Canoo Day 2 Former Assets of Oklahoma City Premiere EV Manufacturer EV Skateboard Production Line Plant Support Shot Blast and Much More
Category: MISC
Total Lots:
492
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2019 | FANUC | R-2000IC 210F |
2019 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 210 KG. MASS: 1090 KG. SERIAL NUMBER: R19Z008BB. CONTROLLER SERIAL NUMBER: E19Z30871. INCLUDES I PENDANT. ROBOT BASE INCLUDED. SIX ARTICULATED AXES. SPOT WELDING TORCH NOT INCLUDED.
|
🔒 Subscribe |
|
|
2022 | EATON | MAGNUM DS T5C |
2022 EATON MAGNUM DS T5C SWITCHGEAR MODULE. LOW-VOLTAGE SWITCHGEAR SYSTEM, TIE T5C MODULE, 3200A BUS RATING, 3 POLE, 3000A TRIP SETTING. PRIMARY FUNCTION: INTERCONNECTION AND LOAD DISTRIBUTION WITHIN LOW-VOLTAGE SWITCHGEAR NETWORKS. CURRENT CAPACITY: 3200A BUS WITH 3000A TRIP COORDINATION. APPLICATION: INDUSTRIAL POWER MANAGEMENT AND CIRCUIT PROTECTION. CONSTRUCTION: THREE-POLE ARCHITECTURE FOR THREE-PHASE SYSTEMS.
|
🔒 Subscribe |
|
|
2020 | FANUC | R-2000IC 210F |
2020 FANUC R-2000IC 210F SIX-AXIS COLLABORATIVE ROBOTIC SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 210 KG. ROBOT MASS: 1,090 KG. SERIAL NUMBER (ROBOT): R2X0X007EF. SERIAL NUMBER (CONTROLLER): E20932954. PENDANT: I-TYPE INCLUDED. INCLUDES CANOO CLAMP MECHANISM WITH INTEGRATED SMC PNEUMATIC CONTROLS FOR AUTOMATED CAP TRANSFER AND PLACEMENT. BASE FRAME INCLUDED. ASSETBUILT.
|
🔒 Subscribe |
|
|
2020 | FANUC | R-2000IC 210F |
2020 FANUC R-2000IC 210F 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 210KG. MASS: 1,090KG. SERIAL NUMBER (ROBOT): R20Y008A5. CONTROLLER SERIAL NUMBER: E20X33711. INCLUDES I PENDANT AND MOUNTING BASE. TUCKER TH 510 DUAL STUD WELDERS NOT INCLUDED WITH THIS LOT.
|
🔒 Subscribe |
|
|
2019 | FANUC | R-2000IC 210F |
2019 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOT SYSTEM. PAYLOAD CAPACITY: 210 KG. MASS: 1090 KG. CONTROLLER: R30IB PLUS. PENDANT: I PENDANT INCLUDED. APPLICATION: CENTERLINE SPOT WELDING CAPABLE (WELDING EQUIPMENT NOT SUPPLIED). MOUNTED ON PROVIDED BASE. S/N: R19Z008DC
|
🔒 Subscribe |
|
|
2021 | FANUC | M-900IB/360 |
2021 FANUC M-900IB/360 ROBOTIC SYSTEM, 6-AXIS CONFIGURATION ROBOT UNIT. PAYLOAD CAPACITY: 360 KG. MASS: 1540 KG. MOUNTING: BASE INCLUDED. CONTROLLER: R30IB PLUS SYSTEM. SERIAL NUMBER: E20Z12871. INTERFACE: I PENDANT (INCLUDED). INTEGRATED TOOLING: CANOO CENTERLINE SPOT WELDING/MATERIAL HANDLING ATTACHMENT. CANOO ID: 020-R06. STATUS: NOT INCLUDED WITH SYSTEM. CONFIGURATION CELL 15. COMPLETE ROBOTIC PLATFORM. READY FOR INTEGRATION. S/N: R21120721
|
🔒 Subscribe |
|
|
2021 | FANUC | M-900IB/360 |
2021 FANUC M-900IB/360 ROBOTIC SYSTEM, 6-AXIS CONFIGURATION. PAYLOAD CAPACITY: 360 KG. MASS: 1540 KG. CONTROLLER: R30IB PLUS SYSTEM. INCLUDES I PENDANT. PRIMARY APPLICATION: SPOT WELDING, MATERIAL HANDLING OPERATIONS. S/N: R21120723
|
🔒 Subscribe |
|
|
2020 | FANUC | R-2000IC 210F |
2020 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOTIC ARM PAYLOAD CAPACITY: 210KG REACH: 1090MM CONTROLLER: R30IB PLUS SYSTEM WITH I-SERIES PENDANT ROBOT SERIAL NUMBER: R20X007F0 CONTROLLER SERIAL NUMBER: E20932955 INTEGRATED AUTOMATION PACKAGE PROPRIETARY CANOO CAP TRANSFER MECHANISM [MODEL 030L R01] SMC PNEUMATIC CONTROL INTEGRATION FOR AUTONOMOUS LOADING/UNLOADING PRECISION CLAMPING ASSEMBLY FOR HIGH-VOLUME PRODUCTION MOUNTED BASE STRUCTURE INCLUDED FULL R30IB PLUS PROGRAMMING ARCHITECTURE THIS 2020-ERA WORKHORSE DELIVERS REPEATABLE PRECISION ACROSS MATERIAL HANDLING, ASSEMBLY, AND TRANSFER OPERATIONS. THE FACTORY-INTEGRATED CANOO CLAMP SYSTEM ELIMINATES MANUAL INTERVENTION WHILE MAINTAINING TIGHT TOLERANCES. COMPLETE WITH CONTROLLER, TEACH PENDANT, AND INSTALLATION BASEREADY FOR IMMEDIATE DEPLOYMENT IN PRODUCTION ENVIRONMENTS.
|
🔒 Subscribe |
|
|
2020 | FANUC | R-2000IC 210F |
2020 FANUC R-2000IC 210F 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. INDUSTRIAL 6-AXIS CONFIGURATION. MASS CAPACITY: 1090 KG. AXIS CONFIGURATION: 6-AXIS ARTICULATED ARM. CONTROLLER: R30IB PLUS. PENDANT: I-TYPE INCLUDED. INTEGRATED BASE STRUCTURE. LMI LASER SCANNER MOUNTING BRACKET PRESENT. COMPLETE SYSTEM READY FOR COMMISSIONING. ALL DOCUMENTATION AND INTERFACE HARDWARE INCLUDED. S/N: R20Y00BA3
|
🔒 Subscribe |
|
|
2020 | FANUC | M-900IB/360 |
2020 FANUC M-900IB/360 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SERIAL NUMBER: R203202B8. PAYLOAD CAPACITY: 1540KG. CONTROL ARCHITECTURE: FANUC SYSTEM R30IB PLUS CONTROL; INTERFACE R30IB PLUS CONTROLLER | S/N E20310194. INTEGRATED I PENDANT. FULL SYSTEM PROGRAMMING CAPABILITY. MATERIAL HANDLING CONFIGURATION CUSTOM CANOO ATTACHMENT ASSEMBLY. CANOO ID: 160-R01. PROGRAMMABLE DESTACO ACTUATORS. (2) SMC PNEUMATIC DRIVES | INTEGRATED. ROBOT BASE MOUNTING PLATE INCLUDED. COMPLETE SYSTEM READY FOR INTEGRATION.
