MultiLocation Food Beverage and 1 Tanker Trailer Auction Contact M Davis Group to Consign YOUR Equipment

ECONO CHESSE CORP. 16" W X 189" L S/S SANITARY INCLINE BLUE BELT CONVEYOR S/N:2 WITH 16" WIDE SANITARY SOLID BLUE BELTING, FIRST SECTION OF CONVEYOR MEASURES 90" BEFORE INCLINE SECTION, 8" SIDE RAILS RUN THE ENTIRE FIRST SECTION ON THE CONVEYOR, INCLINE TROUGHING SECTION OF CONVEYOR MEASURES 96", INFEED HEIGHT IS 19", DISCHARGE HEIGHT IS 48", HEIGHT COULD BE RAISED WITH ADJUSTABLE LEGS, OVERALL DIMENSIONS ARE 189" L X 45" W X 55" H, BALDOR 2 HP DRIVE, 3/60/30/460 V, 1755 RPM, 1.5 SECOND PER FOOT SPEED, VIDEO OF SYSTEM UNDER POWER UPON REUEST

APROX. 8" W X 16' L S/S SANITARY INTRALOX CONVEYOR WITH 90 DEGREE TURN, 1/2 HP DRIVE, 208/230/460 V, ELECTRIC EYE, INFEED AND DISCHARGE HEIGHT IS 45 INCHES. THIS IS ADJUSTABLE WITH FOOT PADS, 2 INCH SIDERAILS THE ENTIRE LENGTH OF THE CONVEYOR

APROX. 10" WIDE X 158" LONG S/S BLOWOFF BELT CONVEYOR WITH 10" WIDE BELT WITH PERFORATIONS TO ALLOW AIR TO BE BLOWN ON THE PRODUCT, 158" LONG, 30" INFEED AND DISCHARGE HEIGHT (HEIGHTS CAN BE VARIED WITH ADJUSTABLE FOOT PADS); .5 HP, 208-230/460 S/S WASH DOWN DRIVE MOTOR, 14" BACKSPLASH THAT RUNS 154", SYSTEM IS COMPLETE WITH BLOWER, NEW SPARE BELT TO BE INCLUDED AND SHOWN IN PHOTOS, THIS SYSTEM SHOULD SHIP VIA FLATBED DUE TO THE OVERALL LENGTH, MIGHT BE ABLE TO FIND SOMEONE TO TAKE THIS COMMON CARRIER, SYSTEM WAS LAST USED IN THE FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION.

2011 FABCO F4-FBC 18" X 108" S/S SANITARY CONVEYOR S/N: 310305-431 WITH 2-LUG LINK CHAIN FOR BLOCKS OR BOXES, 19" BETWEEN SIDE RAILS WITH 3" HIGH SIDE WALLS, 13" OVERALL WIDE ACROSS CHAIN AREA, 108" LONG BELTS, 31" HIGH WITH ADJUSTABLE LEGS, 1 HP, 208-230/460 - COMPLETE WITH CONTROL BOX, UNIT HAS NEW BELTING ON IT. USED BELTING WILL COME WITH THE CONVEYOR, LAST USED IN THE FOOD INDUSTRY TO CONVEY BLOCKS OF CHEESE, USED IN VERY GOOD WORKING CONDITION.

APROX. 10" WIDE X 281" LONG INCLINE S/S SANITARY INTRALO BELT CONVEYOR WITH 1/2" HIGH CLEATS, 9" APART, INFEED 9" HIGH, DISCHARGE 13.5"; 2" GUIDE RAILS RUN ENTIRE LENGTH OF CONVEYOR, PORTABLE LOCKING CASTERS, LESSON S/S WASH DOWN DRIVE MOTOR, SEE MOTOR TAG PHOTO FOR SPECS. UNIT WAS LAST USED IN THE FOOD INDUSTRY AS A PACK OFF CONVEYOR ROM A BAGGER. SYSTEM IS IN EXCELLENT WORKING CONDITION.

