Plant Machinery Commercial Vehicles Includes Truck From NEC Forklifts Containers Trucks Trailers Excavators Site Cabins Equipment

TWO AXLE STANDS SUITABLE FOR 4X4S

BOSS ACCESS TOWERS AND PLATFORMS - OVER 2,000 PIECES. ARMORGARD CUTTING STATIONS. TUFFBANK LOCKBOXES. CHEMICAL STORES. ACCESS EQUIPMENT. LEVPANO PLASTERBOARD LIFTERS.

2007 CONCRETE RECYCLING CRUSHER, CUSTOM BUILT, BELT PROTECTION, TWIN MAGNETS, PEGSON JAW, SPARE TEETH

18T HGV TRUCK CONVERTED INTO A PIZZA TRUCK, 2 PROFESSIONAL OVENS: 1. NEAPOLITAN WOOD OVEN WITH CAPACITY FOR 6 PIZZAS, 2. MARANA OVEN ROTANTE MODEL 95 GAS AND WOOD (BRAND NEW), DUAL SINK WITH HOT AND COLD WATER (BRAND NEW), 2 X WORKTOP PIZZA FRIDGE (BRAND NEW), POWER GENERATOR, DRINKS FRIDGE, TRUCK IS ROAD LEGAL, READY TO ATTEND ANY KIND OF EVENTS DUE TO HIGH CAPACITY OVENS, APPROXIMATELY 300,000 MILES

2017 ATLAS 350 MH MATERIAL HANDLER (12K HOURS) MANUFACTURER - ATLAS MODEL 350 MH MATERIAL HANDLER 12K HOURS

2019 DAF CF EURO 6 32 TON TIPPER APPROX 164,450 MILES OR 264,658 KMS MOT TO 31/12/25 CONDITION USED APPROXIMATE MILEAGE 164450 MILES OR 264,658 KM'S VALID MOT TO 31ST DECEMBER 2025 - NO ADVISORIES REG. MARK **69 *** EXTERIOR COLOUR WHITE HORSEPOWER (BHP) 462 ENGINE SIZE 10837 MODEL YEAR 2019 MANUFACTURER DAF TRUCKS MODEL CF TYPE TIPPER DRIVE SIDE RIGHT-HAND DRIVE FUEL TYPE DIESEL YEAR OF FIRST REGISTRATION 2019 GROSS VEHICLE WEIGHT 3200 VEHICLE MAKE: DAF VEHICLE MODEL: CF 450 TIPPER YEAR: 2019. MOT: 2024. KEYS: 1 KEYS SERVICE HISTORY: COMPREHENSIVE OPTIONS: STEEL TIPPING BODY MANUAL GEARBOX EURO 6 FURTHER DETAILS: COMPREHENSIVE SERVICE FOLDER, LONG TEST, REFURBISHED BODY EURO 6 TIPPER

2 X INSTRON HYDRAULIC TENSION TORSION TEST MACHINES 2 X INSTRON TEST FRAMES COMPLETE WITH INSTRON 3520 POWER PACK AND DONALDSON ULTRAFILTER HEAT EXCHANGER INCLUDES HYDRAULIC HOSING TO CONNECT THE SYSTEM DONALDSON CHILLER INCLUDED

2010 LIEBHERR R934C SCRAP HANDLER 13,500 HOURS GOOD CONDITION AND WORKS WELL GOOD UNDERCARRIAGE, HYDRAULIC HIGH RISE CAB AND LONG REACH REHANDLING ARM