|
🔒 Subscribe |
|
|
2019 | FANUC | R-2000IC 210F |
2019 FANUC R-2000IC 210F 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SIX-AXIS ROBOTIC ARM ASSEMBLY. PAYLOAD CAPACITY: 210 KG. MASS: 1090 KG. ARTICULATION: FULL 6-AXIS MOTION PLATFORM. BASE MOUNT: INCLUDED. INCLUDES R30IB PLUS CONTROLLER UNIT, TEACH PENDANT (I-TYPE), INTEGRATED ROBOT BASE STRUCTURE, COMPLETE CABLING AND CONNECTORS. CENTERLINE SPOT WELDING CAPABILITY AVAILABLE. S/N: R19Y00658A
|
🔒 Subscribe |
|
|
2019 | FANUC | ARCMATE 120ID |
2019 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING SYSTEM. PAYLOAD CAPACITY: 250KG. PRIMARY APPLICATION: MIG WELDING OPERATIONS. INTEGRATED WELDING PACKAGE: FRONIUS TPS400I MIG WELDER | S/N 32309439, WF 25I R PAP WIRE FEEDER, WELDING HEAD ASSEMBLY. CONTROLLER: FANUC SYSTEM R-30IB PLUS | S/N E19Z10574, TEACH PENDANT. CABLE MANAGEMENT: IGUS TRIFLEX R SERIES TRE CABLE CARRIER SYSTEM. S/N R19Z206B0
|
🔒 Subscribe |
|
|
2022 | EATON | MAGNUM DS T5C |
2022 EATON MAGNUM DS T5C SWITCHGEAR MODULE | LOW-VOLTAGE TIE UNIT | BUS RATING 3200A | 3 POLE | TRIP SETTING 3000A
|
🔒 Subscribe |
|
|
2021 | FANUC | M-900IB/360 |
2021 FANUC M-900IB/360 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. INDUSTRIAL-GRADE PAYLOAD CAPACITY, 1540KG WEIGHT RATING. INCLUDES R30IB PLUS CONTROLLER UNIT, INTEGRATED I PENDANT INTERFACE, MOUNTING BASE ASSEMBLY. APPLICATION PROFILE INCLUDES SPOT WELDING OPERATIONS AND MATERIAL HANDLING WORKFLOWS. CUSTOM CANOO CENTERLINE ATTACHMENT FRAMEWORK. ROBOTIC ARM AND CONTROL ARCHITECTURE READY FOR DEPLOYMENT. CONTROLLER SERIAL NUMBER: E20Z12875
|
🔒 Subscribe |
|
|
2021 | FANUC | M-900IB/360 |
2021 FANUC M-900IB/360 SIX-AXIS ARTICULATED ARM ROBOTIC SYSTEM WITH R30IB PLUS CONTROLLER AND I PENDANT. PAYLOAD CAPACITY: 360 KG. MASS: 1540 KG. FLOOR-MOUNTED BASE INCLUDED. CANOO CENTERLINE SPOT WELDING ATTACHMENT (MATERIAL HANDLING CAPABILITY) IS NOT INCLUDED WITH THIS LOT. S/N: R2112071F
|
🔒 Subscribe |
|
|
2021 | FANUC | R-2000IC 210L |
2021 FANUC R-2000IC 210L ROBOT SYSTEM | 6 AXIS | PAYLOAD CAPACITY: 210 KG | MASS: 1,350 KG | CONTROLLER: R30IB PLUS | S/N: E21112123 | I PENDANT: INCLUDED | MOUNTING BASE: INCLUDED
|
🔒 Subscribe |
|
|
2021 | ASSA ABLOY | RP300 W |
2021 ASSA ABLOY RP300 W EXTERIOR ROLL-UP DOOR SKATEBOARD MANUFACTURING CELL 15 COMPLETE SAFETY CAGE ASSEMBLY WITH INTEGRATED AUTOMATION INFRASTRUCTURE PERIMETER SECURITY; ACCESS CONTROL FULL ENGINEERED SAFETY CAGE ENCLOSURE (14) BANNER EZ-SCREEN LIGHT CURTAINS [SAFETY-RATED DETECTION SYSTEM] AUTOMATION; CONTROL SYSTEMS ALLEN BRADLEY PLC ARCHITECTURE GUARDIAN MASTER ARMOR START SYSTEMS AUTOMATION DRIVES AND SWITCHING INFRASTRUCTURE (7) HMI ENCLOSURES [MOBILEVIEW PENDANT-EQUIPPED STATIONS] COMPLETE CABLING HARNESS [FLOOR AND CAGE-MOUNTED DISTRIBUTION] ELECTRICAL DISTRIBUTION; MONITORING (3) POWER DISTRIBUTION PANELS SCHNEIDER ELECTRIC PM5500 POWERLOGIC METER [INTEGRATED MONITORING] 120V SERVICE RECEPTACLE BOX PIN SCRIBE ENCLOSURE PNEUMATIC; HYDRAULIC INFRASTRUCTURE FULL ARGON DISTRIBUTION NETWORK [LINES AND VALVE ASSEMBLIES] COMPRESSED AIR SYSTEM [COMPLETE VALVE AND LINE INTEGRATION] WATER SUPPLY AND RETURN CIRCUIT [VALVE-CONTROLLED DISTRIBUTION] MATERIAL HANDLING; CABLE MANAGEMENT EATON B-LINE CABLE TRAY SYSTEM [FLOOR AND OVERHEAD MOUNTED] FULL CABLING INFRASTRUCTURE ENVIRONMENTAL SYSTEMS (7) BANNER WORKSTATION OVERHEAD LIGHTING (9) JANFAN WORKSTATION VENTILATION UNITS FOOTPRINT: 160' L 45' W
|
🔒 Subscribe |
|
|
2021 | FANUC | ARCMATE 120ID/12L |
2021 FANUC ARCMATE 120ID/12L 6-AXIS MIG WELDING ROBOT WITH 250KG PAYLOAD CAPACITY. CONTROLLER: FANUC SYSTEM R-30IB PLUS. TEACH PENDANT: INCLUDED. PRIMARY WELDER: FRONIUS TPS400I MIG UNIT (S/N: 32257006). WIRE FEEDER: WF 25I R PAP. WELDING HEAD ASSEMBLY: COMPLETE. SUPPORT SYSTEM: IGUS TRIFLEX R SERIES TRE CABLE MANAGEMENT. ROBOT-MOUNTED BASE CONFIGURATION. S/N: R21320202
|
🔒 Subscribe |
|
|
2020 | FANUC | ARCMATE 120ID |
