MultiLocation Packaging and Processing Equipment Consignment Auction Contact M Davis Group to Sell YOUR Surplus
Category: CHEMICAL PROCESSING EQUIPMENT
Total Lots:
285
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
BREAD EXTRUDER WITH (2) AUGERS, APROX. 26" L X 1/2" H OUTLET, LADDER, PLATFORM WITH RAIL, (2) 1/40 HP MOTORS, 115 V, 1280/1380 RPM, WORKING CONDITION
|
🔒 Subscribe | |||
|
|
RIBBON BLENDER 85 CUFT (APPROX.) 12" SQUARE BOTTOM DISCHARGE, ON 30" LEGS; GEAR BOX AND DRIVE SHAFT, MISSING MOTOR
|
🔒 Subscribe | |||
|
|
1998 | CM CASADEI MARINO SNC | F12RV |
1998 CM CASADEI MARINO SNC F12RV KNEADING FORK MACHINE, 400 VOLTS, 3 PHASE - TANK CAPACITY APRX. 120LT (31.7006 GAL.); FLOUR CAPACITY 60KG (132.27 LBS.), KNEADING CAPACITY 84KG (185.188 LBS.); E-STOP, (4) CASTERS, APROX. INSIDE DIMENSIONS 30" DIAMETER X 11" DEEP, OVERALL DIMENSIONS APROX. 48" L X 34" W X 48-1/2" H (NOTE: NONWORKING CONDITION)
|
🔒 Subscribe |
|
|
2008 | TAWI | PROTEMA 120 |
2008 TAWI PROTEMA 120 MOBILE ELECTRIC FILM LIFT S/N: 1202411 WITH CHARGING SYSTEM, HAND-HELD REMOTE CONTROL, MAX. WEIGHT 265 LBS. OR 20 KG, 120 V, OVERALL DIMENSIONS APROX. 35" L X 23" W X 100" H (WORKING CONDITION)
|
🔒 Subscribe |
|
|
BALDOR |
APROX. 11.5" INCLINE CONVEYOR, WITH BALDOR 5 HP MOTOR, 208-230/460 V, 1755 RPM, 3 PHASE, CONTROL PANEL, BELT DIMENSIONS APROX. 119" L X 16" W, OVERALL DIMENSIONS APROX. 138" L X 29" W X 37" H (WORKING CONDITION)
|
🔒 Subscribe | ||
|
|
BUSCH | 3 HP |
BUSCH 3 HP VACUUM PUMP, 230/460 V, 1710 RPM, 3 PHASE, OVERALL DIMENSIONS APROX. 28" L X 15" W X 12" H (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe | |
|
|
APROX. 300 GAL. S/S TANK, SINGLE SHELL, CONE BOTTOM, 10" OUTLET, (4) 10" CASTERS, INSIDE DIMENSIONS APROX. 46" DIA. X 30" DEEP, OVERALL DIMENSIONS APROX. 49" W X 60" H, S/N: 3398
|
🔒 Subscribe | |||
|
|
TRI-HOMO | COLLOID MILL |
TRI-HOMO COLLOID MILL, STAINLESS STEEL WET PARTS, 30HP 230-460V DRIVE
|
🔒 Subscribe | |
|
|
STAINLESS STEEL SONILATOR WITH 25HP MOTOR, MOTOR CONTROLLER AND VFD (VFD HAS BROKEN FACE PLATE)
|
🔒 Subscribe | |||
|
|
VIKING PUMP | F4724 |
WASHDOWN VIKING PUMP MODEL F4724 STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP STAINLESS STEEL MOTOR, STAINLESS STEEL GUARD ON COUPLER, AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | F4724 |
VIKING PUMP F4724 WASHDOWN STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP STAINLESS STEEL MOTOR, STAINLESS STEEL GUARD ON COUPLER, AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | F4724 |
VIKING PUMP F4724 WASHDOWN PUMP STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP STAINLESS STEEL MOTOR, STAINLESS STEEL GUARD ON COUPLER, AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
