Online Timed Cannabis Equipment MultiLocation Consignment Auction Powered by A2C Auctions

1999 PRECISION STAINLESS FP1 FILTER PRESS. 1 CUFT MANUAL HYDRAULIC. FILTER AREA: 13.6 SQ. FT. AIR COMPRESSOR: 5 HP 20 CFM. CAPACITY OF 1 CUFT. OPERATING TEMPERATURE RANGE: -40C TO 37C. MAX FEED PRESSURE: 100 PSI. AVERAGE FLOW RATE (EST.): 2 GPM. PLATE SIZE: 470MM. FILTER, HEAD PLATE & TAIL PLATE MISSING, DOES NOT HAVE THE HEAD PLATE. CLOTH MATERIAL: POLYPROPYLENE.

2000 MILESTONE ETHOS X MICROWAVE TERPENE & FLAVONOID EXTRACTION. 12 LITER INTERNAL GLASS REACTOR. CAN USE FRESH, FROZEN OR DRY CANNABIS MATERIAL. SAMPLE AMOUNT UP TO 3 KG. TYPICAL EXTRACTION TIME LESS THAN 60-90 MINUTES. INTERNAL HEATING OF WATER WITHIN THE SAMPLE DISTENDS ITS CELLS AND LEADS TO RUPTURING OF THE GLANDS AND OLEIFEROUS RECEPTACLES. SELECTIVELY EXTRACTS THE TERPENES WITHOUT COMPROMISING THE SUBSEQUENT CANNABINOID EXTRACTION STEP. ELECTRICAL: 220-240 V, 3500 VA, 60 HZ.

USED ACTIONPAC ME-1095 WEIGH FILLER/PACKAGER. MODEL ME-10955CS0V. CAPACITY: TYPICALLY HANDLES 1 OZ TO 5 LBS PER FILL. DESIGNED TO PROVIDE PRECISE FILLS, WITH THE ABILITY TO HANDLE ACCURACY UP TO 1/100 OZ OR 1/10TH OF A GRAM. FEATURES A USER-FRIENDLY KEYPAD THAT CAN STORE UP TO 256 PRODUCT RECIPES FOR QUICK CHANGEOVERS. ELECTRICAL: 110V AC, 1-PHASE, 60 HZ, 3-5 AMPS.

LZM 200 LBS FLAT-TYPE CENTRIFUGE. MODEL PS100-N. BASKET DIAMETER: 1000 MM (APPROX. 39.4 INCHES). BASKET DEPTH: 400 MM. LOADING CAPACITY: ~200 LBS (90 KG - 100 KG) DEPENDING ON MATERIAL DENSITY. MAX SPEED: 1,200 - 1,500 RPM. CENTRIFUGAL FORCE: ~800 - 1,000 G. MOTOR POWER: 11 KW.

USED NANJING KINGREAT 110 LBS/50KG TOP DISCHARGE CENTRIFUGE FOR ETHANOL EXTRACTION. MODEL PPTD-50. CAPACITY (THROUGHPUT): 50 KG/HR. MAX LOAD (BIOMASS/BATCH): ~50 KG (APPROX. 110 LBS). BASKET DIAMETER: 600 MM (INTERNAL). BASKET HEIGHT: 300 MM. CAKE VOLUME: 40 LITERS. MOTOR POWER: 3.0 KW (APPROX. 4 HP). MAX SPEED: 1500 RPM. CENTRIFUGAL FORCE (G-FORCE): 756 X G.

2000 SPX WAUKESHA SS PISTON ROTARY POSITIVE DISPLACEMENT PUMP. MODEL 030 U1. CAPACITY: NOMINAL CAPACITY UP TO 36 GPM (8.2 M3/HR). PRESSURE: MAXIMUM PRESSURE 200 PSI (13.8 BAR). POWERED BY 2 HP BALDOR MOTOR. DISPLACEMENT: 0.060 GAL (0.227 LITER) PER REVOLUTION. PORTS: TYPICALLY 1.5" OR 2" NPT/CLAMP FITTINGS. MATERIAL: 316L STAINLESS STEEL BODY, COVER, AND SHAFT.

2018 GREENBROZ MODEL M DRY TRIMMING MACHINE. TRIM RATE: 8-12 POUNDS AN HOUR. TRIMMER TYPE: BOWL W/ BATCH FEED. BUILD: SURGICAL STAINLESS STEEL, FOOD-GRADE STAINLESS STEEL, HDPE. DIMENSIONS: 41.25" X 37.25" X 56". UL LISTED. SPEED: VARIABLE 1-25RPM WITH ADJUSTABLE DIAL & WHISPER QUIET MOTOR. FORWARD/REVERSE SWITCH.

COOLJARZ A-10 FILLER PRECISION CARTRIDGE FILLING MACHINE. MODEL A-10. SHOT-SIZE ACCURACY: 0.02 MILLILITERS / 0.02 GRAMS. OIL TANK CAPACITY: 1 LITER. FILL SIZE: 0.02 - 1.10 MILLILITERS. VOLTAGE: 110 VOLTS. POWER CABLE LENGTH: 3 FEET / 0.91 METERS.

