HUGE 6 DAY SALE Major Offshore Oil Gas Facility Closure DAY 3

SECO 1.25 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

SECO 1.25 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

INDEXABLE TURNING TOOL HOLDERS

STATIC TOOL HOLDER BLOCKS

1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

SECO 1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

SECO 1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

1.5 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

1.25 INCH SHANK INDEXABLE TURNING TOOL HOLDERS

INDEXABLE TURNING TOOL HOLDERS

2023 FIVES GIDDINGS & LEWIS VTC-1600 VERTICAL TURNING CENTER SN: 524-0155-25 SPECIFICATIONS: MAIN SPINDLE TURNING DIAMETER MAX: 78.7" MAIN SPINDLE TURNING LENGTH MAX: 59.1" MAIN SPINDLE CHUCK DIAMETER: 49.5" MAIN SPINDLE CHUCK DIAMETER OPT: 63" MAIN SPINDLE MAX SWING: 78.7" X-AXIS TRAVEL: 47.6" Z-AXIS TRAVEL: 68.9" X-AXIS RAPID TRAVERSE: 787 IPM Z-AXIS RAPID TRAVERSE: 787 IPM RAM SIZE: 9.84" X 9.84" FEED THRUST AVAILABLE, X-AXIS: 7,600 LBS FEED THRUST AVAILABLE, Z-AXIS DOWN: 7,600 LBS FEED THRUST AVAILABLE, Z-AXIS UP: 5,000 LBS RIGHT HAND HEAD W/ INTEGRATED LIVE SPINDLE AC DRIVE MOTOR S6-40% 44 HP AC DRIVE MOTOR CONTINUOUS: 29 HP TWO SPEED GEARBOX SPINDLE SPEED: 4,000 RPM C-AXIS POSITIONING/CONTOURING TABLE NUMBER OF POSITIONS 360,000 RAPID TRAVERSE RATE 10 RPM MAXIMUM CUTTING FEEDRATE 5 RPM TORQUE AVAILABLE 8,100 NM TABLE BASE TWO SPEED TABLE DRIVE TRANSMISSION 4.0:1 GEAR RATIO AC DUAL DRIVE MOTORS DRIVING POWER (S6-40 RATING): 121 HP, (CONT. RATING) 99 HP TABLE/CHUCK SPEED: 1-400 RPM LOW RANGE: 1-110 RPM HIGH RANGE: 1-400 RPM CONSTANT TORQUE: 18,130 FT/LB LOW RANGE: 1-28.8 RPM HIGH RANGE: 1-115 RPM TABLE BEARINGS ASSEMBLED INTO MODULAR UNIT AND PRELOADED FOR SUPERIOR STIFFNESS HEAVY DUTY THRUST BEARING OD - AXIAL LOAD: 25" TAPER ROLLER BEARING OD - RADIAL LOAD: 16.5" THRUST BEARING LOAD CAPACITY AT 33 1/3 RPM: 181,200 LBS TABLE LOAD CAPACITY: 33,000 LBS SHUTTLE SYSTEM MAXIMUM PALLET SWING: 78.4" MAXIMUM PALLET SHUTTLE CAPACITY: 15,400 LBS PALLET EXCHANGE TIME (APPROX.): 120 SEC Y-AXIS ATTACHMENT MACHINING RANGE OF Y FEATURES LIMITED TO +/- 90 DEGREES MAXIMUM POWER (CONT): 29 HP MAXIMUM POWER (S6-40%): 44 HP MAXIMUM TORQUE: 670 FT/LB MAXIMUM SPEED: 2200 RPM MAXIMUM HEAD ROTATION RATE: 8.7 RPM LIVE SPINDLE TOOLING TAPER: CAPTO C8 ATTACHMENT TRAVEL LIMITED TO X-AXIS TRAVEL RIGHT OF CENTER AUTOMATIC ATTACHMENT PICK-UP FROM TOOL CHANGER OR TOOL DRAWER AUTOMATIC TOOL CHANGING INTO ATTACHMENT VIA TOOL DRAWER OR CHAIN MAGAZINE COOLANT THRU NOZZLES UP TO 16 BAR COOLANT THRU TOOL UP TO 70 BAR EQUIPPED WITH: RENISHAW TOOL PROBE MIST COLLECTOR HIGH PRESSURE COOLANT SYSTEM DUAL FILTER AUTO CROSSOVER FOR HIGH PRESSURE COOLANT SYSTEM TANK MOUNTED OIL SKIMMER LARGE COOLANT TANK CAPACITY: 475 GAL LEAF TYPE CHIP CONVEYOR FULL MACHINE ENCLOSURE W/ OPEN TOP FANUC 30/31I-B CONTROL

