50 SUPER HIGH END CNC MACHINE TOOLS AT ONLINE AUCTION

2018 HWACHEON VESTA 1000+ CNC 3-AXIS VERTICAL MACHINING CENTER S/N M299366J5NB, SPINDLE SPEED: 12,000 RPM, TABLE / PALLET SIZE: 43.31" X 19.69", SPINDLE MOTOR: 25 HP, X-TRAVEL: 39.37 INCHES, TOOL MAGAZINE CAPACITY: 30, Y-TRAVEL: 21.65 INCHES, MAX TOOL DIAMETER: 5.91 INCHES, Z-TRAVEL: 19.69 INCHES, MAX TOOL LENGTH: 11.81 INCHES, CUTTING FEED RATE: 945 IPM, MAX TOOL WEIGHT: 17.64 INCHES, SPINDLE TAPER TYPE: BT#40, MAX TABLE/PALLET LOAD: 1,543 LBS., CONTROL MAKE/MODEL: FANUC OI-MF, RENISHAW PROBE SYSTEM (MISSING PROBE), 12,000 RPM SPINDLE, 30 POSITION TOOL CHANGER, COOLANT SYSTEM, 4TH AXIS READY, COOLANT THRU SPINDLE, HIGH PRESSURE COOLANT, AIR DRYER

2018 SMEC MCV-4300 3-AXIS CNC VERTICAL MACHINING CENTER DISTA TRAVEL X/Y/Z 30.31 X 16.92 X 20.08 RAPID TRAVERSE(X/Z) 1,417/1,417/1,181 DISTANCE FROM TABLE TOP TO SPINDLE SPINDLE NOSE 5.91 - 25.98 TOOL SHANK CAT40 WORKING SURFACE - TABLE SIZE 18.11 X 36.22 TOOL CHANGING TIME(T-T) 1.3 LOADING CAPACITY 1102 MAGAZINE CAPACITY 30 DISTANCE FROM COLUMN TO SPINDLE CENTER 22.83 REQUIRED FLOOR SPACE 118.1 X 93.3 X 104.1 SPINDLE SPEED 12000 MACHINE WEIGHT 12125 SPINDLE MOTOR(30MIN/CONT.) 25/15 CONTROLLER FANUC FNAUC 0I-MF+ MAX SPINDLE TORQUE 87 FANUC OI-MF+ CONTROL 12,000 RPM SPINDLE 30 POSITION AUTOMATIC TOOL CHANGER RENISHAW PROBE COOLANT THRU SPINDLE CHIP CONVEYOR TOOLING AND TOOL CART

2013 DMC MODEL DT 40I CNC 4-AXIS DRILL TAP CENTER, S/N T4010044, TABLE SIZE 27.6" X 15.7", TRAVELS X,Y,Z 23.6" X 15.7" X 13.8", 4TH AXIS FACEPLATE 7.9", SPINDLE RPM 12,000 RPM, TABLE CAPACITY 551 LBS., SPINDLE HP 7.4/5.0 HP, FEED RATE 394 IPM, TOOL CHANGE TIME (TOOL TO TOOL) 1.3 SECONDS, TOOL CHANGE TIME (CHIP TO CHIP) 2.0 SECONDS, RAPID TRAVERSE RATE (X&Y/Z) 1,890/1,417 IPM, PULL STUD TYPE P30T-1, MACHINE DIMENSIONS 67" X 101" X 103"H, MACHINE WEIGHT 5,776 LBS., DMC DT40I CNC TAPPING CENTER, S/N T40I0044, 2013, WITH 27.5" X 16" TABLE, 10,000-RPM, BT 30, 600 MM X-AXIS TRAVEL, 400 MM Y-AXIS TRAVEL, 350 MM Z-AXIS TRAVEL, 5.5-KW, 21-POSITION AUTOMATIC TOOL CHANGER, FANUC OI-MD CONTROL, SAMCHULLY S-200F4 NC ROTARY, 8" FACEPLATE, CHIP CONVEYOR, COOLANT PUMP & TANK, EQUIPPED WITH, FANUC OI-MD CNC CONTROL, 12,000 RPM BT-30 SPINDLE, 21 POSITION ATC, SAMCHULLY S-200F4 NC 4TH AXIS ROTARY TABLE, HIGH PRESSURE COOLANT THRU SPINDLE, COOLANT SYSTEM

1987 OKAMOTO PSG-305 HYDRAULIC RECIPROCATING SURFACE GRINDER S/N: 1829. SPECIFICATIONS: OKAMOTO PSG-305 20" X 120" 3-AXIS AUTOMATIC SURFACE GRINDER WITH INCREMENTAL DOWN FEED AND ELECTROMAGNETIC CHUCK. EQUIPPED WITH: INCREMENTAL DOWN FEED, 19-3/4" X 118" ELECTROMAGNETIC CHUCK WITH NEUTROFIER CONTROL, HYDRAULIC WHEEL DRESSER, COOLANT SYSTEM WITH PAPER FILTRATION AND MAGNETIC SEPARATOR, HYDRAULIC SYSTEM HEAT EXCHANGER, WHEEL HUB & NUT. ELECTRICS: 230/460 VOLT, 3-PHASE. MAIN UNIT APPROX WEIGHT: 28600.00 LBS. MAIN UNIT DIMENSIONS (IN INCHES): LENGTH: 357.00" WIDTH: 109.00" HEIGHT: 93.00". COMPONENTS: COOLANT SYSTEM: LENGTH: 64.00" WIDTH: 50.00" HEIGHT: 48.00". HYDRAULIC SYSTEM: LENGTH: 30.00" WIDTH: 46.00" HEIGHT: 38.00". OIL COOLER: LENGTH: 26.00" WIDTH: 21.00" HEIGHT: 50.00". SPECS: TABLE WORKING SURFACE: 120.08" X 19.7". MAX LONGITUDINAL TABLE TRAVEL: 124.02". AUTO LONGITUDINAL FEED RATE: 1 TO 100 FPM. MAX DISTANCE SPINDLE / WHEEL TO TABLE: 23.4" (UNDER 20" WHEEL). MAX WHEEL SIZE : 20" X 2" X 5". WHEEL SPEED: 1100 RPM. CROSSFEED TRAVEL AUTO / MANUAL: 20.86". MAX GRINDING LENGTH X WIDTH: 120.08" X 20". CROSS FEED AUTOMATIC INCREMENTS: .20" TO 1.37". RAPID WHEELHEAD FEED RATE: 12" / MIN. AUTO WHEELHEAD DOWNFEED INCREMENTS: 0.0002" TO 0.002" PER COLUMN REVERSAL. HAND WHEELHEAD DOWNFEED INCREMENTS: 0.0002" GRADUATIONS. WHEELHEAD ELEVATION MOTOR: 1/2HP. HYDRAULIC MOTOR: 7-1/3HP. SPINDLE DRIVE: 10HP. EQUIPPED WITH: OKAMOTO PSG-305 20" X 120" 3-AXIS AUTOMATIC SURFACE GRINDER WITH INCREMENTAL DOWN FEED AND ELECTROMAGNETIC CHUCK. EQUIPPED WITH: INCREMENTAL DOWN FEED, 19-3/4" X 118" ELECTROMAGNETIC CHUCK WITH NEUTROFIER CONTROL, HYDRAULIC WHEEL DRESSER, COOLANT SYSTEM WITH PAPER FILTRATION AND MAGNETIC SEPARATOR, HYDRAULIC SYSTEM HEAT EXCHANGER, WHEEL HUB & NUT. ELECTRICS: 230/460 VOLT, 3-PHASE. NOTE: JUST RELEASED FROM OEM MANUFACTURER DAILY USE VERY GOOD CONDITION.

HURCO AUTOBEND 5 DIGITAL BACK GAUGE FOR PRESS BRAKE, S/N AA8001023

2012 OKUMA V40R CNC 3-AXIS VERTICAL LATHE MAX SWING DIAMETER: 19.69", MAX TURNING LENGTH:17.72", MAX CHUCK SIZE: 17.72", MAX TURNING DIAMETER: 15.75", MAX WORKPIECE WEIGHT: 660 LBS., X AXIS TRAVEL: 10.43", Z AXIS TRAVEL: 17.72", SPINDLE SPEED: 25 - 2,500 RPM, TURRET TYPE: V12, TYPE OF NOSE: A2-8, 12 POSITION TURRET WITH 6 LIVE TOOLING STATIONS, 5HP 2000RPM SPINDLE, EQUIPPED WITH, FANUC 31I-A CONTROL, LIVE TOOLING STATIONS 6, C-AXIS, 12" 3-JAW CHUCK, COOLANT SYSTEM, CHIP CONVEYOR, 1 RADIAL LIVE TOOL AND 1 AXIAL LIVE TOOL, S/N: 164028

2016 MAZAK HCN NEXUS 4000-III 4-AXIS PRECISION HORIZONTAL MACHINING CENTER, S/N 272397, SPECIFICATIONS, STROKE:, X AXIS STROKE (COLUMN TRAVEL RIGHT/LEFT) 22.0", Y AXIS STROKE SPINDLE HEAD TRAVEL UP/DOWN 25.2", Z AXIS STROKE (PALLET FORWARD/BACKWARD) 25.2", DISTANCE FROM PALLET CENTER TO SPINDLE NOSE 2.8"-28.0", TABLE INDEXING TIME 1.3 SEC EACH 90 DEG, SPINDLE:, MAX. SPINDLE SPEED 18,000 RPM, SPINDLE BEARING SIZE 70MM, FEEDRATE:, RAPID TRAVERSE RATE (X,Y,Z AXES) LIMITED W/CONT. AXIS MOV. 2,362 IPM, AXIS ACCELERATION/DECELERATION 1G, AUTOMATIC TOOL CHANGER:, TOOL STORAGE CAPACITY 60 TOOLS - 40 TAPER, MAX. TOOL DIAMETER/LENGTH (FROM GAUGE LINE)/WEIGHT 6.7", TOOL SELECTION METHOD (RANDOM SELECTION @) SHORTEST PATH, TOOL CHANGE TIME (CHIP TO CHIP) 2.4 SEC., MOTORS:, SPINDLE MOTOR 25/23 HP, FLOOD COOLANT PUMP MOTOR 50/60 HZ, MACHINE SIZE 87"X207"X106.8"H, MACHINE WEIGHT 23,584 LBS., MOTOR SPECIFIFCATIONS:, 25 HP MAIN SPINDLE DRIVE MOTOR, EQUIPPED WITH, MAZATROL MATRIX NEXUS 2 CNC CONTROL, FLOOD COOLANT SYSTEM, WORK LIGHT, ONE SET OF ADJUSTING TOOLS, FOUNDATION KIT (BLOCK, FIXTURE), MAZAK STANDARD COLOR (F WHITES/S BLACK), THE SAFETY MEASURES ON WORLDWIDE LEVEL, Y AXIS TRAVEL 25.20" & 2 PALLET CHANGER, 19" COLOR LCD (TOUCH SCREEN), POWER TRANSFORMER FOR OTHER MARKETS, MAIN SPINDLE MOTOR AC 18.5 KW (25 HP), SPINDLE CHILLER UNIT, ABSOLUTE POSITIONING SYSTEM, STANDARD TAP PALLET (W/O EDGE LOCATORS), SAFETY COVER FOR 2 PALLET CHANGER, COOLERS FOR BALL SCREW (X,Y,Z-AXIS), ROLLER GUIDES, AIR THROUGH SPINDLE SYSTEMS (SPINDLE STOP), NIAGARA COOLANT (RECOMMENDED EQUIPMENT), OPERATOR DOOR INTERLOCK WITH LOCK-SWITCH, AUTO POWER ON/OFF + WARM-UP, ATC & APC AUTO RECOVERY, TOOL ID MAGAZINE PANEL (TOUCH PANEL), ENCLOSED COOLANT & SPLASH COVER, PREP. FOR CHIP CONVEYOR REAR (CONSEP-1), SMOOTH STANDARD SOFTWARE, USER MACRO (COMMON VARIABLES; 600 PAIRS), MAZAK TAPPING/BORING TORNADO (MAZATROL & EIA/ISO), EIA/ISO CODE INPUT FUNCTION (STANDARD), ADD. EIA/ISO FUNCTIONS (RE.IEA/ISO), INVERSE TIME FEED, G37.AUTOMATIC TOOL-LENGTH MEASUREMENT, SEQUENCE NUMBER COMPARISON STOP FUNCTION, BACKGROUND TOOL PATH CHECK, ADD. WORKPIECE COORDINATE SYS. 300-PAIRS, THREAD CUTTING FUNCTION, EIA PATTERN CYCLE (GRID, ARC), USB I/F (1-PORT), LAN PORT, ACCURACY INSPECTION, RELOCATION DETECTOR & ADDITIONAL REINFORCEMENT FOR TRANSPORT, OPTIONAL EQUIPMENT:, AUTO TOOL LENGTH MEASURE. & BREAK DETECTOR, MANUAL PULSE GENERATOR (WIRED/DETACHABLE), HI-PRESS COOLANT THRU SYS (15KG (213 PSI)), CHIP CONVEYOR , (CONSEP-1) N/A6PC, B)SYNCHRONIZED TAPPING & B) CYLINDRICAL INTERPOLATION (RQR.NCRT), SIGNAL TOWER (3 COLORS LIGHTS, SQUARE), 60 TOOL DRUM MAGAZINE (RANDOM MEMORY), SPINDLE SPEED 18,000 RPM (RANDOM MEMORY) & NC ROTARY TABLE (360,000 POSITIONS), *ONLY CUT ALUMINUM

