HAAS VR11 VR9 VF9 VF7 VF5SS VF4SS VF3SS VF2SS 2 VERSON WHEELON PRESSES 2017 BAKER ANODIZING LINE HUFFORD A10 STRETCH FORMER

United Asset Sales

Category: PRESSES & FORMING

Total Lots: 1,150

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 1,150 lots

Year	Make	Model	Lot Description	Hammer Price
	VERSON WHEELON	21000R-50-168	VERSON WHEELON 21000R-50-168 FORMING PRESS, DIRECT ACTING, HYDRAULIC, FLEX-DIE RUBBER PAD, S/N 13249, SPECIFICATIONS: FLUID FORMING CAPACITY TONNAGE: 21,000, FORMING PRESSURE: 5,000 P.S.I. MAX., TRAY: (2), TRAY SIZE AT TOP 50" X 164" (1,270MM X 4,165.6MM), TRAY AREA AT 5" DEPTH 44" X 158" (1,117.6MM X 4,019.55MM), TRAY AREA AT 7" DEPTH 38" X 152" (965.2MM X 3,860.8MM), MOTOR DRIVES: WIRED 440 VOLTS, 3 PHASE, HIGH PRESSURE PUMPS 75 HP (55.2KW), VOLUME PUMP EVACUATING 30 HP (22.07KW), FILTER PUMP 1/3 HP (24.55KW), CONTROLS: WIRED 115 VOLTS, (1) OPERATOR CONTROL STATION, (2) SIDE CONTROLS STATIONS AT END OF BARREL W/EMERGENCY STOP, EQUIPPED WITH: (2) THROW PAD ROLL-UP DEVICE, FLUID CELL, (1) RUBBER PAD, ELECTRICAL STARTER PANELS, COMPLETE FACTORY SAFETY GUARDS, DIMENSIONS POWER UNIT AND RIGHT TRAY 130"F-B X 389"L-R X 144" ABOVE FLOOR, 18" BELOW FLOOR OVER-ALL HEIGHT 162", DIMENSIONS POWER UNIT & RIGHT TRAY (3,302MM) F-B X (9,880.6MM) L-R, (3,657.6MM) ABOVE FLOOR + (457.2MM) BELOW FLOOR OVER-ALL HEIGHT (4,1148MM) VERSON WHEELON · 21000R-50-168	🔒 Subscribe
	VERSON WHEELON	29000R-50-116	VERSON WHEELON 29000R-50-116 FORMING PRESS, FLEX-DIE RUBBER PAD, S/N 27296, FLUID FORMING CAPACITY TONNAGE 29,000, FORMING PRESSURE 10,000 P.S.I., TRAYS: TWO TRAY SIZE AT TOP 50" X 116" (1,270MM X 2,946.4 MM) RIGHT TRAY AREA AT A 6 INCH (152.4MM) DEPTH 42" X 109" (1,079.5MM X 2,768.6MM), LEFT TRAY AREA AT A 10 INCH (254MM) DEPTH 37" X 104", MOTOR DRIVES: ALL MOTORS WIRED 440 VOLTS, 3 PHASE, (2) EVACUATE HIGH PRESSURE PUMPS 75 HP & 150 HP, (1) ACC PUMP 30 HP, (1) PILOT PUMP 20 HP, (1) VACUUM PUMP 15 HP, (1) FILTER PUMP 1/4 HP, CONTROLS: WIRED 115 VOLTS, OPERATOR CONTROL STATION LOCATED CENTER OF BARREL, (2) SIDE CONTROLS STATIONS LOCATED AT END OF EACH BARREL WITH EMERGENCY STOP BUTTONS, EQUIPPED WITH: (1) POWER UNIT AND OIL RESERVOIR, (1) NITROGEN INTENSIFIER PUMP, (2) THROW PAD ROLL-UP DEVICE FOR EACH TABLE, (1) ACCUMULATOR HYDRAULIC OIL STORAGE TANK, (1) FLUID CELL, (1) RUBBER PAD, ELECTRICAL STARTER PANELS, COMPLETE FACTORY SAFETY GUARDS, DIMENSIONS 342.16" L-R X 120", F-B X 1873/8"HEIGHT WITH FILL LINES, MAIN CHAMBER WITH FILL LINES, HEIGHT ABOVE GROUND 161 7/8" (428.63MM), POWER UNIT AND OIL RESERVOIR F-B 96" X 178" (2,438.4MM X4,521.2MM, INTENSIFIER 33" X 33" X 132" HT. (38.2MM X 838.2MM X 3,352.8MM), ACCUMULATOR 80" DIAMETER X 186" HT. CONTROL PANEL 144" LR X 18" FB X 91" HT., APPROX. WT. 363,700 LBS, (2,032MM DIAMETER X 4,724.4MM HT.) 3,657.6MM FB X 457.2 FB X 2,311.4MM HT VERSON WHEELON · 29000R-50-116	🔒 Subscribe
2006	HAAS	VR-11B	2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36" TABLE, 10000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 20 HP SPINDLE, 40 TAPER, 32 ATC, REMOTE JOG HANDLE, S/N 49668 2006 · HAAS · VR-11B	🔒 Subscribe
2006	HAAS	VR-11B	2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36" TABLE, 10000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 20 HP SPINDLE, 40 TAPER, 32 ATC, REMOTE JOG HANDLE, S/N 49667 2006 · HAAS · VR-11B	🔒 Subscribe
2006	HAAS	VR-9	2006 HAAS VR-9 VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, XYZ TRAVELS: 84" X, 40" Y, 30" Z, 84" X 36" TABLE, 15000 RPM SPINDLE, 20 HP SPINDLE, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, REMOTE JOG HANDLE, S/N 1052742 2006 · HAAS · VR-9	🔒 Subscribe
2008	HAAS	EC-400PP	2008 HAAS EC-400PP HORIZONTAL MACHINING CENTER, XYZ TRAVELS: 22" X 25" X 22", 6-STATION PALLET POOL, 15.75" X 15.75" PALLETS, AUTOMATIC PALLET CHANGER, 12000 RPM, 40 TAPER SPINDLE, 30 HP, INLINE DIRECT DRIVE SPINDLE, 70 POCKET SMTC, THROUGH COOLANT SPINDLE, CHIP CONVEYOR, LOAD & UNLOAD STATION, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, HAAS 4TH AXIS ROTARY TABLE, (2) CHICK TOMB STONES, (2) KURT VISES, S/N 2052621 2008 · HAAS · EC-400PP	🔒 Subscribe
