Excess Metalworking and Process Equipment

Brolyn Auctions

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 200

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 200 lots

Year	Make	Model	Lot Description	Hammer Price
	DAVI	MCA	DAVI MCA 4-ROLL CNC PLATE ROLLING MACHINE. 30 INCH WIDE CAPACITY ROLL. 1/2 INCH CAPACITY. 4-ROLL PLATE BENDING/ROLLING MACHINE CNC TOUCHSCREEN CONTROL PANEL DAVI PLANETARY GUIDE TECHNOLOGY FOR SIDE ROLL ACTUATION SIMULTANEOUS PRE-BENDING AND ROLLING CAPABILITY BOTTOM ROLL CLAMPING SYSTEM FOR PLATE CONTROL CE MARKED RED PAINTED FINISH HEAVY-DUTY STEEL CONSTRUCTION S/N: AM24928 DAVI · MCA	🔒 Subscribe
2016	JASO	J4010	2016 JASO J4010 POWER CRANE. 2500KG CAPACITY. SERIAL NUMBER J4010-1040. 2016 · JASO · J4010	🔒 Subscribe
	AAON	RNA-090-E-0-3-CAADA-G83L0	AAON RN SERIES 90-TON AIR-COOLED PACKAGED ROOFTOP UNIT. MODEL RNA-090-E-0-3-CAADA-G83L0. NATURAL GAS HEAT AND A/C. FEATURES DOUBLE-WALL RIGID POLYURETHANE FOAM INSULATED CABINET CONSTRUCTION, BACKWARD CURVED PLENUM FANS FOR ENERGY-EFFICIENT AIRFLOW, SCROLL COMPRESSORS IN ISOLATED COMPARTMENT FOR EASE OF SERVICE, AND INTEGRATED ELECTRICAL PANEL WITH CIRCUIT BREAKERS. UNIT IS DESIGNED FOR COMMERCIAL HVAC APPLICATIONS WITH HIGH-EFFICIENCY COOLING CAPACITY. INCLUDES R-410A REFRIGERANT SYSTEM WITH MULTIPLE COMPRESSOR CIRCUITS. AAON · RNA-090-E-0-3-CAADA-G83L0	🔒 Subscribe
	YALE		12,000LB YALE LP FORKLIFT. 2-STAGE MAST. TRUCK WEIGHT 18026LBS. YALE	🔒 Subscribe
	CLAUSING COLCHESTER	15IN ENGINE LATHE	CLAUSING COLCHESTER 15IN ENGINE LATHE 277/480V. 72IN OVERALL BED LENGTH. WITH 3-JAW CHUCK, TAILSTOCK AND STEADY REST. GEARED HEAD WITH MULTI-SPEED SELECTOR. CLAUSING COLCHESTER · 15IN ENGINE LATHE	🔒 Subscribe
	KTC	EDB-640	KTC MODEL EDB-640 EDM DRILL MATE HOLE DRILLING EDM MACHINE. WITH WORK TANK, CONTROL PANEL AND MONITOR. KTC · EDB-640	🔒 Subscribe
2020	KUKA	KR 6 R900-2	2020 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM. 6 KG PAYLOAD CAPACITY, 901 MM REACH, 53 KG ROBOT WEIGHT. COMPATIBLE WITH KR C4SH CONTROLLER. S/N 1025572, ARTICLE NO. 10028053. 2020 · KUKA · KR 6 R900-2	🔒 Subscribe
2018	KUKA	KR 6 R900-2	2018 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM WITH KR C4 COMPACT CONTROLLER. 6 KG PAYLOAD CAPACITY, 901 MM REACH, 53 KG ROBOT WEIGHT. COMPATIBLE WITH KR C4SH CONTROLLER. ELECTRICAL: 600V, 3-PHASE. INCLUDES CABLING AND CONNECTORS. ON PALLET FOR TRANSPORT. 2018 · KUKA · KR 6 R900-2	🔒 Subscribe
2007	STAR MICRONICS	ECAS-20	2007 STAR MICRONICS ECAS-20 CNC SWISS-TYPE AUTOMATIC LATHE WITH FMB TURBO 3-26 BAR FEEDER. MAX MACHINING DIAMETER: 20MM (25/32 IN.). SPINDLE SPEED: UP TO 10,000 RPM. SPINDLE MOTOR: 2.2KW CONTINUOUS / 3.7KW (30 MIN). 10-AXIS CNC CONTROL. FRONT TOOL POST: 4 TURNING TOOLS. REAR TOOL POST: 2 TOOLS. LIVE TOOLING: 3 FRONT SLIDE, 3 REAR SLIDE. MAX DRILLING CAPACITY: 10MM. MAX TAPPING: M8 X P1.25. POWER: 6.0 KVA, AC 200V, 3 PHASE, 50/60 HZ. COOLANT TANK: 120 LITERS. WEIGHT: 1,600 KG. INCLUDES FMB TURBO 3-26 AUTOMATIC BAR FEEDER (S/N 1586-1), EDGE TECHNOLOGIES BAR MAGAZINE, TRI-MIST MIST COLLECTOR. S/N: 0438 2007 · STAR MICRONICS · ECAS-20	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN. TISKEN	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN. TISKEN	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN. TISKEN	🔒 Subscribe
	SOLOMON		2,500 KVA TRANSFORMER. 23,000 DELTA PRIMARY, 480 DELTA SECONDARY. NON-PCB OIL. WITH RADIATOR COOLING FINS. SOLOMON	🔒 Subscribe
