Quarterly Bakery and Snack Food Processing and Packaging Equipment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
193
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
EXCEL | SFE-800 NF |
EXCEL SFE-800 NF FULLY AUTOMATIC IN-LINE POLY BUNDLER WITH: SPEED: UP TO 25 BUNDLES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) INFEED CONVEYOR: WIDTH: 26 INCHES HEIGHT FROM FLOOR: 36 INCHES SEAL BAR: 31 INCHES APERTURE DIMENSIONS WIDTH: 29 INCHES HEIGHT: 20 INCHES DISCHARGE CONVEYOR: WIDTH: 26 INCHES HEIGHT FROM FLOOR: 36 INCHES OVERALL DEMENSIONS: LENTH 162 INCHES WIDTH 56 INCHES HEIGHT 84 INCHES ELECTRICAL: 220 VOLTS 60 HZ 3 PHASE LAST RAN 12-PACK AND 24-PACK BEVERAGE (CANS) TRAYS
|
🔒 Subscribe | |
|
|
LANTECH | Q-AUTO 1000 |
LANTECH Q-AUTO 1000 TURNTABLE STRETCH WRAPPER WITH: OUTPUT: UP TO 45 LOADS PER HOUR, DEPENDING ON LOAD SIZE AND WRAP COUNTS MAXIMUM LOAD SIZE: 54 INCHES WIDE X 48 INCHES LONG X 92 INCHES TALL MINIMUM LOAD SIZE: 36 INCHES WIDE X 36 INCHES LONG X 24 INCHES TALL 200% FILM PRE-STRETCH FILM ROLL DIAMETER: 10 INCHES FILM ROLL WIDTH: 20 INCHES 90 DEGREE FINISHED PALLET DISCHARGE 1 SECTION OF INFEED AND OUTFEED CONVEYOR INDEPENDENT CARRIAGE UP/DOWN SPEED CONTROL INDEPENDENT TOP AND BOTTOM WRAP COUNTS ADJUSTABLE TURNTABLE SPEEDS PNEUMATIC FILM CLAMP ASSEMBLY
|
🔒 Subscribe | |
|
|
MASTERLY |
MASTERLY STAINLESS STEEL RIBBON BLENDER WITH: SINGLE SHAFT RIBBON WORKING CAPACITY: 500 POUNDS (DEPENDING ON PRODUCT) TROUGH SIZE: WIDTH: 22 INCHES LENGTH: 49 INCHES DEPTH: 24 INCHES DISCHARGE GATE: DIAMETER: 5 INCHES OVERALL DIMENSIONS: LENGTH: 80 INCHES WIDTH: 30 INCHES HEIGHT: 68 INCHES ELECTRICS: 240 VOLTS 60 HERTZ 3 PHASE STAINLESS STEEL CONSTRUCTION ON CASTORS
|
🔒 Subscribe | ||
|
|
2018 | ADVANTAGE | BCD-10A |
2018 ADVANTAGE BCD-10A AIR COOLED GLYCOL CHILLER - USED ADVANTAGE GLYCOL CHILLER WITH: COOLING CAPACITY: @ 25 F: 62,412 BTU AN HOUR @ 50 F: 117,600 BTU AN HOUR RESERVOIR CAPACITY: 25 GALLONS COMPRESSOR: HORSEPOWER: 10 TYPE: DIGITAL SCROLL PROCESS PUMP: HORSEPOWER: 2 PSI: 48 TYPE: CENTRIFUGAL AIR-COOLED CONDENSER: TYPE: FAN CFM: 10,000 AMBIENT TEMPERATURE: 95F MOUNTED ON CASTERS FOR MOBILITY ELECTRICAL: 230 VOLTS, 60 HERTZ, 3 PHASE S/N: 160900
|
🔒 Subscribe |
|
|
TECH FOR FOOD | ROLL IT |
TECH FOR FOOD ROLL IT FOOD ROLLER WITH: THE ROLLING AND WRAPPING MACHINE CAN BE OPERATED IN THE BASIC FUNCTIONS OF ROLLING, WRAPPING, ROLLING OF FILLED SLICES AND FOLDING. PRODUCITON SPEED: UP TO 100 CENTIMETERS A SECOND 50 CYCLES PER MINUTE PRODUCT DIMENSIONS: USABLE ROLL WIDTH: 420 MILLIMETERS USABLE ROLL DIAMETER: 8-73 MILLIMETERS ROLLING PERFORMANCE: 1 TRACK UP TO 50 ROLLS PER MINUTE 2 TRACKS UP TO 100 ROLLS PER MINUTE 4 TRACKS UP TO 200 ROLLS/MIN INFEED HEIGHT: 42 INCHES (APPROXIMATELY) TOUCH SCREEN CONTROLS MOUNTED ON STAINLESS STEEL LEGS STAINLESS STEEL CONTRUCTION ELECTRICAL: 230 VOLTS, 50/60 HERTZ, 3 PHASE, 13 AMPS
|
🔒 Subscribe | |
|
|
PEERLESS | PBD 6 |
