Surplus Equipment from Leading Aluminum Automotive Wheel Manufacturer

Revelation Auctions

Category: CNC MACHINE CENTERS

Total Lots: 171

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 171 lots

Year	Make	Model	Lot Description	Hammer Price
2018	OKUMA	LAW-V24	2018 OKUMA LAW-V24 CNC VERTICAL TURNING CENTER, WHEEL LATHE SPECIFICATIONS: POWER 75 HP MAX RPM 3,000 RPM TURNING DIA 25.98" SWING 31.5" # AXIS 4 MACHINING LENGTH 25.98" CONTROL CNC (OSP-P300LA) NOTE: FIXTURES ARE NOT INCLUDED 2018 · OKUMA · LAW-V24	🔒 Subscribe
2017	FANUC	R-2000IC	2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17832341 2017 · FANUC · R-2000IC	🔒 Subscribe
2019	FANUC	R-2000IC	2019 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E19630132 2019 · FANUC · R-2000IC	🔒 Subscribe
2018	FANUC	R-2000IC	2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18433002 2018 · FANUC · R-2000IC	🔒 Subscribe
2018	FANUC	R-2000IC	2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18334443 2018 · FANUC · R-2000IC	🔒 Subscribe
2017	FANUC	R-2000IC	2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17X31106 2017 · FANUC · R-2000IC	🔒 Subscribe
	EMCO		EMCO EMCO	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. OKUMA · LAW-2S	🔒 Subscribe
2008	GOFF	WM27.5-2-40	2008 GOFF WM27.5-2-40 SHOT BLASTER SN: 08501-50-7290 VOLTS: 460 PHASE: 3 FQ: 60 LARGEST MOTOR AMP RATING: 23 F.L. AMPS: 63 DISK AMP RATING: 100 SHORT CIR. CUR. RATING: 65K AMPS ELECTRICAL DRAWING NO: 8104557 ENCL. TYPE: NEMA 12 WITH FORCED 2008 · GOFF · WM27.5-2-40	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. OKUMA · LAW-2S	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
2001	CHIRON-WERKE	WM-05	2001 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-07 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT: 57A FUSE: 63A WEIGHT: 6520KG 2001 · CHIRON-WERKE · WM-05	🔒 Subscribe
			CAST MACHINE, HYDRAULICS, FURNACE	🔒 Subscribe
			CAST MACHINE, HYDRAULICS, FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
	GOFF	WM27.5-2-40	GOFF WM27.5-2-40 WIRE-MESH SHOT BLAST MACHINE S/N: 08501-50-7290 BELT WIDTH: 24" BLAST ENVELOPE 24"W X 13"H BLAST WHEELS HP(1): 7.5 = 30HP (12", 13.5", OR 15" DIA.) BELT SPEED: 3-20 FPM GOFF · WM27.5-2-40	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
1999	CHIRON-WERKE	WM-02	1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE S/N:499-38 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT: 29A FUSE: 35A WEIGHT: 3400KG MILL WITH 4TH AXIS (360 SWIVEL TABLE), TRAVELS X550,Y470,Z425MM, 10-FOLD TOOL CHANGER, INTERNAL TOOL SPINDLE COOLING 1999 · CHIRON-WERKE · WM-02	🔒 Subscribe
1999	CHIRON-WERKE	WM-02	1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE SN:499-37 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT: 29A FUSE: 35A WEIGHT: 3400KG MILL WITH 4TH AXIS (360 SWIVEL TABLE), TRAVELS X550,Y470,Z425MM, 10-FOLD TOOL CHANGER, INTERNAL TOOL SPINDLE COOLING 1999 · CHIRON-WERKE · WM-02	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) OKUMA · LAW-2S	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
2000	CHIRON-WERKE	WM-05	2000 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-67 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT: 57A FUSE: 63A WEIGHT: 4220KG 2000 · CHIRON-WERKE · WM-05	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT A.SMOKE AIR FILTRATION SYSTEM MODEL:12003712 - ABSOLENT SMOKE EATER MODEL:12003712 S/N: 20151898 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141535 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
	REXROTH	884468	LEAK DETECTION SYSTEM WITH REXROTH MOTOR MODEL: 884468 FRAME: 284TYZ 230/460V 60HZ S/N: 196C REXROTH · 884468	🔒 Subscribe
	CROWN	HLS284PR235B	LEAK DETECTION SYSTEM WITH CROWN TRITON MOTOR - LEAK TESTER WITH CROWN TRITON MOTOR MODEL: HLS284PR235B MOTOR 25 HP PHASE 4 230/460V FRAME: 284TC DUTY: CONT TYPE: HLS APMS: 60.6/30.3A HERTZ:60HZ RPM1775 AMB.:40C CROWN · HLS284PR235B	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141534 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN:20160449 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
2000	INDEXER PEISELER	18128	2000 INDEXER PEISELER 18128 TYPE: AWUP 200 MAXPRESSURE: 6" S/N:18128 2000 · INDEXER PEISELER · 18128	🔒 Subscribe
		SK40/BT40	SPINDLE SK40/BT40 SK40/BT40	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. OKUMA · LAW-2S	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20160169 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20120975 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5 ABSOLENT · 12003712	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe

Year	Make	Model	Description	Price
2018	OKUMA	LAW-V24	2018 OKUMA LAW-V24 CNC VERTICAL TURNING CENTER, WHEEL LATHE SPECIFICATIONS: POWER 75 HP MAX RPM 3,000 RPM TURNING DIA 25.98" SWING 31.5" # AXIS 4 MACHINING LENGTH 25.98" CONTROL CNC (OSP-P300LA) NOTE: FIXTURES ARE NOT INCLUDED	🔒 Subscribe
2017	FANUC	R-2000IC	2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17832341	🔒 Subscribe
2019	FANUC	R-2000IC	2019 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E19630132	🔒 Subscribe
2018	FANUC	R-2000IC	2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18433002	🔒 Subscribe
2018	FANUC	R-2000IC	2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18334443	🔒 Subscribe
2017	FANUC	R-2000IC	2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17X31106	🔒 Subscribe
	EMCO		EMCO	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
2008	GOFF	WM27.5-2-40	2008 GOFF WM27.5-2-40 SHOT BLASTER SN: 08501-50-7290 VOLTS: 460 PHASE: 3 FQ: 60 LARGEST MOTOR AMP RATING: 23 F.L. AMPS: 63 DISK AMP RATING: 100 SHORT CIR. CUR. RATING: 65K AMPS ELECTRICAL DRAWING NO: 8104557 ENCL. TYPE: NEMA 12 WITH FORCED	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
2001	CHIRON-WERKE	WM-05	2001 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-07 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT: 57A FUSE: 63A WEIGHT: 6520KG	🔒 Subscribe
			CAST MACHINE, HYDRAULICS, FURNACE	🔒 Subscribe
			CAST MACHINE, HYDRAULICS, FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
	GOFF	WM27.5-2-40	GOFF WM27.5-2-40 WIRE-MESH SHOT BLAST MACHINE S/N: 08501-50-7290 BELT WIDTH: 24" BLAST ENVELOPE 24"W X 13"H BLAST WHEELS HP(1): 7.5 = 30HP (12", 13.5", OR 15" DIA.) BELT SPEED: 3-20 FPM	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
1999	CHIRON-WERKE	WM-02	1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE S/N:499-38 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT: 29A FUSE: 35A WEIGHT: 3400KG MILL WITH 4TH AXIS (360 SWIVEL TABLE), TRAVELS X550,Y470,Z425MM, 10-FOLD TOOL CHANGER, INTERNAL TOOL SPINDLE COOLING	🔒 Subscribe
1999	CHIRON-WERKE	WM-02	1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE SN:499-37 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 20KVA RATED CURRENT: 29A FUSE: 35A WEIGHT: 3400KG MILL WITH 4TH AXIS (360 SWIVEL TABLE), TRAVELS X550,Y470,Z425MM, 10-FOLD TOOL CHANGER, INTERNAL TOOL SPINDLE COOLING	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS)	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
2000	CHIRON-WERKE	WM-05	2000 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-67 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLTAGE: 400V CONTROL VOLTAGE: 230/24V RATING: 40KVA RATED CURRENT: 57A FUSE: 63A WEIGHT: 4220KG	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT A.SMOKE AIR FILTRATION SYSTEM MODEL:12003712 - ABSOLENT SMOKE EATER MODEL:12003712 S/N: 20151898 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141535 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
	REXROTH	884468	LEAK DETECTION SYSTEM WITH REXROTH MOTOR MODEL: 884468 FRAME: 284TYZ 230/460V 60HZ S/N: 196C	🔒 Subscribe
	CROWN	HLS284PR235B	LEAK DETECTION SYSTEM WITH CROWN TRITON MOTOR - LEAK TESTER WITH CROWN TRITON MOTOR MODEL: HLS284PR235B MOTOR 25 HP PHASE 4 230/460V FRAME: 284TC DUTY: CONT TYPE: HLS APMS: 60.6/30.3A HERTZ:60HZ RPM1775 AMB.:40C	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141534 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN:20160449 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
2000	INDEXER PEISELER	18128	2000 INDEXER PEISELER 18128 TYPE: AWUP 200 MAXPRESSURE: 6" S/N:18128	🔒 Subscribe
		SK40/BT40	SPINDLE SK40/BT40	🔒 Subscribe
	OKUMA	LAW-2S	OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 KVA FULL LOAD CURRENT: 193.9/ 88.9 A LARGEST MOT. RATE: 186 A INTERRUP CAP: 25/15 KA DIAGRAM NO: W6200-100-748-1 RAPID TRAVERSE (IPM): 787 / 591 STANDARD POWER (HP): 75/60 SPEED RANGE (MIN1): 200~3,000 SPINDLE NOSE TYPE: JIS A2-8 MAX TURNING DIAMETER (IN): 24.80 SWING: 31.1" # AXIS: 4 POWER: 75 HP MAX RPM: 3,000 RPM TURNING DIA: 24.8" WEIGHT: 25,300 (LBS) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20160169 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
	ABSOLENT	12003712	ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20120975 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT LOAD: 8.5	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe
			LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE	🔒 Subscribe

2018 OKUMA LAW-V24

CNC MACHINE CENTERS

2018 OKUMA LAW-V24 CNC VERTICAL TURNING CENTER, WHEEL LATHE SPECIFICATIONS: POWER 75 HP MAX RPM 3,00...

Hammer Price: 🔒

2017 FANUC R-2000IC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17832341...

Hammer Price: 🔒

2019 FANUC R-2000IC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

2019 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E19630132...