USED LANTINI COMPLETE 24 COATING MACHINE W/ 8 RIB ASSEMBLY. 24 COATING BOWL WITH 8 RIBS (PRESSED IN- BUMPED). 180 GRIT FINISH FOR BOTH THE INSIDE AND OUTSIDE. CAPACITY: 150 L. OUTPUT: APPROX. 40 KGS. RUNNING SPEED: 0~45RPM. BASE: STAINLESS STEEL. INCLUDES 1HP MOTOR, ON/OFF SWITCH INVERTER, & SPEED REDUCER CONTROL BOX. POWER SOURCE: 230/480V/3PHASE/60HZ.

USED CORKEN E-91 OIL-FREE RECIPROCATING GAS COMPRESSOR. MAX WORKING PRESSURE: 335 PSIG. MAX BRAKE HORSE POWER: 7.5 KW. BORE OF CYLINDER: 3.0 INCH. STROKE: 2.5 INCH. PISTON DISPLACEMENT: MIN @ 400 RPM 4.1 (7.0) / MAX @ 825 RPM 8.4 (14.3). DESIGNED FOR BOTANICAL HYDROCARBON EXTRACTION (BUTANE/PROPANE).

USED PURE PRESSURE INDUSTRIAL ROSIN PRESS. MODEL LONGS PEAK. PROCESS UP TO 7 LB OF FLOWER PER DAY, OR 12+ LB OF SIFT OR HASH PER DAY. THE LONGS PEAK CAN PRESS 80 OR MORE GRAMS OF DRY SIFT OR HASH AT ONE TIME, OR 40+ GRAMS OF FLOWER. 8 TONS OF FORCE THE LONGS PEAK FEATURES AN 8 TON PNEUMATIC, OIL-LESS & MAINTENANCE-FREE CYLINDER FOR MAXIMUM THROUGHPUT AND CONTROL. 2X THE PROCESSING OUTPUT AND 60% MORE FORCE FOR INCREDIBLY CONSISTENT RESULTS AT HIGH VOLUME. SUPERIOR 10 X 3 HEAT PLATES OUR PREMIUM 6061 ALUMINUM HEAT PLATE ASSEMBLIES OFFER INDEPENDENT THERMOCOUPLES, 0F - 300F EVENLY DISTRIBUTED HEAT, AND TEMPERATURE ACCURACY TO 1 DEGREE. PRESSWARETM TECHNOLOGY EACH LONGS PEAK COMES WITH OUR INTUITIVE PRESSWARETM TECHNOLOGY, WHICH OFFERS A FULL COLOR LCD TOUCH SCREEN WITH CUSTOM SOFTWARE FOR UNPARALLELED CONSISTENCY AND CONTROL INCLUDING THE ABILITY TO SAVE UP TO 29 PRE-SET RECIPES.

STM CANNA PRE ROLL PACKAGE W/ MINI-ROCKETBOX STM-MRB-1 + STM REVOLUTION GRINDER. MODEL RV-STM-1. MINI-ROCKETBOX PLUS+ COMMERCIAL PRE-ROLL CONE FILLING MACHINE. MODEL STM-MRB-1 -143 PRE-ROLLED JOINTS IN 30-45 SECONDS -FILLS UP TO 1.2G VARIABLE ADJUSTABLE DIAL -10% +/- WEIGHT VARIANCE -LIFT PLATE -ADJUSTABLE TOP TRAY. STM REVOLUTION COMMERCIAL GRADE GRINDER. MODEL RV-STM-1 -GRINDS 15-30 LBS PER HOUR OF DRY FLOWER -CONTINUOUS FEED AUGER TIMER: AUGER TIMING & BLADE SPEED CONTROL-PROPRIETARY DUAL BLADE SYSTEM -INTERCHANGEABLE FINE & COARSE PARTICLE SCREENS FOR EXTRACTION & PRE-ROLLS -MINIMIZES TERPENE, CANNABINOID LOSS -AUTO-BLADE OSCILLATION CREATING SCISSOR-LIKE CUTS -SELF-REGULATING, CLOSED-LOOP SYSTEM TO PREVENT CLOGS W/ HOMOGENOUS & CONSISTENT PARTICLES

