Major Glass Manufacturing Facility Cold End Plant Support Assets in Waco Texas
Category: TEST, MEASUREMENT & QUALITY EQUIPMENT
Total Lots:
671
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
INDUSTRIAL DUST COLLECTION BLOWER SYSTEM W/ DUCTING & SQUARE D DISCONNECT; INDUSTRIAL CENTRIFUGAL BLOWER SYSTEM CONNECTED TO OVERHEAD DUCTING, LIKELY USED FOR DUST COLLECTION OR AIR HANDLING WITHIN A PLANT ENVIRONMENT. SYSTEM PULLS AIR THROUGH DUCTWORK AND EXHAUSTS THROUGH THE BLOWER HOUSING. INCLUDES A LARGE CENTRIFUGAL FAN/BLOWER HOUSING WITH ROUND INTAKE SCREEN, VERTICAL TRANSITION DUCT, AND OVERHEAD DUCTING RUN. DRIVEN BY AN ELECTRIC MOTOR MOUNTED AT THE BASE OF THE UNIT. ALSO INCLUDES A WALL-MOUNTED SQUARE D DISCONNECT/CONTROL PANEL TIED TO THE SYSTEM. BLOWER TYPE: CENTRIFUGAL FAN / DUST COLLECTION BLOWER DRIVE: DIRECT-COUPLED ELECTRIC MOTOR ELECTRICAL PANEL: SQUARE D DISCONNECT MARKING ON PANEL: B1 MAIN COOLING WIND FAN 3P-10L 50,52,54 SYSTEM INCLUDES BLOWER HOUSING, MOTOR, DUCT TRANSITION, OVERHEAD DUCTING, AND ELECTRICAL DISCONNECT AS SHOWN. SUITABLE FOR INDUSTRIAL VENTILATION, DUST COLLECTION, OR EXHAUST APPLICATIONS.
|
🔒 Subscribe | |||
|
|
DAYTON | 2ATC7 |
DAYTON 30" INDUSTRIAL AXIAL FAN MODEL 2ATC7 ON STAND WITH CONTROL BOX; INDUSTRIAL AXIAL FAN UNIT BY DAYTON, MODEL 2ATC7, FEATURING APPROXIMATELY 30 INCH DIAMETER FAN HOUSED IN CYLINDRICAL METAL CASING WITH PROTECTIVE GUARD; MOUNTED ON ELEVATED STEEL STAND (NOT ON CASTERS); INCLUDES ATTACHED CONTROL BOX WITH PUSH-BUTTON CONTROLS, HEAVY-DUTY CABLING, AND INDUSTRIAL PLUG CONNECTION; NAMEPLATE INDICATES MULTI-VOLTAGE CONFIGURATION (208-230/460V, 60 HZ); DESIGNED FOR HIGH-VOLUME AIR MOVEMENT IN INDUSTRIAL ENVIRONMENTS.
|
🔒 Subscribe | |
|
WESTINGHOUSE |
WESTINGHOUSE INDUSTRIAL VENTILATION UNIT ENCLOSED FAN SYSTEM ON CASTERS WITH TOW HITCH; INDUSTRIAL VENTILATION UNIT HOUSED IN HEAVY-GAUGE METAL ENCLOSURE WITH MESH PANELING AND ACCESS DOOR; EQUIPPED WITH INTERNAL LARGE-DIAMETER FAN DRIVEN BY WESTINGHOUSE LIFE-LINE MOTOR (NAMEPLATE VISIBLE); MOUNTED ON INTEGRATED STEEL BASE WITH CASTERS AND FRONT TOW HITCH/PULL HANDLE FOR MOBILITY; INCLUDES MOUNTED CONTROL BOX WITH PUSH-BUTTON INTERFACE AND ATTACHED HEAVY-DUTY POWER CABLE WITH INDUSTRIAL MULTI-PIN PLUG; DESIGNED FOR HIGH-VOLUME AIR MOVEMENT AND VENTILATION IN INDUSTRIAL ENVIRONMENTS.
|
🔒 Subscribe | ||
|
|
CRATE OF STORAGE CONTAINERS/ BINS; ASSORTMENT OF STORAGE CONTAINERS & BINS
|
🔒 Subscribe | |||
|
|
STORAGE RACK; DIMENSIONS: H 87 W 36-1/8 D 18 INCH
|
🔒 Subscribe | |||
|
|
PORTABLE WORK STATION/ STORAGE; DIMENSIONS: H 38-1/4 W 20 D 32 INCH
|
🔒 Subscribe | |||
|
|
GLASS CONTAINER INSPECTION DEVICE; IINDUSTRIAL EQUIPMENT IS DESIGNED FOR HIGH-SPEED, AUTOMATED QUALITY CONTROL TO DETECT DEFECTS IN MANUFACTURED GLASS CONTAINERS.
|
🔒 Subscribe | |||
|
|
INDUSTRIAL CONVEYOR DRUM PULLEY WITH DIAMOND-GROOVED RUBBER LAGGING TO IMPROVE TRACTION AND INCREASE FRICTION BETWEEN THE PULLEY AND THE BELT. CONSTRUCTED WITH A METAL CORE AND DESIGNED FOR HEAVY-DUTY APPLICATIONS LIKE MINING OR MATERIAL HANDLING.