	LITTELL	9030	LITTELL NO. 90 AUTOMATIC CENTERING COIL REEL. MODEL 9030. 10,000LB CAP. 20-24IN ID. MAX WIDTH 30IN. MAX OD 60IN. S/N: 39047-87 LITTELL · 9030	🔒 Subscribe
2007	HAAS	MINI MILL	2007 HAAS MINI MILL CNC VERTICAL MACHINING CENTER 40-TAPER SPINDLE TRAVELS: X-AXIS 16 IN., Y-AXIS 12 IN., Z-AXIS 10 IN. TABLE SIZE: 36 IN. X 12 IN. MAX TABLE LOAD: 500 LBS 10-STATION AUTOMATIC TOOL CHANGER TOOL-TO-TOOL TIME: 3.6 SECONDS RAPID TRAVERSE: 600 IPM CUTTING FEED RATE: UP TO 500 IPM HAAS CNC CONTROL FULLY ENCLOSED MACHINING AREA WITH SLIDING DOOR COOLANT SYSTEM 2007 · HAAS · MINI MILL	🔒 Subscribe
2008	COMBI-LIFT	CL60100LA24	2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. 3151 HOURS. MAST AND CARRIAGE HAVE BEEN REMOVED FOR TRANSPORT. S/N: 5790 2008 · COMBI-LIFT · CL60100LA24	🔒 Subscribe
2008	COMBI-LIFT	CL60100LA24	2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. HOURS 4708. MAST AND CARRIAGE HAVE BEEN REMOVED FOR TRANSPORT. 2008 · COMBI-LIFT · CL60100LA24	🔒 Subscribe
	HYSTER	80 LP	HYSTER 80 LP FORKLIFT. PARTS REPAIRABLE. NEEDS ALTERNATOR BRACKET, AND OTHER ODDS AND ENDS. COUNTER WEIGHT SAID TO BE LEAD INTERNAL. HYSTER · 80 LP	🔒 Subscribe
	KUKA	KR 6 R900	20XX KUKA KR 6 R900 6-AXIS INDUSTRIAL ROBOT WITH KR C4 CONTROLLER - KUKA KR 6 R900 SERIES 6-AXIS INDUSTRIAL ROBOT ARM WITH KR C4 COMPACT CONTROLLER CABINET. 6 KG PAYLOAD CAPACITY, 901 MM REACH. CONTROLLER CABINET INCLUDED ON PALLET. KUKA · KR 6 R900	🔒 Subscribe
	PARKER		PARKER HYDRAULIC HOSE CRIMP LARGER CAPACITY CYLINDER. PARKER	🔒 Subscribe
	SULLAIR	ES-8	SULLAIR ES-8 ROTARY SCREW AIR COMPRESSOR WITH ENCLOSED SOUND-ATTENUATED CABINET, DIGITAL CONTROLLER WITH DISPLAY PANEL, AND LIFT-OUT ACCESS PANELS. SULLAIR · ES-8	🔒 Subscribe
	HTC HYDRA-TOOL	1008	8FT HTC HYDRA-TOOL HYDRAULIC SHEAR. MODEL 1008. 10 GAUGE CAPACITY. S/N: M9154 HTC HYDRA-TOOL · 1008	🔒 Subscribe
2005	CLAUSING METOSA	SM2060VS	2005 CLAUSING METOSA SM2060VS SMART 20 CNC LATHE, 20 INCH SWING X 60 INCH BETWEEN CENTERS, VARIABLE SPEED, MADE IN SPAIN 2005 · CLAUSING METOSA · SM2060VS	🔒 Subscribe
	PROFAX		PROFAX WELDING POSITIONER, CHUCK TYPE, MOUNTED ON STEEL BASE PROFAX	🔒 Subscribe
2008	ROLL-IN	EF1459	ROLL-IN EF1459 VERTICAL BANDSAW. MFG DATE 10/08. 110V SINGLE PHASE. S/N: 08075EF 2008 · ROLL-IN · EF1459	🔒 Subscribe
	CROWN	SC4000 SERIES	4000LB CROWN SC4000 SERIES ELECTRIC FORKLIFT. 2 STAGE MAST. SIDESHIFTER ATTACHMENT. S/N 9A134109 CROWN · SC4000 SERIES	🔒 Subscribe
	PROFAX	WP-500	PROFAX WELDING POSITIONER W/ VARIABLE SPEED CONTROL. MODEL WP-500. 115 SINGLE PHASE. 500LB CAP. PROFAX · WP-500	🔒 Subscribe
	NATIONAL RIVET & MFG	500	NATIONAL RIVET & MFG RIVET MACHINE. MODEL 500. S/N: 4098 NATIONAL RIVET & MFG · 500	🔒 Subscribe
	CLAUSING COLCHESTER	15IN	15IN CLAUSING COLCHESTER ENGINE LATHE CLAUSING COLCHESTER · 15IN	🔒 Subscribe
	DALLAS INDUSTRIES	15763E	DALLAS INDUSTRIES UNCOILER. MODEL 15763E. CAPACITY 12X60X2500#. DALLAS INDUSTRIES · 15763E	🔒 Subscribe
	BRUNO	S325	2000 BRUNO S325 HYDRAULIC GUILLOTINE SHEAR WITH OPERATOR CONTROL PANEL, BACK GAUGE, BLADE HOLD-DOWN SYSTEM, EMERGENCY STOP, AND ELECTRICAL PANEL WITH DATA PLATE. HEAVY-DUTY BLUE PAINTED STEEL FRAME CONSTRUCTION. BRUNO · S325	🔒 Subscribe
	OHLER	K 400	2000 OHLER K 400 EXTRUSION COLD SAW. OHLER · K 400	🔒 Subscribe
	SERRMAC	TCS 40	SERRMAC TCS 40 COLUMN DRILLING AND MILLING MACHINE, PRISMATIC COLUMN, 50MM DRILLING CAPACITY ON C40 STEEL, M26 TAPPING CAPACITY, CM4 CONE ATTACHMENT, 145MM QUILL STROKE, 72MM SPINDLE QUILL DIAMETER, 2.2-3 KW MOTOR, 780 KG, MADE IN ITALY SERRMAC · TCS 40	🔒 Subscribe
