Well Maintained CNC and Manual Machine Tools and Equipment Surplus to the Continuing Operations of a Major Oilfield Services Company
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
73
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2014 |
2014 40" X 120" MODERN HOLLOW SPINDLE LATHE WITH 14" HOLE S/N: 14111235 SWING OVER BED: 40" SWING OVER CROSS SLIDE: 29" SWING OVER GAP: 57" DISTANCE BETWEEN CENTERS: 120" SPINDLE BORE: 14" SPINDLE MOTOR: 30 HP SPINDLE SPEEDS: 3 - 320 EQUIPPED WITH: TAPER TURNING ATTACHMENT FRONT AND REAR 4-JAW CHUCKS NEWALL DRO VARIABLE SPEED HEADSTOCK WITH RPM INDICATOR RAPID TRAVERSE INCH/METRIC THREADING TWO SPEED TAILSTOCK NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | ||
|
|
2010 | SUMMIT | 3A-42120314 |
2010 SUMMIT 3A-42120314 42" X 120" 14" HOLLOW SPINDLE LATHE S/N: 10119 SWING OVER BED: 41.7" SWING OVER CROSS SLIDE: 29.5" SWING OVER GAP: 63" DISTANCE BETWEEN CENTERS: 120" SPINDLE SPEEDS: 3 - 200 RPM SPINDLE MOTOR: 30 HP HOLE THROUGH SPINDLE: 14.1" SPINDLE NOSE: A2-20 SHIPPING WEIGHT: 21,000 LBS. EQUIPPED WITH: TAPER ATTACHMENT FRONT AND REAR 4-JAW CHUCKS NEWALL DRO SEMI AUTO THREADING - KICK OUT BORING BAR LOADER WITH BORING BAR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2014 | HAAS | ST-45L |
2014 HAAS ST-45L CNC TURNING CENTER S/N: 3098255 SWING OVER APRON: 34.5" SWING OVER CROSS SLIDE: 25.5" MAXIMUM CUTTING LENGTH: 80" MAXIMUM CUTTING DIAMETER: 25.5" SPINDLE BORE: 7" EQUIPPED WITH: HAAS CNC CONTROL 20" 4-JAW CHUCK HYDRAULIC STEADY REST TAILSTOCK NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2012 | HARDINGE-BRIDGEPORT | GX 1600 |
2012 HARDINGE-BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER (19646) S/N: GXEB210025 TABLE SIZE: 63.9" X 27.5" MAXIMUM WORK PIECE WEIGHT: 3300 LBS. X AXIS TRAVEL: 63" Y AXIS TRAVEL: 27.5" Z AXIS TRAVEL: 25" SPINDLE NOSE TO TABLE: 6.1" - 31.1" SPINDLE SPEEDS: 6,000 RPM SPINDLE MOTOR: 30 HP SPINDLE TAPER: #50 TOOL CHANGE TIME (C-C): 4.5 SEC. MAXIMUM TOOL LENGTH: 13.7" MAXIMUM TOOL DAIMETER: 5.9" MAXIMUM TOOL WEIGHT: 17.6 LBS. FEED RATE (X / Y / Z): 472 IPM RAPID TRAVERSE (X / Y / Z): 1417 IPM OAD (APPROXIMATE): 153" X 107" X 113" HIGH WEIGHT (APPROXIMATE): 21,560 LBS. EQUIPPED WITH: FANUC 0I-MD CNC CONTROL TSUDAKOMA MODEL RBA-320R 4TH AXIS ROTARY TABLE WITH 6-JAW CHUCK 32 TOOL ATC OIL CHILLER CHAIN TYPE CHIP CONVEYOR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2007 | HAAS | SL-40LB |
