BiMonthly Open CNC Fab No Reserve Auction

2025 ATLAS COPCO GA37VSD FF AIR COMPRESSOR HP: 50 CFM: 244 MAX MAWP: 175 PSI 460 V DIMS: 52 X 34 X 68 WEIGHT: 1770 LBS EQUIPPED WITH VARIABLE SPEEDS VARIABLE CFM RANGE (27-244) INTEGRATED DRYER COSMETIC DAMAGE - LIKE NEW UNIT - 0 HOURS

2005 STAR ECAS 32T SWISS LATHE BAR CAPACITY 1.25" MAX MACHINING LENGTH 13.78" MAX DRILLING DIAMETER 0.9" MAIN SPINDLE MOTOR 10 HP MAIN SPINDLE INDEXING FULL C-AXIS MAIN SPINDLE SPEED 7,000 RPM BACK SPINDLE MOTOR 5 HP BACK SPINDLE INDEXING FULL C-AXIS BACK SPINDLE SPEED 7,000 RPM TOTAL TOOL CAPACITY (POSITIONS) 10 LIVE TOOL SPEEDS 5,700 RPM EQUIPPED WITH FIRE SUPPRESSION SYSTEM LNS EXPRESS 332 MAGAZINE BARFEED

2022 SMART SV-2 VERTICAL MACHINING CENTER RUN TIME HOURS: 878 X TRAVEL: 31.4 Y TRAVEL: 19.6 Z TRAVEL: 19.6 TABLE SIZE: 19.6 X 39.2 SPINDLE TAPER: CAT40 SPINDLE SPEED: 10,000 RPM RAPID TRAVERSE RATE: 1,890 IPM CUTTING FEEDRATE: UP TO 394 IPM AUTOMATIC TOOL CHANGER CAPACITY: 30 EQUIPPED WITH FANUC 0I-MF PLUS CNC CONTROL, COOLANT THROUGH SPINDLE PREPARATION, 4TH AXIS PREPARATION, SPINDLE OIL COOLER, LNS CHIP CONVEYOR, CHIP FLUSHING SYSTEM, RIGID TAPPING, RENISHAW PROBE-READY

2012 TRUMPF TRUPUNCH 3000-1600 PUNCHING FORCE: 20 TONS FRAME TYPE: C-FRAME PUNCHING HEAD: ELECTRIC (SERVO-DRIVEN) SHEET SIZE: 118 TO 63 INCH (3000MM X 1600MM) REPOSITIONING: YES MAX SHEET THICKNESS: 0.25 INCH MILD STEEL MAX WORKPIECE WEIGHT: 507 LBS SPEEDS: X-AXIS RAPID TRAVERSE: 90 M/MIN (3543 IPM) Y-AXIS RAPID TRAVERSE: 60 M/MIN (2362 IPM) SIMULTANEOUS X/Y: 108 M/MIN (4250 IPM) C-AXIS ROTATION: 330 RPM STROKE RATES: PUNCHING: UP TO 900-1000 STROKES/MIN MARKING/FORMING: UP TO 2500 STROKES/MIN FLOOR SPACE: 19' X 24' MACHINE WEIGHT: 15000 LBS EQUIPPED WITH TOOLING 2ND LOAD PIN HIGH SPEED MARKING WHEEL TECHNOLOGY FUNCTION BRUSH TABLES PARTS CHUTE SENSOR