2013 DOOSAN 9 TONNE DIESEL FORKLIFT, 4671 HOURS, 4.1M LIFT - 2013 DOOSAN 9 TONNE FORKLIFT, DIESEL 4671 HOURS, 4.1M LIFT

2011 TOYOTA 7 TONNE DIESEL ONLY 2609 HOURS FULL CAB SPARE 3RD & 4TH SERVICE

2018 MERCEDES-BENZ ACTROS 2546L 6X2 DRAWBAR C/W HIAB 145 DL-1 HI PRO LOADER CRANE WITH MTE BODY & TRAILER VRN - AY18 JXA 440,265 KM'S / 273567 MILES EURO 6 460 BHP, AUTOMATIC SINGLE SLEEPER REAR LIFT AXLE MICROWAVE, IN CAB CRANE CONTROL, GRAB CRANE, SUPPORT LEGS COLOUR: BLUE FUEL TYPE - DIESEL DATE REGISTERED - 29 JUNE 2018 ANNUAL TEST VALID UNTIL - 30 APRIL 2025

1964 FORD MUSTANG D-CODE (289 V8) REGISTERED 15TH DECEMBER 1964 - 65,255 MILES - 1964 FORD MUSTANG D-CODE (289 V8) REGISTERED 15TH DECEMBER 1964 - 65,225 MILES YEAR - 1964 MILEAGE - 65,255 METALLIC PAINT - YES PREVIOUSLY REGISTERED OVERSEAS - YES BODY TYPE - COUPE NUMBER OF SEATS - 4 TRANSMISSION - AUTOMATIC SERVICE HISTORY AVAILABLE - YES EXTERIOR COLOUR - GREY FUEL TYPE - PETROL DRIVE SIDE - LEFT-HAND DRIVE FUEL - PETROL MODEL - V8 MANUFACTURER - FORD NUMBER OF DOORS - 2 INTERIOR COLOUR - BLACK COUNTRY/REGION OF MANUFACTURE - UNITED STATES ENGINE - 289 V8 V5C REGISTRATION DOCUMENT - PRESENT 196412 FORD MUSTANG D-CODE 289 V8 15TH DECEMBER 1964 GENUINELY GOOD CONDITION AND READY TO DRIVE. THE CAR HAS BEEN RESPRAYED IN RECENT YEARS, AND THE PAINTWORK IS IN GOOD SHAPE, BOASTING A DEEP SHINE THAT LOOKS FANTASTIC IN THE SUN (FORD MAGNETIC GREY METALLIC). THE CHROME IS ALSO IN GOOD CONDITION, WITH ONLY A MINOR MARK ON THE REAR BUMPER, WHICH IS HARDLY NOTICEABLE UNLESS YOU'RE LOOKING UNDERNEATH. MECHANICALLY, STARTS IN LESS THAN HALF A TURN FIRES STRAIGHT UP, PULLS SMOOTHLY THROUGH ALL GEARS, WITH EVERYTHING WORKING AS IT SHOULD. IT SOUNDS LIKE A TRUE V8, TURNING HEADS WHEREVER IT GOES. THE ENGINE RUNS SMOOTHLY. STORED IN THE VENDORS GARAGE - PHOTOS OF THE CAR WHEN IT ARRIVED FROM THE STATES ABOUT 6-7 YEARS AGO ARE PRESENT AND PURCHASED IT FROM A MUSTANG DEALER IN THE UK. LOTS OF HISTORY WITH THE CAR DATING BACK YEARS TO SHOW RECEIPTS OF REBUILD AND OTHER WORK CARRIED OUT CAR HISTORY FULL ORIGINAL ENGINE REBUILD IN THE STATES ( 9-05-2015 AT 63,987.9 KM ) ONLY LESS THAN 1200 KM'S AGO BUILD : DEARBORN BUILD DATE : 15TH DECEMBER 1964 ORIGINAL COLOUR : SPRINGTIME YELLOW SOLD FROM 53 DISTRICT KANSAS CITY KEY FEATURES AND RECENT WORK SPEC D CODE 4V 289 V8 3 SPEED C4 AUTO GEARBOX EDELBROCK PERFORMER PACKAGE EDELBROCK PERFORMER CAM + LIFTERS EDELBROCK PERFORMER MANIFOLD EDELBROCK 4V CARBURETTOR HI-PO AIR CLEANER HI-PO VALVE COVERS MONTE CARLO BAR REBUILT SERVO ASSISTED BRAKES (NEW) REBUILT SUSPENSION NEW FRONT DAMPERS REAR AIR LIFT DAMPERS NEW FUEL TANK AND SENDER POWER STEERING ELECTRIC COOLING FAN (ENGINE) GOOD INTERIOR NO RIPS AND TEARS RPM DIGITAL DIAL AND PRESSURE HEATER RADIO SEAT BELTS LEGEND SERIES ALLOYS ADDITIONAL DETAILS: NEW BATTERY RECENTLY FITTED ORIGINAL LIGHTS WILL BE REINSTALLED BEFORE THE SALE TIDY BODYWORK UNDERNEATH GOOD TIRE TREAD HAS BEEN TREATED UNDERNEATH READY FOR THE NEW OWNER (PICTURES IN THE LISTING)

