MultiLocation Plastic Equipment Consignment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
82
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2004 | CUMBERLAND | 20X72-5KN |
2004 CUMBERLAND 20X72-5KN GRANULATOR S/N: 66300-91002. 20" X 72" FEED THROAT, 5 KNIFE STEEP ANGLE STEP ADJUSTABLE KNIFE ROTOR (10 SEGMENTS), 2 BED KNIFE, 2 AUXILIARY BED KNIVES, 1 TEAR BED KNIFE. DESIGNED FOR FILM GRANULATION AND FILM BLOW IN IN-FEED, DIRECTLY DRIVEN BY DUAL 200 HP 1190 RPM 460 VOLT ONLY MOTORS, 18" AIRVEYOR DISCHARGE. APPROXIMATELY 3/8" HOLES CLOSE FITTING SCREENS, DOES NOT INCLUDE STARTER/CONTROLS OR BLOW IN IN-FEED HOPPER. REBUILT IN 2004.
|
🔒 Subscribe |
|
|
WELEX | 4-1/2'' 30:1 NON VENTED EXTRUDER |
4-1/2'' 30:1 NON VENTED EXTRUDER, WATER COOLED WITH CONTROL PANEL, 250 HP D.C. BALDOR MOTOR, LUFKIN GEARBOX APPROXIMATE 8.5 TO 1. AND 54'' CENTERLINE. (1) 15 HP DYNISCO MELT PUMP. (1) 4.5 '' BERINGER SCREEN CHANGER WITH POWER PAK. (1) DAVIS STANDARD 2.5'' 30:1 WATER COOLED EXTRUDER MFG. IN 1998 WITH BERINGER HYDRAULIC SCREEN CHANGER AND POWER PACK, 60 HP DRIVE AND CONTROLS. (1) COEX FEED BLOCK WITH FLEX LIP DIE. (1) APPROXIMATE 42'' WELEX 3 ROLL SHEET STACK WITH PULL ROLLS AND TEMPERATURE CONTROLS, (3) 18" DIAMETER ROLLS. (2) CART STYLE TORQUE MOTOR REWINDERS WITH DRIVE PEDESTAL.
|
🔒 Subscribe | |
|
|
DUSENBERY | 815 LR |
DUSENBERY 815 LR 60" SLITTER. DUPLEX DESIGN WITH 3" REWIND SHAFTS. 2 MOTOR DESIGN WITH (1) 15 HP GE DC MOTOR AND (1) 7.5 HP GE DC MOTOR. RAZOR IN GROOVE SLITTING WITH SIX RAZOR KNIFE HOLDERS AND SIX FEMALE GROOVED SECTIONS. DUPLEX REWIND WITH 3" CORE SHAFTS AND SET OF LAY ON ROLL ARMS FOR EACH SHAFT WITH ONE LAY ON ROLL EACH. 65" WIDE X 40" TO 60" DIAMETER UNWIND STAND WITH 3" SHAFT. FIFE GUIDE DESIGN WITH DISC BRAKE CLUTCH. INCLUDES DRIVE CABINET WITH DRIVES AND CONTROL PANEL. S/N: 54750
|
🔒 Subscribe | |
|
|
BUSS | TCS 100-16 D |
BUSS TCS 100-16 D KO-KNEADER EXTRUDER. 100MM (3.93") DIAMETER HEATED SCREW, 16 TO 1 L/D RATIO. APPROXIMATE 57-1/4" CENTERLINE HEIGHT. (6) JACKETED BARREL SECTIONS, SIDE FEEDER, ALSO HAS TOP CENTER PORT. SCREW DRIVEN BY A 125 HP, 3/60/460 VOLT, 1785 RPM AC MOTOR. HAS (4) REGLOPLAS P160 TEMPERATURE CONTROLLERS. S/N: 452126-1. INCLUDES COOLING CONVEYOR, BELT APPROXIMATE 39-3/8" WIDE X 18 LONG, (2) CORED ROLLS 8" DIAMETER & 16" DIAMETER, NETZSCH-CONDUX SMALL GRANULATOR AT THE END OF THE COOLING CONVEYOR. HAS VAC-U-MAX BULK COLLECTION SYSTEM WITH ROOTS MODEL 33 U-RAI ROTARY LOBE BLOWER, (4) STERLING MODEL M2B2010-D TEMPERATURE CONTROLLERS, STERLING MODEL GRT45-5-4 PUMP TANK. OPERATORS PANEL WITH SIEMENS/MOORE PLC, (6) DOOR CONTROL PANEL WITH ABB ACS 600 MAIN DRIVE, ABB ACS 300 FEEDER DRIVE, SQUARE D TELEMECANIQUE ALTIVAR 18 DRIVE GRANULATOR DRIVE.