2014 OKUMA MB-5000H CNC 5-AXIS HORIZONTAL MACHINING CENTER, S/N 175159, SPECIFICATIONS, OKUMA MB-5000H, NEW - 2014, OKUMA SPACE CENTER MB-5000H SPECIFICATIONS:, X-AXIS (COLUMN RIGHT/LEFT)............29.92", Y-AXIS (SPINDEL UP/DOWN)............29.92", Z-AXIS (TABLE FRONT/BACK)............29.92", SPINDLE CENTER TO TABLE SURFACE............1.97" TO 31.89", SPINDLE END TO TABLE CENTER............5.31" TO 35.24", TABLE (PALLET) SIZE............19.69" X 19.69, LOAD CAPACITY - MAXIMUM............1,000 LBS., OPTIONAL INDEX POSITIONS............360,000, SPINDLE SPEED - MAXIMUM............15,000 RPM, RAPID FEEDRATE(X-/Y-/Z-XIS)............2,362.20 IPM, JOG FEEDRATES (X-/Y-/Z-AXIS)............0.04 TO 2,362.20 IPM, TOOL MAGAZINE CAPACITY............64, TAPER............CAT 40, TOOL DIAMETER - MAXIMUM............2.76", WITHOUT ADJACENT TOOLS............5.91", TOOL LENGTH - MAXIMUM............11.81", TOOL WEIGHT - MAXIMUM............22 LBS., NO. OF PALLETS............2, SPINDLE DRIVE [STANDARD (WIDE RANGE)]............40 HP, X-AXIS FEED............6.13 HP, Y-AXIS FEED............6.13 HP, Z-AXIS FEED............6.13 HP, HYDRAULIC POWER UNIT............3 HP, TABLE INDEXING............4.00 HP, POWER REQUIREMENTS............KVA 45 (15,000), VOLTAGE............200V VAC +/- 10%, FREQUENCY............50/60 HZ, MACHINE HEIGHT............113.35", FLOOR SPACE............102.56" X 181.50", MACHINE WEIGHT............27,500 LBS., EQUIPPED WITH, OKUMA OSP P300M CNC CONTROL, 20" X 20" PALLETS, FULL 5TH AXIS TABLE ON TABLE, 15,000 RPM SPINDLE, 40 TAPER, 64 POSITION TOOL CHANGER, MP HIGH PRESSURE COOLANT PUMP, THRU SPINDLE COOLANT, CHIP CONVERYOR, (2) TSUDAKOMA RBA-320K CNC ROTARY TABLE W/ 12.5" DIAMETER 5TH AXIS TABLE., MIST COLLECTOR, DATA CARD 3/2015 OPTIONS:, COLOR-DISPLAY, TOOL BREAKAGE, MACHINE MANAGEMENT, CUSTOM API, B-AXIS LIMIT, FEED BACKLASH FUNCTION, GRAPHIC, INDUCTOSYN B, ANIMATION, TOOL LIFE MANAGEMENT, SPARE T1.CHANGE, VERT. BACKLASH, ADD AXIS A, B, C, DNC-T1, COMP VARIABLES 200 SETS, HELICAL CUTTING, ONE-DIRECT POSITION, SAFTY LOGIC SP., SKIP FUNCTION, CHANGE WORK COORDINATES, ANGLE CHAMFER, 6-AXIS CONTROL, POINT CALC, ADD PATTERN CYCLE, EXACT STOP, MIRROR IMAGE, WORK COORDINATES 100, SIMPLE LOAD MONITOR, 3D SIMULATION, SYNCHRONIZED TAPING, SUPER-HI-NC-RT, IN/OUT VARIABLE, CANCEL AXIS, SEQUENCE STOP, GRAPHIC IMAP, TAPE STORAGE 320M,

2010 AGIE CHARMILLES CUT 20P CNC WIRE CUT EDM MACHINE SN 057-008 - SPECIFICATIONS: TANK SIZE 41" X 30" X 22" TANK CAPACITY 52 GAL CLEAN/158 GAL DIRTY TABLE DIMENSIONS 27 " X 18" MAX PART SIZE 35" X 26" X 9" MAX PART WEIGHT 882 LB X-AXIS TRAVEL 13.78" Y-AXIS TRAVEL 9.84" Z-AXIS TRAVEL 9.84" U & V AXIS TRAVEL 3.54" X 3.54" MAX TAPER ANGLE 25 @ 3.14" HEIGHT WIRE DIAMETER 0.0059" TO 0.0118" DIMENSIONS 95" X 79" X 92" WEIGHT 6,358 LBS EQUIPPED WITH: WINDOWS XP PENTIUM GF MACHINING SOLUTION TECHNOLOGY 5-AXES CONTROLLER AUTO WIRE THREADING AUTO LUBRICATION SUBMERGED X AND Y GLASS SCALE FEEDBACK COLLISION PROTECTED X/Y/Z AXES 2 FILTER CARTRIDGES THERMOCUT SYSTEM POWER RECOVERY SWING TANK DOOR T-SHAPED BASE FRAME

2010 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER, S/N 111215, TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, TRAVEL DISTANCE, X-AXIS 420MM, Y-AXIS 320MM, Z-AXIS 305MM, DISTANCE FROM TABLE TOP SURFACE TO SPINDLE AND FACE, TABLE WORK AREA 200-505MM 8-20, WORK AREA SIZE 600 X 300 23.6 X 11.8, MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG., SPINDLE SPEED (MIN) 10-10,000, SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX., SPINDLE TAPER HOLE 7/24 TAPER NO.30, FEED RATE, RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN, CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN, Z AXIS 1-20,000 RPM, ATC, TOOL SHANK TYPE MAS.BT30, PULL STUD TYPE MAS.P30T-2, TOOL STORAGE CAPACITY (PCS) 14, MAX. TOOL LENGTH 200MM, DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM, 160-200/D40 MM, MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG., TOOL SELECTION METHOD RANDOM SHORT CUT, TOOL CHANGE TIME, TOOL TO TOOL .09, CHIP TO CHIP 1.7, MOTOR, SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7, FEED AXIS MOTOR 1.0 KW XY 1-5 KW Z, (CONT.), MACHINE DIMENSIONS, HEIGHT 2,588MM, INSTALLATION ARE 1,617 X 2,658 MM, (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM, WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG, EQUIPPED WITH, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, CHIP CONVEYOR, COOLANT SYSTEM, TWO NIKKEN CNC 180 4TH AXIS CNC ROTARY TABLES

2010 HAAS SUPER MINI MILL 2 CNC VERTICAL MACHINING CENTER, TABLE SIZE: 40" X 14", MAX TABLE LOAD: 500 LBS, X AXIS TRAVEL: 20", Y AXIS TRAVEL: 16", Z AXIS TRAVEL: 14", SPINDLE NOSE TO TABLE 4-18", SPINDLE SPEED: 10,000 RPM, SPINDLE MOTOR: 15 HP, SPINDLE TAPER: 40 CT, TOOL CHANGER STYLE: SIDEMOUNT, TOOL CHANGER POSITIONS: 24 + 1, EQUIPPED WITH: HAAS CNC CONTROL, 24 + 1 POSITION SIDE MOUNT ATC, RIGID TAPPING, THRU SPINDLE COOLANT, CHIP AUGER, S/N: 1078575

1988 OKAMOTO ACCUGAR 124N HYDRAULIC SURFACE GRINDER, S/N 7441, NEW 1988 - OKAMOTO ACCUGAR-124N 24"X 12"TABLE HYDRAULIC SURFACE GRINDER W/KANET MAG CHUCK, S/N 7441, NEW 1988, SPECIFICATIONS: TABLE SIZE: 24" X 12", MAX WORKPIECE HEIGHT: 13.7", MAX WORKPIECE WEIGHT: 930 LBS., TABLE LONGITUDINAL TRAVEL: 29.5", TABLE CROSS TRAVEL: 13.6", HYDRAULIC FEED: 1 FPM- 100 FPM, HAND FEED: 1.85", TABLE CROSS HYD INCREMENT: 0.2"- 0.8", TABLE CROSS HYD CONTINUOUS: 4 IPM- 40 IPM, TABLE CROSS HAND : 0.25", GRADUATION OF HANDWHEEL: 0.001", 12" DIAMETER GRINDING WHEEL, GRINDING WHEEL WIDTH: 1.5", GRINDING BORE: 5", MAGNETIC CHUCK MAGNETIC CHUCK CONTROL, 230/460 VOLT, EQUIPPED WITH, 12" X 24" ELECTRO MAGNETIC CHUCK AND CHUCK CONTROLS, OVERHEAD WHEEL DRESSER, DIGITAL READOUTS, COOLANT SYSTEM, INCREMENTAL DOWNFEED

8"X20" SUPERTEC PLAIN CYLINDRICAL GRINDER, S/N GB18032 - 8"X20" SUPERTEC PLAIN CYLINDRICAL GRINDER, S/N SPECIFICATIONS:, SWING OVER TABLE 8, DISTANCE BETWEEN CENTERS 20, MAX. LENGTH GRINDING BETWEEN CENTERS... 20, MAX. DIAMETER 8, SWING IN GAP NO GAP, OPENING IN GAP NO GAP, MAX. WEIGHT BETWEEN CENTERS 176 LBS., TAIL STOCK TAPER #3 MT, WHEEL SIZE 14 X X 5, MOTOR SIZE: MAIN SPINDLE 5 HP 220V 3 PHS, MOTOR SIZE: WORK HEAD 1/2 HP 220V 3 PHS, SPINDLE TAPER #3 MT, SPINDLE HEAD SWIVEL +/-45 DEGREES (WORK HEAD), AUTOMATIC INFEED . 0.00001 5.3, WEIGHT 4770 LBS., STANDARD EQUIPMENT:, AUTO LUBE, MANUAL DRESSING ATTACHMENT, WHEEL EXTRACTOR, GRINDING WHEEL W/ADJUSTING TOOLS, DIAMOND DRESSER, COOLANT SYSTEM, CARBIDE TIP CENTER, LEVELING SCREWS, SPLASH GUARD, HALOGEN WORK LIGHT, BALANCING ARBOR, 5C MANUAL COLLET CLOSER, MACHINE FEATURES:, SERVO MOTOR & BALL SCREW ON INFEED, MITSUBISHI PLC CONTROL, ONE V ONE FLAT TURCITE COATED GUIDE WAYS, WORK HEAD FIXED, CARTRIDGE TYPE WHEEL SPINDLE, TAIL STOCK, EQUIPPED WITH, FEATURES, GRINDING WHEEL, COOLANT SYSTEM WITH PAPER FILTER, AUTO LUBRICATION, MITSUBISHI PLC CONTROL WITH LCD TOUCH SCREEN (4 GRINDING MODES: SEMI-AUTO, SURFACE, PLUNGE, & CRISS-CROSS), HALOGEN LIGHT, DIAMOND WHEEL DRESSER, SPLASH GUARD, WHEEL EXTRACTOR, BALANCING ARBOR, CARBIDE TIP CENTERS, LEVELING SCREWS, 5C COLLET CLOSER, VARIABLE SPINDLE SPEED WHEELHEAD, 2 AXIS DRO,

2004 BUSCH MINK MM 1102 AV VACUUM PUMP, TYPE MM 1102 AV, V 105/135 M3/H, P 60 HPA (0.06 BAR), S/N: 04036723

2014 BROTHER TC-S2D 3-AXIS CNC DRILL TAP VERTICAL MACHINING CENTER, S/N 222804, SPECIFICATIONS, X-AXIS TRAVEL 19.7", Y-AXIS TRAVEL 15.7", Z-AXIS TRAVEL 11.8", DISTANCE BETWEEN TABLE TOP AND SPINDLE 7.1" TO 18.9", WORK AREA SIZE 23.6" X 15.7", MAX. TABLE LOAD CAPACITY 551 LBS., SPINDLE SPEEDS 10 TO 10,000 RPM, SPEED DURING TAPPING 6,000 RPM, SPINDLE TAPER BT-30, SPINDLE MOTOR 14 HP, TOOL STORAGE CAPACITY 14, CUTTING FEED RATE (X,Y) 04 TO 394 IPM, CUTTING FEED RATE (Z) 0.4-7.87 IPM, RAPID TRAVERSE RATE 1969 IPM, FLOOR 81"X 87" X 112"H, MACHINE WEIGHT 5,300 LBS., EQUIPPED WITH, CNC B00 CONTROLS, MISC. TOOL HOLDERS, COOLANT SYSTEM, 10,000 RPM SPINDLE, 14 POSITION ATC.