2020 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING PLATFORM ROBOT SPECIFICATIONS MODEL: ARCMATE 120ID SERIAL NUMBER: R20Z20263 LOAD CAPACITY: 250KG CONFIGURATION: 6-AXIS ARTICULATED ARM POWER SOURCE; WELDING EQUIPMENT FRONIUS TPS400I MIG WELDER [SERIAL: 32257003] WF 25I R PAP WIRE FEEDER INTEGRATED WELDING HEAD ASSEMBLY CONTROL ARCHITECTURE FANUC SYSTEM R-30IB PLUS CONTROLLER [SERIAL: E20Y12631] TEACH PENDANT INCLUDED FULL PROGRAMMING CAPABILITY INFRASTRUCTURE; ACCESSORIES IGUS TRIFLEX R SERIES TRE CABLE MANAGEMENT SYSTEM ROBOT MOUNTING BASE INCLUDED COMPLETE INTEGRATED CELL CONFIGURATION VINTAGE: 2020
|
🔒 Subscribe |
|
|
2020 | FANUC | ARCMATE 120ID |
2020 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING SYSTEM. 6-AXIS ARTICULATED ARM, 250KG PAYLOAD CAPACITY. INCLUDES FRONIUS TPS400I MIG WELDER (S/N 32257015) WITH INTEGRATED WF 25I R PAP WIRE FEEDER AND COMPLETE WELDING HEAD ASSEMBLY. FANUC SYSTEM R-30IB PLUS CONTROLLER (S/N E20Y12632) WITH TEACH PENDANT (I PENDANT). IGUS TRIFLEX R SERIES TRE CABLE MANAGEMENT SYSTEM. ROBOT BASE MOUNTING INCLUDED. S/N R20Z20264
|
🔒 Subscribe |
|
|
2021 | UTICA INTERNATIONAL | PRECISION ROTATIONAL ASSEMBLY PLATFORM |
2021 UTICA INTERNATIONAL PRECISION ROTATIONAL ASSEMBLY PLATFORM TRUNNION-BASED TURNTABLE CONFIGURATION. DUAL FANUC 22/3000-B SERVO MOTORS (4HP, 3000RPM, AC-DRIVEN). TWENTY-THREE (23) PROAX SMC PNEUMATIC DRIVES INTEGRATED. CUSTOM-ENGINEERED TRUNNION CLAMPS FOR CANOO CAP HANDLING APPLICATION. DESTACO ACTUATOR POWER ARCHITECTURE. INTEGRATED CABLE MANAGEMENT VIA BECKER SYSTEM. CANOO ID: 20RH. DUAL 4HP MOTOR CONFIGURATION ENABLES CONSISTENT ROTATIONAL INDEXING. MULTI-AXIS PNEUMATIC CONTROL VIA SMC DRIVE NETWORK. INDUSTRIAL-GRADE TRUNNION BEARING ASSEMBLY. COMPLETE CABLE ROUTING SOLUTION INCLUDED. DESTACO ACTUATION FRAMEWORK. PRODUCTION-READY CONDITION.
|
🔒 Subscribe |
|
|
2019 | FANUC | R-2000IC 210F |
2019 FANUC R-2000IC 210F 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SIX-AXIS CONFIGURATION. LOAD CAPACITY: 210KG. PAYLOAD CLASS. DRY WEIGHT: 1,090KG. MOUNTING: CENTERLINE BASE ASSEMBLY. TEACH PENDANT (I-SERIES). NETWORK INTEGRATION READY. ROBOT SERIAL NUMBER: R19Z008C6. CONTROLLER SERIAL NUMBER: E19Z30488. SPOT WELDING TOOLING NOT INCLUDED.
|
🔒 Subscribe |
|
|
2020 | FANUC | ARCMATE 120ID |
2020 FANUC ARCMATE 120ID 6-AXIS COLLABORATIVE MIG WELDING SYSTEM WITH FRONIUS TPS400I MIG WELDER UNIT, FRONIUS WF 25I R PAP WIRE FEEDER, FANUC SYSTEM R-30IB PLUS CONTROLLER, TEACH PENDANT, AND IGUS TRIFLEX R SERIES TRE CABLE MANAGEMENT SYSTEM. S/N: R20Z20265, WELDER S/N: 32257010, CONTROLLER S/N: E20Y12633
|
🔒 Subscribe |
|
|
2016 | FANUC | M-900IB/280 |
2016 FANUC M-900IB/280 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 280 KG, WEIGHT: 1700 KG. INCLUDES MOUNTING BASE, TEACH PENDANT (SCREEN DISPLAY: CRACKED), CANOO FRAME TRANSFER ATTACHMENT, CANOO UNIT ID: 120 R01, SMC CONTROL VALVES FOR PNEUMATIC INTEGRATION. S/N: R16Z01225
|
🔒 Subscribe |
|
|
2015 | INGERSOLL RAND | R160IE-W125 |
2015 INGERSOLL RAND R160IE-W125 ROTARY SCREW AIR COMPRESSOR. PREMIUM EFFICIENCY CONFIGURATION. DISPLACEMENT CAPACITY: 970 CFM. OPERATING PRESSURE RATING: 115 PSI. MOTOR CONFIGURATION: 200 HP NOMINAL | 1,800 RPM MAXIMUM. ELECTRICAL REQUIREMENTS: 460V | 60HZ | 3-PHASE | 5,000A. HIGH-EFFICIENCY ROTARY SCREW DESIGN ENGINEERED FOR SUSTAINED INDUSTRIAL DUTY CYCLES. PREMIUM-CLASS UNIT DELIVERS CONSISTENT AIR DELIVERY WITH ADVANCED THERMAL MANAGEMENT. THREE-PHASE ELECTRICAL ARCHITECTURE SUPPORTS DEMANDING COMPRESSED AIR APPLICATIONS ACROSS MANUFACTURING, PROCESSING, AND PNEUMATIC SYSTEMS. S/N: VFF1505U15173
|
🔒 Subscribe |
|
|
2021 | UTICA | INTERNATIONAL SERIES |
2021 UTICA INTERNATIONAL ROTARY PLATFORM HEAVY-DUTY TURNTABLE ASSEMBLY ENGINEERED FOR PRECISION WORKHOLDING SPECIALIZED CLAMPING APPARATUS DESIGNED FOR CANOO CAP SUBSTRATE POSITIONING CUSTOM-FABRICATED CLAMP INTERFACE WITH INTEGRATED MANIPULATION CAPABILITY ACTUATION; DRIVE SYSTEMS | DESTACO-POWERED ACTUATOR NETWORK CONTROLLING CLAMP ENGAGEMENT | TWENTY-TWO (22) PROAX SMC PNEUMATIC DRIVE UNITS | SYNCHRONIZED MOTION CONTROL ACROSS ALL CLAMPING STATIONS INFRASTRUCTURE; SUPPORT BECKER CABLE MANAGEMENT SYSTEM | FULL INTEGRATION COMPLETE ELECTRICAL HARNESS AND CONTROL CONNECTIVITY CANOO IDENTIFICATION REFERENCE: 20LH OPERATIONAL SPECIFICATION READY FOR INTEGRATION INTO AUTOMATED PRODUCTION WORKFLOWS | IMMEDIATE DEPLOYMENT CAPABILITY