|
🔒 Subscribe | |||
|
|
5 INDIVIDUAL SHELVING UNITS TOTAL SPAN: 12FT SHELF HEIGHT 87"
|
🔒 Subscribe | |||
|
|
LOT OF FORMED SHEET METAL CHANNELS, TRIM PIECES, AND STRUCTURAL SECTIONS - MIXED LOT OF LONG-LENGTH FORMED SHEET METAL COMPONENTS AND STRUCTURAL CHANNEL SECTIONS. INCLUDES A VARIETY OF PROFILES SUCH AS U-CHANNEL, HAT CHANNEL, ANGLE, AND CUSTOM-FORMED TRIM PIECES IN MULTIPLE FINISHES INCLUDING GALVANIZED AND PAINTED. ASSORTED LENGTHS WITH UNIFORM BENDS, FLANGES, AND FORMED EDGES; SOME PIECES FEATURE PRE-PUNCHED HOLES AND MOUNTING LIPS. MATERIAL APPEARS TO BE ROLL FORMED AND BRAKE FORMED COMPONENTS SUITABLE FOR FRAMING, PANELING, ENCLOSURE WORK, OR GENERAL FABRICATION. BULK PALLETIZED LOT OF REUSABLE INDUSTRIAL SHEET METAL SECTIONS AND FORMED COMPONENTS.
|
🔒 Subscribe | |||
|
|
ROLL FORMED STEEL CHANNELS AND SHEET METAL SECTIONS - MIXED LOT OF LONG-LENGTH ROLL FORMED METAL SECTIONS AND FORMED SHEET COMPONENTS. INCLUDES MULTIPLE STACKS OF U-CHANNEL AND HAT-CHANNEL PROFILES ALONG WITH ASSORTED FORMED SHEET METAL PIECES. SECTIONS APPEAR TO BE CONSISTENT LENGTHS SUITABLE FOR STRUCTURAL FRAMING, CONVEYOR SIDEWALLS, GUARDING, OR EQUIPMENT FABRICATION. PROFILES INCLUDE BOXED CHANNELS, OPEN CHANNELS, AND ANGLED SHEET FORMS WITH UNIFORM BENDS. SOME PIECES SHOW PRE-PUNCHED HOLES AND FORMED LIPS FOR MOUNTING OR FASTENING. MATERIAL STAGED ON PALLETS FOR HANDLING. BULK LOT OF REUSABLE INDUSTRIAL STEEL CHANNEL AND FORMED COMPONENTS FROM PRODUCTION ENVIRONMENT.
|
🔒 Subscribe | |||
|
|
HEAVY-DUTY INDUSTRIAL WAREHOUSE CART; CONSTRUCTION: BUILT WITH A DURABLE METAL FRAME DESIGNED FOR HEAVY LOADS. MOBILITY: EQUIPPED WITH CASTERS OR WHEELS FOR EASY TRANSPORT ACROSS ROUGH SURFACES. FUNCTION: DESIGNED TO TRANSPORT BULKY, HEAVY, OR LONG ITEMS WITHIN COMMERCIAL OR INDUSTRIAL ENVIRONMENTS.
|
🔒 Subscribe | |||
|
|
CRATE OF CERAMIC REFRACTORY COMPONENTS; MATERIAL: IT IS MADE FROM A HIGH-PURITY CERAMIC, POSSIBLY ALUMINA OR A SIMILAR REFRACTORY MATERIAL, DESIGNED TO WITHSTAND EXTREME TEMPERATURES AND HARSH ENVIRONMENTS. PURPOSE: THESE COMPONENTS ARE TYPICALLY USED TO GUIDE, SHAPE, OR CONTAIN MOLTEN MATERIALS LIKE GLASS, ENSURING PURITY AND DURABILITY.
|
🔒 Subscribe | |||
|
|
ASSORTMENT OF HOSES AND HOSE REELS; VARIETY OF HOSES & HOSE REELS WITH REEL FRAMES
|
🔒 Subscribe | |||
|
|
BROTHER | P-TOUCH PT-340 |
BROTHER P-TOUCH PT-340 ELECTRONIC LABEL MAKER; TECHNOLOGY: ELECTRONIC LABELING SYSTEM THAT PRINTS BLACK AND WHITE LABELS USING THERMAL PRINT TECHNOLOGY. POWER: OPERATES ON 6 AAA BATTERIES (AM3, LR6, SUM-3, R6). FEATURES: FEATURES A KEYBOARD FOR INPUTTING TEXT TO BE PRINTED.
|
🔒 Subscribe | |
|
|
STEEL DOOR WITH TRIM/ CHANNELING; STEEL AND ALUMINUM TRIM/ CHANNELING DOOR DIMENSIONS: H 6 W 35-3/4 INCH
|
🔒 Subscribe | |||
|
|
GLOBAL INDUSTRIES |
STORAGE CABINET WITH WORK BENCH. CABINET DIMENSIONS: H 72 W 38-1/4 D 24-1/4. WORK BENCH DIMENSIONS: H 36 W 24 L 36
|
🔒 Subscribe | ||
|
|
(5) CONDUIT BENDER; FUNCTION: SHAPES EMT OR RIGID METAL CONDUIT FOR ROUTING ELECTRICAL WIRING AROUND OBSTACLES. DESIGN: FEATURES A DIE-CAST ALUMINUM OR IRON HEAD WITH A STEEL HANDLE FOR LEVERAGE.