2017 AIRFLOW SYSTEMS MP30 MIST COLLECTOR 2,400 CFM S/N: 1057666 SPECIFICATIONS, CONSTRUCTION: 16 GA. ZINC COATED WELDED STEEL, POWDER COATED CABINET, BLOWER (HP): 3.0, NOISE LEVEL (DBA); 73 DBA(3HP), ELECTRICAL: 3.0 HP - 208-230/460/575/3/60, 9.2-8.0/4.0 AMPS, NOMINAL AIR FLOW (CFM): 2400, DIMENSIONS, WIDTH: 28.00, HEIGHT: 76.00, DEPTH: 29.00, *WAS CONNECTED TO AN INDEX MS-40 MULTI SPINDLE CNC LATHE

2015 STRUERS HEXAMATIC AUTOMATIC LABORATORY SPECIMEN PREP MACHINE GRINDING & POLISHING S/N: 59410041. EXTREME, VERSATILITY FOR THE PREPARATION OF BOTH INDIVIDUAL SPECIMENS AND SPECIMEN HOLDERS, WITH OR WITHOUT CONVEYOR, FOR THE UNINTERRUPTED PREPARATION OF LARGER SERIES OR THE FULLY AUTOMATIC PREPARATION OF INDIVIDUAL HOLDERS, IDEAL FOR THE PREPARATION OF MATERIALS REQUIRING DIFFERENT PREPARATION METHODS DUE TO THE AUTOMATIC EXCHANGE OF UP TO EIGHT DIFFERENT PREPARATION SURFACES, EASY AND FLEXIBLE SPECIMEN HANDLING, WITH HEXAMATIC WE HAVE BROUGHT FULLY AUTOMATIC SPECIMEN PREPARATION TO A NEW LEVEL, HEXAMATIC CAN PROCESS BOTH SPECIMEN HOLDERS AND SPECIMEN MOVER PLATES FOR INDIVIDUAL SPECIMENS, NO MATTER IF MANY SIMILAR SPECIMENS OR A FEW INDIVIDUAL SPECIMENS OF A CERTAIN TYPE HAVE TO BE PRODUCED, HEXAMATIC IS CAPABLE OF HANDLING THAT. SPECIMEN HOLDERS THAT CAN HOLD DIFFERENTLY SHAPED SPECIMENS, ARE PREPARED USING CENTRAL FORCE, WHEREAS INDIVIDUAL SPECIMENS IN SPECIMEN MOVER PLATES HAVE THE FORCE APPLIED INDEPENDENTLY. THIS ALLOWS FOR THE PREPARATION OF ONE TO SIX SPECIMENS WITHOUT THE NEED FOR DUMMIES., HEXAMATIC WITH CONVEYOR, WHEN LARGER AMOUNTS OF SPECIMENS HAVE TO PREPARED, HEXAMATIC WITH CONVEYOR IS THE IDEAL SOLUTION. WITH A CAPACITY OF EIGHT SPECIMEN HOLDERS OR SPECIMEN MOVER PLATES, HEXAMATIC CAN BE LOADED WITH MANY SPECIMENS TO BE PREPARED WITHOUT REQUIRING OPERATOR ATTENTION., WHILE THE MACHINE IS RUNNING, ALREADY PREPARED SPECIMENS CAN BE EVALUATED. THE EXCEPTIONAL DESIGN OF HEXAMATIC WITH THE EXTERNAL CONVEYOR ALLOWS REMOVING PREPARED SPECIMEN HOLDERS OR INSERTING UNPREPARED HOLDERS WITHOUT INTERRUPTING THE PREPARATION PROCESS., SENSORS AUTOMATICALLY DETECT INSERTED HOLDERS, AS SOON AS A SPECIMEN HOLDER OR SPECIMEN MOVER PLATE IS INSERTED IN THE CONVEYOR, BUILT-IN SENSORS AUTOMATICALLY DETECT THEIR PRESENCE. THIS IS INDICATED ON THE GRAPHICAL USER INTERFACE, AND A PREPARATION METHOD FOR EACH INDIVIDUAL HOLDER CAN EASILY BE SELECTED., HEXAMATIC WITHOUT CONVEYOR, WHEN SPACE OR THE REQUIREMENTS TO PREPARATION QUANTITY ARE LIMITED, HEXAMATIC IS ALSO AVAILABLE WITHOUT CONVEYOR., THE SPECIMEN HOLDER OR MOVER PLATE IS INSERTED DIRECTLY INTO THE PICK-UP BOWL INSIDE THE MACHINE, AND AFTER SELECTING THE APPROPRIATE METHOD THE ENTIRE PREPARATION IS CARRIED OUT FULLY AUTOMATICALLY, AUTOMATIC DRESSER, ON HEXAMATIC, THE DRESSER OPERATES FULLY AUTOMATICALLY AND DRESSES THE GRINDING STONE EITHER IN PRE-DEFINED INTERVALS OR WHENEVER THE REMOVAL RATE DECREASES., CONVEYOR WITH SAFETY COVER*, UP TO 8 SPECIMEN HOLDERS OR SPECIMEN MOVER PLATES CAN BE PLACED IN THE CONVEYOR AND PREPARED AUTOMATICALLY.(THIS MACHINE DOES NOT HAVE A CONVEYOR), PLANE GRINDING STATION, HEXAMATIC CAN BE USED EITHER WITH A GRINDING STONE OR A DIAMOND GRINDING DISC, DEPENDING ON THE MATERIAL TO BE PREPARED. HIGH SPEED PLANE GRINDING ALLOWS FOR THE SHORTEST POSSIBLE PREPARATION TIMES., RECIRCULATION COOLING UNIT FOR THE PLANE GRINDING STATION A 50 LITRE RECIRCULATION COOLING UNIT IS USED., BEACON, A BEACON IS MOUNTED ON TOP OF HEXAMATIC TO ALWAYS SHOW THE CURRENT STATE OF THE MACHINE., ELEVATOR FOR DISC EXCHANGE, HEXAMATIC HAS A BUILT-IN, AUTOMATIC DISC EXCHANGE. EIGHT DIFFERENT PREPARATION SURFACES ARE STORED IN THE ELEVATOR AND EXCHANGED ACCORDING TO THE SELECTED PREPARATION METHOD, TOUCH SCREEN, A LARGE 17" TOUCH SCREEN IS USED TO OPERATE HEXAMATIC. ALL FUNCTIONS ARE OPERATED FROM HERE, AND THE PROCESS FLOW CAN BE MONITORED IN DETAIL., BOTTLE COMPARTMENT, IN EIGHT BOTTLES ALL THE NECESSARY SUSPENSIONS AND LUBRICANTS ARE STORED. THE WEIGHT OF THE BOTTLES IS MONITORED CONTINUOUSLY AND THE OPERATOR IS INFORMED IF BOTTLES ARE RUNNING LOW., ADVANCED MONITORING FUNCTIONS FOR CONSISTENT PREPARATION RESULTS, THE REMAINING CONTENT OF THE BOTTLES IS CONTINUOUSLY MONITORED AND DISPLAYED., BOTTLE CONTENT IS MONITORED, ALL BOTTLES FOR THE DIFFERENT SUSPENSIONS AND LUBRICANTS USED DURING PREPARATION ARE PLACED ON WEIGHING CELLS. THE CONTENTS OF THE BOTTLES IS CONTINUOUSLY MONITORED AND DISPLAYED, AS SOON AS A NEW SPECIMEN HOLDER IS INSERTED AND THE, PREPARATION METHOD IS SELECTED, HEXAMATIC WILL CALCULATE THE AMOUNT OF SUSPENSION AND LUBRICANT NECESSARY. IF THE REMAINING AMOUNT IS NOT SUFFICIENT TO PREPARE ALL THE SPECIMENS IN THE CONVEYOR, THE USER WILL BE INFORMED TO TAKE APPROPRIATE ACTION., THIS PREVENTS UNNECESSARY STOPS DURING PREPARATION OR INSUFFICIENTLY PREPARED SPECIMENS DUE TO MISSING CONSUMABLES., WHEN THE SAME PREPARATION METHOD IS USED ALL THE TIME AND NOT ALL BOTTLES ARE UTILIZED, THE SAME SUSPENSION CAN BE FILLED INTO TWO BOTTLES AND HEXAMATIC WILL, AUTOMATICALLY START USING THE SECOND BOTTLE WHEN THE FIRST IS EMPTY., MONITORING OF ACCUMULATED PREPARATION TIME OF DISCS AND CLOTHS THE ACCUMULATED ACTUAL PREPARATION TIME OF EACH INDIVIDUAL GRINDING DISC OR, POLISHING CLOTH IS MONITORED AND DISPLAYED IN THE CONFIGURATION MENU. INDIVIDUAL LIFETIMES CAN BE SET FOR ALL PREPARATION DISCS, AND HEXAMATIC WILL PROMPT THE USER FOR EXCHANGE WHEN THA

2015 KOMO MACH ONE GT510 CNC ROUTER, S/N 01050-11, SPECIFICATIONS, FOUR-POLE, 16HP (12KW), 24,000 RPM, HSK 63F, FAN-COOLED SPINDLE, 12 POSITION AUTOMATIC TOOL CHANGER WITH AGGREGATE CAPABILITY, AIR BLAST FOR OPTIMAL DUST/CHIP EVACUATION AND COOLING OF THE CUTTING TOOL, DUAL HELICAL RACK DRIVE ON X/U AXES WITH SYNCHRONOUS AXIS CONTROL, TOOL TOUCH-OFF DEVICE WITH AUTOMATIC TOOL DATA UPLOADING, FANUC PANEL I CONTROL WITH HVI SERVO SYSTEM AND INTEGRATED PC, UNIVERSAL GRID FIXTURE TABLE AVAILABLE IN COMPOSITE (STANDARD) OR ALUMINUM (OPTION), PRESSURIZED AUTOMATIC CENTRALIZED LUBRICATION SYSTEM, KOMO PRODUCTION MANAGER WITH INTELLIGENT SPOIL BOARD MANAGEMENT, 17 TOUCH SCREEN DISPLAY CONSTRUCTION, FEA FINITE ELEMENT ANALYSIS ENGINEERED STRUCTURE, HEAVY-DUTY STEEL FABRICATION, CLOSED-LOOP COUNTERBALANCE SYSTEM MINIMIZES PLANT AIR CONSUMPTION, MACH ONE GT SERIES TECHNICAL DATA, SPINDLE (QUANTITY 1), TYPE.....16HP (12KW), FOUR-POLE, FAN COOLED, RPM.....UP TO 24,000, FULLY PROGRAMMABLE, TAPER.....HSK 63F, TABLES:, 510.....60 X 120 (1542MM X 3048MM), FOUR (4) 1 (25MM) PART LOCATION PINS, AGGREGATE-CAPABLE TOOL CHANGER, MAX QUANTITY...12 TOOLS, MAX DIAMETER......3.25 (82MM) POSITIONS FULL; 6.5 (165MM) ADJACENT POSITIONS EMPTY, MAX WEIGHT....12 LBS. EACH/80 LBS. (TOTAL) (5.4KG / 36.4KG), MAX LENGTH.....5 (127MM), FEED RATE/TRAVERSE X AXIS.....2100IPM (53.5MPM), Y AXIS.....2300IPM (58.5MPM), Z AXIS.....1200IPM (30.5MPM), ACC/DEC.....83.3 IN/SEC2, AXIS TRAVELS 510.....131 (3327MM) X 86 (2184MM) X 10 (254MM), 512.....155 (3937MM) X 86 (2184MM) X 10 (254MM), 524.....299 (7595MM) X 86 (2184MM) X 10 (254MM), POSITIONING:, ACCURACY.....0.0008 (0.02MM) UNIDIRECTIONAL LINEAR AXIS POSITIONING, PER METER, CONTROL SYSTEM FANUC PANEL I.....WITH INTEGRATED PC AND 17 TOUCH SCREEN DISPLAY, DUST COLLECTION:, INTERFACE.....6 (152MM) DIAMETER (RECOMMENDED VOLUME 900 CFM), VACUUM SYSTEM WITH LOW VACUUM SENSING INTERFACE, OPTIONS:, FANUC CNC CONTROL, VACUUM PUMPS 25 HP, MIST SYSTEM 1 HEAD 2 NOZZLES, RCIM AUTOMATION SUITE, AUTOCAD CAM COMPANION,