|
🔒 Subscribe |
|
|
2016 | INGERSOLL RAND | R160IE-W125 |
2016 INGERSOLL RAND R160IE-W125 ROTARY SCREW AIR COMPRESSOR SYSTEM. PREMIUM EFFICIENCY. DISPLACEMENT CAPACITY: 970 CFM. OPERATING PRESSURE RATING: 115 PSI. MOTOR CONFIGURATION: 200 HP NOMINAL. MAXIMUM SPEED: 1,800 RPM. ELECTRICAL REQUIREMENTS: SUPPLY VOLTAGE: 460V | 60HZ | 3-PHASE. CURRENT DRAW: 5000A. PREMIUM EFFICIENCY DESIGN. THIS PREMIUM-TIER COMPRESSOR DELIVERS ROBUST COMPRESSED AIR GENERATION FOR INDUSTRIAL APPLICATIONS REQUIRING CONSISTENT, HIGH-VOLUME OUTPUT. THE R160IE-W125 PLATFORM INTEGRATES ADVANCED ROTARY SCREW TECHNOLOGY WITH EFFICIENT MOTOR COUPLING, ENGINEERED FOR EXTENDED SERVICE LIFE IN DEMANDING PRODUCTION ENVIRONMENTS. S/N: VFF1557U16021
|
🔒 Subscribe |
|
|
UTICA | INTERNATIONAL SERIES |
UTICA INTERNATIONAL SERIES TRUNNION TABLE PURPOSE-BUILT CONFIGURATION SPECIALIZED FIXTURE ENGINEERED FOR CANOO REAR FRAME PROCESSING CUSTOM CLAMPING ARCHITECTURE INTEGRATED THROUGHOUT WORK SURFACE ACTUATION; CONTROL SYSTEMS DESTACO-POWERED CLAMP MANIPULATION [PRIMARY ACTUATION] THIRTEEN (13) PROAX SMC PNEUMATIC DRIVES [DISTRIBUTED CONTROL NETWORK] BECKER CABLE MANAGEMENT INFRASTRUCTURE [INTEGRATED ROUTING] TECHNICAL IDENTITY | CANOO REFERENCE: LV1-SKB-RFRM-100-G
|
🔒 Subscribe | |
|
|
2015 | PARKER IONICS | QFLO 16000 |
2015 PARKER IONICS QFLO 16000 SPRAY POWDER COATING BOOTH SYSTEM. INTERIOR DIMENSIONS: APPROXIMATELY 30' LENGTH 14' WIDTH 12' HEIGHT. VENTILATION RATE: 16,000 CFM. MOTOR CONFIGURATION: 2 HORSEPOWER. ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HZ, 3-PHASE. INDUSTRIAL POWDER COATING SPRAY APPLICATION FOR HIGH-VOLUME PRODUCTION ENVIRONMENT. S/N: 2015-1154 2A
|
🔒 Subscribe |
|
|
2015 | PARKER IONICS | QFLO 16000 |
2015 PARKER IONICS QFLO 16000 SPRAY POWDER COATING BOOTH. INTERIOR DIMENSIONS: 30' L 14' W 12' H (APPROXIMATE). MOTOR SPECIFICATIONS: 2 HORSEPOWER, 460 VOLTS, 60 HERTZ, 3-PHASE. VENTILATION CAPACITY: 16,000 CFM. SERIAL NUMBER: 2015-1154 1B. HIGH-VOLUME POWDER COATING APPLICATION SYSTEM ENGINEERED FOR INDUSTRIAL PRODUCTION ENVIRONMENTS. THIS BOOTH CONFIGURATION DELIVERS ROBUST AIR HANDLING AND CONTAINMENT FOR CONSISTENT SPRAY OPERATIONS ACROSS MEDIUM TO LARGE WORKPIECES.
|
🔒 Subscribe |
|
|
MICHAEL RIEDEL |
590KVA TRANSFORMER - 400V ELECTRICAL SUPPLY: 400V | 60HZ CORE LOSS SPECIFICATION: 1076W INSULATION TECHNOLOGY: VACUUM-SEALED CONSTRUCTION TOTAL WEIGHT: 1,776KG PALLET-MOUNTED ASSEMBLY INTEGRATED AUXILIARY TUBING SYSTEMS CABLE TRAY INFRASTRUCTURE INCLUDED S/N: 81662320
|
🔒 Subscribe | ||
|
|
2021 | WEG | DPVP SERIES |
2021 DPVP SERIES UNIT CLOSED TANK + PUMP STATION WITH 500-GALLON POLYETHYLENE STORAGE VESSEL NSF CERTIFIED, RATED CAPACITY: 96 PSI MAXIMUM OPERATING PRESSURE. WEG-MANUFACTURED CONTROL INTERFACE PANEL, INTEGRATED TUBING ASSEMBLY, VALVE MANIFOLD CONFIGURATION, TERMINATION AT PRIMARY JUNCTION POINT. FLUID SPECIFICATION: TREATMENT AGENT: PROMEX CMT 1.5 ADDITIVE PACKAGE. APPLICATION: THERMAL MANAGEMENT FOR CENTERLINE RESISTANCE SPOT WELDING OPERATIONS. INDUSTRIAL COOLING DUTY. S/N: 17239295-8
|
🔒 Subscribe |
|
|
2021 | ATLAS COPCO | SCA |
2021 ATLAS COPCO SCA SEALANT DISPENSING ASSEMBLY SYSTEM. PPK57-285P08-1000-SCA-HPS SINGLE PUMP UNIT (350 PSI MAXIMUM OPERATING PRESSURE). SEALER CONTROLLER (ADKE-6000-H DESIGNATION). IAS GMBH SHOT METER (10CCM CAPACITY, 49.7 STROKE LENGTH, 25:1 RATIO). FANUC ROBOT-INTEGRATED APPLICATOR ATTACHMENT. PUMP ASSEMBLY S/N: 30020870/12118. CONTROLLER MODULE S/N: 30020869. METER UNIT S/N: B3700 100002. INDUSTRIAL-GRADE SEALANT DISPENSING PLATFORM ENGINEERED FOR AUTOMATED PRODUCTION ENVIRONMENTS. SCA CONFIGURATION DELIVERS CONTROLLED MATERIAL APPLICATION THROUGH SYNCHRONIZED PUMP-METER-CONTROLLER INTEGRATION WITH ROBOTIC POSITIONING CAPABILITY.