PEERLESS PBD 6 BREAD AND DOUGH DIVIDER WITH: STAINLESS STEEL HOPPER: 28 INCHES LONG X 26 INCHES DEPTH X 16 INCHES WIDTH ROLLER WIDTH: 28 INCHES CONVEYOR: 54 INCHES LENGTH X 12 INCHES WIDTH ALLEN BRADLEY PANEL VIEW 100 6 POCKET BREAD DIVIDER RATES: 60-180 PIECES PER MINUTE DEPENDING ON NUMBER OF HEADS, MATERIALS, AND APPLICATION PRODUCT RANGE FOR: WHITE BREADS VARIETY BREADS ETHNIC BREADS FROZEN DOUGH 6-60 OUNCES ALL DRIVEN BY HYDRAULIC CYLINDERS: FLOUR DUSTER RAM KNIFE DIVISION BOX EJECTOR HYDRAULIC PUMP VOLTAGE480 ELECTRICAL PHASE3PH HERTZ60HZ
|
🔒 Subscribe | |
|
|
WEIGHPACK | COMBI SCALE 14 HEAD |
WEIGHPACK COMBI SCALE 14 HEAD 2.5L COMBINATION WEIGHER - USED WEIGHPACK HEAD SCALE WITH: NUMBER OF HEADS: 14 WEIGH VOLUME: 2.5 LITERS DIMPLED BUCKETS ADJUSTABLE HEIGHT SCREW LEVELING LEGS STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
A-ONE | CDL-600-90-S |
A-ONE CDL-600-90-S STAINLESS STEEL SINGLE COLUMN TOTE DUMPER WITH: LIFTING CAPACITY: 600 POUNDS TOTE TYPE: STANDARD 600 POUND V-MAG CART APPROXIMATE CART DIMENSIONS: LENGTH: 25 INCHES WIDTH: 24 INCHES DEGREE OF DUMP: 35 WITH A STANDARD V-MAG CART APPROXIMATE DUMP HEIGHT: 86 INCHES CHAIN DRIVEN LIFT COLUMN THICKNESS: 3/16 INCH FLOOR LEVEL LOADING STAINLESS STEEL CONSTRUCTION ELECTRICAL: 208 VOLTS, 3 PHASE
|
🔒 Subscribe | |
|
|
METTLER TOLEDO SAFELINE |
METTLER TOLEDO SAFELINE STAINLESS STEEL METAL DETECTOR - USED SAFELINE METAL DETECTOR WITH: APERTURE DIMENSIONS: WIDTH: 12 INCHES HEIGHT: 2 INCHES CONVEYOR WIDTH: 6.5 INCHES PUSH-ARM REJECT AIR REQUIRED STAINLESS STEEL CONSTRUCTION MOUNTED ON CASTERS
|
🔒 Subscribe | ||
|
|
FELDMEIER |
FELDMEIER STAINLESS STEEL TANK - USED FELDMEIER STAINLESS STEEL TANK WITH: CAPACITY: APPROXIMATELY 250 GALLONS CONICAL BOTTOM BOTTOM CENTER DRAIN DIAMETER: 3 INCHES STAINLESS STEEL CONSTRUCTION MOUNTED ON CASTERS APPROXIMATE OVERALL DIMENSIONS (INCHES): 40 DIAMETER X 96 HIGH
|
🔒 Subscribe | ||
|
|
MOLINE |
MOLINE SHEETER WITH: BELT DIMENSIONS: LENGTH: APPROXIMATELY 24 FEET WIDTH: 24 INCHES HEIGHT: 36 INCHES 7 SEPARATING WHEELS 3 INCHES BETWEEN WHEELS GUILLOTINE CUTTER VARIABLE FREQUENCY DRIVE LECTRICAL: VOLTS: 230 FREQUENCY: 60 HZ PHASE 3 MOUNTED ON STAINLESS STEEL FRAME WITH CASTERS
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL Z CONFIGURATION BUCKET CONVEYOR - USED BUCKET CONVEYOR WITH: BUCKET DIMENTSIONS: LENGTH: 10 INCHES WIDTH: 3 INCHES DEPTH: 2 INCHES INFEED: HEIGHT: 19 INCHES LENGTH: 18 INCHES OUTFEED LENGTH: 28 INCHES DISCHARGE HEIGHT: 12 FEET OVERALL HEIGHT: 163 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
8'L X 24"W LINEAR VIBRATORY FEEDER - USED LINEAR VIBRATORY FEEDER WITH: CONVEYOR DIMENSIONS: LENGTH: 102 INCHES WIDTH: 24 INCHES DISCHARGE DIMENSIONS: LENGTH: 5 INCHES WIDTH: 22 INCHES HEIGHT: 22 INCHES PUSH BUTTON CONTROLS STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 20 INCHES ROLLER WIDTH: 51.5 INCHES ROLLER DIAMETER: 2.5 INCHES ROLLER CENTER LENGTH: 6 INCHES ADJUSTABLE LEG HEIGHT OVERALL DIMENSIONS: LENGTH: 60 INCHES WIDTH: 63 INCHES HEIGHT: 29.5 INCHES MOTOR: .75 HORSEPOWER, 1725 RPM ELECTRICAL: 208-230/460 VOLTS, 60 HZ, 3.2-3/1.5 AMPS, PHASE 3
|
🔒 Subscribe | |||
|
|
2020 | PLAN IT PACKAGING | INC. CONVEYOR |
2020 PLAN IT PACKAGING INC. CONVEYOR CLEATED BLUE BELT INCLINE CONVEYOR - USED PLAN IT PACKAGING CLEATED INCLINE CONVEYOR WITH: VARIABLE SPEED DRIVE BELT WIDTH: 16 INCHES OVERALL HEIGHT: 17.5 FEET INFEED HEIGHT: 47 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: 3 PHASE, 50-60 HZ, 230 VOLTS, 3.38 AMPS S/N: 20104
