Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More

NCM Auctions

Category: TRUCKS, TRAILERS & VEHICLES

Total Lots: 393

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 351–393 of 393 lots

Year	Make	Model	Lot Description	Hammer Price
	AMETEK LAND	THERMAL IMAGER BORESCOPE CAMERA	AMETEK LAND THERMAL IMAGER BORESCOPE CAMERA. THIS BORESCOPE CAMERA WILL NEED TO BE RECALIBRATED. AMETEK LAND · THERMAL IMAGER BORESCOPE CAMERA	🔒 Subscribe
2020	HANGCHA		2020 HANGCHA FORKLIFT TRUCK 1800KG CAPACITY. 4700MM LIFT HEIGHT, CONTAINER SPEC. TRIPLEX. 4370 HOURS INTEGRAL SIDE-SHIFT AND LOAD GUARD SOLID TYRES 2020 · HANGCHA	🔒 Subscribe
	HIROX	HDX-30	HIROX HDX-30 HYDRAULIC BREAKER TO SUIT 10-20 TON MACHINE HIROX · HDX-30	🔒 Subscribe
2015	LINDE	H25	2015 LINDE H25 DIESEL FORKLIFT TRUCK (TRIPLE MAST - 8800 HOURS) CONTAINER SPEC 2.5 TONNE LIFT GOOD TYRES ALL ROUND VERY WELL MAINTAINED LOW HOURS - 8800 5.5 MAST WITH SIDE SHIFT GOOD CONDITION ALL ROUND 2015 · LINDE · H25	🔒 Subscribe
			V TWIN HEAD LED WITH POWER TAKE OFF. APPROXIMATE DIMENSIONS: HEIGHT - 157CM WIDTH - 100CM DEPTH - 100CM	🔒 Subscribe
2014	CATERPILLAR		2014 CATERPILLAR 2 TONNE ELECTRIC FORKLIFT WITH ONLY 386 HOURS! 5 METRE LIFT, SIDE SHIFT, FULL WEATHER PROTECTION. S/N: 2014 · CATERPILLAR	🔒 Subscribe
			CABLE ROLLERS - COR. APPROXIMATE DIMENSIONS: HEIGHT - 36CM WIDTH - 26CM DEPTH - 22CM	🔒 Subscribe
		ELITE	14 METER HSC ELITE FESTOON LIGHT - THX22256 POWER - 110V APPROXIMATE DIMENSIONS: LENGTH - 14 METERS ELITE	🔒 Subscribe
	HSC	ELITE	HSC ELITE WORK LIGHT VOLTAGE - 110V APPROXIMATE DIMENSIONS: HEIGHT - 28CM WIDTH - 24CM DEPTH - 7CM HSC · ELITE	🔒 Subscribe
			FESTOON LIGHT - 110V - APPROXIMATE LENGTH - 14M	🔒 Subscribe
2020	HELI		2020 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 6,088 HOURS. FEATURES A 3.7M MAST, GOOD TYRES, AND IS WELL MAINTAINED. GOOD CONDITION. 2020 · HELI	🔒 Subscribe
2015	HELI		2015 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 5,201 HOURS. FEATURES 2.5 TONNE LIFT CAPACITY, LOW HOURS, GOOD TYRES, 3.7M MAST, AND IS WELL MAINTAINED. GOOD CONDITION ALL ROUND. 2015 · HELI	🔒 Subscribe
2003	DAEWOO		2003 DAEWOO 1.5 GAS FORKLIFT TRUCK 1.5 TONNE LIFT 7,166 HOURS 3.5M MAST WITH SIDE SHIFT GOOD CONDITION ALL ROUND GOOD TYRES 2003 · DAEWOO	🔒 Subscribe
2018	HELI	3 TONNE	2018 HELI 3 TONNE ELECTRIC FORKLIFT TRUCK WITH SIDE SHIFT. 4M MAST. LOW 1700 HOURS. GOOD BATTERY COMPLETE WITH CHARGER. OUTSTANDING CONDITION. 2018 · HELI · 3 TONNE	🔒 Subscribe
	YILMAZ	AIM 4410	20000 RPM 250 LT/MIN 14 KW 6 BAR 400V AC 3P PE WEIGHT - 3200KG W - 670CM / H - 220 / L - 325CM YILMAZ · AIM 4410	🔒 Subscribe