	CLAUSING	20	CLAUSING 20 DRILL PRESS WITH SAFETY GUARDING, TOUCHSCREEN HMI CONTROL PANEL, AND VIBRATORY BOWL FEEDER. 230/460V. CLAUSING · 20	🔒 Subscribe
	DENGENSHA	RESISTANCE SPOT WELDING MACHINE	DENGENSHA RESISTANCE SPOT WELDING MACHINE PRESS-TYPE SPOT WELDER COPPER ALLOY ELECTRODE ARMS MULTI-SETTING CONTROL PANEL WITH DIGITAL TIMER HEAVY-DUTY STEEL FRAME CONSTRUCTION FLOOR-STANDING MODEL DENGENSHA · RESISTANCE SPOT WELDING MACHINE	🔒 Subscribe
2006	DG	NDX-50-46	2006 DG STATIONARY TYPE SPOT WELDING MACHINE. MODEL NDX-50-46. 460V 3PH. 57KVA. 2006 · DG · NDX-50-46	🔒 Subscribe
			T-SLOTTED ROTARY TABLE. 48IN X 66IN.	🔒 Subscribe
	J.H. DAY		5HP J.H. DAY MIXER J.H. DAY	🔒 Subscribe
	SYKES AN DYSON		SYKES AN DYSON T-SLOTTED ROTARY TABLE. 36 INCH X 36 INCH. SYKES AN DYSON	🔒 Subscribe
	THERMATOOL	SOLID STATE HF WELDER	THERMATOOL SOLID STATE HF WELDER FOR TUBE MILL WELDER. THERMATOOL SOLID STATE HIGH FREQUENCY WELDER, ENCLOSED STEEL CABINET THERMATOOL · SOLID STATE HF WELDER	🔒 Subscribe
	GENERAL ELECTRIC		1630 KVA GENERAL ELECTRIC OUTDOOR DUTY TRANSFORMER 4160V HIGH VOLTAGE, 665V LOW VOLTAGE. GENERAL ELECTRIC	🔒 Subscribe
	SOLOMON		1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576 SECONDARY. SOLOMON	🔒 Subscribe
	SOLOMON		1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576Y/333 SECONDARY. SOLOMON	🔒 Subscribe
	BRIDGEPORT	815	BRIDGEPORT 815 MANUAL SURFACE GRINDER WITH WALKER CERAMAX PERMANENT MAGNETIC CHUCK. FEATURES MANUAL TABLE TRAVERSE HANDWHEEL, VERTICAL COLUMN HEAD ADJUSTMENT, GRINDING WHEEL GUARD WITH COOLANT NOZZLE, AND PEDESTAL BASE CABINET. 240V ELECTRICAL. WALKER CERAMAX CHUCK PROVIDES STRONG PERMANENT MAGNETIC HOLDING FORCE FOR WORKPIECES. SUITABLE FOR PRECISION FLAT SURFACE GRINDING OPERATIONS. BRIDGEPORT · 815	🔒 Subscribe
	THERMATOOL		THERMATOOL HIGH VOLTAGE POWER SUPPLY CABINET, ENCLOSED STEEL CABINET, ELECTRICAL COMPONENTS, PUSH BUTTON CONTROLS, EMERGENCY STOP THERMATOOL	🔒 Subscribe
	THERMATOOL	SOLID STATE HF WELDER CABINET	THERMATOOL SOLID STATE HF WELDER CABINET FOR TUBE MILL WELDER. ENCLOSED STEEL CONSTRUCTION, HIGH VOLTAGE ELECTRICAL COMPONENTS. THERMATOOL · SOLID STATE HF WELDER CABINET	🔒 Subscribe
			SERVO PRESS ASSEMBLY STATION WITH KISTLER FORCE MONITOR - AUTOMATED SERVO PRESS ASSEMBLY STATION WITH KISTLER PRESS-FIT FORCE MONITORING SYSTEM. FEATURES KISTLER 2800 SERIES PROCESS MONITORING CONTROLLER WITH DIGITAL DISPLAYS FOR FORCE, TORQUE, AND ANGLE MEASUREMENT. INCLUDES TOUCHSCREEN HMI PANEL, SERVO PRESS COLUMN, PNEUMATIC COMPONENTS, AND STEEL WORKSTATION TABLE WITH FIXTURING. COMPLETE INTEGRATED SYSTEM FOR PRECISION PRESS-FIT AND ASSEMBLY OPERATIONS.	🔒 Subscribe
	THERMATOOL		THERMATOOL HIGH FREQUENCY OSCILLATOR / INDUCTION HEATING UNIT. FOR TUBE MILL WELDER. ENCLOSED CABINET DESIGN THERMATOOL	🔒 Subscribe
	PERFORMANCE FEEDERS	JE3200	2000 PERFORMANCE FEEDERS JE3200 VIBRATORY BOWL FEEDER SYSTEM WITH SOUND ENCLOSURE. FEATURES STAINLESS STEEL PERFORATED SOUND DAMPENING COVER, INLINE FEED TRACK, AND INTEGRATED CONTROL BOX. SUITABLE FOR AUTOMATED PARTS FEEDING AND ORIENTATION IN ASSEMBLY LINE APPLICATIONS. PERFORMANCE FEEDERS · JE3200	🔒 Subscribe
	PERFORMANCE FEEDERS	FC301	PERFORMANCE FEEDERS VIBRATORY BOWL FEEDER SYSTEM WITH STAINLESS STEEL PERFORATED SOUND ENCLOSURE. FEATURES REO-USA FC301 HOPPER CONTROLLER WITH DIGITAL DISPLAY, VIBRATORY BOWL WITH TOOLED TRACK INSIDE ENCLOSURE, AND INLINE FEED TRACK. COMPLETE SYSTEM ON PALLET FOR AUTOMATED PARTS FEEDING AND ORIENTATION. PERFORMANCE FEEDERS · FC301	🔒 Subscribe