|
🔒 Subscribe |
|
|
VWR SCIENTIFIC | 1450M |
VWR SCIENTIFIC 1450M STAINLESS STEEL VACUUM OVEN - USED VWR SCIENTIFIC VACUUM OVEN WITH: CAPACITY: 4.5 CUBIC FEET TEMPERATURE RANGE: MINIMUM: 40 C MAXIMUM: 260 C INTERIOR DIMENSIONS: WIDTH: 18 INCHES DEPTH: 24 INCHES HEIGHT: 18 INCHES DIGITAL TEMPERATURE DISPLAY EXTERIOR DIMENSIONS: WIDTH: 30 INCHES DEPTH: 28.5 INCHES HEIGHT: 24 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: 1 PHASE, 50/60 HZ, 120 VOLTS MODEL: 1450M SERIAL: 0100397
|
🔒 Subscribe | |
|
|
2017 | ESCHERICH | ESUC 112 |
2017 ESCHERICH ESUC 112 PHARMACEUTICAL DUST COLLECTOR WITH: AIR INTAKE DIAMETER: 150 MM EXHAUST AIR OUTPUT DIAMETER: 110 MM MAXIMUM AIR FLOW: 900 CUBIC METERS PER HOUR COMPRESSED AIR INPUT: 4 - 8 BAR OVERALL DIMENSIONS: WIDTH: 32 INCHES HEIGHT: 69 INCHES DEPTH: 25 INCHES ELECTRICAL: 3X400 VOLTS S/N: LES1XX-01-193
|
🔒 Subscribe |
|
|
THERMO SCIENTIFIC | VO1824A |
THERMO SCIENTIFIC VO1824A LINDBERG/BLUE VACUUM OVEN - USED THERMO SCIENTIFIC VACUUM OVEN WITH: CAPACITY: 4.5 CUBIC FEET MAXIMUM TEMPERATURE: 260 C INTERNAL DIMENSIONS: WIDTH: 18 INCHES DEPTH: 24 INCHES HEIGHT: 18 INCHES DIGITAL MICROPROCESSOR CONTROL LED DISPLAY CORROSION RESISTANT STAINLESS STEEL INTERIOR OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 27 INCHES HEIGHT: 35 INCHES PAINTED STEEL EXTERIOR ELECTRICAL: 50/60 HZ, 115 VOLTS, 13 AMPS MODEL: VO1824A SERIAL: V13Z-515518-VZ
|
🔒 Subscribe | |
|
|
PLASTIC MAT TOP 98" DISCHARGE INCLINE CONVEYOR - USED CONVEYOR WITH: INFEED HEIGHT: 39 INCHES PLASTIC MAT TOP BELT WIDTH: 24 INCHES LENGTH: 17 FEET DISCHARGE HEIGHT: 98 INCHES OVERALL HEIGHT: 100 INCHES ELECTRIC MOTOR AND GEAR REDUCER STAINLESS STEEL GUIDE RAILS MOUNTED ON SWIVEL CASTERS
|
🔒 Subscribe | |||
|
|
2018 | KICE | 3.00E+06 |
2018 KICE 3E6 MULTI-ASPIRATOR PARTICLE DENSITY SEPARATOR. COMPARED TO TRADITIONAL SCREENERS, AIR CLASSIFIERS MAY OFFER MORE EFFICIENT PRODUCT DENSITY SEPARATION. KICE'S MULTI-ASPIRATOR IS EXTREMELY ACCURATE AND COST-EFFECTIVE WHEN IT COMES TO SEPARATING LIGHT MATERIALS FROM HEAVY ONES. THE MULTI-ASPIRATOR HAS MANY APPLICATIONS IN COMMERCIAL FOOD PROCESSING AND OTHER INDUSTRIES THAT RELY ON DRY SEPARATION SYSTEMS. REDUCE DUST, EXPLOSIVE FINES AND INFESTATIONS. REMOVE FINES AND DUST FROM FINISHED PELLETS, CEREALS AND PRILLS. SEPARATE DIFFERENT TYPES OF PLASTICS IN REGRIND/RECLAIM SYSTEMS. DE-DUST FERTILIZER PRILLS. CLEAN GRAIN BY REMOVING DAMAGED KERNELS AND FOREIGN MATERIAL. SEPARATE HULLS OR SHELLS FROM SEEDS OR NUTS. ALL MATERIAL OF CONSTRUCTION AND HARDWARE: 304L SS MOTOR: 1 HORSEPOWER, 3450 RPM, 230/460/3/60 S/N: 338777-2-1
|
🔒 Subscribe |
|
|
2017 | ALL-FILL | VF-110E |
2017 ALL-FILL VF-110E SINGLE-LANE STAINLESS STEEL VIBRATORY FEEDER S/N: 65371. SPEED: UP TO 12 CONTAINERS PER MINUTE DEPENDING ON PRODUCT AND WEIGHT. WEIGH BUCKET CAPACITY: 7 LITERS. HOPPER CAPACITY: 3.5 CUBIC FEET. EMBEDDED COLOR TOUCH SCREEN HMI. FOOT PEDAL INITIATION. STORAGE: 50 PRODUCT MEMORY. SINGLE-LANE STAINLESS STEEL CONSTRUCTION. MOUNTED ON LOCKABLE CASTERS. ELECTRICAL: 120 VOLTS, 60 HZ, PHASE 1. PREVIOUSLY RAN PLAIN UNFLAVORED POPCORN.