2005	BUSELLATO	JET CONCEPT	2005 BUSELLATO JET CONCEPT POD & RAIL CNC MANUFACTURER - BUSELLATO MODEL - JET CONCEPT RUNNING AS IT SHOULD YEAR - 2005 SERIAL - 6226 KW - 16 A - 26 VOLTS - 400 HZ - 50/60 KA - 40 2005 · BUSELLATO · JET CONCEPT	🔒 Subscribe
	QUILIGOTTI	TDE9	10 X PALLETS OF BRAND NEW QUILIGOTTI TERRAZZO COMMERCIAL TILES - TDE9. TOTAL COVERAGE PER PALLET IS 24 SQUARE YARDS / 20 SQUARE METRES. PALLET DIMENSIONS - 1M X 1M X 1M. TILE SIZE - 300MM X 300MM X30MM. TILE CODE - TDE9. PALLET WEIGHT 1200KG. THIS PRODUCT IS BRAND NEW AND MANUFACTURED BY QUILIGOTTI IN THE UK. ALL PALLETS ARE HEAT SEALED FOR SAFE TRANSPORTATION. QUILIGOTTI · TDE9	🔒 Subscribe
			7.2M FOOD SAFE BLUE CONVEYOR BELT SAFETY LINE CUT OFF SYSTEM	🔒 Subscribe
	WADKIN	CUT PRO 14	WADKIN CUT PRO 14 CHOP SAW 400 VOLT. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. 2 IDENTICAL CHOP SAWS AVAILABLE. USED FOR SET MANUFACTURING IN THE FILM AND TV INDUSTRY. WADKIN · CUT PRO 14	🔒 Subscribe
	CONFAB	6M 33 CONE	6M 33 CONE POULTRY DE BONING LINE SAFETY CAGES VARIABLE SPEED SAFETY LINE CUT OFF SYSTEM CONFAB · 6M 33 CONE	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING. SENCO · SN90CXP	🔒 Subscribe
2006	HAYTER	MT313	2006 HAYTER MT313 TRIPLE MOWER ROLL BAR 20HP 3 CYLINDER KUBOTA DIESEL ENGINE ROAD REGISTERED ROPS HST 3WD PAS INDEPENDENT FLOATING HEADS THIS 3WD ORNAMENTAL FINISHING MOWER HAS 7 KNIFE FLOATING HEAD UNITS AND A 2.1M CUTTING WIDTH. OPTIONAL CUT AND COLLECT WITH GRASS BOXES. THE REAR MOUNTED ENGINE MOVES NOISE AWAY FROM THE OPERATOR AND ALSO INCREASES VISIBILITY OF THE CUTTING UNITS. THE UNITS FULLY FOLD UP, REDUCING THE MACHINE WIDTH FOR TRANSPORT AND STORAGE. SUITABLE FOR CRICKET OUTFIELDS, TENNIS COURTS, TEE BOXES, ORNAMENTAL LAWNS AND SMALL PLAYING FIELDS WHERE A HIGHER QUALITY CUT IS IMPORTANT. 2006 · HAYTER · MT313	🔒 Subscribe
1999	NISSAN		1999 NISSAN 2.5 TONNE DIESEL FORKLIFT, 4.2M TRIPLE MAST, CONTAINER SPEC, NISSAN 4 CYLINDER ENGINE, 7673 HOURS, WITH SIDE SHIFT 1999 · NISSAN	🔒 Subscribe
2013	TOYOTA	5.5T GAS FORKTRUCK	2013 TOYOTA 5.5T GAS FORKTRUCK 4.3M TRIPLE MAST APPROX 2000 HOURS 2013 · TOYOTA · 5.5T GAS FORKTRUCK	🔒 Subscribe
2013	HAULOTTE	COMPACT 12	2013 HAULOTTE COMPACT 12 BATTERY SCISSOR LIFT 12 METRES WORKING HEIGHT 2013 · HAULOTTE · COMPACT 12	🔒 Subscribe
2018	MECALAC	TA3 S	2018 MECALAC TA3 S DUMPER 1559 HOURS 3 TONNE DUMPER SITE BEACONS CE MARKED 2018 · MECALAC · TA3 S	🔒 Subscribe
2017		POWER TOWER ECO	2017 POWER TOWER ECO 4.2M WORKING HEIGHT 2017 · POWER TOWER ECO	🔒 Subscribe
			PRE FAB TEMPORARY SHOP METAL GIRDER SUPPORTS AND BEAMS WITH A WOODEN FLOOR AND TARP WALLS T SHAPE BUILDING TARP HAS SOME RIPS IN APPROXIMATE VERTICAL METAL BEAM HEIGHT - 400CM APPROXIMATE DIAGONAL METAL BEAM LENGTH - 420CM APPROXIMATE DIMENSIONS: HEIGHT - 4M WIDTH - 32M DEPTH - 20M	🔒 Subscribe