3M | 2995 |
3M 2995 TAPER ADJUSTABLE CASE SEALER S/N: 7844 WITH 4-CASTERS, 115 V, OVERALL DIMENSIONS APROX. 43-1/2" L X 31" W X 70" H (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe | |
|
|
2009 | 3M | 200A |
2009 3M 200A TAPER ADJUSTABLE CASE SEALER S/N: 50072 WITH 4-CASTERS, 115 V, SINGLE PHASE, OVERALL DIMENSIONS APROX. 36" L X 31" W X 78" H (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM HP3 MOTOR, STAINLESS STEEL GUARD ON COUPLER, 3" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | H4125 |
VIKING PUMP H4125 STAINLESS STEEL WET PARTS ON BASE, SPEED ADJUSTABLE GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
WAUKESHA | SIZE 55 |
WAUKESHA SIZE 55 PORTABLE PUMP WITH 3-1/2" BEVEL SEAT INLET/OUTLET, FEATHER PICKER 3 HP MOTOR, 230/460 V, 1725 RPM, 3 PHASE, FRAME 145T, OVERALL DIMENSIONS APROX. 22-1/2" L X 20-1/4" W X 45" H (WORKING CONDITION AS OF 2/15/2022)
|
🔒 Subscribe | |
|
|
3M | 2995 |
3M 2995 TAPER ADJUSTABLE CASE SEALER S/N: 7844 WITH 4-CASTERS, 115 V, OVERALL DIMENSIONS APROX. 43-1/2" L X 31" W X 70" H (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe | |
|
|
HOOVER SOLUTIONS | 507605 |
HOOVER SOLUTIONS 507605 500 GAL. OIL TANK S/N: 235475 WITH GUARDED SIDES AROUND TANK, FORKLIFT PORTS ON BOTTOM, 1-1/2" THU-FLO VALVE, 2" TO 1-1/2" REDUCER INLET; INSIDE DIMENSIONS APROX. 49" L X 43" W X 66-1/2" DEEP; OVERALL DIMENSIONS APROX. 56" L X 51" W X 83" H
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
SCALE BOX CHECK WEIGHTIER AND PACKAGING CONVEYOR WITH 1/2 HP MOTOR, 230 V, 1725 RPM, 3 PHASE; ALLEN BRADLEY PLC CONTROLS, 6-ADJUSTABLE LOCKABLE CASTERS, NUMEROUS BOX PROXIMITY SENSORS, BOX INFEED GUIDES, STAINLESS FRAME, PRODUCT BLUE CONVEYOR APROX. 47-1/2" L X 12" W; BOX INFEED CONVEYOR APROX. 73-1/2" L X 12" W, OVERALL DIMENSIONS APROX. 10' L X 5' W X 52" H (WORKING CONDITION AS OF MARCH 2022)
|
🔒 Subscribe | |||
|
|
2005 |
2005 SHELL & TUBE HEAT EXCHANGER SHELL SIDE: 150 PSIG @ 375 DEGREE F, TUBE SIDE: 150 PSIG@ 375 DEGREE F, SHELL SIDE: -20 DEGREE F @ 150 PSIG, TUBE SIDE - 20 DEGREE F @ PSIG, HELD PRESSURE, OVERALL DIMENSIONS 50-1/2" L X 17-1/2" W (WORKING CONDITION AS OF JUNE 2022) S/N: 7740
|
🔒 Subscribe | ||
|
|
1999 |
1999 SHELL & TUBE HEAT EXCHANGER SHELL SIDE: 150 PSIG @ 375 DEGREE F, TUBE SIDE: 150 PSIG@ 375 DEGREE F, SHELL SIDE: -20 DEGREE F @ 150 PSIG, TUBE SIDE - 20 DEGREE F @ PSIG,3" IN/OUTLET, HELD PRESSURE, OVERALL DIMENSIONS 72-1/2" L X 12-1-2" W (WORKING CONDITION AS OF JUNE 2022) S/N: 4460
|
🔒 Subscribe | ||
|
|
RELIANCE |
