Fresh Vegetable Process Packaging Urschel Slicers Safeline Lyco Ishida AllFill Ulma Combi Shanklin Peelers Labeling Conveyor More
Category: FOOD PROCESSING AND RESTAURANT EQUIPMENT
Total Lots:
362
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
DAYTON | 2C890 |
DAYTON MODEL #2C890 SINGLE INLET FORWARD CURVE DIRECT DRIVE BLOWER,DRIVE TYPE 3/4 HP, 115/230 VOLT SINGLE PHASE, 10 5/8" WHEEL DIAMETER, WHEEL WIDTH 5 1/4" WHEEL BORE 5/8", 10" INLET DIAMETER, 11 3/4" HEIGHT X 8" WIDTH OUTLET, OVERALL 21" HEIGHT X 19" WIDTH X 18" DEPTH, CW ROTATION VIEWED FROM DRIVE SIDE, MAXIUMUM INLET AIR TEMP 180 DEG F, W/O MOTOR, RECCOMMENDED MOTOR POWER RATING 3/4 HP @ 1725RPM, MOUNTED ON STAINLESS STEEL FRAME, TESTED WORKING.
|
🔒 Subscribe | |
|
|
CUSTOM STAINLESS STEEL CLEANING REEL W/TANK AND PUMP, 34" LONG X 18" DIAMETER SCREEN, FLOW SERVE 3X3 PUMP, W/5 HP ELECTRIC MOTOR, REEL HAS 1 HP RELIANCE MOTOR, TANK IS 60"X 36" WIDE X 18" DEEP, STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
FMC SYNTRON | BF2-A |
FMC SYNTRON BF2-A 115 VOLT MAGNETIC FEEDER W/STAINLESS STEEL PAN 36" LONG X 8" WIDE X 4" DEEP, 4.0 AMP, VIBRATOR IS APPROX 14" LONG X 8" WIDE X 8" TALL W/SWITCH.
|
🔒 Subscribe | |
|
|
FMC SYNTRON | BF2-A |
FMC SYNTRON BF2-A 115 VOLT MAGNETIC FEEDER W/STAINLESS STEEL PAN 36" LONG X 8" WIDE X 4" DEEP, 4.0 AMP, VIBRATOR IS APPROX 14" LONG X 8" WIDE X 8" TALL W/SWITCH.
|
🔒 Subscribe | |
|
|
HYTROL | 190 LRC |
HYTROL MODEL 190 LRC POWER CURVE CONVEYOR, 24" ROLLERS, 90 DEGREES, DRIVE TYPE 1/2 HP, RELIANCE AC 230/460V, HAS BEEN SAND BLASTED AND POWDER COATED, NEVER INSTALLED. ITEM #2- HYTROL MODEL 190 ABA, SIZE 18", 18" WIDE, INCLUDES 10' LONG DRIVE SECTION, ADDITIONALLY APPROX 2 10' SECTIONS, A 5' SECTION, APPROX 35', ROLLER SLIGHTLY OVER 15" LONG, SERIAL #329003, 329010. ITEM #3-HYTROL MODEL 190 ABA, SIZE 24", 24" WIDE ROLLER CONVERYOR W/POWER DRIVE BELT, 114" SECTION LONG, 1" BETWEEN ROLLS, ROLLERS APPROX 1.9" DIAMETER, ROLLERS APPROX 20" LONG, SERIAL #329013. ITEM #4-HYTROL MODEL 190 LRC, SIZE 24", POWER CURVE, APPEARS APPROX 180 DEGREES, NO MOTOR, HAS GEARBOX, "V" BELT BELOW ROLLER TYPE, 20" WIDE, SERIAL #329012. PALLET OF SPARE PARTS.
|
🔒 Subscribe | |
|
|
1999 | MEYER | VF11-12-5X13-10 |
1999 MEYER VF11-12-5X13-10 VIBRATORY CONVEYOR W/DIMPLE STAINLESS STEEL PAN, STAINLESS STEEL CONSTRUCTION, HAS FIBER ARMS, PAN 12" WIDE X 5" DEEP X 13' LONG, ELECTRIC 3 PHASE DRIVE TYPE.
|
🔒 Subscribe |
|
|
BOSTON GEARBOX | F73260B7J |
BOSTON GEARBOX MODEL #F73260B7J, NEW, INPUT HP=1.52, RATIO 60 EX, OUTPUT TORQUE=2194 LB INCH.
