CNC FOLDERS CNC PRESS BRAKES YODER ROLL FORMER SURPLUS DUE TO PLANT RECONFIGURATION

2009 SCHRODER FASTI MAK 4 EVOLUTION 3200/6.0 CNC FOLDING MACHINE S/N: 370005. CONTROL: SCHRODER POS3000 GRAPHIC NOTE: ALL AVAILABLE TOOLING INCLUDED WITH MACHINE. SPECIFICATIONS US STANDARD, METRIC MAX BENDING LENGTH: 127.55" 3,240 MM MAX. BENDING THICKNESS: 0.236" 6MM MAX. SPEED UPPER JAW UP/DOWN PER SEC.: 3.93 100MM MAX CLAMPING POWER OF UPPER JAW: 112 TONS 1000KN STROKE UPPER JAW: 33.5" 850MM MIN. BENDING WEB LENGTH ANGLE 90-150: 8X MATL. THICKNESS MIN. INTERIOR BENDING RADIUS: 1.5X MATL. THICKNESS MAX. INTERIOR BENDING RADIUS: 2X MATL. THICKNESS CLAMPING BEAM DRIVE POWER: (2) 12.5 HP MOTORS (2) 9.32 KW MOTORS CLAMPING BEAM SPEED: 3.9 IPS 99.06 MM/SEC FOLDING BEAM DRIVE POWER: (2) 12.5 HP MOTORS (2) 9.32 KW MOTORS MAX FOLDING BEAM SPEED: 150 /PER SEC. MAX FOLDING ANGLE: 150 FOLDING BEAM ADJUSTMENT: 7.1" 180.34MM FOLDING CENTER ADJUSTMENT: FOLDING CENTER ADJUSTMENT: 3.9" 99.06MM FOLDER AXIS: X,Y,Z,A,B, X, BACK STOP Y, BENDING BAR Z, UPPER BAR A, BENDING BAR LOWERING EQUIPPED WITH POS 3000 CNC 3-D GRAPHICS CONTROL ON SWIVEL ARM POS 3000 CNC 3-D GRAPHICS CONTROL ON SWIVEL ARM U-SHAPE FRONT GAUGING W/ 59" SQUARING ARMS U-SHAPE BACK GAUGE W/ 1498.60MM SQUARING ARMS WIRED 440 VOLTAGE WEIGHT: 34000 LBS 15400 KG OVERALL DIMENSIONS: MAIN UNIT APPROX 20 WIDE X 10 DEEP, TABLE IS 8 LONG X 127 WIDE"

2001 RAS 74.30 CNC FOLDING MACHINE S/N: 127/40. NOTE: ALL AVAILABLE TOOLING INCLUDED WITH THIS MACHINE. 126" X 9 GAUGE MAX CAPACITY RAS MULTIBEND 9001 CNC CONTROLS FACTORY SPECIFICATIONS: MAX. LENGTH OF FORMING : 125.98" BACK GAUGE 61 MAX. FORMING CAPACITY AT FULL LENGTH: 0.158" (9 GAUGE) MILD STEEL MIN. FLANGE HEIGHT: 6 X MATL. THICKNESS CLAMPING BEAM MAX. SPEED UP: 3.62 INCH/SEC CLAMPING BEAM MAX. SPEED DOWN: 1.57 INCH/SEC MAX. FOLDING SPEED: 74 INCH/SEC FOLDING ANGLE SETTING RANGE: 0-180 DEGREE CNC FOLDING BEAM STROKE: 3.15" CNC LOWER BEAM STROKE: 3.15" CLAMPING BEAM STROKE: 15.75 BACKGAUGE POSITIONING ACCURACY +/- .004 BACKGAUGE MAX. POSITIONING TIME: 3 SEC BACKGAUGE MIN. POSITION: .394 BACKGAUGE MAX. POSITION: 120 MAIN DRIVE MOTOR: 12 HP APPROXIMATE DIMENSIONS: 203 X 87.6 X 70 H MAIN UNIT 16 WIDE X 6 DEEP TABLE IS 7 LONG X 12 WIDE ESTIMATED WEIGHT: 13,000LBS ELECTRICS: 440 VOLT 3 PHASE 20.3 AMPS