|
🔒 Subscribe | |||
|
|
ROTARY SCREW AIR COMPRESSOR PACKAGE WITH RECEIVER TANK & AIR-COOLED AFTERCOOLER - SKID-MOUNTED INDUSTRIAL AIR COMPRESSOR PACKAGE CONSISTING OF A ROTARY SCREW COMPRESSOR, VERTICAL AIR RECEIVER TANK, AND AIR-COOLED AFTERCOOLER WITH LARGE FAN ASSEMBLY. SYSTEM IS CONFIGURED FOR COMPRESSED AIR GENERATION, COOLING, AND MOISTURE SEPARATION. INCLUDES COMPRESSOR ELEMENT WITH MOTOR DRIVE, INTEGRATED PIPING, SEPARATOR HOUSING, AND CONTROL PANEL WITH GAUGES AND HOUR METER. REAR-MOUNTED AIR-COOLED HEAT EXCHANGER WITH FAN PROVIDES COOLING PRIOR TO DOWNSTREAM USE. VERTICAL TANK INCLUDES DRAIN VALVES AND FITTINGS FOR CONDENSATE MANAGEMENT. CONTROL PANEL: MULTI-GAUGE PANEL (PRESSURE, TEMPERATURE, OIL-RELATED READINGS VISIBLE) RECEIVER TANK: VERTICAL ORIENTATION WITH DRAIN VALVES AND LEVEL CONNECTIONS COOLING: AIR-COOLED RADIATOR WITH LARGE AXIAL FAN COMPRESSOR TYPE: ROTARY SCREW STYLE (BASED ON HOUSING AND SEPARATOR CONFIGURATION) MOUNTED ON COMMON STEEL SKID WITH INTEGRATED PIPING SYSTEM
|
🔒 Subscribe | |||
|
|
SENS | Q048012TL511B |
SENS ENERGENIUS IQ INDUSTRIAL BATTERY CHARGER DESIGNED FOR MAINTAINING AND MONITORING BACKUP BATTERY SYSTEMS. COMMONLY USED IN STANDBY POWER, UPS, AND CRITICAL INFRASTRUCTURE APPLICATIONS. WALL-MOUNTED UNIT WITH INTEGRATED DIGITAL CONTROL INTERFACE AND DISPLAY PANEL FOR SYSTEM MONITORING AND CONFIGURATION. FEATURES BUILT-IN BATTERY CHECK SYSTEM AND DATA LOGGING CAPABILITY. DC OUTPUT: 48 VDC (NOMINAL), OUTPUT CURRENT: 12 AMPS, AC INPUT VOLTAGE: 120 / 208 / 240 VAC, FREQUENCY: 60 HZ, PHASE: SINGLE PHASE, CHARGER TYPE: FILTERED BATTERY CHARGER, ENCLOSURE: INDUSTRIAL METAL CABINET, WALL-MOUNTED, INTERFACE: LCD DISPLAY WITH KEYPAD NAVIGATION, FUNCTIONS: BATTERY MONITORING, DIAGNOSTICS, DATA LOGGING. S/N: 313141
|
🔒 Subscribe | |
|
|
SENS | Q048012TL511B |
SENS ENERGENIUS IQ INDUSTRIAL BATTERY CHARGER DESIGNED FOR MAINTAINING AND MONITORING BACKUP BATTERY SYSTEMS. COMMONLY USED IN STANDBY POWER, UPS, AND CRITICAL INFRASTRUCTURE APPLICATIONS. WALL-MOUNTED UNIT WITH INTEGRATED DIGITAL CONTROL INTERFACE AND DISPLAY PANEL FOR SYSTEM MONITORING AND CONFIGURATION. FEATURES BUILT-IN BATTERY CHECK SYSTEM AND DATA LOGGING CAPABILITY. DC OUTPUT: 48 VDC (NOMINAL) OUTPUT CURRENT: 12 AMPS AC INPUT VOLTAGE: 120 / 208 / 240 VAC FREQUENCY: 60 HZ PHASE: SINGLE PHASE CHARGER TYPE: FILTERED BATTERY CHARGER INCLUDES ENCLOSED METAL CABINET, CONTROL INTERFACE WITH LCD DISPLAY AND KEYPAD, AND CONNECTED CONDUIT. S/N: 313140
|
🔒 Subscribe | |
|
|
ULINE |
ULINE 48"X40" PALLET COLLAR LIDS. DIMENSIONS: 48X40. WEIGHT: APPROXIMATELY 19 LBS. MATERIAL: WOOD WITH SNAP-IN WOODEN BATTENS TO ENSURE A SECURE FIT ON THE COLLAR.
|
🔒 Subscribe | ||
|
|
INDUSTRIAL METAL SHELF WITH TWO TIERS AND LOWER STORAGE AREA. ASSORTED CONTENTS INCLUDING BOXED BEARINGS, TAPERED BUSH ASSEMBLIES, SPACERS, MACHINED COMPONENTS, SPRINGS, AND MISCELLANEOUS HARDWARE. INCLUDES MULTIPLE LABELED BOXES (PART NUMBERS VISIBLE SUCH AS 40023823, 40011541, AND DODGE TAPERED BUSH ASSEMBLIES), ALONG WITH LOOSE MACHINED METAL COMPONENTS AND PACKAGED PARTS. CONTENTS APPEAR TO INCLUDE A MIX OF UNUSED AND STORED SPARE PARTS COMMONLY USED IN INDUSTRIAL MACHINERY, MAINTENANCE, OR PRODUCTION ENVIRONMENTS. ALL ITEMS SHOWN ON AND WITHIN THE SHELF ARE INCLUDED.