2012 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER, S/N 111879, SPECIFICATIONS:, X 16.5, Y 12.6, Z 12, RPM 10,000 RM, #ATC 14, TAPER 7/24 #30, CONTROL CNC-BOO, TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, TRAVEL DISTANCE, X-AXIS 420MM, Y-AXIS 320MM, Z-AXIS 305MM, DISTANCE FROM TABLETOP SURFACE TO SPINDLE AND FACE, TABLE WORK AREA 200-505MM 8-20, WORK AREA SIZE 600 X 300 23.6 X 11.8, MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG., SPINDLE SPEED (MIN) 10-10,000, SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX., SPINDLE TAPER HOLE 7/24 TAPER NO.30, FEED RATE, RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN, CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN, Z AXIS 1-20,000 RPM, ATC, TOOL SHANK TYPE MAS.BT30, PULL STUD TYPE MAS.P30T-2, TOOL STORAGE CAPACITY (PCS) 14, MAX. TOOL LENGTH 200MM, DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM, 160-200/D40 MM, MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG., TOOL SELECTION METHOD RANDOMS SHORT CUT, TOOL CHANGE TIME, TOOL TO TOOL .09, CHIP TO CHIP 1.7, MOTOR, SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7, FEED AXIS MOTOR 1.0 KW XY 1-5 KWZ, MACHINE DIMENSIONS, HEIGHT 2,588MM, INSTALLATION ARE 1,617 X 2,658 MM, (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM, WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG, EQUIPPED WITH, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, CHIP CONVEYOR, COOLANT SYSTEM

2011 WEEKE OPTIMAT BHX-500 CNC ROUTER PROCESSING CENTER, S/N 0-250-17-1875. MINIMUM LENGTH 200 MM, MAXIMUM LENGTH 2500 MM, MINIMUM WIDTH 70 MM, DRILLING DEPTH 38 MM MAX, SPEED 1,500 TO 7,500 RPM, CUTTING DEPTH 30 MM MAX, ROTATION SPEED 1,500 TO 7,500 RPM, SPEED 6,000 TO 18,000 RPM, LENGTH 8085 MM (26.5'), WIDTH 3651 MM (12'), Z-AXIS 50 M/MIN, X-AXIS (CLAMPS) 138 M/MIN, Y-AXIS 80 M/MIN, Z-AXIS (PRESSURE PLATE) 27 M/MIN, HEIGHT 2773 MM (109.2"), WEIGHT 5500 KG (12,125 LBS.), FREQUENCY 60 HZ. OVERVIEW: FOR SALE IS A USED WEEKE OPTIMAT BHX 500 CNC MACHINING CENTER, IDEAL FOR ROUTING, BORING, AND GROOVING OF FLAT PANEL COMPONENTS WITHOUT SPECIAL WORKPIECE FIXTURES. MANUFACTURED IN NORTHERN GERMANY, THIS MACHINE ADHERES TO HIGH-QUALITY STANDARDS AND USES WORLD-CLASS COMPONENTS. KEY FEATURES: MODEL: OPTIMAT BHX 500, WORKPIECE DIMENSIONS: MINIMUM LENGTH: 200 MM, MAXIMUM LENGTH: 2500 MM, MINIMUM WIDTH: 70 MM, MAXIMUM WIDTH: 1000 MM (1300 MM WITH PROCESSING RESTRICTIONS), MINIMUM THICKNESS: 8 MM (OR 2 PARTS X 4 MM), MAXIMUM THICKNESS: 80 MM (OR 2 PARTS X 40 MM), CONSTRUCTION: RIGID STEEL FRAME WITH WELDED STEEL PLATES, THK LINEAR MOTION GUIDES FOR X-, Y-, AND Z-AXES, ZERO-BACKLASH, PRE-LOADED HELICALLY GROUND RACK AND PINION GEAR SYSTEM (X-AXIS), HIGH PRECISION BALL SCREWS (Y- AND Z-AXES), SOLID STATE DRIVES AND DIGITAL AC SERVO MOTORS, WORKPIECE CLAMPING AND SUPPORT: TWO WORKPIECE CLAMPING DEVICES WITH INTEGRATED STOP SYSTEM (TBO - TOP-BOTTOM OPEN), DIGITAL AC SERVOMOTORS FOR POSITIONING, AUTOMATIC MEASURING OF WORKPIECE THICKNESS AND LENGTHS, RIGID ALUMINUM CAST CONSTRUCTION FOR BOTH LOWER AND UPPER PROCESSING SUPPORTS, INTEGRATED THREEFOLD DIVIDED TABLE WITH SELECTABLE AIR CUSHION, MACHINING CAPABILITIES: VERTICAL BORING BLOCKS: 2 BLOCKS WITH 36 SPINDLES EACH, DRILLING DEPTH: 38 MM MAX, SPEED: 1,500 TO 7,500 RPM, HORIZONTAL DRILLING BLOCKS: 2 BLOCKS WITH 10 SPINDLES EACH, DRILLING DEPTH: 38 MM MAX, SPEED: 1,500 TO 7,500 RPM, GROOVING SAWS: CUTTING DEPTH: 30 MM MAX, ROTATION SPEED: 1,500 TO 7,500 RPM, VERTICAL ROUTER MOTORS: 2 MOTORS WITH 6.0 KW POWER EACH, SPEED: 6,000 TO 18,000 RPM, DUST EXTRACTION: CONNECTION FOR CUSTOMER-PROVIDED DUST EXTRACTION DEVICE, CONTROL SYSTEM: POWER CONTROL: PLC CONTROL SYSTEM WITH WINDOWS XP EMBEDDED, INTEL CORE 2 DUO PROCESSOR WITH 17 TFT-FLAT SCREEN, SOFTWARE: WOODWOP 6.1, TOOL DATA BASE, PRODUCTION LIST SOFTWARE, MACHINE DATA, RECORDING, ETHERNET CONNECTION FOR REMOTE DIAGNOSTICS, UPS FOR PC WITH MORE THAN 5 AXES, BARCODE SOFTWARE (WOODSCAN) FOR 1D/2D BARCODE READING, TECHNICAL SPECIFICATIONS: DIMENSIONS: LENGTH: 8085 MM (26.5'), WIDTH: 3651 MM (12'), HEIGHT: 2773 MM (109.2"), WEIGHT: 5500 KG (12,125 LBS.), POSITIONING SPEED:

2013 DOOSAN PUMA 2100Y 3-AXIS CNC TURNING CENTER W/LIVE TOOLING C&Y AXIS, S/N: ML0093-000386, DOOSAN-FANUC I SERIES CNC CONTROL, 10.4 COLOR LCD DISPLAY, C & Y AXIS CAPABILITY, 8 3-JAW CHUCK, SERVO CONTROLLED FULL C-AXIS SPINDLE, 12 STATION LIVE TOOL TURRET, PARTS CATCHER, USB DRIVE, PCMCIA CARD SLOT, RIGID TAPPING, TOOL PRE-SETTER, TAILSTOCK, COOLANT SYSTEM, CHIP CONVEYOR, DOOSAN PUMA 2100Y, CAPACITY: MAX TURNING DIAMETER : 16.0, MAX SWING OVER BED : 30.7, MAX SWING OVER SADDLE : 24.8, MAX TURNING LENGTH: 20.5, MAX BAR CAPACITY : 2.6, DISTANCE BETWEEN CENTER: 24, TRAVELS: X AXIS TRAVEL : 10.2, Z AXIS TRAVEL : 23.2, Y AXIS TRAVEL: 5.25( +/- 2.62), C AXIS: 360 (0.001), RAPID TRAVERSE X AXIS: 1181 IPM, RAPID TRAVERSE Z AXIS: 1181 IPM, RAPID TRAVERSE Y AXIS: 393 IPM, SPINDLE: SPINDLE NOSE: A2-6, SPINDLE BORE: 3.0, SPINDLE SPEED: 5000 RPM, SPINDLE MOTOR: 15 HP, TURRET: TURRET CAPACITY: 12 STATION, TURRET INDEX TIME: 0.15 SECOND, LIVE TOOL POWER: 7.5 HP, TURRET INDEXING TIME: 0.15 SEC, TAILSTOCK: TAILSTOCK QUILL DIA: 3.1, TAILSTOCK QUILL STROKE: 3.93, TAILSTOCK BODY TRAVEL: 23.2, TAILSTOCK TAPER: MT-4, GENERAL: POWER SOURCE: AC 220V / 3-PHASE / 60 HZ, POWER REQUIREMENT: 36.26 KVA, OVERALL DIMENSIONS: 125.6 X 76.6 X 85.2 HIGH, MACHINE WEIGHT: 12,015 LBS. APPROX., EQUIPPED WITH, DOOSAN-FANUC I SERIES CNC CONTROL, 10.4 COLOR LCD DISPLAY, C & Y AXIS CAPABILITY, 8" 3-JAW CHUCK, SERVO CONTROLLED FULL C-AXIS SPINDLE, 12 STATION LIVE TOOL TURRET, PARTS CATCHER, USB DRIVE, PCMCIA CARD SLOT, RIGID TAPPING, TOOL PRE-SETTER, TAILSTOCK, COOLANT SYSTEM, CHIP CONVEYOR, 5 LIVE TOOLS AND MISC. STATIC TOOLS INCLUDED AS PICTURED, BAR FEED INTERFACE

SAMCHULLY POWERGRIP 18" CHUCK MODEL HC-18, S/N 64013, SPECIFICATIONS DIAMETER 18"

1.25" DRILLMATION BOREMATION KNEE TYPE GUN DRILL, S/N 408, SPECIFICATIONS, TABLE 48" X 18", MAX DIA. HOLE DRILLED 1.25", MAX DRILLING DEPTH 36", VERTICAL ADJUSTMENT 9", # SPINDLES 1, SPINDLE SPEED 2260 RPM, MOTOR 12.5 HP, EQUIPPED WITH, DRO PRO5 3M DIGITAL READ OUT, COOLANT SYSTEM

2005 BECKER VTFL 400 15 HP VACUUM PUMP TYPE VTLF 400, 900 RPM, 15 HP, 400 M3/H, 250 MBAR, S/N: 2038144

2012 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER S/N: 111878, SPECIFICATIONS, X 16.5, Y 12.6, Z 12, RPM 10,000 RPM, #ATC 14, TAPER 7/24 #30, CONTROL CNC-BOO, TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, TRAVEL DISTANCE, X-AXIS 420MM, Y-AXIS 320MM, Z-AXIS 305MM, DISTANCE FROM TABLETOP SURFACE TO SPINDLE AND FACE, TABLE WORK AREA 200-505MM 8-20, WORK AREA SIZE 600 X 300 23.6 X 11.8, MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG., SPINDLE SPEED (MIN) 10-10,000, SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX., SPINDLE TAPER HOLE 7/24 TAPER NO.30, FEED RATE, RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN, CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN, Z AXIS 1-20,000 RPM, ATC, TOOL SHANK TYPE MAS.BT30, PULL STUD TYPE MAS.P30T-2, TOOL STORAGE CAPACITY (PCS) 14, MAX. TOOL LENGTH 200MM, DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM, 160-200/D40 MM, MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG., TOOL SELECTION METHOD RANDOM SHORT CUT, TOOL CHANGE TIME, TOOL TO TOOL .09, CHIP TO CHIP 1.7, MOTOR, SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7, FEED AXIS MOTOR 1.0 KW XY 1-5 KWZ, MACHINE DIMENSIONS, HEIGHT 2,588MM, INSTALLATION IS 1,617 X 2,658 MM, (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM, WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG, EQUIPPED WITH, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, CHIP CONVEYOR, COOLANT SYSTEM