2007 HAAS SL-40LB CNC TURNING CENTER S/N: 3078372 SPINDLE BORE: 7.08" SWING DIAMETER: 40" SWING OVER CROSS SLIDE: 25" DISTANCE BETWEEN CENTERS: 89" MAXIMUM CUTTING DIAMETER: 25.5" MAXIMUM CUTTING LENGTH: 80" SPINDLE SPEED: 1,400 RPM SPINDLE MOTOR (HIGH PERFORMANCE OPTION): 55 HP MACHINE DIMENSIONS: 234" LONG, 96" WIDE APPROXIMATE MACHINE WEIGHT: 32,000 LBS EQUIPPED WITH: HAAS CNC CONTROL 20" 4-JAW HYDRAULIC CHUCK 10 STATION TURRET TOOL PRESETTER EXTRA PERFORMANCE OPTION 55 HP SPINDLE MOTOR PROGRAMMABLE HYDRAULIC TAILSTOCK HYDRAULIC STEADY REST CHIP CONVEYOR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2011 | HARDINGE-BRIDGEPORT | GX 1600 |
2011 HARDINGE-BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER (19647) S/N: GXEB1A0002 TABLE SIZE: 63.9" X 27.5" MAXIMUM WORK PIECE WEIGHT: 3300 LBS. X AXIS TRAVEL: 63" Y AXIS TRAVEL: 27.5" Z AXIS TRAVEL: 25" SPINDLE NOSE TO TABLE: 6.1" - 31.1" SPINDLE SPEEDS: 6,000 RPM SPINDLE MOTOR: 30 HP SPINDLE TAPER: #50 TOOL CHANGE TIME (C-C): 4.5 SEC. MAXIMUM TOOL LENGTH: 13.7" MAXIMUM TOOL DAIMETER: 5.9" MAXIMUM TOOL WEIGHT: 17.6 LBS. FEED RATE (X / Y / Z): 472 IPM RAPID TRAVERSE (X / Y / Z): 1417 IPM OAD (APPROXIMATE): 153" X 107" X 113" HIGH WEIGHT (APPROXIMATE): 21,560 LBS. EQUIPPED WITH: FANUC 0I-MD CNC CONTROL TSUDAKOMA MODEL RBA-320R 4TH AXIS WITH 12" SETRITE 3-JAW SCROLL CHUCK 32 TOOL ATC CHAIN TYPE CHIP CONVEYOR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2007 | HAAS | SL-40LB |
2007 HAAS SL-40LB CNC TURNING CENTER S/N: 3078371 SWING OVER BED: 40" SWING OVER CROSS SLIDE: 25" DISTANCE BETWEEN CENTERS: 89" MAXIMUM CUTTING DIAMETER: 25.5" MAXIMUM CUTTING LENGTH: 80" SPINDLE SPEEDS: 1400 RPM SPINDLE MOTOR: 55 HP (HIGH PERFORMANCE OPTION) SPINDLE BORE: 7.08" OAD (APPROXIMATE): 234" L X 96" W WEIGHT (APPROXIMATE): 32,000 LBS. EQUIPPED WITH: HAAS CNC CONTROL 20" 4-JAW HYDRAULIC CHUCK 10 STATION TOOL TURRET TOOL PRESETTER PROGRAMMABLE TAILSTOCK HYDRAULIC STEADY REST CHIP CONVEYOR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
HAAS | SL-40LB |
HAAS SL-40LB CNC TURNING CENTER SPINDLE BORE: 7.08" SWING DIAMETER: 40" SWING OVER CROSS SLIDE: 25" DISTANCE BETWEEN CENTERS: 89" MAXIMUM CUTTING DIAMETER: 25.5" MAXIMUM CUTTING LENGTH: 80" SPINDLE SPEED: 1,400 RPM SPINDLE MOTOR (HIGH PERFORMANCE OPTION): 55 HP MACHINE DIMENSIONS: 234" LONG, 96" WIDE APPROXIMATE MACHINE WEIGHT: 32,000 LBS EQUIPPED WITH: - HAAS CNC CONTROL 20" 4-JAW HYDRAULIC CHUCK 10 STATION TURRET TOOL PRESETTER EXTRA PERFORMANCE OPTION 55 HP SPINDLE MOTOR PROGRAMMABLE HYDRAULIC TAILSTOCK HYDRAULIC STEADY REST CHIP CONVEYOR NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
LEBLOND | 24 REGAL |
26" X 144" LEBLOND MODEL 24 REGAL HOLLOW SPINDLE LATHE WITH 9" BORE S/N 7HS-711 U5451 SWING OVER BED: 26" SWING OVER CROSS SLIDE: 18.25" DISTANCE BETWEEN CENTERS: 144" SPINDLE SPEEDS: 20 - 400 RPM SPINDLE BORE: 9" EQUIPPED WITH: INCH/METRIC THREADING FRONT AND REAR 4-JAW CHUCKS RAPID TRAVERSE TAPER ATTACHMENT STEADY REST NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