|
🔒 Subscribe | |||
|
|
(2) VERTICAL UPRIGHTS (7) HORIZONTAL BEAMS (3) 4X8 PLYWOOD PALLET RACKING
|
🔒 Subscribe | |||
|
|
SMC |
SMC PNEUMATIC LINEAR ACTUATOR COLUMN ASSEMBLY WITH CERAMIC ELECTRICAL INSULATOR - INDUSTRIAL AUTOMATION SLIDE UNIT, VERTICAL MOTION SYSTEM; SMC-BRANDED PNEUMATIC LINEAR ACTUATOR COLUMN ASSEMBLY FEATURING AN ENCLOSED VERTICAL SLIDE DESIGN WITH INTEGRATED AIR PORTS, WIRING, AND MOUNTING STRUCTURE. UNIT APPEARS TO BE A VERTICAL MOTION ACTUATOR OR GUIDED SLIDE SYSTEM COMMONLY USED IN INDUSTRIAL AUTOMATION, MATERIAL HANDLING, PICK-AND-PLACE, OR POSITIONING APPLICATIONS. ASSEMBLY INCLUDES RECTANGULAR ACTUATOR BODY, TOP PORT CONNECTIONS, SIDE-MOUNTED CONTROL HOUSING, AND ASSOCIATED CABLING. ALSO INCLUDED IS A RIBBED CERAMIC ELECTRICAL INSULATOR COMPONENT (BOXED, LABELED WC ITEM #2500I/L), TYPICALLY USED FOR HIGH-VOLTAGE ISOLATION OR INDUSTRIAL ELECTRICAL APPLICATIONS. MOUNTED ON PALLET WITH ADDITIONAL WRAPPED COMPONENTS AND FITTINGS VISIBLE. SUITABLE FOR INTEGRATION INTO AUTOMATED PRODUCTION LINES, ROBOTIC CELLS, OR PNEUMATIC AND ELECTRICAL SYSTEMS REQUIRING LINEAR MOTION AND INSULATED ELECTRICAL COMPONENTS.
|
🔒 Subscribe | ||
|
|
MOTION INDUSTRIES | TX97 |
LARGE INDUSTRIAL STEEL SPROCKET (MOTION INDUSTRIES TX97) - HEAVY DUTY CONVEYOR DRIVE COMPONENT. INDUSTRIAL STEEL SPROCKET SOURCED FROM MOTION INDUSTRIES, SUITABLE FOR CONVEYOR OR DRIVE SYSTEM APPLICATIONS. COMPONENT TYPE: STEEL SPROCKET / DRIVE WHEEL. BRAND / SOURCE: MOTION INDUSTRIES (TX97). CONSTRUCTION: SOLID METAL CONSTRUCTION. MACHINED BORE WITH KEYWAY. DESIGN FEATURES: LARGE DIAMETER SPROCKET WITH MULTIPLE TEETH. CENTER HUB FOR SHAFT MOUNTING. MARKINGS: BOX LABELED TX22 / SRWJ. MOTION INDUSTRIES SHIPPING LABEL PRESENT. HEAVY-DUTY INDUSTRIAL COMPONENT COMMONLY USED IN CONVEYOR SYSTEMS, MATERIAL HANDLING, OR MECHANICAL DRIVE ASSEMBLIES. SUITABLE FOR REPLACEMENT, SPARE INVENTORY, OR RESALE.
|
🔒 Subscribe | |
|
|
DOLLINGER FILTRATION | TURBO KLEEN |
DOLLINGER FILTRATION TURBO KLEEN PANEL FILTER ELEMENT. DESIGNED FOR INDUSTRIAL AIR INTAKE FILTRATION, SPECIFICALLY FOR PROTECTING COMPRESSORS IN SEVERE CONDITIONS. RATED FOR A FLOW RATE OF 3,000 SCFM. PROVIDES 99.97% EFFICIENCY FOR 2-MICRON PARTICLES AND LARGER. FEATURES A LIGHTWEIGHT, 100% POLYMERIC, CORROSION-RESISTANT FRAME THAT IS INCINERABLE.
|
🔒 Subscribe | |
|
|
(2) LARGE INDUSTRIAL SPIRAL-WOUND FILTER MEDIA ROLLS (FIBERGLASS/SYNTHETIC) - (2) LARGE INDUSTRIAL SPIRAL-WOUND FILTER MEDIA ROLLS (FIBERGLASS/SYNTHETIC); LARGE SPIRAL-WOUND INDUSTRIAL FILTER MEDIA ROLLS CONSTRUCTED OF BLUE AND WHITE FIBROUS MATERIAL WITH VISIBLE CONCENTRIC LAYERING AND CENTER CORES. MATERIAL APPEARS TO BE CONTINUOUS ROLLED FILTRATION MEDIA COMMONLY USED IN HVAC SYSTEMS, PAINT BOOTHS, OR INDUSTRIAL AIR FILTRATION APPLICATIONS. EACH ROLL IS FULL-SIZE AND STORED UPRIGHT, WRAPPED IN PROTECTIVE PLASTIC. SUITABLE FOR CUTTING TO SIZE FOR FILTRATION USE OR REPURPOSING AS BULK FILTER MEDIA. NO MANUFACTURER OR SPECIFICATIONS VISIBLE ON EXTERIOR.
