRANSFORMER, DIMENSIONS OF GLASS CUTTING MACHINE 202L X 170W X 63H, DIMENSIONS OF CONTROL CONSOLE 48L X 36W X 63H, DIMENSIONS OF ELECTRICAL CABINET 45L X 20W X 84H

2000 BILLCO WORKHORSE II 684-8 84"W 8-BURHS FLIP-TOP FLAT GLASS WASHING & DRYING MACHINE S/N: W099180, MAX GLASS WIDTH 84, MIN GLASS LENGTH 14.5 DIAGONAL, GLASS THICKNESS 1/16 14, 13 36 FPM, 49-1/2L LOADING SECTION W/ MOTORIZED DONUT ROLL CONVEYOR, 40L DETERGENT WASHING SECTION W/ (2) PAIR OF 8DIA. X 85W LOW-E BRISTLE BRUSHES W/ 3HP TEFC BRUSH MOTOR & 80-GAL CAP. WATER HOLDING TANK, (2) 20KW HEATERS, OMEGA CN76000 LED TOUCHPAD TEMPERATURE CONTROLLER, 0.5HP PUMP, 40L RINSE / FINAL RINSE SECTION W/ (2) PAIR OF 8DIA. X 85W LOW-E BRISTLE BRUSHES W/ 3HP TEFC BRUSH MOTOR, 40-GAL CAP. WATER HOLDING TANK, 1HP PUMP, 38L DRYING SECTION W/ 20HP TEFC BLOWER & SOUND BAFFLING SYSTEM W/ (2) AIR KNIVES, 49.5L UNLOADING SECTION W/ MOTORIZED DONUT ROLL CONVEYOR, DETERGENT WASHING & RINSE / FINAL RINSE SECTIONS W/ FLIP-TOP MANUAL HYDRAULIC LIFT, SPRAY SYSTEM W/ (2) COPPER SPRAY LINES PER BRUSH, (2) STAINLESS STEEL SPRAY LINES PER BRUSH (FINAL RINSE), LINE STRAINERS & AUTO WATER SAVER (FINAL RINSE), 84W X 35.5H MOTORIZED DONUT ROLL CONVEYOR W/ 3DIA. ROLLS ON 7 CENTERS & 1HP TEFC MOTOR, APPROX. 240L X 140W X 100H AND 10,000LBS

UNIVAL 520 L DUAL-HEAD VINYL WELDING MACHINE, 81" HEAD TRAVEL, FIXED LEFT & MOVABLE RIGHT HEADS, (4) OMRON TEMPERATURE CONTROLLERS, (2) E5ES LED W/ TOUCHPAD & (2) E5C2 ANALOG W/ DIAL, TRANSFORMER

2010 BILLCO TITAN 500 AT-500S GALLONS / DAY RO REVERSE OSMOSIS WATER TREATMENT SYSTEM, S/N 88642, 150 PSI, 110/220V, 50/60 CY, 1 PH, (2) 2.5 X 21 MEMBRANE ELEMENTS, 5-MICRON SEDIMENT & 10-MICRON CARBON BLOCK CHLORINE 4.5 X 10 PRE-FILTERS, 1/3HP 150 PSI PUMP, LOW PRESSURE SWITCH, 120-GAL CAP. VERTICAL POLYETHYLENE WATER STORAGE TANK APPROX. 30DIA. X 47H W/ 24STEEL STAND

REX MANUFACTURING 118KVA & 93KVA TRANSFORMERS, 600V TO 480Y/277V

LINCOLN RF66KB361 14" VERTICAL CONTOUR METAL CUTTING BAND SAW, 16" X 19.75" X 38"H TABLE TILE 15 - LINCOLN RF66KB361 14" VERTICAL CONTOUR METAL CUTTING BAND SAW, 16" X 19.75" X 38"H TABLE TILE 15 DEGREE LEFT & RIGHT, MAX HEIGHT UNDER GUARD 8", WHEEL DIA. 14", BLADE SIZE 5/8W X 113L, VARIABLE BLADE SPEEDS 30 - 90 MPM, BLADE SHEAR, BLADE WELDER / GRINDER, WORK LIGHT, S/N: B361329

ZEKS HEATSINK 35HSEA100 35 CFM CYCLING REFRIGERATED COMPRESSED AIR DRYER, R-22, 1/3HP COMPRESSOR MOTOR, 1/15HP FAN MOTOR, S/N 244975