USED APEKS "TRANSFORMER" SUBCRITICAL & SUPERCRITICAL CO2 BOTANICAL EXTRACTION SYSTEM, MODEL 2000-20LD. 2000 PSI MAXIMUM PRESSURE. CLOSED LOOP SYSTEM RECOVERS 95% OF THE CO2, PROCESSES APPROXIMATELY 25-31 POUNDS OF DRIED, GROUND CANNABIS IN A 24 HOUR PERIOD. 160 DEGREES F MAXIMUM TEMPERATURE; HAMMER UNION CLOSURES; SPRING ENERGIZED CUP SEAL MECHANISM; INTEGRAL FILTERS ON CLOSURE HEADS (20 MICRON); INTERNAL K TYPE THERMOCOUPLE SENSES ACTUAL EXTRACTION TEMPERATURE; NON-ISOLABLE SPRING LOADED SAFETY RELIEF VALVE PREVENTS ACCIDENTAL OVER-PRESSURIZATION. CO2 RECIRCULATION PUMP; ELECTRIC MOTOR DRIVEN DIAPHRAGM COMPRESSOR; 1.0-2.1 KG/MIN FLOWRATE; HYDRAULICALLY ACTUATED DIAPHRAGM; ALL WETTED PARTS ARE 316 STAINLESS STEEL. SEPARATION MECHANISM; VALVELESS EXPANSION TECHNOLOGY (VET) FLOW PATH FROM EXTRACTOR TO 1ST SEPARATOR IS CONTINUOUS DIAMETER WITH NO CONSTRICTIONS. SEPARATION OCCURS IN 1ST SEPARATOR UTILIZING CENTRIFUGAL SEPARATION AND DEPRESSURIZATION. HEAT EXCHANGERS; 304 STAINLESS STEEL; 60F-140F SYSTEM OPERATIONAL RANGE. CONTROL SYSTEM; FULLY AUTOMATIC PROGRAMMABLE LOGIC CONTROLLER (PLC) TOUCH SCREEN INTERFACE WITH FIRST LEVEL SAFETY FUNCTIONALITY AND USER PROGRAMMABLE PRESSURE, TEMPERATURE AND TIME.

USED ADMIX ROTOSOLVER INTANK SANITARY HIGH SHEAR MIXER. MODEL ROTOSOLVER 132RS101SS. MIXING HEAD TIP SPEED = 59.9 FT/SEC. PUMPING CAPACITY, WATER = 3,490.9 L/MIN. PUMPING CAPACITY, PRODUCT = 3,463.6 L/MIN. TANK TURNS PER MINUTE = 30.5. MIXER: 10 HP, 3450 RPM, 3/60/230/460V, ALL TYPE-304 STAINLESS STEEL, PHARMACEUTICAL GRADE, WASHDOWNDUTY, AIR COOLED (TECAC) MOTOR, INVERTER DUTY RATED FOR 10:1 TURNDOWN. MIXING INTENSITY, PRODUCT = 36.8. MINIMUM BATCH VOLUME = 65 LITERS.

2023 GREENBROZ 215 PRECISION SORTER. CAPACITY: PROCESS 90 LBS PER HOUR. INCREASE YOUR OPERATION'S EFFICIENCY WITHOUT DAMAGING YOUR FLOWER. 60X FASTER THAN HAND SORTING. ORGANIZE YOUR CANNABIS INTO DIFFERENT SIZES AT LIGHTING SPEED. 3 CUSTOMIZE SORTING SIZE. ADJUSTABLE SORTING BANDS ALLOW YOU TO TAILOR EACH BATCH TO YOUR SPECIFICATIONS. HMI DIGITAL USER INTERFACE. INTUITIVE TOUCHSCREEN PUTS YOU IN TOTAL CONTROL OF YOUR SORTING SPEED. USE LARGE AND MID-SIZE BUDS IN YOUR BAGS. TURN YOUR SMALLS AND LARF INTO PRE-ROLLS OR PROCESS THEM INTO EXTRACTS.

20000ML EVAPORATING FLASK CAPACITY: 50L, 10000ML RECEIVING FLASK CAPACITY: 20L BVV NEOCISION ETL LAB CERTIFIED ROTARY EVAPORATOR TURNKEY SYSTEM W/ CHILLER VAC PUMP & DIGIVAC. ROTATION SPEED 0-120 RPM, MAXIMUM VACUUM PRESSURE -29.8 INHG, OPTIMUM AMBIENT TEMPERATURE 5~25C / 41~105.8F, GLASS MATERIAL GG-17 HIGH BOROSILICATE. INCLUDES POLYSCIENCE DURACHILL 1.5 HP CHILLER. MODEL 6860T56BV50D. INCLUDES VACUUBRAND VACUUM PUMP. MODEL MD 4C NT. INCLUDES DIGIVAC VAPOR PRESSURE CONTROL UNIT. POWER (V/HZ) 220-240V 60HZ SINGLE PHASE.

USED STM ROCKETBOX 2.0 FOR AUTOMATED CRAFTING OF PRE-ROLLS, MODEL RB 2.0. CAPABLE OF 453 PRE-ROLLS PER 3 MIN CYCLE (25,000 PER DAY). COMPATIBLE WITH 84, 98 AND 109 MM CONES. PROPRIETARY SMART DENSITY SOFTWARE TO MEASURE & ACHIEVE WEIGHT ACCURACY. INCLUDED ACCESSORIES: FILLERTRAY, (2) 98MMCONETRAY, (1) 109MMCONETRAY, (3) FINISHINGTRAYS & ASSORTED REPLACEMENT PARTS.

HYDRION SCIENTIFIC ROTARY EVAPORATOR RE-520 WITH EDWARDS RV8 VACUUM PUMP AND CHILLER. EVAPORATION RATE: 0-5 L/HR. SPEED RANGE: 20-120 RPM. WORKING TEMPERATURE: RT-200 C. ROTARY VESSEL VOLUME: 10 L. INCLUDES EDWARDS RV8 ROTARY VACUUM PUMP. COLLECTION VESSEL VOLUME: 5 L. LIFTING STROKE: 0-180 MM.