2018	DAF	CF 450 FTG SPACE CAB	2018 DAF CF 450 FTG SPACE CAB TRACTOR UNIT, EURO 6, 544K KM'S, COLOUR WHITE, FUEL TYPE DIESEL, AUTO GEARBOX, AIR KIT, LIFT & STEER SECOND AXLE, SERVICED 2018 · DAF · CF 450 FTG SPACE CAB	🔒 Subscribe
	LINDE	12 TONNE	12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER LINDE · 12 TONNE	🔒 Subscribe
2000	LINDE	H45D	2000 LINDE H45D 4.5 TONNE FORKLIFT WITH PERKINS ENGINE. VERY WELL MAINTAINED. 2000 · LINDE · H45D	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. TYPE: PNEUMATIC CLIPPED HEAD FRAMING NAILER. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING. SENCO · SN90CXP	🔒 Subscribe
	SENCO		3 X SENCO PNEUMATIC STAPLE GUNS WITH CARRY CASES, MANUALS, ACCESSORIES & 6M RETRACTABLE HOSE REELS. MANUFACTURER: SENCO. TYPE: PNEUMATIC STAPLE GUNS. OPERATING PRESSURE: TYPICALLY UP TO 120 PSI / 8.3 BAR (MODEL DEPENDENT). APPLICATIONS: UPHOLSTERY, JOINERY, FURNITURE, INTERIOR FIT-OUT. AIR SUPPLY: STANDARD COMPRESSED AIR CONNECTION. SENCO	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENGTH: UP TO 90MM, FASTENER TYPE: CLIPPED HEAD FRAMING NAILS, OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR, TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT), APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING SENCO · SN90CXP	🔒 Subscribe
	JCB	TLT TELETRUK 35D 4X4	JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL DRIVE, ONLY 6059 LOW HOURS, 360 DEGREE ROTATOR. VERY GOOD CONDITION. JCB · TLT TELETRUK 35D 4X4	🔒 Subscribe
2005	DAEWOO		2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST WITH SIDE SHIFT. GOOD CONDITION ALL ROUND. 2005 · DAEWOO	🔒 Subscribe
2018	LINDE	H25D	2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WITH SIDE SHIFT, 5988 HOURS 2018 · LINDE · H25D	🔒 Subscribe
		IXTRACT	IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM IXTRACT	🔒 Subscribe
2006	HYSTER	3 TONNE	2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS 2006 · HYSTER · 3 TONNE	🔒 Subscribe
	KALMAR		7 TONNE DIESEL FORKLIFT SIDE SHIFT & FORK POSITION GOOD TYRES ALL ROUND KALMAR	🔒 Subscribe
	LINDE	H80D	LINDE H80D DIESEL FORKLIFT, WITH ROTATOR, 8 TONNE LIFT, LOW HOURS, 4.7M MAST LINDE · H80D	🔒 Subscribe
	CATERPILLAR		CATERPILLAR 3 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, 4 WHEELER, 4.2M CONTAINER MAST WITH SIDE SHIFT, GOOD BATTERY COMPLETE WITH CHARGER CATERPILLAR	🔒 Subscribe
	TOYOTA		TOYOTA 4 TONNE DIESEL FORKLIFT, 6472 HOURS, 4M MAST, GOOD CONDITION, 4 TONNE LIFT, 6472 HOURS, DIESEL 6 CYLINDER ENGINE TOYOTA	🔒 Subscribe