	HUFFORD	A-10	HUFFORD A-10 STRETCH WRAP FORMING MACHINE, CAPACITY: 17.5 TONS, TABLE DIMENSIONS 30" X 65", TABLE HEIGHT 35.5", MAXIMUM PART LENGTH FORMED 219", STANDARD ARM MINIMUM PART LENGTH FORMED 10", MAXIMUM DIE HEIGHT 20", MAXIMUM DIE LENGTH @ 180 DEG. 68", MINIMUM DIE LENGTH @ 180 DEGREE, S/N 24, W/ ALL JAWS AND DIES IN RACK AS PICTURED HUFFORD · A-10	🔒 Subscribe
2007	HAAS	VF-9/40	2007 HAAS VF-9/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 40" X 30", 84" X 36" TABLE, 10000 RPM SPINDLE, 30 HP, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, 2 SPEED GEAR DRIVE, REMOTE JOG HANDLE 4TH AXIS READY, MIDACO SERIES 80SD AUTOMATIC ALUMINUM AUTO DOOR PALLET CHANGER, CHIP BLASTER, S/N 1060941 2007 · HAAS · VF-9/40	🔒 Subscribe
2007	HAAS	VF-3SS	2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, HIGH SPEED AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, REMOTE JOG HANDLE, RENISHAW PROBING SYSTEM, S/N 1062070 2007 · HAAS · VF-3SS	🔒 Subscribe
2009	HAAS	GR-512	2009 HAAS GR-512 GANTRY ROUTER, 5' X 12' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" Z-AXIS STROKE, (10) ATC, TABLE HOLD DOWN SCREW FIXTURES, S/N 1071513 2009 · HAAS · GR-512	🔒 Subscribe
2012	FLOW	M2-1313B	2012 FLOW M2-1313B WATERJET CUTTING MACHINE, TABLE SIZE 13X13M, FLOWMASTER VERSION 6 SOFTWARE, S/N 120465 2012 · FLOW · M2-1313B	🔒 Subscribe
2007	HAAS	VF-5SS	2007 HAAS VF-5SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT DRIVE SPINDLE, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, REMOTE JOG HANDLE, RENISHAW PROBING SYSTEM, S/N 1056788 2007 · HAAS · VF-5SS	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065953 2008 · HAAS · VF-2SS	🔒 Subscribe
2007	HAAS	VF-3SS	2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, HIGH SPEED AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, JOG HANDLE, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1062023 2007 · HAAS · VF-3SS	🔒 Subscribe
2009	HAAS	VF-5D/40	2009 HAAS VF-5D/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC, VECTOR DUAL DRIVE, THROUGH COOLANT SPINDLE, 20 HP, 7500 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, CHIP BLASTER, REMOTE JOG HANDLE, S/N 1073797 2009 · HAAS · VF-5D/40	🔒 Subscribe
2007	HAAS	VF-2SS	2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, JIG HANDLE, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, S/N 1056986 2007 · HAAS · VF-2SS	🔒 Subscribe
2006	HAAS	VF-7B/40	2006 HAAS VF-7B/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 32" X 30", 36" X 14" TABLE, 10000 RPM, THROUGH SPINDLE COOLANT, 30 HP SPINDLE, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, 2 SPEED GEAR DRIVE, AUTOMATIC CHIP AUGER, 4TH AXIS READY, MIDACO SERIES 80SD AUTOMATIC ALUMINUM AUTO DOOR PALLET CHANGER, CHIP BLASTER, S/N 1052111 2006 · HAAS · VF-7B/40	🔒 Subscribe
2007	HAAS	VF-4SS APCQ MINI FMS	2007 HAAS VF-4SS APCQ MINI FMS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 40 ATC, SIDE MOUNT TOOL CHANGER, THROUGH COOLANT SPINDLE, INLINE DIRECT DRIVE, 12000 RPM, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, AUTOMATIC PALLET CHANGER, CHIP BLASTER, S/N 1056650 2007 · HAAS · VF-4SS APCQ MINI FMS	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065971 2008 · HAAS · VF-2SS	🔒 Subscribe
2006	HAAS	GR-510	2006 HAAS GR-510 GANTRY ROUTER, 5' X 10' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" Z-AXIS STROKE, (10) ATC, TABLE HOLD DOWN SCREW FIXTURES, S/N 1052759 2006 · HAAS · GR-510	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065972 2008 · HAAS · VF-2SS	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065968 2008 · HAAS · VF-2SS	🔒 Subscribe
2007	HAAS	VF-2SS	2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, JIG HANDLE, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, S/N 1059023 2007 · HAAS · VF-2SS	🔒 Subscribe
2011	KOMO	MACH ONE BT 512	2011 KOMO MACH ONE BT 512 CNC ROUTER S/N: 01091-10 2011 · KOMO · MACH ONE BT 512	🔒 Subscribe