Year	Make	Model	Description	Price
	DAVI	MCA	DAVI MCA 4-ROLL CNC PLATE ROLLING MACHINE. 30 INCH WIDE CAPACITY ROLL. 1/2 INCH CAPACITY. 4-ROLL PLATE BENDING/ROLLING MACHINE CNC TOUCHSCREEN CONTROL PANEL DAVI PLANETARY GUIDE TECHNOLOGY FOR SIDE ROLL ACTUATION SIMULTANEOUS PRE-BENDING AND ROLLING CAPABILITY BOTTOM ROLL CLAMPING SYSTEM FOR PLATE CONTROL CE MARKED RED PAINTED FINISH HEAVY-DUTY STEEL CONSTRUCTION S/N: AM24928	🔒 Subscribe
2016	JASO	J4010	2016 JASO J4010 POWER CRANE. 2500KG CAPACITY. SERIAL NUMBER J4010-1040.	🔒 Subscribe
	AAON	RNA-090-E-0-3-CAADA-G83L0	AAON RN SERIES 90-TON AIR-COOLED PACKAGED ROOFTOP UNIT. MODEL RNA-090-E-0-3-CAADA-G83L0. NATURAL GAS HEAT AND A/C. FEATURES DOUBLE-WALL RIGID POLYURETHANE FOAM INSULATED CABINET CONSTRUCTION, BACKWARD CURVED PLENUM FANS FOR ENERGY-EFFICIENT AIRFLOW, SCROLL COMPRESSORS IN ISOLATED COMPARTMENT FOR EASE OF SERVICE, AND INTEGRATED ELECTRICAL PANEL WITH CIRCUIT BREAKERS. UNIT IS DESIGNED FOR COMMERCIAL HVAC APPLICATIONS WITH HIGH-EFFICIENCY COOLING CAPACITY. INCLUDES R-410A REFRIGERANT SYSTEM WITH MULTIPLE COMPRESSOR CIRCUITS.	🔒 Subscribe
	YALE		12,000LB YALE LP FORKLIFT. 2-STAGE MAST. TRUCK WEIGHT 18026LBS.	🔒 Subscribe
	CLAUSING COLCHESTER	15IN ENGINE LATHE	CLAUSING COLCHESTER 15IN ENGINE LATHE 277/480V. 72IN OVERALL BED LENGTH. WITH 3-JAW CHUCK, TAILSTOCK AND STEADY REST. GEARED HEAD WITH MULTI-SPEED SELECTOR.	🔒 Subscribe
	KTC	EDB-640	KTC MODEL EDB-640 EDM DRILL MATE HOLE DRILLING EDM MACHINE. WITH WORK TANK, CONTROL PANEL AND MONITOR.	🔒 Subscribe
2020	KUKA	KR 6 R900-2	2020 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM. 6 KG PAYLOAD CAPACITY, 901 MM REACH, 53 KG ROBOT WEIGHT. COMPATIBLE WITH KR C4SH CONTROLLER. S/N 1025572, ARTICLE NO. 10028053.	🔒 Subscribe
2018	KUKA	KR 6 R900-2	2018 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM WITH KR C4 COMPACT CONTROLLER. 6 KG PAYLOAD CAPACITY, 901 MM REACH, 53 KG ROBOT WEIGHT. COMPATIBLE WITH KR C4SH CONTROLLER. ELECTRICAL: 600V, 3-PHASE. INCLUDES CABLING AND CONNECTORS. ON PALLET FOR TRANSPORT.	🔒 Subscribe
2007	STAR MICRONICS	ECAS-20	2007 STAR MICRONICS ECAS-20 CNC SWISS-TYPE AUTOMATIC LATHE WITH FMB TURBO 3-26 BAR FEEDER. MAX MACHINING DIAMETER: 20MM (25/32 IN.). SPINDLE SPEED: UP TO 10,000 RPM. SPINDLE MOTOR: 2.2KW CONTINUOUS / 3.7KW (30 MIN). 10-AXIS CNC CONTROL. FRONT TOOL POST: 4 TURNING TOOLS. REAR TOOL POST: 2 TOOLS. LIVE TOOLING: 3 FRONT SLIDE, 3 REAR SLIDE. MAX DRILLING CAPACITY: 10MM. MAX TAPPING: M8 X P1.25. POWER: 6.0 KVA, AC 200V, 3 PHASE, 50/60 HZ. COOLANT TANK: 120 LITERS. WEIGHT: 1,600 KG. INCLUDES FMB TURBO 3-26 AUTOMATIC BAR FEEDER (S/N 1586-1), EDGE TECHNOLOGIES BAR MAGAZINE, TRI-MIST MIST COLLECTOR. S/N: 0438	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN.	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN.	🔒 Subscribe
	TISKEN		10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN.	🔒 Subscribe
	SOLOMON		2,500 KVA TRANSFORMER. 23,000 DELTA PRIMARY, 480 DELTA SECONDARY. NON-PCB OIL. WITH RADIATOR COOLING FINS.	🔒 Subscribe
	LITTELL	9030	LITTELL NO. 90 AUTOMATIC CENTERING COIL REEL. MODEL 9030. 10,000LB CAP. 20-24IN ID. MAX WIDTH 30IN. MAX OD 60IN. S/N: 39047-87	🔒 Subscribe
