Fresh Vegetable Process Packaging Urschel Slicers Safeline Lyco Ishida AllFill Ulma Combi Shanklin Peelers Labeling Conveyor More
Category: FOOD PROCESSING AND RESTAURANT EQUIPMENT
Total Lots:
362
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
BOCK | FP95 |
BOCK FP95 CENTRIFUGE (NO BASKET)
|
🔒 Subscribe | |
|
|
115 VOLT BELT CONVEYOR 12" X 80" LONG X 39" HIGH, STAINLESS STEEL CONSTRUCTION, STAINLESS STEEL ELECTRIC MOTOR, INTRALOX TYPE BELTING, BELT WAS USED FOR AQUA PACK CELERY AND CARROT STIX, WOULD FILL THE CUPS W/ UV TREATED WATER AS THEY WERE CONVEYED DOWN THE BELT, THE CUPS WOULD TRIGGER AN EYE THAT TURNED THE WATER ON AND OFF, HAS AQUAFINE ULTRAVIOLET DISINFECTION UNIT WHERE THE WATER RUNS THROUGH PRIOR TO DISPENSING INTO THE CUP.
|
🔒 Subscribe | |||
|
|
WASH TUNNEL CONVEYOR (APPROX. 2' X 7')
|
🔒 Subscribe | |||
|
|
WASH TUNNEL CONVEYOR (APPROX. 14" X 14')
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 19" X 20')
|
🔒 Subscribe | |||
|
|
TIERED SHAKER CONVEYOR (APPROX. 22" X 8'6")
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR WITH DIVIDER (APPROX. 30" X 8' WITH (2) 1' LANES)
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL PLATFORMS WITH STAIRS (APPROX. 4'X8' LOWER LEVEL 27" FROM FLOOR, 4' X 4' TOP LEVEL 43" FROM FLOOR)
|
🔒 Subscribe | |||
|
|
KEY | BIAS FEED SHAKER |
KEY BIAS FEED SHAKER 24"W X 11'L X 6' BIAS
|
🔒 Subscribe | |
|
|
STAINLESS STEEL FLATWIRE BELTING, APPROX 17' 9" ROLL OF 42" WIDE 1" X 1"
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL FLATWIRE BELTING, APPROX 25' 5" ROLL OF 42" WIDE 1" X 1"
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL FLATWIRE BELTING, APPROX 23' 5" ROLL OF 48" WIDE 1" X 1"
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL FLATWIRE BELTING, APPROX 17' 5" ROLL OF 36" WIDE 1" X 1"
|
🔒 Subscribe | |||
|
|
HEINZEN INTERNATIONAL |
HEINZEN INTERNATIONAL FLUME SECTIONS, FEED SECTION, FLUME FEED IS 65" LONG W/WELDED SEAM ON END.
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
|
🔒 Subscribe | |||
|
|
KOCH | FP 700 SPEEDY |
KOCH FP 700 SPEEDY INLINE SEMI AUTOMATIC TRAY SEALERS. APPEARS LIKE LAST SEAL | APPEARS LIKE LAST SEALING A 8" X 10 TRAYS, UPTO 20 CYCLES PER/MINUTE.
|
🔒 Subscribe | |
|
|
STAIRCASE (APPROX. 14' LONG)
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 8" BELT AND 11' LENGTH)
|
🔒 Subscribe | |||
|
|
ELECTRIC 6 ROLL ABRASIVE PEELER, UNIT IS CONSTRUCTED OF A STAINLESS STEEL FRAME, LEGS ARE STEEL, HAS 6 ROLLS, SPEED CONTROLLER AND SPRAY BAR, STEEL SUPPORT LEGS, NEEDS REBUILD.