GROUP OF STAINLESS STEEL TANKS, 5 IN TOTAL, 7M LONG, BRAND NEW & UNUSED. 2 STAINLESS STEEL TANKS ARE 1500MM HIGH AND 800MM WIDE. 3 STAINLESS STEEL TANKS ARE 800MM WIDE. HEATERS CAN BE ADDED TO THE 2 X 900MM WIDE TANKS. ALL ARE REINFORCED WITH BANDS AROUND. THEY ALL HAVE STAINLESS STEEL GUIDES TO PREVENT ANY DAMAGE TO THE WALLS WHICH CAN BE CAUSED BY BASKETS BEING LOWERED AND RAISED INTO/OUT OF THE TANKS. ALSO INCLUDES SMALL TANKS ON THE END TO ALLOW FOR FRESH WATER CIRCULATION IF IT IS NEEDED.

2018 JCB 940 4 TONNE 2WD ROUGH TERRAIN FORKLIFT, 4.5M FULL FREE LIFT MAST, 7903 HOURS

2015 JCB 940 ROUGH TERRAIN FORKLIFT 4X4 6137 HOURS 4 TONNE LIFT 4 SPEED 5.5 METRE LIFT WITH SIDE SHIFT TOYOTA OIL LOW HOURS VERY GOOD TYRES ALL ROUND

2012 HELI HFD100 FORKLIFT 10 TONNE DIESEL FORKLIFT, 3.3 METRE LIFT, SIDE SHIFT AND FORK POSITIONER. 2700MM LONG FORKS, 9616 HOURS, 2012 MODEL, CUMMINS ENGINE, ONE DOOR SLIGHTLY DAMAGED.

2006 MANITOU M26 2.6 TONNE 4WD ROUGH TERRAIN FORKLIFT, 3675 HOURS, 5.5M LIFT, SIDE SHIFT

2021 MITSUBISHI FUSO CANTER 3C13, 62895 MILES, WITH RAPIDE TANKER, BATTONI 2000 PUMP & HONDA ENGINE - 2021 MITSUBISHI FUSO CANTER 3C13 USED FOR EMPTYING WASTE FROM PORTALOOS AND SIMILAR STRUCTURES 62895 MILES REGISTRATION KV70 XOU REGISTERED 28TH JANUARY 2021 DIESEL MOT EXPIRED 19TH MAY 2025 MILEAGE ON LAST MOT ON 20TH MAY 2024 WAS 58,471 MILES WITH RAPID TANKER, BATTONI MAC 2000 PUMP AND HONDA ENGINE HAS 2 TOOL BOXES AND REVERSING CAMERA

2017 JCB JS20MH REHANDLER (14K HOURS) HYDRAULIC HIGH RISE CAB, SOLID TYRES, LONG REACH ARM AND ROTATING SELECTOR GRAB

2020 BOBCAT E27Z EXCAVATOR ONLY 1531 HOURS QUICK HITCH 3 BUCKETS DOUBLE ACTING HAMMER LINES PROPORTIONAL CONTROLS CE MARKED