2007 PMR (PACKAGING MACHINERY RESOURCES) 1300 DUAL LANE CONTINUOUS CONTAINER FILLER, SEALER, LIDDER S/N: 20070207, WITH ALL SANITARY SYSTEM, 440 VOLT, ALLEN BRADLEY MICROLOGIC CONTROLLER, ALLEN BRADLEY POWERFLEX SPEED CONTROLLER, ALLEN BRADLEY PANELVIEW 300 CONTROL PAD, UNIT IS ON CASTERS, SYSTEM IS RATED AT APROX. 30 CONTAINERS PER MINUTE, CURRENT CONTAINER DIAMETER IS APROX. 6", -- THIS SYSTEM DENESTS THE CONTAINERS, FILLS THE CONTAINERS, PUTS A PROTECTIVE SEAL ON THE CONTAINER AND THEN LIDS.

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, S/N: 50072 WITH 2" TAPE HEAD, 110 VOLT

3M 700 RKS TOP AND BOTTOM CASE TAPER, TYPE 19300, WITH 3" TAPE HEADS, 115 VOLT, 5.8 AMPS S/N: 6187

S/S SANITARY RIBBON BLENDING HOPPER/TANK, APROX. 330 CU. FT. / 2500 GALLONS, ALL S/S DESIGN UNITS, MEASURE APROX. 200" L (16.5 FT.) X 72" W X 72" DEEP WITH 15 HP MAIN DRIVE MOTOR FOR RIBBON AGITATOR, 7.5 HP DRIVE MOTOR FOR SCREW AUGER, ALL MOTORS ARE 208-230/460 V. THESE WERE LAST USED TO BLEND CHEESE, (4) 18" MANWAYS WITH COVERS, SPRAYBALLS FOR CLEANING, SEVERAL SMALL INLETS RANGING FROM 4" TO 1-1/2". THESE ARE VERY HEAVY DUTY SYSTEMS. THEY WEIGH APROX. 6,000 LBS. LAST USED IN THE DAIRY INDUSTRY MIXING CHEESE AND REMAIN IN EXCELLENT CONDITION. IF YOU ARE LOOKING FOR A CONTINUOUS THROUGH BLEND THEN LOOK NO FURTHER WITH THE RIBBON PART OF THE AGITATION AND THE LIVE BOTTOM SCREW THE PRODUCT IS CONTINUOUSLY BEING PULLED FROM FRONT TO BACK AND FOLDED WITH THE LIVE BOTTOM SCREWS. THESE SYSTEMS ARE VERY EXPENSIVE NEW AND THIS IS AN OPPORTUNITY TO SAVE LITERALLY THOUSAND OF DOLLARS. VERY POPULAR IN THE CHEESE INDUSTRY AND CHEESE TENDS TO SET UP QUICKLY AND TEHSE UNITS KEEP THAT FROM HAPPENING.

S/S SANITARY RIBBON BLENDING HOPPER/TANK, APROX. 330 CU. FT. / 2500 GALLONS, ALL S/S DESIGN UNITS, MEASURE APROX. 200" L (16.5 FT.) X 72" W X 72" DEEP WITH 15 HP MAIN DRIVE MOTOR FOR RIBBON AGITATOR, 7.5 HP DRIVE MOTOR FOR SCREW AUGERS, 10 HP DRIVE MOTOR FOR WAUKESHA 224 POSITIVE DISPLACEMENT PUMP (NOTE - THERE IS ONLY 1 PUMP), ALL MOTORS ARE 208-230/460 V. (4) 18" MANWAYS WITH COVERS, SPRAYBALLS FOR CLEANING, SEVERAL SMALL INLETS RANGING FROM 4" TO 1-1/2". THESE ARE VERY HEAVY DUTY SYSTEMS. THEY WEIGH APROX. 6,000 LBS. LAST USED IN THE DAIRY INDUSTRY MIXING CHEESE AND REMAIN IN EXCELLENT CONDITION. IF YOU ARE LOOKING FOR A CONTINUOUS THROUGH BLEND THEN LOOK NO FURTHER WITH THE RIBBON PART OF THE AGITATION AND THE LIVE BOTTOM SCREW THE PRODUCT IS CONTINUOUSLY BEING PULLED FROM FRONT TO BACK AND FOLDED WITH THE LIVE BOTTOM SCREWS.

