Machinery Reconditioning and Warehousing Consolidation

Perfection Industrial Sales

Category: WOODWORKING EQUIPMENT

Total Lots: 475

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 51–100 of 475 lots

Year	Make	Model	Lot Description	Hammer Price
	ROYAL MASTER	TG-12X3	[ROYAL MASTER TG-12X3] PRECIS-O-MATIC CENTERLESS GRINDER, S/N 1742, GRINDING CAPACITY DIAMETER .004 - 1.5 DIAMETER, SIZE OF GRINDING WHEEL 3 WIDE X 5 BORE, DIAMETER OF THE GRINDING WHEEL MAXIMUM 12, DIAMETER OF THE GRINDING WHEEL MINIMUM 10, SIZE OF THE REGULATING WHEEL 3 WIDE X 1 BORE, DIAMETER OF THE REGULATING WHEEL MAXIMUM 6, DIAMETER OF THE REGULATING WHEEL MINIMUM 4, GRINDING WHEEL SPINDLE SPEED RATE 2040 RPM, REGULATING WHEEL SPINDLE SPEED RATES (VARIABLE) 25-480 RPM, MAIN SPINDLE DRIVE MOTOR 7.5 HP, ELECTRICS 3/60/230V, AUTOMATIC INFEED UNIT, HYDRAULIC SINGLE POINT DIAMOND DRESSER FOR BOTH THE GRINDING AND REGULATING WHEELS, THRU-FEED WORK REST, IN-FEED WORK REST WITH EJECTOR, LUBRICATION SYSTEM, LED REGULATORY WHEEL SPEED DISPLAY, LOAD METER, ROYAL MASTER WATERFALL COOLANT TANK ON CASTERS, DIAL INDICATOR FOR INFEED ROYAL MASTER · TG-12X3	🔒 Subscribe
2011	TSCHUDIN	HTG310	2011 TSCHUDIN HTG310 11.8" X 13.3" UNIVERSAL CYLINDRICAL GRINDER, S/N 1105, GRINDING DIAMETER 11.8", GRINDING LENGTH 13.38, CENTER HEIGHT 5.9", WORK HEAD SPINDLE TAPER MORSE 5, WORK HEAD SWIVEL RANGE 360, SPINDLE SPEED RANGE (STEPLESS) 50-500 RPM, TAILSTOCK BARREL TAPER MORSE 3, TAILSTOCK BARREL TRAVEL .787, WHEEL DIAMETER (NOMINAL) 13.77, WHEEL WIDTH (MAX) 1.96, WHEEL BORE DIAMETER 5, SPINDLE MOTOR POWER 3 KW, TABLE SLIDE TRAVEL 13.38, TABLE SLIDE SPEED RANGE 0-196/MIN., TABLE SWIVELING RANGE +/- 11, WHEEL HEAD SLIDE MANUAL TRAVEL 1.77, WHEEL HEAD FAST APPROACH TRAVEL 1.49, NORMAL INFEED TRAVEL (MAX.) 0.047, FINE INFEED TRAVEL (MAX.) 0.0059, SPARK OUT TIME RANGE 2-30 S, CYCLE SELECTOR FOR PLUNGE, TRAVERSE, AUTOMATIC AND MANUAL CYCLES WITH RAPID APPROACH, INFEED AND SPARK-OUT, VARIABLE SPEED WORK HEAD WITH COMBINATION LIVE/DEAD INDICATOR, TAILSTOCK, SPARE WHEEL HUBS, COOLANT WITH PAPER FILTRATION, 2 RISE BLOCKS FOR WHEEL HEAD, WORK HEAD, AND TAILSTOCK, SINGLE AXIS SONY DRO, WORK LIGHT, LEVELING PADS 2011 · TSCHUDIN · HTG310	🔒 Subscribe
	MARVEL	SERIES 8 MARK II	MARVEL SERIES 8 MARK II VERTICAL BANDSAW, TILTING HEAD, POWER FEED, WORK VISE, COOLANT SYSTEM, CHIP PAN S/N: 830244 MARVEL · SERIES 8 MARK II	🔒 Subscribe
	EITEL	RP-160	EITEL RP-160 STRAIGHTENING PRESS, 175 TON, 79" X 10.75" STRAIGHTENING BED, 279" BED WIDTH EXTENSIONS, 72" LENGTH OF PRESSURE BEARING BED, 375 IPM RAM SPEED UP, 90 IPM RAM SPEED DOWN, 10" STROKE, 7/8" CONTROLLABLE STRAIGHTENING STROKE, 31.5" MAX DAYLIGHT, 13-3/4" MIN DAYLIGHT, 13.75" DEPTH OF STROKE, 19.75" FRONT OF TABLE TO FACE, 35" TABLE HEIGHT, 9.5" CENTERS HEIGHT, 25 HP, COMPLETE ELECTRICAL CONTROLS, STROKE CONTROL, WR3 SHAFT STRAIGHTENING ATTACHMENT S/N: 25373 EITEL · RP-160	🔒 Subscribe
	EITEL	RP-200	[EITEL] [RP-200] STRAIGHTENING PRESS, S/N 14195, 220 TON, 59.87" X 10.75" STRAIGHTENING BED, 55" LENGTH OF PRESSURE BEARING BED, 215 IPM RAM SPEED UP, 60 IPM RAM SPEED DOWN, 10" STROKE, 0.875" CONTROLLABLE STRAIGHTENING STROKE, 33" MAX DAYLIGHT, 13.75" MIN DAYLIGHT, 13.75" DEPTH OF THROAT, 21" FRONT OF TABLE TO FACE, 31" TABLE HEIGHT, 25 HP, STROKE CONTROL EITEL · RP-200	🔒 Subscribe
	ELDORADO	MEGA M-75-1041	ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1641, 0.75" MAX DRILLING , 0.055" MIN DRILLING , 30" MAX DRILLING DEPTH, .1-99.9 RPM DRILLING FEED RATE, 725-5860 RPM, 200 IPM RAPID FEEDRATE, 22" X 26" WORK TABLE, 8" HEIGHT OF SPINDLE CENTERLINE, 1900 PSI MAX COOLANT PRESSURE, 90 GALLON, 2 HP SPINDLE DRIVE, 7.5 HP FEED MOTOR, MEGA FLOW HIGH PRESSURE COOLANT SYSTEM, THUMB WHEEL FEED RATE, SPINDLE LOAD METER, 7.5" 6-JAW CHUCK, WHIP GUIDE (HSD1187) ELDORADO · MEGA M-75-1041	🔒 Subscribe
	TOYOTA	52-6FGCU45	TOYOTA 52-6FGCU45 10,000 LB LP FORKLIFT, SIDE SHIFT, THREE-STAGE MAST, SOLID TIRE, OVERHEAD PROTECTION, 42" FORK LENGTH S/N: 61028 TOYOTA · 52-6FGCU45	🔒 Subscribe
	BRUTE	BM15	BRUTE HEAVY LIFT BM15 FORKLIFT BOOM ATTACHMENT, 15,000 LB. MAX CAPACITY, 76" MAX REACH S/N: 1930 BRUTE · BM15	🔒 Subscribe
	ELDORADO	MEGA M-75-1041	ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1107, 0.75" MAX DRILLING , 0.055" MIN DRILLING , 30" MAX DRILLING DEPTH, .1-99.9 RPM DRILLING FEED RATE, 480-3895 RPM, 200 IPM RAPID FEEDRATE, 22" X 22" WORK TABLE, 8" HEIGHT OF SPINDLE CENTERLINE, 1500 PSI MAX COOLANT PRESSURE, 60 GALLON, 1.5 HP SPINDLE DRIVE, 1 HP FEED MOTOR, MEGA FLOW HIGH PRESSURE COOLANT SYSTEM, THUMB WHEEL FEED RATE, SPINDLE LOAD METER (HSD1176) ELDORADO · MEGA M-75-1041	🔒 Subscribe
	RUSH	FC 500D	RUSH FC 500D PCD, CARBIDE, & HSS TOOL GRINDER, S/N RF-9024, 0"-.0315" GRINDING TIP RADII, 0.118"-1.02" ROUND TOOL SHANK , 3600 RPM, 3 HP, 5.12" HEIGHT ADJUSTMENT, 0-50 OSCILLATION FREQUENCY, 0-2.362" OSCILLATION STROKE, 0-16.535" OSCILLATION STROKE RANGE, -3-25 INCLINATION ANGLE, 6" X 1.5" X 1.5" GRINDING WHEEL SIZE, 8.27" X 6.3" CROSS-TABLE CLAMPING SURFACE W/ (4) T-SLOTS, 3.74" CROSS-TABLE SLIDE TRAVELS, 5.118" CONTROLLED INFEED TRAVEL, 3.15" MAX RAPID TRAVEL, 200 CROSS TABLE SWIVEL, 240 CROSS TABLE PILOT, VARIABLE GRINDING FORCE, 2-AXIS PLUS ANGLE DRO, CROSS TABLE HAND WHEEL DIVISION 0.00039 (1), GRINDING FORCE PRESSURE REGULATOR 0 TO 101 LBS., INFEED (SWITCHABLE) 0.00005, SWIVEL ANGLE 0.05 (3 MINUTES) INCREMENTS, VIDEO OPTICAL MEASURING SYSTEM WITH ZOOM 0.75-4.5X, ROUND TOOL GRINDING ATTACHMENT WITH REMOVABLE TOOL CENTER, UNIVERSAL QUICK CLAMPING FIXTURE FOR CONICAL RELIEF COMPLETE WITH SQUARE WORK PIECE HOLDERS, LARGE ASSESSMENT OF TOOLING AND ACCESSORIES INCLUDING DIAMOND WHEELS, COOLANT WITH PAPER FILTRATION RUSH · FC 500D	🔒 Subscribe
2007	SUNNEN	SV-310	2007 SUNNEN SV-310 VERTICAL HONING MACHINE, S/N 1F1-1011, 3/4"-8" ID RANGE, 28" MAX. WORKPIECE LENGTH, 40"X70" WORKPIECE ENVELOPE, 45" CARRIAGE TRAVEL, 30" STROKE TRAVEL, 160 SPM, 2000 LB. WORKPIECE WEIGHT, 7.5 HP STROKE MOTOR, 225 LBF-IN FEED FORCE, SUMP PUMP MOTOR 1/3 HP @ 30 GPM, 2 HP COOLANT PUMP, 72 GALLON TANK, SUNNEN WINDOWS 7 ULTIMATE W/ SUNNEN 3.4.0.0 PC BASED PROGRAMMABLE STROKING SYSTEM & PENDANT MOUNTED TOUCH SCREEN MONITOR, X-AXIS SERVO, PROGRAMMABLE DEPTH, COOLANT AND FILTRATION SYSTEM, SLUDGE CONVEYOR, CHILLER 2007 · SUNNEN · SV-310	🔒 Subscribe
	HEM	TWISTER	HEM TWISTER 14" X 20" AUTOMATIC PIVOT MITERING PRODUCTION BAND SAW S/N: 704499 CAPACITIES: 14" X 20" RECTANGLE AT 90, 14" X 15" RECTANGLE AT 45, 14" X 10" RECTANGLE AT 3, 15' X 1-1/5" X , 042" BLADE SIZE, 60-300S SFM BLADE SPEED, 5 HP, 0-800 LBS. CUTTING PRESSURE, 0-3 SECONDS FEED RATE, 1000 LBS. MAX CLAMPING PRESSURE, COOLANT PUMP, 0-24" STOCK INDEXING, 8000 LBS. CARRIAGE SUTTLE LOAD CAP, 24" AUTOMATIC SHUTTLE VISE W/ MULTIPLE STROKING, SEMI AUTO AND FULL AUTO MODES, 6' LONG X 3500 LB. CAPACITY FEED TABLE, VISE CLAMPING, ARM ELEVATION HEM · TWISTER	🔒 Subscribe