Year	Make	Model	Description	Price
	AMETEK LAND	THERMAL IMAGER BORESCOPE CAMERA	AMETEK LAND THERMAL IMAGER BORESCOPE CAMERA. THIS BORESCOPE CAMERA WILL NEED TO BE RECALIBRATED.	🔒 Subscribe
2020	HANGCHA		2020 HANGCHA FORKLIFT TRUCK 1800KG CAPACITY. 4700MM LIFT HEIGHT, CONTAINER SPEC. TRIPLEX. 4370 HOURS INTEGRAL SIDE-SHIFT AND LOAD GUARD SOLID TYRES	🔒 Subscribe
	HIROX	HDX-30	HIROX HDX-30 HYDRAULIC BREAKER TO SUIT 10-20 TON MACHINE	🔒 Subscribe
2015	LINDE	H25	2015 LINDE H25 DIESEL FORKLIFT TRUCK (TRIPLE MAST - 8800 HOURS) CONTAINER SPEC 2.5 TONNE LIFT GOOD TYRES ALL ROUND VERY WELL MAINTAINED LOW HOURS - 8800 5.5 MAST WITH SIDE SHIFT GOOD CONDITION ALL ROUND	🔒 Subscribe
			V TWIN HEAD LED WITH POWER TAKE OFF. APPROXIMATE DIMENSIONS: HEIGHT - 157CM WIDTH - 100CM DEPTH - 100CM	🔒 Subscribe
2014	CATERPILLAR		2014 CATERPILLAR 2 TONNE ELECTRIC FORKLIFT WITH ONLY 386 HOURS! 5 METRE LIFT, SIDE SHIFT, FULL WEATHER PROTECTION. S/N:	🔒 Subscribe
			CABLE ROLLERS - COR. APPROXIMATE DIMENSIONS: HEIGHT - 36CM WIDTH - 26CM DEPTH - 22CM	🔒 Subscribe
		ELITE	14 METER HSC ELITE FESTOON LIGHT - THX22256 POWER - 110V APPROXIMATE DIMENSIONS: LENGTH - 14 METERS	🔒 Subscribe
	HSC	ELITE	HSC ELITE WORK LIGHT VOLTAGE - 110V APPROXIMATE DIMENSIONS: HEIGHT - 28CM WIDTH - 24CM DEPTH - 7CM	🔒 Subscribe
			FESTOON LIGHT - 110V - APPROXIMATE LENGTH - 14M	🔒 Subscribe
2020	HELI		2020 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 6,088 HOURS. FEATURES A 3.7M MAST, GOOD TYRES, AND IS WELL MAINTAINED. GOOD CONDITION.	🔒 Subscribe
2015	HELI		2015 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 5,201 HOURS. FEATURES 2.5 TONNE LIFT CAPACITY, LOW HOURS, GOOD TYRES, 3.7M MAST, AND IS WELL MAINTAINED. GOOD CONDITION ALL ROUND.	🔒 Subscribe
2003	DAEWOO		2003 DAEWOO 1.5 GAS FORKLIFT TRUCK 1.5 TONNE LIFT 7,166 HOURS 3.5M MAST WITH SIDE SHIFT GOOD CONDITION ALL ROUND GOOD TYRES	🔒 Subscribe
2018	HELI	3 TONNE	2018 HELI 3 TONNE ELECTRIC FORKLIFT TRUCK WITH SIDE SHIFT. 4M MAST. LOW 1700 HOURS. GOOD BATTERY COMPLETE WITH CHARGER. OUTSTANDING CONDITION.	🔒 Subscribe
	YILMAZ	AIM 4410	20000 RPM 250 LT/MIN 14 KW 6 BAR 400V AC 3P PE WEIGHT - 3200KG W - 670CM / H - 220 / L - 325CM	🔒 Subscribe
2005	BUSELLATO	JET CONCEPT	2005 BUSELLATO JET CONCEPT POD & RAIL CNC MANUFACTURER - BUSELLATO MODEL - JET CONCEPT RUNNING AS IT SHOULD YEAR - 2005 SERIAL - 6226 KW - 16 A - 26 VOLTS - 400 HZ - 50/60 KA - 40	🔒 Subscribe
	QUILIGOTTI	TDE9	10 X PALLETS OF BRAND NEW QUILIGOTTI TERRAZZO COMMERCIAL TILES - TDE9. TOTAL COVERAGE PER PALLET IS 24 SQUARE YARDS / 20 SQUARE METRES. PALLET DIMENSIONS - 1M X 1M X 1M. TILE SIZE - 300MM X 300MM X30MM. TILE CODE - TDE9. PALLET WEIGHT 1200KG. THIS PRODUCT IS BRAND NEW AND MANUFACTURED BY QUILIGOTTI IN THE UK. ALL PALLETS ARE HEAT SEALED FOR SAFE TRANSPORTATION.	🔒 Subscribe
			7.2M FOOD SAFE BLUE CONVEYOR BELT SAFETY LINE CUT OFF SYSTEM	🔒 Subscribe
	WADKIN	CUT PRO 14	WADKIN CUT PRO 14 CHOP SAW 400 VOLT. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. 2 IDENTICAL CHOP SAWS AVAILABLE. USED FOR SET MANUFACTURING IN THE FILM AND TV INDUSTRY.	🔒 Subscribe
	CONFAB	6M 33 CONE	6M 33 CONE POULTRY DE BONING LINE SAFETY CAGES VARIABLE SPEED SAFETY LINE CUT OFF SYSTEM	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING.	🔒 Subscribe
2006	HAYTER	MT313	2006 HAYTER MT313 TRIPLE MOWER ROLL BAR 20HP 3 CYLINDER KUBOTA DIESEL ENGINE ROAD REGISTERED ROPS HST 3WD PAS INDEPENDENT FLOATING HEADS THIS 3WD ORNAMENTAL FINISHING MOWER HAS 7 KNIFE FLOATING HEAD UNITS AND A 2.1M CUTTING WIDTH. OPTIONAL CUT AND COLLECT WITH GRASS BOXES. THE REAR MOUNTED ENGINE MOVES NOISE AWAY FROM THE OPERATOR AND ALSO INCREASES VISIBILITY OF THE CUTTING UNITS. THE UNITS FULLY FOLD UP, REDUCING THE MACHINE WIDTH FOR TRANSPORT AND STORAGE. SUITABLE FOR CRICKET OUTFIELDS, TENNIS COURTS, TEE BOXES, ORNAMENTAL LAWNS AND SMALL PLAYING FIELDS WHERE A HIGHER QUALITY CUT IS IMPORTANT.	🔒 Subscribe