|
🔒 Subscribe | |||
|
|
WASH TABLE (APPROX. 22" X 92")
|
🔒 Subscribe | |||
|
|
ENERSYS | EQ3 - 10-1 |
ENERSYS MULTIVOLT CHARGER - MODEL EQ3 - 10-1, S/N: JK94604
|
🔒 Subscribe | |
|
|
ADVANCED DETECTION SYSTEMS | SERIES 1700 |
ADVANCED DETECTION SYSTEMS SERIES 1700 METAL DETECTOR, SIZE 20" WIDE X 6" HIGH, STAINLESS STEEL ENCLOSED, 120 VOLT 1 PHASE, ESTIMATED SENSITIVITY FOR WET PRODUCTS 2.5-3 MM FERROUS AND NON-FERROUS, 3.5-4 MM STAINLESS STEEL
|
🔒 Subscribe | |
|
|
ENERSYS | EQ3 - 10-1 |
ENERSYS MULTIVOLT CHARGER - MODEL EQ3 - 10-1, S/N: JK94626
|
🔒 Subscribe | |
|
|
ALL-FILL | PW-12 |
ALL-FILL PW-12 CHECK WEIGHER S/N: 980300
|
🔒 Subscribe | |
|
|
ALL-FILL | PW-12 |
ALL-FILL PW-12 CHECK WEIGHER S/N: 980137
|
🔒 Subscribe | |
|
|
ULMA | SUPER SHIK WRAPPER |
ULMA SUPER SHIK WRAPPER S/N: 2101874
|
🔒 Subscribe | |
|
|
INCLINE CONVEYOR (APPROX. 8" X 9')
|
🔒 Subscribe | |||
|
|
ULMA | SUPER SHIK WRAPPER |
ULMA SUPER SHIK WRAPPER S/N: 2101807
|
🔒 Subscribe | |
|
|
SAFELINE |
SAFELINE METAL DETECTOR / X-RAY (NOT IN USE)
|
🔒 Subscribe | ||
|
|
LOT OF BIN OF DIMPLED CHUTES AND PARTS | REQUIRED RIGGING AND LOADING FEE FOR SIMPLE LOADING: OWNER TO PROVIDE SIMPLE LOADING AT NO CHARGE
|
🔒 Subscribe | |||
|
|
PADDLE CONVEYOR WITH CHUTE (APPROX. 16" X 11')
|
🔒 Subscribe | |||
|
|
ROLLER WASHER (APPROX. 24" X 8')
|
🔒 Subscribe | |||
|
|
CROSS OVER PLATFORM AND STAIRS ALUMINUM, APPROX 36"W X 7'L PLATFROM X 5.5' H
|
🔒 Subscribe | |||
|
|
HMI | SD-300 |
HMI SD-300 CENTRIFUGE BASKET, APPROX 31"DIA. X 37"H BOTTOM DUMP BASKET
|
🔒 Subscribe | |
|
|
HMI | SD-300H |
HMI SD-300H CENTRIFUGE DRYER, STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
PARKER |
HYDRAULIC POWER UNIT W/ TANKJ PARKER VALVE DIRECTIONAL CONTROL VALVE, LINCOLN ELECTRIC MOTOR, 3 PHASE, DRIVE TYPE 10 HP ELECTRIC
|
🔒 Subscribe | ||
|
|
WATERFALLS MFG | MODEL 26 |
WATERFALLS MFG MODEL 26 26" SHREDDER NEEDING FULL REBUILD, MISSING MANY PARTS, NO LEGS.
|
🔒 Subscribe | |
|
|
VICKERS |
VICKERS HYDRAULIC PUMP, 10 HP LINCOLN AC MOTOR, ELECTRIC MOTOR AND TANK, TANK IS 24" LONG X 18" WIDE X 14" TALL, MOTOR IS 3 PHASE 230/460, TEFC FRAME 215TC, 26/13 AMPS.
|
🔒 Subscribe | ||
|
|
ULMA | SUPER SHIK WRAPPER |
ULMA SUPER SHIK WRAPPER S/N: 1643
|
🔒 Subscribe | |
|
|
ULMA | SUPER SHIK WRAPPER |
ULMA SUPER SHIK WRAPPER S/N: 2102293
|
🔒 Subscribe | |
|
|
AJAX | 10DF |
DEWATERING SHAKER, APPROX 30" X 66" ON SS FRAME 1HP DRIVE W/ 10DF AJAX SCREEN HAS CUT IN IT, PAINTED FRAME
|
🔒 Subscribe | |
|
|
VORTEX PUMP TANK, 39" WIDE X 118" OVERALL LONG.