2009 BULLARD 124" CNC VTL, REFURBISHED WITH GE FANUC 30I-A5T CONTROL - BULLARD DUAL RAM CNC VTL, REFURBISHED WITH GE FANUC 30I-A5T 2 PATHS CONTROL S/N: 33213 SPECIFICATIONS: BULLARD 124" VTL RETROFIT MACHINE DATA SHEET: GE FANUC 30I-A5T 2 PATHS CONTROL (X1-Z1, X2-Z2) CHUCK SIZE: 108" SWING: 124" CLEARANCE UNDER RAIL: 127" CLEARANCE UNDER RAM TOOL: 118" SPINDLE MOTOR POWER: 125 HP LOW GEAR MAX SPEED (M41): 25 RPM HIGH GEAR MAX SPEED (M42): 100 RPM X1 AT HOME POSITION: -152.00" DIA Z1 AND Z2 AT HOME POSITION: 0.0" X2 AT HOME POSITION: 152.00" DIA HEAD 1 (X1-Z1) TURRET: 4 POSITION BI DIRECTIONAL INDEXING HEAD 2 HAS NO TURRET ONLY TOOL HOLDER BLOCK. X1 TRAVELS 153.5" TOOL PASSES CENTER OF CHUCK. X2 TRAVELS 153.5" TOOL PASSES CENTER OF CHUCK. Z1 AND Z2 TRAVEL IS 88.75" RAIL ELEVATION IS AT THE AXIS HOME POSITIONS AND CAN BE SET BETWEEN LIMITS AT ANY HEIGHT. X1 X2 MAX RAPID SPEED 300 "/MIN. Z1 AND Z2 MAX RAPID SPEED 200 "/MIN. MAX CUTTING FEED RATE 200 "/MIN. EQUIPPED WITH: FANUC 31I-AB CNC CONTROL MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY

FARRELL CNC SERIES 1200/1400 VERTICAL BORING MILL, REFURBISHED WITH FANUC CONTROL - FARRELL CNC SERIES 1200/1400 VERTICAL BORING MILL AND TURNING LATHE, VTL TOOLING, JAWS, REFURBISHED WITH FANUC CONTROL SN: SPECIFICATIONS: MAXIMUM SWING 22' TABLE DIAMETER 12' TABLE BEARING CAPACITY (UNIFORMLY DISTRIBUTED) 125 TONS TABLE DRIVE MOTOR 100 HP TABLET SPEED .6-79 RPM TABLE DRIVE GEAR 15 HP/RPM HEIGHT 8' RAIL RAM TRAVEL (VERTICAL) 60" RAIL RAM SECTION 10" SQ. MINIMUM BORE RAM WILL ENTER 14.5" MINIMUM DISTANCE BETWEEN RAM CENTERS 41.5" RAM CENTER PAST TABLE CENTER 7" RAM AND SADDLE FEEDS .10-150 IPM TOOL HOLDER SHANK SIZE 2" SQ. TOOL HOLDER LENGTH 10" EQUIPPED WITH: FANUC SERIES 18I-T CNC CONTROL

1983 INGERSOLL 48" 4 AXIS CNC VTL, REFURBISHED WITH FANUC CONTROL IN 1999 SN: 25467 SPECIFICATIONS: SPINDLE POWER: 125 HP DC SPINDLE MOTOR CHUCK SIZE: 48 DIA, 6 JAWS, HYDRAULIC OPERATED MAXIMUM SWING: 69.0 DIA CLEARANCE UNDER RAIL: 57.0 CLEARANCE UNDER TURRET: 44.0 2 RAM TURRETS: 16 DIA DISC, 6 POSITIONS, ID/OD CLAMPING EACH X1, X2 TRAVEL: 24.2.0 EACH RAM CROSSES C/L TO THE O/D OF CHUCK Z1, Z2 TRAVEL: 42.0 RAPID TRAVEL: 200/MIN. MAX FEED RATE: 200/MIN. EQUIPPED WITH: FANUC 18ITT-B CNC CONTROL RETROFITTED AND REFURBISHED IN DEC 1999 MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED.