1999	NISSAN		1999 NISSAN 2.5 TONNE DIESEL FORKLIFT, 4.2M TRIPLE MAST, CONTAINER SPEC, NISSAN 4 CYLINDER ENGINE, 7673 HOURS, WITH SIDE SHIFT	🔒 Subscribe
2013	TOYOTA	5.5T GAS FORKTRUCK	2013 TOYOTA 5.5T GAS FORKTRUCK 4.3M TRIPLE MAST APPROX 2000 HOURS	🔒 Subscribe
2013	HAULOTTE	COMPACT 12	2013 HAULOTTE COMPACT 12 BATTERY SCISSOR LIFT 12 METRES WORKING HEIGHT	🔒 Subscribe
2018	MECALAC	TA3 S	2018 MECALAC TA3 S DUMPER 1559 HOURS 3 TONNE DUMPER SITE BEACONS CE MARKED	🔒 Subscribe
2017		POWER TOWER ECO	2017 POWER TOWER ECO 4.2M WORKING HEIGHT	🔒 Subscribe
			PRE FAB TEMPORARY SHOP METAL GIRDER SUPPORTS AND BEAMS WITH A WOODEN FLOOR AND TARP WALLS T SHAPE BUILDING TARP HAS SOME RIPS IN APPROXIMATE VERTICAL METAL BEAM HEIGHT - 400CM APPROXIMATE DIAGONAL METAL BEAM LENGTH - 420CM APPROXIMATE DIMENSIONS: HEIGHT - 4M WIDTH - 32M DEPTH - 20M	🔒 Subscribe
2018	DAF	CF 450 FTG SPACE CAB	2018 DAF CF 450 FTG SPACE CAB TRACTOR UNIT, EURO 6, 544K KM'S, COLOUR WHITE, FUEL TYPE DIESEL, AUTO GEARBOX, AIR KIT, LIFT & STEER SECOND AXLE, SERVICED	🔒 Subscribe
	LINDE	12 TONNE	12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER	🔒 Subscribe
2000	LINDE	H45D	2000 LINDE H45D 4.5 TONNE FORKLIFT WITH PERKINS ENGINE. VERY WELL MAINTAINED.	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. TYPE: PNEUMATIC CLIPPED HEAD FRAMING NAILER. FASTENER LENGTH: UP TO 90MM. FASTENER TYPE: CLIPPED HEAD FRAMING NAILS. OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR. TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT). APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING.	🔒 Subscribe
	SENCO		3 X SENCO PNEUMATIC STAPLE GUNS WITH CARRY CASES, MANUALS, ACCESSORIES & 6M RETRACTABLE HOSE REELS. MANUFACTURER: SENCO. TYPE: PNEUMATIC STAPLE GUNS. OPERATING PRESSURE: TYPICALLY UP TO 120 PSI / 8.3 BAR (MODEL DEPENDENT). APPLICATIONS: UPHOLSTERY, JOINERY, FURNITURE, INTERIOR FIT-OUT. AIR SUPPLY: STANDARD COMPRESSED AIR CONNECTION.	🔒 Subscribe
	SENCO	SN90CXP	SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENGTH: UP TO 90MM, FASTENER TYPE: CLIPPED HEAD FRAMING NAILS, OPERATING PRESSURE: MAX: 120 PSI / 8.3 BAR, TRIGGER TYPE: SEQUENTIAL / CONTACT (MODEL DEPENDENT), APPLICATION: FRAMING, TIMBER CONSTRUCTION, DECKING, FENCING	🔒 Subscribe
	JCB	TLT TELETRUK 35D 4X4	JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL DRIVE, ONLY 6059 LOW HOURS, 360 DEGREE ROTATOR. VERY GOOD CONDITION.	🔒 Subscribe
2005	DAEWOO		2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST WITH SIDE SHIFT. GOOD CONDITION ALL ROUND.	🔒 Subscribe
2018	LINDE	H25D	2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WITH SIDE SHIFT, 5988 HOURS	🔒 Subscribe
		IXTRACT	IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM	🔒 Subscribe
2006	HYSTER	3 TONNE	2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS	🔒 Subscribe
	KALMAR		7 TONNE DIESEL FORKLIFT SIDE SHIFT & FORK POSITION GOOD TYRES ALL ROUND	🔒 Subscribe
	LINDE	H80D	LINDE H80D DIESEL FORKLIFT, WITH ROTATOR, 8 TONNE LIFT, LOW HOURS, 4.7M MAST	🔒 Subscribe
	CATERPILLAR		CATERPILLAR 3 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, 4 WHEELER, 4.2M CONTAINER MAST WITH SIDE SHIFT, GOOD BATTERY COMPLETE WITH CHARGER	🔒 Subscribe
	TOYOTA		TOYOTA 4 TONNE DIESEL FORKLIFT, 6472 HOURS, 4M MAST, GOOD CONDITION, 4 TONNE LIFT, 6472 HOURS, DIESEL 6 CYLINDER ENGINE	🔒 Subscribe