|
🔒 Subscribe | |
|
|
1988 | OMV | 4.5" SINGLE SCREW EXTRUDER |
1988 OMV 4.5" SINGLE SCREW EXTRUDER. APPROXIMATELY 36 TO 1 L/D. ELECTRICALLY HEATED, WATER COOLED 8 ZONE BARREL. WATER COOLED FEED THROAT WITH 6-1/4" X 6-1/4" TANGENTIAL FEED OPENINGS. APPROXIMATE 54" CENTERLINE HEIGHT. BARREL APPROXIMATELY 172" LONG. MANUAL SCREEN CHANGER. DRIVEN BY A 219KW DC MOTOR. INCLUDES CINCINNATI MILACRON CONTROL PANEL WITH GE FANUC SERIES ONE PLC, PARKER DRIVE, (2) BALDOR VECTOR DRIVES, MISSING TEMPERATURE CONTROLLERS. MOUNTED ON A PAINTED CARBON STEEL FRAME. MACHINE# 00455. S/N: 00455
|
🔒 Subscribe |
|
|
DRAISWERKE INC | G-100S |
DRAISWERKE INC G-100S THERMOKINETIC MIXING/COMPOUNDING MACHINE. 316 STAINLESS STEEL. NOMINAL VOLUME 100 LITER, BATCH SIZE 70 POUNDS. JACKETED CLAMSHELL DESIGN CHAMBER, CORED MIXING PADDLE. TOP FEED, BOTTOM DISCHARGE WITH DOOR. INCLUDES 1000 HP, 4160 VOLT, 1195 RPM, XP MOTOR, CONTROL PANEL WITH SAFETRONICS. BASE MOUNTED.
|
🔒 Subscribe | |
|
|
2009 | BRY-AIR | VFB-6-S-545-DXP |
2009 BRY-AIR VFB-6-S-545-DXP INDUSTRIAL DEHUMIDIFIER, PROCESS 555 CFM, REACTIVE 180 CFM. PROCESS MOTOR 2 HP, REACTIVE MOTOR 1-1/2 HP. PROCESS MAX OUT TEMPERATURE 190 DEGREES F. S/N: 2010S8916. INCLUDES GOODMAN 4 TON CONDENSER, MODEL GSX130481BA, 13 SEER RATING, R-410A REFRIGERANT, BUILT 2009. CONTROL PANEL WITH A/B MICROLOGIX 1400 PLC, A/B PANELVIEW 300 MICRO. MOUNTED ON A PAINTED CARBON STEEL FRAME. 3/60/460 VOLT.
|
🔒 Subscribe |
|
|
EDI | 60" WIDE SHEET DIE |
EDI 60" WIDE SHEET DIE. BACK CENTER FEED WITH ADAPTER. ENTRANCE STYLE: ROUND - PILOT DIA. - 1.509". THROAT DIA. - 0.750". LIP GAP: 0.000" - 0.040". S/N: 12-31509-1
|
🔒 Subscribe | |
|
|
THYSSEN HENSCHEL | FM 40 |
THYSSEN HENSCHEL FM 40 HIGH INTENSITY MIXER. 304 STAINLESS STEEL. 32 LITER (1.1 CUBIC FEET) WORKING CAPACITY, 40 LITER (1.4 CUBIC FEET) TOTAL CAPACITY. CARBON STEEL JACKETED BOWL APPROXIMATE 15-1/8" DIAMETER X 14" DEEP, RATED 5 BAR (72.5 PSI) AT 200 DEGREES C., (392 F.). HINGED TOP COVER WITH BAFFLE, (3) TIER BLADE. SIDE BOTTOM OUTLET WITH PLUG VALVE. DRIVEN BY A 10HP, 3/60/460 VOLT, 1755 RPM MOTOR, MANUAL SIDE SPEED ADJUSTMENT. UNIT INCLUDES AN OPERATORS CONTROL PANEL. S/N: 845228
|
🔒 Subscribe | |
|
|
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. (5) ZONES EACH APPROXIMATE 33" LONG; 4-1/2" DIAMETER MAXIMUM MATERIAL O.D. INCLUDES TOP HINGED COVERS AND A CONTROL PANEL. MOUNTED ON A FRAME WITH LEGS.