2006 | RYAZAN | 1MH63H-3 |
2006 RYAZAN 1MH63H-3 ENGINE LATHE (19624) S/N: 5457 SWING OVER BED: 27.5" SWING OVER CARRIAGE: 13.7" DISTANCE BETWEEN CENTERS: 120" MAXIMUM WEIGHT BETWEEN CENTERS: 8,000 LBS. SPINDLE SPEEDS: 10 - 1250 RPM SPINDLE BORE: 4.13" TAILSTOCK TAPER: MORSE NO. 5 WEIGHT (APPROXIMATE): 12,000 LBS. EQUIPPED WITH: 20" 4-JAW CHUCK TOOL POST INCH/METRIC THREADING TAPER ATTACHMENT 4-WAY RAPID TRAVERSE STEADY REST DRO THREAD DIAL COOLANT AND PANS WORK LIGHT NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
MAZAK | INTEGREX 60X3000U ATC |
MAZAK INTEGREX 60X3000U ATC M/C CNC TURNING CENTER SWING OVER BED: 36" DISTANCE BETWEEN CENTERS: 120" SWING OVER CARRIAGE: 26" MAXIMUM TURNING DIAMETER BETWEEN CENTERS: 24" C AXIS SPINDLE INDEXING: 0.001 DEGREE ROTARY TOOL SHANK: CAT 50 ROTARY TOOL SPEEDS: 12 - 2000 RPM TOOL CHANGER CAPACITY: 30 MACHINE WEIGHT: 42,000 LBS. EQUIPPED WITH: MAZATROL T32-3 CNC CONTROL 21" HYDRAULIC CHUCK PROGRAMMABLE HYDRAULIC TAILSTOCK MISC. TOOLING S/N:107691
|
🔒 Subscribe | |
|
|
2004 | HAAS | SL-30TB |
2004 HAAS SL-30TB CNC TURNING CENTER S/N: 69011 SPINDLE BORE 4" SWING OVER BED: 30" SWING OVER CROSS SLIDE: 14.5" BETWEEN CENTERS 39" MAXIMUM CUTTING LENGTH 34" SPINDLE NOSE A2-8 SPINDLE SPEEDS, RANGE TO 2400 RPM SPINDLE MOTOR, HORSEPOWER 30 HP OVERALL DIMENSIONS, L X W 162" X 77" OVERALL HEIGHT 74" WEIGHT APPROXIMATELY16,000 LBS EQUIPPED WITH: 15" CHUCK TOOL SETTER TAILSTOCK NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
2010 | HAAS | TM-1 |
2010 HAAS TM-1 CNC TOOL ROOM MILL MACHINE S/N: 1078076 TABLE SIZE: 47.75" X 10.5" SPINDLE NOSE TO TABLE TOP: 4" - 20" X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 12" Z-AXIS TRAVEL: 16" SPINDLE SPEEDS: 0 - 4,000 RPM SPINDLE MOTOR: 7.5 HP SPINDLE TAPER: CAT # 40 ATC TOOL CAPACITY: 10 MAXIMUM TOOL DIAMETER: 3.5" MAXIMUM TOOL WEIGHT: 12 LBS. RAPID TRAVERSE: 200 IPM CUTTING FEED RATE: 200 IPM POWER: 3 PH/SINGLE PH; 208V / 240V OAD (APPROXIMATE): 85" X 69" X 109" HIGH WEIGHT (APPROXIMATE): 3,300 LBS. EQUIPPED WITH: HAAS CNC CONTROL 3.5" FLOPPY DISC DRIVE INTERFACE RS-232 PORT / DNC LINK 10 STATION ATC NOTE: PLASTIC SHIELDING REMOVED AND NOT INCLUDED WITH LOT. NOTE: MACHINE VISE NOT INCLUDED. NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
1978 | MONARCH | 220 SERIES 1214 |
1978 MONARCH 220 SERIES 1214 CNC CHUCKER WITH FANUC 0I-TD (19605) S/N: 52152 SWING OVER BED: 32" SPINDLE BORE: 9.5" EQUIPPED WITH: 24" 4-JAW CHUCK FANUC 0I-TC CNC CONTROL 6 POSITION VERTICAL TOOL TURRET NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION NOTE: EXTENSIVE TOOLING INCLUDED, BUT THE METAL TUBS CONTAINING THE TOOLING ARE NOT INCLUDED. SEE PHOTOS.