INTERPACK TOP AND BOTTOM CASE SEALER TAPER, MODEL 4-B, S/N: TM09511 E 001 WITH AUTOFLAP. IPG'S UA SERIES UNIFORM AUTOMATIC CASE SEALERS ARE OPERATOR FREE MACHINES THAT FOLD THE TOP FOUR FLAPS AND PROCESS SAME SIZED RSC STYLE CASES. SIDE BELT DRIVE IS PREFERRED FOR VOID FILLS, OVERFILLS AND LIGHT WEIGHT CASES; OFFSET TAPE HEADS WILL PROCESS AS LOW AS 3-1/2" TALL, COMPACT 65" LONG FRAME; STANDARD INTERLOCKING SAFETY GATES; SELECTABLE FLOATING UPPER HEAD TO PROCESS MILD OVERFILLS; STANDARD INDEXTING GATE; SELF TENSIONING / SELF TRACKING BELT DRIVE. INTERPACK CAN CUSTOMIZE TO SPECIFIC REQIREMENTS SUCH AS LINE VOLTAGE, OPERATION RANGE OR 4-FLAP PICKUP ASSEMBLIES.

BRADMAN LAKE DUAL MANDREL TRAY FORMER, MODEL XS2-60, S/N: 16891 WITH ALLEN BRADLEY MICROLOGIX CONTROLLER, 480 V, PORTABLE ON CASTERS, UNIT LAST USED IN THE FOOD INDUSTRY, SYSTEM REMAINS IN EXCELLENT CONDITION