100 L ELECTRIC JACKETED GLASS REACTOR. REACTION GLASS VESSEL CAPACITY 26 GALLONS (100 L). ROTATION SPEED: 50 TO 500 RPM. TEMPERATURE RANGE -110 DEGREES F TO 400 DEGREES F. VACUUM LEVEL: < 700 TORRS. GLASS MATERIAL: HIGH BOROSILICATE GLASS 3.3. MAXIMUM JACKET PRESSURE 4.4 PSI OR 0.03 MPA. DRAIN VALVE: FLUSH SEAL DESIGN WITH LARGE OPENING AND FLAT FLANGE CLAMP. DRAIN PORT GROUND CLEARANCE 12.5 INCHES. ELECTRICAL 110V 60HZ OR 220V 50/60HZ, 1-PHASE, 140W.

LOT OF (2) NEW/UNUSED AGILENT IDP-3 DRY SCROLL PUMPS & (1) AGILENT IDP-7 DRY SCROLL PUMPS. MODEL IDP-3, MODEL IDP-7

2014 KOHLER 57 KW STANDBY NATURAL GAS GENERATOR W/ OUTDOOR ENCLOSURE. MODEL 60RCL-QS. HOURS: 413.1 HRS. RATING: 57 KW / 57 KVA. VOLTAGE: 240 VOLT. AMPS: 238A. PHASE: SINGLE PHASE. RUNS ON PROPANE (LP) OR NATURAL GAS. OUTDOOR ENCLOSURE.

USED AI RAPIDCHILL 26 CF -86C ULTRA-LOW TEMP UPRIGHT FREEZER. TEMPERATURE RANGE: -40C TO -86C. TIME FROM AMBIENT TO -86C: 5 HOURS. UNIFORMITY: 4C. TIME FROM -86C TO -50C WITH DOOR CLOSE (AMBIENT 25C): 5 HOURS. 1 MIN DOOR OPEN RECOVERY TIME (AMBIENT 25C, RUNNING TEMP -75C): 30 MINS. SHELVING: 3 (4 COMPARTMENTS), FULLY ADJUSTABLE. DIMENSIONS: 29.5 X 26.7" (WXD). MAX. LOAD CAPACITY: 200 LBS. UL CERTIFIED. ELECTRICAL: 110V, 60 HZ, SINGLE PHASE, 1000 WATTS.

USED DIME WATER WHOLE HOUSE R/O SYSTEM - CAPACITY: 1 GAL PER MINUTE .....1.5-2G PER MINUTE WITH WARM WATER AND LOW TDS....1500-3000 GALLON PER DAY DEPENDING ON WATER TEMP AND TDS - EACH STAGE SEQUENTIALLY: AQUAFER PRE FILTRATION - CHLORINE REMOVAL, ANTI SCALE CAPACITY 2 BLUE FILTERS ARE PRE FILTER: - 5 MICRON FILTER (ANNUALLY) - CARBON BLOCK (ANNUALLY) HIGH PRESSURE PUMP (SMALLER PUMP) REVERSE OSMOSIS (1440 MEMBRANE) REMINERALIZATION CARTRIDGE/ALKALINE (MAGNESIUM OXIDE ONLY) (CAN USE TO CONTROL PH OR BYPASS) - THIS FLOWS INTO STORAGE TANK, AND THEN IT GOES BACK INTO THE SYSTEM FOR: - REPRESSURE PUMP (LARGER PUMP, CENTER AND RIGHT) (75/LBS PER SQUARE INCH) - ULTRAVIOLET (UV BULB REPLACED ANNUALLY) - MAXI CURE 3000 UNIT FOR PRE TREATMENT. MEDIA USED IS BASED ON WATER ANALYSIS RESULTS. - R.O. UNIT WITH POLYAMIDE (TFC) MEMBRANE TECHNOLOGY. DESIGNED FOR 50% RECOVERY AND 98% REJECTION. - ROTARY VANE OR MULTI STAGE CENTRIFUGAL PRESSURE PUMP. - THREE PRESSURE GAUGES. - FLOW METERS FOR WASTE AND PRODUCT PRODUCTION. - HIGH AND LOW PRESSURE SAFETY SWITCHES.

USED ACROSS INTERNATIONAL -75C RECIRCULATING CHILLER W/ 30L/MIN CENTRIFUGAL PUMP. MODEL C80-10. CAPACITY: 10 LITERS OR 2.6 GALLONS. COOLING CAPACITY (ASSUMING WORKING ENVIRONMENT IS 25C OR 77F): @ -40C:2000W, @ -50C: 1500W, @ -60C: 1000W, @ -75C: 280W, @ -78C: 180W. TEMPERATURE RANGE: -40 TO -78 DEGREES C. REFRIGERANT: R404A, 268G AND R23, 740G. DIMENSIONS: 17.5 X 7 X 8.5 INCHES (LXWXH). ELECTRICAL: 220 V, 60 HZ, SINGLE PHASE, 27 AMPS, 4750 WATTS.