2007	HAAS	MINI MILL	2007 HAAS MINI MILL CNC VERTICAL MACHINING CENTER 40-TAPER SPINDLE TRAVELS: X-AXIS 16 IN., Y-AXIS 12 IN., Z-AXIS 10 IN. TABLE SIZE: 36 IN. X 12 IN. MAX TABLE LOAD: 500 LBS 10-STATION AUTOMATIC TOOL CHANGER TOOL-TO-TOOL TIME: 3.6 SECONDS RAPID TRAVERSE: 600 IPM CUTTING FEED RATE: UP TO 500 IPM HAAS CNC CONTROL FULLY ENCLOSED MACHINING AREA WITH SLIDING DOOR COOLANT SYSTEM	🔒 Subscribe
2008	COMBI-LIFT	CL60100LA24	2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. 3151 HOURS. MAST AND CARRIAGE HAVE BEEN REMOVED FOR TRANSPORT. S/N: 5790	🔒 Subscribe
2008	COMBI-LIFT	CL60100LA24	2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. HOURS 4708. MAST AND CARRIAGE HAVE BEEN REMOVED FOR TRANSPORT.	🔒 Subscribe
	HYSTER	80 LP	HYSTER 80 LP FORKLIFT. PARTS REPAIRABLE. NEEDS ALTERNATOR BRACKET, AND OTHER ODDS AND ENDS. COUNTER WEIGHT SAID TO BE LEAD INTERNAL.	🔒 Subscribe
	KUKA	KR 6 R900	20XX KUKA KR 6 R900 6-AXIS INDUSTRIAL ROBOT WITH KR C4 CONTROLLER - KUKA KR 6 R900 SERIES 6-AXIS INDUSTRIAL ROBOT ARM WITH KR C4 COMPACT CONTROLLER CABINET. 6 KG PAYLOAD CAPACITY, 901 MM REACH. CONTROLLER CABINET INCLUDED ON PALLET.	🔒 Subscribe
	PARKER		PARKER HYDRAULIC HOSE CRIMP LARGER CAPACITY CYLINDER.	🔒 Subscribe
	SULLAIR	ES-8	SULLAIR ES-8 ROTARY SCREW AIR COMPRESSOR WITH ENCLOSED SOUND-ATTENUATED CABINET, DIGITAL CONTROLLER WITH DISPLAY PANEL, AND LIFT-OUT ACCESS PANELS.	🔒 Subscribe
	HTC HYDRA-TOOL	1008	8FT HTC HYDRA-TOOL HYDRAULIC SHEAR. MODEL 1008. 10 GAUGE CAPACITY. S/N: M9154	🔒 Subscribe
2005	CLAUSING METOSA	SM2060VS	2005 CLAUSING METOSA SM2060VS SMART 20 CNC LATHE, 20 INCH SWING X 60 INCH BETWEEN CENTERS, VARIABLE SPEED, MADE IN SPAIN	🔒 Subscribe
	PROFAX		PROFAX WELDING POSITIONER, CHUCK TYPE, MOUNTED ON STEEL BASE	🔒 Subscribe
2008	ROLL-IN	EF1459	ROLL-IN EF1459 VERTICAL BANDSAW. MFG DATE 10/08. 110V SINGLE PHASE. S/N: 08075EF	🔒 Subscribe
	CROWN	SC4000 SERIES	4000LB CROWN SC4000 SERIES ELECTRIC FORKLIFT. 2 STAGE MAST. SIDESHIFTER ATTACHMENT. S/N 9A134109	🔒 Subscribe
	PROFAX	WP-500	PROFAX WELDING POSITIONER W/ VARIABLE SPEED CONTROL. MODEL WP-500. 115 SINGLE PHASE. 500LB CAP.	🔒 Subscribe
	NATIONAL RIVET & MFG	500	NATIONAL RIVET & MFG RIVET MACHINE. MODEL 500. S/N: 4098	🔒 Subscribe
	CLAUSING COLCHESTER	15IN	15IN CLAUSING COLCHESTER ENGINE LATHE	🔒 Subscribe
	DALLAS INDUSTRIES	15763E	DALLAS INDUSTRIES UNCOILER. MODEL 15763E. CAPACITY 12X60X2500#.	🔒 Subscribe
	BRUNO	S325	2000 BRUNO S325 HYDRAULIC GUILLOTINE SHEAR WITH OPERATOR CONTROL PANEL, BACK GAUGE, BLADE HOLD-DOWN SYSTEM, EMERGENCY STOP, AND ELECTRICAL PANEL WITH DATA PLATE. HEAVY-DUTY BLUE PAINTED STEEL FRAME CONSTRUCTION.	🔒 Subscribe
	OHLER	K 400	2000 OHLER K 400 EXTRUSION COLD SAW.	🔒 Subscribe
	SERRMAC	TCS 40	SERRMAC TCS 40 COLUMN DRILLING AND MILLING MACHINE, PRISMATIC COLUMN, 50MM DRILLING CAPACITY ON C40 STEEL, M26 TAPPING CAPACITY, CM4 CONE ATTACHMENT, 145MM QUILL STROKE, 72MM SPINDLE QUILL DIAMETER, 2.2-3 KW MOTOR, 780 KG, MADE IN ITALY	🔒 Subscribe
	CLAUSING	20	CLAUSING 20 DRILL PRESS WITH SAFETY GUARDING, TOUCHSCREEN HMI CONTROL PANEL, AND VIBRATORY BOWL FEEDER. 230/460V.	🔒 Subscribe