|
🔒 Subscribe |
|
|
2016 | METTLER TOLEDO | SL1500 |
2016 METTLER TOLEDO SL1500 METAL DETECTOR WITH: APERTURE: HEIGHT: 10.5 INCHES WIDTH: 7 INCHES CONVEYOR: LENGTH: 46 INCHES WIDTH: 5 INCHES TOUCHSCREEN HMI STAINLESS STEEL CONSTRUCTION HEIGHT ADJUSTABLE LEGS ELECTRICAL: 85-132 VOLTS, SINGLE PHASE, 60 HZ S/N: 9523601
|
🔒 Subscribe |
|
|
REVENT | 619 G DG |
REVENT 619 G DG DOUBLE RACK OVEN WITH: CAPACITY: DOUBLE RACK BTU: 318,000 FUEL: NATURAL GAS TIMERS DIGITAL TEMPERATURE READ OUTS DOUBLE PANE VIEWING WINDOW STAINLESS STEEL CONSTRUCTION ELECTRICAL: 208 VOLTS, 60 HZ, 3 PHASE, 15 AMPS MODEL: 619 G DG S/N: U97-1931-530-3197
|
🔒 Subscribe | |
|
|
40 INCH LIQUID MIXER FOR KETTLE - USED LIQUID MIXER FOR KETTLE WITH: 40 INCHES SHAFT: THREE BLADE PROP: BLADE LENGTH: 3 INCH VARIABLE SPEED OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 38 INCHES HEIGHT: 68 INCHES ELECTRICS: 240 VOLTS 60 HERTZ 3 PHASE MOUNTED ON CASTORS
|
🔒 Subscribe | |||
|
|
MATRIX |
MATRIX VERTICAL FORM FILL AND SEAL BAGGER - USED MATRIX BAGGER WITH: PRODUCTION SPEED: 40 BAGS PER MINUTE, DEPENDING ON APPLICATION FORMING HORN DIAMETERS: 5.5 INCHES 4.25 INCHES 3 INCHES SEAL JAW WIDTH: 13 INCHES PRINT REGISTERED CURRENT FILM DIMENSIONS: WEB WIDTH: 12.5 INCHES CORE DIAMETER: 3 INCHES FILM GRIP SIDE BELT DIMENSIONS: LENGTH: 13 INCHES WIDTH: 1 INCH FILM TRACKING ADJUSTMENT CAPABLE OF GUSSET BAGS WITH CHANGE PARTS STAINLESS STEEL CONTACT PARTS TOUCH SCREEN HMI MOUNTED ON A MILD STEEL FRAME ELECTRICAL: 250 VOLTS, 60 HERTZ, 3 PHASE PREVIOUS BAG DIMENSIONS: LENGTH: 12 INCHES WIDTH: 5.5 INCHES
|
🔒 Subscribe | ||
|
|
AVERY DENNISON | TDI SHORT TAG THERMAL PRINTER |
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM PRINT WIDTH: 128 MILLIMETERS TAG DIMENSIONS: MAXIMUM: LENGTH: 330 MILLIMETERS WIDTH: 154 MILLIMETERS MINIMUM: LENGTH: 50 MILLIMETERS WIDTH: 30 MILLIMETERS FOIL ROLL DIAMETER: OUTER DIAMETER: 90 MILLIMETERS INNER CORE: 1 INCH MAXIMUM FOIL LENGTH: 600 METERS MAXIMUM STACKING HEIGHT: 150 MILLIMETERS PUSH BUTTON CONTROLS STAINLESS STEEL EXTERIOR ELECTRICAL REQUIREMENTS: 115/230-240 VOLTS, 50/60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
CDA | 40 INCH ROTARY ACCUMULATION TABLE |
CDA 40 INCH ROTARY ACCUMULATION TABLE - USED CDA ROTARY ACCUMULATION TABLE WITH: TABLE DIAMETER: APPROXIMATELY 36 INCHES STAINLESS STEEL CONSTRUCTION EMERGENCY STOP THREADED ADJUSTABLE HEIGHT LEGS
|
🔒 Subscribe | |
|
|
LANTECH | SW-3000 |
LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PRODUCT DIMENSIONS: LENGTH: 40 INCHES WIDTH: 15 INCHES HEIGHT: 8 INCHES MINIMUM PRODUCT DIMENSIONS: LENGTH: 3 INCHES WIDTH: 1.5 INCHES HEIGHT: 1/8 INCH FILM ROLL SIZE: MINIMUM: 6 INCHES MAXIMUM: 24 INCHES CONVEYOR DIMENSIONS: WIDTH: 15 INCHES HEIGHT: 36 INCHES SEAL BAR WIDTH: 18 INCHES PRODUCT DETECTION SEALING MECHANISM: HOT KNIFE CONTINUOUS MOTION AIR REQUIREMENTS: 8-12 CUBIC FEET PER MINUTE AT 85 PSI ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 153 INCHES WIDTH: 40 INCHES HEIGHT: 66 INCHES
|
🔒 Subscribe | |
|
|
TAYLOR MANUFACTURING | 96X60 |
TAYLOR MANUFACTURING 96X60 MASS FLOW ACCUMULATION TABLE - USED ACCUMULATION TABLE WITH: STEEL MESH CONVEYOR INFEED HEIGHT: 43 INCHES CONVEYOR DIMENSIONS: 96 INCHES WIDE X 60 INCHES LONG MOTOR: HORSEPOWER: 37 RPM: 1750 ELECTRICAL: VOLTS: 600 FREQUENCY: 60 HZ PHASE 3
|
🔒 Subscribe | |
|
|
3M-MATIC |
3M-MATIC TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 20 CASES PER MINUTE MINIMUM CASE DIMENSIONS: LENGTH: 5.87 INCHES WIDTH: 4.5 INCHES HEIGHT: 4.75 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: UNLIMITED WIDTH: 19.69 INCHES HEIGHT: 19.69 INCHES 2 INCH TAPE HEAD ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 3 FEET HEIGHT: 5 FEET
|
🔒 Subscribe | ||
|
|
LANTECH | Q300 |
LANTECH Q300 LOW PROFILE TURNTABLE STRETCH WRAPPER - USED LANTECH STRETCH WRAPPER WITH: PRODUCTION SPEED: UP TO 25-35 LOADS PER HOUR DEPENDING ON APPLICATION MAXIMUM LOAD WEIGHT: 4000 POUNDS MAX PRODUCT HEIGHT: 110 INCHES LOAD SIZE DIAGONAL MAXIMUM: 72 INCHES PLATE DIAMETER: 60 INCHES FILM ROLL DIMENSIONS: WEB WIDTH: 20 INCHES DIAMETER: 10 INCHES CORE DIAMETER: 3 INCHES MAST HEIGHT: 120 INCHES (APPROXIMATELY) BALDOR MOTOR: HORSEPOWER: .55 RPM: 1750 ELECTRICAL: 115 VOLTS, 60 HERTZ, 20 AMPS, 1 PHASE
|
🔒 Subscribe | |
|
|
2016 | MASSMAN | HFFS-IM1000 |