2005 STAR ECAS 20 SWISS LATHE MAX. MACHINING DIAMETER 20MM (25/32IN) MAX. HEADSTOCK STANDARD 205MM (8IN) STROKE WITH GRIPPING UNIT 205MM (8IN) TOOL POST FRONT TURNING TOOL + POWER-DRIVEN TOOL REAR TURNING TOOL + END WORKING STATIONARY TOOL + POWER-DRIVEN TOOL TOOL (NUMBER OF TOOLS) FRONT 4 TOOLS REAR 2 TOOLS TOOL SHANK 12MM / 16MM : OP 4 SPINDLE SLEEVE HOLDER NUMBER OF TOOLS 4 TOOLS (REAR-END WORKING STATIONARY TOOL 2 TOOLS : OP) MAX. DRILLING CAPABILITY 10MM (25/64IN) MAX. TAPPING CAPABILITY M8 X P1.25 MAX. DIE CUTTING CAPABILITY M8 X P1.25 POWER-DRIVEN ATT. NUMBER OF TOOLS FRONT 3 TOOLS : OP REAR 3 TOOLS : OP MAX. DRILLING CAPABILITY 8MM (5/16IN) MAX. TAPPING CAPABILITY M6 X P1.0 MAX. MILLING CAPABILITY 10MM (25/64IN) MAX. SLOTTING CAPABILITY 1.5MM (W) X 4MM (D) MAIN SPINDLE MIN. INDEXING DEGREE 0.01(C-AXIS CONTROL) MAIN SPINDLE SPEED MAX. 10,000 MIN-1 MAIN SPINDLE MOTOR BUILT-IN MOTOR DRIVE 2.2KW (CONTINUOUS) / 3.7KW(30MIN) POWER-DRIVEN ATT. SPINDLE SPEED MAX. 8,000MIN-1 POWER-DRIVEN ATT. DRIVE MOTOR AC SERVO MOTOR 0.75KW COOLANT TANK CAPACITY 120L BACKWORKING SPECS MAX. CHUCKING DIAMETER 20MM (25/32IN) MAX. LENGTH FOR FRONT EJECTION 80MM (3-5/32IN) MAX. PART PROJECTION LENGTH 30MM (1-3/16IN) 4-SPINDLE ATT. (FOR BACK WORKING SIDE) NUMBER OF TOOLS 4 TOOLS MAX. DRILLING CAPABILITY STATIONARY TOOL 10MM (25/64IN) POWER-DRIVEN TOOL 8MM (5/16IN) MAX. TAPPING CAPABILITY STATIONARY TOOL M8 X P1.25 POWER-DRIVEN TOOL M6 X P1.0 SUB SPINDLE MIN. INDEXING DEGREE 0.01 (C-AXIS CONTROL) SUB-SPINDLE SPEED MAX. 10,000MIN-1 SUB-SPINDLE MOTOR (AC SPINDLE MOTOR) DIMENSIONS (W X D X H) 2,588 X 1,150 X 1,765MM EQUIPPED WITH FIRE SUPPRESSION SYSTEM LNS EXPRESS 220 MAGAZINE BARFEED, TRI MIST COLLECTOR

2017 HAIMER TOOL BALANCER BRAND NEW, STILL IN CRATE SPINDLE SPEED: 300 - 1100 U/MIN MEASURING ACCURACY: 0.5 GMM MAXIMUM TOOL LENGTH: 15.7" (400 MM) MAXIMUM TOOL DIAMETER: 15.0" (380 MM) MAXIMUM TOOL WEIGHT: 30 KG MAXIMUM TOOL LENGTH: 27.5" (700 MM) MAXIMUM TOOL DIAMETER: 16.7" (425 MM) DIMENSIONS (L X W X H): 43.3" X 32.2" X 59.0" WEIGHT: 1,000 LBS EQUIPPED WITH: HSK63 ADAPTER. COMPATIBLE WITH HSK40, HSK50, HSK63, HSK100, CAT40, CAT50, BT30, BT40, BT50, CAPTO C3, C4, C5, C6, C8, STRAIGHTSHANK / ARBOR ADAPTERS.

880 TON STRAIGHT SIDE STAMPING PRESS. CAPACITY: 880 TONS (800 TF) STROKE: 15.7 IN STROKES PER MINUTE: 1225 SPM BOLSTER AREA (L.R F.B): 141.7 39.3 IN SLIDE AREA (L.R F.B): 17.3 35.4 IN SLIDE TO BOLSTER (ADJ. UP STROKE DOWN): 35.4 IN SLIDE ADJUSTMENT: 3.1 IN MAIN MOTOR: 150 HP (110 KW) AIR CLUTCH/BRAKE PRESSURE: 57 PSI AIR LINE PRESSURE: 78 PSI FEED STROKE: 17.7 IN CLAMP STROKE: 5.9 IN MAX SPM (FEED SYSTEM): 25 SPM FINGER BAR INSIDE WIDTH AT CLAMPING: 19.6 IN HEIGHT OF FEEDING LINE: 19.6 IN EQUIPPED WITH TWO HAND CONTROL LIGHT CURTAIN SAFETY SYSTEM PHOTOELECTRIC SENSORS OVERRUN DETECTION AT 12 3 EMERGENCY STOP RESPONSE TIME 200 MS

2005 STAR SV-20 SWISS LATHE MAX. TURNING DIAMETER: 7.87 INCH HEADSTOCK STROKE: 8 INCH MAIN SPINDLE: SPINDLE SPEEDS: 10,000 RPM SPINDLE INDEXING: .01 DEG ( FULL C-AXIS) MOTOR: 7.5 HP: SPINDLE BORE DIAM.: 1 INCH SUB-SPINDLE: SPINDLE SPEEDS: 10,000 RPM MOTOR: 4.5 HP TURNING STATIONS: 5 MILLING STATIONS: 3 MILLING MOTOR: 1 HP MILLING RPM: 6,000 RPM X-AXIS TRAVELS: .787 INCH Z-AXIS TRAVELS: 8 INCH Y-AXIS TRAVELS: .787 INCH EQUIPPED WITH FIRE SUPPRESSION SYSTEM LNS EXPRESS 220 MAGAZINE BARFEED, MIST COLLECTOR

