Monthly MultiFacility CNC Fab No Reserve Auction

2009 AMADA ASTRO100NT ROBOTIC BRAKE LENGTH MACHINE LENGTH: 10 FT. MAX. WORKSHEET DIMENSIONS: 800 MM W / 31.5 IN W X 1000 MM L / 39.4 IN L X 2.3 MM THICKNESS / 0.09 IN THICKNESS PAYLOAD: 20 KG / 44.1 LBS **FEED RATE (AXIS):** D: 1 TO 20 MM/S / 0.04 TO 0.79 IN/S L: 3 TO 30 M/MIN / 9.84 TO 98.43 FT/MIN Y: 6 TO 60 M/MIN / 19.69 TO 196.85 FT/MIN Z: 1 TO 10 M/MIN / 3.28 TO 32.81 FT/MIN MAXIMUM BEND LENGTH:3060 MM / 120.5 IN RAM STROKE: 200 MM / 7.87 IN OPEN HEIGHT WITHOUT PUNCH HOLDERS: 500 MM / 19.7 IN RAM HIGH CLOSING SPEED:100 TO 200 MM/S / 3.94 TO 7.87 IN/S RAM BENDING SPEED:20 MM/S / 0.79 IN/S RAM OPENING SPEED: 100 TO 200 MM/S / 3.94 TO 7.87 IN/S NUMBER OF CYLINDERS:2 HYDRAULIC OIL TANK CAPACITY:57.5 L / 15.2 GAL RAM TILT:15 MM / 0.59 IN WORKSHEET THICKNESS: MIN: 0.6 MM / 0.024 IN MAX: 2.3 MM / 0.09 IN WORKSHEET WIDTH AND LENGTH: MIN: 150 X 150 MM / 5.91 X 5.91 IN MAX: PANEL SHAPE - 800 X 1000 MM / 31.5 X 39.4 IN; RIBBED SHAPE - 300 X 1800 MM / 11.8 X 70.9 IN MAX. WORKSHEET MASS:20 KG / 44.1 LBS MAX. NUMBER OF PROCESSES: 25 MAX. HEIGHT OF WORKSHEET STACK (HORIZONTAL LOADING UNIT): 500 MM / 19.7 IN MAX. NUMBER OF WORKSHEETS PER STACK (VERTICAL LOADING UNIT):122 MAX. PART STACK HEIGHT: 700 MM / 27.6 IN

2006 WOHLENBERG HANNOVER 1250 NC ENGINE LATHE MAX. SWING OVER BED :54 " MAX. SWING OVER THE SADDLE : 39.4" FACEPLATE DIAMETER : 39.4" MAX. TURNING LENGTH : 13.6 FT BED WIDTH : 36.6" MAIN SPINDLE BORE : 6.4' FLANGE MOUNT : DIN 55021 15 SPEEDS : 5.6 ... 450 U-MIN RPM INCREMENT : 1.12" FEED RATES : 0-11.8" MIN RAPID ADJUSTMENT OF THE ROTARY SUPPORT: 141.7"-MIN TAILSTOCK QUILL DIAMETER :12.5" QUILL MOVEMENT : 11" MAX. WORKPIECE WEIGHT BETWEEN THE TIPS 7200 KG 20HP EQUIPPED WITH: FAGOR CNC CONTROL 39.3" 4- JAW CHUCK 2 NO. 3 JAW CHUCKS POWERED TAIL STOCK WITH JOYSTICK WEIGHT: 28,000 LBS.

1996 DAEWOO PUMA 15 CNC LATHE (CONTROL: FANUC; CHUCK SIZE:18'; KITAGAWA CHUCK; SWING: 28"; BAR CAPACITY: 5.2"; SWING: 21"; TURNING DIAMETER: 27.6"; SPINDLE SPEED: 2,000 RPM; DISTANCE BETWEEN CENTERS: 62"; TURRET:12 4.5" THRU BORE; CUTTING HOURS: 13,148 HOURS; EQUIPPED WITH: CHIP CONVEYOR; TAIL STOCK)