DOOSAN 3.5 TONNE ELECTRIC FORKLIFT, DEMO TRUCK ONLY 11 HOURS!!, CONTAINER SPEC, CHARGER INCLUDED 3.5 TONNE LIFT EX DEMO ONLY 11 HOURS FROM NEW TRUCK IS AS NEW WITH A BRAND NEW BATTERY WHICH HAS JUST BEEN FITTED 4.2M TRIPLE MAST WITH SIDE SHIFT SAFETY CERTIFICATE AND DELIVERY INCLUDED

2015 DAF LF220 FA HOT BOX, USED FOR ROAD MAINTENANCE TASKS, SUCH AS TRANSPORTING AND APPLYING HOT ASPHALT FOR POTHOLE REPAIRS MOT UNTIL 31ST OCTOBER 2025, MILEAGE 250635KM REG HX65XYW DIESEL MANUAL GEARBOX

2011 JCB JS160 REHANDLER (9500 HOURS) HYDRAULIC HIGH RISE CAB AND SOLID TYRES

2010 LIEBHERR 934C SCRAP HANDLER (15,500 HOURS) VERY GOOD CONDITION HYDRAULIC HIGH RISE CAB, SOLID TYRES AND LONG REACH REHANDLING ARM

OMME 1750RBD DUAL FUEL TRACKED SPIDER LIFT - ACCESS PLATFORM - CHERRY PICKER KEY FEATURES AND SPECIFICATIONS: MANUFACTURER: OMME MODEL: 1750RBD MAX WORKING HEIGHT: 57 FEET (17.7 METERS) MAX OUTREACH: 30 FEET (9.3 METERS) PLATFORM CAPACITY: 440 LBS (200 KG) PLATFORM SIZE: 4.1 FEET X 2.4 FEET (1.25M X 0.74M) STOWED DIMENSIONS: LENGTH 21.3 FEET (6.5 METERS), WIDTH 4.1 FEET (1.25 METERS), HEIGHT 6.9 FEET (2.1 METERS) WEIGHT: 4,630 LBS (2,100 KG) POWER OPTIONS: DUAL POWER (DIESEL AND 24V DC ELECTRIC) FOR MAXIMUM FLEXIBILITY ON ALL JOB SITES DRIVE SYSTEM: TRACKED CHASSIS FOR EXCELLENT STABILITY AND MANEUVERABILITY, EVEN ON UNEVEN OR SLOPED TERRAIN. ROTATION: 360-DEGREE CONTINUOUS TURRET ROTATION FOR FLEXIBLE POSITIONING JIB ARTICULATION: HYDRAULIC ARTICULATING JIB ALLOWS PRECISE MOVEMENT, PERFECT FOR TRICKY AND TIGHT SPACES. GRADEABILITY: HANDLES UP TO 40% GRADIENT WITH EASE. OUTRIGGERS: HYDRAULIC, MULTI-POSITION OUTRIGGERS PROVIDE A STABLE AND SECURE BASE ON ROUGH OR SLOPED SURFACES. SAFETY FEATURES: LOAD-SENSING SYSTEM, EMERGENCY LOWERING SYSTEM, AUTOMATIC LEVELING, AND FULL HARNESS ATTACHMENT POINTS FOR MAXIMUM WORKER SAFETY.