176 TON STRAIGHT SIDE STAMPING PRESS. CAPACITY 176 TONS (160 TF) BLANKING CAPACITY 141 TONS (127 TF) SLIDE STROKE 7.87 INCHES STROKES PER MINUTE (NO LOAD) 30-55 SPM DIE HEIGHT 19.68 INCHES SLIDE ADJUSTMENT 1.18 INCHES SLIDE AREA (L.XF.XB) 59.0 X 25.2 INCHES BOLSTER AREA (L.XF.XB) 80.3 X 33.0 INCHES MAIN MOTOR 20 HP REQUIRED AIR PRESSURE 71 PSI. EQUIPPED WITH WINTRISS DIPRO 1500 DIE PROTECTION SYSTEM, WINTRISS DRW-1000 DIGITAL MONITORING PANEL, LIGHT CURTAIN SAFETY SYSTEM, TWO HAND CONTROL, SLIDE ADJUST CONTROL PANEL.

2024 ATLAS COPCO GA18VSD FF AIR COMPRESSOR HP: 25 460 V CFM: 138 MAWP: 175 PSI DIMS: 47" X 28" X 59" WEIGHT: 1400 LBS EQUIPPED WITH COSMETIC DAMAGE - 0 HOURS (LIKE NEW) INTEGRATED DRYER

2014 TSUGAMI B0325-II SWISS TYPE SCREW MACHINE, 1.26 INCH MAX DIA, 12.6 INCH MAX LENGTH, 31 TOOLS, 8,000 RPM, FANUC OI-TD CNC CONTROL, WITH VIBRATORY BOWL FEED OF PARTS, ROBOT TO PICK AND PLACE PARTS IN THE MACHINE. MAX. WORKING DIAMETER: 32 MM (1.26 INCH) MAX. WORKING LENGTH: 320 MM (12.6 INCH) MAX. NUMBER OF TOOLS: 31 TOOL SIZE: .625 INCH X 3.94 INCH (SQUARE) / 25MM (ROUND) MAIN SPINDLE SPEED: 200 - 8000 RPM BACK SPINDLE SPEED: 200 - 8000 RPM RAPID TRAVERSE RATE: 32 M/MIN (105 FT/MIN) [(X1, Y1, Y2,: 24 M/MIN (78.74 FT/MIN)] CUTTING FEED RATE: 1 - 6000 MM/MIN WORKING BARSTOCK DIAMETER: 32MM (1.26 INCH) MAXIMUM MACHINING LENGTH: 320MM (12.6 INCH) - DIRECT-DRIVE GUIDE BRUSH GUIDE BRUSHLESS: 70MM (2.76 INCH) MAXIMUM MAIN SPINDLE DRILLING DIAMETER: 10MM (.39 INCH) MAXIMUM MAIN SPINDLE TAPPING DIAMETER: M10 MAXIMUM BACK SPINDLE CHUCKING DIAMETER: 32MM (1.26 INCH) MAXIMUM BACK SPINDLE DRILLING DIAMETER: 10MM (.39 INCH) MAXIMUM BACK SPINDLE TAPPING DIAMETER: M8 MAXIMUM TOOL SPINDLE DRILLING DIAMETER: 10MM (.39 INCH) MAXIMUM TOOL SPINDLE SLOTTING CUTTER DIAMETER: 45MM EQUIPPED WITH AUTOMATION INTEGRATION DONE BY IMG IN 2015, LR MATE 200ID/4S, VIBRATORY BOWL FEEDER, CHIP CONVEYOR, FANUC 0I-TD CONTROL, 85 INCH X 51 INCH X 76 INCH, 9000 LBS

2008 FANUC ROBOCUT -OID WIRE EDM TABLE SIZE 14.6" X 10.6" X 10.2" WORK TANK SIZE 30.5" X 23.6" X 9.8" X AXIS TRAVEL 14.5" Y AXIS TRAVEL 10.6" Z AXIS TRAVEL 10" MACHINE WEIGHT 4,000 LBS MAX WORK PIECE WEIGHT 1,100 LBS EQUIPPED WITH CONTROL: FANUC 310IS-WA 64 BIT AUTOMATIC WIRE FEED SYSTEM CHILLER UNIT FOR DIELECTRICAL FLUID

2014 HAAS TM-1P VERTICAL MACHINING CENTER. X-AXIS TRAVEL - 30 Y-AXIS TRAVEL - 12 Z-AXIS TRAVEL - 16 TABLE SIZE - 47.75 X 10.5 MAX TABLE LOAD - 1,000 LBS SPINDLE SPEED - 6,000 RPM SPINDLE MOTOR - 7.5 HP SPINDLE TAPER - CAT 40 ATC - 10. EQUIPPED WITH UNDER 4000 CUTTING HOURS, COOLANT TANK, HAAS CNC CONTROL.