CRAFTSMAN 113.278570C 10" RADIAL ARM SAW, 28" X 44" X 37"H TABLE SIZE, RIP CA. 1.5" - 17.5" IN / 10.5" - 27.5" OUT, 3,450 RPM, LCD MITER / BEVEL / ELEVATION / RIP DISPLAY, 2-DOOR CABINET, S/N 88356M0067 (NOTE: MACHINE HAS BEEN PROFESSIONALLY DISCONNECTED)

SAMPSON MN 14 14 DOUBLE MITER SAW, 5.75" X 31.5" X 35"H TABLE SIZE, CUTTING CAP. 7"H X 1"W AT MAX - SAMPSON MN 14 14 DOUBLE MITER SAW, 5.75 X 31.5 X 35H TABLE SIZE, CUTTING CAP. 7H X 1W AT MAX HEIGHT & 3.75W X 3H AT MAX WIDTH, CUTTING ACCURACY +/- 0.005, +/- MIN ARC, ARBOR DIA. 5/8, BLADE SPEED 12,000 SFM, CYCLE TIME 3 SEC, PNEUMATIC BLADE ACTUATION W/ FOOT PEDAL, (2) 1.5HP, 3,450 RPM MOTORS, (2) 36L X 3.75H FENCE, S/N 89049

SAMPSON MN 12 12 DOUBLE MITER SAW, 5.75" X 31.5" X 35"H TABLE SIZE, CUTTING CAP. 5.5"H X 1"W AT MAX - SAMPSON MN 12 12 DOUBLE MITER SAW, 5.75 X 31.5 X 35H TABLE SIZE, CUTTING CAP. 5.5H X 1W AT MAX HEIGHT & 3.75W X 2.5H AT MAX WIDTH, CUTTING ACCURACY +/- 0.005, +/- MIN ARC, ARBOR DIA. 5/8, BLADE SPEED 11,000 SFM, CYCLE TIME 3 SEC, PNEUMATIC BLADE ACTUATION W/ FOOT PEDAL, (2) 1.5HP, 3,425 RPM MOTORS, (2) 32.75 X 2.25 FENCE, S/N 89048 (NOTE: MACHINE HAS BEEN PROFESSIONALLY DISCONNECTED)

GARRETT TOOLING PNEUMATIC DOOR FRAME MACHINE, 42" X 84" CAP., WORKING HEIGHT 38", (6) 3"DIA. PNEUMATIC CLAMPS, (2) FOR LEFT JAMB, (2) FOR RIGHT JAMB, (2) FOR HEADER, MANUAL RACK & PINION WIDTH ADJUSTMENT

WOOD'S POWR-GRIP MANUAL LADDER LIFT SYSTEM

DELTA HOMECRAFT 18" BENCH-TOP DRILL PRESS, 8" X 8" TABLE SIZE, 8" LR X 6.25" FB BASE SIZE, QUILL TRAVEL 3-1/2, S/N: BM9838

LETARTE ECON-O-MITRE EM 11 B 11 DOUBLE MITER SAW, CUTTING CAP. 3" X 3", TABLE HEIGHT 35", PNEUMATIC BLADE ACTUATION, FOOT PEDAL CONTROL, S/N 473284 (NOTE: MISSING 1 MOTOR) (NOTE: MACHINE HAS BEEN PROFESSIONALLY DISCONNECTED)

DELTA 10 10 RADIAL ARM SAW, BLADE SIZE 20" X 30" X 4.75"H, RIP CAP. 0-14" IN / 12" - 24" OUT, BLADE BEVEL ANGLE 90 DEGREE LEFT & RIGHT, RADIAL ARM SWING RANGE 45 DEGREE LEFT & RIGHT, 3,450 RPM, 30 X 42 X 33H STEEL FRAME STAND, 3/4" THICK PLYWOOD TOP (NOTE: MACHINE HAS BEEN PROFESSIONALLY DISCONNECTED)

ITW RANSBURG AQUATANK ELECTROSTATIC WATERBASE PAINT FINISHING SYSTEM, 5-GAL CAP. 21" DIA. X 32" H. VOLTAGE ISOLATION TANK, 55-PSI, 75786 SPRAY GUN W/ MAX PAINT PRESSURE 100 PSI & HOSE, 76580-61001 40W CONTROL UNIT / POWER SUPPLY, OUTPUT VOLTAGE 0-10V, OUTPUT CURRENT 1/2A, 9040 CASCADE LOW VOLTAGE MODULE, S/N: 241111