	DENGENSHA	RESISTANCE SPOT WELDING MACHINE	DENGENSHA RESISTANCE SPOT WELDING MACHINE PRESS-TYPE SPOT WELDER COPPER ALLOY ELECTRODE ARMS MULTI-SETTING CONTROL PANEL WITH DIGITAL TIMER HEAVY-DUTY STEEL FRAME CONSTRUCTION FLOOR-STANDING MODEL	🔒 Subscribe
2006	DG	NDX-50-46	2006 DG STATIONARY TYPE SPOT WELDING MACHINE. MODEL NDX-50-46. 460V 3PH. 57KVA.	🔒 Subscribe
			T-SLOTTED ROTARY TABLE. 48IN X 66IN.	🔒 Subscribe
	J.H. DAY		5HP J.H. DAY MIXER	🔒 Subscribe
	SYKES AN DYSON		SYKES AN DYSON T-SLOTTED ROTARY TABLE. 36 INCH X 36 INCH.	🔒 Subscribe
	THERMATOOL	SOLID STATE HF WELDER	THERMATOOL SOLID STATE HF WELDER FOR TUBE MILL WELDER. THERMATOOL SOLID STATE HIGH FREQUENCY WELDER, ENCLOSED STEEL CABINET	🔒 Subscribe
	GENERAL ELECTRIC		1630 KVA GENERAL ELECTRIC OUTDOOR DUTY TRANSFORMER 4160V HIGH VOLTAGE, 665V LOW VOLTAGE.	🔒 Subscribe
	SOLOMON		1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576 SECONDARY.	🔒 Subscribe
	SOLOMON		1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576Y/333 SECONDARY.	🔒 Subscribe
	BRIDGEPORT	815	BRIDGEPORT 815 MANUAL SURFACE GRINDER WITH WALKER CERAMAX PERMANENT MAGNETIC CHUCK. FEATURES MANUAL TABLE TRAVERSE HANDWHEEL, VERTICAL COLUMN HEAD ADJUSTMENT, GRINDING WHEEL GUARD WITH COOLANT NOZZLE, AND PEDESTAL BASE CABINET. 240V ELECTRICAL. WALKER CERAMAX CHUCK PROVIDES STRONG PERMANENT MAGNETIC HOLDING FORCE FOR WORKPIECES. SUITABLE FOR PRECISION FLAT SURFACE GRINDING OPERATIONS.	🔒 Subscribe
	THERMATOOL		THERMATOOL HIGH VOLTAGE POWER SUPPLY CABINET, ENCLOSED STEEL CABINET, ELECTRICAL COMPONENTS, PUSH BUTTON CONTROLS, EMERGENCY STOP	🔒 Subscribe
	THERMATOOL	SOLID STATE HF WELDER CABINET	THERMATOOL SOLID STATE HF WELDER CABINET FOR TUBE MILL WELDER. ENCLOSED STEEL CONSTRUCTION, HIGH VOLTAGE ELECTRICAL COMPONENTS.	🔒 Subscribe
			SERVO PRESS ASSEMBLY STATION WITH KISTLER FORCE MONITOR - AUTOMATED SERVO PRESS ASSEMBLY STATION WITH KISTLER PRESS-FIT FORCE MONITORING SYSTEM. FEATURES KISTLER 2800 SERIES PROCESS MONITORING CONTROLLER WITH DIGITAL DISPLAYS FOR FORCE, TORQUE, AND ANGLE MEASUREMENT. INCLUDES TOUCHSCREEN HMI PANEL, SERVO PRESS COLUMN, PNEUMATIC COMPONENTS, AND STEEL WORKSTATION TABLE WITH FIXTURING. COMPLETE INTEGRATED SYSTEM FOR PRECISION PRESS-FIT AND ASSEMBLY OPERATIONS.	🔒 Subscribe
	THERMATOOL		THERMATOOL HIGH FREQUENCY OSCILLATOR / INDUCTION HEATING UNIT. FOR TUBE MILL WELDER. ENCLOSED CABINET DESIGN	🔒 Subscribe
	PERFORMANCE FEEDERS	JE3200	2000 PERFORMANCE FEEDERS JE3200 VIBRATORY BOWL FEEDER SYSTEM WITH SOUND ENCLOSURE. FEATURES STAINLESS STEEL PERFORATED SOUND DAMPENING COVER, INLINE FEED TRACK, AND INTEGRATED CONTROL BOX. SUITABLE FOR AUTOMATED PARTS FEEDING AND ORIENTATION IN ASSEMBLY LINE APPLICATIONS.	🔒 Subscribe
	PERFORMANCE FEEDERS	FC301	PERFORMANCE FEEDERS VIBRATORY BOWL FEEDER SYSTEM WITH STAINLESS STEEL PERFORATED SOUND ENCLOSURE. FEATURES REO-USA FC301 HOPPER CONTROLLER WITH DIGITAL DISPLAY, VIBRATORY BOWL WITH TOOLED TRACK INSIDE ENCLOSURE, AND INLINE FEED TRACK. COMPLETE SYSTEM ON PALLET FOR AUTOMATED PARTS FEEDING AND ORIENTATION.	🔒 Subscribe