AMETEK LAND THERMAL IMAGER BORESCOPE CAMERA

MEDICAL & BIOTECH EQUIPMENT

AMETEK LAND THERMAL IMAGER BORESCOPE CAMERA. THIS BORESCOPE CAMERA WILL NEED TO BE RECALIBRATED....

Hammer Price: 🔒

2020 HANGCHA

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2020 HANGCHA FORKLIFT TRUCK 1800KG CAPACITY. 4700MM LIFT HEIGHT, CONTAINER SPEC. TRIPLEX. 4370 HOURS...

Hammer Price: 🔒

HIROX HDX-30

CONSTRUCTION EQUIPMENT

HIROX HDX-30 HYDRAULIC BREAKER TO SUIT 10-20 TON MACHINE...

Hammer Price: 🔒

2015 LINDE H25

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2015 LINDE H25 DIESEL FORKLIFT TRUCK (TRIPLE MAST - 8800 HOURS) CONTAINER SPEC 2.5 TONNE LIFT GOOD T...

Hammer Price: 🔒

MISC

V TWIN HEAD LED WITH POWER TAKE OFF. APPROXIMATE DIMENSIONS: HEIGHT - 157CM WIDTH - 100CM DEPTH - 10...

Hammer Price: 🔒

2014 CATERPILLAR

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2014 CATERPILLAR 2 TONNE ELECTRIC FORKLIFT WITH ONLY 386 HOURS! 5 METRE LIFT, SIDE SHIFT, FULL WEATH...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CABLE ROLLERS - COR. APPROXIMATE DIMENSIONS: HEIGHT - 36CM WIDTH - 26CM DEPTH - 22CM...