2016 CROMAR L32 MODEL S427801B COMBI 500 SWARF CHIP CONVEYOR, S/N 26038, SPECIFICATIONS, MODEL: S427801B, PART REF: L32 COMBI 500, YEAR: 2016, SERIAL NUMBER: 26038, WEIGHT: 250KG, CAME OFF A CITIZEN L32 CNC SLIDING HEADSTOCK LATHE

17,600 CFM DONALDSON TORIT MODEL ADMC-AD8 DRYFLO 8 CARTRIDGE DUST COLLECTOR, S/N 1G612837-001, SPECIFICATIONS: 40 HP BLOWER MOTOR

2010 FANUC ROBODRILL ALPHA T21IFLA CNC DRILL TAP VERTICAL MACHINING CENTER W/PALLET CHANGER S/N P105XH241 - FANUC ROBODRILL ALPHA T21IFLA CNC DRILL TAP VERTICAL MACHINING CENTER W/PALLET CHANGER, S/N P105XH241, NEW 2010, SPECIFICATIONS, ELECTRICS: 220 VOLT; 3 PHASE; 50-60 CYCLE; 11 KVA, FEATURES AND SPECIFICATIONS, ...CNC CONTROL: FANUC SERIES 31I-A5, ...TABLE SIZE: 33.5" X 16.1", ...TABLE CAPACITY:, ...TRAVELS:, ......X-AXIS: 27.5", ......Y-AXIS: 15.75"", ......Z-AXIS: 12.99"", ...SPINDLE SPECIFICATIONS:, ......SPEED: 10,000 RPM, ......TAPER: BT-30, ...TOOL CHANGER CAPACITY: 21 SLOTS, ...RAPID TRAVERSE RATE: 2,125 IPM, ...TOOL CHANGE TIME: 0.9 SECONDS, ...A-B PALLET SHUTTLE UNIT, ...COOLANT SYSTEM, ROBODRILL DIMENSIONS (APPROX.): 110" X 80" X 96", OVERALL EQUIPMENT WEIGHT (APPROX.): 6,000 LBS.,

2005 HAAS VF-3 CNC VERTICAL MACHINING CENTER S/N 41157, SPECIFICATIONS, TRAVELS, X 40", Y 20", Z 25", TABLE, WIDTH 18", LENGTH 48", MAX. WEIGHT ON TABLE 3,500 LBS., T-SLOTS WIDTH .625", T-SLOTS CENTER DISTANCE 3.15", SPINDLE, TAPER SIZE #40, SPEEDS 10,000 RPM, TRANSMISSION DUAL DRIVE, VECTOR DRIVE, BEARINGS ABEC CLASS 7, BEARING LUBRICATION AIR / OIL INJECTION, RAPID FEEDS, X, Y, Z 500 IPM, WEIGHT (EST) 12,500 LBS., OVERALL DIMENSIONS 118" W X 110" F-B X, 117.5" H, MOTOR SPECIFICATIONS, 20 HP SPINDLE DRIVE MOTOR, 3 HP AXIS MOTORS, EQUIPPED WITH, HAAS 32 BIT CNC CONTROLS WITH CRT SCREEN, 20 POSITION AUTOMATIC TOOL CHANGER, 10,000 RPM, 1 MEG MEMORY, VECTOR DRIVE - 20HP, CHIP AUGER, COOLANT THRU SPINDLE, 4TH AXIS DRIVE, ONLY RAN ALUMINUM

2013 SCM ACCORD FX-M 3-AXIS CNC ROUTER, S/N AA2/002685, MACHINING CENTER EQUIPPED WITH THE HIGH-PERFORMANCE SCM MULTIFUNCTION WORKTABLE IN ALUMINUM, FOR PRODUCTION OF HIGH FLEXIBILITY AND REGARDLESS OF FORM, WHICH REQUIRE HIGH STANDARDS OF ACCURACY. OPTIMAL SOLUTIONS TO MEET THE SPECIFIC NEEDS OF A FLEXIBLE PRODUCTION WITH NESTING TECHNOLOGY AND SUITABLE TO PROCESS PANELS OF DIFFERENT MATERIALS: LAMELLAR WOOD, PLYWOOD, CHIPBOARD, MDF, ETC., ADVANTAGES, MAXIMUM PRECISION ON THE ENTIRE MACHINING AREA THANKS TO THE RIGID MOBILE GANTRY., REDUCTION OF DOWNTIMES WITH TOOL CHANGE ON BOARD ALLOWING THE REPLACEMENT OF THE TOOL IN MASKED TIME., HIGHER PRODUCTIVITY WITH THE OPTION FOR PENDULUM MACHINING WITH NO SIZE LIMITS IN TOTAL ERGONOMICS., MAXIMUM FREEDOM OF MOVEMENT IN TOTAL SAFETY WITH NO CARPETS ON THE FLOOR WITH THE NEW SYSTEMS PRO SPEED AND PRO SPACE, SCAVENGERY, HIGH PERFORMANCE AND ENERGY SAVING., TECHNICAL DATA, X-AXIS WORKING AREA MM FROM 3650, Y-AXIS WORKING AREA MM FROM 1320, COMPONENT PASSAGE MM 250, ELECTRO SPINDLE POWER KW FROM 8,5 TO 13, TOOL-CHANGER NR. POSITIONS FROM 16, CNC MACHINING CENTER, AXES, X-Y AXES SPEED M/MIN 90, WORKPIECE PASSAGE MM 250, ELECTRO-SPINDLE, 3- AND 4-AXIS ELECTRO-SPINDLES POWER KW 8,5 - 12 - 13, MAX. ROTATION RPM 24.000, SOFTWARE VERSION : XILOG PLUS, HAND HELD CONTROLLER, 2 ZONE VACUUM TABLE, VACUUM PUMP, SUCTION OPENING DIAMETER MM 1 X 100 - 1 X 250, SUCTION AIR SPEED M/SEC 25, SUCTION AIR CONSUMPTION M3/HR 1300 / 4400, COMPRESSED AIR CONSUMPTION NL/MIN 170 - 300, MACHINE WEIGHT KG 6200

2006 OKUMA LOC 650 TWIN TURRET CNC CHUCKER LATHE WITH 7" BORE5 - CHUCK SIZE 24" THRU HOLE 7.28" SWING OVER BED 31.5" MAX TURNING DIAMETER-UPPER 25.59" MAX TURNING DIAMETER-LOWER 19.69" Z-AXIS TRAVEL 56.1" SPINDLE MOTOR 60 HP SPINDLE SPEEDS 5-500 RPM TURRET STATIONS 12 UPPER / 8 LOWER OKUMA OSP E100L 24" CHUCK (2) TURRETS CHIP CONVEYOR COOLANT SYSTEM MIST COLLECTOR TOOL SETTER TOOLING PICTURED INCLUDED RELEASED FROM AEROSPACE PLANT, ONLY CUT ALUMINUM

2008 ELUMATEC DG104 DOUBLE CUT MITRE SAW COLD SAWS S/N: 31-234 MACHINE TYPE: COLD SAWS MAKE: ELUMATEC MODEL: DG-104/02 BED LENGTH: 4,500MM/177 MINIMUM CUTTING LENGTH AT 90: 13.7795 MINIMUM CUTTING LENGTH TILTED AT 45: 13.7795 PIVOTING RANGE INWARDS: 90 45, (UP TO 22.5 MANUAL WITH DIGITAL DISPLAY), TILTING RANGE INWARDS: PNEUMATICALLY 90 45, SAW BLADE DIAMETER: 16.5354 SAW BLADE SPEED: 2,800 RPM POWER SUPPLY: 230/400 V, 3~, 50 HZ POWER OUTPUT PER MOTOR: 4 KW COMPRESSED AIR SUPPLY: 7 BAR AIR CONSUMPTION PER WORKING CYCLE: 40 WITHOUT SPRAYING, 64 WITH SPRAYING, ELUMATEC E-570 CONTROLLER, (2) ELUMATEC E-110 DIGITAL DISPLAY

2008 OKUMA MILLAC 852V LARGE CNC 3-AXIS 50 TAPER VERTICAL MACHINING CENTER, S/N 672928, NEW 2008, SPECIFICATIONS, X AXIS TRAVEL:, 80.71", Y AXIS TRAVEL:, 33.46", Z AXIS TRAVEL:, 29.53", SPINDLE MOTOR:, 30 HP, SPINDLE SPEED:, 6,000 RPM, SPINDLE TAPER:, 50 CT, TOOL CHANGER:, 36 ATC, RAPID RATE X AXIS:, 630 IPM, RAPID RATE Y AXIS:, 630 IPM, RAPID RATE Z AXIS:, 630 IPM, MAX TOOL WEIGHT:, 44.0 LBS, MAX TOOL DIAMETER:, 4.72" FULL, TOOL CHANGE TIME:, 2.5 SEC, SPINDLE NOSE TO TABLE:, 7.87 37.4" MAX, SPINDLE CENTER TO COLUMN:, 35.43, TABLE SIZE:, 86.6" X 35.24", DIMENSIONS:, 205.4" X 166.8" X 124.44", WEIGHT:, 33,069 LBS, EQUIPPED WITH, OKUMA OSP P200M CNC CONTROL, 86" X 35" TABLE, 6000 RPM 50 TAPER SPINDLE, HIGH PRESSURE COOLANT, 36 POSITION TOOL CHANGER, CHIP CONVEYOR

2020 ISEL EUROMOD MP45 CNC ROUTER S/N: 763851/1 THE COMPACT ONE, THE CNC MILLING MACHINE EUROMOD IS A READY-TO-CONNECT CNC SYSTEM OFFERING A HIGH OPERATING COMFORT FOR A VARIETY OF TASKS AND APPLICATIONS. THE MECHANICAL BASIS IS FORMED BY STABLE, LOW-VIBRATION COMPONENTS MADE OF ALUMINUM-STEEL CONNECTIONS. THE BALL SCREW DRIVES WITHOUT CLEARANCE USED IN THE LINEAR AXES ENSURE A HIGH LEVELS OF ACCURACY. DURING THE DEVELOPMENT OF THE EUROMOD CNC MILLING MACHINE, SPECIAL EMPHASIS WAS PLACED ON A SMALL FOOTPRINT. THE MAINTENANCE-FREE SERVOMOTORS USED ARE IDEALLY MATCHED TO THE MECHANICS, POWER ELECTRONICS, AND CONTROLS. A NUMBER OF POWERFUL MILLING SPINDLES FROM OUR RANGE ARE AVAILABLE FOR THE EUROMOD. THE MILLING SPINDLES ARE USED IN STANDARD 3-AXIS APPLICATIONS, BUT 3 + 2-AXIS MACHINING EQUIPPED WITH A TURN-SWIVEL UNIT IS NO PROBLEM FOR THE EUROMOD. FEATURES, POWERFUL ISEL CONTROL, WITH MAINTENANCE-FREE SERVOMOTORS, RELIABLE LES UNITS, WITH STEEL BALL SCREWS INSTALLED AS DRIVES, PILZ SECURITY TECHNOLOGY, EASY TO USE THANKS TO THE HEIGHT-ADJUSTABLE CNC PANEL, NETWORK-COMPATIBLE CONTROL PC WITH WIN 10, PARALLEL SLIDING DOOR, CLAMPING OF THE WORKPIECES BY MEANS OF A T-SLOT PLATE, TECHNICAL DATA, OPTIONS AVAILABLE, ISA MILLING SPINDLES AND WATER-COOLED HF MILLING SPINDLES, ROUND AND LINEAR TOOL CHANGING STATIONS, COOLING SPRAY DEVICE, COLD AIR COOLING, COOL-MIN, AUTOMATIC TOOL LENGTH MEASUREMENT, MILL BREAKAGE CONTROL, ELECTRONIC HANDWHEEL, PNEUMATIC SLIDING DOOR, ROTATION UNITS, SAFETY LIGHT CURTAIN, CLOSED AND/OR LIGHT-TIGHT HOOD FOR LASER APPLICATIONS, HOOD ATTACHMENT WITH INCREASED PORTAL PASSAGE, WORKPIECE CLAMPING SYSTEMS (HAND LEVER, VACUUM CLAMPING TABLES, ETC.), EXTRACTION SYSTEMS, LED ENGINE ROOM LIGHTING, RAL COLOUR SELECTION, PC CONTROL PANEL WITH FREE PCI SLOTS (FOR THE USE OF EXTERNAL PCI HARDWARE), INTERFACE ADJUSTMENTS, CAD/CAM SOFTWARE, EUROMOD MP45, TRAVEL RANGES X/Y [MM] 610/470, Z STROKE [MM]* 300, Z PASSAGE [MM]* 365, TABLE CLAMPING AREA WXD [MM] 900 X 500, DIMENSIONS WXDXH [MM] 1205 X 1155 X 2123, WITH SWITCH CABINET & OPEN 1452 X 1155 X 2418, TRAVEL SPEED X/Y/Z MAX. 15 M/MIN., DRIVE MOTORS MAINTENANCE-FREE EC/AC SERVOMOTORS, DRIVE ELEMENTS X/Y/Z BALL SCREW DRIVE, SET WITHOUT CLEARANCE, CONTROL CAN CONTROLLER IMD EQUIPPED WITH 3 AND/OR 4 DRIVE CONTROLLERS WHICH ARE EXPANDABLE TO 12 AXES (MAX. 6 INTERPOLATED & 6 HANDLING AXES), PC, I/O MODULE, SAFETY CIRCUIT EQUIPPED WITH STANDSTILL MONITORING, POWER SUPPLY 48 V / 1000 W, OPERATION CONTROL PANEL IOP-19 TOUCHSCREEN EQUIPPED WITH KEYBOARD AND TOUCHPAD, SOFTWARE WINREMOTE (OPTIONAL: PRONC, ISY-CAM), WEIGHT [KG] APPROX. 550, ELECTRICAL SPECIFICATIONS 230V, 16A, PART NO. 278011 363443*, *WITHOUT INSTALLED COMPONENTS ON THE AXES., EQUIPPED WITH, PURCHASED NEW 2020 NEW COST APPROX. $32,000, APPROX, 1,500 HOURS, P/N 278011, 363443 CNC - BASIC MACHINE, EUROMOD 45, DL360 - ZH310 - X10/Y10/Z5, G - SU - ST - 230V/16A, P/N 310708, 1611 SPINDLE MOTOR ISA750 W. FREQU., CONVERTER, 24000 RPM, 750W, COLLET ER16 / 6 MM, CABLE 8M, P/N 277028, MOUNTING PLATE FOR Z-AXIS, FLATCOM / EUROMOD / LES 21, FOR ISA 500 AND ISA 750, INCL. MOUNTING MATERIAL, P/N 239099 0001, LENGTH CALIPER, FOR MEASURING LENGTH OF TOOLS.