PBP CBX30 MOBILE CONCRETE BATCHING PLANT WITH LAB - PBP CBX30 MOBILE MIXING PLANT WITH LAB FRENCH COMPANY SPECIALISING IN CIVIL ENGINEERING EQUIPMENT. THE BADGE VISIBLE ON THE MACHINE CONFIRMS ITS ORIGIN. THIS UNIT IS DESIGNED FOR ON-SITE CONCRETE PRODUCTION AND INCLUDES AN INTEGRATED FIELD LAB, HOPPER, AND GENERATOR. GENERAL SIGNS OF USE INCLUDES: - MASTERPOWER MBD120 DIESEL GENERATOR 3 PHASE 400/230V 174AMPS 1500RPM 4M11G120/5, SERIAL NUMBER 4720A000023 WORKING HOURS ON THIS GENERATOR WERE NOT ABLE TO BE RECORDED AS NO KEY AVAILABLE - FIELD LAB WITH COMPUTER SET UP - ALL IN A TRUCK BED - SEVERAL ELECTROMAGNETIC FLOW METERS - SEVERAL ELECTROMAGNETIC POSITIONERS - LARGE HOPPER (THERE ARE NO KEYS FOR GENERATOR AND LAB ROOM) APPROXIMATE DIMENSIONS: HEIGHT - 413CM WIDTH - 290CM LENGTH - 1300CM

2014 VOLVO FMX GRABBER TIPPER - 414217KM / 257382 MILES - MOT TO 30TH SEP 2025. PALFINGER EPSILON M125L CLASSIC CRANE. 8 WHEELER. EURO 6.

2018 HELI 4 TONNE DIESEL FORKLIFT ONLY 818 HOURS 3.9M FULL FREE LIFT TRIPLE MAST SIDE SHIFT

CATERPILLAR 4 TONNE DIESEL FORKLIFT TRIPLE MAST 5084 HOURS 4.6M MAST WITH SIDE SHIFT ORIGINAL TRUCK 4 TONNE LIFT LOW 5084 HOURS DIESEL ENGINE PART CAB RECENT NEW TYRES GOOD CONDITION ALL ROUND

2012 LINDE H80D 8 TONNE DIESEL FORKLIFT, 9721 HOURS, LONG FORKS 5.6 METRE LIFT GOOD TYRES ALL ROUND

2014 ESSEMTEC COBRA-8C - MODEL F8X2/T-V2 8MM HYQ TAPE FEEDER NOW INCLUDES PICK/PLACE MACHINE. EQUIPMENT: 8MM HYQ TAPE FEEDER. MAKE: ESSEMTEC COBRA-8C. MODEL: F8X2/T-V2. MANUFACTURE DATE: 2014. NOW INCLUDES PICK & PLACE MACHINE AND 2 X CARTRIDGES. THE ESSEMTEC 8MM HYQ TAPE FEEDER IS DESIGNED FOR USE WITH THE ESSEMTEC COBRA/8C AND MDS 720 PICK AND PLACE MACHINES. THIS TAPE FEEDER ENSURES EFFICIENT AND RELIABLE COMPONENT FEEDING, CONTRIBUTING TO THE OVERALL PRODUCTIVITY AND ACCURACY OF THE ASSEMBLY PROCESS. THE ESSEMTEC 8MM HYQ TAPE FEEDER IS A HIGH-PRECISION, DURABLE, AND VERSATILE COMPONENT FEEDING SOLUTION FOR THE ESSEMTEC COBRA/8C AND MDS 720 PICK AND PLACE MACHINES. WITH ITS ROBUST CONSTRUCTION, USER-FRIENDLY OPERATION, AND EFFICIENCY, IT IS AN ESSENTIAL COMPONENT IN ENSURING ACCURATE AND RELIABLE SMT ASSEMBLY. THIS TAPE FEEDER IS WELL-SUITED FOR HIGH-SPEED PRODUCTION ENVIRONMENTS, CONTRIBUTING TO IMPROVED PRODUCTIVITY AND CONSISTENT PLACEMENT QUALITY. APPROXIMATE DIMENSIONS - WIDTH: 50 MM (1.97 INCHES) - DEPTH: 200 MM (7.87 INCHES) - HEIGHT: 100 MM (3.94 INCHES) - WEIGHT: 1 KG (2.2 LBS). SERIAL NO: 1114010. MODEL NO: F8X2/T-V2.