CTM 3600-PA PRINTER APPLICATOR WITH PORTABLE STAND AND PARTS UNIT S/N: 3600-0726-0504. THE 3600-PA DUAL ACTION TAMP (DAT) PRINTER APPLICATOR IS A HIGH SPEED, THERMAL TRANSFER LABELER USED TO PRINT AND APPLY PRESSURE SENSITIVE LABELS THAT CAN BE PROGRAMMED FOR SINGLE OR TWO PANEL LABELING APPLICATIONS APPLIED TO VARIOUS CARTONS, CASES OR PALLETS. THE SINGLE PANEL CAN BE APPLIED TO EITHER THE FRONT OR THE SIDE. SATO OR ZEBRA PRINT ENGINE INTEGRATED INTO THE APPLICATOR TO PRINT VARIABLE DATA. CAN BE MOUNTED IN ALMOST ANY POSITION TO APPLY LABELS TO THE LEADING, SIDE OR TRAILING PANELS OF VARIOUS PRODUCTS. MOUNTING CAN BE ORIENTED UP OR DOWN DEPENDING UPON LABEL SIZE AND POSITION ON THE PRODUCT. SHORT HEIGHT ACTUATOR ASSEMBLY ALLOWS THE UNIT TO REACH OVER A CONVEYOR TO PRODUCTS WHICH ARE NOT AT THE EDGE OF THE CONVEYOR - 4" TALL LABELS CAN BE LOCATED 1/4" FROM THE BOTTOM OF PRODUCTS. RIGHT HAND OR LEFT HAND VERSION FOR EITHER SIDE OF CONVEYOR UP TO 7.1" WIDE LABELS, UP TO 6.6" PRINT WIDTH BUILT-IN BAR CODES AND ALPHA-NUMERIC FONTS PROVEN TAMP-BLOW APPLICATION PLC CONTROL USER-FRIENDLY OPERATOR INTERFACE WITH EASY-TO-READ LCD DISPLAY. QUICK ACCESS TO SET-UP PARAMETERS - RUGGED AND VERSATILE FOR STANDARD AND CUSTOM APPLICATIONS, EQUIPPED WITH MULTIPLE ONBOARD I/O SIGNALS PREWIRED TO EXTERNAL CONNECTORS. DIMENSIONS DEPENDENT UPON LINE CONFIGURATION WEIGHT APPROX. 150 LBS., ELECTRICAL 108-132 VOLTS AC, 5 AMPS,54/60 HERTZ, SINGLE PHASE, PNEUMATIC 90 PSI., 3-5 CFM, COMMUNICATIONS RS 232, PARALLEL -ENVIRONMENTAL OPERATING 41O F TO 104O F (5O C TO 40O C), STORAGE -4O F TO 104O F (-20O C TO 40O C), PRINTING METHOD THERMAL TRANSFER, DIRECT THERMAL PRINT RESOLUTION 203 OR 305 DPI, DEPENDENT UPON PRINT ENGINE, PRODUCT SENSING PHOTOELECTRIC, PLC INPUT, APPLICATOR CONTROL MICRO PLC WITH OPERATOR KEY-PAD AND 2-LINE DISPLAY FOR PRINT SPEED, FONTS, BAR CODES OR GRAPHICS, SEE PROGRAMMING MANUAL OF PRINTER MANUFACTURER. THE 3600A-PA PRINTER APPLICATOR IS A HIGH-SPEED LABELER USED TO THERMALLY PRINT AND APPLY PRESSURE SENSITIVE LABELS TO MOVING PRODUCTS. A THERMAL TRANSFER PRINTER IS INTEGRATED INTO AN APPLICATOR TO FORM A SELFCONTAINED UNIT THAT WILL PRINT VARIABLE DATA ONTO A LABEL. THE PRINTER/APPLICATOR CAN BE MOUNTED IN ALMOST ANY POSITION ADJACENT TO PRODUCT FLOW TO APPLY LABELS TO TOP, SIDES OR BOTTOM OF PRODUCTS AS THEY PASS BY.

2000 OK INTERNATIONAL SUPERFORMER 1 CASE ERECTOR/TAPER S/N: 00-21098. OEM 2" TAPE HEAD, 480 V, 3 PHASE, 60 HZ, OEM CASE SIZE RANGE - MINIMUMS ARE APROX. 8" L X 8" W X 6" D AND MAXIMUMS ARE APROX. 24" L X 20" W X 24" D; OEM RATED AT UP TO 15 CASES PER MINUTE, S/S FRAME INCLUDING HOUSING, POWERED BELT HOPPER, OVERALL DIMENSIONS APROX. 127" L X 66" W X 78" H. THIS SYSTEM WAS LAST USED IN A CHEESE PLANT AND REMAINS IN EXCELLENT CONDITION.

1998 DIXIE EVOLUTION THERMOFORMER, MODEL EVOLUTION, S/N: EVO.0211 -- SYSTEM LAST USED IN THE DAIRY INDUSTRY DOING CHEESE -- UNIT IS IN EXCELLENT CONDITION AND COMES WITH NUMEROUS SPARE PARTS.

THERMO GORING KERR TEK DSP3/3-PSU S/S SANITARY METAL DETECTOR. UNIT WAS LAST USED IN THE FOOD INDUSTRY. SPECS INCLUDE APPERATURE OPENING 7-1/2" W X 7" H, ALL S/S HEAD AND FRAME, FRAME EXTENSION IS CARBON STEEL, 120/230 VAC, 50/60 HZ, 6" W WHITE INTRALOX BELTING, 6-1/2" HIGH PRODUCT CLEARANCE, AIR BLAST REJECT, OVERALL DIMENSIONS WITH THE HOPPER EXTENSION ARE 34" WIDE X 64" LONG X 82" HIGH, DIMENSIONS WITH THE HOPPER EXTENSION REMOVED ARE 32" WIDE X 61" LONG X 45" HIGH. THIS UNIT HAS A 12-DOLLAR BATTERY THAT NEEDS TO BE REPLACED TO CLEAR THE FAULT CODE.