|
🔒 Subscribe |
|
|
UTICA INTERNATIONAL | TRUNNION PLATFORM |
UTICA INTERNATIONAL TRUNNION PLATFORM CORE EQUIPMENT: HEAVY-DUTY TRUNNION TABLE CONFIGURATION PRIMARY APPLICATION: CANOO SKATEBOARD ASSEMBLY; POSITIONING ACTUATION; CONTROL SYSTEMS CUSTOM CLAMP ARRAY | DESTACO-POWERED ACTUATORS DUAL PROAX SMC SERVO DRIVES | SYNCHRONIZED MOTION CONTROL TURCK UPROX PLUS PROXIMITY DETECTION | INTEGRATED SENSING LAYER BECKER CABLE MANAGEMENT INFRASTRUCTURE | ORGANIZED ROUTING CONFIGURATION: PRODUCTION-READY | FULLY INTEGRATED THIS TRUNNION PLATFORM DELIVERS REPEATABLE, PRECISION MANIPULATION FOR SKATEBOARD COMPONENT HANDLING. THE DESTACO ACTUATOR CLUSTER PROVIDES CONTROLLED CLAMPING FORCE, WHILE DUAL SMC DRIVES ENABLE MULTI-AXIS POSITIONING. TURCK PROXIMITY SENSORS ENSURE ACCURATE PART LOCATION AND CYCLE VERIFICATION. COMPLETE CABLE MANAGEMENT BY BECKER ELIMINATES DOWNTIME FROM ROUTING FAILURES. PURPOSE-BUILT FOR HIGH-VOLUME MANUFACTURING ENVIRONMENTS REQUIRING CONSISTENT PART MANIPULATION AND REPEATABILITY.
|
🔒 Subscribe | |
|
|
UTICA | INTERNATIONAL SERIES |
UTICA INTERNATIONAL SERIES TURNTABLE. PRIMARY APPLICATION: SPECIALIZED SUBSTRATE MANIPULATION AND POSITIONING. CLAMPING SYSTEM: CUSTOM-ENGINEERED FIXTURE SET OPTIMIZED FOR CANOO CAP SUBSTRATES. ACTUATION TECHNOLOGY: DESTACO-POWERED PNEUMATIC CLAMPS. DRIVE CONFIGURATION: 29X PROAX SMC ACTUATORS. INTEGRATED MOTION CONTROL. CABLE INFRASTRUCTURE: BECKER-SUPPLIED MANAGEMENT SYSTEM. FACTORY-INSTALLED ROUTING. FULL-ROTATION TURNTABLE BASE WITH INDEXED POSITIONING. MULTI-POINT CLAMPING ARRAY FOR SECURE SUBSTRATE RETENTION. COORDINATED DRIVE SYSTEM ENABLING SIMULTANEOUS OR SEQUENTIAL MOTION. INTEGRATED CABLE MANAGEMENT FOR OPERATIONAL EFFICIENCY.
|
🔒 Subscribe | |
|
|
UTICA | INTERNATIONAL SERIES |
UTICA INTERNATIONAL SERIES ROTARY WORK PLATFORM SYSTEM INTEGRATED TURNTABLE MECHANISM DESIGNED FOR COMPONENT POSITIONING AND ASSEMBLY WORKFLOWS CUSTOM-ENGINEERED CLAMPING APPARATUS ENGINEERED FOR CANOO CAP SUBSTRATE HANDLING DESTACO-POWERED ACTUATOR SYSTEM GOVERNING CLAMP ENGAGEMENT/RELEASE CYCLES THIRTY-THREE (33) PROAX SMC PNEUMATIC DRIVE MODULES DISTRIBUTED THROUGHOUT PLATFORM BECKER CABLE MANAGEMENT INFRASTRUCTURE FULLY INTEGRATED ROUTING CANOO-COMPATIBLE SUBSTRATE INTERFACE PRECISION MANIPULATION CAPABILITY FOR CAP ASSEMBLY OPERATIONS COMPLETE CABLE MANAGEMENT SYSTEM INCLUDED CANOO ID: 20RH
|
🔒 Subscribe | |
|
|
2021 | UTICA INTERNATIONAL | TRUNNION TURNTABLE SYSTEM |
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM CORE ASSEMBLY TRUNNION-BASED ROTATION PLATFORM MANUFACTURED 2021 UTICA INTERNATIONAL CONSTRUCTION ACTUATION; CONTROL ARCHITECTURE DUAL FANUC 22/3000-B SERVO MOTORS (4HP | 3000RPM | AC) (38) PROAX SMC PNEUMATIC DRIVES INTEGRATED THROUGHOUT DESTACO-POWERED ACTUATOR NETWORK MANAGING CLAMP OPERATIONS SPECIALIZED TOOLING CUSTOM CLAMP APPARATUS FITTED TO TRUNNION STRUCTURE PURPOSE-ENGINEERED FOR CANOO BULKHEAD SUBASSEMBLY HANDLING PRECISION MANIPULATION CAPABILITY VIA COORDINATED CLAMP SYSTEM INFRASTRUCTURE BECKER CABLE MANAGEMENT SYSTEM (COMPLETE) CANOO SYSTEM IDENTIFIER: FFRM 10RH
|
🔒 Subscribe |
|
|
2021 | UTICA INTERNATIONAL | FFRM LWR 130 |
2021 UTICA INTERNATIONAL TRUNNION-BASED TURNTABLE CONFIGURATION. DUAL FANUC 22/3000-B SERVO MOTORS, 4HP EACH, 3000RPM AC-DRIVEN. INTEGRATED CABLE MANAGEMENT BY BECKER. CUSTOM-ENGINEERED TRUNNION CLAMPS, CANOO BULKHEAD SUBSTRATE COMPATIBILITY. DESTACO-ACTUATED POWER DELIVERY SYSTEM. (22) PROAX SMC PNEUMATIC DRIVES, DISTRIBUTED ACTUATION NETWORK. CANOO REFERENCE: FFRM LWR 130. HEAVY-DUTY INDEXING PLATFORM DESIGNED FOR CONTROLLED SUBSTRATE POSITIONING AND MULTI-AXIS MATERIAL HANDLING. SERVO-DRIVEN ROTATION WITH SYNCHRONIZED PNEUMATIC SUPPORT STRUCTURE.
|
🔒 Subscribe |
|
|
2021 | UTICA INTERNATIONAL | TRUNNION TURNTABLE SYSTEM |
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM WITH CUSTOM-ENGINEERED CLAMPS, DESTACO ACTUATOR POWER DELIVERY SYSTEM, (35) PROAX SMC PNEUMATIC DRIVES, DUAL FANUC 22/3000-B SERVO MOTORS (4HP RATING PER MOTOR UNIT, 3000 RPM OPERATIONAL SPECIFICATION, 3-PHASE AC CONFIGURATION), AND BECKER CABLE MANAGEMENT SOLUTION. CANOO ID: FFRM 100RH.