Hammer Price: 🔒

2018 FANUC R-2000IC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18433002...

Hammer Price: 🔒

2018 FANUC R-2000IC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

2018 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2612-B122 S/N: E18334443...

Hammer Price: 🔒

2017 FANUC R-2000IC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

2017 FANUC R-2000IC PARTS LOADING ROBOT WITH R-30IB PLUS CONTROL TYPE: A05B-2610-B022 S/N: E17X31106...

Hammer Price: 🔒

EMCO

MISC

EMCO...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PHASE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY:...

Hammer Price: 🔒

2008 GOFF WM27.5-2-40

SURFACE FINISHING EQUIPMENT

2008 GOFF WM27.5-2-40 SHOT BLASTER SN: 08501-50-7290 VOLTS: 460 PHASE: 3 FQ: 60 LARGEST MOTOR AMP RA...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY:...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY:...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY:...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

2001 CHIRON-WERKE WM-05

CNC MACHINE CENTERS

2001 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-07 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOL...

Hammer Price: 🔒

MISC

CAST MACHINE, HYDRAULICS, FURNACE...

Hammer Price: 🔒

MISC

CAST MACHINE, HYDRAULICS, FURNACE...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING...

Hammer Price: 🔒

GOFF WM27.5-2-40

SURFACE FINISHING EQUIPMENT

GOFF WM27.5-2-40 WIRE-MESH SHOT BLAST MACHINE S/N: 08501-50-7290 BELT WIDTH: 24" BLAST ENVELOPE 24"W...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS, FURNACE, AND DIE COOLING...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

1999 CHIRON-WERKE WM-02

CNC MACHINE CENTERS

1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE S/N:499-38 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOL...

Hammer Price: 🔒

1999 CHIRON-WERKE WM-02

CNC MACHINE CENTERS

1999 CHIRON-WERKE WM-02 CNC MILLING MACHINE SN:499-37 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOLT...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING CENTER SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY: 73.9 K...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

2000 CHIRON-WERKE WM-05

CNC MACHINE CENTERS

2000 CHIRON-WERKE WM-05 CNC MILLING MACHINE S/N:153-67 KIND OF CURRENT: 3/N/PE - 50/60HZ WORKING VOL...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT A.SMOKE AIR FILTRATION SYSTEM MODEL:12003712 - ABSOLENT SMOKE EATER MODEL:12003712 S/N: 201...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141535 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 O...

Hammer Price: 🔒

REXROTH 884468

MISC

LEAK DETECTION SYSTEM WITH REXROTH MOTOR MODEL: 884468 FRAME: 284TYZ 230/460V 60HZ S/N: 196C...

Hammer Price: 🔒

CROWN HLS284PR235B

MISC

LEAK DETECTION SYSTEM WITH CROWN TRITON MOTOR - LEAK TESTER WITH CROWN TRITON MOTOR MODEL: HLS284PR2...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN: 20141534 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 O...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT 12003712 A.SMOKE AIR FILTRATION SYSTEM SN:20160449 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OU...

Hammer Price: 🔒

2000 INDEXER PEISELER 18128

MISC

2000 INDEXER PEISELER 18128 TYPE: AWUP 200 MAXPRESSURE: 6" S/N:18128...

Hammer Price: 🔒

SK40/BT40

MISC

SPINDLE SK40/BT40...

Hammer Price: 🔒

OKUMA LAW-2S

CNC MACHINE CENTERS

OKUMA LAW-2S CNC TURNING LATHE MACHINE SUPPLY VOLTAGE: 220/480V PAHSE: 3P FREQ: 60HZ RATED CAPACITY:...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20160169 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT L...

Hammer Price: 🔒

ABSOLENT 12003712

DUST COLLECTION EQUIPMENT

ABSOLENT 12003712 AIR FILTRATION SYSTEM S/N: 20120975 VOLTAGE: 440-480 FREQ: 60 CURRENT: 14 OUTPUT L...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

DIE CASTING & FORGING EQUIPMENT

LOW PRESSURE DIE CASTING MACHINE WITH HYDRAULIC PRESS AND FURNACE...

Hammer Price: 🔒

1 2 3 4 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Surplus Equipment from Leading Aluminum Automotive Wheel Manufacturer

Save to Project Folder

Print Options

Save to Project Folder