|
🔒 Subscribe | |||
|
|
DROP GUIDE HOLDER/ GOB DEFECTOR: MOLTEN GLASS IS CUT INTO SPECIFIC PORTIONS CALLED "GOBS". THE DEFLECTOR IS A CURVED CHANNEL THAT CATCHES THESE FALLING GOBS AND CHANGES THEIR DIRECTION TO GUIDE THEM PRECISELY INTO THE FORMING MOLDS. DROP GUIDE HOLDER: THIS COMPONENT ACTS AS A MOUNTING BRACKET OR SUPPORT STRUCTURE THAT ALIGNS THE GUIDE FUNNELS AND ENSURES THE GOB ENTERS THE MOLD CENTERED AND WITHOUT DAMAGE.
|
🔒 Subscribe | |||
|
|
WORK TABLE; DIMENSIONS: H 36-1/2 L 96 W 30
|
🔒 Subscribe | |||
|
|
(6) MODULAR PLASTIC CONVEYOR CHAINS; MATERIAL: TYPICALLY MADE FROM ENGINEERED PLASTIC FOR DURABILITY AND SPECIFIC APPLICATION REQUIREMENTS. APPLICATION: USED IN INDUSTRIAL CONVEYOR SYSTEMS FOR TRANSPORTING GOODS ACROSS VARIOUS INDUSTRIES. DESIGN: FEATURES MODULAR INTERLOCKING LINKS THAT ALLOW FOR STRAIGHT-RUNNING OR SIDE-FLEXING MOVEMENT DEPENDING ON THE TYPE.
|
🔒 Subscribe | |||
|
|
METAL SHELVING; 7 INDIVIDUAL SHELVING UNITS TOTAL SPAN: 20FT SHELF HEIGHT 87 INCH
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL FLEXIBLE METAL HOSES WITH A BRAIDED COVER; MATERIAL: USUALLY CONSTRUCTED FROM 321 OR 316 STAINLESS STEEL TO RESIST CORROSION. FEATURES: THEY ARE EXTREMELY FLEXIBLE AND DESIGNED TO ABSORB VIBRATION AND HANDLE HIGH PRESSURES. TEMPERATURE RANGE: SUITABLE FOR EXTREME ENVIRONMENTS, RANGING FROM APPROXIMATELY -320F TO 1500F.
|
🔒 Subscribe | |||
|
|
INDUSTRIAL CUTTING TORCH CART - USED FOR MOVING OXY-ACETYLENE TANKS AND EQUIPMENT IN INDUSTRIAL SETTINGS. FEATURES: INCLUDES A STURDY STEEL FRAME, WHEELS FOR MOBILITY, AND SAFETY CHAINS TO SECURE THE TANKS.
|
🔒 Subscribe | |||
|
|
ULINE | ECONOMY AIR BUBBLE WRAP |
ULINE ECONOMY AIR BUBBLE WRAP
|
🔒 Subscribe | |
|
|
ASSORTMENT OF INDUSTRIAL DRIVE BELTS; VARIOUS SIZES OF V-BELTS
|
🔒 Subscribe | |||
|
|
ASSORTMENT OF INDUSTRIAL DRIVE BELTS; VARIOUS SIZES OF V-BELTS/ COGGED BELTS
|
🔒 Subscribe | |||
|
|
FLAMMABLE STORAGE CABINET; DIMENSIONS: H 65-3/8 W 43-1/2 D 18-3/4
|
🔒 Subscribe | |||
|
|
FLAMMABLE STORAGE CABINET; DIMENSIONS: H 65-3/8 W 43-1/2 D 18-3/4
|
🔒 Subscribe | |||
|
|
1 UNIT INDUSTRIAL FAN WHEEL / IMPELLER ASSEMBLY WITH RADIAL BLADES; CIRCULAR INDUSTRIAL FAN WHEEL / IMPELLER ASSEMBLY FEATURING HEAVY METAL CONSTRUCTION WITH MULTIPLE INTERNAL RADIAL BLADES AND CENTRAL HUB MOUNTING POINT. UNIT APPEARS DESIGNED FOR AIR MOVEMENT OR MATERIAL HANDLING WITHIN DUCTED OR ENCLOSED SYSTEMS. TOP PLATE IS SEGMENTED AND BOLTED AROUND CENTRAL HUB, WITH INTERNAL VANE STRUCTURE VISIBLE FROM SIDE. MOUNTED ON PALLET FOR TRANSPORT. TYPE: FAN WHEEL / IMPELLER ASSEMBLY CONFIGURATION: CIRCULAR HOUSING WITH INTERNAL RADIAL BLADES HUB: CENTRAL BOLTED MOUNTING HUB CONSTRUCTION: HEAVY METAL FABRICATION DESIGN: MULTI-BLADE RADIAL AIRFLOW CONFIGURATION MOUNTING: CENTRAL SHAFT MOUNT INTERFACE APPLICATION: INDUSTRIAL VENTILATION, BLOWER, OR MATERIAL HANDLING SYSTEM COMPONENT