LOT OF (2) USED VOLLRATH 60-QUART HEAVY DUTY PLANETARY FLOOR MIXER. MODEL MIX1060. CAPACITY: 60-QUART STAINLESS STEEL BOWL. CONTROLS: 3-SPEED, 30-MINUTE TIMER WITH AUTOMATIC STOP. SAFETY: SAFETY CUT-SWITCH AND BOWL GUARD. POWER: 2 HP MOTOR, 16 AMPS, 208-240V, 60HZ, 1-PHASE

USED LEYBOLD TRIVAC D 65 B OIL SEALED VACUUM PUMP. MODEL D65B. PUMPING SPEED: 65 M3/H. ULTIMATE PRESSURE: 2 X 10-3 MBAR^4.

LOT OF (3) USED 27.2 GAL / 103 L VERTICAL 316L STAINLESS STEEL JACKETED TANKS. APPROXIMATE 20 INCH DIAMETER X 26 INCH STRAIGHT SIDE. DISHED REMOVABLE TOP HEAD, DISHED BOTTOM HEAD. 304L STAINLESS STEEL DIMPLE JACKET, RATED 100PSI AT -20 TO 250 DEGREES F. INTERNAL RATED 45PSI / FV AT -20 TO 250 DEGREES F. OPENINGS: (5) 3 INCH, (1) 1-1/2 INCH. (2) 1 INCH, 1-1/2 INCH CENTER BOTTOM OUTLET WITH APPROXIMATELY 8-10 INCH DISCHARGE HEIGHT. (4) INTERNAL BAFFLES. MOUNTED ON (4) LEGS WITH CASTERS. SERIAL# 6334-8, NATIONAL BOARD# 4620. USED AS FREEZE / THAW VESSEL.

USED SULLAIR 10 HP ROTARY SCREW AIR COMPRESSOR MODEL ST709RD. MAX. OPR. PRES. 135 PSI / 9.3 BAR. MAX. AMB TEMP. 104 F / 40 C. MIN. OPR. PRES. 125 PSI / 8.6 BAR. MIN. AMB TEMP. 40 F / 4 C. RELIEF PRES. 215 PSI / 14.8 BAR. MAX. OPR. TEMP. 235 F / 113 C. ELECTRICAL: 3520 RPM 230 VOLTS 60 HZ 3 PH 10.0 HP.

NEW/UNUSED CRYOMETRIX L-80 LITE CHILLER. CAN REACH -40C IN 8 MINUTES. -65C IN 15 MINS. -1 MINUTE FILL/DRAIN TIME. -CHILL DOWN TO TEMPERATURES AS LOW AS -80C -CHILL TO -40C IN 8 MINUTES -MODULAR DESIGN ALLOWS USER-INSTALLED UPGRADES -LIQUID NITROGEN (LN2) REQUIREMENTS: 125-150 PSI LN2 SUPPLY, 0.4 GAL LN2/ 1 GAL ETHANOL (AT -40C) -ELECTRICAL REQUIREMENTS: 120VAC 60HZ SINGLE PHASE

USED CENTURION PRO DRY BATCH TRIMMER. MODEL 4. PROCESSING CAPACITY (PER HOUR) DRY: 108 LBS/ 49 KG. TUMBLER DIAMETER 20 INCH / 51CM. TUMBLER LENGTH 66 INCH / 168CM. MOTOR: 1/4 HP. NUMBER OF TUMBLERS 1. ELECTRICAL: 3 AMP - 110V NA

LOT OF (6) USED BECKMAN COULTER MET ONE 3400 PORTABLE AIR PARTICLE COUNTER. SPECS & FEATURES: - (6) UNITS INCLUDED -SAMPLE AND HOLD TIMES SAMPLE: 00:00:01 TO 23:59:59 HOLD: 00:00:00 TO 23:59:59 -COUNT CYCLES UP TO 100 WHILE IN AUTOMATIC MODE -LOCATIONS UP TO 999 -EXHAUST PORT 3/8-IN. NPT THREAD -PUMP TYPE AIR VACUUM, RATED FOR CONTINUOUS USE -LIGHT SOURCE LONG LIFE LASERTM DIODE WITH 10-YEAR MEAN TIME TO FAILURE (MTTF), CLASS 3B LASER, 810 TO 852 NM, 50 MW MAXIMUM -POWER: 100-240 VAC, 2.5 A, 50-60 HZ