20 HP PUMP WITH RELIANCE MOTOR, 230/460 V, 1760 RPM, 3 PHASE AND 4" TRI-CLAMP IN/OUTLET, OVERALL DIMENSIONS APROX. 75" L X 36" W X 43" H, (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe | ||
|
|
BALDOR |
APROX. 6' COP TANK (CLEAN OUT OF PLACE TANK) WITH BALDOR 5 HP MOTOR, 230/460 V, 3500 RPM, 3 PHASE AND 2-1/2" 3-WAY VALVE, INSIDE DIMENSIONS APROX. 75" L X 19-1/2" W X 17" DEEP, OVERALL DIMENSIONS APROX. 79" L X 29" W X 41-1/2" H (WORKING CONDITION AS OF JUNE 2022)
|
🔒 Subscribe | ||
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, VARIABLE FREQUENCY DRIVE (VFD) INSTALLED WITH SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, VARIABLE FREQUENCY DRIVE (VFD) INSTALLED WITH GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 3HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
WASHDOWN VIKING PUMP MODEL KK124A ON BASE WITH NORD GEAR BOX AND DUAL VOLTAGE (230/360) 1745 RPM 1HP SS MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A ON BASE WITH SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
2004 | HX-U-15-4-X72 |
2004 HX-U-15-4-X72 2-TANK CIP SKID CONSISTS OF (2) 150 GAL. SINGLE SHELL TANK WITH WING TOP COVERS,-(1) TANK IS NEW AND (1) TANK IS USED, 3" OVERFLOW PIPES, 5 HP PUMP, 230/460 V, 3450 RPM, 3 PHASE, SHELL AND TUBE HEAT EXCHANGER, S/N 1064, SHELL SIDE - MAWP 150 PSIG AT 400 DEGREE F; MAWP 150 PSI AT -20 MDMFT; TUBE SIDE MAWP 150 PSIG AT 400 DEGREE F; MAWP 150 PSIG AT -20 MDMTF, CIP RETURN SPRING CHECK VALVE, 3" ACTUATED BLL VALVE, INSIDE DIMENSIONS APROX. 30" DIA. X 39" DEEP, OVERALL DIMENSIONIS APROX. 56" L X 106" W X 73" H (SOME ADDITIONAL PLUMBING REQUIRED) (NEW/REFURBISHED)
|
🔒 Subscribe | |
|
|
APROX. 250 GAL. S/S KETTLE WITH AGITATOR, 1/2 HP MOTOR, 230/460 V, 1725 RPM, 3 PHASE; PADDLE, STEAM HEAT (NO TAG), HAS SOME IMPERFECTION ON THE INSIDE, INSIDE DIMENSIONS APROX. 48" DIA. X 29" DEEP, OVERALL DIMENSIONS APROX. 53" W X 64" H (WORKING CONDITION - HELD PRESSURE AS OF 5/24/22)
|
🔒 Subscribe | |||
|
|
VIKING PUMP | KK124A |
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL GUARD ON COUPLER, 2" INLET/OUTLET AND ON/OFF SWITCH ON BASE.
|
🔒 Subscribe | |
|
|
2003 | UV2100-B |
2003 ULTRA VACUUM SEALER MODEL UV2100-B DOUBLE CHAMBER, 7.5 HP MOTOR, 240 V, 1745 RPM, 3 PHASE, OVERALL DIMENSIONS APROX. 77" L X 42" W X 41" H, S/N: 3764
|
🔒 Subscribe | |
|
|
1998 | 600A |
1998 600A VACUUM SEALER WITH DOUBLE CHAMBER, 208 V, 3 PHASE, CONTROL PANEL, HEATING ELEMENTS, SWIVEL CHAMBERS, PLASTIC BLOCKS, INSIDE DIMENSIONS APROX. 25-3/4" L X 19-1/2" W, OVERALL DIMENSIONS APROX. 67-1/2" L X 35" W X 43" H, (WORKING CONDITION OF 2-15-22) S/N: 03067
|
🔒 Subscribe | |
|
|
DRUM WARMING INSULATED HEAVY DUTY SITS ON THE FLOOR. APPROX. 5 FT BY 12 FT BY 7FT.