|
🔒 Subscribe | |||
|
|
STAINLESS STEEL DUAL BINS (EACH APPROX. 3' X 3' AND 26" DEEP)
|
🔒 Subscribe | |||
|
|
LOT OF SCAFFOLDING | REQUIRED RIGGING AND LOADING FEE FOR SIMPLE LOADING: OWNER TO PROVIDE SIMPLE LOADING AT NO CHARGE
|
🔒 Subscribe | |||
|
|
INDUSTRIAL WORKHORSE | 24R1050E3D |
INDUSTRIAL WORKHORSE 24R1050E3D 48V CHARGER S/N: 07Y48163
|
🔒 Subscribe | |
|
|
EASY RIPE | CATALYTIC GENERATOR |
CATALYTIC GENERATOR MODEL EASY RIPE GENERATOR, RIPENING GENERATOR FOR TOMATOS, CHOO | RIG SEE DESC - CATALYTIC GENERATOR MODEL EASY RIPE GENERATOR, RIPENING GENERATOR FOR TOMATOS, CHOOSE FROM 1-4 CAR SIZE ROOM SETTINGS.
|
🔒 Subscribe | |
|
|
SIZE 25" X 56" STAINLESS STEEL CLEANING REEL W/ STAINLESS STEEL ENCLOSURE, HAS CHAIN DRIVE W/ TRUNION WHEELS, NO MOTOR, THE DRUM HAS 1/4" PERFORATIONS, THERE IS A SPRAY BAR.
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 6" X 8')
|
🔒 Subscribe |
BOCK FP95
BOCK FP95 CENTRIFUGE (NO BASKET)...
115 VOLT BELT CONVEYOR 12" X 80" LONG X 39" HIGH, STAINLESS STEEL CONSTRUCTION, STAINLESS STEEL ELEC
WASH TUNNEL CONVEYOR (APPROX. 2' X 7')
WASH TUNNEL CONVEYOR (APPROX. 14" X 14')
BELT CONVEYOR (APPROX. 19" X 20')
TIERED SHAKER CONVEYOR (APPROX. 22" X 8'6")
BELT CONVEYOR WITH DIVIDER (APPROX. 30" X 8' WITH (2) 1' LANES)
STAINLESS STEEL PLATFORMS WITH STAIRS (APPROX. 4'X8' LOWER LEVEL 27" FROM FLOOR, 4' X 4' TOP LEVEL 4
KEY BIAS FEED SHAKER
KEY BIAS FEED SHAKER 24"W X 11'L X 6' BIAS...
STAINLESS STEEL FLATWIRE BELTING, APPROX 17' 9" ROLL OF 42" WIDE 1" X 1"
STAINLESS STEEL FLATWIRE BELTING, APPROX 25' 5" ROLL OF 42" WIDE 1" X 1"
STAINLESS STEEL FLATWIRE BELTING, APPROX 23' 5" ROLL OF 48" WIDE 1" X 1"
STAINLESS STEEL FLATWIRE BELTING, APPROX 17' 5" ROLL OF 36" WIDE 1" X 1"
HEINZEN INTERNATIONAL
HEINZEN INTERNATIONAL FLUME SECTIONS, FEED SECTION, FLUME FEED IS 65" LONG W/WELDED SEAM ON END....
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
STAINLESS STEEL BIN (APPROX. 3' X 4' X 30" DEEP)
KOCH FP 700 SPEEDY
KOCH FP 700 SPEEDY INLINE SEMI AUTOMATIC TRAY SEALERS. APPEARS LIKE LAST SEAL | APPEARS LIKE LAST SE...
STAIRCASE (APPROX. 14' LONG)
BELT CONVEYOR (APPROX. 8" BELT AND 11' LENGTH)
ELECTRIC 6 ROLL ABRASIVE PEELER, UNIT IS CONSTRUCTED OF A STAINLESS STEEL FRAME, LEGS ARE STEEL, HAS
WASH TABLE (APPROX. 22" X 92")
ENERSYS EQ3 - 10-1
ENERSYS MULTIVOLT CHARGER - MODEL EQ3 - 10-1, S/N: JK94604...