|
🔒 Subscribe |
|
|
MITTS & MERRILL | 3A-HFR-KS |
MITTS & MERRILL 3A-HFR-KS KEYSEATER MAX. KEY WAY WIDTH: 2" MAX. KEY WAY LENGTH: 24" TABLE SIZE: 24" X 24" EQUIPPED WITH: MISC. TOOLING NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
ROMI | HDL-33-20 |
ROMI HDL-33-20 ENGINE LATHE 33" X 120" SWING OVER BED: 33.5" SWING OVER CROSS SLIDE: 26" DISTANCE BETWEEN CENTERS: 120" SPINDLE SPEEDS: (15) 10 - 750 RPM SPINDLE MOTOR: 20 HP SPINDLE BORE: 4.75" LONGITUDINAL FEEDS: 0.002 - 1.378 IPR CROSS FEEDS: 0.00067 - 0.4646 IPR OAD (APPROXIMATE): 214" X 71" X 64" HIGH WEIGHT (APPROXIMATE): 15,000 LBS. EQUIPPED WITH: 28" CUSHMAN 4-JAW CHUCK, TOOLPOST, TAILSTOCK, (3) STEADY RESTS, NEWALL DRO C80 NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
NUGIER |
100 TON NUGIER STRAIGHTENING PRESS CAPACITY: 100 TONS STROKE: 14" RAM TO TABLE DISTANCE: 0" - 36" RAM SPEED ADVANCED: 33 IPM RAM SPEED NO LOAD: 19.6 IPM RAM SPEED HALF CAPACITY: 15.9 IPM RAM SPEED FULL CAPACITY: 14.3 IPM CYLINDER ROD DIAMETER: 3.25" DISTANCE BETWEEN HOUSINGS: 48" NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | ||
|
|
SCHUNK | ROTA TB-610-260 |
SCHUNK ROTA TB-610-260 3-JAW AIR CHUCK WITH 10.2" THRU-HOLE, CURRENTLY MOUNTED ON FIXTURE S/N: NA
|
🔒 Subscribe | |
|
|
SCHUNK | ROTA NC 900-230 |
SCHUNK ROTA NC 900-230 36" SCHUNK 3-JAW HYDRAULIC CHUCK MODEL ROTA NC 900-230, WITH DRAW CYLINDER S/N: 19663
|
🔒 Subscribe | |
|
|
SMW | BIG BORE 800/365 |
SMW BIG BORE 800/365 32" 3-JAW FRONT MOUNT AIR CHUCK WITH 14.3" THRU-HOLE, S/N: 079002
|
🔒 Subscribe | |
|
|
CUSHMAN | 6-JAW AIR CHUCK |
CUSHMAN 6-JAW AIR CHUCK WITH 13" HOLE, A2-20 MOUNT, WITH CYLINDER S/N: 19684
|
🔒 Subscribe | |
|
|
BRIDGEPORT |
BRIDGEPORT VERTICAL MILLING MACHINE WITH VARIABLE SPEED HEAD S/N 49464, 49" X 9" O/A TABLE, 41" X 9" WORK-AREA, BALLSCREW MACHINE, AUTO FEEDER.