|
🔒 Subscribe | |||
|
|
EUSA |
30 GALLON STAINLESS STEEL WATER JACKETED WITH ELECTRIC HEATER FOR JACKET AND SCRAPW SURFACE MIXER
|
🔒 Subscribe | ||
|
|
1100 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK-72" DIAMETER, 72" STRAIGHT SIDE, TOP ENTERING SCRAPE SURFACE MIXER WITH MOTOR AND GEAR BOX INSTALLED ABOVE. FLAT TOP AND BOTTOM WITH VARIOUS OPENINGS ON TOP AND 3" BOTTOM OUTLET
|
🔒 Subscribe | |||
|
|
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL
|
🔒 Subscribe | |||
|
|
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL
|
🔒 Subscribe | |||
|
|
800 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK- 5 FT DIAMETER, 6 FT STRAIGHT SIDE
|
🔒 Subscribe | |||
|
|
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL (7) TRAY CARTS - APROX. 26 L X 20 W X 70 TALL
|
🔒 Subscribe | |||
|
|
1000 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK-70" DIAMETER, 60" STRAIGHT SIDE. FLAT TOP AND BOTTOM WITH VARIOUS OPENINGS ON TOP AND 3" BOTTOM OUTLET
|
🔒 Subscribe |
BREAD EXTRUDER WITH (2) AUGERS, APROX. 26" L X 1/2" H OUTLET, LADDER, PLATFORM WITH RAIL, (2) 1/40 H
RIBBON BLENDER 85 CUFT (APPROX.) 12" SQUARE BOTTOM DISCHARGE, ON 30" LEGS; GEAR BOX AND DRIVE SHAFT,
1998 CM CASADEI MARINO SNC F12RV
1998 CM CASADEI MARINO SNC F12RV KNEADING FORK MACHINE, 400 VOLTS, 3 PHASE - TANK CAPACITY APRX. 120...
2008 TAWI PROTEMA 120
2008 TAWI PROTEMA 120 MOBILE ELECTRIC FILM LIFT S/N: 1202411 WITH CHARGING SYSTEM, HAND-HELD REMOTE ...
BALDOR
APROX. 11.5" INCLINE CONVEYOR, WITH BALDOR 5 HP MOTOR, 208-230/460 V, 1755 RPM, 3 PHASE, CONTROL PAN...
BUSCH 3 HP
BUSCH 3 HP VACUUM PUMP, 230/460 V, 1710 RPM, 3 PHASE, OVERALL DIMENSIONS APROX. 28" L X 15" W X 12" ...
APROX. 300 GAL. S/S TANK, SINGLE SHELL, CONE BOTTOM, 10" OUTLET, (4) 10" CASTERS, INSIDE DIMENSIONS
TRI-HOMO COLLOID MILL
TRI-HOMO COLLOID MILL, STAINLESS STEEL WET PARTS, 30HP 230-460V DRIVE...
STAINLESS STEEL SONILATOR WITH 25HP MOTOR, MOTOR CONTROLLER AND VFD (VFD HAS BROKEN FACE PLATE)
VIKING PUMP F4724
WASHDOWN VIKING PUMP MODEL F4724 STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/3...
VIKING PUMP F4724
VIKING PUMP F4724 WASHDOWN STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 17...
VIKING PUMP F4724
VIKING PUMP F4724 WASHDOWN PUMP STAINLESS STEEL WET PARTS ON BASE, GEAR BOX AND DUAL VOLTAGE (230/36...
3M 2995
3M 2995 TAPER ADJUSTABLE CASE SEALER S/N: 7844 WITH 4-CASTERS, 115 V, OVERALL DIMENSIONS APROX. 43-1...
2009 3M 200A
2009 3M 200A TAPER ADJUSTABLE CASE SEALER S/N: 50072 WITH 4-CASTERS, 115 V, SINGLE PHASE, OVERALL DI...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP H4125
VIKING PUMP H4125 STAINLESS STEEL WET PARTS ON BASE, SPEED ADJUSTABLE GEAR BOX AND DUAL VOLTAGE (230...
WAUKESHA SIZE 55
WAUKESHA SIZE 55 PORTABLE PUMP WITH 3-1/2" BEVEL SEAT INLET/OUTLET, FEATHER PICKER 3 HP MOTOR, 230/4...