LOT OF (6) 10L CAP. PRESSURE POTS, 80-PSI, (2) SPRAY GUNS, (2) REGULATORS & HOSES

GENIE GTH-644 TELEHANDLER / TELESCOPIC FORKLIFT S/N: GTH0606A-9781, APPROX. 5,261HRS

GIOVANNI APB COPY S SINGLE-HEAD COPY ROUTER, 9.5" X 21.75" X 33.5"H TABLE SIZE, 1HP MOTOR, (2) HORIZONTAL PNEUMATIC CLAMPS, 48L X 3H FENCE, S/N 0663/89001

GIOVANNI APB COPY S SINGLE-HEAD COPY ROUTER, 9.5" X 21.75" X 33.5"H TABLE SIZE, 1HP MOTOR, (2) - GIOVANNI / APB COPY S SINGLE-HEAD COPY ROUTER, 9.5" X 21.75" X 33.5"H TABLE SIZE, 1HP MOTOR, (2) HORIZONTAL PNEUMATIC CLAMPS, 48L X 3H FENCE, S/N 0275/6319

ELU MGS 72 300MM (11.81") BENCH-TOP MITER SAW, 11" X 25" X 4.75"H TABLE SIZE, 1,450W - 3,800 RPM - ELU MGS 72 300MM (11.81) BENCH-TOP MITER SAW, 11 X 25 X 4.75H TABLE SIZE, 1,450W 3,800 RPM MOTOR, 27 X 24 X 27.5H STEEL STAND, 5/8 THICK PLYWOOD TOP, S/N 3856

ELU MGS 72 300MM (11.81") BENCH-TOP MITER SAW W/ CABINET BASE, 11" X 25" X 37"H TABLE SIZE, 3,400 RPM MOTOR, 100L CAP. X 2.25W X 1.5H MANUAL STOP, 18L X 3W X 1.5H OUTFEED FENCE, S/N 181019

KEAR FABRICATION K-05A 72"W X 10"D X 60"H DOUBLE-SIDED A-FRAME FLAT GLASS DOLLY, (2) SWIVEL & (2) FIXED 8DIA. X 2.5W PHENOLIC CASTERS, SCREW-TYPE FLOOR LOCK, (2) SAFETY BARS, RUBBER CONTACT SURFACES

BILLCO CASTER-TYPE TRANSFER TABLE, 2.5' X 7' X 3'H TRACK-MOUNTED, S/N: W0-85114-4, DIMENSIONS 84 X 32 X 36H; BILLCO CASTER-TYPE TRANSFER TABLE, 2.5 X 4 X 3H, S/N: N/A, DIMENSIONS 48 X 30 X 36H; BILLCO CASTER-TYPE TRANSFER TABLE, 4 X 4 X 3H PNEUMATIC, S/N: W0-85114-1 W/ 8DIA. SUCTION CUP, DIMENSIONS 50 X 50 X 36; ALL TRANSFER TABLES W/ 34W X 2DIA. SWIVEL CASTERS ON 6 CENTERS

ROLLTECH INDUSTRIES MCT 912-A-2BB 9' X 12' X 36"H SINGLE-AXIS AIR FLOATATION BREAKOUT TABLE, OVERALL TABLE SIZE 109 X 145 X 36H, MAX GLASS SIZE 108 X 144, 38.5, 32, 38.5 BREAKOUT SECTIONS, (2) TABLE LENGTH PNEUMATIC BREAKER BARS, CONTROLS ON TABLE END, DAYTON 4C329 4HP, 3,450 RPM TEFC DIRECT DRIVE BLOWER W/ START/STOP BUTTON CONTROL STATIONS ON (3) SIDES, (4) SCREW-TYPE ADJUSTABLE FEET

GED M813-0310 42"W X 20'L OVERHEAD SPACER FRAME HANGING CONVEYOR, TRANSPORTS COMPLETED FRAMES FROM EXTRUDER TO TRANSFER TABLES BETWEEN WASHER & OVEN / ROLL PRESS LINE, (3) FEED CHAINS ON 15 CENTERS W/ HOOKS ON 5 CENTERS, 7.5 FPM CONVEYOR SPEED, ON/OFF PHOTO SENSORS AUTOMATICALLY ADVANCE CONVEYOR WHEN FRAMES ARE REMOVED, APPROX. 262L X 96W X 36H