|
🔒 Subscribe | |
|
|
BOSTON GEARBOX | F73260B76 |
BOSTON GEARBOX MODEL #F73260B76, NEW, INPUT HP=1.52, RATIO 60 EX, OUTPUT TORQUE=2194 LB INCH.
|
🔒 Subscribe | |
|
|
CONVEYOR FRAME 40"LONG X 32" WIDE, NO DRIVE.
|
🔒 Subscribe | |||
|
|
FMC-FOOD TECH/ALLEN | ULTRA 24/1205X117 |
FMC-FOOD TECH/ALLEN MODEL ULTRA 24/1205X117 VIBRATORY CONVEYOR W/REMOVABLE SCRRENS, DIMPLE STAINLESS STEEL PAN, 12" WIDE X 112" LONG, 44" OF REMOVABLE SCREEN, 4" PIPE TYPE DISCHARGE, DRIVE TYPE ELECTRIC 230/460 VOLT.
|
🔒 Subscribe | |
|
|
3M | A20 |
3M MODEL A20 2" WIDE CASE TAPING MACHINE S/N: 50625 TOP AND BOTTOM, HAS 2 BOTTOM CASE MOVEMENT BELTS, THERE IS AN "E" STOP, 3 WHEELS AND ONE LEG NO WHEEL.
|
🔒 Subscribe | |
|
|
3M | 110A |
3M MODEL 110A LOWER BELTS, TOP AND BOTTOM DESIGN, HAS DISCHARGE ROLLER S/N: 503 | 3M MODEL 110A SERIAL# 503_ LOWER BELTS, TOP AND BOTTOM DESIGN, HAS DISCHARGE ROLLERS.
|
🔒 Subscribe | |
|
|
FEI INC. |
FEI INC. 2 SECTIONS OF CONVEYOR, 10' LONG X 18" WIDE AND 5' LONG X 18" LONG.
|
🔒 Subscribe | ||
|
|
MATRIX | 67512 |
MATRIX 67512 BAG SQUEEZER-FOR A MATRIX BAGGER, LIKELY FOR 5# BAGS OF FRESH CUT VEGETABLES.
|
🔒 Subscribe | |
|
|
MATRIX | 13000 FBW |
MATRIX 13000 FBW MATRIX FORMING TUBE, PART #68838 S/N: 83481DSL
|
🔒 Subscribe | |
|
|
CMS GILBRETH |
CMS GILBRETH BAND SEALER HEAT TUNNEL, 5" X 40" OPENING, ELECTRIC HEATED, DESIGNED TO SET OVER A CONVEYOR, HAS FAN, MOUNTED ON LEGS, HAS CONTROL PANEL.
|
🔒 Subscribe | ||
|
|
WATERFALLS | 26" |
WATERFALLS 26" SHREDDER, STAINLESS STEEL CONSTRUCTION, CURRENTLY NO CUTTING WHEEL.
|
🔒 Subscribe | |
|
|
LAFFERTY |
LAFFERTY SANITZER, PORTABLE SANITZER, STAINLESS STEEL PORTABLE 2 WHEELED CART.
|
🔒 Subscribe | ||
|
|
RELIANCE |
STAINLESS STEEL CONVEYOR BELT W/ BACK SPLASH, BLACK RUBBER TYPE BELTING, 18" WIDE X 13' LONG X APPROX 32" HIGH, EQUIPT W/STEEL HEAD AND TAIL ROLLS, DRIVE TYPE 1 HP RELIANCE 230/460 VOLT.
|
🔒 Subscribe | ||
|
|
URSCHEL | OV |
URSCHEL MODEL OV CUTTING WHEELS WITH 17 BLADES. NO NUTS.
|
🔒 Subscribe | |
|
|
TS DESIGNS | MODEL JR. DRYER CENTRIFUGE |
TS DESIGNS MODEL JR. DRYER CENTRIFUGE, 20 GALLON BASKET DRYER, DESIGNED FOR USE WITH A 20 GALLON BRUTE PLASTIC BASKET WITH PERFORATIONS, CONSTRUCTED OF STAINLESS STEEL.
|
🔒 Subscribe | |
|
|
DBW | DBWGI-350 |
DBW DBWGI-350 WEIGH BELT CONVEYER, DESIGNED TO ASSIST MEETERING DRY PRODUCTS OR MATERIALS, STAINLESS STEEL CONVEYOR W/TOP ENCLOSED, HAS REMOVABLE SIDES, STAINLESS STEEL HEAVY DUTY FRAME, 60" LONG X 12" WIDE W/ 22" WIDE DISCHARGE.