ADVANCED DETECTION SYSTEMS SERIES 1700
ADVANCED DETECTION SYSTEMS SERIES 1700 METAL DETECTOR, SIZE 20" WIDE X 6" HIGH, STAINLESS STEEL ENCL...
ENERSYS EQ3 - 10-1
ENERSYS MULTIVOLT CHARGER - MODEL EQ3 - 10-1, S/N: JK94626...
ALL-FILL PW-12
ALL-FILL PW-12 CHECK WEIGHER S/N: 980300...
ALL-FILL PW-12
ALL-FILL PW-12 CHECK WEIGHER S/N: 980137...
ULMA SUPER SHIK WRAPPER
ULMA SUPER SHIK WRAPPER S/N: 2101874...
INCLINE CONVEYOR (APPROX. 8" X 9')
ULMA SUPER SHIK WRAPPER
ULMA SUPER SHIK WRAPPER S/N: 2101807...
SAFELINE
SAFELINE METAL DETECTOR / X-RAY (NOT IN USE)...
LOT OF BIN OF DIMPLED CHUTES AND PARTS | REQUIRED RIGGING AND LOADING FEE FOR SIMPLE LOADING: OWNER
PADDLE CONVEYOR WITH CHUTE (APPROX. 16" X 11')
ROLLER WASHER (APPROX. 24" X 8')
CROSS OVER PLATFORM AND STAIRS ALUMINUM, APPROX 36"W X 7'L PLATFROM X 5.5' H
HMI SD-300
HMI SD-300 CENTRIFUGE BASKET, APPROX 31"DIA. X 37"H BOTTOM DUMP BASKET...
HMI SD-300H
HMI SD-300H CENTRIFUGE DRYER, STAINLESS STEEL CONSTRUCTION...
PARKER
HYDRAULIC POWER UNIT W/ TANKJ PARKER VALVE DIRECTIONAL CONTROL VALVE, LINCOLN ELECTRIC MOTOR, 3 PHAS...
WATERFALLS MFG MODEL 26
WATERFALLS MFG MODEL 26 26" SHREDDER NEEDING FULL REBUILD, MISSING MANY PARTS, NO LEGS....
VICKERS
VICKERS HYDRAULIC PUMP, 10 HP LINCOLN AC MOTOR, ELECTRIC MOTOR AND TANK, TANK IS 24" LONG X 18" WIDE...
ULMA SUPER SHIK WRAPPER
ULMA SUPER SHIK WRAPPER S/N: 1643...
ULMA SUPER SHIK WRAPPER
ULMA SUPER SHIK WRAPPER S/N: 2102293...
AJAX 10DF
DEWATERING SHAKER, APPROX 30" X 66" ON SS FRAME 1HP DRIVE W/ 10DF AJAX SCREEN HAS CUT IN IT, PAINTED...
VORTEX PUMP TANK, 39" WIDE X 118" OVERALL LONG.
STAINLESS STEEL DUAL BINS (EACH APPROX. 3' X 3' AND 26" DEEP)
LOT OF SCAFFOLDING | REQUIRED RIGGING AND LOADING FEE FOR SIMPLE LOADING: OWNER TO PROVIDE SIMPLE LO
INDUSTRIAL WORKHORSE 24R1050E3D
INDUSTRIAL WORKHORSE 24R1050E3D 48V CHARGER S/N: 07Y48163...
EASY RIPE CATALYTIC GENERATOR
CATALYTIC GENERATOR MODEL EASY RIPE GENERATOR, RIPENING GENERATOR FOR TOMATOS, CHOO | RIG SEE DESC -...
SIZE 25" X 56" STAINLESS STEEL CLEANING REEL W/ STAINLESS STEEL ENCLOSURE, HAS CHAIN DRIVE W/ TRUNIO
BELT CONVEYOR (APPROX. 6" X 8')