VACUUM PUMPS: ACROSS INTERNATIONAL VACUUM PUMP. MODEL SUPERVAC-11C, ACROSS INTERNATIONAL VACUUM PUMP. MODEL SUPERVAC-5C, ACROSS INTERNATIONAL VACUUM PUMP. MODEL SUPERVAC-21C, VACUUBRAND VACUUM PUMP. MODEL PC3001 VARIO SELECT, (3) VACUUBRAND VACUUM PUMP. MODEL RZ 2.5, AGILENT DRY SCROLL PUMP. MODEL IDP15, AGILENT CDU DIFFUSION PUMP. MODEL L970303, WELCH VACUUM PUMP. MODEL 2163B-01, WELCH DIAPHRAGM PUMP. MODEL 2034B-01, WELCH C/RV PRO16 PUMP. MODEL 3166E-01. CHILLERS/ HEATERS: POLYSTAT/COLE-PARMER BATH CHILLER/HEATER. MODEL AD07H200-C11B, POLYSTAT/COLE-PARMER BATH (CHILLER/HEATER) 212111800 1129622201180604, POLYSTAT/COLE-PARMER BATH (CHILLER/HEATER) 212331800 1129345101171212, POLYSCIENCE UNIT LS51TX1A110C 1804-02230. DIAMOND MINERS, CENTRIFUGES, COLUMNS ETC: BVV DIAMOND MINER SS304 02272023, COLE-PALMER INSTRUMENTS CENTRIFUGE 83058-0293, COLE-PALMER INSTRUMENTS CENTRIFUGE 83058-0276, (2) COLE-PALMER INSTRUMENTS BURNER/MIXER 04807-45 C1942161215949, MR HEI-TEC/HEIDOLPH BURNER/MIXER 505-30000-01-4 Z00197293-1218, (2) TALL METAL COLUMNS N/A N/A W/ CHILLER COIL, 3 OPENINGS ON TOP, PRECISION EXTRACTION SOLUTIONS COLUMN, HORN/STORK UNIT MODEL 126027, GRAINGER INTERNATIONAL STEP TRANSFORMER 30C522 ST-2000

LOT OF (5) USED QUEST DUAL OVERHEAD DEHUMIDIFIERS. MODEL 225. ENERGY FACTOR DUAL 225: 2.9 L/KWH, HIGH EFFICIENCY 225: 3.9 L/KWH. MAXIMUM CUBIC FEET PER MINUTE (CFM) DUAL 225: 526 CFM; HIGH-EFFICIENCY 225: 650 CFM. REFRIGERANT TYPE R-410A.

LOT OF (2) QUEST OVERHEAD DEHUMIDIFIERS. MODEL 506. CAPACITY 506 PINTS/DAY, @ 80 F | 60% RH. EFFICIENCY 8.1 PINTS/KWH. ELECTRICAL: SUPPLY VOLTAGE 220-240V CURRENT DRAW 11 AMPS. INCLUDES (2) QUEST CONTROLLERS.

USED EZ TRIM CANNABIS DEBUDDER BUD BUCKER. MODEL THE BUD BUCKER. CAPACITY: 80-150LBS PER HOUR TO FEED MULTIPLE TRIM MACHINES. PROTRUDED TIPS PRECISELY REMOVE BUDS FROM THEIR STEMS. 2 SETS OF 4 ENTRY HOLES ALLOW OPERATORS TO DOUBLE THEIR PRODUCTIVITY. CONTROL SPEED TO OPTIMIZE EFFICIENCY. REVERSE FUNCTIONALITY TO CLEAR OBSTRUCTED ENTRY HOLES. BUILT-IN FRONT, BACK, AND TOP SHELVES. POWER: 120 OR 240 VAC 60 HZ 3 PHASE.

USED MAYER PLANTING SYSTEMS CONTAINER / POT FILLING MACHINE. MODEL TM 2018. WORKING SPEED DEPENDS ON CONTAINER SIZE. SOIL HOPPER: 1.500 L. EXTENDED HOPPER: UP TO 4.000 L. POT SIZES: > 25 L. ALL-ROUNDER FOR FILLING ROUND OR SQUARE CONTAINERS AS WELL AS FOIL CONTAINERS/BAGS WITHOUT A DRILLING SYSTEM. FOR POTTING WORK WITH POT BALES AND BARE-ROOT PLANTS OF ALL KINDS. LENGTH/ WIDTH/ HEIGHT: 3000/ 1300/ 2000 MM. WORKING HEIGHT: CA. 85CM. ELECTRICAL: POWER CONNECTION: 400V/50HZ, 5-POLIG. POWER CONSUMPTION: 16 A. CONTROL VOLTAGE: 24 V DC. POWER INPUT: 3,2 KW.

2000 POPE SCIENTIFIC 2" WIPED FILM CANNA STILL DISTILLATION SYSTEM. MODEL 2" CANNA STILL. 2 INCH MOLECULAR STILL, COMPLETE WITH VARIABLE SPEED DRIVE MECHANISM. METAL BAND HEATER SET FOR 2 STAINLESS STEEL BODY, WITH HIGH TEMPERATURE CORDSET, J THERMOCOUPLE ASSEMBLY AND INSULATING JACKET, INSTALLED. TEMPERATURES UP TO 375C. SELF SUPPORTING STILL STAND, STAINLESS STEEL STILL BODY, STAINLESS STEEL INTERNAL CONDENSER, 1000 ML GLASS GRADUATED FEED AND DEGASSER FLASK WITH STOPPER, 1000 ML GLASS DISTILLATE RECEIVER FLASK, 1000 ML GLASS RESIDUE RECEIVER FLASK, TEFLON WIPER BLADES. POWER: 120 VAC 50/60 HZ.