			4-POST HYDRAULIC RUBBER BOX PRESS, 36" X 60" BED	🔒 Subscribe
2003	FLOW	WATERJET CUTTING MACHINE	2003 FLOW WATERJET CUTTING MACHINE, 6' X 12' TABLE, 60,000 PSI, FLOWMASTER VERSION 6 SOFTWARE, S/N NA 2003 · FLOW · WATERJET CUTTING MACHINE	🔒 Subscribe
2008	KOMO	VR512 MACHXTRM	2008 KOMO VR512 MACHXTRM CNC ROUTER S/N: 68621-08 2008 · KOMO · VR512 MACHXTRM	🔒 Subscribe
	JANDA	PMFD3-170-24RTDF	JANDA PMFD3-170-24RTDF SPOT WELDER, 170 KVA, 36" THROAT, S/N: P-3604, W/ WELD COMPUTER CONTROLS JANDA · PMFD3-170-24RTDF	🔒 Subscribe
2005	HAAS	VF-4SSAPC	2005 HAAS VF-4SSAPC VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, AUTOMATIC PALLET CHANGER, S/N 43310 2005 · HAAS · VF-4SSAPC	🔒 Subscribe
2006	HAAS	VF-2D	2006 HAAS VF-2D VERTICAL MACHINING CENTER, VOP-B, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, 20 HP, 10000 RPM, 40 TAPER, VICTOR DUAL DRIVE, AUTOMATIC CHIP AUGER, 4TH AXIS READY, S/N 1051900 2006 · HAAS · VF-2D	🔒 Subscribe
2005	HAAS	VF-2D	2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 10000 RPM, 40 TAPER, RENISHAW PROBING SYSTEM, AUTOMATIC CHIP AUGER, S/N 46291 2005 · HAAS · VF-2D	🔒 Subscribe
2004	HAAS	VF-4D	2004 HAAS VF-4D VERTICAL MACHINING CENTER, VOP-A, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 20 HP, 10000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, RENISHAW PROBING SYSTEM, 4TH AXIS READY, S/N 38605 2004 · HAAS · VF-4D	🔒 Subscribe
2005	HAAS	VF-2D	2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 10000 RPM, 40 TAPER, RENISHAW PROBING SYSTEM, AUTOMATIC CHIP AUGER, S/N 46292 2005 · HAAS · VF-2D	🔒 Subscribe
2002	HAAS	VF-4 BAPC	2002 HAAS VF-4 BAPC VERTICAL MACHINING CENTER, VOP-D, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, THROUGH COOLANT SYSTEM, 30 HP, 10000 RPM, 1200 IPM, 40 TAPER, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, AUTOMATIC PALLET CHANGER, S/N 28304 2002 · HAAS · VF-4 BAPC	🔒 Subscribe
	MACHINE TECHNOLOGIES	24-6145	MACHINE TECHNOLOGIES 4-POST HOT FORMING PRESS, 24" X 24" PLATENS, W/ OVEN S/N: 87-61701-1 MACHINE TECHNOLOGIES · 24-6145	🔒 Subscribe
	HAAS	TR210H	HAAS TR210H 5-AXIS TRUNNION ROTARY TABLE S/N: 900869 HAAS · TR210H	🔒 Subscribe
			INDUSTRIAL WASH LINE SYSTEM	🔒 Subscribe
1995	GREENERD	HCA-50-60R8	1995 GREENERD HCA-50-60R8 C-FRAME HYDRAULIC PRESS, 50 TON, S/N 95T5032 1995 · GREENERD · HCA-50-60R8	🔒 Subscribe
	MARCHANT		MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC MARCHANT	🔒 Subscribe
	MARCHANT	12A	MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 58 MARCHANT · 12A	🔒 Subscribe
2006	KOMO	VR512	2006 KOMO VR512 CNC ROUTER MACHONE SHO S/N: 57952-06 2006 · KOMO · VR512	🔒 Subscribe
	VIDEOJET	1510	VIDEOJET 1510 INKJET PRINTER VIDEOJET · 1510	🔒 Subscribe
	MARCHANT	12A	MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 378 MARCHANT · 12A	🔒 Subscribe
	W. MILLER CO.		W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 15'-1"L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON CYCLOMAX NAT. GAS FIRED LOW-NOX BURNER, ONE 1/2 HP COMBUSTION AIR BLOWER, ONE 3 HP CIRCULATION BLOWER, AND ONE 1/3 HP EXHAUST FAN W. MILLER CO.	🔒 Subscribe
	HAIMER	POWER CLAMP	HAIMER POWER CLAMP SHRINK FIT MACHINE HAIMER · POWER CLAMP	🔒 Subscribe
	W. MILLER CO.		W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 9'L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON CYCLOMAX NAT. GAS FIRED LOW-NOX BURNER, ONE 1/2 HP COMBUSTION AIR BLOWER, ONE 3 HP CIRCULATION BLOWER AND ONE 1/3 HP EXHAUST FAN, INCLUDES RACK INSIDE W. MILLER CO.	🔒 Subscribe
	MARCHANT	6A	MARCHANT 6A SHRINKING & STRETCHING MACHINE, 6" THROAT, PNEUMATIC, S/N: 182 MARCHANT · 6A	🔒 Subscribe
	SCIAKY	SPT.2-30-75-36	SCIAKY SPT.2-30-75-36 SPOT WELDER, 100 KVA, 3-PHASE, 36" THROAT, S/N: 8887, W/ III RESISTANCE WELDING CONTROLLER, MODEL 302A SCIAKY · SPT.2-30-75-36	🔒 Subscribe
	MARCHANT		MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC MARCHANT	🔒 Subscribe
	BRIDGEPORT/HARDINGE	VERTICAL MILL	BRIDGEPORT/HARDINGE VERTICAL MILL W/ ACU-RITE 200S 2X M DRO, J-HEAD S/N HJ318479 BRIDGEPORT/HARDINGE · VERTICAL MILL	🔒 Subscribe