1998 URSVIKEN PULLMAX OPTIMA 250 CNC PRESS BRAKE S/N: 4731. 12' X 275 TON, TONNAGE: 275 BENDING LENGTH: 145 BENDING LENGTH BETWEEN FRAMES: 124 BENDING STROKE LENGTH: 9.8 MAX DOWN SPEED: 215 IPM BENDING SPEED: 25 IPM RETURN SPEED: 283 IPM GAP/THROAT: 9.8 TOOL SPACE: 25.6 WORK HEIGHT: 38 CNC BACK GAUGE: MULTIPLE AXIS (SEE PHOTO) BACK GAUGE LENGTH: 36 CNC AUTO CROWNING LIGHT CURTAINS: FSG 900 ELECTRIC FOOT SWITCH HYDRAULICS: 40 GALLON EXTERNAL OIL COOLER HYDRAULIC PUMP: 12.4 GAL/MIN MAIN MOTOR: 30 HP CROWNING MOTOR: 2.4 HP ELECTRICS: 460V 3 PHASE, 50 AMP DIMENSIONS: 7 DEEP X 15 WIDE WITH LIGHT CURTAINS REMOVED. WEIGHT: 33070 POUNDS FLOOR FLUSH (NO PIT REQUIRED)

DONALDSON TORIT TRUNKLINE AT-3000 AMBIENT COLLECTION SYSTEM S/N: IG559127-002-1. NOMINAL AIRFLOW RANGE: 2,900 CFM, FILTER AREA: 636, NUMBER OF FILTERS: 4, ELECTRICS: 3HP 208-460 3-PHASE, APPROX DIMENSIONS: 50" X 45" X 98". ESTIMATED WEIGHT: 900 LBS

DONALDSON TORIT TRUNKLINE AT-3000 AMBIENT COLLECTION SYSTEM S/N: IG559127-002-1. NOMINAL AIRFLOW RANGE: 2,900 CFM, FILTER AREA: 636, NUMBER OF FILTERS: 4, ELECTRICS: 3HP 208-460 3-PHASE, APPROX DIMENSIONS: 50" X 45" X 98". ESTIMATED WEIGHT: 900 LBS

UPRIGHT X26N SCISSOR LIFT MAX PLATFORM HEIGHT: 26', MAX WORKING HEIGHT: 32.8', 126" X 28" PLATFORM, 750LB PLATFORM CAPACITY, 24V ELECTRICS, BATTERIES REPLACED 4/22 (NOT SHOWN IN PHOTOS), BUILT IN CHARGER, NON MARKING CUSHION TIRES, EST WEIGHT 5,200 LBS S/N: NA

YODER 15-STAND ROLL FORMING MACHINE. TOOLING IS NOT INCLUDED AND WILL BE REMOVED BY SELLER. APPROXIMATE DIMENSIONS 23 LONG X 9-6 WIDE

LARGE LOT OF ________ STEEL. 3/8" X 2-1/4" ASSORTED LENGTHS

CLARK C500 25WARDS FORK LIFT TRUCK, 2150 RATED LIFTING CAPACITY, 189" MAX LIFT, CUSHION TIRES, LPG LP POWERED, TRUCK WEIGHT 6,175 LBS, S/N: 235-78-2835

SURPLUS DUE TO THE INSTALLATION OF A NEW AUTOMATIC PANEL BENDING CELL. ALL CNC MACHINES CAN BE INSPECTED UNDER POWER BY APPOINTMENT ONLY.

1998 URSVIKEN PULLMAX OPTIMA 250 CNC PRESS BRAKE S/N: 4732. 12' X 275 TON, CYBLEC DNC 900 CONTROL TONNAGE: 275 BENDING LENGTH: 145 BENDING LENGTH BETWEEN FRAMES: 124 BENDING STROKE LENGTH: 9.8 MAX DOWN SPEED: 215 IPM BENDING SPEED: 25 IPM RETURN SPEED: 283 IPM GAP/THROAT: 9.8 TOOL SPACE: 25.6 WORK HEIGHT: 38 CNC BACK GAUGE: MULTIPLE AXIS (SEE PHOTOS) BACK GAUGE LENGTH: 36 CNC AUTO CROWNING LIGHT CURTAINS: FSG 900 ELECTRIC FOOT SWITCH HYDRAULICS: 40 GALLON EXTERNAL OIL COOLER HYDRAULIC PUMP: 12.4 GAL/MIN MAIN MOTOR: 30 HP CROWNING MOTOR: 2.4 HP ELECTRICS: 460V 3 PHASE, 50 AMP DIMENSIONS: 7 DEEP X 15 WIDE WITH LIGHT CURTAINS REMOVED WEIGHT: 33070 POUNDS FLOOR FLUSH (NO PIT REQUIRED)

ALL CNC MACHINES CAN BE INSPECTED UNDER POWER BY APPOINTMENT ONLY.

PRESS BRAKES