LARGE HARVEST RIGHT HRFDL FREEZE DRYER. CAPACITY: 18 - 27 LBS PER BATCH. 1,107 SQUARE INCH OF TOTAL TRAY SPACE. FITS (6) TRAYS. CHAMBER APPROXIMATELY 15 INCH DIAMETER X 23 INCH DEEP. STAINLESS STEEL, TOUCH SCREEN CONTROL. ELECTRICAL 115V, 60HZ.

40" DIAMETER SINGLE DECK VIBRO-ENERGY ROUND SIFTER / SEPARATOR. MODEL MX40S88LKWC. POWERED BY 0.5 HP 3PH MOTOR. DESIGNED TO SEPARATE SOLIDS FROM LIQUIDS OR SEGREGATE DRY MATERIALS INTO UP TO FIVE DIFFERENT SIZES. 304 SS CONSTRUCTION.

USED ETS CLOSED-LOOP MINI MEP EXTRACTOR SYSTEM W/ MTA & HUBER CHILLER/HEATERS. MODEL HCU/C. CAPACITY: PROCESS UP TO 40 LBS EVERY 8 HOURS W/ MAXIMUM CAPACITY OF 10 LITERS OFFERING THE ABILITY TO PROCESS 5 LBS PER RUN. MINIMEP IS A VERSATILE HYDROCARBON EXTRACTION MACHINE OFFERING THE ABILITY TO PROCESS 1 LB. TO 5 LBS FOR THE CRUCIAL ITEMS ON YOUR CONCENTRATES LIST. EXTRACTING WITH PROPANE AND BUTANE CAN ACHIEVE MORE END PRODUCTS, WITH LESS POST PROCESSING. INCLUDES TAEEVO TECH M10 CHILLER, HUBER KISS E -CERTIFIED. THE MINIMEP MEETS OR EXCEEDS ALL INDUSTRY LISTED STANDARDS: ASME SECTION VIII, IFC, NFPA 58, 3-A SANITARY STANDARD, CLASS 1 DIVISION 1, NSF AND UL21

USED MTA TAEEVO TECH INDUSTRIAL WATER CHILLER. MODEL TAEEVO TECH 031 COOLING CAPACITY: 3.19 TONS BTU/HR: 38,280 BTU / HR TANK VOLUME: 30.4 GAL WATER FLOW: 4.1 TO 21.2 GPM REFRDIGERANT: R410A ELECTRICAL: 460 V / 3 PHASE / 60 HZ / 14 FLA

USED B/R INSTRUMENT FRACTIONAL CANNABIS OIL DISTILLATION SYSTEM. MODEL BR9200. SINGLE PASS UNRIVALED PURITY IN A SINGLE DISTILLATION. ACCOMPLISH WHAT IT TAKES OTHER SYSTEMS 3 OR MORE DISTILLATIONS TO DO. HIGH THROUGHPUT SYSTEMS WITH UP TO 500-1500 ML/HR. HIGH SEPARATING POWER 90-95% TOTAL ACTIVE CANNABINOIDS ON FIRST PASS. 99%+ EASILY ACHIEVE ABLE UPON FURTHER PROCESSING. NO DEGRADATION SPINNING BAND PRESERVES THE NATURAL OIL STRUCTURE AND NO ISOMERIZATION OR DEGRADATION OCCURS. OPERATED MANUALLY. LOT INCLUDES: WELCH VAC PUMP MODEL C/RV PRO 4. (2) HEATER/CHILLERS: ONE POLY SCIENCE AND ONE ACROSS INTERNATIONAL. ORIGINAL COLUMN. 1-2L BALL, 3, 4L BALL- ALL IN CLEAR BINS. COLD TRAP RECEIVERS. 2 - 20L BALLS. HEIDOLPH FLASK - 1 BIG 1 SMALL. 20L MANTEL. COLUMN HOLDER.

LOT OF (2) NEW/UNUSED HEIDOLPH HEI-TORQUE 200 PRECISION STIRRERS. MODEL HEI-TORQUE PRECISION 200. TORQUE MAX. 200 NCM. SPEED RANGE 102,000 RPM (ELECTRONIC CONTROL). VISCOSITY CAPACITY UP TO 100,000 MPAS. STIRRING VOLUME UP TO 50 L H2O. MOTOR POWER 120 W. NOISE LEVEL <50 DB & PROTECTION RATING IP54. CONNECTIVITY USB + RS-232 (FOR HEICONTROL). SAFETY FEATURES TOUCH PANEL, THERMAL CUTOFF. CHUCK SIZE 10.5 MM QUICK-ACTION.