Year	Make	Model	Description	Price
	VERSON WHEELON	21000R-50-168	VERSON WHEELON 21000R-50-168 FORMING PRESS, DIRECT ACTING, HYDRAULIC, FLEX-DIE RUBBER PAD, S/N 13249, SPECIFICATIONS: FLUID FORMING CAPACITY TONNAGE: 21,000, FORMING PRESSURE: 5,000 P.S.I. MAX., TRAY: (2), TRAY SIZE AT TOP 50" X 164" (1,270MM X 4,165.6MM), TRAY AREA AT 5" DEPTH 44" X 158" (1,117.6MM X 4,019.55MM), TRAY AREA AT 7" DEPTH 38" X 152" (965.2MM X 3,860.8MM), MOTOR DRIVES: WIRED 440 VOLTS, 3 PHASE, HIGH PRESSURE PUMPS 75 HP (55.2KW), VOLUME PUMP EVACUATING 30 HP (22.07KW), FILTER PUMP 1/3 HP (24.55KW), CONTROLS: WIRED 115 VOLTS, (1) OPERATOR CONTROL STATION, (2) SIDE CONTROLS STATIONS AT END OF BARREL W/EMERGENCY STOP, EQUIPPED WITH: (2) THROW PAD ROLL-UP DEVICE, FLUID CELL, (1) RUBBER PAD, ELECTRICAL STARTER PANELS, COMPLETE FACTORY SAFETY GUARDS, DIMENSIONS POWER UNIT AND RIGHT TRAY 130"F-B X 389"L-R X 144" ABOVE FLOOR, 18" BELOW FLOOR OVER-ALL HEIGHT 162", DIMENSIONS POWER UNIT & RIGHT TRAY (3,302MM) F-B X (9,880.6MM) L-R, (3,657.6MM) ABOVE FLOOR + (457.2MM) BELOW FLOOR OVER-ALL HEIGHT (4,1148MM)	🔒 Subscribe
	VERSON WHEELON	29000R-50-116	VERSON WHEELON 29000R-50-116 FORMING PRESS, FLEX-DIE RUBBER PAD, S/N 27296, FLUID FORMING CAPACITY TONNAGE 29,000, FORMING PRESSURE 10,000 P.S.I., TRAYS: TWO TRAY SIZE AT TOP 50" X 116" (1,270MM X 2,946.4 MM) RIGHT TRAY AREA AT A 6 INCH (152.4MM) DEPTH 42" X 109" (1,079.5MM X 2,768.6MM), LEFT TRAY AREA AT A 10 INCH (254MM) DEPTH 37" X 104", MOTOR DRIVES: ALL MOTORS WIRED 440 VOLTS, 3 PHASE, (2) EVACUATE HIGH PRESSURE PUMPS 75 HP & 150 HP, (1) ACC PUMP 30 HP, (1) PILOT PUMP 20 HP, (1) VACUUM PUMP 15 HP, (1) FILTER PUMP 1/4 HP, CONTROLS: WIRED 115 VOLTS, OPERATOR CONTROL STATION LOCATED CENTER OF BARREL, (2) SIDE CONTROLS STATIONS LOCATED AT END OF EACH BARREL WITH EMERGENCY STOP BUTTONS, EQUIPPED WITH: (1) POWER UNIT AND OIL RESERVOIR, (1) NITROGEN INTENSIFIER PUMP, (2) THROW PAD ROLL-UP DEVICE FOR EACH TABLE, (1) ACCUMULATOR HYDRAULIC OIL STORAGE TANK, (1) FLUID CELL, (1) RUBBER PAD, ELECTRICAL STARTER PANELS, COMPLETE FACTORY SAFETY GUARDS, DIMENSIONS 342.16" L-R X 120", F-B X 1873/8"HEIGHT WITH FILL LINES, MAIN CHAMBER WITH FILL LINES, HEIGHT ABOVE GROUND 161 7/8" (428.63MM), POWER UNIT AND OIL RESERVOIR F-B 96" X 178" (2,438.4MM X4,521.2MM, INTENSIFIER 33" X 33" X 132" HT. (38.2MM X 838.2MM X 3,352.8MM), ACCUMULATOR 80" DIAMETER X 186" HT. CONTROL PANEL 144" LR X 18" FB X 91" HT., APPROX. WT. 363,700 LBS, (2,032MM DIAMETER X 4,724.4MM HT.) 3,657.6MM FB X 457.2 FB X 2,311.4MM HT	🔒 Subscribe
2006	HAAS	VR-11B	2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36" TABLE, 10000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 20 HP SPINDLE, 40 TAPER, 32 ATC, REMOTE JOG HANDLE, S/N 49668	🔒 Subscribe
2006	HAAS	VR-11B	2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36" TABLE, 10000 RPM SPINDLE, THROUGH SPINDLE COOLANT, 20 HP SPINDLE, 40 TAPER, 32 ATC, REMOTE JOG HANDLE, S/N 49667	🔒 Subscribe
2006	HAAS	VR-9	2006 HAAS VR-9 VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, XYZ TRAVELS: 84" X, 40" Y, 30" Z, 84" X 36" TABLE, 15000 RPM SPINDLE, 20 HP SPINDLE, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, REMOTE JOG HANDLE, S/N 1052742	🔒 Subscribe
2008	HAAS	EC-400PP	2008 HAAS EC-400PP HORIZONTAL MACHINING CENTER, XYZ TRAVELS: 22" X 25" X 22", 6-STATION PALLET POOL, 15.75" X 15.75" PALLETS, AUTOMATIC PALLET CHANGER, 12000 RPM, 40 TAPER SPINDLE, 30 HP, INLINE DIRECT DRIVE SPINDLE, 70 POCKET SMTC, THROUGH COOLANT SPINDLE, CHIP CONVEYOR, LOAD & UNLOAD STATION, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, HAAS 4TH AXIS ROTARY TABLE, (2) CHICK TOMB STONES, (2) KURT VISES, S/N 2052621	🔒 Subscribe