GROTE S/A SANITARY SLICER/APPLICATOR. WE HAVE MANY DIFFERENT SIZES OF TOOLING FOR THIS SLICER; PRODUCT SIZE UP TO 6" (152.4 MM) DIA., SLICING ZONE - 22", 30" OR 48" WIDE; SLICE THICKNESS UP TO .5" (12.7 MM) STANDARD, UP TO 1.5" (38.1 MM) OPTIONAL; SLICING ZONE WIDTHS 22" (558.8 MM), 30" (762 MM), OR 40" (1016 MM); ELECTRICAL 200 - 575 VAC, 50/60 HZ, 3 PHASE; WATER 40-100 PSI (REQUIRED WITH SOME PRODUCTS) -- THE SLICER/APPLICATOR SLICES AND APPLIES A WIDE RANGE OF PRODUCTS DIRECTLY ONTO YOUR PROCESSING LINES IN MULTIPLE LANES WITH RPECISE TARGETING; CUSTOMIZE TO YOUR OPERATION WITH HEAD AND LANE CONFIGURATION, SLICING ZONE SIZE, LEFT OR RIGHT HAND ORIENTATION AND CANTILEVERED DESIGN. CONTINUOUS PRODUCT LOADING WITH GRAVITY FEED AND OPTIONAL LOW-LEVEL SENSOR REDUCES DOWNTIME AND MAINTAINES SLICE QUALITY. ITS NEW SANITARY DESIGN FEATURES AN OPEN CHANNEL FRAME AND EASY ACCESS FOR FAST AND THOROUGH CLEANING. SLICE AND APPLY OR BULK SLICE UP TO 150 STROKES PER MINUTE, PER LANE; STACK AND SHINGLE UP TO 120 STROKES PER MINUTE, PER LANE; CUSTOM HEIGHT, FRAME ORIENTATION, HEAD AND LANE CONFIGURATIONS; CONTINUOUS PRODUCT LOADING REDUCES DOWNTIME; SANITARY DESIGN WITH NEW OPEN CHANNEL FRAME, WATERSHED ENCLOSURE AND EASILY REMOVABLE PARTS; LAST USED IN THE FOOD INDUSTRY SLICING CHEESE, USED IN EXCELLENT CONDITION.

GIZZARD S/S WASHER / CLEANER, MODEL MC2 - POULTRY PROCESSING EQUIPMENT. GIZZARD WASHER/CLEANER IS DESIGNED FOR REMOVING GASTRIC CONTENTS AND FAT FROM THE SURFACE OF OPENED GIZZARDS. THE GIZZARD WASHER AND CLEANER IS MANUFACTURED IN STAINLESS AND ACID RESISTANT STEEL. GIZZARDS ARE MANUALLY PLACED INTO THE MACHINE. THEY PASS THROUGH THE MACHINE, THEY ARE CLEANED OF FAT AND GASTRIC CONTENTS AND WASHED WITH WATER. AFTER THESE OPERATIONS THE GIZZARDS EXIT AUTOMATICALLY

GIZZARD S/S WASHER / CLEANER, MODEL MC2 - POULTRY PROCESSING EQUIPMENT. GIZZARD WASHER/CLEANER IS DESIGNED FOR REMOVING GASTRIC CONTENTS AND FAT FROM THE SURFACE OF OPENED GIZZARDS. THE GIZZARD WASHER AND CLEANER IS MANUFACTURED IN STAINLESS AND ACID RESISTANT STEEL. GIZZARDS ARE MANUALLY PLACED INTO THE MACHINE. THEY PASS THROUGH THE MACHINE, THEY ARE CLEANED OF FAT AND GASTRIC CONTENTS AND WASHED WITH WATER. AFTER THESE OPERATIONS THE GIZZARDS EXIT AUTOMATICALLY

SPROUT WALDRON PS34 SANITARY PEDESTAL SIFTER, SINGLE DECK WITH 2-SEPARATIONS, SYSTEM WILL COME WITH 3 SCREENS, 1 HP DRIVE MOTOR, 3/60/230-460 V. THIS WAS LAST USED IN THE DAIRY INDUSTRY UNDER A SPRAY DRYER, SYSTEM WAS JUST RUN THROUGH SHOP AND REMAINS IN EXCELLENT WORKING CONDITION.