|
🔒 Subscribe |
|
|
UTICA INTERNATIONAL | HEAVY DUTY TURNTABLE |
UTICA INTERNATIONAL HEAVY DUTY TURNTABLE WITH INTEGRATED TRANSFER MECHANISM. SPECIALIZED CLAMPING APPARATUS ENGINEERED FOR CANOO RAIL POSITIONING AND TRANSPORT. CONTROL ARCHITECTURE: (20) PROGRAMMABLE SMCVQC 450151 X503 CONTROLLERS, (1) SMC S1 ETHERNET/IP INTERFACE MODULE, (2) ALLEN BRADLEY 836P D2NFGB36PP D4 PRESSURE SWITCHES. PNEUMATIC INTEGRATION: (6) SMC EX600-DXPD VALVE ASSEMBLIES. CANOO ID: FFRM 20
|
🔒 Subscribe | |
|
|
2021 | UTICA | INTERNATIONAL SERIES |
2021 UTICA INTERNATIONAL SERIES TRUNNION-MOUNTED ROTATING PLATFORM SYSTEM DUAL-AXIS MANIPULATION CAPABILITY ACTUATION; DRIVE SYSTEMS PRIMARY MOTORS (2) FANUC 22/3000-B AC SERVO MOTORS 4HP RATING 3000RPM SUPPLEMENTARY DRIVES (13) PROAX SMC PNEUMATIC UNITS CLAMPING ACTUATORS DESTACO-POWERED CUSTOM ENGAGEMENT SYSTEM MATERIAL HANDLING INTEGRATION CUSTOM-ENGINEERED TRUNNION CLAMPS CANOO FRAME-SPECIFIC DESIGN BECKER CABLE MANAGEMENT INFRASTRUCTURE FULL MECHANICAL SYNCHRONIZATION ACROSS ALL AXES TECHNICAL DESIGNATION CANOO ID: FFRM CMPLT 170
|
🔒 Subscribe |
|
|
2022 | UNIFIED INDUSTRIES | UAN 483 07 |
2022 UNIFIED INDUSTRIES ARTICULATING JIB BOOM CRANE SYSTEM, CATEGORY B, OPERATIONAL CLASSIFICATION 3, TOTAL WEIGHT 139 LBS, DUAL 360-DEGREE PIVOT POINTS. HOIST COMPONENT MODEL UAN 483 07, SERIAL NUMBER 210611 7651. FEATURES FULL-ROTATION ARTICULATING BOOM DESIGN, INTEGRATED DUAL-AXIS SWIVEL CAPABILITY, COMPACT FOOTPRINT, AND INDUSTRIAL-GRADE LOAD MANAGEMENT SYSTEM. S/N: 66290
|
🔒 Subscribe |
|
|
2021 | UTICA INTERNATIONAL | TRUNNION TURNTABLE |
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE POSITIONING SYSTEM WITH DUAL FANUC 22/3000-B SERVO MOTORS (4HP | 3000RPM | AC CONFIGURATION), TRUNNION ASSEMBLY WITH INTEGRATED MANIPULATION FRAMEWORK, DESTACO-POWERED ACTUATION SYSTEM, PROAX SMC DRIVE NETWORK (QTY: 18 UNITS), CUSTOM CLAMP CONFIGURATION (CANOO BULKHEAD SUBSTRATE COMPATIBILITY), BECKER CABLE MANAGEMENT INFRASTRUCTURE. HEAVY-DUTY ROTATION CAPABILITY, PRECISION SUBSTRATE POSITIONING, INDUSTRIAL-GRADE MOTOR COUPLING. CANOO ID: FFRM LWR 120
|
🔒 Subscribe |
|
|
GAT |
INDUSTRIAL BATCH POWDER-PRETREAT OVEN CHAMBER SPECIFICATIONS INTERIOR DIMENSIONS: APPROXIMATELY 29 FEET (LENGTH) 10 FEET (WIDTH) 11 FEET (HEIGHT) ELECTRICAL REQUIREMENTS VOLTAGE: 460V TOTAL FULL LOAD AMPERAGE: 51.6 FLA FREQUENCY: 60HZ PHASE: 3-PHASE SCHEMATIC REFERENCE: 15002D/E
|
🔒 Subscribe | ||
|
|
INGERSOLL RAND | NVC1000W40N |
REFRIGERATED DRYER NIRVANA SERIES - NVC1000W40N BY INGERSOLL RAND. NIRVANA CYCLING TECHNOLOGY. MAXIMUM ALLOWABLE WORKING PRESSURE: 200 PSI. REFRIGERANT TYPE: R404A. MOTOR RATING: 5 HORSEPOWER. ELECTRICAL CONFIGURATION: 460V | 50HZ | 3-PHASE. CURRENT DRAW: 11.3 AMPERES. INDUSTRIAL-GRADE MOISTURE REMOVAL EQUIPMENT ENGINEERED FOR COMPRESSED AIR APPLICATIONS. CYCLING REFRIGERATION DESIGN OPTIMIZES ENERGY CONSUMPTION WHILE MAINTAINING CONSISTENT DEW POINT PERFORMANCE. CONSTRUCTED TO WITHSTAND DEMANDING OPERATIONAL ENVIRONMENTS WITH ROBUST PRESSURE VESSEL CONSTRUCTION RATED AT 200 PSI THRESHOLD.