	HUFFORD	A-10	HUFFORD A-10 STRETCH WRAP FORMING MACHINE, CAPACITY: 17.5 TONS, TABLE DIMENSIONS 30" X 65", TABLE HEIGHT 35.5", MAXIMUM PART LENGTH FORMED 219", STANDARD ARM MINIMUM PART LENGTH FORMED 10", MAXIMUM DIE HEIGHT 20", MAXIMUM DIE LENGTH @ 180 DEG. 68", MINIMUM DIE LENGTH @ 180 DEGREE, S/N 24, W/ ALL JAWS AND DIES IN RACK AS PICTURED	🔒 Subscribe
2007	HAAS	VF-9/40	2007 HAAS VF-9/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 40" X 30", 84" X 36" TABLE, 10000 RPM SPINDLE, 30 HP, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, 2 SPEED GEAR DRIVE, REMOTE JOG HANDLE 4TH AXIS READY, MIDACO SERIES 80SD AUTOMATIC ALUMINUM AUTO DOOR PALLET CHANGER, CHIP BLASTER, S/N 1060941	🔒 Subscribe
2007	HAAS	VF-3SS	2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, HIGH SPEED AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, REMOTE JOG HANDLE, RENISHAW PROBING SYSTEM, S/N 1062070	🔒 Subscribe
2009	HAAS	GR-512	2009 HAAS GR-512 GANTRY ROUTER, 5' X 12' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" Z-AXIS STROKE, (10) ATC, TABLE HOLD DOWN SCREW FIXTURES, S/N 1071513	🔒 Subscribe
2012	FLOW	M2-1313B	2012 FLOW M2-1313B WATERJET CUTTING MACHINE, TABLE SIZE 13X13M, FLOWMASTER VERSION 6 SOFTWARE, S/N 120465	🔒 Subscribe
2007	HAAS	VF-5SS	2007 HAAS VF-5SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT DRIVE SPINDLE, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, REMOTE JOG HANDLE, RENISHAW PROBING SYSTEM, S/N 1056788	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065953	🔒 Subscribe
2007	HAAS	VF-3SS	2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, HIGH SPEED AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, JOG HANDLE, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1062023	🔒 Subscribe
2009	HAAS	VF-5D/40	2009 HAAS VF-5D/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC, VECTOR DUAL DRIVE, THROUGH COOLANT SPINDLE, 20 HP, 7500 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, CHIP BLASTER, REMOTE JOG HANDLE, S/N 1073797	🔒 Subscribe
2007	HAAS	VF-2SS	2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, JIG HANDLE, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, S/N 1056986	🔒 Subscribe
2006	HAAS	VF-7B/40	2006 HAAS VF-7B/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 32" X 30", 36" X 14" TABLE, 10000 RPM, THROUGH SPINDLE COOLANT, 30 HP SPINDLE, 40 TAPER, 24 ATC, SIDE MOUNT TOOL CHANGER, 2 SPEED GEAR DRIVE, AUTOMATIC CHIP AUGER, 4TH AXIS READY, MIDACO SERIES 80SD AUTOMATIC ALUMINUM AUTO DOOR PALLET CHANGER, CHIP BLASTER, S/N 1052111	🔒 Subscribe
2007	HAAS	VF-4SS APCQ MINI FMS	2007 HAAS VF-4SS APCQ MINI FMS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 40 ATC, SIDE MOUNT TOOL CHANGER, THROUGH COOLANT SPINDLE, INLINE DIRECT DRIVE, 12000 RPM, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, AUTOMATIC PALLET CHANGER, CHIP BLASTER, S/N 1056650	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065971	🔒 Subscribe
2006	HAAS	GR-510	2006 HAAS GR-510 GANTRY ROUTER, 5' X 10' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" Z-AXIS STROKE, (10) ATC, TABLE HOLD DOWN SCREW FIXTURES, S/N 1052759	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065972	🔒 Subscribe
2008	HAAS	VF-2SS	2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, INLINE DIRECT SPINDLE, 30 HP, 12000 RPM, 40 TAPER, 4TH AXIS READY, HIGH INTENSITY LIGHTING, RENISHAW PROBING SYSTEM, REMOTE JOG HANDLE, S/N 1065968	🔒 Subscribe
2007	HAAS	VF-2SS	2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, JIG HANDLE, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, S/N 1059023	🔒 Subscribe
2011	KOMO	MACH ONE BT 512	2011 KOMO MACH ONE BT 512 CNC ROUTER S/N: 01091-10	🔒 Subscribe