2010 ELUMATEC SBZ-122/33 CNC PROFILE MACHINING CENTER/ROUTER, S/N 1223330311, SPECIFICATIONS, STANDARD TABLE AREA 144", TABLE CAPACITY, X-AXIS ROUTING CAPACITY FACE SIDE 151.6", TABLE CAPACITY, Y-AXIS 13.75", ROUTING CAPACITY TOP 9", ROUTING CAPACITY FRONT 7", TABLE CAPACITY Z-AXIS 11", ROUTING CAPACITY TOP 11", STEP OVER CAPACITY 7.3", RAPID POSITIONING Y-Z AXES (MAX.) 1,176"/MIN, RAPID POSITIONING X-AXES (MAX.) 1,968"/MIN, MAX. SPINDLE SPEED 24,000 RPM, POWER OUTPUT, ROUTER SPINDLE 10 HP,480 VOLT, 3, PHASE, MAX. PROFILE HEIGHT/STE OVER MAX. 11", SOFTWARE FORCED FRONT/REAR MACHINING NO STEP OVER FROM FRONT TO REAR OF PROFILE, HEAD RUNS AROUND ZERO POINT., MAX. DIAMETER OF TOOLING 2.4", MAX. DIAMETER OF DISK CUTTER, MANUAL 7.87", AUTOMATIC 3.62", MAX. AIR PRESSURE 102 PSI, MAX. LENGTH OF TOOLING (TOP) 7.9", MAX. DIA. SHAFT FOR ER-32 COLLET .78", MAX. DIA. SHAFT FOR ER-16 COLLET (ANGLE HEAD CAP COLLET) .511", MAX. DIA. SHAFT FOR 077 COLLET .394", TAPPING CAPACITY UP TO (W/FLOAT COLLET -ER32 COLLET SIZE) 0.375" @ 65% THREAD, TOOL CHUCK HSK F63, TOOL HOLDER FOR AUTO TOOL CHANGE 6 POSITION, OVERALL MACHINE BASE DIMENSIONS 62" X49.5", LIGHT CURTAIN WIDTH 181.3"L X 88"H, MACHINE WEIGHT (APPROX.) 4,505 LBS., EQUIPPED WITH, PC BASED CONTROL WINDOWS XP, DEFENDER LIGHT CURTAINS, MACHINING 3 SIDES OF PROFILE, LINEAR GUIDE FOR X Y Z TRAVEL, PROFILE IS HELD BY ADJUSTABLE PNEUMATIC CLAMPS, AUTOMATIC TOOL CHANGER W/5 TOP TOOL HOLDERS & 1 ANGLE HEAD, HORIZONTAL PNEUMATIC CLAMPS, PULSE SPRAY MIST COOLANT SYSTEM, TOOL HEIGHT GAUGE, HAND HELD MOBILE CONTROL

2014 HAAS VF-12/40 CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 1116017, SPECIFICATIONS, X 150, Y 32, Z 30, POWER 30 HP, RPM 8,100, ATC #24, TAPER CT40, TABLE-W 150, TABLE-L 28, # AXIS 4, EQUIPPED WITH, 8,100 RPM CT40 SPINDLE, 24 POSITION ATC, HAAS HRT-210 4TH AXIS ROTARY TABLE, PROGRAMMABLE COOLANT, RIGID TAPPING, THROUGH SPINDLE COOLANT, WIPS WIRED WITH RECEIVER (NO PROBES)

2017 LNS SN542 S2 BARFEED S/N: 15844505 DIAMETER 5 - 42 MM, BAR LENGTH 12 FT, LOADING CAPACITY 28 X 10 MM, HEADSTOCK TYPE SLIDING, MAX. REMNANT LENGTH 420 MM, EQUIPPED WITH 36MM CHANNELS, 35MM PUSHER, INTERFACED WITH CITIZEN SLIDING HEADSTOCK

2007 HAAS VF-3SS 5-AXIS CNC VERTICAL MACHINING CENTER, SPECIFICATIONS, TRAVELS:, X 40", Y 20", Z 25", TABLE:, LENGTH 48", WIDTH 18", MAX. WEIGHT ON TABLE 1750 LBS., SPINDLE:, SPEED 12,000 RPM, DRIVE SYSTEM INLINE DIRECT DRIVE, MAX. RATING 30 HP, MAX. TORQUE 90FT-LB @ 2,000 RPM, FEEDRATES: (MAX. RAPIDS), X-AXIS 1400 IPM, Y-AXIS 1400 IPM, Z-AXIS 1400 IPM, TOOL CHANGER:, CAPACITY 24+1, TYPE CT 40, MAX. TOOL DIA. 3.0", TOOL-TO-TOOL 1.6 SEC., CHIP-TO-CHIP 2.2 SEC., MACHINE WEIGHT 12,500 LBS., EQUIPPED WITH, HAAS CNC CONTROLS, 5-AXIS TRUNNION 6.3" DIA. MODEL STR210H, SIDE MOUNT 24 POSITION AUTOMATIC TOOL CHANGER, 12,000 RPM INLINE DIRECT DRIVE SPINDLE, CHIP CONVEYOR, THRU SPINDLE COOLANT, HIGH SPEED MACHINING, RIGID TAPPING, SPLASH GUARDS, COORDINATE ROTATION & SCALING, INTUITIVE PROGRAMMING SYSTEM, PROGRAMMABLE COOLANT NOZZLE, REMOTE JOG HANDLE, WIRELESS PROBE SYSTEM (NO PROBE), TOOL SETTER, SPINDLE ORIENTATION, MACROS, S/N: 1066190

2010 FANUC ROBODRILL ALPHA T21IFLA CNC DRILL TAP VERTICAL MACHINING CENTER W/PALLET CHANGER S/N: P105XH229, ELECTRICS: 220 VOLT; 3 PHASE; 50-60 CYCLE; 11 KVA, CNC CONTROL: FANUC SERIES 31I-A5, TABLE SIZE: 33.5" X 16.1", TRAVELS: X-AXIS: 27.5", Y-AXIS: 15.75", Z-AXIS: 12.99", SPINDLE SPECIFICATIONS: SPEED: 10,000 RPM, TAPER: BT-30, TOOL CHANGER CAPACITY: 21 SLOTS, RAPID TRAVERSE RATE: 2,125 IPM, TOOL CHANGE TIME: 0.9 SECONDS, A-B PALLET SHUTTLE UNIT, COOLANT SYSTEM, ROBODRILL DIMENSIONS (APPROX.): 110" X 80" X 96", OVERALL EQUIPMENT WEIGHT (APPROX.): 6,000 LBS.

2004 THERMWOOD CS40 3-AXIS CNC ROUTER S/N CS400430904, TABLE W 48", TABLE L 96", POWER 10 HP, RPM 18,000 RPM, TAPER 30, # AXIS 3, CONTROL CNC (QCORE SUPER CONTROLLER), MOVING TABLE STYLE: TABLE SIZE 48"X96", TRAVELS X100", Y 61", Z 7.8", FEED RATES: X 2100 IPM, Y 1200 IPM, Z 1200 IPM, SPINDLE TYPE HSD MODEL 919 BT30, ROUTER 10.5 HP, ROUTER SPEED 5000-18,000 RPM, EQUIPPED WITH: QCORE CNC SUPER CONTROLLER, THN OS SOFTWARE VERSION #9.0, 4'X8' TABLE, 5 POSITION AT THE HEAD TOOL CHANGER, 4 POSITION BAR TYPE TOOL CHANGER, AUTOMATIC TOOL LENGTH MEASURING DEVICE, MANUAL POP UP PINS, 10 HP HSD SPINDLE MODEL 919, VACUUM PUMP.