|
🔒 Subscribe | |
|
|
DOUGH CHUNKER, CONSTRUCTED FROM UHMW TYPE MATERIALS, 15 1/2" OPEN FEED TO ROTATING DRUM WITH SLOTS 1" X 1/2" DEEP X 16" LONG, FEED HEIGHT APPROX 28", EQUIPED WITH 3/4HP RELIANCE 208-230/460 VOLT 3 PHASE MOTOR W/DODGE TIGER GEARBOX.
|
🔒 Subscribe | |||
|
|
COMMERICAL MFG CO |
COMMERICAL MFG CO CONVEYOR, 48" WIDE VIBRATORY PAN 6" DEEP 55" LONG, STAINLESS STEEL CONSTRUCTION WITH THE PAN BEING DIMPLE PLATED. AJAX SHAKER.
|
🔒 Subscribe | ||
|
|
BANDRITE | 6000-2140-000 |
BANDRITE BAND SEALER - MODEL 6000-2140-000 S/N: 1236TQ
|
🔒 Subscribe | |
|
|
EASTEY | BB-2T-STD |
EASTEY BB-2T-STD CASE SEALER S/N: EZT 1709C17047430
|
🔒 Subscribe | |
|
|
HINDS BOCK |
HINDS BOCK PNEUMATIC PISTON PUMP
|
🔒 Subscribe | ||
|
|
LOT OF (4) CONTROL BOXES ON PALLET
|
🔒 Subscribe | |||
|
|
SENTRY |
SENTRY OFFICE SAFE
|
🔒 Subscribe | ||
|
|
BALDOR |
4" WIDE "V" BELT FEED CONVEYOR 155" LONG, HAS LEGS ON ONE DRIVE END, BELT DRIVEN, MISSING BELT GUARD, STAINLESS STEEL CONSTRUCTION, 1 HP BALDOR 230/460 VOLT 3 PHASE ELECTRIC MOTOR.
|
🔒 Subscribe | ||
|
|
SIZE 36" ELECTRIC DRIVE TYPE TRIM CONVEYOR W/ 6 WORK STATIONS, SINGLE BELT DESIGN, 36" WIDE RUBBER TYPE BELTING X 197" LONG, 45" HIGH, LEESON WASHGUARD ELECTRIC MOTOR W/ A 40:1 GEARBOX, CHAIN DRIVEN, 1-1/2 HP, 208-230/460 VOLTS 3 PHASE 60 CYCLE 1725RPM.
|
🔒 Subscribe | |||
|
|
THERMO FISCHER SCIENTIFIC | APEX 100 |
THERMO FISCHER SCIENTIFIC APEX 100 STAINLESS STEEL INCLINE CONVEYOR W/ METAL DETECTOR, LAST USED W/ A VERTICAL FORM FILL AND SEAL MACHINE, OPENING ON THE METAL DETECTOR 14" WIDE X 8 3/8" ABOVE THE CONVEYOR BELT. STAINLESS STEEL MOTOR.
|
🔒 Subscribe | |
|
|
THERMO FISHER SCIENTIFIC | APEX 100 |
THERMO FISHER SCIENTIFIC APEX 100 DRIVE TYPE .5HP/ .33 208-230-/460 VOLT INCLINE CONVEYOR W/ METAL DETECTOR, OPENING OF THE METAL DETECTOR 13 3/4" X 3 7/8" ABOVE THE BELT.
|
🔒 Subscribe | |
|
|
ELECTRIC DRIVE TYPE WET HOPPER, 24" WIDE BELT, 2" TALL FLIGHTS, OVERALL WIDTH IS 56", 57" FEED HEIGHT, 69" DISCHARGE HEIGHT, OVERALL LENGTH 134", CONVEYOR EXTENDS OUT FROM LIP OF TANK 13", DISTANCE LEG TO LEG 78", WIDTH OVERALL 56" NEAR FEED END, TANK WIDTH FOR ALL.