			4-POST HYDRAULIC RUBBER BOX PRESS, 36" X 60" BED	🔒 Subscribe
2003	FLOW	WATERJET CUTTING MACHINE	2003 FLOW WATERJET CUTTING MACHINE, 6' X 12' TABLE, 60,000 PSI, FLOWMASTER VERSION 6 SOFTWARE, S/N NA	🔒 Subscribe
2008	KOMO	VR512 MACHXTRM	2008 KOMO VR512 MACHXTRM CNC ROUTER S/N: 68621-08	🔒 Subscribe
	JANDA	PMFD3-170-24RTDF	JANDA PMFD3-170-24RTDF SPOT WELDER, 170 KVA, 36" THROAT, S/N: P-3604, W/ WELD COMPUTER CONTROLS	🔒 Subscribe
2005	HAAS	VF-4SSAPC	2005 HAAS VF-4SSAPC VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, HIGH SPEED SIDE MOUNT TOOL CHANGER, 30 HP, 12000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, HIGH INTENSITY LIGHTING, AUTOMATIC PALLET CHANGER, S/N 43310	🔒 Subscribe
2006	HAAS	VF-2D	2006 HAAS VF-2D VERTICAL MACHINING CENTER, VOP-B, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, 20 HP, 10000 RPM, 40 TAPER, VICTOR DUAL DRIVE, AUTOMATIC CHIP AUGER, 4TH AXIS READY, S/N 1051900	🔒 Subscribe
2005	HAAS	VF-2D	2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 10000 RPM, 40 TAPER, RENISHAW PROBING SYSTEM, AUTOMATIC CHIP AUGER, S/N 46291	🔒 Subscribe
2004	HAAS	VF-4D	2004 HAAS VF-4D VERTICAL MACHINING CENTER, VOP-A, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, 20 HP, 10000 RPM, 40 TAPER, AUTOMATIC CHIP AUGER, RENISHAW PROBING SYSTEM, 4TH AXIS READY, S/N 38605	🔒 Subscribe
2005	HAAS	VF-2D	2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 10000 RPM, 40 TAPER, RENISHAW PROBING SYSTEM, AUTOMATIC CHIP AUGER, S/N 46292	🔒 Subscribe
2002	HAAS	VF-4 BAPC	2002 HAAS VF-4 BAPC VERTICAL MACHINING CENTER, VOP-D, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC, SIDE MOUNT TOOL CHANGER, THROUGH COOLANT SYSTEM, 30 HP, 10000 RPM, 1200 IPM, 40 TAPER, AUTOMATIC CHIP AUGER, REMOTE JOG HANDLE, AUTOMATIC PALLET CHANGER, S/N 28304	🔒 Subscribe
	MACHINE TECHNOLOGIES	24-6145	MACHINE TECHNOLOGIES 4-POST HOT FORMING PRESS, 24" X 24" PLATENS, W/ OVEN S/N: 87-61701-1	🔒 Subscribe
	HAAS	TR210H	HAAS TR210H 5-AXIS TRUNNION ROTARY TABLE S/N: 900869	🔒 Subscribe
			INDUSTRIAL WASH LINE SYSTEM	🔒 Subscribe
1995	GREENERD	HCA-50-60R8	1995 GREENERD HCA-50-60R8 C-FRAME HYDRAULIC PRESS, 50 TON, S/N 95T5032	🔒 Subscribe
	MARCHANT		MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC	🔒 Subscribe
	MARCHANT	12A	MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 58	🔒 Subscribe
2006	KOMO	VR512	2006 KOMO VR512 CNC ROUTER MACHONE SHO S/N: 57952-06	🔒 Subscribe
	VIDEOJET	1510	VIDEOJET 1510 INKJET PRINTER	🔒 Subscribe
	MARCHANT	12A	MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 378	🔒 Subscribe
	W. MILLER CO.		W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 15'-1"L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON CYCLOMAX NAT. GAS FIRED LOW-NOX BURNER, ONE 1/2 HP COMBUSTION AIR BLOWER, ONE 3 HP CIRCULATION BLOWER, AND ONE 1/3 HP EXHAUST FAN	🔒 Subscribe
	HAIMER	POWER CLAMP	HAIMER POWER CLAMP SHRINK FIT MACHINE	🔒 Subscribe
	W. MILLER CO.		W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 9'L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON CYCLOMAX NAT. GAS FIRED LOW-NOX BURNER, ONE 1/2 HP COMBUSTION AIR BLOWER, ONE 3 HP CIRCULATION BLOWER AND ONE 1/3 HP EXHAUST FAN, INCLUDES RACK INSIDE	🔒 Subscribe
	MARCHANT	6A	MARCHANT 6A SHRINKING & STRETCHING MACHINE, 6" THROAT, PNEUMATIC, S/N: 182	🔒 Subscribe
	SCIAKY	SPT.2-30-75-36	SCIAKY SPT.2-30-75-36 SPOT WELDER, 100 KVA, 3-PHASE, 36" THROAT, S/N: 8887, W/ III RESISTANCE WELDING CONTROLLER, MODEL 302A	🔒 Subscribe
	MARCHANT		MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC	🔒 Subscribe
	BRIDGEPORT/HARDINGE	VERTICAL MILL	BRIDGEPORT/HARDINGE VERTICAL MILL W/ ACU-RITE 200S 2X M DRO, J-HEAD S/N HJ318479	🔒 Subscribe