2006 KITAMURA MYCENTER HX400IF HORIZONTAL MACHINING CENTER CNC CONTROL: FANUC 16I-MB SPINDLE SPEED: 13,000 RPM SPINDLE TAPER: BT 40 TOOL CHANGER: 50 ATC PALLET SIZEL 15.7" X 15.7" EQUIPPED WITH: FANUC 16IMB CONTROL CHIP CONVEYOR THRU SPINDLE COOLANT TOMBSTONES & BASE AND 2 BOXES OF TOOL HOLDERS INCLUDED

ALLSTEEL 65 PRESS BRAKE TONNAGE: 65 LENGTH: 8' DISTANCE BETWEEN HOUSINGS: 78" STROKE 6" S/N: 6762 480 V 3 PH EQUIPPED WITH: CNC 150 AUTOGAUGE

1996 KURAKI KBT-10DX HORIZONTAL BORING MILL SPINDLE DIAMETER: 3.94" SPINDLE TAPER: ISO NO. 50 SPINDLE SPEEDS (3 STEP GEAR CHANGE): 5-2000 RPM SPINDLE HEAD VERTICAL TRAVEL (Y): 39.37" TABLE LONGITUDINAL TRAVEL (X): 59.06" TABLE CROSS TRAVEL (Z): 31.5" SPINDLE CENTER TO TABLE SURFACE: 0-39.37" SPINDLE AXIAL TRAVEL (W): 19.69" TABLE SIZE: 37.40" X 43.31" AUTOMATIC TABLE INDEXING: .001 DEGREE FEED RATE (X, Y, Z & W): 0.04-157.48 IPM RAPID TRAVERSE - X, Y & Z: 472.44 IPM W: 236.22 IPM RAPID TABLE ROTARY SPEED: 1.2 RPM SPINDLE MOTOR: AC 15 HP FEED FOR X, Y, Z & W AXIS: AC 4.0 HP TABLE ROTATION: AC 2.4 HP HYDRAULIC PUMP MOTOR: AC 2.0 HP SPINDLE LUBRICATION: AC 0.13 HP SLIDE WAYS LUBRICATION: AC 0.08 HP SPIRAL CHIP CONVEYOR: AC 0.53 HP ELECTRIC POWER SOURCE VOLTAGE: AC200/220V +/- 10% 50/60 HZ +/-1% CAPACITY: 40 KVA MACHINE HEIGHT: 129.92" FLOOR SPACE: 183.07" X 151.57" MACHINE WEIGHT: 25,960 LBS EQUIPPED WITH: FLOOD COOLANT COIL TYPE CHIP CONVEYOR SPINDLE OIL COOLER CHIP COVER FOR SLIDE WAY SPINDLE SPEED METER & LOAD METER PROGRAMMABLE INDEX AT .001 DEGREE WITH LOCATION PIN AT 90 DEGREES MANUAL PULSE GENERATOR POWER SHUTOFF DEVICE MANUAL SPINDLE SETTING DEVICE MONOLEVER TYPE JOG FEED SELF DIAGNOSIS FUNCTION DOOR INTERLOCK ON EC BOX

1997 HAAS VF-3 CNC MILL X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 710 IPM RAPID RATE Y AXIS: 710 IPM RAPID RATE Z AXIS: 710 IPM TABLE SIZE: 48" X 18" MAX TABLE LOAD: 3,500 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 8,100 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 20 ATC MAX TORQUE 90 FT-LBF MAX CUTTING 650 IPM MAX THRUST X 2550 LBF MAX THRUST Y 2550 LBF MAX THRUST Z 4200 LBF MAX TOOL DIAMETER 3.5" MAX TOOL WEIGHT 12 LBS TOOL-TO-TOOL 4.2 S CHIP-TO-CHIP 4.5 S DIMENSIONS: 131" X 92" X 102" WEIGHT: 11,720 LBS

1998 HAAS VF-2 CNC MILL X-AXIS TRAVEL 30" Y-AXIS TRAVEL 16" Z-AXIS TRAVEL 20" SPINDLE SPEED 7,500 RPM SPINDLE TAPER CAT 40 TOOL MAGAZINE CAPACITY 20 ATC CONTROL HAAS CNC EQUIPPED WITH: CHIP REMOVAL CHIP AUGER