|
🔒 Subscribe | |||
|
|
METAL UTILITY CART - METAL CART WITH WOOD PANELED BASE
|
🔒 Subscribe | |||
|
|
VERTICAL TANK / HOPPER VESSEL WITH FLANGED OUTLET AND REMOVABLE TOP; LARGE CYLINDRICAL VESSEL FEATURING CLOSED BOTTOM WITH WELDED OUTLET NOZZLE AND FLANGE CONNECTION, AND A LOOSE OR REMOVABLE TOP COVER. UNIT APPEARS TO BE A VERTICAL PROCESS VESSEL RATHER THAN A PIPE, WITH A WIDE UPPER OPENING AND TAPERED TRANSITION TOWARD THE BOTTOM OUTLET. SUPPORTED IN A METAL FRAME AND WRAPPED FOR STORAGE. TYPE: VERTICAL TANK / HOPPER VESSEL CONFIGURATION: CYLINDRICAL BODY WITH TAPERED LOWER SECTION BOTTOM: CLOSED WITH WELDED OUTLET NOZZLE AND FLANGE TOP: REMOVABLE OR LOOSE COVER (NOT PERMANENTLY ATTACHED) MOUNTING: SUPPORTED IN METAL FRAME CONNECTIONS: FLANGED OUTLET FOR PIPING INTEGRATION CONSTRUCTION: HEAVY METAL FABRICATION APPLICATION: MATERIAL COLLECTION, DISCHARGE, OR HOLDING VESSEL
|
🔒 Subscribe | |||
|
|
(2) HEAVY DUTY STEEL STRUCTURAL MOUNTING BRACKETS WITH BASE PLATES INDUSTRIAL SUPPORTS - (2) HEAVY DUTY METAL SUPPORT LEGS OR MOUNTING STANDS WITH WELDED CONSTRUCTION AND PRE-DRILLED BOLT HOLES FOR ATTACHMENT. INDUSTRIAL STRUCTURAL COMPONENTS DESIGNED FOR SUPPORTING CONVEYOR SECTIONS OR SIMILAR EQUIPMENT. INCLUDES BASE PLATES AND MOUNTING POINTS AS SHOWN. SUITABLE FOR CONVEYOR SYSTEMS, MATERIAL HANDLING SETUPS, OR STRUCTURAL SUPPORT APPLICATIONS.
|
🔒 Subscribe | |||
|
|
(6) SPRING LOADED INDUSTRIAL PRESSURE CONTROL VALVE ASSEMBLIES HYDRAULIC / GAS REGULATORS; (6) SPRING LOADED INDUSTRIAL PRESSURE CONTROL VALVE ASSEMBLIES INCLUDING MACHINED VALVE BODIES, INTERNAL COMPONENTS, AND LARGE COMPRESSION SPRINGS. UNITS APPEAR TO BE DESIGNED FOR HYDRAULIC OR GAS PRESSURE REGULATION APPLICATIONS. INCLUDES MULTIPLE WRAPPED COMPONENTS AND LOOSE ASSEMBLY. SUITABLE FOR INDUSTRIAL SYSTEMS REQUIRING PRESSURE CONTROL, REGULATION, OR RELIEF FUNCTIONS. COMPONENTS AND PACKAGING MARKINGS VISIBLE ON UNITS.
|
🔒 Subscribe | |||
|
|
TUTHILL | 60-16883 |
TUTHILL INDUSTRIAL FILTER ELEMENT MODEL 60-16883 VACUUM BLOWER SYSTEM COMPONENT. INDUSTRIAL FILTER ELEMENT MANUFACTURED BY TUTHILL, LABELED PART NUMBER 2012090000 AND REFERENCE NUMBER 60-16883. IDENTIFIED AS A COMPONENT ASSOCIATED WITH TUTHILL VACUUM BLOWER SYSTEMS. UNIT IS HOUSED IN ORIGINAL CARTON WITH MANUFACTURER LABELING AND PACKAGING MATERIALS. DESIGNED FOR INTEGRATION INTO AIR HANDLING, FILTRATION, OR BLOWER SYSTEM APPLICATIONS WHERE PARTICULATE SEPARATION OR AIRFLOW CONDITIONING IS REQUIRED. APPLICATION: VACUUM BLOWER SYSTEM FILTRATION COMPONENT. TYPE: INDUSTRIAL FILTER ELEMENT. PACKAGING: ORIGINAL BOX WITH MANUFACTURER LABELING.