2012 BIESSE ROVER A 1332 ATS POD AND RAIL 4-AXIS CNC ROUTER, S/N 35171, SPECIFICATIONS, WORKING FIELD:, X - AXIS: 3280MM (129.1"), Y - AXIS: 1320MM (52"), Z - AXIS: 170MM (7"), (6) ATS PANEL SUPPORT RAILS, BIESSE'S ATS (AUTO LOCATING PODS), PANEL LIFT SUPPORTS FOR LOADING & UNLOADING OF SHEETS, MULTI ZONE WORKING AREAS, FRONT, REAR & SIDE STOPS, 17.7 HP HSD ELECTRO SPINDLE (HSKF63), 12 POSITION ROTARY TOOL CHANGER, BH 17L BORING HEAD W/ QUICK CHANGE SYSTEM, (10) VERT. SPINDLES (7 IN X & 3 IN Y), (3) HORZ. SPINDLES (2 IN X & 1 IN Y), SAW BLADE UNIT 120MM, AUTO LUBRICATION, REMOTE KEYBOARD CONTROLS, PC DRIVEN XP600 CONTROL, WINDOWS XP OPERATING SYSTEM, PC COMPUTER W/19" COLOR MONITOR, CD -ROM READER, 20 GB HARD DISK W/KEYBOARD & MOUSE, BECKER VACUUM PUMP, B-SOLID SOFTWARE INCLUDED., 9070440 WORKING FIELDS, WORKING FIELD: X = 3.280 MM; Y = 1.320 MM; Z = 170 MM WITH H=48 MM MODULES, AXIS STROKE: X = 3722 MM; Y = 1993 MM; Z = 324 MM, WORK TABLE, "ATS" (ADVANCED TABLE SETTING), IS A BIESSE IS THE MOST ADVANCED TABLE DESIGN THAT ALLOW EASY AND FAST TABLE SET-UP WITHOUT LIMITATIONS IN THE POSITIONING, ORIENTATION AND INTERCHANGEABILITY OF THE VACUUM MODULES., THE "ATS" EXCELS IN VERSATILITY AND FLEXIBILITY FEATURING A WIDE RANGE OF STANDARD AND/OR CUSTOM FIXTURING SOLUTIONS, ., IN THE PICTURE SOME OF THE AVAILABLE HOLD-DOWN OPTIONS NOT INCLUDED, 73006076 ATS PANEL SUPPORTS - L = 1280MM - 24 SLIDING BASES, THE WORK AREA IS COMPOSED OF:, 6 ALUMINUM PANEL SUPPORTS. THE SUPPORTS SLIDE ON HARDENED AND GROUND LINEAR GUIDES BY MEANS OF BALL RUNNERS. THE LOCKING TAKES PLACE ON BOTH THE FRONT AND THE BACK LINEAR GUIDE , BY MEANS OF 2 PNEUMATIC CYLINDERS, AND IS CONTROLLED THROUGH A PUSH-BUTTON PLACED IN FRONT OF THE PANEL SUPPORT, 1 METRIC SCALE ALONG THE "X" AXIS, FOR A CORRECT POSITIONING OF THE PANEL SUPPORTS, 6 METRIC SCALES ALONG THE "Y" AXIS, FOR A CORRECT POSITIONING OF THE PANEL LOCKING DEVICES, 24 SLIDING BASES WITH DIMENSIONS 132 X 132 X H 41.5 MM WITH INDEPENDENT PNEUMATIC LOCKING . EACH BASE IS PREARRANGED FOR THE INSTALLATION OF LOCKING MODULES FOR PIECES WITH DIFFERENT SHAPES AND DIMENSIONS , AND ALLOWS TO ROTATE THE VACUUM MODULES BY 15 , IDEAL SOLUTION FOR SHAPED PANELS, 24 SHUTTERS FOR THE CLOSURE OF THE BASES NOT PROVIDED WITH VACUUM MODULES, 7350428 6 REAR REFERENCE STOPS WITH A STROKE OF 115 MM (BACK WORKSTATION), 7350717 6 REAR REFERENCE STOPS WITH A STROKE OF 115 MM AT 1190MM (FRONT), REFERENCE STOPS ARE 22 MM DIAMETER HARDENED STEEL TO GRANT THE MAXIMUM RIGIDITY, AND ON THE INSIDE TOP PART HAVE A TREAD TO ASSEMBLE MUSHROOM CLAMPS (OPTION) OR THE DEVICE TO REFERENCE PANELS WITH OVERHANGING LAMINATION (OPTION). REFERENCE PINS CAN ALSO BE SUPPLIED WITH SENSORS DETECTING THE STOP POSITION (OPTION)., 7350190 4 SIDE STOPS WITH A STROKE OF 115 MM (2 LH + 2 RH), THE STOPS CAN BE POSITIONED MANUALLY ALONG THE Y AXIS., 7350205-7350237 4 BAR SUPPORTS FOR MODULES H = 74 MM., THESE SUPPORTS, WITH AUTOMATIC N.C. CUTTING OUT, FACILITATE THE LOADING AND UNLOADING OF HEAVY AND/OR BIG PANELS., EACH SUPPORT CAN CARRY A WEIGHT OF 36 KG (AT 7 BAR)., PNEUMATIC SYSTEM REQUIRED, 7350806 DIVISION OF THE VACUUM SYSTEM IN 2 WORK AREAS IN X, DIVISION OF THE PNEUMATIC LOCKING SYSTEM IN 2 WORK AREAS IN X, THE MACHINE TOTAL WORK AREA IN X IS DIVIDED IN 2 INDEPENDENT WORK AREAS., THE ACTIVATION OF ONE OR BOTH AREAS IS CONTROLLED BY THE N.C., IN RELATION TO THE MAXIMUM X DIMENSION OF THE ACTIVE PROGRAM., EACH WORK AREA CAN HAVE LH AND RH ORIGINS WHEN REMOVABLE CENTRAL STOPS ARE PRESENT., THIS DIVISION ALLOWS TO HAVE, ON EACH SLIDING BASE, BOTH THE VACUUM SYSTEM, TO BE USED WITH THE VACUUM MODULES, AND THE COMPRESSED AIR SYSTEM, TO BE USED WITH PNEUMATIC LOCKING MODULES SUCH AS UNICLAMP MODULES OR PUSHERS., * THE CODE INCLUDES NR. 2 PEDALS, EACH ACTIVATING ONE WORKING AREA., 7350055 AUXILIARY VACUUM SYSTEM FOR CUSTOM FIXTURES, AUXILIARY VACUUM SYSTEM FOR THE USE OF CUSTOM FIXTURES THROUGH A SPECIFIC MACHINE CYCLE., THE SYSTEM INCLUDES 8 QUICK CONNECTS VACUUM PORTS ON THE MACHINE BASE (4 ON THE LH AREA AND 4 ON THE RH AREA)., 7300971-7300918 (2) 300 M3/H VACUUM PUMP, ROTARY VANES, OIL-FREE 300 M3/H AT 60 HZ (176.5 CFM), WORK UNITS, A= 3280MM (129); B=1525MM (60); F (FULL PENDULUM) = 875MM (34.44), 7212116 13.2 KW (17.7 HP) ELECTROSPINDLE WITH HSK F63 ADAPTOR AND AIR COOLING, THE INNOVATIVE 13.2 KW (17.7 HP) ELECTRO SPINDLE, HSK-F63 ADAPTOR, AIR COOLED ON THE ROVER MACHINES IS MANUFACTURED BY HSD (HIGH SPEED DEVELOPMENT), A BIESSE GROUP COMPANY., BENEFITS FOR THE CUSTOMER OF THE HSD TECHNOLOGY:, INCREASED PRODUCTIVITY WITH:, - PROGRAMMABLE ROTATION SPEEDS FROM 1,000 TO 24,000 RPM, - 13.2 KW (17.7 HP)/12,000 TO 15,000 RPM IN S6 DUTY,

LNS HYDROBAR MODEL 6.65HS-5.2 BARFEED, S/N 32753, SPECIFICATIONS, BAR STOCK DIA. CAPACITY, MIN. 3/4", BAR STOCK DIA. CAPACITY, MAX. 2.5", 6 TUBES, BAR LENGTH CAPACITY, MAX. 12', HYDRAULIC UNIT CAPACITY 45 GALLONS, OVERALL DIMENSIONS, LENGTH 18.4", EQUIPPED WITH, HYDRAULIC SYSTEM, STANDS, BAR FEED LENGTH - 12'

TELEDYNE LANDIS MODEL 32TFRG THREAD ROLL FINISHING MACHINE, S/N 32TFRG-49, SPECIFICATIONS, CATALOGUE SPECIFICATIONS:, ROLLING FORCE CAPACITY, MAXIMUM 42000 LBS, CAPACITY HELICAL GEARS WITH AUTOMATIC MULTIPLE REVOLVING TURRET FIXTURE, DIAMETER 2.5" (64MM), CAPACITY HELICAL GEARS WITH AUTOMATIC SINGLE-STATION ROLL OVER FIXTURE, DIAMETER 5" (127MM), CAPACITY HELICAL GEARS WITH SEMI-AUTOMATIC SINGLE-STATION FIXTURE WITH MANUAL LOAD, DIAMETER 5" (127MM), PRODUCTION RATE VARIABLE 6 TO 15 PPM, EQUIPPED WITH, FIXTURING, HYDRAULICS

2014 DMG MORI SEIKI NTX2000/1500SZM CNC MILL TURN MACHINING CENTER S/N NTX20140201, NEW 2014, SPECIFICATIONS, TECHNICAL DESCRIPTION, THE SPECIFICATIONS BELOW APPLY TO A BASIC MACHINE WITHOUT ADDITIONAL OPTIONS. SPECIFICATIONS IN SQUARE BRACKETS [ ] ARE VALUES OR FEATURES FOR A MACHINE WITH ADDITIONAL OPTIONS., CAPACITY, MAXIMUM WORKPIECE SWING DIAMETER MM (IN.) 660 (25.9), SWING OVER CROSS SLIDE:, - STANDARD MM (IN.) 660 (25.9), - TURRET 2 MM (IN.) 300 (11.8), MAXIMUM TURNING DIAMETER:, - STANDARD MM (IN.) 610 (24.0), - B-AXIS 90 MM (IN.) 660 (25.9), - TURRET 2 MM (IN.) 274 (10.7), MAXIMUM TURNING LENGTH MM (IN.) 1,540 (60.6), BAR WORK CAPACITY:, - STANDARD MM (IN.) 65 (2.5), - FOR 80 MM (?3.1 IN.) BAR WORK CAPACITY SPECIFICATIONS MM (IN.) [80 (3.1)], TRAVEL, X-AXIS MM (IN.) 495 <470+25>, (19.5 <18.5+1.0>), Y-AXIS MM (IN.) 125 (4.9), Z-AXIS MM (IN.) 1,560 (61.4) +215 (8.5), B-AXIS 120, X2-AXIS MM (IN.) 160 (6.3), Z2-AXIS MM (IN.) 1,402 (55.2), SPINDLE 1, MAXIMUM SPINDLE SPEED:, - STANDARD MIN-1 5,000, - FOR 80 MM (3.1 IN.) BAR WORK CAPACITY SPECIFICATIONS MIN-1 [4,000], NUMBER OF SPINDLE SPEED RANGES 1, TYPE OF SPINDLE NOSE:, - STANDARD A2-6, - FOR 80 MM (3.1 IN.) BAR WORK CAPACITY SPECIFICATIONS [A2-8], THROUGH-SPINDLE HOLE DIAMETER:, - STANDARD MM (IN.) 73 (2.9), - FOR 80 MM (3.1 IN.) BAR WORK CAPACITY SPECIFICATIONS MM (IN.) [91 (3.6)], MINIMUM SPINDLE INDEXING INCREMENT 0.0001, SPINDLE BEARING INNER DIAMETER:, - STANDARD MM (IN.) 120 (4.7), - FOR 80 MM (?3.1 IN.) BAR WORK CAPACITY SPECIFICATIONS MM (IN.) [140 (?5.5)], SPINDLE TORQUE <15%ED/30 MIN/CONT.>:, - STANDARD NM (FTLBF) 230/178/159, (169.6/131.3/117.3), - HIGH-TORQUE NM (FTLBF) [358/231/214, (264.0/170.4/157.8)], SPINDLE 2, MAXIMUM SPINDLE SPEED MIN-1 5,000, NUMBER OF SPINDLE SPEED RANGES 1, TYPE OF SPINDLE NOSE A2-6, THROUGH-SPINDLE HOLE DIAMETER MM (IN.) 73 (2.9), MINIMUM SPINDLE INDEXING INCREMENT 0.0001, SPINDLE BEARING INNER DIAMETER MM (IN.) ?120 (?4.7), SPINDLE TORQUE <15%ED/30 MIN/CONT> NM (FTLBF) 230/178/159, (169.6/131.3/117.3), TOOL SPINDLE, NUMBER OF TOOL STATIONS 1, MINIMUM B-AXIS INDEXING INCREMENT 0.0001, MAXIMUM TOOL SPINDLE SPEED MIN-1 12,000, TAPER HOLE OF ROTARY TOOL SPINDLE CAPTO C6 [BT40], [CAT40] [HSK-A63], [KM-63], TYPE OF RETENTION KNOB DMG MORI SEIKI 90, INNER DIAMETER OF ROTARY TOOL SPINDLE BEARING MM (IN.) 70 (2.7), TOOL STORAGE CAPACITY 38 [76], MAXIMUM TOOL DIAMETER MM (IN.) 70 (2.7), MAXIMUM TOOL DIAMETER MM (IN.) 125 (4.9), MAXIMUM TOOL LENGTH MM (IN.) 300 (11.8), MAXIMUM TOOL MASS KG (LB.) 8 (17.6) [10 (22)], TOOL CHANGING TIME SEC 1.25, SPINDLE TORQUE <10%ED/CONT.> NM (FTLBF) 120/44 (88.5/32.5), TURRET 2, NUMBER OF TOOL STATIONS 10, TURRET INDEXING TIME <1-STATION> SEC 0.19, SHANK HEIGHT FOR SQUARE TOOL MM (IN.) 20 (0.8), DIAMETER OF BORING BAR SHANK PART MM (IN.) MAX. 32 (1.2), LIVE TOOLING ON TURRET,

2003 HAAS VF-2D 5-AXIS CNC MACHINING CENTER, S/N 30977, X-AXIS TRAVEL 30", Y-AXIS TRAVEL 16", Z-AXIS TRAVEL 20", TABLE 36"X14", MAX. SPINDLE RATING 20 HP, MAX. SPINDLE SPEED 7,500 RPM, DRIVE SYSTEM INLINE DIRECT-DRIVE, TAPER CT40, FEEDRATES: X, Y, Z RAPIDS 1000 IN/MIN, MAX. CUTTING 833 IN/MIN, TOOL CHANGER TYPE SMTC, CAPACITY 24 + 1, MACHINE WEIGHT 8,000 LBS., EQUIPPED WITH HAAS CNC CONTROLS, SIDE MOUNT 24 POSITION, RIGID TAPPING, AUTOMATIC TOOL CHANGER, 7,500 RPM INLINE DIRECT DRIVE SPINDLE, 4TH AXIS DRIVE, 5TH AXIS DRIVE, 4TH AND 5TH AXIS ROTARY TABLES, CHIP AUGER, COOLANT SYSTEM, SPLASH GUARDS, INTERNAL MULTI TAP TRANSFORMER, ROTATION & SCALING, FLOPPY DISC DRIVE, MACROS, SPINDLE ORIENTATION, REMOTE JOG HANDLE, PROGRAMABLE COOLANT NOZZLE