|
🔒 Subscribe | ||
|
|
SCHUNK | ROTA NCO 800 |
SCHUNK ROTA NCO 800 32" SCHUNK 3-JAW HYDRAULIC CHUCK MODEL ROTA NCO 800, WITH DEDICATED HYDRAULIC UNIT AND DRAW CYLINDER. S/N: 19664
|
🔒 Subscribe | |
|
|
H. ERNAULT-SOMUA | Z3CBH7 |
H. ERNAULT-SOMUA Z3CBH7 [HES] VERTICAL/HORIZONTAL MILLING MACHINE S/N: 105270/11 TABLE SIZE: 11.8" X 47.2" X AXIS TRAVEL: 27.5" Y AXIS TRAVEL: 13.8" Z AXIS TRAVEL: 29.5" SPINDLE MOTOR: 4 HP EQUIPPED WITH: 3 AXIS DRO OVERARM NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
1979 | IKEGAI | FX25N |
1979 IKEGAI FX25N CNC CHUCK LATHE WITH 10" CHUCK S/N: 22390T SWING OVER BED: 25" EQUIPPED WITH: GE FANUC SERIES 0-T CNC CONTROL 10" 3-JAW CHUCK 6 STATION TOOL TURRET NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
COFFING |
2 TON JIB CRANE WITH 2 TON COFFING HOIST FLOOR MOUNT, 5 FT. DIA. BASE, COLUMN 239 TALL, O/A ARM 19 FT., DISTANCE TO STOP 15 9-1/2.
|
🔒 Subscribe | ||
|
|
1978 | IKEGAI | FX20N |
1978 IKEGAI FX20N CNC CHUCKING LATHE WITH 8" CHUCK (19613) S/N: 21507T MAXIMUM TURNING DIAMETER: 10.2" MAXIMUM TURNING LENGTH: 12" MAXIMUM TOOL LENGTH FROM TURRET CENTER: 14" SPINDLE SPEEDS: 100 - 3500 RPM SPINDLE MOTOR: 10 HP SPINDLE BORE: 2" SPINDLE NOSE: A1-6 EQUIPPED WITH: FANUC 0-T CNC CONTROL 8" 3-JAW CHUCK NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
|
|
WELLSAW | 1016 |
WELLSAW 1016 HORIZONTAL BANDSAW ROUND CAPACITY: 10.5" RECTANGULAR CAPACITY, 90 DEGREES: 10" X 16" RECTANGULAR CAPACITY, 45 DEGREES: 10" X 9" FLAT CAPACITY: 16.5" BLADE SIZE: 1" X 0.035" X 138" BLADE SPEEDS: (4) 50 - 275 SFPM BLADE MOTOR: 2 HP FLOOR SPACE: 84" X 40" WEIGHT (APPROXIMATE): 900 LBS. NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |
|
|
BETA II RATIOTROL | RBAZ |
28" 4TH AXIS WITH 20" NOBLE 4-JAW CHUCK, 10" THRU HOLE WITH BETA II RATIOTROL MODEL RBAZ VARIABLE SPEED ROTATION.
|
🔒 Subscribe | |
|
|
19667B |
3-JAW SCROLL CHUCK WITH 9-5/8" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667B)
|
🔒 Subscribe | ||
|
|
19667A |
24" 3-JAW SCROLL CHUCK WITH 9.75" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667A)
|
🔒 Subscribe | ||
|
|
1/2 TON JIB CRANE CAPACITY: 1/2 TON STOP TO STOP LENGTH: 151" OVERALL LENGTH: 184" COLUMN HEIGHT: 119" NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |||
|
|
19667C |
24" 3-JAW SCROLL CHUCK WITH 10" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667C)
|
🔒 Subscribe | ||
|
|
3-JAW SCROLL CHUCK WITH 9.25" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT
|
🔒 Subscribe | |||
|
|
19667D |
3-JAW SCROLL CHUCK WITH 9.75" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667D)
|
🔒 Subscribe | ||
|
|
ROTARY TABLE WITH 8" STRONG 3-JAW CHUCK
|
🔒 Subscribe | |||
|
|
ASSORTED SIZE CENTERS
|
🔒 Subscribe | |||
|
|
MOTORIZED INFEED UNIT LENGTH: 256" HEIGHT: 53" S/N: 288352_0
|
🔒 Subscribe | |||
|
|
MOTORIZED INFEED UNIT LENGTH: 256" HEIGHT: 53" S/N: 287415
|
🔒 Subscribe | |||
|
|
MOTORIZED INFEED UNIT LENGTH: 256" HEIGHT: 50" S/N: 288352 NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |||
|
|
MOTORIZED INFEED UNIT LENGTH: 256" HEIGHT: 50" S/N: NA
|
🔒 Subscribe | |||
|
|
SOFT AND HARD JAWS WITH ACCESSORIES.