2016 MASSMAN HFFS-IM1000 FLEXIBLE POUCH PACKAGING SYSTEM MASSMAN HORIZONTAL FILL & SEAL FLEXIBLE POUCH PACKAGER. 60-70 PACKAGES PER MINUTE PREMADE OR ROLLSTOCK PRINTED FILM CURRENTLY CONFIGURED FOR 1 OZ, 2.5 OZ AND 3 OZ BAGS OF PRODUCT CAPABLE OF MAKING GUSSET BOTTOM POUCHES. DUAL LEVEL PLATFORM MADE BY STONE ENT. OF OMAHA, NE 2 LEVEL SO THAT THE VIBRATING HOPPER IS ON A SEPARATE LEVEL AND PLATFORM FROM THE SCALE TO ISOLATE THE MOVEMENT OF WORKER AND VIBRATING HOPPER. LARGE MAIN LEVEL TO ALLOW FOR CLEANING OF THE SCALE EQUIPMENT ON THE PLATFORM VERSUS REMOVING TO GROUND LEVEL. VC999 HIGH SPEED MULTIHEAD WEIGHER. WASH DOWN TYPE IP66 MODEL BMT-114X1.3 HS GRAVITY FEED METAL DETECTOR INLINE BETWEEN MULTIHEAD WEIGHER AND BAGGER. ENSIGHT SOLUTIONS COLUMN LIFT USED AS AN ELEVATOR SYSTEM TO GET CARTS OF PRODUCT TO TOP LEVEL OF PLATFORM. THIS COULD BE EXCLUDED AND A CONVEYOR SYSTEM OR OTHER MEANS COULD BE USED TO FEED PRODUCT TO THE WEIGHER. LAST RUNNING: BEEF JERKY THE BELOW BAGS ARE WHAT IT IS SET UP FOR. THE ONLY MAJOR TOOLING CHANGEOVER IS SIMPLY CHANGING THE SPACING OF THE BAG GRABBING FINGERS WITH A METAL SPACER DEVICE, THEREFORE, CHANGING TO OTHER SIZES SHOULD NOT BE A PROBLEM. 2.5 OZ JERKY BAG WITH ZIPPER 6 WIDE X 8 TALL. 3.0 OZ BOTTOM GUSSET BAG. 130 MM WIDE BY 205 MM LONG. THE LENGTH IS EASILY ADJUSTABLE. 1.0 OZ SAME WIDTH AS 3.0 OZ.
|
🔒 Subscribe |
|
|
AUTOBAG | SPRINT 60 SIDEPOUCH BAGGER |
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
2022 | METTLER-TOLEDO | TABLEX II V3 |
2022 METTLER-TOLEDO TABLEX II V3 STAINLESS STEEL GRAVITY FED METAL DETECTOR WITH: MAXIMUM SENSITIVITY TO FE, NON-FE, AND SS METALS PRODUCT FORMAT: CAPSULES TABLETS COMPLIANCE: HIGH LEVEL (21 CFR) BASE LEVEL 5.7 INCH QVGA TOUCHSCREEN HMI ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE AMPS: 4 LAST PRODUCT RAN: THC INFUSED TABLETS LAST RUN: AUGUST 2023
|
🔒 Subscribe |
|
|
SCHNEIDER PACKAGING EQUIPMENT CO. | 57SS10BAB |
SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB WITH A GORING KERR METAL DETECTOR - USED SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB WITH: GORING KERR METAL DETECTOR TUNNEL MAT TOP CONVEYOR: LENGTH: 57.75 INCHES WIDTH: 9.75 INCHES GRASEBY VOLKMANN HMI ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE AMPS: 6
|
🔒 Subscribe | |
|
|
KLOCKNER BARTELT | RPM 950 |
KLOCKNER BARTELT RPM 950 HORIZONTAL ROTARY FORM, FILL & SEAL - KLOCKNER BARTELT HORIZONTAL FORM, FILL & SEAL POUCH MACHINE: ROTARY TURRET HORIZONTAL FORM, FILL & SEAL POUCH MACHINE 8 STATIONS 7.25 INCH GRIPPER ARM 10.5 INCH SEAL BAR SPEED: UP TO 75 PPM MAXIMUM ROLL DIAMETER: UP TO 24 INCHES POUCH SIZE RANGE: WIDTH: 4.5 INCHES TO 9.5 INCHES HEIGHT: 4.5 TO 14 INCHES DISCHARGE CONVEYOR ZIPPER ATTACHMENT HOLEPUNCH ATTACHMENT OVERFILL DISCHARGE ELECTRONICS: 480 VOLTS 60 HERTZ 3 PHASE LAST RUNNING 6 OZ BAGS OF TOBACCO 8 INCHES WIDE
|
🔒 Subscribe | |
|
|
WEXXAR BEL | 252 |
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON CASE SIZE NO TAPE HEADS INCLUDED CASE SIZE RANGE: MINIMUM: LENGTH: 8 INCHES WIDTH: 6 INCHES HEIGHT: 5 INCHES MAXIMUM: LENGTH: 22 INCHES WIDTH: 15.5 INCHES HEIGHT: 15.75 INCHES ADJUSTABLE INFEED/OUTFEED HEIGHT: MINIMUM: 25 INCHES MAXIMUM: 32 INCHES ELECTRICAL: 120 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
TALON MFG. | SUPRA |
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER - USED TALON BAG MAKER WITH: SPEED: UP TO 300 BAGS PER MINUTE DEPENDING ON MATERIALS AND APPLICATION 8 STATION SEALING MECHANISM FILM ROLL WIDTH: 27 INCHES DISCHARGE CONVEYOR LENGTH: 54 INCHES ADJUSTABLE HEIGHT DISCHARGE, SET AT 34 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
9' BY 20" ACCORDION STYLE SKATE CONVEYOR - USED SKATE CONVEYOR WITH: CONVEYOR EXTENDED DIMENSIONS: LENGTH: 9 FEET WIDTH: 20 INCHES CONVEYOR CLOSED DIMENSIONS: LENGTH: 3 FEET WIDTH: 20 INCHES INFEED HEIGHT: 30 INCHES LENGTH BETWEEN SKATES: 3 INCHES MOUNTED ON CASTERS
|
🔒 Subscribe | |||
|
|
72" BY 12" PLASTIC MAT TOP CONVEYOR - USED CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 72 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 38 INCHES MOUNTED ON CASTERS ELECTRICAL REQUIREMENTS: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
144"L X 60"W MEZZANINE - USED MEZZANINE AND STAIRS WITH: OVERALL DIMENSIONS: LENGTH:144 INCHES WIDTH: 60 INCHES HEIGHT WITHOUT GUARD RAIL: 76.5 INCHES HEIGHT WITH GUARD RAIL: 118.5 INCHES STAIRCASE WITH RAILS
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL CONSTRUCTION. ON CASTERS. TABLE 1 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH: 24 INCHES HEIGHT: 39 INCHES. TABLE 2 OVERALL DIMENSIONS: LENGTH: 42 INCHES WIDTH: 20 INCHES HEIGHT: 36.5 INCHES. TABLE 3 OVERALL DIMENSIONS: LENGTH: 43 INCHES WIDTH: 20 INCHES HEIGHT: 34.5 INCHES.