V BLOCKS AND FIXTURING HARDWARE

12-IN BISON CHUCK FIXTURE

24-IN CUSHMAN 4 JAW CHUCK

V BLOCKS WITH CHAIN CLAMPS

24-IN ATLAS 4 JAW CHUCK

ROHM 32-IN 3 JAW CHUCK

16 INCH BISON 4 JAW CHUCK

16-IN BISON 4 JAW CHUCK

1988 GIDDINGS AND LEWIS AMCA MC-60 B 6" CNC HORIZONTAL BORING MILL, 8 PALLET SHUTTLE S/N: 450-193-88 SPECIFICATIONS: YEAR NEW: 1988 (MACHINE HAS BEEN REFURBISHED) TABLE SIZE: 31" X 31" X TRAVEL: 62" Y TRAVEL: 70" Z TRAVEL: 42" BAR EXT: 40 4TH AXIS DEGREE: 0.001 NUMBER OF TOOLS: 120 NUMBER OF PALLETS: 8 CONTROL: 8000-A MAX RPM: 2030 MAX TABLE LOAD: 10,000 LBS EQUIPPED WITH: AUTO TOOL CHANGER CHIP CONVEYOR FULL 4TH AXIS DEGREE: 0.001 OPTIONS: FACING HEAD: 7.5" TRAVEL, 300 MAX. RPM, POSITIONING ONLY (4TH AXIS) MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED.

1998 GIDDINGS AND LEWIS MC-60 B 6" CNC HORIZONTAL BORING MILL, DUAL 48" X 48" TABLES S/N: 450-388-98 SPECIFICATIONS: TABLE SIZE: 48 X 48 X TRAVEL: 72" Y TRAVEL: 78" Z TRAVEL: 108" BAR EXT: 36 NUMBER OF TOOLS: 40 NUMBER OF PALLETS: 2 HP: 50 MAX RPM: 2500 MAX TABLE LOAD: 25,000 EQUIPPED WITH: 4TH AXIS DEGREE: 0.001 CHIP CONVEYOR THROUGH SPINDLE COOLANT: YES CONTROL: 8000B MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

1980 GIDDINGS AND LEWIS G60 RTX 6 CNC HORIZONTAL BORING MILL TABLE SIZE: 48" X 72" X TRAVEL: 72" Y TRAVEL: 62" Z TRAVEL: 48" BAR EXT: 42 NUMBER OF TOOLS: 40 MAX RPM: 1118 MAX TABLE LOAD: 25,000 CONTROL: 800M AUTO TOOL CHANGER 4TH AXIS DEGREE: 0.001 CHIP CONVEYOR POSITIONING ONLY (4TH AXIS) MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED. S/N: 450-69-80

24-IN ATLAS 4 JAW CHUCK

2005 GIDDINGS AND LEWIS-FRASER G60-T CNC 6" HORIZONTAL BORING MILL S/N: 450-1074 SPECIFICATIONS: TABLE SIZE: 72X144 X TRAVEL: 144" Y TRAVEL: 96" Z TRAVEL: 108" BAR EXT: 48 THROUGH SPINDLE COOLANT: NO 4TH AXIS DEGREE: 0.001 HP: 40 CONTROL: G&L 8000B MAX RPM: 1118 MAX TABLE LOAD: 40,000+ EQUIPPED WITH: CNC 8000B CONTROL 2005 HOLLOW SPINDLE ROTARY TABLE WITH INDEPENDENT CONTROL ROTARY TABLE 60" X 96" STEADY RESTS MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED.

CHAINS AND WORKHOLDING FIXTURES

GIDDINGS AND LEWIS 48" 2 AXIS CNC VTL, WITH ATC [SERIAL NUMBER] SN: 512-97-79 SPECIFICATIONS: TABLE: 48" TABLE SIZE 48" MAXIMUM SWING 60" MAXIMUM FACING CAPACITY 60" MAXIMUM HEIGHT UNDER RAIL 60" MAXIMUM HEIGHT UNDER CROSS RAIL 48" VERTICAL TRAVEL OF RAIL 36" VERTICAL RAM STROKE 42" EQUIPPED WITH: GIDDINGS & LEWIS 800 CNC CONTROL ALL AVAILABLE RELATED TOOLING 12 POSITION AUTO TOOL CHANGER