	HYD-MECH	H-26	HYD-MECH H-26 26" X 26" DUAL POST HORIZONTAL BAND SAW, S/N NA, 90 RECTANGLE (H X W) 26" X 26", CAPACITIES- 90 ROUND 26", 90 SQUARE 26, BLADE DRIVE 20 HP, BLADE SPEED 75-300 SFM, BLADE SIZE 2 X 33, TABLE HEIGHT 38, HYDRAULIC DRIVE 5 HP, COOLANT TANK CAPACITY 50 GAL, HYDRAULIC TANK CAPACITY 9.5 GAL, 480V HYD-MECH · H-26	🔒 Subscribe
	OKAMOTO	ACC-124DX	12" X 24" PROGRAMMABLE HIGH-PRECISION SURFACE GRINDER, NOMINAL GRINDING CAPACITY 12" X 24", MAXIMUM HEIGHT UNDER 12" WHEEL 13.7", TABLE SPEED INFINITELY VARIABLE UP TO 82 FPM, MAX. LONGITUDINAL TABLE MOVEMENT: MANUAL 30", AUTO CROSS FEED INCREMENT 0.002" TO 0.80", AUTO CONTINUOUS CROSS FEED 4 - 40 FPM, CROSS FEED, MANUAL, HAND FEED PER REV 0.25", GRAD, OF HANDWHEEL 0.001", MAX, CROSS FEED, MANUAL 14", AUTO INCREMENTAL DOWN FEED INCREMENTS 0.00005" TO 0.0015", POWER RAPID WHEEL POSITIONING RATE 16 IPM, SPINDLE MOTOR 5 HP, WHEEL SIZE 12" X 1, 5" X 5" S/N: 63134 OKAMOTO · ACC-124DX	🔒 Subscribe
	CLAUSING	COLCHESTER 17	CLAUSING COLCHESTER 17" X 40" ENGINE LATHE, S/N 7/0217/16636DD, 28" SWING OVER GAP, 3.1" HOLE THRU SPINDLE, 40" CENTERS, 12.3" CROSS-SLIDE CROSS-FEED TRAVEL, 6" COMPOUND REST TRAVEL, 2.9" TAILSTOCK SPINDLE , 8.5" TAILSTOCK SPINDLE TRAVEL, (16) 20-1600 RPM, THREADING, NEWALL 2-AXIS DRO, 10" 3-JAW CHUCK, 10 HP MOTOR, 230V/3/60, 4-WAY TOOL POST, REMOVABLE GAP, COOLANT CHOP PAN CLAUSING · COLCHESTER 17	🔒 Subscribe
	OKAMOTO	IGM-2M	[OKAMOTO IGM-2M] MICRO PROCESSOR CONTROLLED INTERNAL GRINDER, S/N 11574, MAXIMUM TO BE GROUND 0.23-7.87, GRINDING STROKE (MAX) 7.87, SWING OVER TABLE 23.6, MAXIMUM SWING INSIDE THE CHUCK COVER 13.7, TABLE SPEED 1.96-591 IPM, WORK HEAD SWIVELING ANGLE -5 TO +30, GRADUATION OF HANDWHEEL (DIAMETER)(X1) 0.001M; (X10) 0.01MM, .039-.394, SPINDLE SPEED (VARIABLE) 0-20,000 RPM, WORK SPINDLE SPEED 50-850 RPM, WORK SPINDLE 2HP, WHEEL SPINDLE 3HP, HYDRAULIC TANK 3HP, HYDRAULIC OIL TANK CAPACITY 60 LITERS, 12 FACE PLATE CHUCK, OKAMOTO MINI PROCESSOR FOR PROGRAMMABLE AUTOMATIC GRINDING CYCLES, SIZE COMPENSATION, DRESSING CYCLES, FULLY PROGRAMMABLE VARIABLE SPEED WHEEL HEAD, VARIABLE SPEED WORK HEAD WITH HYDRAULIC CYLINDER, PROGRAMMABLE INDEPENDENT SLIDE WHEEL DRESSER WITH SWIVEL POSITIONING, SWIVEL TABLE, HANDWHEEL, JOYSTICK AND MPG POSITIONING, FREE STANDING HYDRAULICS, COOLANT PUMP AND TANK WITH PAPER FILTRATION OKAMOTO · IGM-2M	🔒 Subscribe
	TECHNIDRILL/TRIAD	148-1.0-15-1CR	2006 TECHNIDRILL/TRIAD 148-1.0-15-1CR 1" X 48" COUNTER ROTATING DEEP HOLE DRILL S/N: 7033-6/91, DRILLING DEPTH MAX. 48 + 6 CLAMP, DRILLING DIAMETER MAX. 1, FEED RATES .5-40 IPM, RAPID TRAVERSE RATE 100 IPM, RESERVOIR CAPACITY 200 GALLONS, HIGH PRESSURE PUMP 20 HP, WORKTABLE DIMENSIONS (T-SLOTTED) 72 X 12, SWING OVER WORKTABLE 24, SPINDLE SPEEDS (INFINITELY VARIABLE) 400-2900 RPM, SPINDLE 15 HP, COUNTER ROTATING CHUCK 8 3-JAW, COUNTER ROTATING HORSEPOWER 1 HP, COUNTER ROTATING TAILSTOCK ASSEMBLY, DRILL WHIP GUIDES, CHIP CONVEYOR, 3-JAW ROTATING CHUCK ON PRESSURE HEAD, BALL SCREW FEED, DIRECT LOGIC 305 PLC OPERATORS CONTROL PEDESTAL WITH CONTROLS FOR SPINDLE LOAD METER, VARIABLE FEED RATE, VARIABLE SPINDLE SPEED WITH LED RPM DISPLAY, AUTOMATIC RETRACT AND ADVANCE OF SPINDLE, HIGH PRESSURE COOLANT AND FILTRATION SYSTEM WITH HEAT EXCHANGE, WHIP GUIDE TECHNIDRILL/TRIAD · 148-1.0-15-1CR	🔒 Subscribe
	YALE	MR040ACNM24TE095	YALE MR040ACNM24TE095 4,000 LB. ELECTRIC STAND-UP REACH FORKLIFT, S/N A815N03124T, THREE-STAGE MAST, 24V YALE · MR040ACNM24TE095	🔒 Subscribe
	BRIDGEPORT	SERIES I	2 HP BRIDGEPORT SERIES I VERTICAL MILL, S/N 245516, 9" X 48" POWER FEED TABLE, (3) T-SLOTS, 32.5" X, 12"Y, 5"Z, 16" VERTICAL KNEE, 2.5-18.5" MIN/MAX DISTANCE NOSE TO SPINDLE, 6.75-18.75" MIN/MAX DISTANCE SPINDLE TO FACE OF COLUMN, 12" RAM TRAVEL, 90 HEAD TILT RIGHT/LEFT, 60-4200 RPM, R8 SPINDLE TAPER, ACU-RITE III 2-AXIS DIGITAL READOUT, 4" RISER BRIDGEPORT · SERIES I	🔒 Subscribe
	OSTER	716 6"	OSTER 716 6" PIPE AND BOLT THREADING MACHINE, S/N NA, STANDARD PIPE RANGE 1" - 6", STANDARD BOLT RANGE 1/4", SPINDLE SPEEDS (4) 12, 18, 29, 43, CARRIAGE TRAVEL, 18.5", MAIN MOTOR 5HP, QUICK ACTING DIE HEAD COVERS ENTIRE RANGE OF MACHINE, SEGMENT TYPE DIES AND HOLDERS, REAR MOUNTED BLOCK W/ ADJUSTABLE SLIDE WITH CUT-OFF AND CHAMFER TOOL, SWING ARM REAMING TOOL, REAR GRIPPING CHUCK WITH 3 POINT WORK REST, HAND WHEEL ADJUSTMENT, CHUCK WRENCH, PUSH BUTTON CONTROLS FOR FORWARD, REVERSE, JOG AND RUN, 2.5 - 6" DIE HOLDERS OSTER · 716 6"	🔒 Subscribe
2012	NEW DIMENSION	6500 N0E	2012 NEW DIMENSION 6500 N0E 1/2" X 6' POWER BENDING ROLLS, S/N 12123012, 6' LENGTH, 1/2" MAX. SHEET THICKNESS, 72 MAX. SHEET WIDTH, 5 HP, 3 PHASE, 60 CYCLE, 230V, MANUALLY ADJUSTABLE TOP ROLL, FIXED PINCH ROLLS, ALL 3 ROLLS POWER DRIVEN, ELECTRIC FOOT PEDAL CONTROL FOR FORWARD AND REVERSE, OPERATION, SINGLE SPEED GEARED DRIVE, GANTRY SHEET LOADER COMPLETE W/ (2) 1 TON HOISTS WITH ERIEZ MAGNETIC SHEET LIFTERS, SHEET LOAD TABLE, INFEED TABLE, DISCHARGE TABLE, BUNDLE COLLECTION TABLE 2012 · NEW DIMENSION · 6500 N0E	🔒 Subscribe
	UNKNOWN		UNKNOWN MAKE HEAVY DUTY FORKLIFT BOOM, APPROX. 35,000 LB. CAPACITY, 6' MAX REACH S/N: NA UNKNOWN	🔒 Subscribe
	SKYJACK	SJIII 3219	SKYJACK SJIII 3219 SCISSOR LIFT, 19' MAX PLATFORM HEIGHT, 35.44" DECK EXTENSION, 25' MAX WORKING HEIGHT, 550 LB. MAX PLATFORM WEIGHT CAPACITY S/N: NA SKYJACK · SJIII 3219	🔒 Subscribe
2013	BACE	V63HD	2013 BACE V63HD VERTICAL BALER, S/N V63HD1504597, 60" X 30" X 48" H NOMINAL BALE SIZE, 1,100 LBS. MAX BALE WEIGHT, 50 CU. FT BALE VOLUME, 5 BALE SLOTS, 54.5" LOADING HEIGHT, SEMI-AUTOMATIC EJECTOR SYSTEMS, 15 HP, 3/60/460V ELECTRICAL 2013 · BACE · V63HD	🔒 Subscribe
2013	NICHOLS	BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE	2013 NICHOLS BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE, S/N 1358A, ALLEN BRADLEY MICROLOGIX PLC CONTROLS W/ PANELVIEW COLOR HMI PROGRAMMABLE SERVO CONTROL, 10" X 42" WORKING AREA, 16" X 48" TABLE, 4.5"-16.5" HEIGHT BETWEEN SPINDLE & TABLE, 4"-12" SPINDLE NOSE SEPERATION, 37" MAX. CUTTING STROKE, 12" MAXIMUM LONGITUDINAL OFFSET OF HEADS, 50 NST TAPER, 1" SPINDLE HOLE , 100-1740 RPM, INFINITELY VARIABLE 0 - 480 RPM, 3" SADDLE TRAVERSE, 0-60 IPM SADDLE TRAVERSE RATE, 4.625" VERTICAL TRAVEL OF KNEE, 0-60 IPM KNEE TRAVERSE RATE, KNEE TRAVEL RATE 12", SPINDLE EXTENSION, (2) 10 HP SERVO VFD SPINDLE DRIVE MOTOR & CONTROLS, AC SERVO ELEVATING MOTORS, AC SERVO SADDLE FEED SERVO DRIVE 2013 · NICHOLS · BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE	🔒 Subscribe