1994 HAAS VF-2 CNC MILL X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 16" Z-AXIS TRAVEL: 20" SPINDLE SPEED:7,500 RPM SPINDLE TAPER: CAT 40 TOOL MAGAZINE CAPACITY:20 ATC CONTROL: HAAS CNC EQUIPPED WITH: EQUIPMENT MANUALS HAND PENDANT CHIP REMOVAL CHIP AUGER

2000 MORI SEIKI SH-403 HORIZONTAL MACHINING CENTER MAX TOOL DIAMETER: 4.9" 12,000 RPM SPINDLE PALLET SIZE 15.7" X 15.7" X - AXIS TRAVEL 22.0" Y - AXIS TRAVEL 20.0" Z - AXIS TRAVEL 20.0" B - AXIS 1 DEG MAX. TABLE LOAD 1,100 LBS. TABLE INDEXING 1 DEG B-AXIS TIME 2.0 SEC SPINDLE SPEED RANGE 12,000 RPM RAPID TRAVERSE RATE 1600 IPM SPINDLE TAPER #40 SPINDLE MOTOR 30 HP AC AUTO TOOL CHANGER 60 TOOL CHANGE TIME(TOOL-TOOL) 1.3 SEC PALLET CHANGE TIME 6 SECONDS FLOOR SPACE 112.6 X 160.2 X 99.1 MACHINE WEIGHT 22,800 LBS EQUIPPED WITH: MSG-501 FANUC 18I CONTROL WITH CAPPS 12,000 RPM SPINDLE ]60 TOOL ATC THRU SPINDLE COOLANT CHIP CONVEYOR

1996 OKK VM4 VERTICAL MACHINING CENTER WEIGHT: 5500 (KG) KG NUMBER OF TOOLS: 20 MAIN MOTOR POWER: 7.5 (KW) KW TABLE SIZE: 800MM X 400MM TRAVELS : 800MM X 400 X 400 OKK ALPHA FANUC 18M VERSION B

STRIPPIT SUPER 30 PUNCH PRESS THROAT DEPTH: 30" TONNAGE: 30 TABLE SIZE: 64" X 30" 1/4" MILD STEEL CAPACITY AMPS: 4.0 VOLTS: 220 PHASE: 3 CYCLE: 60 EQUIPPED WITH: FULL GAUGING SYSTEM AC DRIVE 1.25" TOOL HOLDER

1994 HITACHI SEIKI HT40G CNC LATHE CHUCK SIZE 15" BAR CAPACITY 4" SWING 39.4" TURNING DIAMETER 24.4" SPINDLE SPEED 2,000 RPM CONTROL SEICOS A10L DISTANCE BETWEEN CENTERS 43.3" TURRET 12 STATION LENGTH:3.800 MM WIDTH:2.420 MM HEIGHT:2.060 MM WEIGHT:12.000 KG EQUIPPED WITH: TOOL PRESETTER TAILSTOCK CHIP CONVEYOR

1985 OKUMA LC20-M CNC LATHE CONTROL: OSP 5000 L CAPACITIES: SWING OVER BED: 15.75 MAXIMUM TURNING DIAMETER: 11.81 MAXIMUM TURNING LENGTH: 18.12 TRAVELS: X-AXIS (UPPER TURRET): 6.30 X-AXIS (LOWER TURRET): 4.33 Z-AXIS (UPPER/LOWER TURRET): 20.47 SPINDLE: CHUCK DIAMETER: 10 SPINDLE NOSE: A2-6 HOLE THRU CHUCK DRAW TUBE: 1-11/16 HOLE THRU CHUCK: 2-9/16 SPINDLE SPEEDS: 15 TO 3,500 RPM TAILSTOCK: CENTER TAPER: #5 MORSE TAPER QUILL DIAMETER: 3.5 QUILL TRAVEL: 12 APPROX. GENERAL: ELECTRICAL: 220 / 440 VOLT, THREE PHASE OVERALL DIMENSIONS: 180 X 95 X 95 TALL