PALLET TURNTABLE WRAPPER - AS NEW - NEVER INSTALLED

TURBO TOOLS DOUGH CUTTING TABLE WITH TOOLS - IN COMPLETE WORKING ORDER

MCCARTER CORP. RG DUAL COMPARTMENT CHOCOLATE MIXING TANK S/N: 51-305-629 WITH 15 HP MOTOR AND DRIVE, 230/460 V, 1750 RPM, 3 PHASE, MOUNTED ON MILK STEEL LEGS

BLOMMER SINGLE COMPARTMENT HORIZONTAL JACKETED CHOCOLATE TANK WITH 5 HP MOTOR DRIVE, 230/460 V, 1175 RPM, MOUNTED ON MILD STEEL LEGS

2011 GOODWAY CONTINUOUS MIXER INCLUDES 150 LITRE BATTER HOLDING TANK, S/S HOLDING TANK S/N: QC002-2011. BATTER HOLDING TANK, S/S HOLDING TANK IS JACKETED FOR TEMPERATURE CONTROL.

(20) PLASTIC PALLETS - APROX. 40" X 48"

PLASTIC PALLETS - APROX. 40" X 48"

GARVER ELECTRIFUGE S/N: 12602

100 GALLON S/S TANK 30" DIA X 53" TALL

4 INCH FLOW DIVERT VALVE

STAINLESS STEEL DRAIN TABLE 24 X 48 INCH

LITTLE DAVID CF-5 SEMI-AUTOMATIC CASE ERECTOR, VOLT 110 WITH CASTERS S/N: 1511892CF5/E

24" WIDE X 24' LONG SKATE WHEEL FLEX CONVEYOR

ROSEDALE DNCO8-30-2F-1-150--CBPODPG FILTER SYSTEM, 150 PSI

24" WIDE X 40' LONG SKATE WHEEL FLEX CONVEYOR

30" WIDE X 24' LONG SKATE WHEEL FLEX CONVEYOR

AMERICAN CHILLERS DAVM2003 SPLIT, INDOOR PUMP/EVAPORATOR CABINET S/N: 2104027, VOLT 207-230/3/60

FLOW SCIENCES HOOD. AS SHOWN IN PHOTOS.

SERGEANT 110CT SGT COMBO-II SYS CAP SHRINK WRAPPING SYSTEM S/N: 68637, VOLT 120 WITH CASTERS

TITAN H-100 AUTOBAGGER

PERL 6OST-6-T 6-HEAD FILLER S/N: 209

FORKLIFT FORK SPREADER ATTACHMENT

2007 LANTECH S300XT OVERHEAD PALLET WRAPPER, VOLT 120, SINGLE PHASE, S/N: SM002844 (NOTE: WRAPPER IS ALREADY TAKEN DOWN AND PALLETIZED)

ORION 33/O PALLET WRAPPER PRE STRETCH, 120 VOLT S/N: 0572012TL5D

SOUTH PALLETPAL C2 5-28 ROLL-ON LEVEL LOADER, PLATFORM SIZE 44 X 48

SOUTH PALLETPAL C2 5-28 ROLL-ON LEVEL LOADER, PLATFORM SIZE 44 X 48

SOUTH PALLETPAL C2 5-28 ROLL-ON LEVEL LOADER, PLATFORM SIZE 44 X 48

SOUTH PALLETPAL C2 5-28 ROLL-ON LEVEL LOADER, PLATFORM SIZE 44 X 48