	DAKE	6-275	DAKE 6-275 75-TON H-FRAME SHOP PRESS S/N 173528 DAKE · 6-275	🔒 Subscribe
	HEGENSCHEIDT	7925 SR3000	HEGENSCHEIDT 7925 SR3000 TUBE SKIVING AND FINISHING MACHINE, S/N NA, 1.75" MIN WORKPIECE BORE , 11.5" MAX WORKPIECE BORE , 12" CENTER HEIGHT, 120" MAX WORKPIECE LENGTH, 200 IN/MIN RAPID TRAVERSE, 75-1200 RPM, .024-.138 IN/REV FEED RATES, 40 HP, AUTOMATIC CYCLING, 2-SPEED GEARED HEADSTOCK, COOLANT INDUCTION UNIT, CHUCK & CENTERING TAILSTOCK, PENDANT CONTROL COOLANT SYSTEM W/ FORCE MONITOR, HIGH PRESSURE COOLANT PUMP, 28" X 126" T-SLOTTED WORK FIXTURE BAD, TAILSTOCK POSITION, WORK SUPPORTS. MISC. TOOLING HEGENSCHEIDT · 7925 SR3000	🔒 Subscribe
	ELDORADO	MEGA M-75-1061	ELDORADO MEGA M-75-1061 3/4" X 15" PRECISION DEEP HOLE GUN DRILL, S/N 858, 6" JAW CHUCK, PNEUMATIC CLAMPING FIXTURES, MEGA F-18-1101-1 HIGH PRESSURE COOLANT ELDORADO · MEGA M-75-1061	🔒 Subscribe
	CALDWELL	20S-20-10	2020 CALDWELL 20S-20-10 SPREADER BAR, S/N 06-77909, 20 TON CAPACITY, 126" TOTAL LENGTH CALDWELL · 20S-20-10	🔒 Subscribe
	BARBER COLMAN	16-16 MULTICYCLE	[BARBER COLMAN NO. 16-16 MULTICYCLE GEAR HOBBING MACHINE] 16" MAX RATED WORK DIA, 6 DP - MAX DP AND DIA IN STEEL, 5 MAX RATE HOB DIA, 16 MAX TRAVEL OF HOB CARRIAGE, 44 MAX DISTANCE WORK SPINDLE FACE TO TAIL CENTER, 4.125 DIA OF WORK SPINDLE BORE, 45 DEGREE MAX HOB SWIVEL ANGLE SETTING, 1.25 HOB ARBOR DIA, 425 RPM MAX HOB SPEED, .5 MAX VERTICAL FEED DISTANCE, .875 MAX TOTAL VERTICAL DISTANCE, 7.5 HP, 3/60/460V ELECTRICAL, STANDARD OPERATION OR HYDRAULIC MULTICYCLE WITH PLUNGE OR SQUARE CYCLE, WORKSLIDE POWER CLAMPING, GOOSE-NECK HOB HEAD, DOUBLE THREAD INDEX, CHANGE GEARS, LEVER OPERATED TAILSTOCK, AUTOMATIC LUBRICATION SYSTEM, MD COOLANT SYSTEM S/N: 4569 BARBER COLMAN · 16-16 MULTICYCLE	🔒 Subscribe
	PRAB	SMD-12A	PRAB SMD-12A 12" METAL TURNINGS SHREDDER, BLADE WIDTH 12", SHREDDER MOTOR 5HP, AUGER MOTOR .5 HP, DISCHARGE HEIGHT 15", HOPPER OPENING 30 X 38, AUGER DIAMETER 10, AUGER LENGTH 48, EQUIPPED W/ 30 X 38 FEED HOPPER, PRAB GRDF AUGER CONVEYOR, SMD-12A ROTARY BLADE SHREDDER, GRAVITY DISCHARGE PRAB · SMD-12A	🔒 Subscribe
	BARBER COLMAN / PFAUTER		HEAVY DUTY CABINET W/ SLIDE-OUT DRAWERS W/ ASSORTED BARBER COLMAN AND PFAUTER CHANGE GEARS BARBER COLMAN / PFAUTER	🔒 Subscribe
	CINCINNATI MILACRON	340-20	CINCINNATI MILACRON 340-20 TWIN-GRIP GRINDING WHEEL HUB CINCINNATI MILACRON · 340-20	🔒 Subscribe
	TAYLOR	RIGGER SPECIAL	COUNTERWEIGHT FOR TAYLOR RIGGER SPECIAL FORKLIFT, APPROX. 10,000 LBS. TAYLOR · RIGGER SPECIAL	🔒 Subscribe
	COLLINS	66A THREAD-O-MATIC	COLLINS 66A THREAD-O-MATIC THREADING MACHINE, S/N 6602, 6" MAX PIPE DIA, 4-SPEED, 3-STATION PUSH BUTTON SWITCH COLLINS · 66A THREAD-O-MATIC	🔒 Subscribe
	HYSTER	S150	HYSTER S150 COUNTERWEIGHT, 1543 LBS. HYSTER · S150	🔒 Subscribe
2011	CHICAGO PNEUMATIC	QRS30 HP UL	2011 CHICAGO PNEUMATIC QRS30 HP UL ROTARY SCREW AIR COMPRESSOR, S/N CAI5115898, 30 HP, 97.5 CFM, 132 PSI MAX OPERATING PRESSURE, 132 GALLON TANK, CONTINUOUS DUTY CYCLE 2011 · CHICAGO PNEUMATIC · QRS30 HP UL	🔒 Subscribe
	POWER BOSS	PHOENIX 3030	POWER BOSS PHOENIX 3030 WALK BEHIND VACUUM FLOOR SCRUBBER S/N: 18100355(2) 15" SCRUB BRUSHES, 30" SCRUB PATH, 3/4 HP BRUSH MOTOR, 180 RPM, 30 GALLON SOLUTION CAPACITY, 30 GALLON RECOVERY CAPACITY POWER BOSS · PHOENIX 3030	🔒 Subscribe
	POREBA	TR-100B1	POREBA TR-100B1 LATHE MOTORIZED BORING TAILSTOCK POREBA · TR-100B1	🔒 Subscribe
	KIRA	VTC30E	KIRA VTC30E CNC DRILLING AND TAPPING CENTER W/ FANUC 21M CONTROL, TRAVELS: 11.8"X, 9.8"Y, 11.8"Z, 11.8" X 19.6" TABLE, 7.9"-19.6" MIN/MAX DISTANCE FROM SPINDLE TO TABLE, 220 LBS. MAX TABLE CAPACITY, 118"/MIN RAPIDS, 240-8000 IMP SPINDLE SPEEDS, 5 HP SPINDLE DRIVE, BT30 SPINDLE TAPER, 10-POSITION TURRET, COOLANT PUMP AND TANK W/ SKIMMER S/N: NA KIRA · VTC30E	🔒 Subscribe
2008	TRUMPF	TRUMARK STATION 7000	2008 TRUMPF TRUMARK STATION 7000 LASER MARKING MACHINE, S/N E0852A0169, MAX. WORK PIECE LENGTH 37.7, MAX. WORK PIECE HEIGHT 17.7, MAX. WORK PIECE DEPTH 14.7, MAX. WORK PIECE WEIGHT IN ROTARY 110 LBS., MAX. Z-AXIS TRAVEL 21.6, MAX. X-AXIS TRAVEL 25.5, RAPID TRAVERSE (X, Y, Z) 6,000 IPM, LASER 5 WATT, PULSE DURATION 3-200 NS, WAVELENGTH 1,0645 NM, 3-AXIS POSITIONING, AUXILIARY 4TH ROTARY FOR MARKING ROUND PARTS 2008 · TRUMPF · TRUMARK STATION 7000	🔒 Subscribe
	HARRISON	ALPHA 400	[HARRISON ALPHA 400 GAP BED-FLAT COMBINATION CNC TEACH LATHE] S/N A30036, GE FANUC ALPHA CNC CONTROL, 15.8" SWING OVER BED, 23" SWING IN GAP, 6.5" GAP WIDTH FROM FACEPLATE, 9.6" SWING OVER CROSS SLIDE, 10" 3-JAW CHUCK, 50" CENTERS, D1-6 SPINDLE NOSE, 2.1" SPINDLE BORE, 15-2500 RPM SPINDLE SPEEDS, THREADING, 240 IPM X/Z RAPID TRAVERSE, DORIAN NVIT8-100 8-POS TURRET, REMOVABLE GAP HARRISON · ALPHA 400	🔒 Subscribe
	WTO	NZX2500Y	2 WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER WTO · NZX2500Y	🔒 Subscribe
2001	FORD	F-150	2001 FORD F-150 XLT CREW CAB PICKUP TRUCK TRITON V8, RUNNING BOARDS, BED COVER, APPROX. 196,000 MILES, (ODOMETER MALFUNCTIONS ONLY SHOWING MILEAGE OCCASIONALLY) S/N: 1FTRW08L61KF59983 2001 · FORD · F-150	🔒 Subscribe
	MORI SEIKI	NZX2500Y	(3) WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER MORI SEIKI · NZX2500Y	🔒 Subscribe
			PALLET COMPRISING ASSORTED VARIABLE FREQUENCY DRIVES, MISC. MACHINE BOARDS, DISCONNECT SWITCH AND BUS BAR SAFETY SWITCH	🔒 Subscribe
	KIWA	KNH-400	KIWA KNH-400 HORIZONTAL MACHINING CENTER, S/N PB6120R, FANUC 18IM CONTROL, TRAVELS: 23.6"X, 23.6"Y, 19.8"Z, 15.8 X 15.8 PALLET SIZE, 880 LBS. PALLET CAPACITY, 1 PALLET INDEXING (B-AXIS), RAPID FEEDRATE: X-1968 IPM, Y-1968 IPM, Z-1968 IPM, 10,000 RPM SPINDLE SPEED, CAT 40, 120-ATC, 25 HP MAIN MOTOR, MARPOSS PROBING, FULL CONTOURING 4H-AXIS, THRU-SPINDLE COOLANT, COOLANT SYSTEM W/ CHIP CONVEYOR, OIL CHILLER, MIST KIWA · KNH-400	🔒 Subscribe
	BARBER COLMAN	NO. 6-16 MULTICYCLE	[BARBER COLMAN] NO. 6-16 MULTICYCLE GEAR HOBBING MACHINE, S/N 5364, 16 DP-2"/ 48 DP-6" MAX DO & DISTANCE, 6" MAX WORK RATED , 16.5" MAX TRAVEL OF HOB SLIDE, 21.7" MAX DISTANCE WORK SPINDLE FACE TO TAIL CENTER, 18.7" MAX DISTANCE WORK SPINDLE FACE TO C/L OF HOB SPINDLE, 3-1/8" DISTANCE C/L TO WORK SPINDLE TO C/L OF HOB SPINDLE, 3" DISTANCE C/L OF WORK SPINDLE TO BOTTOM OF OVERARM, 3" MAX HOB 60 R- 90 L MAX SWIVEL ANGLE, 3/4" HOB ARBOR, 200-800 RPM HOB SPEED RANGE, 0.015"-0.15" FEED RANGE, 0.010" -0.250" VERTICAL FEED RANGE DEPTH OF CUT, TRIPLE THREAD INDEX, POWER RAPID TRAVERS, AUTOMATIC HOB SHIFTER BARBER COLMAN · NO. 6-16 MULTICYCLE	🔒 Subscribe
	GLEASON	#12	GLEASON #12 STRAIGHT BEVEL GEAR GENERATOR, S/N 18450 GLEASON · #12	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I 1.5 HP VERTICAL MILL, 9" X 42" POWER FEED TABLE S/N: 140499 BRIDGEPORT · SERIES I	🔒 Subscribe