|
🔒 Subscribe | |||
|
|
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 117 INCHES WIDTH: 11.5 INCHES INFEED HEIGHT: 11.5 INCHES DISCHARGE HEIGHT: 59.5 INCHES MOUNTED ON (4) CASTERS STAINLESS STEEL CONSTRUCTION MOTOR SPECIFICATIONS: HORSEPOWER: 0.5 RPM: 1725 ELECTRICAL: 230/460 VOLTS, 60 HZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
PACK-ALL |
PACK-ALL HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 16 INCHES HEIGHT: 9.5 INCHES TUNNEL LENGTH: 24 INCHES CONVEYOR DIMENSIONS: LENGTH: 36 INCHES WIDTH: 14 INCHES ADJUSTABLE SPEED ELECTRICAL REQUIREMENTS: 208 VOLTS, 60 HERTZ OVERALL DIMENSIONS: LENGTH: 38 INCHES WIDTH: 32 INCHES HEIGHT: 26 INCHES
|
🔒 Subscribe | ||
|
|
PILLAR | MK-20 |
PILLAR MK-20 20KW INDUCTION HEATER WITH: POWER RANGE: 2.5 KW - 20 KW FREQUENCY: 50 KHZ - 450 KHZ MOFSET TRANSISTOR MODULES 95% CONVERSION EFFICIENCY SINGLE MAIN CONTROL BOARD 95 DEGREE MAX INLET WATER TEMPERATURE 30 PSI MINIMUM DIFFERENTIAL WATER PRESSURE ELECTRICAL: 208 VOLTS, 3 PHASE, 50/60 HERTZ
|
🔒 Subscribe | |
|
|
USED ACCORDION CONVEYOR WITH: CONVEYOR WIDTH: 18 INCHES OVERALL CLOSED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 24 INCHES HEIGHT: 32 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
ACCUTEK | DOMINO A100 |
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL AUTOMATIC INK BLEED CONTROL 825 MILLIMETER CARTRIDGE WITH AUTOMATIC METER CHARACTER WIDTH AND HEIGHT ADJUSTMENT AUTO REPEAT/INVERSE/REVERSE ELECTRICAL: 110 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
GORING KERR | TEKTAMET 211 |
GORING KERR TEKTAMET 211 METAL DETECTOR - USED GORING KERR METAL DETECTOR WITH: WORKING APERTURE: WIDTH: 4.5 INCHES HEIGHT: 9.75 INCHES CONVEYOR DIMENSIONS: LENGTH: 48 INCHES WIDTH: 4.5 INCHES HEIGHT: 36 INCHES GUIDE RAIL HEIGHT: 2 INCHES CONVEYOR TYPE: PLASTIC TABLE TOP MOUNTED ON 4 STAINLESS STEEL LEGS
|
🔒 Subscribe | |
|
|
BARTELT |
BARTELT HORIZONTAL FORM FILL AND SEAL WITH: PRODUCTION OUTPUT RATE: UP TO 70 POUCHES PER MINUTE PACKAGE WIDTH: 6 INCHES 14 STATIONS FILM ROLL LENGTH: 12 INCHES FILM ROLL DIAMETER: 1 INCH SEAL JAW LENGTH: 9 INCHES STAINLESS STEEL COMPONENTS MILD STEEL FRAME ELECTRICAL REQUIREMENTS: 230/480 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 221 INCHES WIDTH: 54 INCHES HEIGHT: 91 INCHES
|
🔒 Subscribe | ||
|
|
2016 | PEARSON | CE60-TL |
2016 PEARSON CE60-TL CASE ERECTOR AND BOTTOM GLUE SEALER - USED CASE ERECTOR AND BOTTOM GLUE SEALER WITH: OUTPUT RATE: UP TO 55 CASES PER MINUTE ERECTED CASE SIZE RANGE: LENGTH: 12 INCHES TO 23 INCHES WIDTH: 5.5 INCHES TO 16 INCHES OPEN DEPTH: 5.5 INCHES TO 22.5 INCHES KNOCKED-DOWN SIZES: LENGTH: 17.5 INCHES TO 36 INCHES WIDTH: 8.25 INCHES TO 30.5 INCHES BOTTOM FLAP WIDTH: 3 INCHES TO 8 INCHES CHAIN DRIVEN BELT INFEED WIDTH: 4.5 INCHES HOT MELT GLUE UNIT ALLEN-BRADLEY PLC ELECTRICAL: 460 VOLTS, 3 PH, 60 HZ RIGHT HAND CASE MACHINE
|
🔒 Subscribe |
EXCEL SFE-800 NF
PACKAGING EQUIPMENT
EXCEL SFE-800 NF FULLY AUTOMATIC IN-LINE POLY BUNDLER WITH: SPEED: UP TO 25 BUNDLES PER MINUTE (DEPE...