VERSON WHEELON 21000R-50-168

PRESSES & FORMING

VERSON WHEELON 21000R-50-168 FORMING PRESS, DIRECT ACTING, HYDRAULIC, FLEX-DIE RUBBER PAD, S/N 13249...

Hammer Price: 🔒

VERSON WHEELON 29000R-50-116

PRESSES & FORMING

VERSON WHEELON 29000R-50-116 FORMING PRESS, FLEX-DIE RUBBER PAD, S/N 27296, FLUID FORMING CAPACITY T...

Hammer Price: 🔒

2006 HAAS VR-11B

CNC MACHINE CENTERS

2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36...

Hammer Price: 🔒

2006 HAAS VR-11B

CNC MACHINE CENTERS

2006 HAAS VR-11B VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, 120" X, 40" Y, 30" Z, 84" X 36...

Hammer Price: 🔒

2006 HAAS VR-9

CNC MACHINE CENTERS

2006 HAAS VR-9 VERTICAL MACHINING CENTER, 5-AXIS ARTICULATING HEAD, XYZ TRAVELS: 84" X, 40" Y, 30" Z...

Hammer Price: 🔒

2008 HAAS EC-400PP

CNC MACHINE CENTERS

2008 HAAS EC-400PP HORIZONTAL MACHINING CENTER, XYZ TRAVELS: 22" X 25" X 22", 6-STATION PALLET POOL,...

Hammer Price: 🔒

HUFFORD A-10

PRESSES & FORMING

HUFFORD A-10 STRETCH WRAP FORMING MACHINE, CAPACITY: 17.5 TONS, TABLE DIMENSIONS 30" X 65", TABLE HE...

Hammer Price: 🔒

2007 HAAS VF-9/40

CNC MACHINE CENTERS

2007 HAAS VF-9/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 40" X 30", 84" X 36" TABLE, 10000 RP...

Hammer Price: 🔒

2007 HAAS VF-3SS

CNC MACHINE CENTERS

2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, S...

Hammer Price: 🔒

2009 HAAS GR-512

CNC MACHINE CENTERS

2009 HAAS GR-512 GANTRY ROUTER, 5' X 12' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" ...

Hammer Price: 🔒

2012 FLOW M2-1313B

METALWORKING & FABRICATION EQUIPMENT

2012 FLOW M2-1313B WATERJET CUTTING MACHINE, TABLE SIZE 13X13M, FLOWMASTER VERSION 6 SOFTWARE, S/N 1...

Hammer Price: 🔒

2007 HAAS VF-5SS

CNC MACHINE CENTERS

2007 HAAS VF-5SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC, H...

Hammer Price: 🔒

2008 HAAS VF-2SS

CNC MACHINE CENTERS

2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2007 HAAS VF-3SS

CNC MACHINE CENTERS

2007 HAAS VF-3SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 40" X 20" X 25", 48" X 18" TABLE, 24 ATC, S...

Hammer Price: 🔒

2009 HAAS VF-5D/40

CNC MACHINE CENTERS

2009 HAAS VF-5D/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 26" X 25", 52" X 23" TABLE, 24 ATC,...

Hammer Price: 🔒

2007 HAAS VF-2SS

CNC MACHINE CENTERS

2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2006 HAAS VF-7B/40

CNC MACHINE CENTERS

2006 HAAS VF-7B/40 VERTICAL MACHINING CENTER, XYZ TRAVELS: 84" X 32" X 30", 36" X 14" TABLE, 10000 R...

Hammer Price: 🔒

2007 HAAS VF-4SS APCQ MINI FMS

CNC MACHINE CENTERS

2007 HAAS VF-4SS APCQ MINI FMS VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TA...

Hammer Price: 🔒

2008 HAAS VF-2SS

CNC MACHINE CENTERS

2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2006 HAAS GR-510

CNC MACHINE CENTERS

2006 HAAS GR-510 GANTRY ROUTER, 5' X 10' TABLE; TRAVELING GANTRY STYLE, 20.5" UNDER THE BRIDGE, 11" ...

Hammer Price: 🔒

2008 HAAS VF-2SS

CNC MACHINE CENTERS

2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2008 HAAS VF-2SS

CNC MACHINE CENTERS

2008 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2007 HAAS VF-2SS

CNC MACHINE CENTERS

2007 HAAS VF-2SS VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ATC, H...

Hammer Price: 🔒

2011 KOMO MACH ONE BT 512

WOODWORKING EQUIPMENT

2011 KOMO MACH ONE BT 512 CNC ROUTER S/N: 01091-10...

Hammer Price: 🔒

PRESSES & FORMING

4-POST HYDRAULIC RUBBER BOX PRESS, 36" X 60" BED...