V-BLOCK ASSORTMENT

GIDDINGS AND LEWIS MC-60 6" CNC HORIZONTAL BORING MILL TABLE SIZE: 48 X 48 X TRAVEL: 72" Y TRAVEL: 72" Z TRAVEL: 72" BAR EXT: 48 4TH AXIS DEGREE: 0.001 NUMBER OF TOOLS: 100 CONTROL: G&L 8000 MAX TABLE LOAD: 25,000 EQUIPPED WITH: CHIP CONVEYOR AUTOMATIC TOOL CHANGER MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED. S/N: 450-15-78

GIDDINGS AND LEWIS FRASER G50 RTX 5 CNC HORIZONTAL BORING MILL SPECIFICATIONS: TABLE SIZE: 48 X 48 X TRAVEL: 60" Y TRAVEL: 62" Z TRAVEL: 27" BAR EXT: 35 4TH AXIS DEGREE: 0.001 NUMBER OF TOOLS: 60 NUMBER OF PALLETS: 1 MAX RPM: 1118 MAX TABLE LOAD: 25,000 EQUIPPED WITH: CHIP CONVEYOR B AXIS ROTARY OPTIONS: POSITIONING ONLY (4TH AXIS) CONTROL: 800B SN: 50-1362-79 SN: 450-1043-1386 MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY

TOSHIBA SHIBAURA MODEL BT-10BR1P TABLE TYPE HORIZONTAL BORING MILL SN: 163663 SPECIFICATIONS: TABLE SIZE: 49.2" X 44.1" TABLE CROSS TRAVEL: 55.4" TABLE LONGITUDINAL TRAVEL: 44.2" HEADSTOCK VERTICAL TRAVEL: 49.1" SPINDLE TRAVEL: 28" SPINDLE DIAMETER: 3.94" SPINDLE TAPER: 50 SPINDLE SPEEDS: 20 - 1000 RPM FEEDS: .0009 - .15 IPR MAIN MOTOR: 15 HP EQUIPPED WITH: NEWALL DRO

36-IN 4 JAW LARGE BORE CHUCK

16-IN BISON 4 JAW CHUCK

ROHM THREE JAW CHUCK

1976 GIDDINGS AND LEWIS G50T 5 CNC HORIZONTAL BORING MILL S/N: 411-25-76. SPECIFICATIONS: TABLE SIZE: 48 X 98 X TRAVEL: 86" Y TRAVEL: 82" Z TRAVEL: 45" BAR EXT: 36 NUMBER OF TOOLS: 1 NUMBER OF PALLETS: 1 HP: 30 MAX RPM: 1118 MAX TABLE LOAD: 25,000 EQUIPPED WITH: THROUGH SPINDLE COOLANT: YES CONTROL: 8000B OPTIONS: RADIAL MILLING ADD-ON MANUAL TABLE: ( 48" X 72") .5 DEG. INCREMENTS ROTARY INDEXER SHOWN ON TABLE. MACHINE HAS BEEN PROFESSIONALLY REBUILT AND REFURBISHED.

(4) 18X14 TOMBSTONES

CARBIDE INSERTS, INCLUDING CARBOLINE TOOL FLO, APPEAR NEW

32-IN LARGE BORE 4 JAW CHUCK

24 INCH 4 JAW CHUCK

26-IN 3 JAW CHUCK WITH JAWS

16 INCH BISON 4 JAW CHUCK FIXTURE

CARBIDE INSERTS, SECO, SANDVIK AND MORE, APPEAR NEW

LONG LENGTH INDEXABLE BORING BARS

SCALES, 12" MOST STARRETT

BICKFORD / GIDDINGS AND LEWIS 25VS E CNC 4 AXIS VERTICAL MACHINING CENTER - BICKFORD / GIDDINGS AND LEWIS 25VS E CNC VERTICAL MACHINING CENTER SN: 924-25-87 SPECIFICATIONS: X 52" Y 40" Z 44" RPM 40 RPM # ATC 40 TABLE-W 40" TABLE-L 48" CONTROL CNC (G & L NUMERIPATH 8000A) EQUIPPED WITH: 40" X 80" TABLE 20" 4 JAW CHUCK 3 STEADY RESTS TAILSTOCK