|
🔒 Subscribe | |||
|
|
STERLCO | F6026-BX |
STERLCO F6026-BX HOT OIL TEMPERATURE CONTROLLER. 3/60/460 VOLT, 62 AMP, 24 KW. MOUNTED ON CASTERS. S/N: 41360
|
🔒 Subscribe | |
|
|
C.W. BRABENDER | EPL-V301 |
C.W. BRABENDER EPL-V301 PLASTI-CORDER TORQUE RHEOMETER MIXING SYSTEM. CONSISTING OF: (1) PLASTI-CODER DIRECT DRIVE UNIT MODEL EPL-V301 ELECTRONIC TORQUE RHEOMETER, 3HP MOTOR, STEPLESS VARIABLE SPEED UP TO 120 RPM, CONSTANT TORQUE OUTPUT 26,000 METERGRAMS. (1) DELUXE MODEL 2003 EXTRUDER, 3/4" DIAMETER SCREW, 20:1 L/D, 416 STAINLESS STEEL BARREL, 2-ZONE 1000 WATT/ZONE, HEATER-COOLER COLLARS (AIR COOLING), WITH 2" WIDE SHEET DIE. (1) 4-ZONE TEMPERATURE CONTROL CONSOLE, MODEL 2504, CONTROLS UP TO 400 DEGREES C, 1/60/230 VOLT, ADVANCED DESIGN DIGITAL SET-POINT CONTROLLER & DEVIATION INDICATOR ASSEMBLY, TRUE-PROPORTING THYRISTOR UNIT. (1) OMEGA CHART RECORDER. (1) SIGMA BLADE MIXING HEAD ATTACHMENT. (1) MEASURING HEAD ATTACHMENT, TYPE R.E.O. 6/230V 8.5 AMP.
|
🔒 Subscribe | |
|
|
PTI |
PTI CIRCULAR FOAM SHEET DIE. INCLUDES A COOLING MANDREL, AND A DT INDUSTIRES/SENCORP FOAM DISTRIBUTION SYSTEM, MODEL DSM 564, SERIAL# 12159615069, 115 VOLT, 6 AMPS. LAST USED WITH A 4-1/2" PTI EXTRUDER, 48 TO 1 L/D RATIO.
|
🔒 Subscribe | ||
|
|
2012 | DOTECO | GRADO, TYPE J60 |
2012 DOTECO GRADO, TYPE J60 6-COMPONENT GRAVIMETRIC BLENDER. THROUGHPUT RATED AT 227 KG/HR, BASED ON POLYMER PELLET FEED. INCLUDES MATERIAL RECEIVER. S/N: 11027803. NO OPERATOR CONTROLS INCLUDED.
|
🔒 Subscribe |
|
|
2012 | DOTECO | GRADO, TYPE J60 |
2012 DOTECO GRADO, TYPE J60 6-COMPONENT GRAVIMETRIC BLENDER. THROUGHOUT RATED AT 137 KG/HR, BASED ON POLYMER PELLET FEED. INCLUDES MATERIAL RECEIVER. S/N: 11027804. NO OPERATORS CONTROLS INCLUDED.
|
🔒 Subscribe |
|
|
MAILLEFER | RC81 |
MAILLEFER RC81 BELT PULLER (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE MAXIMUM MANUAL OPENING 6". DRIVEN BY A 2.5KW MOTOR WITH REDUCER. INCLUDES AN OPERATOR PANEL. S/N: 89-5836/7. 240 VOLT PLUG.
|
🔒 Subscribe | |
|
|
MAILLEFER | RC81 |
MAILLEFER RC81 BELT PULLER. (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE MAXIMUM MANUAL OPENING 6". DRIVEN BY A 2.5KW MOTOR WITH REDUCER. INCLUDES AN OPERATOR PANEL AND CONTROL PANEL. MOUNTED ON AN I-BEAM FRAME. S/N: 88-5808/5. 240 VOLT PLUG.