2017 GENIE Z45/25 BI-ENERGY BOOM LIFT (ONLY 450 HOURS) YEAR OF MANUFACTURE - 2017 MANUFACTURER - GENIE MODEL - Z45/25 BI-ENERGY RUNNING HOURS - 450 (AS SHOWN ON CLOCK COUNTER) THE MACHINE HAS BEEN FULLY PREPPED AND SERVICED WORKS CARRIES OUT INCLUDE: (1). WASHED AND INSPECTED ON ARRIVAL (2). NEW TVH BATTERY FITTED (START BATTERY) (3). FULL SERVICE UNDERTAKEN, INCLUDING: AIR FILTER CHANGE OIL FILTER CHANGE FUEL FILTER CHANGE HYDRAULIC FILTER CHANGE ENGINE OIL CHANGE (10W40) (4). THE MACHINE HAS HAD A NEW START BATTERY FITTED - ALSO THE MAIN BATTERY HAD BEEN CHARGED FULLY CHARGED. BOTH A SPECIFIC GRAVITY TEST AND A LOAD TEST ON THE MAIN BATTERY (TO ESTABLISH BATTERY'S "HEALTH") HAVE BEEN CONDUCTED ==> ==> THE MAIN BATTERY CONSISTS OF 8X SMALLER BATTERIES CONJOINED TOGETHER RESULTS OF THOSE 2X TESTS CAN BE FOUND BELOW: (A). SPECIFIC GRAVITY TEST ==> 1,255 -1,260 WHICH IS ABOUT 98% OF BRAND NEW (NEW ON AVERAGE 1,270) (B). LOAD TEST - THERE ARE 8X SMALLER BATTERIES THAT MAKE UP THE MAIN BATTERY (4 ON EITHER SIDE). 7 OF THESE ARE HOLDING FULL 6V (EVEN 6.1V) - THEY HOLD 100% CHARGE BATTERY NO 8 HAS DROPPED TO 4.2 V (AFTER FEW WEEKS) - SO IT'S ABOUT 70% OF NEW/FULL CHARGE ==> THIS WILL BE REPLACED WITH A NEW BATTERY BEFORE COLLECTED BY THE WINNING BIDDER A FULL SERVICE HAS ALREADY DONE, ANEW START BATTERY FITTED, NEW OPERATOR MANUAL IS INCLUDED WITH THE MACHINE, AND THE MAIN BATTERY IN CLOSE TO 100% HEALTH.

2018 DOOSAN 4.5 TONNE DIESEL FORKLIFT, ONLY 1553 HOURS, CONTAINER SPEC, 4M MAST WITH 3RD & 4TH

2012 JCB TLT30D 3 TONNE 2WD ROUGH TERRAIN FORKLIFT ONLY 3396 HOURS 4M BOOM GOOD TYRES ALL ROUND

2018 LINDE H30D 3 TONNE DIESEL FORKLIFT, 6822 HOURS, 4.6M FULL FREE LIFT, SIDE SHIFT, FULL CAB

2021 HABRAKEN HM814-D WORKSTATION FOR SIDE AIRBAG COVER SEWING HABRAKEN SIDE AIRBAG COVER WORKSTATION. (USED TO SEW IN AIRBAGS AND LABELS FOR CAR SEAT COVERS). HM814-D - WORKSTATION FOR SIDE AIRBAG COVER SEWING YEAR 2021

2007 LINDE H4.5D TONNE DIESEL FORKLIFT, 4100MM LIFT, RECENT NEW TYRES, 7223 HOURS - 2007 LINDE 4.5 TONNE DIESEL FORKLIFT 4100MM LIFT LIFTING CAPACITY 4500KG RECENT NEW TYRES ALL ROUND 2007 MODEL 7223 HOURS WELL MAINTAINED

2007 LINDE H50D 5 TONNE DIESEL FORKLIFT TRUCK, 4 METRE LIFT, FORK POSITIONER, DIESEL, 12184 HOURS - LINDE H50D DIESEL FORKLIFT TRUCK 4 METRE LIFT FORK POSITIONER DIESEL ENGINE 12184 HOURS YEAR OF MANUFACTURE 2007 5 TONNE LIFT CAPACITY FORK POSITIONER VERY GOOD TYRES NEW 2M FORKS