Hammer Price: 🔒

2003 FLOW WATERJET CUTTING MACHINE

METALWORKING & FABRICATION EQUIPMENT

2003 FLOW WATERJET CUTTING MACHINE, 6' X 12' TABLE, 60,000 PSI, FLOWMASTER VERSION 6 SOFTWARE, S/N N...

Hammer Price: 🔒

2008 KOMO VR512 MACHXTRM

WOODWORKING EQUIPMENT

2008 KOMO VR512 MACHXTRM CNC ROUTER S/N: 68621-08...

Hammer Price: 🔒

JANDA PMFD3-170-24RTDF

WELDING & CUTTING

JANDA PMFD3-170-24RTDF SPOT WELDER, 170 KVA, 36" THROAT, S/N: P-3604, W/ WELD COMPUTER CONTROLS...

Hammer Price: 🔒

2005 HAAS VF-4SSAPC

CNC MACHINE CENTERS

2005 HAAS VF-4SSAPC VERTICAL MACHINING CENTER, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ATC...

Hammer Price: 🔒

2006 HAAS VF-2D

CNC MACHINE CENTERS

2006 HAAS VF-2D VERTICAL MACHINING CENTER, VOP-B, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 24 ...

Hammer Price: 🔒

2005 HAAS VF-2D

CNC MACHINE CENTERS

2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 100...

Hammer Price: 🔒

2004 HAAS VF-4D

CNC MACHINE CENTERS

2004 HAAS VF-4D VERTICAL MACHINING CENTER, VOP-A, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE, 24 ...

Hammer Price: 🔒

2005 HAAS VF-2D

CNC MACHINE CENTERS

2005 HAAS VF-2D VERTICAL MACHINING CENTER, XYZ TRAVELS: 30" X 16" X 20", 36" X 14" TABLE, 20 HP, 100...

Hammer Price: 🔒

2002 HAAS VF-4 BAPC

CNC MACHINE CENTERS

2002 HAAS VF-4 BAPC VERTICAL MACHINING CENTER, VOP-D, XYZ TRAVELS: 50" X 20" X 25", 52" X 18" TABLE,...

Hammer Price: 🔒

MACHINE TECHNOLOGIES 24-6145

PRESSES & FORMING

MACHINE TECHNOLOGIES 4-POST HOT FORMING PRESS, 24" X 24" PLATENS, W/ OVEN S/N: 87-61701-1...

Hammer Price: 🔒

HAAS TR210H

CNC MACHINE CENTERS

HAAS TR210H 5-AXIS TRUNNION ROTARY TABLE S/N: 900869...

Hammer Price: 🔒

MISC

INDUSTRIAL WASH LINE SYSTEM...

Hammer Price: 🔒

1995 GREENERD HCA-50-60R8

PRESSES & FORMING

1995 GREENERD HCA-50-60R8 C-FRAME HYDRAULIC PRESS, 50 TON, S/N 95T5032...

Hammer Price: 🔒

MARCHANT

MISC

MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC...

Hammer Price: 🔒

MARCHANT 12A

MISC

MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 58...

Hammer Price: 🔒

2006 KOMO VR512

WOODWORKING EQUIPMENT

2006 KOMO VR512 CNC ROUTER MACHONE SHO S/N: 57952-06...

Hammer Price: 🔒

VIDEOJET 1510

COMMERCIAL PRINTING & BINDERY EQUIPMENT

VIDEOJET 1510 INKJET PRINTER...

Hammer Price: 🔒

MARCHANT 12A

MISC

MARCHANT 12A SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC, S/N: 378...

Hammer Price: 🔒

W. MILLER CO.

MISC

W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 15'-1"L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON...

Hammer Price: 🔒

HAIMER POWER CLAMP

MISC

HAIMER POWER CLAMP SHRINK FIT MACHINE...

Hammer Price: 🔒

W. MILLER CO.

MISC

W. MILLER CO. PAINT CURING OVEN, DIMENSIONS: 10'-6"W X 9'L X 9'-6"H, W/ ONE 400,000 BTU/HR MAXON CYC...

Hammer Price: 🔒

MARCHANT 6A

MISC

MARCHANT 6A SHRINKING & STRETCHING MACHINE, 6" THROAT, PNEUMATIC, S/N: 182...

Hammer Price: 🔒

SCIAKY SPT.2-30-75-36

WELDING & CUTTING

SCIAKY SPT.2-30-75-36 SPOT WELDER, 100 KVA, 3-PHASE, 36" THROAT, S/N: 8887, W/ III RESISTANCE WELDIN...

Hammer Price: 🔒

MARCHANT

MISC

MARCHANT SHRINKING & STRETCHING MACHINE, 12" THROAT, PNEUMATIC...

Hammer Price: 🔒

BRIDGEPORT/HARDINGE VERTICAL MILL

CNC MACHINE CENTERS

BRIDGEPORT/HARDINGE VERTICAL MILL W/ ACU-RITE 200S 2X M DRO, J-HEAD S/N HJ318479...

Hammer Price: 🔒

1 2 3 4 5 ... 23 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

HAAS VR11 VR9 VF9 VF7 VF5SS VF4SS VF3SS VF2SS 2 VERSON WHEELON PRESSES 2017 BAKER ANODIZING LINE HUFFORD A10 STRETCH FORMER

Save to Project Folder

Print Options

Save to Project Folder