|
🔒 Subscribe | |
|
|
(3) LARGE CYLINDRICAL INDUSTRIAL COMPONENTS WITH CENTER BORE HEAVY MOLDED ASSEMBLIES ON PALLET - (3) LARGE CYLINDRICAL INDUSTRIAL COMPONENTS WITH CENTER BORE HEAVY MOLDED ASSEMBLIES ON PALLET; THREE LARGE CYLINDRICAL INDUSTRIAL COMPONENTS FEATURING HEAVY MOLDED OUTER BODIES WITH CENTRAL BORE OPENINGS. UNITS INCLUDE BANDED OUTER SECTIONS AND FLAT TOP SURFACES WITH VISIBLE WEAR DEBRIS, SUGGESTING PRIOR INTEGRATION WITHIN ROTATING OR HIGH-TEMPERATURE INDUSTRIAL SYSTEMS. EACH PIECE IS CONSTRUCTED WITH THICK WALLS AND UNIFORM CYLINDRICAL GEOMETRY, LIKELY DESIGNED FOR MOUNTING ON A SHAFT OR SPINDLE WITHIN PROCESSING EQUIPMENT. MOUNTED ON PALLET FOR TRANSPORT. QUANTITY: THREE CYLINDRICAL UNITS FORM: HEAVY CYLINDRICAL BODIES WITH CENTER BORE OPENINGS CONSTRUCTION: THICK MOLDED OUTER SHELLS WITH BANDED SECTIONS FEATURES: FLAT TOP SURFACES WITH CENTRAL MOUNTING HOLES MOUNTING: DESIGNED FOR SHAFT OR SPINDLE INTEGRATION APPLICATION: INDUSTRIAL PROCESSING, ROTATING ASSEMBLIES, OR HIGH-LOAD SYSTEMS PALLETIZED FOR HANDLING AND TRANSPORT
|
🔒 Subscribe | |||
|
|
20 INDIVIDUAL SHELVING UNITS TOTAL SPAN: APPROXIMATELY 30 SHELF HEIGHT 87"
|
🔒 Subscribe | |||
|
|
19 INDIVIDUAL SHELVING UNITS TOTAL SPAN: APPROXIMATELY 30 SHELF HEIGHT 87"
|
🔒 Subscribe | |||
|
|
(5) INDUSTRIAL FRAME MATERIAL HANDLING CARTS ON CASTERS; QUANTITY: (5) CARTS CONSTRUCTION: WELDED METAL FRAME DESIGN: OPEN-FRAME WITH DUAL HORIZONTAL RAILS MOBILITY: EACH CART MOUNTED ON CASTERS APPLICATION: MATERIAL HANDLING, TRANSPORT OF LONG STOCK OR COMPONENTS
|
🔒 Subscribe | |||
|
|
METAL UTILITY CART
|
🔒 Subscribe |
INDUSTRIAL DUST COLLECTION BLOWER SYSTEM W/ DUCTING & SQUARE D DISCONNECT; INDUSTRIAL CENTRIFUGAL BL
DAYTON 2ATC7
DAYTON 30" INDUSTRIAL AXIAL FAN MODEL 2ATC7 ON STAND WITH CONTROL BOX; INDUSTRIAL AXIAL FAN UNIT BY ...
WESTINGHOUSE
WESTINGHOUSE INDUSTRIAL VENTILATION UNIT ENCLOSED FAN SYSTEM ON CASTERS WITH TOW HITCH; INDUSTRIAL V...
CRATE OF STORAGE CONTAINERS/ BINS; ASSORTMENT OF STORAGE CONTAINERS & BINS
STORAGE RACK; DIMENSIONS: H 87 W 36-1/8 D 18 INCH
PORTABLE WORK STATION/ STORAGE; DIMENSIONS: H 38-1/4 W 20 D 32 INCH
GLASS CONTAINER INSPECTION DEVICE; IINDUSTRIAL EQUIPMENT IS DESIGNED FOR HIGH-SPEED, AUTOMATED QUALI
INDUSTRIAL CONVEYOR DRUM PULLEY WITH DIAMOND-GROOVED RUBBER LAGGING TO IMPROVE TRACTION AND INCREASE
5 INDIVIDUAL SHELVING UNITS TOTAL SPAN: 12FT SHELF HEIGHT 87"
LOT OF FORMED SHEET METAL CHANNELS, TRIM PIECES, AND STRUCTURAL SECTIONS - MIXED LOT OF LONG-LENGTH
ROLL FORMED STEEL CHANNELS AND SHEET METAL SECTIONS - MIXED LOT OF LONG-LENGTH ROLL FORMED METAL SEC
HEAVY-DUTY INDUSTRIAL WAREHOUSE CART; CONSTRUCTION: BUILT WITH A DURABLE METAL FRAME DESIGNED FOR HE
CRATE OF CERAMIC REFRACTORY COMPONENTS; MATERIAL: IT IS MADE FROM A HIGH-PURITY CERAMIC, POSSIBLY AL
ASSORTMENT OF HOSES AND HOSE REELS; VARIETY OF HOSES & HOSE REELS WITH REEL FRAMES
BROTHER P-TOUCH PT-340
BROTHER P-TOUCH PT-340 ELECTRONIC LABEL MAKER; TECHNOLOGY: ELECTRONIC LABELING SYSTEM THAT PRINTS BL...
STEEL DOOR WITH TRIM/ CHANNELING; STEEL AND ALUMINUM TRIM/ CHANNELING DOOR DIMENSIONS: H 6 W 35-3/4
GLOBAL INDUSTRIES
STORAGE CABINET WITH WORK BENCH. CABINET DIMENSIONS: H 72 W 38-1/4 D 24-1/4. WORK BENCH DIMENSIONS: ...