Hammer Price:
🔒
LANTECH Q-AUTO 1000
PACKAGING EQUIPMENT
LANTECH Q-AUTO 1000 TURNTABLE STRETCH WRAPPER WITH: OUTPUT: UP TO 45 LOADS PER HOUR, DEPENDING ON LO...
Hammer Price:
🔒
MASTERLY
FOOD PROCESSING AND RESTAURANT EQUIPMENT
MASTERLY STAINLESS STEEL RIBBON BLENDER WITH: SINGLE SHAFT RIBBON WORKING CAPACITY: 500 POUNDS (DEPE...
Hammer Price:
🔒
2018 ADVANTAGE BCD-10A
REFRIGERATION EQUIPMENT
2018 ADVANTAGE BCD-10A AIR COOLED GLYCOL CHILLER - USED ADVANTAGE GLYCOL CHILLER WITH: COOLING CAPAC...
Hammer Price:
🔒
TECH FOR FOOD ROLL IT
FOOD PROCESSING AND RESTAURANT EQUIPMENT
TECH FOR FOOD ROLL IT FOOD ROLLER WITH: THE ROLLING AND WRAPPING MACHINE CAN BE OPERATED IN THE BASI...
Hammer Price:
🔒
PEERLESS PBD 6
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PEERLESS PBD 6 BREAD AND DOUGH DIVIDER WITH: STAINLESS STEEL HOPPER: 28 INCHES LONG X 26 INCHES DEPT...
Hammer Price:
🔒
WEIGHPACK COMBI SCALE 14 HEAD
PACKAGING EQUIPMENT
WEIGHPACK COMBI SCALE 14 HEAD 2.5L COMBINATION WEIGHER - USED WEIGHPACK HEAD SCALE WITH: NUMBER OF H...
Hammer Price:
🔒
A-ONE CDL-600-90-S
MISC
A-ONE CDL-600-90-S STAINLESS STEEL SINGLE COLUMN TOTE DUMPER WITH: LIFTING CAPACITY: 600 POUNDS TOTE...
Hammer Price:
🔒
METTLER TOLEDO SAFELINE
MISC
METTLER TOLEDO SAFELINE STAINLESS STEEL METAL DETECTOR - USED SAFELINE METAL DETECTOR WITH: APERTURE...
Hammer Price:
🔒
FELDMEIER
TANKS, PUMPS & STORAGE EQUIPMENT
FELDMEIER STAINLESS STEEL TANK - USED FELDMEIER STAINLESS STEEL TANK WITH: CAPACITY: APPROXIMATELY 2...
Hammer Price:
🔒
MOLINE
PACKAGING EQUIPMENT
MOLINE SHEETER WITH: BELT DIMENSIONS: LENGTH: APPROXIMATELY 24 FEET WIDTH: 24 INCHES HEIGHT: 36 INCH...
Hammer Price:
🔒
MISC
STAINLESS STEEL Z CONFIGURATION BUCKET CONVEYOR - USED BUCKET CONVEYOR WITH: BUCKET DIMENTSIONS: LEN...
Hammer Price:
🔒
MISC
8'L X 24"W LINEAR VIBRATORY FEEDER - USED LINEAR VIBRATORY FEEDER WITH: CONVEYOR DIMENSIONS: LENGTH:...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 20 INCHES R...
Hammer Price:
🔒
2020 PLAN IT PACKAGING INC. CONVEYOR
PACKAGING EQUIPMENT
2020 PLAN IT PACKAGING INC. CONVEYOR CLEATED BLUE BELT INCLINE CONVEYOR - USED PLAN IT PACKAGING CLE...
Hammer Price:
🔒
VWR SCIENTIFIC 1450M
MISC
VWR SCIENTIFIC 1450M STAINLESS STEEL VACUUM OVEN - USED VWR SCIENTIFIC VACUUM OVEN WITH: CAPACITY: 4...
Hammer Price:
🔒
2017 ESCHERICH ESUC 112
DUST COLLECTION EQUIPMENT
2017 ESCHERICH ESUC 112 PHARMACEUTICAL DUST COLLECTOR WITH: AIR INTAKE DIAMETER: 150 MM EXHAUST AIR ...
Hammer Price:
🔒
THERMO SCIENTIFIC VO1824A
MISC
THERMO SCIENTIFIC VO1824A LINDBERG/BLUE VACUUM OVEN - USED THERMO SCIENTIFIC VACUUM OVEN WITH: CAPAC...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
PLASTIC MAT TOP 98" DISCHARGE INCLINE CONVEYOR - USED CONVEYOR WITH: INFEED HEIGHT: 39 INCHES PLASTI...
Hammer Price:
🔒
2018 KICE 3.00E+06
CHEMICAL PROCESSING EQUIPMENT
2018 KICE 3E6 MULTI-ASPIRATOR PARTICLE DENSITY SEPARATOR. COMPARED TO TRADITIONAL SCREENERS, AIR CLA...
Hammer Price:
🔒
2017 ALL-FILL VF-110E
PACKAGING EQUIPMENT
2017 ALL-FILL VF-110E SINGLE-LANE STAINLESS STEEL VIBRATORY FEEDER S/N: 65371. SPEED: UP TO 12 CONTA...
Hammer Price:
🔒
2016 METTLER TOLEDO SL1500
PACKAGING EQUIPMENT
2016 METTLER TOLEDO SL1500 METAL DETECTOR WITH: APERTURE: HEIGHT: 10.5 INCHES WIDTH: 7 INCHES CONVEY...
Hammer Price:
🔒
REVENT 619 G DG
FOOD PROCESSING AND RESTAURANT EQUIPMENT
REVENT 619 G DG DOUBLE RACK OVEN WITH: CAPACITY: DOUBLE RACK BTU: 318,000 FUEL: NATURAL GAS TIMERS D...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
40 INCH LIQUID MIXER FOR KETTLE - USED LIQUID MIXER FOR KETTLE WITH: 40 INCHES SHAFT: THREE BLADE PR...
Hammer Price:
🔒
MATRIX
PACKAGING EQUIPMENT
MATRIX VERTICAL FORM FILL AND SEAL BAGGER - USED MATRIX BAGGER WITH: PRODUCTION SPEED: 40 BAGS PER M...