|
🔒 Subscribe | |||
|
|
IKEGAI |
TOOLING FOR IKEGAI LATHE
|
🔒 Subscribe | ||
|
|
1/2 TON JIB CRANE CAPACITY: 1/2 TON STOP TO STOP LENGTH: 150" OVERALL LENGTH: 181" COLUMN HEIGHT: 92" NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |||
|
|
2 TON JIB CRANE - COLUMN ONLY; 227" TALL, FLOOR MOUNT 5' DIA
|
🔒 Subscribe | |||
|
|
(1) BORING BAR HOLDER AND BAR 10-3/4" X 9" WITH BORING BAR 3-1/4" DIA X 76-1/2" L; (1) BORING BAR 4-1/4" DIA X 76" L
|
🔒 Subscribe | |||
|
|
1/2 TON JIB CRANE CAPACITY: 1/2 TON BOOM LENGTH: 109" STOP TO STOP LENGTH: 90" COLUMN: 56" OVERALL: 64" NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe | |||
|
|
3-JAW CHUCK WITH 4" THRU HOLE, CAM LOCK MOUNT, 1-PC JAWS
|
🔒 Subscribe | |||
|
|
ROTARY TABLE, T-SLOTTED
|
🔒 Subscribe | |||
|
|
1/2 TON JIB CRANE CAPACITY: 1/2 TON BOOM LENGTH: 90" STOP TO STOP LENGTH: 108" COLUMN: 56" COLUMN OVERALL: 64" NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION.
|
🔒 Subscribe |
2014
METALWORKING & FABRICATION EQUIPMENT
2014 40" X 120" MODERN HOLLOW SPINDLE LATHE WITH 14" HOLE S/N: 14111235 SWING OVER BED: 40" SWING OV...
Hammer Price:
🔒
2010 SUMMIT 3A-42120314
METALWORKING & FABRICATION EQUIPMENT
2010 SUMMIT 3A-42120314 42" X 120" 14" HOLLOW SPINDLE LATHE S/N: 10119 SWING OVER BED: 41.7" SWING O...
Hammer Price:
🔒
2014 HAAS ST-45L
CNC MACHINE CENTERS
2014 HAAS ST-45L CNC TURNING CENTER S/N: 3098255 SWING OVER APRON: 34.5" SWING OVER CROSS SLIDE: 25....
Hammer Price:
🔒
2012 HARDINGE-BRIDGEPORT GX 1600
CNC MACHINE CENTERS
2012 HARDINGE-BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER (19646) S/N: GXEB210025 TABLE SIZE: 6...
Hammer Price:
🔒
2007 HAAS SL-40LB
CNC MACHINE CENTERS
2007 HAAS SL-40LB CNC TURNING CENTER S/N: 3078372 SPINDLE BORE: 7.08" SWING DIAMETER: 40" SWING OVER...
Hammer Price:
🔒
2011 HARDINGE-BRIDGEPORT GX 1600
CNC MACHINE CENTERS
2011 HARDINGE-BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER (19647) S/N: GXEB1A0002 TABLE SIZE: 6...
Hammer Price:
🔒
2007 HAAS SL-40LB
CNC MACHINE CENTERS
2007 HAAS SL-40LB CNC TURNING CENTER S/N: 3078371 SWING OVER BED: 40" SWING OVER CROSS SLIDE: 25" DI...
Hammer Price:
🔒
HAAS SL-40LB
CNC MACHINE CENTERS
HAAS SL-40LB CNC TURNING CENTER SPINDLE BORE: 7.08" SWING DIAMETER: 40" SWING OVER CROSS SLIDE: 25"...
Hammer Price:
🔒
LEBLOND 24 REGAL
METALWORKING & FABRICATION EQUIPMENT
26" X 144" LEBLOND MODEL 24 REGAL HOLLOW SPINDLE LATHE WITH 9" BORE S/N 7HS-711 U5451 SWING OVER BED...