GED MHMP41042DE 42:1 RATIO 55-GAL DRUM-TYPE HOT MELT SEALANT / DESICCANT PUMP, 22"DIA. X 35"H DRUM - GED MHMP41042DE 42:1 RATIO 55-GAL DRUM-TYPE HOT MELT SEALANT / DESICCANT PUMP, 22"DIA. X 35"H DRUM SIZE, HEAVY DUTY DUAL ELEVATORS, INSULATED MATERIAL HOSES

GED MHMP41042DE 42:1 RATIO 55-GAL DRUM-TYPE HOT MELT SEALANT / DESICCANT PUMP, 22"DIA. X 35"H DRUM

2010 GED MSMEXT410000E SMART LINEAR CO-EXTRUDER S/N: 13544, LINEARSKIP OR LINEARU EXTRUSION, MIN FRAME LENGTH 6 X 6, MAX FRAME LENGTH UNLIMITED, SPACER WIDTH 7/32 7/8, LINE SPEED 80 94 FPM, SEALANT & MATRIX THICKNESS APPLICATION ACCURACY +/- 0.002, SEALANT START/STOP ACCURACY +/- 0.050, AUTO OR SEMI-AUTO OPERATION, EXPANDABLE DESICCANT MATRIX APPLICATION W/ AUTOMATIC SERVO POSITION CONTROLLED CONVEYOR WIDTH ADJUSTMENT & APPLICATION HEADS, QUICK-RELEASE HOLD-DOWN WHEELS, PRECISION POSITIVE DISPLACEMENT GEAR PUMPS, ENCODER-BASED DISPENSING FOR STARTS/STOPS/SKIPS, 1-1/16W X 6L INFEED & OUTFEED BELT CONVEYORS, PC BASED CONTROL W/ PRO-FACE 15 LCD TOUCHSCREEN DISPLAY, WINEXTRUDE SOFTWARE, TEMPERATURE SETTINGS, CALIBRATION WIZARD FOR CUSTOMIZED SETUPS & REMOTE DIAGNOSTICS, APPROX. 152L X 48W X 76H AND 2,900LBS

1998 GED MIS24001200411E GENERATION 2 "INTERCEPT ULTRA" IGU INSULATED GLASS SPACER FRAME BUILDING MACHINE S/N 234, ULTRA CONVERSION UPGRADE IN 2010 TO RUN 0.0077 THICKNESS STAINLESS STEEL, PRODUCTION RATE; (3,000) 24 X 36 FRAMES (NO MUNTIN) PER 8HR SHIFT, MIN FRAME LENGTH 6 X 6, MAX FRAME LENGTH 21.5 (BASED ON 20L TRANSFER CONVEYORS EQUIVALENT OF 36 X 84 PATIO DOOR OR 50 X 70 PICTURE UNIT), SPACER WIDTH 7/32 7/8, FRAME HEIGHT 0.300 (+/- 0.005), SCREW SIZE #8-32, LINE SPEEDS 1-8 FRAMES/MIN (24 X 36 FRAME NO MUNTIN), AUTO OR SEMI-AUTO OPERATION, AUTO WIDTH ADJUSTMENT, AUTO MUNTIN LOCATION NOTCHING, AUTO GAS HOLE PUNCHING OF SPACERS FOR SINGLE OR DUAL-HOLE, AUTO REMAKE CAPABILITY, CONTROL SOLE W/ PC-BASED CONTROL, MONITOR, ALLEN BRADLEY 1394 DIGITAL SERVO MOTION CONTROLLER, VARIABLE SPEED AMPLIFIER DRIVES, WINFRAME II SOFTWARE, 36 DIA. DUAL-REEL PORTABLE MOTORIZED UNCOILER W/ (2) ROTATING SPOOLS EACH 0.5HP, LASER MEASURING/LINEAR BEARING LOOP CONTROL UNIT W/ 125249 ULTRASONIC SENSOR, ULTRA CONVERSION FEEDER PRESS/PUNCH STATION, S/N 1342, ULTRA CONVERSION ROLL FORMER, S/N 1342 W/ (8) TOP HORIZONTAL, (9) BOTTOM HORIZONTAL & (1) VERTICAL PAIRS OF ROLLS & LED DISPLAY, CORNER CRIMPER W/ LED DISPLAY, 1-3/8W X 20L BELT TRANSFER CONVEYOR W/ 0.5HP MOTOR, OVERALL DIMENSIONS APPROX. 524L X 116W X 86H AND 6,250LBS

1998 BILLCO GED INTERCEPT COMPLETE HORIZONTAL INSULATED GLASS MANUFACTURING LINE