DAVI MCA

DAVI MCA 4-ROLL CNC PLATE ROLLING MACHINE. 30 INCH WIDE CAPACITY ROLL. 1/2 INCH CAPACITY. 4-ROLL PLA...

2016 JASO J4010

2016 JASO J4010 POWER CRANE. 2500KG CAPACITY. SERIAL NUMBER J4010-1040....

AAON RNA-090-E-0-3-CAADA-G83L0

AAON RN SERIES 90-TON AIR-COOLED PACKAGED ROOFTOP UNIT. MODEL RNA-090-E-0-3-CAADA-G83L0. NATURAL GAS...

YALE

12,000LB YALE LP FORKLIFT. 2-STAGE MAST. TRUCK WEIGHT 18026LBS....

CLAUSING COLCHESTER 15IN ENGINE LATHE

CLAUSING COLCHESTER 15IN ENGINE LATHE 277/480V. 72IN OVERALL BED LENGTH. WITH 3-JAW CHUCK, TAILSTOCK...

KTC EDB-640

KTC MODEL EDB-640 EDM DRILL MATE HOLE DRILLING EDM MACHINE. WITH WORK TANK, CONTROL PANEL AND MONITO...

2020 KUKA KR 6 R900-2

2020 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM. 6 KG PAYLOAD CAPACITY, 901 MM REACH, 53 KG ROBOT ...

2018 KUKA KR 6 R900-2

2018 KUKA KR 6 R900-2 6-AXIS INDUSTRIAL ROBOT ARM WITH KR C4 COMPACT CONTROLLER. 6 KG PAYLOAD CAPACI...

2007 STAR MICRONICS ECAS-20

2007 STAR MICRONICS ECAS-20 CNC SWISS-TYPE AUTOMATIC LATHE WITH FMB TURBO 3-26 BAR FEEDER. MAX MACHI...

TISKEN

10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN....

TISKEN

10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN....

TISKEN

10 STAND TISKEN ROLL FORMER. SPINDLE SIZE APPEARS TO BE 2IN....

SOLOMON

2,500 KVA TRANSFORMER. 23,000 DELTA PRIMARY, 480 DELTA SECONDARY. NON-PCB OIL. WITH RADIATOR COOLING...

LITTELL 9030

LITTELL NO. 90 AUTOMATIC CENTERING COIL REEL. MODEL 9030. 10,000LB CAP. 20-24IN ID. MAX WIDTH 30IN. ...

2007 HAAS MINI MILL

2007 HAAS MINI MILL CNC VERTICAL MACHINING CENTER 40-TAPER SPINDLE TRAVELS: X-AXIS 16 IN., Y-AXIS 12...

2008 COMBI-LIFT CL60100LA24

2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. 3151 HOURS. MAST AND CARRIAGE...

2008 COMBI-LIFT CL60100LA24

2008 COMBI-LIFT CL60100LA24 FORKLIFT. 10,000LB CAPACITY. 2-STAGE MAST. HOURS 4708. MAST AND CARRIAGE...

HYSTER 80 LP

HYSTER 80 LP FORKLIFT. PARTS REPAIRABLE. NEEDS ALTERNATOR BRACKET, AND OTHER ODDS AND ENDS. COUNTER ...

KUKA KR 6 R900

20XX KUKA KR 6 R900 6-AXIS INDUSTRIAL ROBOT WITH KR C4 CONTROLLER - KUKA KR 6 R900 SERIES 6-AXIS IND...

PARKER

PARKER HYDRAULIC HOSE CRIMP LARGER CAPACITY CYLINDER....