2012 ACCUBEND 26 MULTIFORM BENDER. MATERIAL THICKNESS: .032 - .063 (STANDARD FOR CHANNEL LETTER FABRICATION). MATERIAL HEIGHT RANGE: ~1 - 6 (TYPICAL FOR MODEL 26 VARIANTS). COIL SIZE / MAX COIL WEIGHT: ~29.5 COIL DIAMETER / UP TO 300 LB CAPACITY. CONTROL SYSTEM: CNC CONTROLLER WITH LETTER BENDING SOFTWARE (STANDARD LAPTOP/PC INTERFACE). 120 V AC, 1-PHASE, 60 HZ, ~20 A SERVICE REQUIREMENT.

2001 TRUMPF TRUMABEND V130 HYDRAULIC PRESS BRAKE. CAPACITY: 144 US TONS (130 TF) BENDING LENGTH: 120.5 IN (3060 MM) DISTANCE BETWEEN HOUSINGS: 105.9 IN (2690 MM) THROAT DEPTH: 16.1 IN (410 MM) STROKE: 8.5 IN (215 MM). EQUIPPED WITH TRUMPF CNC CONTROL, CNC BACKGAUGE SYSTEM, DUAL PALMBUTTON CONTROLS, FOOT PEDAL.

2001 TRUMPF TRUMABEND V130 HYDRAULIC PRESS BRAKE. CAPACITY: 144 US TONS (130 TF) BENDING LENGTH: 120.5 IN (3060 MM) DISTANCE BETWEEN HOUSINGS: 105.9 IN (2690 MM) THROAT DEPTH: 16.1 IN (410 MM) STROKE: 8.5 IN (215 MM). EQUIPPED WITH TRUMPF CNC CONTROL, CNC BACKGAUGE SYSTEM, DUAL PALMBUTTON CONTROLS, FOOT PEDAL.

1999 TRUMPF TRUMABEND V130 PRESS BRAKE. CAPACITY: 144 US TONS (130 TF). BENDING LENGTH: 120.5 INCH (3060 MM). DISTANCE BETWEEN HOUSINGS: 105.9 INCH (2690 MM). THROAT DEPTH: 16.1 INCH (410 MM). STROKE: 8.5 INCH (215 MM). EQUIPPED WITH TRUMPF CNC CONTROL, CNC BACKGAUGE SYSTEM, DUAL PALMBUTTON CONTROLS, FOOT PEDAL, SAFETY ENCLOSURE WITH INTERLOCKED DOORS.

2007 DOOSAN LYNX 220LMA CNC LATHE CHUCK SIZE - 6.5 INCH BAR CAPACITY - 2 INCH SWING - 20 INCH TURNING DIAMETER - 9.84 INCH SPINDLE SPEED - 6,000 RPM DISTANCE BETWEEN CENTERS - 20.07 INCH TURRET - 12 STATION LIVE TOOLING - C-AXIS LIVE TOOLING CONTROL - FANUC OI-TC CHIP CONVEYOR

1984 MINSTER 75 TON OBI PRESS. TONNAGE 75, STROKE 6 INCH, RAM ADJUSTMENT 3.75 INCH, SHUT HEIGHT 12 INCH, BOLSTER 15.5 INCH, BED SIZE 24 X 36 INCH, SPEED 55 SPM, CLUTCH AIR PRESSURE 55 PSI, SINGLE GEARED. EQUIPPED WITH AIR CLUTCH, DUAL PALM BUTTONS FOR OPERATION, BOLSTER PLATE, ELECTRIC CONTROLS.

1987 AIDA NC2-200 200 TON TWO POINT MECHANICAL GAP FRAME STAMPING PRESS. PRESSING CAPACITY: 220 TONS (200 TF). STROKE LENGTH: 9.84 IN (250 MM). NO-LOAD CONTINUOUS STROKE COUNT: 2545 SPM. DIE HEIGHT: 19.69 IN (500 MM). SLIDE ADJUSTMENT RANGE: 4.33 IN (110 MM). MAIN MOTOR POWER: 29.5 HP (22 KW). SUPPLY AIR PRESSURE: 71.4 PSI (5 KGF/CM2). EQUIPPED WITH TWO HAND CONTROL, LIGHT CURTAIN SAFETY SYSTEM, PHOTOELECTRIC SENSORS, OVERRUN DETECTION AT 12 3, EMERGENCY STOP RESPONSE TIME 200 MS.