Hammer Price: 🔒

ELITE

MISC

14 METER HSC ELITE FESTOON LIGHT - THX22256 POWER - 110V APPROXIMATE DIMENSIONS: LENGTH - 14 METERS...

Hammer Price: 🔒

HSC ELITE

POWER AND HAND TOOLS

HSC ELITE WORK LIGHT VOLTAGE - 110V APPROXIMATE DIMENSIONS: HEIGHT - 28CM WIDTH - 24CM DEPTH - 7CM...

Hammer Price: 🔒

MISC

FESTOON LIGHT - 110V - APPROXIMATE LENGTH - 14M...

Hammer Price: 🔒

2020 HELI

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2020 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 6,088 HOURS. FEATURES A 3.7M MAST, GOOD TYRES, AND IS...

Hammer Price: 🔒

2015 HELI

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2015 HELI 2.5 TONNE DIESEL FORKLIFT TRUCK WITH 5,201 HOURS. FEATURES 2.5 TONNE LIFT CAPACITY, LOW HO...

Hammer Price: 🔒

2003 DAEWOO

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2003 DAEWOO 1.5 GAS FORKLIFT TRUCK 1.5 TONNE LIFT 7,166 HOURS 3.5M MAST WITH SIDE SHIFT GOOD CONDITI...

Hammer Price: 🔒

2018 HELI 3 TONNE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2018 HELI 3 TONNE ELECTRIC FORKLIFT TRUCK WITH SIDE SHIFT. 4M MAST. LOW 1700 HOURS. GOOD BATTERY COM...

Hammer Price: 🔒

YILMAZ AIM 4410

CNC MACHINE CENTERS

20000 RPM 250 LT/MIN 14 KW 6 BAR 400V AC 3P PE WEIGHT - 3200KG W - 670CM / H - 220 / L - 325CM...

Hammer Price: 🔒

2005 BUSELLATO JET CONCEPT

CNC MACHINE CENTERS

2005 BUSELLATO JET CONCEPT POD & RAIL CNC MANUFACTURER - BUSELLATO MODEL - JET CONCEPT RUNNING AS IT...

Hammer Price: 🔒

QUILIGOTTI TDE9

MISC

10 X PALLETS OF BRAND NEW QUILIGOTTI TERRAZZO COMMERCIAL TILES - TDE9. TOTAL COVERAGE PER PALLET IS ...

Hammer Price: 🔒

MISC

7.2M FOOD SAFE BLUE CONVEYOR BELT SAFETY LINE CUT OFF SYSTEM...

Hammer Price: 🔒

WADKIN CUT PRO 14

METALWORKING & FABRICATION EQUIPMENT

WADKIN CUT PRO 14 CHOP SAW 400 VOLT. NEW BLADE AND NEW REPLACEMENT MOTOR FITTED. 2 IDENTICAL CHOP SA...

Hammer Price: 🔒

CONFAB 6M 33 CONE

FOOD PROCESSING AND RESTAURANT EQUIPMENT

6M 33 CONE POULTRY DE BONING LINE SAFETY CAGES VARIABLE SPEED SAFETY LINE CUT OFF SYSTEM...

Hammer Price: 🔒

SENCO SN90CXP

POWER AND HAND TOOLS

SENCO SN90CXP PNEUMATIC CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. FASTENER LENGTH: ...

Hammer Price: 🔒

2006 HAYTER MT313

AGRICULTURAL EQUIPMENT

2006 HAYTER MT313 TRIPLE MOWER ROLL BAR 20HP 3 CYLINDER KUBOTA DIESEL ENGINE ROAD REGISTERED ROPS HS...

Hammer Price: 🔒

1999 NISSAN

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1999 NISSAN 2.5 TONNE DIESEL FORKLIFT, 4.2M TRIPLE MAST, CONTAINER SPEC, NISSAN 4 CYLINDER ENGINE, 7...

Hammer Price: 🔒

2013 TOYOTA 5.5T GAS FORKTRUCK

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2013 TOYOTA 5.5T GAS FORKTRUCK 4.3M TRIPLE MAST APPROX 2000 HOURS...