Hammer Price:
🔒
2006 RYAZAN 1MH63H-3
METALWORKING & FABRICATION EQUIPMENT
2006 RYAZAN 1MH63H-3 ENGINE LATHE (19624) S/N: 5457 SWING OVER BED: 27.5" SWING OVER CARRIAGE: 13.7"...
Hammer Price:
🔒
MAZAK INTEGREX 60X3000U ATC
CNC MACHINE CENTERS
MAZAK INTEGREX 60X3000U ATC M/C CNC TURNING CENTER SWING OVER BED: 36" DISTANCE BETWEEN CENTERS: 12...
Hammer Price:
🔒
2004 HAAS SL-30TB
CNC MACHINE CENTERS
2004 HAAS SL-30TB CNC TURNING CENTER S/N: 69011 SPINDLE BORE 4" SWING OVER BED: 30" SWING OVER CROSS...
Hammer Price:
🔒
2010 HAAS TM-1
CNC MACHINE CENTERS
2010 HAAS TM-1 CNC TOOL ROOM MILL MACHINE S/N: 1078076 TABLE SIZE: 47.75" X 10.5" SPINDLE NOSE TO TA...
Hammer Price:
🔒
1978 MONARCH 220 SERIES 1214
CNC MACHINE CENTERS
1978 MONARCH 220 SERIES 1214 CNC CHUCKER WITH FANUC 0I-TD (19605) S/N: 52152 SWING OVER BED: 32" SPI...
Hammer Price:
🔒
MITTS & MERRILL 3A-HFR-KS
METALWORKING & FABRICATION EQUIPMENT
MITTS & MERRILL 3A-HFR-KS KEYSEATER MAX. KEY WAY WIDTH: 2" MAX. KEY WAY LENGTH: 24" TABLE SIZE: 24" ...
Hammer Price:
🔒
ROMI HDL-33-20
METALWORKING & FABRICATION EQUIPMENT
ROMI HDL-33-20 ENGINE LATHE 33" X 120" SWING OVER BED: 33.5" SWING OVER CROSS SLIDE: 26" DISTANCE B...
Hammer Price:
🔒
NUGIER
PRESSES & FORMING
100 TON NUGIER STRAIGHTENING PRESS CAPACITY: 100 TONS STROKE: 14" RAM TO TABLE DISTANCE: 0" - 36" RA...
Hammer Price:
🔒
SCHUNK ROTA TB-610-260
METALWORKING & FABRICATION EQUIPMENT
SCHUNK ROTA TB-610-260 3-JAW AIR CHUCK WITH 10.2" THRU-HOLE, CURRENTLY MOUNTED ON FIXTURE S/N: NA...
Hammer Price:
🔒
SCHUNK ROTA NC 900-230
METALWORKING & FABRICATION EQUIPMENT
SCHUNK ROTA NC 900-230 36" SCHUNK 3-JAW HYDRAULIC CHUCK MODEL ROTA NC 900-230, WITH DRAW CYLINDER S/...
Hammer Price:
🔒
SMW BIG BORE 800/365
METALWORKING & FABRICATION EQUIPMENT
SMW BIG BORE 800/365 32" 3-JAW FRONT MOUNT AIR CHUCK WITH 14.3" THRU-HOLE, S/N: 079002...
Hammer Price:
🔒
CUSHMAN 6-JAW AIR CHUCK
METALWORKING & FABRICATION EQUIPMENT
CUSHMAN 6-JAW AIR CHUCK WITH 13" HOLE, A2-20 MOUNT, WITH CYLINDER S/N: 19684...
Hammer Price:
🔒
BRIDGEPORT
METALWORKING & FABRICATION EQUIPMENT
BRIDGEPORT VERTICAL MILLING MACHINE WITH VARIABLE SPEED HEAD S/N 49464, 49" X 9" O/A TABLE, 41" X 9"...
Hammer Price:
🔒
SCHUNK ROTA NCO 800
METALWORKING & FABRICATION EQUIPMENT
SCHUNK ROTA NCO 800 32" SCHUNK 3-JAW HYDRAULIC CHUCK MODEL ROTA NCO 800, WITH DEDICATED HYDRAULIC UN...