2000 MITSUBISHI M-H4B/16 HORIZONTAL MACHINING CENTER PALLET SIZE (CAP.) 15.75 X 15.75 / (880 LBS.) PALLET INDEXING (B-AXIS) 0.001 SPINDLE NOSE TO TABLE CENTER 5.9 - 31.5 SPINDLE CENTER TO TABLETOP 2 - 24 X-AXIS TRAVEL 25.6 Y-AXIS TRAVEL 25.6 Z-AXIS TRAVEL 25.6 SPINDLE TAPER CT 40 SPINDLE SPEED 12,000 RPM SPINDLE MOTOR 30 HP. TOOL CHANGER CAPACITY: 60 STATIONS RAPID TRAVERSE RATES 1,575 IPM TOOL CHANGE TIME (T-T / C-C) 1.3 / 3.8 SECS. MAXIMUM TOOL DIAMETER / WEIGHT / LENGTH 5.9 / 11.8 / 18 LBS. ELECTRICAL REQUIREMENTS 230V/3PH/60HZ MACHINE DIMENSIONS 17L X 11W X 10H MACHINE WEIGHT 23,150 LBS. EQUIPPED WITH CHIP CONVEYOR, FANUC 18I-M CONTROL, PROBING, COOLANT THRU SPINDLE

2020 ROGERS KRV-100-125 AIR COMPRESSOR MOTOR POWER: 100 HP MAXIMUM PRESSURE: 135 PSIG MAXIMUM AIR FLOW RATE: 445 ACFM MINIMUM AIR FLOW RATE: 109 ACFM EQUIPPED WITH ASME-CODED AIR RECEIVER TANK VARIABLE FREQUENCY DRIVE (VFD)

1970 BERTSCH 11-B 3 ROLL PLATE ROLL. CAPACITY 96" X 3/4". TOP ROLL DIAMETER 13". LOWER ROLL DIAMETER 13.5". REAR ROLL MOTOR 10HP. MAIN MOTOR 20HP. EQUIPPED WITH MOTORIZED REAR AND BOTTOM ROLL ADJUSTMENT.

1999 AIDA LFM500R9S SERVO FEEDER & 9ROLL STRAIGHTENER. COIL WIDTH CAPACITY: 2.8" TO 19.6" (70 TO 500 MM). COIL THICKNESS CAPACITY: 0.02" TO 0.09" (0.5 TO 2.3 MM). FEED LENGTH: 0.4-50". STRAIGHTENING ROLLS: 9 ROLLS (R9 CONFIGURATION). ELECTRICAL REQUIREMENTS: 208V/60HZ. EQUIPPED WITH CONTROLLER: AIDA DIGITAL KEYPAD CONTROLLER. PINCH ROLLS: UPPER AND LOWER POWERED. FEED TYPE: SERVO DRIVEN ROLL FEED.

1998 FANUC T14-A ROBODRILL X TRAVEL 19 INCH Y TRAVEL 14 INCH Z TRAVEL 11 INCH RPM 8,000 RPM # ATC 14 TAPER 30 TABLE-W 14 INCH TABLE-L 19 INCH # AXIS 3

2023 WILLIS 1440 ENGINE LATHE SWING OVER BED: 14.25 INCH (360 MM) SWING OVER CROSS SLIDE: 8.625 INCH (215 MM) SWING IN GAP: 22 INCH (560 MM) CENTER HEIGHT: 7 INCH (178 MM) DISTANCE BETWEEN CENTERS: 40 INCH (1000 MM) GAP WIDTH IN FRONT OF FACEPLATE: 6 INCH (150 MM) SPINDLE NOSE: D15 SPINDLE BORE: 1.625 INCH (42 MM) SPINDLE SPEEDS: 8 STEPS, 70-2000 RPM OPTIONAL SPINDLE SPEEDS: 16 STEPS, 35-2000 RPM VARISPEED RANGE (OPTIONAL): 35-2500 RPM (2 RANGE) SPINDLE TAPER (NOSE BUSH): MT#5 SPINDLE CENTER: MT#3 CROSS SLIDE TRAVEL: 7.6 INCH (195 MM) TOP SLIDE TRAVEL: 4 INCH (100 MM) WIDTH OF BED: 10 INCH (250 MM) LENGTH OF BED: 71.5 INCH (1820 MM) TAILSTOCK SPINDLE TRAVEL: 4.75 INCH (120 MM) TAILSTOCK BARREL DIAMETER: 2 INCH (50 MM) TAILSTOCK CENTER: MT#3 POWER REQUIREMENTS: 230V, 3 PHASE, 60HZ, 13 AMPS EQUIPPED WITH 5 HP MAIN MOTOR D15 CAMLOCK SPINDLE NOSE HARDENED AND GROUND BED WAYS HARDENED AND GROUND HEADSTOCK GEARS & SHAFTS UNIVERSAL INCH/METRIC GEARBOX FEED ROD OVERLOAD CLUTCH 110V CONTROLS WITH NOVOLT RELEASE & ESTOP INCH/METRIC DUAL DIALS FOOT BRAKE FLOOD COOLANT SYSTEM FULL LENGTH SPLASHGUARD PULLOUT CHIP TRAY 4 WAY TOOL POST D15 BACK PLATE