|
🔒 Subscribe | |
|
|
2010 | DOTECO | GRADO, TYPE J60 |
2010 DOTECO GRADO, TYPE J60 6 COMPONENT GRAVIMETRIC BLENDING SYSTEM. RATED AT 82 KG/HR (188 POUNDS/HOUR). INCLUDES (6) RECEIVERS. NO OPERATOR CONTROLS INCLUDED. S/N: 24SN4902. PREVIOUSLY INSTALLED ON 2.5" EXTRUDER.
|
🔒 Subscribe |
|
|
BETA LASERMIKE | ACCUSCAN AS 5040 R |
ACCUSCAN AS 5040 R, O.D. RANGE 0.2-40 MM, GATE SIZE 52MM, SCAN RATE 2400 SCANS/SEC/AXIS, SERIAL#07-15-7498, (1) ULTRASCAN 1000, MODEL US1063-8T-10M, O.D. RANGE 3.75-63MM, GAUGE THROAT 83MM, SERIAL# 22-15-1003, (1) LASERSPEED, MODEL 4000-303L, SPEED RANGE 0.4-4,000 METERS PER MINUTE, STANDOFF DISTANCE 300MM, DEPTH OF FIELD 35MM. SERIAL# 52-11-5018. WITH ULTRASCAN DSP, SERIAL# 22-15-1002 AND DATAPRO 5000 CONTROLLER WITH TOUCH SCREEN PANEL AND STAND.
|
🔒 Subscribe | |
|
|
MAILLEFER | RC81 |
MAILLEFER RC81 BELT PULLER (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE MAXIMUM MANUAL OPENING 6". DRIVEN BY AN APPROXIMATE 2.5KW MOTOR. INCLUDES AN OPERATOR PANEL AND CONTROL PANEL. MOUNTED ON AN I-BEAM FRAME. NO MANUFACTURERS TAG. 240 VOLT PLUG.
|
🔒 Subscribe | |
|
|
FLEX LIP SHEET DIE. 29" WIDE, BACK CENTER FEED, DUAL R BARS, REMOVABLE LOWER LIP, WITH MANUAL DECKLLING. S/N: 89263/700/L5-CR
|
🔒 Subscribe | |||
|
|
HERBOLD | PU500 |
HERBOLD PU500 PULVERIZER. CARBON STEEL. DRIVEN BY A 75 HP, 3/50/415 VOLT MOTOR. CAPACITY: 150-1000 KG/HOUR.
|
🔒 Subscribe | |
|
|
BASKET TYPE PIPE DIE, 9.5" DIAMETER. PREVIOUSLY USE ON STYRENE FOAM.
|
🔒 Subscribe | |||
|
|
ABB | ACS500-U1 |
ABB ACS500-U1 CONTROL DRIVE. 1-200 HP, UL TYPE1/NEMA1/1P21. NO MOTOR INCLUDED.
|
🔒 Subscribe | |
|
|
2000 | LAUDA | TR400HKK |
2000 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 392 F.). 3/50/400 VOLT. MOUNTED ON CASTERS.
|
🔒 Subscribe |
|
|
CUMBERLAND | QUIETIZER PELLETIZER, MODEL 6 |
CUMBERLAND QUIETIZER PELLETIZER, MODEL 6. APPROXIMATE 6-5/8" LONG X 8" DIAMETER. 16 BLADE, 8 INSTALLED. DRIVEN BY A 10 HP, 3/60/230/460 VOLT, 1745 RPM VARIABLE SPEED GEAR MOTOR. APPROXIMATE 3" DIAMETER RUBBER ROLL. MOUNTED ON PAINTED CARBON STEEL FRAME. S/N: 326050-B-85005
|
🔒 Subscribe | |
|
|
2000 | LAUDA | TR400HKK |
2000 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 392 F.). 3/50/400 VOLT. MOUNTED ON CASTERS.
|
🔒 Subscribe |
|
|
2002 | LAUDA | TR400HKK |
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 392 F.). 3/50/400 VOLT. MOUNTED ON CASTERS.