|
🔒 Subscribe | |||
|
|
LOT OF (2) 8' LIGHTWEIGHT OVERHEAD DOOR OPENERS
|
🔒 Subscribe | |||
|
|
LOT OF (2) ROLLER CONVEYORS - (1) 21" X 5' AND (1) CURVED 16" X 6'
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 10" X 30')
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 10" X 20')
|
🔒 Subscribe | |||
|
|
2009 | KWIK LOK | AKM57NRPL |
2009 KWIK LOK AKM57NRPL BAG CLOSER S/N: 90243-2009
|
🔒 Subscribe |
|
|
SIZE 11" STAINLESS FRAME CONVEYOR W/ PLASTIC CONVEYOR CHAIN TYPE BELTING, FRAME HAS LONG LEGS, 64" LONG X 11" WIDE, CURRENTLY APPROX 50" TALL, ELECTRIC MOTOR DRIVE SYSTEM.
|
🔒 Subscribe | |||
|
|
SIZE 10" FLAT BELT CONVEYOR, 10" WIDE W/ SIDE RAILS, STAINLESS STEEL FRAME CONSTRUCTION, BELT LENGTH 40", ELECTRIC SEW MOTOR.
|
🔒 Subscribe | |||
|
|
SIZE 11" 90 DEGREE CURVED CONVEYOR 55" X 72" X 11" WIDE, HAS DIRECT DRIVE MOTOR, STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |||
|
|
SWM | DEWATERING SHAKER |
SWM MODEL DEWATERING SHAKER SIZE 24" DEWATERING SHAKER W/ 2 DECKS, CONSTRUCTED OF STAINLESS STEEL, HAS CLAMPS AND SCREEN FOR EACH DECK, HAS A PREMIUM EFFICIENT ELECTRIC STAINLESS STEEL MOTOR MANUFACTURED BY STERLING, 1 HP 208-230-460 VOLT 3 PHASE 60 CYCLE, WITH/ ISO-FLO DRIVE, CURRENT FEED HEIGHT IS 65" WIDTH 24" 118" OVERALL LENGTH IN CURRENT CONFIGURATION W/ THE VALVED DISCHARGE, VALVED DISCHARGE CAN BE REMOVED IF NECESSARY W/ A COUPLE OF BOLTS AND THUS REDUCE THE LENGTH BY APPROX 11", CURRENT DISCHARGE APPROX 61", HAS A SIDE DISCHARGE FOR THE LOWER SCREEN SOLIDS, END DISCHARGE FOR THE TOP SCREEN, TOP DECK 72" LONG USABLE LENGTH AND 24" WIDE USABLE WIDTH, CONTACT SURFACES THAT ARE NOT BY SCREEN ARE OF DIMPLE STAINLESS STEEL PAN, OVERALL WIDTH 44". S/N: 2013-130
|
🔒 Subscribe | |
|
|
SIZE 18" CONVEYOR CONSTRUCTED W/ A STAINLESS STEEL FRAME, 18" WIDE BELT X 5' LONG, 36" HIGH, ON WHEELS.
|
🔒 Subscribe | |||
|
|
HEINZEN INTERNATIONAL |
HEINZEN INTERNATIONAL FLUME FEED SECTION, THE FLUME SECTION IS 58" LONG W/BOLT FLANGE ON END.
|
🔒 Subscribe | ||
|
|
URSCHEL | OV |
URSCHEL MODEL OV USED CUTTING WHEEL, VERY NICE CONDITION, 18 BLADES. 7/32", 7/16", 43/64", 1 21/64" CUTS, PART#27242400 SERIES WHEEL.
|
🔒 Subscribe | |
|
|
ORICS | MODEL DOUBLE TRAY CONVEYOR SIZE 12" |
ORICS MODEL DOUBLE TRAY CONVEYOR SIZE 12" FLAT CONVEYOR, 2 LANES. 12' LONG, 11 1/2" SPACING BETWEEN FLIGHTS, 1 HIGH FLIGHT, HAS 3/4 HP STAINLESS STEEL ELECTRIC MOTOR, 6" WIDE BELTS, HAS A TOPPER SECTION TO COMPRESS THE PRODUCT IN THE TRAY.
|
🔒 Subscribe | |
|
|
SIZE 5" VERTICAL INCLINE CONVEYOR W/CUP FLIGHTS AND SIDES, 5" WIDE CUP, 113" DISCHARGE, FEED HEIGHT APPROX 35", ON WHEELS W/MOTOR, FEED HEIGHT CAN BE ADJUST WITH SOME MODIFICATIONS.
|
🔒 Subscribe | |||
|
|
A/V COMPONENT CAGE WITH CONTENTS (APPROX. 2' X 38" X 4')
|
🔒 Subscribe | |||
|
|
BELT CONVEYOR (APPROX. 16" X 6')
|
🔒 Subscribe |
DAYTON 2C890
DAYTON MODEL #2C890 SINGLE INLET FORWARD CURVE DIRECT DRIVE BLOWER,DRIVE TYPE 3/4 HP, 115/230 VOLT S...