1981 DAHLIH DL-GH2200 VERTICAL AND HORIZONTAL MILL TABLE WORKING SURFACE: 13-1/4" X 51-1/8" RANGE: LONGITUDINAL34" CROSS: 12" VERTICAL (KNEE): 16" TAPER IN HORIZONTAL SPINDLE: N.S.T. 40 HORIZONTAL SPINDLE SPEEDS: (9) 90 - 1400 RPM LONGITUDINAL & CROSS FEEDS: (12)..6" - 28 IPM TAPER IN VERTICAL SPINDLE: N.S.T. 40 QUILL TRAVEL: 6". POWER FEEDS: (3) 0.0014, 0.0028, 0.0056 IPR HEAD SWIVELS: 45O INF VAR VERT SPINDLE SPEEDS: 80 - 3800 RPM HORIZ TRAVEL OF RAM: 20" SWIVEL OF RAM: 360O APPROX WEIGHT: 5,500 LBS. APPROX DIMENSIONS: 75" L-R X 83" F-B X 93-1/2"H EQUIPPED WITH: VARI-SPEED VERTICAL HEAD MOUNTED ON SWIVEL RAM ACCURITE X & Y AXIS DIGITAL READOUT FAGOR Z AXIS DIGITAL READOUT TAPPING HORIZONTAL SPINDLE POWER RAPID TRAVERSE POWER ELEVATION OF KNEE COOLANT SWING PENDANT CONTROL ARBOR SUPPORT 40 TAPER ARBOR 3 H.P. VERTICAL SPINDLE DRIVE 5 H.P. HORIZONTAL SPINDLE DRIVE

1985 OKUMA LC40 CNC LATHE CONTROL: OSP 5000L MAXIMUM SWING OVER BED 23.62 MAXIMUM TURNING DIAMETER 21.65 MAXIMUM TURNING LENGTH 28.74 SPINDLE CAPACITY 3.54 SPINDLE SPEED 2,500 RPM MAX. SPINDLE MOTOR 60 HP 12 TOOLS UPPER TURRET 8 TOOLS LOWER TURRET LONG. TRAVEL, UPPER TURRET 41.34 CROSS TRAVEL, UPPER TURRET 11.81 LONG. TRAVEL, LOWER TURRET 39.96 CROSS TRAVEL, LOWER TURRET 6.69 MACHINE WEIGHT APPROXIMATELY 22,000 LB.

2014 MAZAK VCU 500C 3X VERTICAL MACHINING CENTER TABLE SIZE 19.68 X 39.37 MAXIMUM WORKPIECE SIZE 35.43 X 19.68 MAXIMUM WORKPIECE HEIGHT 12.00 X-AXIS TRAVEL 39.37 Y-AXIS TRAVEL 19.88 Z-AXIS TRAVEL 20.07 TABLE SURFACE HEIGHT 31.49 MAXIMUM TABLE WEIGHT CAPACITY 1322 LBS OPTIONAL SPINDLE SPEED / MOTOR (30MIN) 12,000 RPM / 15 HP SPINDLE TAPER CT40 RAPID TRAVERSE (X,Y,Z) 945 IPM NUMBER OF TOOLS 30 MAXIMUM TOOL DIAMETER (ADJACENT TOOLS) 3.15 MAXIMUM TOOL DIAMETER ( NO ADJACENT TOOLS) 4.92 MAXIMUM TOOL LENGTH 10.23 TOOL SHANK TYPE CAT #40 MACHINE HEIGHT 131.81 FLOOR SPACE (W X L) 108.26 X 125 MAZATROL SMART CONTROL

2006 LEADWELL LTC-25BL CNC LATHE CAPACITY MAXIMUM SWING: 680 MM MAXIMUM TURNING DIAMETER: 420 MM TURNING LENGTH: 1050 MM BAR CAPACITY: 85 MM THRU HOLE: 95MM SPINDLE CHUCK SIZE: 300 MM SPINDLE NOSE: A28 SPINDLE SPEED: 3500 RPM TRAVEL X AXIS: 210+20 MM Z AXIS: 1090 MM TURRET NUMBER OF TOOL STATION: 12 SHANK HEIGHT OF SQUARE TOOL: 25 MM SHANK DIAMETER OF BORING BAR: 40 MM FEEDRATE X AXIS RAPID TRAVERSE: 15000 MM/MIN Z AXIS RAPID TRAVERSE: 20000 MM/MIN TAILSTOCK QUILL DIAMETER: 100 MM QUILL INSIDE TAPER: M.T#5