|
🔒 Subscribe |
|
|
CUMBERLAND | 6 |
CUMBERLAND 6 PELLETIZER. APPROXIMATE 6-5/8" LONG X 8" DIAMETER ROTOR. 8 BLADE, 4 INSTALLED. DRIVEN BY A 5 HP, 3/60/230/460 VOLT, 1745 RPM VARIABLE SPEED GEAR MOTOR. APPROXIMATE 3" DIAMETER RUBBER ROLL. MOUNTED ON PAINTED CARBON STEEL FRAME. S/N: 26820-691
|
🔒 Subscribe | |
|
|
2002 | LAUDA | TR400HKK |
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 392 F.). 3/50/400 VOLT. MOUNTED ON CASTERS.
|
🔒 Subscribe |
|
|
NOKIA-MAILLEFER |
NOKIA-MAILLEFER APPROXIMATE 3.14" HYDRAULIC SCREEN CHANGER. INCLUDES A POWER PACK; CONTROL PANEL WITH AN ALLEN-BRADLEY MICROLOGIX 1000 CONTROLLER. MOUNTED ON A CART WITH A 5HP DC MOTOR FOR A GEAR PUMP (NOT INCLUDED).
|
🔒 Subscribe | ||
|
|
2001 | MAAG | 110-4 STX |
2001 MAAG 110-4 STX GEAR PUMP BODY
|
🔒 Subscribe |
|
|
2001 | ENTREX | 70-4 ST |
2001 ENTREX 70-4 ST GEAR PUMP
|
🔒 Subscribe |
|
|
2002 | LAUDA | TR400HKK |
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 392 F.). 3/50/400 VOLT. MOUNTED ON CASTERS.
|
🔒 Subscribe |
|
|
NOVATECH | MCS-206 |
NOVATECH MCS-206 3 COMPONENT BLENDING SYSTEM CONSISTING OF: (1) NOVATEC PNEUMATIC PUMP, MODEL UPU, DRIVEN BY A 3 HP MOTOR WITH FILTER, AND MULTI-STATION PANEL, SERIAL # 12-343-0842. INCLUDES RECEIVERS, AND CONTROLS, SERIAL # 12-243-0177. LAST USED WITH A 2.5" EXTRUSION LINE.
|
🔒 Subscribe | |
|
|
AEC NELMOR | AK68 |
AEC NELMOR AK68 AUGER FED GRANULATOR. CARBON STEEL. APPROXIMATE 7-1/2" WIDE X 6" DIAMETER (3) BOLT ON BLADE OPEN ROTOR. APPROXIMATE 6" DIAMETER X 32" LONG SCREW FEED WITH ENCLOSED TUBE. INCLUDES A FEED HOPPER, BOTTOM CATCH BOX, SET UP FOR BLOWER DISCHARGE WITH A 1HP BLOWER, APPROXIMATE 5/16" DIAMETER SCREEN, AND CONTROLS. SCREW DRIVEN BY A 1HP GEAR MOTOR, BLADES DRIVEN BY A 5HP, 3/60/230/460 VOLT, 1755 RPM MOTOR. MOUNTED ON A CAST CARBON STEEL BASE WITH CASTERS. S/N: 00E03908
|
🔒 Subscribe | |
|
|
WATER COOLING TANK; STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 240" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
KUM SOO | KUS-V |
KUM SOO KUS-V WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MANUAL TANK ADJUSTMENT. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |
|
|
KUM SOO | KUS-V |
KUM SOO KUS-V WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MANUAL TANK ADJUSTMENT. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED ON A CARBON STEEL FRAME WITH TRACK WHEELS.
|
🔒 Subscribe | |||
|
|
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O.D. INCLUDES A BOTTOM MOUNTED BLOWER; TOP HINGED COVER; AVATAR INSTRUMENTS POWER CONTROLLER AND AN OPERATOR PANEL. MOUNTED ON 4 LEGS.