2011 OKAMOTO IGM-2MB PRECISION INTERNAL GRINDING MACHINE S/N: 17026 - OKAMOTO PRECISION INTERNAL GRINDING MACHINE, MODEL IGM-2MB WITH MDI CONTROL, AUTOMATIC CYCLE, AUTOMATIC DRESSING WITH DRESS COMPENSATION AND WHEEL WEAR COMPENSATION, S/N 17026, NEW 2011, SPECIFICATIONS, INTERNAL DIAMETER TO BE GROUND IS 8.0, STANDARD ACCESSORIES, TEACH-INPUT POSITIONING SYSTEM MANUAL PULSE GENERATOR, OKAMOTO USER FRIENDLY MDI CONTROL SERVO DRIVEN WORK HEAD, SERVO DRIVEN WHEEL HEAD AIR ACTUATOR FOR POWER CHUCK, MINIMUM INCREMENT 0.00001 (DIA) STD. SPINDLE OIL MIST LUBRICATION SYSTEM, HIGH SPEED TABLE RECIPROCATION DRESSING DEVICE W/DIAMOND, TABLE STROKE FINE ADJUST (INCREMENT: 0.020) THROUGH SPINDLE COOLANT, COOLANT NOZZLE AT THE WHEEL HEAD LEVELING BOLTS WITH PLATES, TABLE POSITION INDICATOR, COLOR LCD MONITOR CONTINUOUS AND INTERMITTENT FEED, TABLE ENCLOSURE WITH DOOR INTERLOCK NECESSARY TOOLS WITH TOOLBOX, CHUCK GUARD INSTRUCTION MANUAL & INSPECTION REPORT, MACHINE FEATURES, TABLE POSITIONING SYSTEM ... SAVES SET-UP TIME AND BOOSTS PRODUCTIVITY. OPERATOR SIMPLY MOVES THE TABLE MANUALLY TO THE SIX POSITIONS SHOWN BELOW, PRESSES A POSITION IN PUT KEY AT EACH POSITION AND THE LSI CONTROL REMEMBERS THESE LOCATIONS., USER FRIENDLY MDI CONTROL ... THE MDI CONTROLLER IS MADE BY OKAMOTO AND USES A UNIQUE MICRO PROCESSOR CONTROL SYSTEM THAT PROMOTES FAST EASY SET-UP. ROUGH, MEDIUM GRIND, DRESS AND FINE GRIND IN ONE SET-UP., UP TO TEN AUTOMATIC DRESS CYCLES ... PER PART WITH AUTOMATIC DRESS COMPENSATION AND WHEEL WEAR COMPENSATION., THE WHEEL HEAD FEATURES RIGID UNIT TYPE SPINDLES ... AC STEPPING MOTOR COUPLED TO A BALL SCREW FOR DRESSING, 0.00001 (DIA.) MINIMUM INCREMENT, AND LINEAR MOTION GUIDEWAYS FOR SMOOTH OPERATION AND ACCURACY., WORK HEAD IS OF CAST IRON CONSTRUCTION ... AND FEATURES AN AC SERVO MOTOR COUPLED TO A BALL SCREW WITH, TABLE IS OF CAST IRON CONSTRUCTION AND ADOPTED LINEAR SLIDE WAY SYSTEM ... IS DRIVEN BY BALL SCREW ACHIEVED FOR TABLE SPEED FROM 20 TO 600 IPM AND VERY PRECISE TABLE POSITIONS, ESPECIALLY EFFECT FOR BLIND HOLE WORKPIECE., MDI CONTROLS ... FACILITATE SET-UP AND EDITING FUNCTIONS, HIGH SPEED TABLE SHORTENS POSITIONING CYCLE TIME AND HIGH SPEED TABLE RECIPROCATION REDUCES GRINDING CYCLE TIME. THE OKAMOTO IGM-2M INTERNAL GRINDER IS IDEAL FOR LOW TO HIGH PRODUCTION OF ONE (1) DIAMETER GRIND APPLICATIONS., 36-CYCLE MEMORY ... 36 GRINDING CYCLES CAN BE STORE TOGETHER WITH GRINDING CONDITION WHICH SELECTED MANUAL SWITCH FOR THAT PROCESS., COLOR LCD MONITOR ... USER FRIENDLY DATA INPUT SCREEN AT MAIN OPERATION MONITOR, NUMEROUS FUNCTION ... SET TWO DIFFERENT TABLE SPEED FOR COARSE GRINDING & FINE GRINDING, INTERMITTENT INFEED CAN BE SELECTABLE FOR RIGHT END, LEFT END OR BOTH ENDS., SAFETY & MIST CONTROL ... TABLE FULL ENCLOSURE WITH DOOR INTERLOCK SYSTEM., , MACHINE SPECIFICATIONS IGM-2MB, CAPACITY:, INTERNAL GRINDING RANGE 0.24 - 8.0 INCH DIAMETER, GRINDING STROKE 0.00 - 8.0 INCH, SWING INSIDE THE CHUCK COVER 14.0 INCH, SWING OVER THE TABLE 24.0 INCH, TABLE:, MAXIMUM TRAVEL 20.0 INCH, TABLE SPEED 20 - 800 IPM, HIGH SPEED SHORT STROKE 500 RECIPROCATIONS/MIN. (0.08 STROKE), WORK HEAD:, SPINDLE SPEED 50 - 1200 RPM, SWIVEL ANGLE -5 - +15, MAXIMUM CROSSFEED TRAVEL 9.4 INCH, MINIMUM INCREMENTAL INFEED 0.00001 INCH (0.00003 INCH/OPTION), AUTOMATIC FEED RATE, ROUGH & MEDIUM (INTERMITTENT) 0 - .0040 INCH (12 SELECTIONS), ROUGH & MEDIUM (CONTINUOUS) 0 - 0.1600 INCH/MIN. (12 SELECTIONS), FINE (INTERMITTENT) 0 - 0.0040 INCH (12 SELECTIONS), FINE (CONTINUOUS) 0 - 0.0800 INCH/MIN. (12 SELECTIONS), MANUAL FEED PER GRADUATION (X1)0.00001, (X10) 0.0001 INCH, MANUAL FEED PER REVOLUTION (X1)0.001, (X10) 0.01 INCH, MOTORS:, WORK HEAD 2.0 HP, GRINDING WHEEL SPINDLE 5.0 HP, CROSSFEED SERVO 0.26 HP, TABLE LONGITUDINAL FEED 1.0 HP, POWER SUPPLY: 16 KVA, DESIRED POWER SUPPLY INCLUDING COOLANT SYSTEM, FLOOR SPACE (L X W X H): 95 X 78 X 69, NET WEIGHT: 6,160 LBS., EQUIPPED WITH, KITAGAWA JN09T 3-JAW CHUCK, 20,000 RPM GRINDING SPINDLE, DIAMOND WHEEL DRESSER, COOLANT WITH FILTRATION SYSTEM

TORNOS SAS-16-DC MULTIPLE SPINDLE AUTOMATIC BAR MACHINE, S/N T59441, SPECIFICATIONS, - MAXI BAR DIAMETER : 16 [MM], - MAXI FEED LENGTH : 75 [MM], - MAXI TURNING LENGTH : 60 [MM], - NUMBER OF SPINDLES : 6, - NUMBER OF TRANSVERSAL SLIDES : 6, - NUMBER OF SPINDLE SPEEDS : 16, - SPINDLE SPEED : 1200-8000 [RPM], - MAXI PRODUCTION : 80 [PARTS/MIN], - NUMBER OF INDEPENDENT AVAILABLE FEEDS : 4, - INDEPENDENT FEEDS NORMAL STROKE : 45 [MM], - SIZES : 5000 X 900 [MM], - WEIGHT : 3000 [KG], EQUIPPED WITH, - SUB-SPINDLE WITH BRAKE, - COUNTER OPERATION DEVICE, - TURNING TOOL-HOLDERS, - FOOT AND DRUM, - BAR FEEDER, - COOLANT TANK, * WITH PUMP, - MISC. TOOLING

2008 THERMWOOD CS-45 CNC ROUTER WITH Q-CORE UPGRADE - 5'X10' THERMWOOD CS-45 CNC ROUTER W/Q CORE UPGRADE, S/N 276, NEW 2008, SPECIFICATIONS, TABLE SIZE: 5 X 10, SPINDLE POWER: 12 HP HSD, SPINDLE SPEED: 24,000 RPM, ATC: 7 POSITION, MAXIMUM SPEED: 3,000 IPM, EQUIPPED WITH, QCORE SUPER CONTROL UPGRADE IN 2020, THERMWOOD VERSION 10.4.1 SOFTWARE, WINDOWS 10, NEW 12HP HSD SPINDLE IN 2016, TOOL LENGTH SENSOR, POP UP PINS

2007 MORI SEIKI NH4000 DCG CNC 4-AXIS HORIZONTAL MACHINING CENTER S/N NH401GC1660, X & Y AXIS TRAVEL 22", Z-AXIS TRAVEL 24.8", SPINDLE TO PALLET DISTANCE 3.1" - 25.1", PALLET SIZE 15.7" X 15.7", PALLET LOAD CAPACITY 880 LBS., PALLET INDEX 1 DEGREE, MAX. WORKPIECE SWING DIAMETER 24.8", MAX. WORKPIECE HEIGHT 35.4", TABLE INDEXING TIME 0.5 SECONDS, SPINDLE SPEED 14,000 RPM, SPINDLE MOTOR 25 HP, SPINDLE TAPER 40, TOOL CHANGER 60 STATION, MAX. TOOL DIAMETER 5.5", MAX. TOOL LENGTH 15.7", TOOL TO TOOL TIME 0.9 SECONDS, CHIP TO CHIP TIME 2.8 SEC, MACHINE DIMENSIONS 155"X98"X110", MACHINE WEIGHT (APPROX.) 22,000 LBS., EQUIPPED WITH, MORI FANUC MSX-701 III CNC CONTROL, DUAL PALLET CHANGER, 14,000 RPM SPINDLE, 60 STATION ATC, CHIP CONVEYOR, COOLANT THRU SPINDLE, HIGH PRESSURE UNIT, MACHINE HAS ONLY CUT BRASS.

2015 TSUGAMI M08SY CNC TURNING CENTER W/MAIN & SUB SPINDLE, C & Y AXIS, S/N 21158B, NEW 2015, SPECIFICATIONS, LIVE TOOL Y AXIS CNC LATHE WITH SUB SPINDLE, SIZE 8" CHUCK, SWING 11.02", MACHINING LENGTH 14.96", CHUCK SIZE 8", BAR CAPACITY 2.6", POWER 15 HP, MAX RPM 5,000 RPM LIVE TOOLS, TURNING DIA 11.02", TAILSTOCK NO, LIVE TOOLING YES, SUB SPINDLE YES, WEIGHT 12500, SPECIFICATIONS:, MAX. MACHINING DIAMETER 280 MMM, MAX. MACHINING LENGTH 380 MM (14.96"), MAX. CHUCK SIZE 8", MAX. SPINDLE SPEED 200 TO 4,500 RPM, SUB-SPINDLE SPEED 200 TO 4,500 RPM, MAIN SPINDLE JIS A2-6, MAIN SPINDLE BORE 2.87", NO. OF TURRET STATIONS 12, MAIN LIVE TOOL SPEED UP TO 5,000 RPM, MAIN MOTOR 7.5/11 KW, RAPID TRAVERSE RATE: X-AXIS 24 MM/MIN, Y-AXIS 12 MM/MIN, Z-AXIS 30 MM/MIN, EQUIPPED WITH, FANUC OI-TD CNC CONTROL, MAIN AND SUB-SPINDLE, LIVE MILLING, 3-JAW CHUCK ON MAIN, COLLET CHUCK ON SUB, SPARE 3-JAW CHUCK, CHIP CONVEYOR, COOLANT, Y-AXIS, MISC. TOOLING, C-AXIS ON MAIN & SUB SPINDLE, BAR FEEDER, EDGE, REBEL MDL. V-65 SERVO, MODEL, VS-65LE-CE, S/N S520164809