1995 WYSONG H-2512 MECHANICAL SHEAR CAPACITY - 1/4 INCH MAS SHEARING LENGTH - 12 FT CONTROL - PC100 MOTOR - 15HP APPROXIMATE WEIGHT: 20,500 LBS APPROXIMATE DIMENSIONS: 161 L X 76 W X 73 H

1999 MIGHTY VIPER VMC 500 P VERTICAL MACHINING CENTER. X-AXIS: ~20 INCH (510 MM) Y-AXIS: ~16 INCH (406 MM) Z-AXIS: ~16 INCH (406 MM) TABLE SIZE: ~24 INCH X 14 INCH MAX TABLE LOAD: ~800 1,200 LBS SPINDLE TAPER: CAT 40 SPINDLE SPEED: 6,000 8,000 RPM (BELT OR GEARED) SPINDLE MOTOR: ~7.5 10 HP ATC CAPACITY: 16 RAPID TRAVERSE (X/Y/Z): ~400 600 IPM CUTTING FEED: ~200 300 IPM EQUIPPED WITH 16 ATC

2003 OKUMA MA-40HA HORIZONTAL MACHINING CENTER X AXIS TRAVEL: 22.05 INCH Y AXIS TRAVEL: 24.01 INCH Z AXIS TRAVEL: 24.61 INCH RAPID RATE X AXIS: 1,574 IPM RAPID RATE Y AXIS: 1,574 IPM RAPID RATE Z AXIS: 1,574 IPM PALLET SIZE: 15.75 INCH X 15.75 INCH MAX PALLET LOAD: 880 LBS SPINDLE SPEED: 15,000 RPM SPINDLE MOTOR: 35 HP SPINDLE TAPER: 40 CT TOOL CHANGER: 30 ATC DIMENSIONS: 170 INCH X 105 INCH X 120 INCH WEIGHT: 25,000 LBS EQUIPPED WITH CHIP CONVEYOR, COOLANT THRU SPINDLE, PROBING, OSP-E100M CONTROL

2009 AMADA/VIRTEK FABRIVISION LPS-1DS LASER SCANNER. SCANNING ZONE / WORK AREA: ~48 X 48. HEIGHT MEASUREMENT (OPTIONAL/DIFFERENT AXIS): 0.010. MAXIMUM PART THICKNESS: ~8.0. MAXIMUM PART WEIGHT: ~200 LBS. SOFTWARE: FABRIVISION LASER/INSPECTION SOFTWARE. LASER TYPE: LASER DIODE DEVICE WITH LOW-POWER OUTPUT. OVERALL DIMENSIONS: ~79 X 65 X 96.

SOUTH BEND TURNADO ENGINE LATHE. CAPACITY: SWING OVER BED AND SADDLE WINGS: 20 INCH SWING OVER CROSS SLIDE: 13 INCH SWING OVER CROSS SLIDE WITHOUT CHIP GUARD: 14 INCH SWING OVER COMPOUND REST: 4 INCH. HEADSTOCK: SPINDLE NOSE: 8 INCH D-1 CAM-LOCK. SIZE OF CENTER (MORSE TAPER): NO.5. DISTANCE FROM SPINDLE CENTER TO FLOOR: 45-1/2 INCH. HOLE THROUGH SPINDLE: 3-5/32 INCH. SPINDLE SPEEDS: 1800-900 RPM MOTOR (TWO SPEEDS): (18) 30-1580 RPM. TWO-SPEED MOTOR: 10-5 HP. BED: WIDTH: 13 INCH. LENGTH: 150 INCH. DISTANCE BETWEEN CENTERS: 132 INCH. GEARBOX-THREADS & FEEDS: NUMBER OF THREAD SELECTIONS: 60. RANGE OF THREADS (20T STUD GEAR) 60 SELECTIONS: 2-3/4 INCH-160 INCH T.P.I. RANGE OF THREADS (40T STUD GEAR). RANGE OF LONGITUDINAL FEEDS (60): 0.0021 INCH-0.1242 INCH. RANGE OF CROSS-FEEDS (60): 0.0011 INCH-0.0678 INCH. LEAD SCREW: 1-3/8 INCH- 4 INCH. SADDLE: CROSS-FEED TRAVEL (WITHOUT TAPER ATTACHMENT): 12-1/4 INCH. CROSS-FEED TRAVEL (WITH TAPER ATTACHMENTS): 14 INCH. COMPOUND REST TRAVEL: 3-1/2 INCH. SQUARE TOOL POST OPENING: 1 INCH X 1-7/64 INCH. TAILSTOCK: SPINDLE DIAMETER: 2-1/2 INCH. SPINDLE TRAVEL: 6 INCH. SIZE OF CENTERS (MORSE TAPER): NO.4. SET OVER IN EITHER DIRECTION FROM CENTER: 1/2 INCH. APPROX MACHINE DIMS-162 INCH OVERALL LENGTH X 65 INCH W X 76 INCH H. WEIGHT- APPROX -12,000 LBS. EQUIPPED WITH SONY 2-AXIS DROS, TAILSTOCK, THREADING IN/MM, (2) STEADY REST.