Year	Make	Model	Description	Price
	ROYAL MASTER	TG-12X3	[ROYAL MASTER TG-12X3] PRECIS-O-MATIC CENTERLESS GRINDER, S/N 1742, GRINDING CAPACITY DIAMETER .004 - 1.5 DIAMETER, SIZE OF GRINDING WHEEL 3 WIDE X 5 BORE, DIAMETER OF THE GRINDING WHEEL MAXIMUM 12, DIAMETER OF THE GRINDING WHEEL MINIMUM 10, SIZE OF THE REGULATING WHEEL 3 WIDE X 1 BORE, DIAMETER OF THE REGULATING WHEEL MAXIMUM 6, DIAMETER OF THE REGULATING WHEEL MINIMUM 4, GRINDING WHEEL SPINDLE SPEED RATE 2040 RPM, REGULATING WHEEL SPINDLE SPEED RATES (VARIABLE) 25-480 RPM, MAIN SPINDLE DRIVE MOTOR 7.5 HP, ELECTRICS 3/60/230V, AUTOMATIC INFEED UNIT, HYDRAULIC SINGLE POINT DIAMOND DRESSER FOR BOTH THE GRINDING AND REGULATING WHEELS, THRU-FEED WORK REST, IN-FEED WORK REST WITH EJECTOR, LUBRICATION SYSTEM, LED REGULATORY WHEEL SPEED DISPLAY, LOAD METER, ROYAL MASTER WATERFALL COOLANT TANK ON CASTERS, DIAL INDICATOR FOR INFEED	🔒 Subscribe
2011	TSCHUDIN	HTG310	2011 TSCHUDIN HTG310 11.8" X 13.3" UNIVERSAL CYLINDRICAL GRINDER, S/N 1105, GRINDING DIAMETER 11.8", GRINDING LENGTH 13.38, CENTER HEIGHT 5.9", WORK HEAD SPINDLE TAPER MORSE 5, WORK HEAD SWIVEL RANGE 360, SPINDLE SPEED RANGE (STEPLESS) 50-500 RPM, TAILSTOCK BARREL TAPER MORSE 3, TAILSTOCK BARREL TRAVEL .787, WHEEL DIAMETER (NOMINAL) 13.77, WHEEL WIDTH (MAX) 1.96, WHEEL BORE DIAMETER 5, SPINDLE MOTOR POWER 3 KW, TABLE SLIDE TRAVEL 13.38, TABLE SLIDE SPEED RANGE 0-196/MIN., TABLE SWIVELING RANGE +/- 11, WHEEL HEAD SLIDE MANUAL TRAVEL 1.77, WHEEL HEAD FAST APPROACH TRAVEL 1.49, NORMAL INFEED TRAVEL (MAX.) 0.047, FINE INFEED TRAVEL (MAX.) 0.0059, SPARK OUT TIME RANGE 2-30 S, CYCLE SELECTOR FOR PLUNGE, TRAVERSE, AUTOMATIC AND MANUAL CYCLES WITH RAPID APPROACH, INFEED AND SPARK-OUT, VARIABLE SPEED WORK HEAD WITH COMBINATION LIVE/DEAD INDICATOR, TAILSTOCK, SPARE WHEEL HUBS, COOLANT WITH PAPER FILTRATION, 2 RISE BLOCKS FOR WHEEL HEAD, WORK HEAD, AND TAILSTOCK, SINGLE AXIS SONY DRO, WORK LIGHT, LEVELING PADS	🔒 Subscribe
	MARVEL	SERIES 8 MARK II	MARVEL SERIES 8 MARK II VERTICAL BANDSAW, TILTING HEAD, POWER FEED, WORK VISE, COOLANT SYSTEM, CHIP PAN S/N: 830244	🔒 Subscribe
	EITEL	RP-160	EITEL RP-160 STRAIGHTENING PRESS, 175 TON, 79" X 10.75" STRAIGHTENING BED, 279" BED WIDTH EXTENSIONS, 72" LENGTH OF PRESSURE BEARING BED, 375 IPM RAM SPEED UP, 90 IPM RAM SPEED DOWN, 10" STROKE, 7/8" CONTROLLABLE STRAIGHTENING STROKE, 31.5" MAX DAYLIGHT, 13-3/4" MIN DAYLIGHT, 13.75" DEPTH OF STROKE, 19.75" FRONT OF TABLE TO FACE, 35" TABLE HEIGHT, 9.5" CENTERS HEIGHT, 25 HP, COMPLETE ELECTRICAL CONTROLS, STROKE CONTROL, WR3 SHAFT STRAIGHTENING ATTACHMENT S/N: 25373	🔒 Subscribe
	EITEL	RP-200	[EITEL] [RP-200] STRAIGHTENING PRESS, S/N 14195, 220 TON, 59.87" X 10.75" STRAIGHTENING BED, 55" LENGTH OF PRESSURE BEARING BED, 215 IPM RAM SPEED UP, 60 IPM RAM SPEED DOWN, 10" STROKE, 0.875" CONTROLLABLE STRAIGHTENING STROKE, 33" MAX DAYLIGHT, 13.75" MIN DAYLIGHT, 13.75" DEPTH OF THROAT, 21" FRONT OF TABLE TO FACE, 31" TABLE HEIGHT, 25 HP, STROKE CONTROL	🔒 Subscribe
	ELDORADO	MEGA M-75-1041	ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1641, 0.75" MAX DRILLING , 0.055" MIN DRILLING , 30" MAX DRILLING DEPTH, .1-99.9 RPM DRILLING FEED RATE, 725-5860 RPM, 200 IPM RAPID FEEDRATE, 22" X 26" WORK TABLE, 8" HEIGHT OF SPINDLE CENTERLINE, 1900 PSI MAX COOLANT PRESSURE, 90 GALLON, 2 HP SPINDLE DRIVE, 7.5 HP FEED MOTOR, MEGA FLOW HIGH PRESSURE COOLANT SYSTEM, THUMB WHEEL FEED RATE, SPINDLE LOAD METER, 7.5" 6-JAW CHUCK, WHIP GUIDE (HSD1187)	🔒 Subscribe
	TOYOTA	52-6FGCU45	TOYOTA 52-6FGCU45 10,000 LB LP FORKLIFT, SIDE SHIFT, THREE-STAGE MAST, SOLID TIRE, OVERHEAD PROTECTION, 42" FORK LENGTH S/N: 61028	🔒 Subscribe
	BRUTE	BM15	BRUTE HEAVY LIFT BM15 FORKLIFT BOOM ATTACHMENT, 15,000 LB. MAX CAPACITY, 76" MAX REACH S/N: 1930	🔒 Subscribe
	ELDORADO	MEGA M-75-1041	ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1107, 0.75" MAX DRILLING , 0.055" MIN DRILLING , 30" MAX DRILLING DEPTH, .1-99.9 RPM DRILLING FEED RATE, 480-3895 RPM, 200 IPM RAPID FEEDRATE, 22" X 22" WORK TABLE, 8" HEIGHT OF SPINDLE CENTERLINE, 1500 PSI MAX COOLANT PRESSURE, 60 GALLON, 1.5 HP SPINDLE DRIVE, 1 HP FEED MOTOR, MEGA FLOW HIGH PRESSURE COOLANT SYSTEM, THUMB WHEEL FEED RATE, SPINDLE LOAD METER (HSD1176)	🔒 Subscribe
	RUSH	FC 500D	RUSH FC 500D PCD, CARBIDE, & HSS TOOL GRINDER, S/N RF-9024, 0"-.0315" GRINDING TIP RADII, 0.118"-1.02" ROUND TOOL SHANK , 3600 RPM, 3 HP, 5.12" HEIGHT ADJUSTMENT, 0-50 OSCILLATION FREQUENCY, 0-2.362" OSCILLATION STROKE, 0-16.535" OSCILLATION STROKE RANGE, -3-25 INCLINATION ANGLE, 6" X 1.5" X 1.5" GRINDING WHEEL SIZE, 8.27" X 6.3" CROSS-TABLE CLAMPING SURFACE W/ (4) T-SLOTS, 3.74" CROSS-TABLE SLIDE TRAVELS, 5.118" CONTROLLED INFEED TRAVEL, 3.15" MAX RAPID TRAVEL, 200 CROSS TABLE SWIVEL, 240 CROSS TABLE PILOT, VARIABLE GRINDING FORCE, 2-AXIS PLUS ANGLE DRO, CROSS TABLE HAND WHEEL DIVISION 0.00039 (1), GRINDING FORCE PRESSURE REGULATOR 0 TO 101 LBS., INFEED (SWITCHABLE) 0.00005, SWIVEL ANGLE 0.05 (3 MINUTES) INCREMENTS, VIDEO OPTICAL MEASURING SYSTEM WITH ZOOM 0.75-4.5X, ROUND TOOL GRINDING ATTACHMENT WITH REMOVABLE TOOL CENTER, UNIVERSAL QUICK CLAMPING FIXTURE FOR CONICAL RELIEF COMPLETE WITH SQUARE WORK PIECE HOLDERS, LARGE ASSESSMENT OF TOOLING AND ACCESSORIES INCLUDING DIAMOND WHEELS, COOLANT WITH PAPER FILTRATION	🔒 Subscribe
2007	SUNNEN	SV-310	2007 SUNNEN SV-310 VERTICAL HONING MACHINE, S/N 1F1-1011, 3/4"-8" ID RANGE, 28" MAX. WORKPIECE LENGTH, 40"X70" WORKPIECE ENVELOPE, 45" CARRIAGE TRAVEL, 30" STROKE TRAVEL, 160 SPM, 2000 LB. WORKPIECE WEIGHT, 7.5 HP STROKE MOTOR, 225 LBF-IN FEED FORCE, SUMP PUMP MOTOR 1/3 HP @ 30 GPM, 2 HP COOLANT PUMP, 72 GALLON TANK, SUNNEN WINDOWS 7 ULTIMATE W/ SUNNEN 3.4.0.0 PC BASED PROGRAMMABLE STROKING SYSTEM & PENDANT MOUNTED TOUCH SCREEN MONITOR, X-AXIS SERVO, PROGRAMMABLE DEPTH, COOLANT AND FILTRATION SYSTEM, SLUDGE CONVEYOR, CHILLER	🔒 Subscribe
	HEM	TWISTER	HEM TWISTER 14" X 20" AUTOMATIC PIVOT MITERING PRODUCTION BAND SAW S/N: 704499 CAPACITIES: 14" X 20" RECTANGLE AT 90, 14" X 15" RECTANGLE AT 45, 14" X 10" RECTANGLE AT 3, 15' X 1-1/5" X , 042" BLADE SIZE, 60-300S SFM BLADE SPEED, 5 HP, 0-800 LBS. CUTTING PRESSURE, 0-3 SECONDS FEED RATE, 1000 LBS. MAX CLAMPING PRESSURE, COOLANT PUMP, 0-24" STOCK INDEXING, 8000 LBS. CARRIAGE SUTTLE LOAD CAP, 24" AUTOMATIC SHUTTLE VISE W/ MULTIPLE STROKING, SEMI AUTO AND FULL AUTO MODES, 6' LONG X 3500 LB. CAPACITY FEED TABLE, VISE CLAMPING, ARM ELEVATION	🔒 Subscribe