3M 2995
3M 2995 TAPER ADJUSTABLE CASE SEALER S/N: 7844 WITH 4-CASTERS, 115 V, OVERALL DIMENSIONS APROX. 43-1...
HOOVER SOLUTIONS 507605
HOOVER SOLUTIONS 507605 500 GAL. OIL TANK S/N: 235475 WITH GUARDED SIDES AROUND TANK, FORKLIFT PORTS...
VIKING PUMP KK124A
VIKING PUMP KK124A ON BASE, GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLESS STEEL ...
SCALE BOX CHECK WEIGHTIER AND PACKAGING CONVEYOR WITH 1/2 HP MOTOR, 230 V, 1725 RPM, 3 PHASE; ALLEN
2005
2005 SHELL & TUBE HEAT EXCHANGER SHELL SIDE: 150 PSIG @ 375 DEGREE F, TUBE SIDE: 150 PSIG@ 375 DEGRE...
1999
1999 SHELL & TUBE HEAT EXCHANGER SHELL SIDE: 150 PSIG @ 375 DEGREE F, TUBE SIDE: 150 PSIG@ 375 DEGRE...
RELIANCE
20 HP PUMP WITH RELIANCE MOTOR, 230/460 V, 1760 RPM, 3 PHASE AND 4" TRI-CLAMP IN/OUTLET, OVERALL DIM...
BALDOR
APROX. 6' COP TANK (CLEAN OUT OF PLACE TANK) WITH BALDOR 5 HP MOTOR, 230/460 V, 3500 RPM, 3 PHASE A...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, VARIABLE FREQUENCY DRIVE (VFD) INSTALLED WITH ...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE, VARIABLE FREQUENCY DRIVE (VFD) INSTALLED WITH ...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOL...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH GEAR BOX AND DUAL VOLTAGE (230/360) 1740 R...
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOL...
VIKING PUMP KK124A
WASHDOWN VIKING PUMP MODEL KK124A ON BASE WITH NORD GEAR BOX AND DUAL VOLTAGE (230/360) 1745 RPM 1HP...
VIKING PUMP KK124A
VIKING PUMP KK124A ON BASE WITH SEW GEAR BOX AND DUAL VOLTAGE (230/360) 1740 RPM 2HP MOTOR, STAINLES...
2004 HX-U-15-4-X72
2004 HX-U-15-4-X72 2-TANK CIP SKID CONSISTS OF (2) 150 GAL. SINGLE SHELL TANK WITH WING TOP COVERS,-...
APROX. 250 GAL. S/S KETTLE WITH AGITATOR, 1/2 HP MOTOR, 230/460 V, 1725 RPM, 3 PHASE; PADDLE, STEAM
VIKING PUMP KK124A
VIKING PUMP KK124A STAINLESS STEEL WET PARTS ON BASE WITH SPEED ADJUSTABLE SEW GEAR BOX AND DUAL VOL...
2003 UV2100-B
2003 ULTRA VACUUM SEALER MODEL UV2100-B DOUBLE CHAMBER, 7.5 HP MOTOR, 240 V, 1745 RPM, 3 PHASE, OVER...
1998 600A
1998 600A VACUUM SEALER WITH DOUBLE CHAMBER, 208 V, 3 PHASE, CONTROL PANEL, HEATING ELEMENTS, SWIVEL...
DRUM WARMING INSULATED HEAVY DUTY SITS ON THE FLOOR. APPROX. 5 FT BY 12 FT BY 7FT.
EUSA
30 GALLON STAINLESS STEEL WATER JACKETED WITH ELECTRIC HEATER FOR JACKET AND SCRAPW SURFACE MIXER...
1100 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK-72" DIAMETER, 72" STRAIGHT SIDE, TOP ENTERING
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL
800 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK- 5 FT DIAMETER, 6 FT STRAIGHT SIDE
(5) TRAY CARTS - APROX. 26" L X 20" W X 70" TALL (7) TRAY CARTS - APROX. 26 L X 20 W X 70 TALL
1000 GALLON (APPROX.) STAINLESS STEEL SINGLE WALL TANK-70" DIAMETER, 60" STRAIGHT SIDE. FLAT TOP AND