|
🔒 Subscribe | |||
|
|
2000 | PLAST-CONTROL | GDC+3100AS+3DOS |
2000 PLAST-CONTROL GDC+3100AS+3DOS GRAVIMETRIC DOSING MEASUREMENT & CONTROL SYSTEM CONSISTING OF: (3) DOSING FEEDERS WITH HOPPERS AND (1) OPERATOR PANEL. S/N: 314010600
|
🔒 Subscribe |
|
|
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O.D. INCLUDES A BOTTOM MOUNTED BLOWER; TOP HINGED COVER; AVATAR INSTRUMENTS POWER CONTROLLER AND AN OPERATOR PANEL. MOUNTED ON 4 LEGS.
|
🔒 Subscribe | |||
|
|
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O.D. INCLUDES A BOTTOM MOUNTED BLOWER; TOP HINGED COVER; AVATAR INSTRUMENTS POWER CONTROLLER AND AN OPERATOR PANEL. MOUNTED ON 4 LEGS.
|
🔒 Subscribe |
2004 CUMBERLAND 20X72-5KN
2004 CUMBERLAND 20X72-5KN GRANULATOR S/N: 66300-91002. 20" X 72" FEED THROAT, 5 KNIFE STEEP ANGLE ST...
WELEX 4-1/2'' 30:1 NON VENTED EXTRUDER
4-1/2'' 30:1 NON VENTED EXTRUDER, WATER COOLED WITH CONTROL PANEL, 250 HP D.C. BALDOR MOTOR, LUFKIN ...
DUSENBERY 815 LR
DUSENBERY 815 LR 60" SLITTER. DUPLEX DESIGN WITH 3" REWIND SHAFTS. 2 MOTOR DESIGN WITH (1) 15 HP GE ...
BUSS TCS 100-16 D
BUSS TCS 100-16 D KO-KNEADER EXTRUDER. 100MM (3.93") DIAMETER HEATED SCREW, 16 TO 1 L/D RATIO. APPRO...
1988 OMV 4.5" SINGLE SCREW EXTRUDER
1988 OMV 4.5" SINGLE SCREW EXTRUDER. APPROXIMATELY 36 TO 1 L/D. ELECTRICALLY HEATED, WATER COOLED 8 ...
DRAISWERKE INC G-100S
DRAISWERKE INC G-100S THERMOKINETIC MIXING/COMPOUNDING MACHINE. 316 STAINLESS STEEL. NOMINAL VOLUME ...
2009 BRY-AIR VFB-6-S-545-DXP
2009 BRY-AIR VFB-6-S-545-DXP INDUSTRIAL DEHUMIDIFIER, PROCESS 555 CFM, REACTIVE 180 CFM. PROCESS MOT...
EDI 60" WIDE SHEET DIE
EDI 60" WIDE SHEET DIE. BACK CENTER FEED WITH ADAPTER. ENTRANCE STYLE: ROUND - PILOT DIA. - 1.509". ...
THYSSEN HENSCHEL FM 40
THYSSEN HENSCHEL FM 40 HIGH INTENSITY MIXER. 304 STAINLESS STEEL. 32 LITER (1.1 CUBIC FEET) WORKING ...
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. (5) ZONES EACH APPROXIMATE 33" LONG; 4-1/2" DIAMETER MA
STERLCO F6026-BX
STERLCO F6026-BX HOT OIL TEMPERATURE CONTROLLER. 3/60/460 VOLT, 62 AMP, 24 KW. MOUNTED ON CASTERS. S...
C.W. BRABENDER EPL-V301
C.W. BRABENDER EPL-V301 PLASTI-CORDER TORQUE RHEOMETER MIXING SYSTEM. CONSISTING OF: (1) PLASTI-CODE...
PTI
PTI CIRCULAR FOAM SHEET DIE. INCLUDES A COOLING MANDREL, AND A DT INDUSTIRES/SENCORP FOAM DISTRIBUTI...
2012 DOTECO GRADO, TYPE J60
2012 DOTECO GRADO, TYPE J60 6-COMPONENT GRAVIMETRIC BLENDER. THROUGHPUT RATED AT 227 KG/HR, BASED ON...
2012 DOTECO GRADO, TYPE J60
2012 DOTECO GRADO, TYPE J60 6-COMPONENT GRAVIMETRIC BLENDER. THROUGHOUT RATED AT 137 KG/HR, BASED ON...
MAILLEFER RC81
MAILLEFER RC81 BELT PULLER (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE MA...
MAILLEFER RC81
MAILLEFER RC81 BELT PULLER. (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE M...