SHANGHAI QIPANG INDUSTRIAL CO, INDUSTIRAL WIRE STRAIGHTNER WIRE DIAMETER: .0007"-.472" CUTTING RANGE:. 3937"-3,936" MAX CUTTING SPEED: 200/400 PIECES PER MINUTE WIRE MATERIAL: CARBON & STAINESS STEEL FEEDING MOTOR: 2.0KW SERVO MOTOR STRAIGHTENING MOTOR:CUSTOM ADJUSTABLE SPEED MOTOR 3KW/2880R CUTTING SHEAR MOTOR:2.8KW SERVO MOTOR

2012 EMMEGI SATELLITE 10350 5 AXIS MACHINING CENTER XAXIS TRAVEL: 407 INCH (10,350 MM) YAXIS TRAVEL: 31.5 INCH (800 MM) ZAXIS TRAVEL : 19.7 INCH (500 MM) BAXIS ROTATION: 0 TO 90 CAXIS ROTATION: 0 TO 360 MAX PROFILE HEIGHT: 15.0 INCH (380 MM) MAX PROFILE WIDTH: 15.7 INCH (400 MM) SPINDLE POWER: 33.5 HP (25 KW) SPINDLE TAPER: HSK40E SAW BLADE DIAMETER: 11.8 INCH (300 MM) NUMBER OF AUTOMATIC INDEPENDENT CLAMPS: 10 ELECTRICAL REQUIREMENTS: 400 V (3PHASE) EQUIPPED WITH 25 KW HIGHPOWER SPINDLE LINEAR AUTOMATIC TOOL CHANGER (8POSITION) FULL SAFETY ENCLOSURE WITH INTERLOCKED GUARDS AUTOMATIC CLAMP POSITIONING SYSTEM BRUSHLESS SERVO MOTORS ON ALL AXES LIGHTCURTAIN SAFETY BARRIERS EMERGENCY STOP AND LOCKOUT SYSTEM THIS MACHINE IS CURRENTLY NON-OPERATIONAL DUE TO AN OPERATING SYSTEM ISSUE. IT CAN BE FIXED WITH REPLACEMENT OF SOFTWARE, EMMEGI TECHNICIAN VERIFIED THIS

BLACKSTONE-NEY MODEL A0II-2-1824-TR ULTRASONIC CLEANING SYSTEM. CAPACITY: 2 STATIONS - (1) CLEANING / (1) RINSING - 10.6 GALLONS (19.8 LITERS). TANK SIZE: 2 STATIONS - 18" X 24" EACH TANK. FREQUENCY: 40 KHZ. HEATING: 2000W. EQUIPPED WITH: (2) 304 STAINLESS STEEL PARTS BASKETS, ADJUSTABLE TEMPERATURE CONTROL FOR EACH STATION.

2014 TAKISAWA TT-2100G TWIN SPINDLE TWIN TURRET CNC LATHE. MAX TURNING DIAMETER: 8.27 INCH (210 MM) MAX TURNING LENGTH: 11.8 INCH (300 MM) BAR CAPACITY: 2.00 INCH (51 MM) XAXIS TRAVEL (UPPER/LOWER): 6.50 INCH (165 MM) ZAXIS TRAVEL (UPPER/LOWER): 13.78 INCH (350 MM) RAPID TRAVERSE (X/Z): 787 / 945 IPM (20 / 24 M/MIN) SPINDLE NOSE: A26 SPINDLE SPEED: 4,500 RPM SPINDLE MOTOR: 20/15 HP (15/11 KW) SPINDLE BORE: 2.44 INCH (62 MM) CHUCK SIZE: 8 INCH NUMBER OF TURRETS: 2 STATIONS PER TURRET: 12 TOOL SHANK SIZE: 0.75 INCH (20 MM) BORING BAR SIZE: 1.00 INCH (25 MM) INDEX TIME: ~0.2 SEC/STATION COOLANT CAPACITY: 52.8 GAL (200 L) COOLANT PUMP: 1 HP (0.75 KW) EQUIPPED WITH TWIN SPINDLES (LEFT & RIGHT) TWIN 12STATION TURRETS FANUC CNC CONTROL TAKISAWA AUXILIARY TOUCHSCREEN PANEL FULL CHIP CONVEYOR PARTS DISCHARGE / PARTS CHUTE BAR SUPPORT RACK CAXIS ON BOTH SPINDLES

2018 ERIEZ HP20 FLUID RECYCLING CENTRIFUGE SYSTEM. FLOW RATE: 20 GPM. SEPARATION METHOD: MULTISTAGE CENTRIFUGAL SEPARATION. CONTAMINANT REMOVAL: TRAMP OIL + FINE PARTICULATE. COOLANT COMPATIBILITY: WATERSOLUBLE, SYNTHETIC, AND SEMISYNTHETIC COOLANTS. DUTY CYCLE: CONTINUOUS SHOPFLOOR COOLANT RECYCLING. APPLICATIONS: CNC MACHINE COOLANT RECYCLING, TRAMP OIL REMOVAL, FINE PARTICULATE SEPARATION, EXTENDING COOLANT LIFE, REDUCING COOLANT DISPOSAL COSTS, IMPROVING TOOL LIFE AND SURFACE FINISH.