Hammer Price:
🔒
H. ERNAULT-SOMUA Z3CBH7
CNC MACHINE CENTERS
H. ERNAULT-SOMUA Z3CBH7 [HES] VERTICAL/HORIZONTAL MILLING MACHINE S/N: 105270/11 TABLE SIZE: 11.8" X...
Hammer Price:
🔒
1979 IKEGAI FX25N
CNC MACHINE CENTERS
1979 IKEGAI FX25N CNC CHUCK LATHE WITH 10" CHUCK S/N: 22390T SWING OVER BED: 25" EQUIPPED WITH: GE F...
Hammer Price:
🔒
COFFING
MISC
2 TON JIB CRANE WITH 2 TON COFFING HOIST FLOOR MOUNT, 5 FT. DIA. BASE, COLUMN 239 TALL, O/A ARM 19 F...
Hammer Price:
🔒
1978 IKEGAI FX20N
CNC MACHINE CENTERS
1978 IKEGAI FX20N CNC CHUCKING LATHE WITH 8" CHUCK (19613) S/N: 21507T MAXIMUM TURNING DIAMETER: 10....
Hammer Price:
🔒
WELLSAW 1016
WOODWORKING EQUIPMENT
WELLSAW 1016 HORIZONTAL BANDSAW ROUND CAPACITY: 10.5" RECTANGULAR CAPACITY, 90 DEGREES: 10" X 16" RE...
Hammer Price:
🔒
BETA II RATIOTROL RBAZ
CNC MACHINE CENTERS
28" 4TH AXIS WITH 20" NOBLE 4-JAW CHUCK, 10" THRU HOLE WITH BETA II RATIOTROL MODEL RBAZ VARIABLE SP...
Hammer Price:
🔒
19667B
METALWORKING & FABRICATION EQUIPMENT
3-JAW SCROLL CHUCK WITH 9-5/8" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667B)...
Hammer Price:
🔒
19667A
METALWORKING & FABRICATION EQUIPMENT
24" 3-JAW SCROLL CHUCK WITH 9.75" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667A)...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
1/2 TON JIB CRANE CAPACITY: 1/2 TON STOP TO STOP LENGTH: 151" OVERALL LENGTH: 184" COLUMN HEIGHT: 11...
Hammer Price:
🔒
19667C
METALWORKING & FABRICATION EQUIPMENT
24" 3-JAW SCROLL CHUCK WITH 10" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667C)...
Hammer Price:
🔒
METALWORKING & FABRICATION EQUIPMENT
3-JAW SCROLL CHUCK WITH 9.25" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT...
Hammer Price:
🔒
19667D
METALWORKING & FABRICATION EQUIPMENT
3-JAW SCROLL CHUCK WITH 9.75" THRU-HOLE, 2-PIECE JAWS, A-15 MOUNT (19667D)...
Hammer Price:
🔒
MISC
MOTORIZED INFEED UNIT LENGTH: 256" HEIGHT: 50" S/N: 288352 NOTE: ALL SPECIFICATIONS SUBJECT TO VERIF...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
1/2 TON JIB CRANE CAPACITY: 1/2 TON STOP TO STOP LENGTH: 150" OVERALL LENGTH: 181" COLUMN HEIGHT: 92...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2 TON JIB CRANE - COLUMN ONLY; 227" TALL, FLOOR MOUNT 5' DIA...
Hammer Price:
🔒
METALWORKING & FABRICATION EQUIPMENT
(1) BORING BAR HOLDER AND BAR 10-3/4" X 9" WITH BORING BAR 3-1/4" DIA X 76-1/2" L; (1) BORING BAR 4-...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
1/2 TON JIB CRANE CAPACITY: 1/2 TON BOOM LENGTH: 109" STOP TO STOP LENGTH: 90" COLUMN: 56" OVERALL: ...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
1/2 TON JIB CRANE CAPACITY: 1/2 TON BOOM LENGTH: 90" STOP TO STOP LENGTH: 108" COLUMN: 56" COLUMN OV...
Hammer Price:
🔒