(5) CONDUIT BENDER; FUNCTION: SHAPES EMT OR RIGID METAL CONDUIT FOR ROUTING ELECTRICAL WIRING AROUND
ROTARY SCREW AIR COMPRESSOR PACKAGE WITH RECEIVER TANK & AIR-COOLED AFTERCOOLER - SKID-MOUNTED INDUS
SENS Q048012TL511B
SENS ENERGENIUS IQ INDUSTRIAL BATTERY CHARGER DESIGNED FOR MAINTAINING AND MONITORING BACKUP BATTERY...
SENS Q048012TL511B
SENS ENERGENIUS IQ INDUSTRIAL BATTERY CHARGER DESIGNED FOR MAINTAINING AND MONITORING BACKUP BATTERY...
ULINE
ULINE 48"X40" PALLET COLLAR LIDS. DIMENSIONS: 48X40. WEIGHT: APPROXIMATELY 19 LBS. MATERIAL: WOOD WI...
INDUSTRIAL METAL SHELF WITH TWO TIERS AND LOWER STORAGE AREA. ASSORTED CONTENTS INCLUDING BOXED BEAR
(2) VERTICAL UPRIGHTS (7) HORIZONTAL BEAMS (3) 4X8 PLYWOOD PALLET RACKING
SMC
SMC PNEUMATIC LINEAR ACTUATOR COLUMN ASSEMBLY WITH CERAMIC ELECTRICAL INSULATOR - INDUSTRIAL AUTOMAT...
MOTION INDUSTRIES TX97
LARGE INDUSTRIAL STEEL SPROCKET (MOTION INDUSTRIES TX97) - HEAVY DUTY CONVEYOR DRIVE COMPONENT. INDU...
DOLLINGER FILTRATION TURBO KLEEN
DOLLINGER FILTRATION TURBO KLEEN PANEL FILTER ELEMENT. DESIGNED FOR INDUSTRIAL AIR INTAKE FILTRATION...
(2) LARGE INDUSTRIAL SPIRAL-WOUND FILTER MEDIA ROLLS (FIBERGLASS/SYNTHETIC) - (2) LARGE INDUSTRIAL S
DROP GUIDE HOLDER/ GOB DEFECTOR: MOLTEN GLASS IS CUT INTO SPECIFIC PORTIONS CALLED "GOBS". THE DEFLE
WORK TABLE; DIMENSIONS: H 36-1/2 L 96 W 30
(6) MODULAR PLASTIC CONVEYOR CHAINS; MATERIAL: TYPICALLY MADE FROM ENGINEERED PLASTIC FOR DURABILITY
METAL SHELVING; 7 INDIVIDUAL SHELVING UNITS TOTAL SPAN: 20FT SHELF HEIGHT 87 INCH
STAINLESS STEEL FLEXIBLE METAL HOSES WITH A BRAIDED COVER; MATERIAL: USUALLY CONSTRUCTED FROM 321 OR
INDUSTRIAL CUTTING TORCH CART - USED FOR MOVING OXY-ACETYLENE TANKS AND EQUIPMENT IN INDUSTRIAL SETT
ULINE ECONOMY AIR BUBBLE WRAP
ULINE ECONOMY AIR BUBBLE WRAP...
ASSORTMENT OF INDUSTRIAL DRIVE BELTS; VARIOUS SIZES OF V-BELTS
ASSORTMENT OF INDUSTRIAL DRIVE BELTS; VARIOUS SIZES OF V-BELTS/ COGGED BELTS
FLAMMABLE STORAGE CABINET; DIMENSIONS: H 65-3/8 W 43-1/2 D 18-3/4
FLAMMABLE STORAGE CABINET; DIMENSIONS: H 65-3/8 W 43-1/2 D 18-3/4
1 UNIT INDUSTRIAL FAN WHEEL / IMPELLER ASSEMBLY WITH RADIAL BLADES; CIRCULAR INDUSTRIAL FAN WHEEL /
METAL UTILITY CART - METAL CART WITH WOOD PANELED BASE
VERTICAL TANK / HOPPER VESSEL WITH FLANGED OUTLET AND REMOVABLE TOP; LARGE CYLINDRICAL VESSEL FEATUR
(2) HEAVY DUTY STEEL STRUCTURAL MOUNTING BRACKETS WITH BASE PLATES INDUSTRIAL SUPPORTS - (2) HEAVY D
(6) SPRING LOADED INDUSTRIAL PRESSURE CONTROL VALVE ASSEMBLIES HYDRAULIC / GAS REGULATORS; (6) SPRIN
TUTHILL 60-16883
TUTHILL INDUSTRIAL FILTER ELEMENT MODEL 60-16883 VACUUM BLOWER SYSTEM COMPONENT. INDUSTRIAL FILTER E...
(3) LARGE CYLINDRICAL INDUSTRIAL COMPONENTS WITH CENTER BORE HEAVY MOLDED ASSEMBLIES ON PALLET - (3)
20 INDIVIDUAL SHELVING UNITS TOTAL SPAN: APPROXIMATELY 30 SHELF HEIGHT 87"
19 INDIVIDUAL SHELVING UNITS TOTAL SPAN: APPROXIMATELY 30 SHELF HEIGHT 87"
(5) INDUSTRIAL FRAME MATERIAL HANDLING CARTS ON CASTERS; QUANTITY: (5) CARTS CONSTRUCTION: WELDED ME
METAL UTILITY CART