2010 KITAMURA MYCENTER 3XIF VERTICAL MACHINING CENTER CNC CONTROL: FANUC 16I-MB X-AXIS TRAVEL 30" Y-AXIS TRAVEL 17.9" Z-AXIS TRAVEL 18.1" SPINDLE SPEED 20,000 RPM SPINDLE TAPER - CAT 40 TOOL MAGAZINE CAPACITY - 30 ATC EQUIPPED WITH: CONTROL FANUC 16I-MB 20000 RPM SPINDLE 40 TAPER HIGH SPEED TOOL CHANGER 30 TOOL ATC (SIDE) WASHDOWN COOLANT 2 PALLETS

2018 AUTOMATE CNC FLASH FL300 CNC LATHE X AXIS TRAVEL: 13.8" Z AXIS TRAVEL: 11.8" X/Z AXIS RAPID TRAVERSE: 25/15M/MIN (49.2FT/82FT/MIN) MAXIMUM SWING DIAMETER: 11.8" MAXIMUM TURNING DIAMETER: 7.87" MAXIMUM TURNING LENGTH: 11.8" MAX. SWING DIA. OVER SLIDE: 4.72" CHUCK SIZE: 6" BAR CAPACITY: 1.57" MAXIMUM SPINDLE SPEED: 4,500 RPM MACHINE DIMENSIONS: 67" X 47" X 61" MACHINE WEIGHT: 3,968LBS VOLTAGE: 380V POWER CAPACITY: 9KVA EQUIPPED WITH: 4500 RPM, WIRED FOR 4TH AXIS WITH C AND Y AXIS, LIVE TOOLING, 808D SIEMENS CONTROL, STATIC AND LIVE TOOLING, GUIDE BUSHINGS,