CUSTOM STAINLESS STEEL CLEANING REEL W/TANK AND PUMP, 34" LONG X 18" DIAMETER SCREEN, FLOW SERVE 3X3
FMC SYNTRON BF2-A
FMC SYNTRON BF2-A 115 VOLT MAGNETIC FEEDER W/STAINLESS STEEL PAN 36" LONG X 8" WIDE X 4" DEEP, 4.0 A...
FMC SYNTRON BF2-A
FMC SYNTRON BF2-A 115 VOLT MAGNETIC FEEDER W/STAINLESS STEEL PAN 36" LONG X 8" WIDE X 4" DEEP, 4.0 A...
HYTROL 190 LRC
HYTROL MODEL 190 LRC POWER CURVE CONVEYOR, 24" ROLLERS, 90 DEGREES, DRIVE TYPE 1/2 HP, RELIANCE AC 2...
1999 MEYER VF11-12-5X13-10
1999 MEYER VF11-12-5X13-10 VIBRATORY CONVEYOR W/DIMPLE STAINLESS STEEL PAN, STAINLESS STEEL CONSTRUC...
BOSTON GEARBOX F73260B7J
BOSTON GEARBOX MODEL #F73260B7J, NEW, INPUT HP=1.52, RATIO 60 EX, OUTPUT TORQUE=2194 LB INCH....
BOSTON GEARBOX F73260B76
BOSTON GEARBOX MODEL #F73260B76, NEW, INPUT HP=1.52, RATIO 60 EX, OUTPUT TORQUE=2194 LB INCH....
CONVEYOR FRAME 40"LONG X 32" WIDE, NO DRIVE.
FMC-FOOD TECH/ALLEN ULTRA 24/1205X117
FMC-FOOD TECH/ALLEN MODEL ULTRA 24/1205X117 VIBRATORY CONVEYOR W/REMOVABLE SCRRENS, DIMPLE STAINLESS...
3M A20
3M MODEL A20 2" WIDE CASE TAPING MACHINE S/N: 50625 TOP AND BOTTOM, HAS 2 BOTTOM CASE MOVEMENT BELTS...
3M 110A
3M MODEL 110A LOWER BELTS, TOP AND BOTTOM DESIGN, HAS DISCHARGE ROLLER S/N: 503 | 3M MODEL 110A SERI...
FEI INC.
FEI INC. 2 SECTIONS OF CONVEYOR, 10' LONG X 18" WIDE AND 5' LONG X 18" LONG....
MATRIX 67512
MATRIX 67512 BAG SQUEEZER-FOR A MATRIX BAGGER, LIKELY FOR 5# BAGS OF FRESH CUT VEGETABLES....
MATRIX 13000 FBW
MATRIX 13000 FBW MATRIX FORMING TUBE, PART #68838 S/N: 83481DSL...
CMS GILBRETH
CMS GILBRETH BAND SEALER HEAT TUNNEL, 5" X 40" OPENING, ELECTRIC HEATED, DESIGNED TO SET OVER A CONV...
WATERFALLS 26"
WATERFALLS 26" SHREDDER, STAINLESS STEEL CONSTRUCTION, CURRENTLY NO CUTTING WHEEL....
LAFFERTY
LAFFERTY SANITZER, PORTABLE SANITZER, STAINLESS STEEL PORTABLE 2 WHEELED CART....
RELIANCE
STAINLESS STEEL CONVEYOR BELT W/ BACK SPLASH, BLACK RUBBER TYPE BELTING, 18" WIDE X 13' LONG X APPRO...
URSCHEL OV
URSCHEL MODEL OV CUTTING WHEELS WITH 17 BLADES. NO NUTS....
TS DESIGNS MODEL JR. DRYER CENTRIFUGE
TS DESIGNS MODEL JR. DRYER CENTRIFUGE, 20 GALLON BASKET DRYER, DESIGNED FOR USE WITH A 20 GALLON BRU...
DBW DBWGI-350
DBW DBWGI-350 WEIGH BELT CONVEYER, DESIGNED TO ASSIST MEETERING DRY PRODUCTS OR MATERIALS, STAINLESS...