2010 DOTECO GRADO, TYPE J60
2010 DOTECO GRADO, TYPE J60 6 COMPONENT GRAVIMETRIC BLENDING SYSTEM. RATED AT 82 KG/HR (188 POUNDS/H...
BETA LASERMIKE ACCUSCAN AS 5040 R
ACCUSCAN AS 5040 R, O.D. RANGE 0.2-40 MM, GATE SIZE 52MM, SCAN RATE 2400 SCANS/SEC/AXIS, SERIAL#07-1...
MAILLEFER RC81
MAILLEFER RC81 BELT PULLER (2) 2-1/2" WIDE X APPROXIMATE 36" LONG CONTACT AREA BELTS. APPROXIMATE MA...
FLEX LIP SHEET DIE. 29" WIDE, BACK CENTER FEED, DUAL R BARS, REMOVABLE LOWER LIP, WITH MANUAL DECKLL
HERBOLD PU500
HERBOLD PU500 PULVERIZER. CARBON STEEL. DRIVEN BY A 75 HP, 3/50/415 VOLT MOTOR. CAPACITY: 150-1000 K...
BASKET TYPE PIPE DIE, 9.5" DIAMETER. PREVIOUSLY USE ON STYRENE FOAM.
ABB ACS500-U1
ABB ACS500-U1 CONTROL DRIVE. 1-200 HP, UL TYPE1/NEMA1/1P21. NO MOTOR INCLUDED....
2000 LAUDA TR400HKK
2000 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 39...
CUMBERLAND QUIETIZER PELLETIZER, MODEL 6
CUMBERLAND QUIETIZER PELLETIZER, MODEL 6. APPROXIMATE 6-5/8" LONG X 8" DIAMETER. 16 BLADE, 8 INSTALL...
2000 LAUDA TR400HKK
2000 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 39...
2002 LAUDA TR400HKK
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 39...
CUMBERLAND 6
CUMBERLAND 6 PELLETIZER. APPROXIMATE 6-5/8" LONG X 8" DIAMETER ROTOR. 8 BLADE, 4 INSTALLED. DRIVEN B...
2002 LAUDA TR400HKK
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 39...
NOKIA-MAILLEFER
NOKIA-MAILLEFER APPROXIMATE 3.14" HYDRAULIC SCREEN CHANGER. INCLUDES A POWER PACK; CONTROL PANEL WIT...
2001 MAAG 110-4 STX
2001 MAAG 110-4 STX GEAR PUMP BODY...
2001 ENTREX 70-4 ST
2001 ENTREX 70-4 ST GEAR PUMP...
2002 LAUDA TR400HKK
2002 LAUDA TR400HKK SECONDARY CIRCLE UNIT HEATER. TEMPERATURE RANGE -60 TO 200 DEGREES C. (-76 TO 39...
NOVATECH MCS-206
NOVATECH MCS-206 3 COMPONENT BLENDING SYSTEM CONSISTING OF: (1) NOVATEC PNEUMATIC PUMP, MODEL UPU, D...
AEC NELMOR AK68
AEC NELMOR AK68 AUGER FED GRANULATOR. CARBON STEEL. APPROXIMATE 7-1/2" WIDE X 6" DIAMETER (3) BOLT O...
WATER COOLING TANK; STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED ON A
WATER COOLING TANK; STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 240" LONG. MOUNTED ON A
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED O
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" LONG. MOUNTED O
KUM SOO KUS-V
KUM SOO KUS-V WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" L...
KUM SOO KUS-V
KUM SOO KUS-V WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 10" WIDE X 10" DEEP X 300" L...
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED O
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED O
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED O
WATER COOLING TANK; 304 STAINLESS STEEL. TANK APPROXIMATE 12" WIDE X 12" DEEP X 120" LONG. MOUNTED O
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O
2000 PLAST-CONTROL GDC+3100AS+3DOS
2000 PLAST-CONTROL GDC+3100AS+3DOS GRAVIMETRIC DOSING MEASUREMENT & CONTROL SYSTEM CONSISTING OF: (3...
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O
INFRARED SYSTEMS TUBING HEATER PROFILE OVEN. APPROXIMATE 6' LONG; 3-1/2" DIAMETER MAXIMUM MATERIAL O