	HYD-MECH	H-26	HYD-MECH H-26 26" X 26" DUAL POST HORIZONTAL BAND SAW, S/N NA, 90 RECTANGLE (H X W) 26" X 26", CAPACITIES- 90 ROUND 26", 90 SQUARE 26, BLADE DRIVE 20 HP, BLADE SPEED 75-300 SFM, BLADE SIZE 2 X 33, TABLE HEIGHT 38, HYDRAULIC DRIVE 5 HP, COOLANT TANK CAPACITY 50 GAL, HYDRAULIC TANK CAPACITY 9.5 GAL, 480V	🔒 Subscribe
	OKAMOTO	ACC-124DX	12" X 24" PROGRAMMABLE HIGH-PRECISION SURFACE GRINDER, NOMINAL GRINDING CAPACITY 12" X 24", MAXIMUM HEIGHT UNDER 12" WHEEL 13.7", TABLE SPEED INFINITELY VARIABLE UP TO 82 FPM, MAX. LONGITUDINAL TABLE MOVEMENT: MANUAL 30", AUTO CROSS FEED INCREMENT 0.002" TO 0.80", AUTO CONTINUOUS CROSS FEED 4 - 40 FPM, CROSS FEED, MANUAL, HAND FEED PER REV 0.25", GRAD, OF HANDWHEEL 0.001", MAX, CROSS FEED, MANUAL 14", AUTO INCREMENTAL DOWN FEED INCREMENTS 0.00005" TO 0.0015", POWER RAPID WHEEL POSITIONING RATE 16 IPM, SPINDLE MOTOR 5 HP, WHEEL SIZE 12" X 1, 5" X 5" S/N: 63134	🔒 Subscribe
	CLAUSING	COLCHESTER 17	CLAUSING COLCHESTER 17" X 40" ENGINE LATHE, S/N 7/0217/16636DD, 28" SWING OVER GAP, 3.1" HOLE THRU SPINDLE, 40" CENTERS, 12.3" CROSS-SLIDE CROSS-FEED TRAVEL, 6" COMPOUND REST TRAVEL, 2.9" TAILSTOCK SPINDLE , 8.5" TAILSTOCK SPINDLE TRAVEL, (16) 20-1600 RPM, THREADING, NEWALL 2-AXIS DRO, 10" 3-JAW CHUCK, 10 HP MOTOR, 230V/3/60, 4-WAY TOOL POST, REMOVABLE GAP, COOLANT CHOP PAN	🔒 Subscribe
	OKAMOTO	IGM-2M	[OKAMOTO IGM-2M] MICRO PROCESSOR CONTROLLED INTERNAL GRINDER, S/N 11574, MAXIMUM TO BE GROUND 0.23-7.87, GRINDING STROKE (MAX) 7.87, SWING OVER TABLE 23.6, MAXIMUM SWING INSIDE THE CHUCK COVER 13.7, TABLE SPEED 1.96-591 IPM, WORK HEAD SWIVELING ANGLE -5 TO +30, GRADUATION OF HANDWHEEL (DIAMETER)(X1) 0.001M; (X10) 0.01MM, .039-.394, SPINDLE SPEED (VARIABLE) 0-20,000 RPM, WORK SPINDLE SPEED 50-850 RPM, WORK SPINDLE 2HP, WHEEL SPINDLE 3HP, HYDRAULIC TANK 3HP, HYDRAULIC OIL TANK CAPACITY 60 LITERS, 12 FACE PLATE CHUCK, OKAMOTO MINI PROCESSOR FOR PROGRAMMABLE AUTOMATIC GRINDING CYCLES, SIZE COMPENSATION, DRESSING CYCLES, FULLY PROGRAMMABLE VARIABLE SPEED WHEEL HEAD, VARIABLE SPEED WORK HEAD WITH HYDRAULIC CYLINDER, PROGRAMMABLE INDEPENDENT SLIDE WHEEL DRESSER WITH SWIVEL POSITIONING, SWIVEL TABLE, HANDWHEEL, JOYSTICK AND MPG POSITIONING, FREE STANDING HYDRAULICS, COOLANT PUMP AND TANK WITH PAPER FILTRATION	🔒 Subscribe
	TECHNIDRILL/TRIAD	148-1.0-15-1CR	2006 TECHNIDRILL/TRIAD 148-1.0-15-1CR 1" X 48" COUNTER ROTATING DEEP HOLE DRILL S/N: 7033-6/91, DRILLING DEPTH MAX. 48 + 6 CLAMP, DRILLING DIAMETER MAX. 1, FEED RATES .5-40 IPM, RAPID TRAVERSE RATE 100 IPM, RESERVOIR CAPACITY 200 GALLONS, HIGH PRESSURE PUMP 20 HP, WORKTABLE DIMENSIONS (T-SLOTTED) 72 X 12, SWING OVER WORKTABLE 24, SPINDLE SPEEDS (INFINITELY VARIABLE) 400-2900 RPM, SPINDLE 15 HP, COUNTER ROTATING CHUCK 8 3-JAW, COUNTER ROTATING HORSEPOWER 1 HP, COUNTER ROTATING TAILSTOCK ASSEMBLY, DRILL WHIP GUIDES, CHIP CONVEYOR, 3-JAW ROTATING CHUCK ON PRESSURE HEAD, BALL SCREW FEED, DIRECT LOGIC 305 PLC OPERATORS CONTROL PEDESTAL WITH CONTROLS FOR SPINDLE LOAD METER, VARIABLE FEED RATE, VARIABLE SPINDLE SPEED WITH LED RPM DISPLAY, AUTOMATIC RETRACT AND ADVANCE OF SPINDLE, HIGH PRESSURE COOLANT AND FILTRATION SYSTEM WITH HEAT EXCHANGE, WHIP GUIDE	🔒 Subscribe
	YALE	MR040ACNM24TE095	YALE MR040ACNM24TE095 4,000 LB. ELECTRIC STAND-UP REACH FORKLIFT, S/N A815N03124T, THREE-STAGE MAST, 24V	🔒 Subscribe
	BRIDGEPORT	SERIES I	2 HP BRIDGEPORT SERIES I VERTICAL MILL, S/N 245516, 9" X 48" POWER FEED TABLE, (3) T-SLOTS, 32.5" X, 12"Y, 5"Z, 16" VERTICAL KNEE, 2.5-18.5" MIN/MAX DISTANCE NOSE TO SPINDLE, 6.75-18.75" MIN/MAX DISTANCE SPINDLE TO FACE OF COLUMN, 12" RAM TRAVEL, 90 HEAD TILT RIGHT/LEFT, 60-4200 RPM, R8 SPINDLE TAPER, ACU-RITE III 2-AXIS DIGITAL READOUT, 4" RISER	🔒 Subscribe
	OSTER	716 6"	OSTER 716 6" PIPE AND BOLT THREADING MACHINE, S/N NA, STANDARD PIPE RANGE 1" - 6", STANDARD BOLT RANGE 1/4", SPINDLE SPEEDS (4) 12, 18, 29, 43, CARRIAGE TRAVEL, 18.5", MAIN MOTOR 5HP, QUICK ACTING DIE HEAD COVERS ENTIRE RANGE OF MACHINE, SEGMENT TYPE DIES AND HOLDERS, REAR MOUNTED BLOCK W/ ADJUSTABLE SLIDE WITH CUT-OFF AND CHAMFER TOOL, SWING ARM REAMING TOOL, REAR GRIPPING CHUCK WITH 3 POINT WORK REST, HAND WHEEL ADJUSTMENT, CHUCK WRENCH, PUSH BUTTON CONTROLS FOR FORWARD, REVERSE, JOG AND RUN, 2.5 - 6" DIE HOLDERS	🔒 Subscribe
2012	NEW DIMENSION	6500 N0E	2012 NEW DIMENSION 6500 N0E 1/2" X 6' POWER BENDING ROLLS, S/N 12123012, 6' LENGTH, 1/2" MAX. SHEET THICKNESS, 72 MAX. SHEET WIDTH, 5 HP, 3 PHASE, 60 CYCLE, 230V, MANUALLY ADJUSTABLE TOP ROLL, FIXED PINCH ROLLS, ALL 3 ROLLS POWER DRIVEN, ELECTRIC FOOT PEDAL CONTROL FOR FORWARD AND REVERSE, OPERATION, SINGLE SPEED GEARED DRIVE, GANTRY SHEET LOADER COMPLETE W/ (2) 1 TON HOISTS WITH ERIEZ MAGNETIC SHEET LIFTERS, SHEET LOAD TABLE, INFEED TABLE, DISCHARGE TABLE, BUNDLE COLLECTION TABLE	🔒 Subscribe
	UNKNOWN		UNKNOWN MAKE HEAVY DUTY FORKLIFT BOOM, APPROX. 35,000 LB. CAPACITY, 6' MAX REACH S/N: NA	🔒 Subscribe
	SKYJACK	SJIII 3219	SKYJACK SJIII 3219 SCISSOR LIFT, 19' MAX PLATFORM HEIGHT, 35.44" DECK EXTENSION, 25' MAX WORKING HEIGHT, 550 LB. MAX PLATFORM WEIGHT CAPACITY S/N: NA	🔒 Subscribe
2013	BACE	V63HD	2013 BACE V63HD VERTICAL BALER, S/N V63HD1504597, 60" X 30" X 48" H NOMINAL BALE SIZE, 1,100 LBS. MAX BALE WEIGHT, 50 CU. FT BALE VOLUME, 5 BALE SLOTS, 54.5" LOADING HEIGHT, SEMI-AUTOMATIC EJECTOR SYSTEMS, 15 HP, 3/60/460V ELECTRICAL	🔒 Subscribe
2013	NICHOLS	BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE	2013 NICHOLS BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE, S/N 1358A, ALLEN BRADLEY MICROLOGIX PLC CONTROLS W/ PANELVIEW COLOR HMI PROGRAMMABLE SERVO CONTROL, 10" X 42" WORKING AREA, 16" X 48" TABLE, 4.5"-16.5" HEIGHT BETWEEN SPINDLE & TABLE, 4"-12" SPINDLE NOSE SEPERATION, 37" MAX. CUTTING STROKE, 12" MAXIMUM LONGITUDINAL OFFSET OF HEADS, 50 NST TAPER, 1" SPINDLE HOLE , 100-1740 RPM, INFINITELY VARIABLE 0 - 480 RPM, 3" SADDLE TRAVERSE, 0-60 IPM SADDLE TRAVERSE RATE, 4.625" VERTICAL TRAVEL OF KNEE, 0-60 IPM KNEE TRAVERSE RATE, KNEE TRAVEL RATE 12", SPINDLE EXTENSION, (2) 10 HP SERVO VFD SPINDLE DRIVE MOTOR & CONTROLS, AC SERVO ELEVATING MOTORS, AC SERVO SADDLE FEED SERVO DRIVE	🔒 Subscribe