SULLAIR ES-8

SULLAIR ES-8 ROTARY SCREW AIR COMPRESSOR WITH ENCLOSED SOUND-ATTENUATED CABINET, DIGITAL CONTROLLER ...

HTC HYDRA-TOOL 1008

8FT HTC HYDRA-TOOL HYDRAULIC SHEAR. MODEL 1008. 10 GAUGE CAPACITY. S/N: M9154...

2005 CLAUSING METOSA SM2060VS

2005 CLAUSING METOSA SM2060VS SMART 20 CNC LATHE, 20 INCH SWING X 60 INCH BETWEEN CENTERS, VARIABLE ...

PROFAX

PROFAX WELDING POSITIONER, CHUCK TYPE, MOUNTED ON STEEL BASE...

2008 ROLL-IN EF1459

ROLL-IN EF1459 VERTICAL BANDSAW. MFG DATE 10/08. 110V SINGLE PHASE. S/N: 08075EF...

CROWN SC4000 SERIES

4000LB CROWN SC4000 SERIES ELECTRIC FORKLIFT. 2 STAGE MAST. SIDESHIFTER ATTACHMENT. S/N 9A134109...

PROFAX WP-500

PROFAX WELDING POSITIONER W/ VARIABLE SPEED CONTROL. MODEL WP-500. 115 SINGLE PHASE. 500LB CAP....

NATIONAL RIVET & MFG 500

NATIONAL RIVET & MFG RIVET MACHINE. MODEL 500. S/N: 4098...

CLAUSING COLCHESTER 15IN

15IN CLAUSING COLCHESTER ENGINE LATHE...

DALLAS INDUSTRIES 15763E

DALLAS INDUSTRIES UNCOILER. MODEL 15763E. CAPACITY 12X60X2500#....

BRUNO S325

2000 BRUNO S325 HYDRAULIC GUILLOTINE SHEAR WITH OPERATOR CONTROL PANEL, BACK GAUGE, BLADE HOLD-DOWN ...

OHLER K 400

2000 OHLER K 400 EXTRUSION COLD SAW....

SERRMAC TCS 40

SERRMAC TCS 40 COLUMN DRILLING AND MILLING MACHINE, PRISMATIC COLUMN, 50MM DRILLING CAPACITY ON C40 ...

CLAUSING 20

CLAUSING 20 DRILL PRESS WITH SAFETY GUARDING, TOUCHSCREEN HMI CONTROL PANEL, AND VIBRATORY BOWL FEED...

DENGENSHA RESISTANCE SPOT WELDING MACHINE

DENGENSHA RESISTANCE SPOT WELDING MACHINE PRESS-TYPE SPOT WELDER COPPER ALLOY ELECTRODE ARMS MULTI-S...

2006 DG NDX-50-46

2006 DG STATIONARY TYPE SPOT WELDING MACHINE. MODEL NDX-50-46. 460V 3PH. 57KVA....

T-SLOTTED ROTARY TABLE. 48IN X 66IN.

J.H. DAY

5HP J.H. DAY MIXER...

SYKES AN DYSON

SYKES AN DYSON T-SLOTTED ROTARY TABLE. 36 INCH X 36 INCH....

THERMATOOL SOLID STATE HF WELDER

THERMATOOL SOLID STATE HF WELDER FOR TUBE MILL WELDER. THERMATOOL SOLID STATE HIGH FREQUENCY WELDER,...

GENERAL ELECTRIC

1630 KVA GENERAL ELECTRIC OUTDOOR DUTY TRANSFORMER 4160V HIGH VOLTAGE, 665V LOW VOLTAGE....

SOLOMON

1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576 SECONDARY....

SOLOMON

1630KVA SOLOMON TRANSFORMER. 23,000 DELTA PRIMARY, 576Y/333 SECONDARY....

BRIDGEPORT 815

BRIDGEPORT 815 MANUAL SURFACE GRINDER WITH WALKER CERAMAX PERMANENT MAGNETIC CHUCK. FEATURES MANUAL ...

THERMATOOL

THERMATOOL HIGH VOLTAGE POWER SUPPLY CABINET, ENCLOSED STEEL CABINET, ELECTRICAL COMPONENTS, PUSH BU...

THERMATOOL SOLID STATE HF WELDER CABINET

THERMATOOL SOLID STATE HF WELDER CABINET FOR TUBE MILL WELDER. ENCLOSED STEEL CONSTRUCTION, HIGH VOL...

SERVO PRESS ASSEMBLY STATION WITH KISTLER FORCE MONITOR - AUTOMATED SERVO PRESS ASSEMBLY STATION WIT

THERMATOOL

THERMATOOL HIGH FREQUENCY OSCILLATOR / INDUCTION HEATING UNIT. FOR TUBE MILL WELDER. ENCLOSED CABINE...

PERFORMANCE FEEDERS JE3200

2000 PERFORMANCE FEEDERS JE3200 VIBRATORY BOWL FEEDER SYSTEM WITH SOUND ENCLOSURE. FEATURES STAINLES...

PERFORMANCE FEEDERS FC301

PERFORMANCE FEEDERS VIBRATORY BOWL FEEDER SYSTEM WITH STAINLESS STEEL PERFORATED SOUND ENCLOSURE. FE...

1 2 3 4 Next >>

Recent Searches

Login

Reset Password

Excess Metalworking and Process Equipment

Save to Project Folder

Print Options

Unlock Unlimited Printing