2020 UNIFY HIGH FREQUENCY MACHINE

2018 RUIZHOU CNC CUTTING MACHINE RZCRT5-2516 YEAR OF MANUFACTURE 2018 CONDITION: USED, GOOD

2017 EBM KDP400 EDGEBANDER INCLUDES GTEC COMPRESSOR AND AIR TANK APPROXIMATE DIMENSIONS ARE: 4000MM, 1200MM WIDE, AND 1400MM HIGH CURRENTLY IN DAILY USE AND IN GOOD WORKING ORDER

2011 DOOSAN FORKLIFT TRUCK 7000KG CAPACITY 5000 MM LIFT HEIGHT TRIPLEX. YEAR 2011 3600 HOURS PARTIAL WEATHER PROTECTION CABIN. 1500MM LONG FORKS. NEW REAR TYRES AND SUSPENSION SEAT. VERY RECENT SERVICE, LOLER AND REPAIRS COMPLETED.

2021 FORD TRANSIT CUSTOM 300 LWB VAN 72,000 MILES DIESEL 6 SPEED 130BHP EURO 6 MOT UNTIL 22/4/25 DATE FIRST REGISTERED 16/3/2021 LAST MOT WAS A PASS WITH NO ADVISORIES , 23/4/24, MILEAGE RECORDED WAS 70,763 MILES

2015 JUNGHEINRICH TFG425 2.5 TONNE GAS FORKLIFT, 7M TRIPLE MAST, CARPET MOVING, 6249 HOURS, 2.5 TONNE LIFT, UNUSUAL RARE 7 METRE MAST WITH SIDE SHIFT, WELL MAINTAINED, IDEAL FOR CARPET MOVING AND STACKING.

2015 SCANIA P410 TIPPER 8 X 4 WHEEL APPROXIMATELY 533,000KM/311,000 MILES - SCANIA P410 TIPPER 8 X 4 WHEEL REGISTRATION BG15 EJD 2015 MODEL DATE FIRST REGISTERED 12TH JUNE 2015 DIESELS MOT VALID UNTIL 30/4/25 APPROXIMATELY 533,000 KM'S / 311,000 MILES

YILMAZ AIM 4410 ALUMINIUM MACHINING CENTRE MODEL TYPE - AIM 4410 RATED CURRENT NOMINAL AKIM - 16 A 20000 RPM 250 LT/MIN 14 KW 6 BAR 400V AC 3P PE WEIGHT - 3200KG W - 670CM / H - 220 / L - 325CM

2002 LIEBHERR 934 SCRAP HANDLER GOOD CONDITION AND WORKS WELL SOLID TYRES, HYDRAULIC HIGH RISE CAB AND LONG REACH REHANDLING ARM

1993 VOLVO A25C DUMPER (18K HOURS) 6X6 DUMPER WITH TAILGATE

2016 DAF CF370 26T DUAL TEMP FRIDGE TAIL-LIFT - APPROX 502,618 KMS / 312312 MILES - PF16UCM - 2016 DAF CF370 26T DUAL TEMP FRIDGE TAIL-LIFT APPROXIMATELY 502,618 KMS / 312312 MILES EURO 6 370BHP SINGLE SLEEPER, AUTOMATIC, DUAL TEMP, CARRIER VECTOR FRIDGE, INTERNAL DOORS ENGINE HOURS: 15790 502,618 KM'S DAF CF 370 FAN COLOUR - WHITE FUEL TYPE - DIESEL DATE REGISTERED - 4 JULY 2016 ANNUAL TEST EXPIRED ON - 30 SEPTEMBER 2023

2017 TOYOTA 2.5 TONNE DIESEL FORKLIFT 6124 HOURS 6M TRIPLE MAST SIDE SHIFT SPARE 4TH SERVICE