	DAKE	6-275	DAKE 6-275 75-TON H-FRAME SHOP PRESS S/N 173528	🔒 Subscribe
	HEGENSCHEIDT	7925 SR3000	HEGENSCHEIDT 7925 SR3000 TUBE SKIVING AND FINISHING MACHINE, S/N NA, 1.75" MIN WORKPIECE BORE , 11.5" MAX WORKPIECE BORE , 12" CENTER HEIGHT, 120" MAX WORKPIECE LENGTH, 200 IN/MIN RAPID TRAVERSE, 75-1200 RPM, .024-.138 IN/REV FEED RATES, 40 HP, AUTOMATIC CYCLING, 2-SPEED GEARED HEADSTOCK, COOLANT INDUCTION UNIT, CHUCK & CENTERING TAILSTOCK, PENDANT CONTROL COOLANT SYSTEM W/ FORCE MONITOR, HIGH PRESSURE COOLANT PUMP, 28" X 126" T-SLOTTED WORK FIXTURE BAD, TAILSTOCK POSITION, WORK SUPPORTS. MISC. TOOLING	🔒 Subscribe
	ELDORADO	MEGA M-75-1061	ELDORADO MEGA M-75-1061 3/4" X 15" PRECISION DEEP HOLE GUN DRILL, S/N 858, 6" JAW CHUCK, PNEUMATIC CLAMPING FIXTURES, MEGA F-18-1101-1 HIGH PRESSURE COOLANT	🔒 Subscribe
	CALDWELL	20S-20-10	2020 CALDWELL 20S-20-10 SPREADER BAR, S/N 06-77909, 20 TON CAPACITY, 126" TOTAL LENGTH	🔒 Subscribe
	BARBER COLMAN	16-16 MULTICYCLE	[BARBER COLMAN NO. 16-16 MULTICYCLE GEAR HOBBING MACHINE] 16" MAX RATED WORK DIA, 6 DP - MAX DP AND DIA IN STEEL, 5 MAX RATE HOB DIA, 16 MAX TRAVEL OF HOB CARRIAGE, 44 MAX DISTANCE WORK SPINDLE FACE TO TAIL CENTER, 4.125 DIA OF WORK SPINDLE BORE, 45 DEGREE MAX HOB SWIVEL ANGLE SETTING, 1.25 HOB ARBOR DIA, 425 RPM MAX HOB SPEED, .5 MAX VERTICAL FEED DISTANCE, .875 MAX TOTAL VERTICAL DISTANCE, 7.5 HP, 3/60/460V ELECTRICAL, STANDARD OPERATION OR HYDRAULIC MULTICYCLE WITH PLUNGE OR SQUARE CYCLE, WORKSLIDE POWER CLAMPING, GOOSE-NECK HOB HEAD, DOUBLE THREAD INDEX, CHANGE GEARS, LEVER OPERATED TAILSTOCK, AUTOMATIC LUBRICATION SYSTEM, MD COOLANT SYSTEM S/N: 4569	🔒 Subscribe
	PRAB	SMD-12A	PRAB SMD-12A 12" METAL TURNINGS SHREDDER, BLADE WIDTH 12", SHREDDER MOTOR 5HP, AUGER MOTOR .5 HP, DISCHARGE HEIGHT 15", HOPPER OPENING 30 X 38, AUGER DIAMETER 10, AUGER LENGTH 48, EQUIPPED W/ 30 X 38 FEED HOPPER, PRAB GRDF AUGER CONVEYOR, SMD-12A ROTARY BLADE SHREDDER, GRAVITY DISCHARGE	🔒 Subscribe
	BARBER COLMAN / PFAUTER		HEAVY DUTY CABINET W/ SLIDE-OUT DRAWERS W/ ASSORTED BARBER COLMAN AND PFAUTER CHANGE GEARS	🔒 Subscribe
	CINCINNATI MILACRON	340-20	CINCINNATI MILACRON 340-20 TWIN-GRIP GRINDING WHEEL HUB	🔒 Subscribe
	TAYLOR	RIGGER SPECIAL	COUNTERWEIGHT FOR TAYLOR RIGGER SPECIAL FORKLIFT, APPROX. 10,000 LBS.	🔒 Subscribe
	COLLINS	66A THREAD-O-MATIC	COLLINS 66A THREAD-O-MATIC THREADING MACHINE, S/N 6602, 6" MAX PIPE DIA, 4-SPEED, 3-STATION PUSH BUTTON SWITCH	🔒 Subscribe
	HYSTER	S150	HYSTER S150 COUNTERWEIGHT, 1543 LBS.	🔒 Subscribe
2011	CHICAGO PNEUMATIC	QRS30 HP UL	2011 CHICAGO PNEUMATIC QRS30 HP UL ROTARY SCREW AIR COMPRESSOR, S/N CAI5115898, 30 HP, 97.5 CFM, 132 PSI MAX OPERATING PRESSURE, 132 GALLON TANK, CONTINUOUS DUTY CYCLE	🔒 Subscribe
	POWER BOSS	PHOENIX 3030	POWER BOSS PHOENIX 3030 WALK BEHIND VACUUM FLOOR SCRUBBER S/N: 18100355(2) 15" SCRUB BRUSHES, 30" SCRUB PATH, 3/4 HP BRUSH MOTOR, 180 RPM, 30 GALLON SOLUTION CAPACITY, 30 GALLON RECOVERY CAPACITY	🔒 Subscribe
	POREBA	TR-100B1	POREBA TR-100B1 LATHE MOTORIZED BORING TAILSTOCK	🔒 Subscribe
	KIRA	VTC30E	KIRA VTC30E CNC DRILLING AND TAPPING CENTER W/ FANUC 21M CONTROL, TRAVELS: 11.8"X, 9.8"Y, 11.8"Z, 11.8" X 19.6" TABLE, 7.9"-19.6" MIN/MAX DISTANCE FROM SPINDLE TO TABLE, 220 LBS. MAX TABLE CAPACITY, 118"/MIN RAPIDS, 240-8000 IMP SPINDLE SPEEDS, 5 HP SPINDLE DRIVE, BT30 SPINDLE TAPER, 10-POSITION TURRET, COOLANT PUMP AND TANK W/ SKIMMER S/N: NA	🔒 Subscribe
2008	TRUMPF	TRUMARK STATION 7000	2008 TRUMPF TRUMARK STATION 7000 LASER MARKING MACHINE, S/N E0852A0169, MAX. WORK PIECE LENGTH 37.7, MAX. WORK PIECE HEIGHT 17.7, MAX. WORK PIECE DEPTH 14.7, MAX. WORK PIECE WEIGHT IN ROTARY 110 LBS., MAX. Z-AXIS TRAVEL 21.6, MAX. X-AXIS TRAVEL 25.5, RAPID TRAVERSE (X, Y, Z) 6,000 IPM, LASER 5 WATT, PULSE DURATION 3-200 NS, WAVELENGTH 1,0645 NM, 3-AXIS POSITIONING, AUXILIARY 4TH ROTARY FOR MARKING ROUND PARTS	🔒 Subscribe
	HARRISON	ALPHA 400	[HARRISON ALPHA 400 GAP BED-FLAT COMBINATION CNC TEACH LATHE] S/N A30036, GE FANUC ALPHA CNC CONTROL, 15.8" SWING OVER BED, 23" SWING IN GAP, 6.5" GAP WIDTH FROM FACEPLATE, 9.6" SWING OVER CROSS SLIDE, 10" 3-JAW CHUCK, 50" CENTERS, D1-6 SPINDLE NOSE, 2.1" SPINDLE BORE, 15-2500 RPM SPINDLE SPEEDS, THREADING, 240 IPM X/Z RAPID TRAVERSE, DORIAN NVIT8-100 8-POS TURRET, REMOVABLE GAP	🔒 Subscribe
	WTO	NZX2500Y	2 WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER	🔒 Subscribe
2001	FORD	F-150	2001 FORD F-150 XLT CREW CAB PICKUP TRUCK TRITON V8, RUNNING BOARDS, BED COVER, APPROX. 196,000 MILES, (ODOMETER MALFUNCTIONS ONLY SHOWING MILEAGE OCCASIONALLY) S/N: 1FTRW08L61KF59983	🔒 Subscribe
	MORI SEIKI	NZX2500Y	(3) WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER	🔒 Subscribe
			PALLET COMPRISING ASSORTED VARIABLE FREQUENCY DRIVES, MISC. MACHINE BOARDS, DISCONNECT SWITCH AND BUS BAR SAFETY SWITCH	🔒 Subscribe
	KIWA	KNH-400	KIWA KNH-400 HORIZONTAL MACHINING CENTER, S/N PB6120R, FANUC 18IM CONTROL, TRAVELS: 23.6"X, 23.6"Y, 19.8"Z, 15.8 X 15.8 PALLET SIZE, 880 LBS. PALLET CAPACITY, 1 PALLET INDEXING (B-AXIS), RAPID FEEDRATE: X-1968 IPM, Y-1968 IPM, Z-1968 IPM, 10,000 RPM SPINDLE SPEED, CAT 40, 120-ATC, 25 HP MAIN MOTOR, MARPOSS PROBING, FULL CONTOURING 4H-AXIS, THRU-SPINDLE COOLANT, COOLANT SYSTEM W/ CHIP CONVEYOR, OIL CHILLER, MIST	🔒 Subscribe
	BARBER COLMAN	NO. 6-16 MULTICYCLE	[BARBER COLMAN] NO. 6-16 MULTICYCLE GEAR HOBBING MACHINE, S/N 5364, 16 DP-2"/ 48 DP-6" MAX DO & DISTANCE, 6" MAX WORK RATED , 16.5" MAX TRAVEL OF HOB SLIDE, 21.7" MAX DISTANCE WORK SPINDLE FACE TO TAIL CENTER, 18.7" MAX DISTANCE WORK SPINDLE FACE TO C/L OF HOB SPINDLE, 3-1/8" DISTANCE C/L TO WORK SPINDLE TO C/L OF HOB SPINDLE, 3" DISTANCE C/L OF WORK SPINDLE TO BOTTOM OF OVERARM, 3" MAX HOB 60 R- 90 L MAX SWIVEL ANGLE, 3/4" HOB ARBOR, 200-800 RPM HOB SPEED RANGE, 0.015"-0.15" FEED RANGE, 0.010" -0.250" VERTICAL FEED RANGE DEPTH OF CUT, TRIPLE THREAD INDEX, POWER RAPID TRAVERS, AUTOMATIC HOB SHIFTER	🔒 Subscribe
	GLEASON	#12	GLEASON #12 STRAIGHT BEVEL GEAR GENERATOR, S/N 18450	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I 1.5 HP VERTICAL MILL, 9" X 42" POWER FEED TABLE S/N: 140499	🔒 Subscribe