Hammer Price: 🔒

2013 HAULOTTE COMPACT 12

CONSTRUCTION EQUIPMENT

2013 HAULOTTE COMPACT 12 BATTERY SCISSOR LIFT 12 METRES WORKING HEIGHT...

Hammer Price: 🔒

2018 MECALAC TA3 S

CONSTRUCTION EQUIPMENT

2018 MECALAC TA3 S DUMPER 1559 HOURS 3 TONNE DUMPER SITE BEACONS CE MARKED...

Hammer Price: 🔒

2017 POWER TOWER ECO

MISC

2017 POWER TOWER ECO 4.2M WORKING HEIGHT...

Hammer Price: 🔒

MISC

PRE FAB TEMPORARY SHOP METAL GIRDER SUPPORTS AND BEAMS WITH A WOODEN FLOOR AND TARP WALLS T SHAPE BU...

Hammer Price: 🔒

2018 DAF CF 450 FTG SPACE CAB

TRUCKS, TRAILERS & VEHICLES

2018 DAF CF 450 FTG SPACE CAB TRACTOR UNIT, EURO 6, 544K KM'S, COLOUR WHITE, FUEL TYPE DIESEL, AUTO ...

Hammer Price: 🔒

LINDE 12 TONNE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

12 TONNE DIESEL FORKLIFT, 1770 HOURS, FULL CAB, SIDE SHIFT, FORK POSITIONER...

Hammer Price: 🔒

2000 LINDE H45D

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2000 LINDE H45D 4.5 TONNE FORKLIFT WITH PERKINS ENGINE. VERY WELL MAINTAINED....

Hammer Price: 🔒

SENCO SN90CXP

POWER AND HAND TOOLS

SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER WITH CARRY CASE & ACCESSORIES. TYPE: PNEUMATIC CLIPPE...

Hammer Price: 🔒

SENCO

POWER AND HAND TOOLS

3 X SENCO PNEUMATIC STAPLE GUNS WITH CARRY CASES, MANUALS, ACCESSORIES & 6M RETRACTABLE HOSE REELS. ...

Hammer Price: 🔒

SENCO SN90CXP

POWER AND HAND TOOLS

SENCO SN90CXP 90MM CLIPPED HEAD FRAMING NAILER, PNEUMATIC CLIPPED HEAD FRAMING NAILER, FASTENER LENG...

Hammer Price: 🔒

JCB TLT TELETRUK 35D 4X4

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

JCB TLT TELETRUK 35D 4X4 FORKLIFT WITH ROTATOR. 3.5 TONNE LIFT WITH SIDE SHIFT, 4 WHEEL DRIVE, ONLY ...

Hammer Price: 🔒

2005 DAEWOO

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2005 DAEWOO 1.5 TONNE LIFT CONTAINER SPEC GAS FORKLIFT, 6000 HOURS. GOOD TYRES ALL ROUND. 4.2M MAST ...

Hammer Price: 🔒

2018 LINDE H25D

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2018 LINDE H25D 2.5 TONNE DIESEL FORKLIFT, CONTAINER SPEC, VW ENGINE, WELL MAINTAINED, 4.6M MAST WIT...

Hammer Price: 🔒

IXTRACT

MEDICAL & BIOTECH EQUIPMENT

IXTRACT EXTRACTION SYSTEM - EXTRACTION SYSTEM...

Hammer Price: 🔒

2006 HYSTER 3 TONNE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2006 HYSTER 3 TONNE DIESEL FORKLIFT, SIDE SHIFT, FORK SPREADER, 4.1M LIFT, ONLY 4600 HOURS...

Hammer Price: 🔒

KALMAR

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

7 TONNE DIESEL FORKLIFT SIDE SHIFT & FORK POSITION GOOD TYRES ALL ROUND...

Hammer Price: 🔒

LINDE H80D

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

LINDE H80D DIESEL FORKLIFT, WITH ROTATOR, 8 TONNE LIFT, LOW HOURS, 4.7M MAST...

Hammer Price: 🔒

CATERPILLAR

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CATERPILLAR 3 TONNE ELECTRIC FORKLIFT, CONTAINER SPEC, 4 WHEELER, 4.2M CONTAINER MAST WITH SIDE SHIF...

Hammer Price: 🔒

TOYOTA

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOYOTA 4 TONNE DIESEL FORKLIFT, 6472 HOURS, 4M MAST, GOOD CONDITION, 4 TONNE LIFT, 6472 HOURS, DIESE...

Hammer Price: 🔒

<< Previous 4 5 6 7 8

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Weekly Plant Machinery Auction Car Transporter Vans From Frasers Group Containers Forklifts Dumpers Boom Lifts Excavators More

Save to Project Folder

Print Options

Save to Project Folder