DOUGH CHUNKER, CONSTRUCTED FROM UHMW TYPE MATERIALS, 15 1/2" OPEN FEED TO ROTATING DRUM WITH SLOTS 1
COMMERICAL MFG CO
COMMERICAL MFG CO CONVEYOR, 48" WIDE VIBRATORY PAN 6" DEEP 55" LONG, STAINLESS STEEL CONSTRUCTION WI...
BANDRITE 6000-2140-000
BANDRITE BAND SEALER - MODEL 6000-2140-000 S/N: 1236TQ...
EASTEY BB-2T-STD
EASTEY BB-2T-STD CASE SEALER S/N: EZT 1709C17047430...
HINDS BOCK
HINDS BOCK PNEUMATIC PISTON PUMP...
LOT OF (4) CONTROL BOXES ON PALLET
SENTRY
SENTRY OFFICE SAFE...
BALDOR
4" WIDE "V" BELT FEED CONVEYOR 155" LONG, HAS LEGS ON ONE DRIVE END, BELT DRIVEN, MISSING BELT GUARD...
SIZE 36" ELECTRIC DRIVE TYPE TRIM CONVEYOR W/ 6 WORK STATIONS, SINGLE BELT DESIGN, 36" WIDE RUBBER T
THERMO FISCHER SCIENTIFIC APEX 100
THERMO FISCHER SCIENTIFIC APEX 100 STAINLESS STEEL INCLINE CONVEYOR W/ METAL DETECTOR, LAST USED W/ ...
THERMO FISHER SCIENTIFIC APEX 100
THERMO FISHER SCIENTIFIC APEX 100 DRIVE TYPE .5HP/ .33 208-230-/460 VOLT INCLINE CONVEYOR W/ METAL D...
ELECTRIC DRIVE TYPE WET HOPPER, 24" WIDE BELT, 2" TALL FLIGHTS, OVERALL WIDTH IS 56", 57" FEED HEIGH
LOT OF (2) 8' LIGHTWEIGHT OVERHEAD DOOR OPENERS
LOT OF (2) ROLLER CONVEYORS - (1) 21" X 5' AND (1) CURVED 16" X 6'
BELT CONVEYOR (APPROX. 10" X 30')
BELT CONVEYOR (APPROX. 10" X 20')
2009 KWIK LOK AKM57NRPL
2009 KWIK LOK AKM57NRPL BAG CLOSER S/N: 90243-2009...
SIZE 11" STAINLESS FRAME CONVEYOR W/ PLASTIC CONVEYOR CHAIN TYPE BELTING, FRAME HAS LONG LEGS, 64" L
SIZE 10" FLAT BELT CONVEYOR, 10" WIDE W/ SIDE RAILS, STAINLESS STEEL FRAME CONSTRUCTION, BELT LENGTH
SIZE 11" 90 DEGREE CURVED CONVEYOR 55" X 72" X 11" WIDE, HAS DIRECT DRIVE MOTOR, STAINLESS STEEL CON
SWM DEWATERING SHAKER
SWM MODEL DEWATERING SHAKER SIZE 24" DEWATERING SHAKER W/ 2 DECKS, CONSTRUCTED OF STAINLESS STEEL, H...
SIZE 18" CONVEYOR CONSTRUCTED W/ A STAINLESS STEEL FRAME, 18" WIDE BELT X 5' LONG, 36" HIGH, ON WHEE
HEINZEN INTERNATIONAL
HEINZEN INTERNATIONAL FLUME FEED SECTION, THE FLUME SECTION IS 58" LONG W/BOLT FLANGE ON END....
URSCHEL OV
URSCHEL MODEL OV USED CUTTING WHEEL, VERY NICE CONDITION, 18 BLADES. 7/32", 7/16", 43/64", 1 21/64" ...
ORICS MODEL DOUBLE TRAY CONVEYOR SIZE 12"
ORICS MODEL DOUBLE TRAY CONVEYOR SIZE 12" FLAT CONVEYOR, 2 LANES. 12' LONG, 11 1/2" SPACING BETWEEN ...
SIZE 5" VERTICAL INCLINE CONVEYOR W/CUP FLIGHTS AND SIDES, 5" WIDE CUP, 113" DISCHARGE, FEED HEIGHT
A/V COMPONENT CAGE WITH CONTENTS (APPROX. 2' X 38" X 4')
BELT CONVEYOR (APPROX. 16" X 6')