ROYAL MASTER TG-12X3

METALWORKING & FABRICATION EQUIPMENT

[ROYAL MASTER TG-12X3] PRECIS-O-MATIC CENTERLESS GRINDER, S/N 1742, GRINDING CAPACITY DIAMETER .004 ...

Hammer Price: 🔒

2011 TSCHUDIN HTG310

METALWORKING & FABRICATION EQUIPMENT

2011 TSCHUDIN HTG310 11.8" X 13.3" UNIVERSAL CYLINDRICAL GRINDER, S/N 1105, GRINDING DIAMETER 11.8",...

Hammer Price: 🔒

MARVEL SERIES 8 MARK II

WOODWORKING EQUIPMENT

MARVEL SERIES 8 MARK II VERTICAL BANDSAW, TILTING HEAD, POWER FEED, WORK VISE, COOLANT SYSTEM, CHIP ...

Hammer Price: 🔒

EITEL RP-160

PRESSES & FORMING

EITEL RP-160 STRAIGHTENING PRESS, 175 TON, 79" X 10.75" STRAIGHTENING BED, 279" BED WIDTH EXTENSIONS...

Hammer Price: 🔒

EITEL RP-200

PRESSES & FORMING

[EITEL] [RP-200] STRAIGHTENING PRESS, S/N 14195, 220 TON, 59.87" X 10.75" STRAIGHTENING BED, 55" LEN...

Hammer Price: 🔒

ELDORADO MEGA M-75-1041

METALWORKING & FABRICATION EQUIPMENT

ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1641, 0.75" MAX DRILLING , 0.0...

Hammer Price: 🔒

TOYOTA 52-6FGCU45

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOYOTA 52-6FGCU45 10,000 LB LP FORKLIFT, SIDE SHIFT, THREE-STAGE MAST, SOLID TIRE, OVERHEAD PROTECTI...

Hammer Price: 🔒

BRUTE BM15

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BRUTE HEAVY LIFT BM15 FORKLIFT BOOM ATTACHMENT, 15,000 LB. MAX CAPACITY, 76" MAX REACH S/N: 1930...

Hammer Price: 🔒

ELDORADO MEGA M-75-1041

METALWORKING & FABRICATION EQUIPMENT

ELDORADO MEGA M-75-1041 3/4" X 30" PRECISION DEEP HOLE GUN DRILL, S/N 1107, 0.75" MAX DRILLING , 0.0...

Hammer Price: 🔒

RUSH FC 500D

METALWORKING & FABRICATION EQUIPMENT

RUSH FC 500D PCD, CARBIDE, & HSS TOOL GRINDER, S/N RF-9024, 0"-.0315" GRINDING TIP RADII, 0.118"-1.0...

Hammer Price: 🔒

2007 SUNNEN SV-310

METALWORKING & FABRICATION EQUIPMENT

2007 SUNNEN SV-310 VERTICAL HONING MACHINE, S/N 1F1-1011, 3/4"-8" ID RANGE, 28" MAX. WORKPIECE LENGT...

Hammer Price: 🔒

HEM TWISTER

WOODWORKING EQUIPMENT

HEM TWISTER 14" X 20" AUTOMATIC PIVOT MITERING PRODUCTION BAND SAW S/N: 704499 CAPACITIES: 14" X 20"...