USED PORTACOOL HIGH PERFORMANCE EVAPORATIVE COOLER. MODEL PACJS2701A1 COOLING: 5,625 SQFT CFM: 22,500 VELOCTIY: 26 MPH EATER: 65 GAL FAN BLADE: 48" DIMENSIONS: 90 X 78 X 36 HIGH-PERFORMANCE PORTABLE EVAPORATIVE COOLER DESIGNED FOR LARGE-SCALE, INDUSTRIAL-GRADE COOLING ELECTRICAL: 120 VAC, 60 HZ, 15.2 AMPS

LOT OF (2) LAB SOCIETY PRECISION BALANCE / SCALE, INDUSTRIAL PLATFORM, SCALES. MODEL LS-IP-3000EC. LOT OF (2) LAB SOCIETY PRECISION BALANCE / SCALES, BACKLIT LCD. MODEL LS-LC-224CN. LOT OF (2) CASCADE CM-54.I. 50G MOISTURE ANALYZERS. MODEL CS-180101010665

SUPREME AIR VENTURI FUME HOOD. MODEL 70. ACZET PRECISION SCALES. MODEL CZ1202N. ASSORTED LAB GLASS.

USED FC SCIENTIFIC MOLECULAR DISTILLATION STILL. MODEL MD-80B. CAPACITY: 2 L OF PRODUCT/DAY. EFFECTIVE EVAPORATION AREA: 0.1 M2. BARREL INSIDE DIAMETER: 80 MM. MAX RPM: 450. INCLUDES CHILLER & HEATER. ELECTRICAL: 120W, 220 V, 60 HZ.

USED ACROSS INTERNATIONAL 1.9 CF VACUUM OVEN W/ 5 SIDED HEATING. MODEL AT19 UL. CAPACITY: 1.9 CUBIC FOOT. TEMP RANGE: AMBIENT TO 250C (OR 480F) & UNIFORMITY: +/- 5% OF SETPOINT. CHAMBER SIZE: 16.5 X 14.5 X 14 INCH. ULTIMATE VACUUM LEVEL: BETTER THAN 500 MICRONS/MILLITORRS. MATERIAL: 316L SST. 250C UL CERTIFIED. ELECTRICAL.

100 L HORIZONTAL RIBBON MIXER. CAPACITY: 100 L. CAN BE USED FOR FOOD, DOUGH, DRY POWDER AND MORE. MOTOR POWER: 2.2 KW / 63 RPM. LOADING FACTOR: 0.6. CONSTRUCTED OF STAINLESS STEEL 316L. ELECTRICAL: 480 V / 60 HZ / 3 PHASE.

USED KANEBO TVIS-EX2 TABLET INSPECTION MACHINE. PROCESSING CAPACITY: CIRCULAR TABLETS 2000-3600 TABLETS/MIN. NON-CIRCULAR TABLETS 800-3000 TABLETS/MIN. TABLET SIZE: CIRCULAR SIZE: 5-12MM IN DIAMETER AND 2-8MM IN THICKNESS. NON-CIRCULAR TABLETS 5-12MM WIDTH, 2-8MM THICKNESS, 5-21MM LENGTH. APPLICABLE TABLETS: NON-COATED, FILM COATED, SUGAR COATED TABLETS. TABLETS WITH PRINTED MARK ON ONE OR BOTH SIDES, SCORED TABLETS, ENGRAVED TABLETS, CIRCULAR TABLETS, OTHER TYPE OF TABLETS(OBLONG, OVAL, ETC.). INSPECTED ITEMS: DIRT: FOREIGN MATTER, DIRT, SCRATCH. SHAPE: DIMENSIONS, CRACK, DEFORMATION. CHIP: CHIPPED EDGE. PRINTED MARK: SCRATCHY MARK, BLURRED MARK, NO MARK. COLOR: DIFFERENT COLOR, DISCOLORATION, BLOTCHES, PEELING OF COATING. INSPECTION AREA: FACE: 1 SIDE: 4. ACCURACY: DETECTION OF DEFECTS EQUIVALENT TO A 50UM SQUARE OR LATER BLACK SPECK. USES NIKON AF NIKKOR 50 MM LENS. PROCESS: TABLET FED TO THE HOPPER, ARE TRANSFERRED TO TEH FLOW CONTROL TURNTABLE BY THE VIBRATORY FEED. TABLETS ARE PROPERLY ALIGNED IN A SINGLE LINE AND SENT O THE INSPECTION SUBSYSTEM. AT THE INSPECTION SUBSYSTEM, TABLETS ARE TRANSFERRED BY THE DISC CONVEYOR UNIT TO PASS THROUGH SIDE-1/2 AND SIDE 3/4 LIGHTING UNITS FOR CIRCUMFERENTIAL SIDE INSPECTION; AND THROUGH FACE-1 AND FACE-3 LIGHTING UNITS BY THE 1ST AND 2ND BELT CONVEYOR UNITS FOR FACE AND BACK INSPECTION. WHILE EACH TABLET PASSES THROUGH LIGHTING UNITS, IMAGES ARE PROCESSED FOR INDIVIDUAL JUDGMENT AND INDIVIDUAL JUDGMENTS ARE THEN COMPLIED FOR OVERALL JUDGMENT. BASED ON THE OVERALL JUDGMENT, DEFECTIVE AND ACCEPTABLE TABLETS ARE AUTOMATICALLY SEPARATED BY THE REJECTOR UNIT. POWER SUPPLY: AC 200V 3-PHASE, 50/60 HZ. FOOTPRINT: 52X49X80"