2001 MAZAK 6300 MULTI-PLEX MULTI-SPINDLE LATHE MAXIMUM SWING.......................................... 16.93 STANDARD CUTTING DIAMETER........................... ..13.0 MAXIMUM CUTTING DIAMETER.............................16.93 MAXIMUM CUTTING LENGTH CHUCKWORK............... 8.86 MAXIMUM CUTTING LENGTH SHAFTWORK............... ..25.59 MAIN SPINDLE (L&R) DISTANCE BETWEEN SPINDLE FACES: MAX.(BOTH HEADS @ HOME POSITION)............... 57.09 MIN...................................................... ......9.82 SPINDLE NOSE.............................................. A2-8 SPINDLE BORE............................................... 3.46 MAXIMUM BAR DIAMETER.................................3.0 SPINDLE SPEED/RANGES.................................4,000 RPM/1 SPINDLE INDEXING (C-AXIS)..............001 DEG./360,000 POSITIONS SPINDLE HORSEPOWER (30 MIN.).........................30 HP (AC) SPINDLE TORQUE............................................441.34 FT.-LBS. TURRET (L&R) TYPE OF TURRETS........................... DODECAGONAL/DRUM NON-LIFT TOOL HOLDER SHANKS...................................... MODIFIED VDI TURRET INDEX TIME (1 STEP)............................. 0.3 SEC. TOTAL NUMBER OF TOOLS: (ROTARY AVAIL./ALL POSITIONS).................... ........24 (12) TOOL SIZE: TURNING & FACING..................................... .....1 X 1 BORING BAR MAXIMUM DIAMETER.................. ......2 MILL SPINDLE (L&R) SPINDLE SPEED.............................................. 4,000 RPM SPINDLE HORSEPOWER (10 MIN).......................... 10 HP (A.C.) SPINDLE TORQUE (4000 RPM)............................ 57.88 FT.-LBS. MAXIMUM DRILL.............................................. 7/8 MAXIMUM END MILL......................................... 13/16 MAXIMUM TAP............................................... 8- 5/8 UNC AXIS TRAVEL: X-AXIS (L&R).................................................12.2 Z-AXIS (L&R)..................................................23.82 RAPID TRAVERSE: X-AXIS..........................................................945 IPM Z-AXIS..........................................................945 IPM C-AXIS.........................................................400 RPM GL200F GANTRY ROBOT SPECIFICATIONS: ROBOT MAXIMUM WORKPIECE WEIGHT...........................44 LBS. X 2 BODY TRAVERSE SPEED....................................4728 IPM ARM UP/DOWN SPEED.....................................2364 IPM CONTROLLER TYPE........................................................MAZATROL FUSION 640 TEACHING METHOD........................TEACHING-LESS, FIXED PATTERN MEMORY CAPACITY..................NO LIMIT ON NUMBER OF PROGRAMS HAND TYPE.............................................D3 (STD) TYPE OF WORKPIECE......................................ROUND CHUCK WORK CONSTRUCTION.............................................DOUBLE HAND GRIPPING................................................... 3-JAW CENTRIPETAL WORKPIECE.................................................11.81DIA. X 5.91L/44 LBS.X 2 TYPE III PITCH FEED CONVEYOR NUMBER OF PALLETS........................................6 TYPE OF WORKPIECE.......................................CHUCKWORK EQUIPPED WITH: MAZATROL PC-FUSION 640T CNC CONTROL N-EIA/ISO OPTION PACKAGE PCMCIA INTERFACE (1-SLOT) NETWORK INTERFACE (FOR LAN & MODEM) YES. MAIN SPINDLE MOTOR 30 HP L&R SPINDLE SPEED 4000 RPM L&R C-AXIS 0.001 DEGREE INCR. L&R 12 POSITION DRUM TURRET (VDI STRT. SHANK) ROTARY-TOOL SPINDLE SPEED 4000 RPM L&R / 57.88 FT-LBS AUTOMATIC TOOL EYE L&R MILLING SPINDLE SYNCHRONOUS TAPPING L&R RELOCATION DEVICE WINDOWS 2000 OPERATING SYSTEM FOR MAZAK MACHINE CONTROL OVERLOAD DETECTOR L&R AUTO POWER ON/OFF + WARM-UP CHUCK AIR BLAST L&R TURRET AIR BLAST L&R AIR BLOW FOR WORK TRANSFER CHIP CONVEYOR REAR DISPOSAL (HINGE TYPE) AUTO PECKING CYCLE WITH LOAD DETECTION GL200F/PITCH-FEED TYPE 3/D2-HAND

2010 MAZAK SUPER QUADREX 200 CNC LATHE MAX SWING: 14.6" MAX. MACHINING DIAMETER: 13.5" NO. OF TURRETS: 2 TOOL POSITIONS ON TURRET: 12+12 X1 AND X2 AXIS TRAVEL: 8.2" Z1 AND Z2 AXIS TRAVEL: 48.25" CHUCK ON MAIN AND SUB SPINDLE: 8" SPINDLE THRU HOLE: 2.55"

2010 LEADWELL T6 CNC LATHE BAR CAPACITY:2 INCH AXIS:2 POWER:17.7 HP MAX RPM:4500 RPM TURNING DIA:8.3 INCH SWING:17.7 INCH MACHINING LENGTH:16.5 INCH TAILSTOCK:YES DIMENSIONS:98INCH X 77INCH X 94INCH

2007 LNS EXPRESS 332 BAR FEEDER (TYPE: BAR FEED) MINIMUM BAR STOCK LENGTH: 27.5" MINIMUM REMNANT LENGTH: 4" MAXIMUM REMNANT LENGTH: 15.75" MAXIMUM DIAMETER: 1.3" MINIMUM DIAMETER: 0.12" (3 MM) LOADING CYCLE: 35-40 SEC 480 V EQUIPPED WITH: CAPACITY: 1.26" LENGTH: 12' 11, 17, 23, 29, 37MM CHANNELS ASSORTMENT OF PUSHER COLLETS WEIGHT: 3,600LBS.