|
🔒 Subscribe | |
|
|
COGNEX | 821 |
COGNEX 821 CAMERA UNIT WITH 35MM EDMUND OPTICS LENS [F1.8 APERTURE RATING] AND INTEGRATED EFFLUX LIGHTING. SECONDARY CAMERA MODULE: COGNEX 832-10210-1R CAMERA. ILLUMINATION PACKAGE INCLUDES FOUR (4) EFFLUX LIGHT BARS. MOUNTING INFRASTRUCTURE: PEDESTAL-STYLE SUPPORT STRUCTURE. S/N: 1A2110PP246733
|
🔒 Subscribe | |
|
|
ALLEN BRADLEY |
INTEGRATED SAFETY CAGE; AUTOMATION SYSTEM SAFETY INFRASTRUCTURE FULL PERIMETER SAFETY CAGE ENCLOSURE (28) BANNER EZ-SCREEN LIGHT CURTAINS GUARD MASTER ARMOR START SYSTEMS WITH INTEGRATED CONTROLS AUTOMATION; CONTROL ALLEN BRADLEY PLC AUTOMATION DRIVES AND SWITCHES (4) HMI ENCLOSURES EQUIPPED WITH MOBILEVIEW PENDANT SYSTEMS COMPREHENSIVE CABLING THROUGHOUT POWER; DISTRIBUTION (2) POWER DISTRIBUTION PANELS SCHNEIDER ELECTRIC PM5500 POWERLOGIC METERS [BOTH PANELS] 120V SERVICE RECEPTACLE BOX FULL EATON B LINE CABLE TRAY [FLOOR AND CAGE-MOUNTED] PNEUMATIC; HYDRAULIC COMPLETE ARGON GAS LINE INFRASTRUCTURE WITH VALVES COMPRESSED AIR SYSTEM WITH DISTRIBUTION VALVES WATER SUPPLY AND RETURN LINES WITH INTEGRATED VALVE STATIONS WORKSTATION AMENITIES (4) JANFAN WORKSTATION FANS (3) BANNER OVERHEAD WORKSTATION LIGHTS SPECIFICATIONS MAXIMUM FOOTPRINT: 80' L X 45' W
|
🔒 Subscribe | ||
|
|
ALLEN BRADLEY |
FULL PERIMETER SAFETY CAGE WITH INTEGRATED BANNER EZ-SCREEN LIGHT CURTAIN ARRAY (22 UNITS) MAXIMUM OPERATIONAL FOOTPRINT: 80' LENGTH 30' WIDTH EATON B LINE CABLE TRAY INFRASTRUCTURE | FLOOR AND CAGE-MOUNTED CONFIGURATIONS ALLEN BRADLEY PLC-BASED DRIVE SYSTEMS WITH INTEGRATED AUTOMATION LOGIC GUARD MASTER ARMOR START SAFETY INITIATION SYSTEMS MOBILEVIEW PENDANT INTERFACE SUITE (3 UNITS) WITH HMI ENCLOSURE PACKAGES COMPREHENSIVE SWITCHING AND CABLING INFRASTRUCTURE THROUGHOUT PRIMARY POWER DISTRIBUTION PANEL FEATURING SCHNEIDER ELECTRIC PM5500 POWERLOGIC METERING 120V SERVICE RECEPTACLE BOX FULL ARGON GAS SUPPLY AND DISTRIBUTION NETWORK WITH ISOLATION VALVES COMPRESSED AIR DELIVERY SYSTEM WITH INTEGRATED VALVE CONTROLS WATER SUPPLY AND RETURN LINE INFRASTRUCTURE WITH ISOLATION AND CONTROL VALVES OVERHEAD WORKSTATION LIGHTING ARRAY (4) BANNER UNITS VENTILATION SUPPORT (4) JANFAN WORKSTATION-MOUNTED FANS
|
🔒 Subscribe | ||
|
|
2023 | GARDNER DENVER | L11 SERIES |
2023 GARDNER DENVER L11 SERIES ROTARY SCREW AIR COMPRESSOR SYSTEM 100 PSI OPERATING PRESSURE RATING 460V 3-PHASE 60HZ ELECTRICAL CONFIGURATION S/N: D250406 INDUSTRIAL-GRADE ROTARY SCREW DESIGN THREE-PHASE POWER SUPPLY STANDARD NORTH AMERICAN ELECTRICAL CONFIGURATION ENGINEERED FOR CONTINUOUS INDUSTRIAL DUTY CYCLES STANDARD PRESSURE CLASS APPLICATION
|
🔒 Subscribe |
|
|
UTICA INTERNATIONAL | MANUFACTURING SYSTEM |
HEAVY-DUTY ROTATIONAL TRANSFER PLATFORM UTICA INTERNATIONAL MANUFACTURING SYSTEM FOR CANOO BUMPER ASSEMBLY OPERATIONS. SEVEN (7) PROGRAMMABLE LOGIC CONTROLLERS SMC VQC 4501-51 X503 SERIES. DESTACO ACTUATION SYSTEM WITH INTEGRATED CLAMPING NETWORK. CUSTOM-ENGINEERED FIXTURE CLAMPS OPTIMIZED FOR BUMPER COMPONENT POSITIONING. TURNTABLE MECHANISM ENGINEERED FOR PRECISION MATERIAL TRANSFER WORKFLOWS. MULTI-STATION CAPABILITY SUPPORTING SEQUENTIAL ASSEMBLY PROCESSES.
|
🔒 Subscribe |
2019 FANUC R-2000IC 210F
2019 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACI...
2022 EATON MAGNUM DS T5C
2022 EATON MAGNUM DS T5C SWITCHGEAR MODULE. LOW-VOLTAGE SWITCHGEAR SYSTEM, TIE T5C MODULE, 3200A BUS...
2020 FANUC R-2000IC 210F
2020 FANUC R-2000IC 210F SIX-AXIS COLLABORATIVE ROBOTIC SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD C...
2020 FANUC R-2000IC 210F
2020 FANUC R-2000IC 210F 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 210KG. MA...
2019 FANUC R-2000IC 210F
2019 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOT SYSTEM. PAYLOAD CAPACITY: 210 KG. MASS: 1090 KG. ...
2021 FANUC M-900IB/360
2021 FANUC M-900IB/360 ROBOTIC SYSTEM, 6-AXIS CONFIGURATION ROBOT UNIT. PAYLOAD CAPACITY: 360 KG. MA...
2021 FANUC M-900IB/360
2021 FANUC M-900IB/360 ROBOTIC SYSTEM, 6-AXIS CONFIGURATION. PAYLOAD CAPACITY: 360 KG. MASS: 1540 KG...
2020 FANUC R-2000IC 210F
2020 FANUC R-2000IC 210F SIX-AXIS INDUSTRIAL ROBOTIC ARM PAYLOAD CAPACITY: 210KG REACH: 1090MM CONTR...
2020 FANUC R-2000IC 210F
2020 FANUC R-2000IC 210F 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. INDUSTRIAL 6-AXIS CONFIGURA...
2020 FANUC M-900IB/360
2020 FANUC M-900IB/360 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SERIAL NUMBER: R203202B8. PAY...
2019 FANUC R-2000IC 210F
2019 FANUC R-2000IC 210F 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SIX-AXIS ROBOTIC ARM ASSEMB...
2019 FANUC ARCMATE 120ID
2019 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING SYSTEM. PAYLOAD CAPACITY: 250KG. PRIMARY APPLICATION...
2022 EATON MAGNUM DS T5C
2022 EATON MAGNUM DS T5C SWITCHGEAR MODULE | LOW-VOLTAGE TIE UNIT | BUS RATING 3200A | 3 POLE | TRIP...
2021 FANUC M-900IB/360
2021 FANUC M-900IB/360 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. INDUSTRIAL-GRADE PAYLOAD CAPA...
2021 FANUC M-900IB/360
2021 FANUC M-900IB/360 SIX-AXIS ARTICULATED ARM ROBOTIC SYSTEM WITH R30IB PLUS CONTROLLER AND I PEND...
2021 FANUC R-2000IC 210L
2021 FANUC R-2000IC 210L ROBOT SYSTEM | 6 AXIS | PAYLOAD CAPACITY: 210 KG | MASS: 1,350 KG | CONTROL...
2021 ASSA ABLOY RP300 W
2021 ASSA ABLOY RP300 W EXTERIOR ROLL-UP DOOR SKATEBOARD MANUFACTURING CELL 15 COMPLETE SAFETY CAGE ...
2021 FANUC ARCMATE 120ID/12L
2021 FANUC ARCMATE 120ID/12L 6-AXIS MIG WELDING ROBOT WITH 250KG PAYLOAD CAPACITY. CONTROLLER: FANUC...
2020 FANUC ARCMATE 120ID
2020 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING PLATFORM ROBOT SPECIFICATIONS MODEL: ARCMATE 120ID S...
