The RBT Group Shop Closing Due to Real Estate Acquisition

Resell CNC

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 185

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 185 lots

Year	Make	Model	Lot Description	Hammer Price
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 3 HP, SPINDLE SPEED: 60 - 4,200 RPM, ACU-RITE MODEL CNC MPG2 DIGITAL READOUT, FRENIC - MEGA SERVO CONTROLLER, X & Y SERVO POWER FEED, POWER DRAWBAR, 6" TECO PWS 6900 MILLING VISE WITH HANDLE S/N: 209889 BRIDGEPORT · SERIES I	🔒 Subscribe
2007	HAAS	TM-2	2007 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 16", RAPID TRAVERSE: 200 IPM, CUTTING FEED RATE: 200 IPM, SPINDLE TAPER TYPE: CAT#40, MAX. SPINDLE SPEED: 4,000 RPM, SPINDLE MOTOR: 7.5 HP, SPINDLE NOSE TO TABLE TOP: 4-20", TOOL CAPACITY: 10, TOOL CHANGER TYPE: UMBRELLA, HAAS CNC CONTROL, RIGID TAPPING, UMBRELLA ATC WITH (7) TOOL HOLDERS, (2) 6" KURT VISES, RENISHAW S/N: 1056393 2007 · HAAS · TM-2	🔒 Subscribe
	SHARP	VERTICAL MILL	SHARP TAIWAN / MEEHANITE VERTICAL MILL, TABLE AREA: 10" X 50", LONGITUDINAL TRAVEL: 790 MM, CROSS TRAVEL: 390 MM, VERTICAL KNEE TRAVEL: 390 MM, SPINDLE SPEED: 60 - 4,500 RPM, SPINDLE TAPER: 40, ACU-RITE MODEL CNC MP - G2 DIGITAL READOUT, X & Y SERVO POWER FEED, POWER DRAW BAR S/N: 60900384 SHARP · VERTICAL MILL	🔒 Subscribe
	HARDINGE	HLVH	HARDINGE MODEL HLVH TOOL ROOM LATHE, CAPACITY: 10" X 20", MAX. SPINDLE SPEEDS: 125 - 3,000 RPM, POWER FEEDS, DRO MAGNETIC DIGITAL READOUT, ALORIS TOOL POST WITH (11) TOOL HOLDERS, VARIABLE CARRIAGE FEEDS, (2) RACKS OF COLLETS, COLLET CLOSER & COLLET CHUCK, 3-JAW CHUCK, GEOMETRIC DIE HEAD ON ALORIS TOOLHOLDER, COOLANT, WORK LIGHT S/N: 68671 HARDINGE · HLVH	🔒 Subscribe
2006	HAAS	TM-2	2006 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 16", RAPID TRAVERSE: 200 IPM, CUTTING FEED RATE: 200 IPM, SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 4,000 RPM, SPINDLE MOTOR: 7.5 HP, SPINDLE NOSE TO TABLE TOP: 4-20", TOOL CHANGER TYPE: UMBRELLA, HAAS CNC CONTROL, 6" KURT VISE S/N: 46505 2006 · HAAS · TM-2	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 RPM, DRO MAGNETIC DIGITAL READOUT, SERVO POWER LONGITUDINAL FEED, 6" KURT VISE WITH HANDLE, COLLET SET S/N: 252713 BRIDGEPORT · SERIES I	🔒 Subscribe
	HAAS	211081	8 INCH HAAS ROTARY TABLE WITH TAILSTOCK S/N: 211081 HAAS · 211081	🔒 Subscribe
	SHARP	LMV-50	SHARP MODEL LMV-50 VERTICAL MILL, TABLE AREA: 9" X 50", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,500 RPM, DRO MAGNETIC DIGITAL READOUT, POWER DRAW BAR, SERVO POWER LONGITUDINAL TRAVEL, ANGLE PLATE, 6" KURT VISE WITH ROTARY BASE S/N: 60930040 SHARP · LMV-50	🔒 Subscribe