Hammer Price: 🔒

HYD-MECH H-26

WOODWORKING EQUIPMENT

HYD-MECH H-26 26" X 26" DUAL POST HORIZONTAL BAND SAW, S/N NA, 90 RECTANGLE (H X W) 26" X 26", CAPAC...

Hammer Price: 🔒

OKAMOTO ACC-124DX

METALWORKING & FABRICATION EQUIPMENT

12" X 24" PROGRAMMABLE HIGH-PRECISION SURFACE GRINDER, NOMINAL GRINDING CAPACITY 12" X 24", MAXIMUM ...

Hammer Price: 🔒

CLAUSING COLCHESTER 17

METALWORKING & FABRICATION EQUIPMENT

CLAUSING COLCHESTER 17" X 40" ENGINE LATHE, S/N 7/0217/16636DD, 28" SWING OVER GAP, 3.1" HOLE THRU S...

Hammer Price: 🔒

OKAMOTO IGM-2M

METALWORKING & FABRICATION EQUIPMENT

[OKAMOTO IGM-2M] MICRO PROCESSOR CONTROLLED INTERNAL GRINDER, S/N 11574, MAXIMUM TO BE GROUND 0.23-7...

Hammer Price: 🔒

TECHNIDRILL/TRIAD 148-1.0-15-1CR

METALWORKING & FABRICATION EQUIPMENT

2006 TECHNIDRILL/TRIAD 148-1.0-15-1CR 1" X 48" COUNTER ROTATING DEEP HOLE DRILL S/N: 7033-6/91, DRIL...

Hammer Price: 🔒

YALE MR040ACNM24TE095

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

YALE MR040ACNM24TE095 4,000 LB. ELECTRIC STAND-UP REACH FORKLIFT, S/N A815N03124T, THREE-STAGE MAST,...

Hammer Price: 🔒

BRIDGEPORT SERIES I

CNC MACHINE CENTERS

2 HP BRIDGEPORT SERIES I VERTICAL MILL, S/N 245516, 9" X 48" POWER FEED TABLE, (3) T-SLOTS, 32.5" X,...

Hammer Price: 🔒

OSTER 716 6"

METALWORKING & FABRICATION EQUIPMENT

OSTER 716 6" PIPE AND BOLT THREADING MACHINE, S/N NA, STANDARD PIPE RANGE 1" - 6", STANDARD BOLT RAN...

Hammer Price: 🔒

2012 NEW DIMENSION 6500 N0E

METALWORKING & FABRICATION EQUIPMENT

2012 NEW DIMENSION 6500 N0E 1/2" X 6' POWER BENDING ROLLS, S/N 12123012, 6' LENGTH, 1/2" MAX. SHEET ...

Hammer Price: 🔒

UNKNOWN

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

UNKNOWN MAKE HEAVY DUTY FORKLIFT BOOM, APPROX. 35,000 LB. CAPACITY, 6' MAX REACH S/N: NA...

Hammer Price: 🔒

SKYJACK SJIII 3219

CONSTRUCTION EQUIPMENT

SKYJACK SJIII 3219 SCISSOR LIFT, 19' MAX PLATFORM HEIGHT, 35.44" DECK EXTENSION, 25' MAX WORKING HEI...

Hammer Price: 🔒

2013 BACE V63HD

MISC

2013 BACE V63HD VERTICAL BALER, S/N V63HD1504597, 60" X 30" X 48" H NOMINAL BALE SIZE, 1,100 LBS. MA...

Hammer Price: 🔒

2013 NICHOLS BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE

CNC MACHINE CENTERS

2013 NICHOLS BIG TWIN BELDEN CNC DUPLEX MILLING MACHINE, S/N 1358A, ALLEN BRADLEY MICROLOGIX PLC CON...

Hammer Price: 🔒

DAKE 6-275

PRESSES & FORMING

DAKE 6-275 75-TON H-FRAME SHOP PRESS S/N 173528...

Hammer Price: 🔒

HEGENSCHEIDT 7925 SR3000

METALWORKING & FABRICATION EQUIPMENT

HEGENSCHEIDT 7925 SR3000 TUBE SKIVING AND FINISHING MACHINE, S/N NA, 1.75" MIN WORKPIECE BORE , 11.5...

Hammer Price: 🔒

ELDORADO MEGA M-75-1061

METALWORKING & FABRICATION EQUIPMENT

ELDORADO MEGA M-75-1061 3/4" X 15" PRECISION DEEP HOLE GUN DRILL, S/N 858, 6" JAW CHUCK, PNEUMATIC C...

Hammer Price: 🔒

CALDWELL 20S-20-10

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2020 CALDWELL 20S-20-10 SPREADER BAR, S/N 06-77909, 20 TON CAPACITY, 126" TOTAL LENGTH...

Hammer Price: 🔒

BARBER COLMAN 16-16 MULTICYCLE

METALWORKING & FABRICATION EQUIPMENT

[BARBER COLMAN NO. 16-16 MULTICYCLE GEAR HOBBING MACHINE] 16" MAX RATED WORK DIA, 6 DP - MAX DP AND ...

Hammer Price: 🔒

PRAB SMD-12A

DUST COLLECTION EQUIPMENT

PRAB SMD-12A 12" METAL TURNINGS SHREDDER, BLADE WIDTH 12", SHREDDER MOTOR 5HP, AUGER MOTOR .5 HP, DI...

Hammer Price: 🔒

BARBER COLMAN / PFAUTER

METALWORKING & FABRICATION EQUIPMENT

HEAVY DUTY CABINET W/ SLIDE-OUT DRAWERS W/ ASSORTED BARBER COLMAN AND PFAUTER CHANGE GEARS...

Hammer Price: 🔒

CINCINNATI MILACRON 340-20

METALWORKING & FABRICATION EQUIPMENT

CINCINNATI MILACRON 340-20 TWIN-GRIP GRINDING WHEEL HUB...

Hammer Price: 🔒

TAYLOR RIGGER SPECIAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

COUNTERWEIGHT FOR TAYLOR RIGGER SPECIAL FORKLIFT, APPROX. 10,000 LBS....

Hammer Price: 🔒

COLLINS 66A THREAD-O-MATIC

METALWORKING & FABRICATION EQUIPMENT

COLLINS 66A THREAD-O-MATIC THREADING MACHINE, S/N 6602, 6" MAX PIPE DIA, 4-SPEED, 3-STATION PUSH BU...

Hammer Price: 🔒

HYSTER S150

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HYSTER S150 COUNTERWEIGHT, 1543 LBS....

Hammer Price: 🔒

2011 CHICAGO PNEUMATIC QRS30 HP UL

AIR COMPRESSORS

2011 CHICAGO PNEUMATIC QRS30 HP UL ROTARY SCREW AIR COMPRESSOR, S/N CAI5115898, 30 HP, 97.5 CFM, 132...

Hammer Price: 🔒

POWER BOSS PHOENIX 3030

MISC

POWER BOSS PHOENIX 3030 WALK BEHIND VACUUM FLOOR SCRUBBER S/N: 18100355(2) 15" SCRUB BRUSHES, 30" SC...

Hammer Price: 🔒

POREBA TR-100B1

METALWORKING & FABRICATION EQUIPMENT

POREBA TR-100B1 LATHE MOTORIZED BORING TAILSTOCK...

Hammer Price: 🔒

KIRA VTC30E

CNC MACHINE CENTERS

KIRA VTC30E CNC DRILLING AND TAPPING CENTER W/ FANUC 21M CONTROL, TRAVELS: 11.8"X, 9.8"Y, 11.8"Z, 11...

Hammer Price: 🔒

2008 TRUMPF TRUMARK STATION 7000

LASER ETCHING & ENGRAVING EQUIPMENT

2008 TRUMPF TRUMARK STATION 7000 LASER MARKING MACHINE, S/N E0852A0169, MAX. WORK PIECE LENGTH 37.7,...

Hammer Price: 🔒

HARRISON ALPHA 400

METALWORKING & FABRICATION EQUIPMENT

[HARRISON ALPHA 400 GAP BED-FLAT COMBINATION CNC TEACH LATHE] S/N A30036, GE FANUC ALPHA CNC CONTROL...

Hammer Price: 🔒

WTO NZX2500Y

CNC MACHINE CENTERS

2 WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER...

Hammer Price: 🔒

2001 FORD F-150

TRUCKS, TRAILERS & VEHICLES

2001 FORD F-150 XLT CREW CAB PICKUP TRUCK TRITON V8, RUNNING BOARDS, BED COVER, APPROX. 196,000 MILE...

Hammer Price: 🔒

MORI SEIKI NZX2500Y

CNC MACHINE CENTERS

(3) WTO LIVE TOOL HOLDERS FOR MORI SEIKI NZX2500Y TURNING CENTER...

Hammer Price: 🔒

MISC

PALLET COMPRISING ASSORTED VARIABLE FREQUENCY DRIVES, MISC. MACHINE BOARDS, DISCONNECT SWITCH AND BU...

Hammer Price: 🔒

KIWA KNH-400

CNC MACHINE CENTERS

KIWA KNH-400 HORIZONTAL MACHINING CENTER, S/N PB6120R, FANUC 18IM CONTROL, TRAVELS: 23.6"X, 23.6"Y, ...

Hammer Price: 🔒

BARBER COLMAN NO. 6-16 MULTICYCLE

METALWORKING & FABRICATION EQUIPMENT

[BARBER COLMAN] NO. 6-16 MULTICYCLE GEAR HOBBING MACHINE, S/N 5364, 16 DP-2"/ 48 DP-6" MAX DO & DIST...

Hammer Price: 🔒

GLEASON #12

METALWORKING & FABRICATION EQUIPMENT

GLEASON #12 STRAIGHT BEVEL GEAR GENERATOR, S/N 18450...

Hammer Price: 🔒

BRIDGEPORT SERIES I

CNC MACHINE CENTERS

BRIDGEPORT SERIES I 1.5 HP VERTICAL MILL, 9" X 42" POWER FEED TABLE S/N: 140499...

Hammer Price: 🔒

<< Previous 1 2 3 4 5 ... 10 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Machinery Reconditioning and Warehousing Consolidation

Save to Project Folder

Print Options

Save to Project Folder