2020 FANUC ARCMATE 120ID
2020 FANUC ARCMATE 120ID 6-AXIS ROBOTIC WELDING SYSTEM. 6-AXIS ARTICULATED ARM, 250KG PAYLOAD CAPACI...
2021 UTICA INTERNATIONAL PRECISION ROTATIONAL ASSEMBLY PLATFORM
2021 UTICA INTERNATIONAL PRECISION ROTATIONAL ASSEMBLY PLATFORM TRUNNION-BASED TURNTABLE CONFIGURATI...
2019 FANUC R-2000IC 210F
2019 FANUC R-2000IC 210F 6 AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. SIX-AXIS CONFIGURATION. LOA...
2020 FANUC ARCMATE 120ID
2020 FANUC ARCMATE 120ID 6-AXIS COLLABORATIVE MIG WELDING SYSTEM WITH FRONIUS TPS400I MIG WELDER UNI...
2016 FANUC M-900IB/280
2016 FANUC M-900IB/280 6-AXIS ROBOT SYSTEM WITH R30IB PLUS CONTROLLER. PAYLOAD CAPACITY: 280 KG, WEI...
2015 INGERSOLL RAND R160IE-W125
2015 INGERSOLL RAND R160IE-W125 ROTARY SCREW AIR COMPRESSOR. PREMIUM EFFICIENCY CONFIGURATION. DISPL...
2021 UTICA INTERNATIONAL SERIES
2021 UTICA INTERNATIONAL ROTARY PLATFORM HEAVY-DUTY TURNTABLE ASSEMBLY ENGINEERED FOR PRECISION WORK...
2016 INGERSOLL RAND R160IE-W125
2016 INGERSOLL RAND R160IE-W125 ROTARY SCREW AIR COMPRESSOR SYSTEM. PREMIUM EFFICIENCY. DISPLACEMENT...
UTICA INTERNATIONAL SERIES
UTICA INTERNATIONAL SERIES TRUNNION TABLE PURPOSE-BUILT CONFIGURATION SPECIALIZED FIXTURE ENGINEERED...
2015 PARKER IONICS QFLO 16000
2015 PARKER IONICS QFLO 16000 SPRAY POWDER COATING BOOTH SYSTEM. INTERIOR DIMENSIONS: APPROXIMATELY ...
2015 PARKER IONICS QFLO 16000
2015 PARKER IONICS QFLO 16000 SPRAY POWDER COATING BOOTH. INTERIOR DIMENSIONS: 30' L 14' W 12' H (AP...
MICHAEL RIEDEL
590KVA TRANSFORMER - 400V ELECTRICAL SUPPLY: 400V | 60HZ CORE LOSS SPECIFICATION: 1076W INSULATION T...
2021 WEG DPVP SERIES
2021 DPVP SERIES UNIT CLOSED TANK + PUMP STATION WITH 500-GALLON POLYETHYLENE STORAGE VESSEL NSF CER...
2021 ATLAS COPCO SCA
2021 ATLAS COPCO SCA SEALANT DISPENSING ASSEMBLY SYSTEM. PPK57-285P08-1000-SCA-HPS SINGLE PUMP UNIT ...
UTICA INTERNATIONAL TRUNNION PLATFORM
UTICA INTERNATIONAL TRUNNION PLATFORM CORE EQUIPMENT: HEAVY-DUTY TRUNNION TABLE CONFIGURATION PRIMAR...
UTICA INTERNATIONAL SERIES
UTICA INTERNATIONAL SERIES TURNTABLE. PRIMARY APPLICATION: SPECIALIZED SUBSTRATE MANIPULATION AND PO...
UTICA INTERNATIONAL SERIES
UTICA INTERNATIONAL SERIES ROTARY WORK PLATFORM SYSTEM INTEGRATED TURNTABLE MECHANISM DESIGNED FOR C...
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM CORE ASSEMBLY TRUNNION-BASED ROTATION PLATFORM MA...
2021 UTICA INTERNATIONAL FFRM LWR 130
2021 UTICA INTERNATIONAL TRUNNION-BASED TURNTABLE CONFIGURATION. DUAL FANUC 22/3000-B SERVO MOTORS, ...
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE SYSTEM WITH CUSTOM-ENGINEERED CLAMPS, DESTACO ACTUATOR P...
UTICA INTERNATIONAL HEAVY DUTY TURNTABLE
UTICA INTERNATIONAL HEAVY DUTY TURNTABLE WITH INTEGRATED TRANSFER MECHANISM. SPECIALIZED CLAMPING AP...
2021 UTICA INTERNATIONAL SERIES
2021 UTICA INTERNATIONAL SERIES TRUNNION-MOUNTED ROTATING PLATFORM SYSTEM DUAL-AXIS MANIPULATION CAP...
2022 UNIFIED INDUSTRIES UAN 483 07
2022 UNIFIED INDUSTRIES ARTICULATING JIB BOOM CRANE SYSTEM, CATEGORY B, OPERATIONAL CLASSIFICATION 3...
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE
2021 UTICA INTERNATIONAL TRUNNION TURNTABLE POSITIONING SYSTEM WITH DUAL FANUC 22/3000-B SERVO MOTOR...
GAT
INDUSTRIAL BATCH POWDER-PRETREAT OVEN CHAMBER SPECIFICATIONS INTERIOR DIMENSIONS: APPROXIMATELY 29 F...
INGERSOLL RAND NVC1000W40N
REFRIGERATED DRYER NIRVANA SERIES - NVC1000W40N BY INGERSOLL RAND. NIRVANA CYCLING TECHNOLOGY. MAXIM...
COGNEX 821
COGNEX 821 CAMERA UNIT WITH 35MM EDMUND OPTICS LENS [F1.8 APERTURE RATING] AND INTEGRATED EFFLUX LIG...
ALLEN BRADLEY
INTEGRATED SAFETY CAGE; AUTOMATION SYSTEM SAFETY INFRASTRUCTURE FULL PERIMETER SAFETY CAGE ENCLOSURE...
ALLEN BRADLEY
FULL PERIMETER SAFETY CAGE WITH INTEGRATED BANNER EZ-SCREEN LIGHT CURTAIN ARRAY (22 UNITS) MAXIMUM O...
2023 GARDNER DENVER L11 SERIES
2023 GARDNER DENVER L11 SERIES ROTARY SCREW AIR COMPRESSOR SYSTEM 100 PSI OPERATING PRESSURE RATING ...
UTICA INTERNATIONAL MANUFACTURING SYSTEM
HEAVY-DUTY ROTATIONAL TRANSFER PLATFORM UTICA INTERNATIONAL MANUFACTURING SYSTEM FOR CANOO BUMPER AS...