2007 MESSER TITAN PLASMA CUTTING SYSTEM 10X30' TABLE SIZE: 10' X 30' AMPS: 260 DRY TABLE EQUIPPED WITH SINGLE PLASMA HEAD, HYPERTHERM 260 POWER SUPPLY

2016 NORTHERN VISION NVHD 6X30 PLASMA CUTTING AREA 6 X 30' ALL STEEL FRAME 10GA SIDES & BOTTOM DUAL RACK & PINION DRIVEN TABLE DUAL HARDENED & GROUND LINEAR GUIDE WAYS 1000+ IPM MOVEMENT EQUIPPED WITH SDS PLATE BUILDER FABRICATION SOFTWARE, HYPERTHERM POWERMAX 125 (SPARE TORCH INCLUDED), 6000 CFM EXHAUST UNIT, NEMA 34 MOTORS, DUAL DRIVES, DUAL X AXIS DRIVES, PIERCE & TORCH HEIGHT CONTROL, JOGGING CONTROLS, IMPORTS DXF & G-CODE FILES, CUSTOM M CODES, SHAPE WIZARD & CAD PROGRAM INCLUDED

40 HORSEPOWER 125 PSI 460 VOLT 60 HZ AIR COMPRESSOR

REDIN NO. 18 GEAR DEBURRING / CHAMFERING MACHINE MAXIMUM O.D.: 18 INCH (457.2 MM) MINIMUM O.D.: 0 INCH (0 MM) MAXIMUM I.D.: 16 INCH (406.4 MM) MINIMUM I.D.: 0.75 INCH (19.05 MM) MAXIMUM FACE WIDTH: 12 INCH (304.8 MM) MINIMUM D.P.: 20 DP (1.27 MOD) MAXIMUM WORKPIECE WEIGHT: 800 LBS (360 KG) GRINDING WHEEL SPEED: 13,500 RPM GRINDING WHEEL SPEED (FULL LOAD): 7,000 RPM WORK SPINDLE SPEED: 0.23 TO 9.4 RPM

1997 OKUMA LFS10-2SP MULTI SPINDLE CNC LATHE MAX TURNING DIAMETER: 7.87 INCH (200 MM) MAX TURNING LENGTH: 5.90 INCH (150 MM) BAR CAPACITY: 1.65 INCH (42 MM) CHUCK SIZE (L & R): 6 INCH (152 MM) HYDRAULIC CHUCKS XAXIS TRAVEL: 5.51 INCH (140 MM) ZAXIS TRAVEL: 11.81 INCH (300 MM) SPINDLE NOSE: A25 SPINDLE BORE: 1.89 INCH (48 MM) MAX SPINDLE SPEED: 6,000 RPM SPINDLE MOTOR: 10 HP (7.5 KW) STATIONS: 8STATION TURRET TOOL SHANK SIZE: 0.787 INCH (20 MM) BORING BAR SIZE: 0.984 INCH (25 MM) XAXIS: 787 INCH/MIN (20 M/MIN) ZAXIS: 945 INCH/MIN (24 M/MIN) EQUIPPED WITH OKUMA OSP7000L CNC CONTROL TWIN SPINDLES (LEFT & RIGHT) 8 STATION TURRET INTEGRATED OKUMA GANTRY LOADER SYSTEM DUALSIDE OPERATOR PANELS (LSIDE / RSIDE) 6 INCH HYDRAULIC CHUCKS (BOTH SIDES)

MICRO*CLEAN MODEL 48A-01CL0RFM

2018 LNS SUPER HYDROBAR HS647-6.68 BAR FEEDER TYPE: MANUAL LOAD, HYDRAULIC BAR DIAMETER: APPROX. 1/16" TO 2-5/8" (1.5 MM - 68 MM) BAR LENGTH: UP TO 12 FEET (3.7M) GUIDANCE: HYDRODYNAMIC SYSTEM WITHIN ENCLOSED TUBES DRIVE: HYDRAULIC PRESSURE LOADING: TUBE SWING-OUT SYSTEM, RIGHT OR LEFT LOADING MAGAZINE: 6-7 TUBES BASED ON BAR DIAMETER LOADED