Hammer Price:
🔒
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER
COMMERCIAL PRINTING & BINDERY EQUIPMENT
AVERY DENNISON TDI SHORT TAG THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM P...
Hammer Price:
🔒
CDA 40 INCH ROTARY ACCUMULATION TABLE
MISC
CDA 40 INCH ROTARY ACCUMULATION TABLE - USED CDA ROTARY ACCUMULATION TABLE WITH: TABLE DIAMETER: APP...
Hammer Price:
🔒
LANTECH SW-3000
PACKAGING EQUIPMENT
LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PROD...
Hammer Price:
🔒
TAYLOR MANUFACTURING 96X60
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
TAYLOR MANUFACTURING 96X60 MASS FLOW ACCUMULATION TABLE - USED ACCUMULATION TABLE WITH: STEEL MESH C...
Hammer Price:
🔒
3M-MATIC
PACKAGING EQUIPMENT
3M-MATIC TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 20 CASES PER MINUTE MINIMUM CASE DIMEN...
Hammer Price:
🔒
LANTECH Q300
PACKAGING EQUIPMENT
LANTECH Q300 LOW PROFILE TURNTABLE STRETCH WRAPPER - USED LANTECH STRETCH WRAPPER WITH: PRODUCTION S...
Hammer Price:
🔒
2016 MASSMAN HFFS-IM1000
PACKAGING EQUIPMENT
2016 MASSMAN HFFS-IM1000 FLEXIBLE POUCH PACKAGING SYSTEM MASSMAN HORIZONTAL FILL & SEAL FLEXIBLE POU...
Hammer Price:
🔒
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER
PACKAGING EQUIPMENT
AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUC...
Hammer Price:
🔒
2022 METTLER-TOLEDO TABLEX II V3
CHEMICAL PROCESSING EQUIPMENT
2022 METTLER-TOLEDO TABLEX II V3 STAINLESS STEEL GRAVITY FED METAL DETECTOR WITH: MAXIMUM SENSITIVIT...
Hammer Price:
🔒
SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB
PACKAGING EQUIPMENT
SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB WITH A GORING KERR METAL DETECTOR - USED SCHNEIDER PACKA...
Hammer Price:
🔒
KLOCKNER BARTELT RPM 950
PACKAGING EQUIPMENT
KLOCKNER BARTELT RPM 950 HORIZONTAL ROTARY FORM, FILL & SEAL - KLOCKNER BARTELT HORIZONTAL FORM, FIL...
Hammer Price:
🔒
WEXXAR BEL 252
PACKAGING EQUIPMENT
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON...
Hammer Price:
🔒
TALON MFG. SUPRA
PACKAGING EQUIPMENT
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER - USED TALON BAG MAKER WITH: SPEED: UP TO 300 BAGS PER ...
Hammer Price:
🔒
MISC
9' BY 20" ACCORDION STYLE SKATE CONVEYOR - USED SKATE CONVEYOR WITH: CONVEYOR EXTENDED DIMENSIONS: L...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
72" BY 12" PLASTIC MAT TOP CONVEYOR - USED CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 72 INCHES WID...
Hammer Price:
🔒
MISC
144"L X 60"W MEZZANINE - USED MEZZANINE AND STAIRS WITH: OVERALL DIMENSIONS: LENGTH:144 INCHES WIDTH...
Hammer Price:
🔒
MISC
STAINLESS STEEL CONSTRUCTION. ON CASTERS. TABLE 1 OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH: 24 IN...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 11...
Hammer Price:
🔒
PACK-ALL
PACKAGING EQUIPMENT
PACK-ALL HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 16 INCHES HEIGHT: 9.5 INCHES TUNNEL L...
Hammer Price:
🔒
PILLAR MK-20
MISC
PILLAR MK-20 20KW INDUCTION HEATER WITH: POWER RANGE: 2.5 KW - 20 KW FREQUENCY: 50 KHZ - 450 KHZ MOF...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
USED ACCORDION CONVEYOR WITH: CONVEYOR WIDTH: 18 INCHES OVERALL CLOSED DIMENSIONS: LENGTH: 30 INCHES...
Hammer Price:
🔒
ACCUTEK DOMINO A100
COMMERCIAL PRINTING & BINDERY EQUIPMENT
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL ...
Hammer Price:
🔒
GORING KERR TEKTAMET 211
MISC
GORING KERR TEKTAMET 211 METAL DETECTOR - USED GORING KERR METAL DETECTOR WITH: WORKING APERTURE: WI...
Hammer Price:
🔒
BARTELT
PACKAGING EQUIPMENT
BARTELT HORIZONTAL FORM FILL AND SEAL WITH: PRODUCTION OUTPUT RATE: UP TO 70 POUCHES PER MINUTE PACK...
Hammer Price:
🔒
2016 PEARSON CE60-TL
PACKAGING EQUIPMENT
2016 PEARSON CE60-TL CASE ERECTOR AND BOTTOM GLUE SEALER - USED CASE ERECTOR AND BOTTOM GLUE SEALER ...
Hammer Price:
🔒