2000	HAAS	VF-3	2000 HAAS VF-3 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 48" X 18", XYZ-AXIS TRAVELS: 40" X 20" X 25", RAPID TRAVERSE: 1,000 IPM, CUTTING FEED RATE: 650 IPM, SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 7,500 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE TO TABLE TOP: 4-29", TOOL CHANGER TYPE: UMBRELLA, TOOL CHANGE TIME: 4.2 SEC., CHIP-TO-CHIP TIME: 5 SEC., HAAS CNC CONTROL, (2) 6" KURT VISES, PROGRAMMABLE COOLANT NOZZLE, UMBRELLA ATC WITH (6) TOOLHOLDERS S/N: 20412 2000 · HAAS · VF-3	🔒 Subscribe
	CAT	40 TAPER	ASSORTMENT OF APPROX. (50) CAT40 TAPER TOOLHOLDERS ON ROLLING TOOL CART - COLLETS - TOOL STAND - (54) TOOLHOLDERS CAT · 40 TAPER	🔒 Subscribe
			METALS INVENTORY INCLUDING ALUMINUM SLABS	🔒 Subscribe
	CLAUSING COLCHESTER	MT40SILFV/17135	17 INCH X 42 INCH CLAUSING COLCHESTER ENGINE LATHE, SWING OVER CROSS SLIDE: 10-1/2 INCH, HOLE THRU SPINDLE: 2-3/4 INCH, MAX. SPINDLE SPEEDS: 20 - 1,600 RPM, DRO MAGNETIC DIGITAL READOUT, 12 INCH 3-JAW CHUCK, ALORIS TOOL POST, WORK LIGHT S/N: MT40SILFV/17135 CLAUSING COLCHESTER · MT40SILFV/17135	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE SIZE: 9 X 48 INCH, MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 RPM, SONY MAGNE SCALE LH10 DIGITAL READOUT, POWER DRAW BAR, BRIDGEPORT POWER LONGITUDINAL FEED, 6 INCH KURT VISE WITH HANDLE S/N: 256207 BRIDGEPORT · SERIES I	🔒 Subscribe
			ASSORTMENT OF APPROX. (30) CAT40 TAPER TOOLHOLDERS ON ROLLING SHOP CART - C-CLAMPS - (30) TOOLHOLDERS	🔒 Subscribe
	CLAUSING METOSA	17" X 64"	17" X 64" CLAUSING METOSA GAP BED ENGINE LATHE, SWING OVER CROSS SLIDE: 8", SWING: 24", GAP: 10", HOLE THRU SPINDLE: 2", MAX. SPINDLE SPEEDS: 0 - 2,300 RPM, DRO MAGNETIC DIGITAL READOUT, 9" 3-JAW CHUCK, JACOBS COLLET CHUCK, ALORIS TOOL POST WITH (4) TOOL HOLDERS, INCH, METRIC, DP & MODULE THREADING, (2) DRILL CHUCKS S/N: 31313 CLAUSING METOSA · 17" X 64"	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
			METALS INVENTORY ON WALL, ALUMINUM & STEEL	🔒 Subscribe
	BLACK DIAMOND	BW-90	BLACK DIAMOND BW-90 DRILL GRINDER S/N: Z6624 WITH COLLETS IN DRAWERS & STAND BLACK DIAMOND · BW-90	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
	SOUTHWESTERN TRAK	TRL1840 CSS	SOUTHWESTERN TRAK MODEL TRL1840 CSS CNC LATHE, MAX. CENTER DISTANCE: 40.2 INCH, SWING OVER BED: 18-1/2 INCH, SWING OVER CROSS SLIDE: 9 INCH, HOLE THRU SPINDLE: 1-1/4 INCH, (3) RANGE SPINDLE SPEEDS: 50 - 270 RPM, 150 - 850 RPM, 450 - 2,500 RPM, SPINDLE MOTOR: 10 HP, CONSTANT SURFACE SPEED, PROTO TRAK MODEL LX3 DIGITAL READOUT, 10 INCH 6-JAW CHUCK, DORIAN TOOL POST WITH (10) TOOLHOLDERS, TAILSTOCK, DRILL CHUCK & LIVE CENTER, COOLANT S/N: 99-1854 SOUTHWESTERN TRAK · TRL1840 CSS	🔒 Subscribe
	MITUTOYO	B231	MITUTOYO MODEL B231 CMM, BLACK GRANITE PLATE: 43-1/2" X 50-1/2", MEASURING RANGE: 28" X 24" X 18", RENISHAW MODEL PH8 PROBE HEAD, TP/2 PROBE, END MEASURING SET, GARNET PROBES, QUADRA CHEK COMPUTER, HP PRINTER, BALL SHERE S/N: 88051513 002106102 MITUTOYO · B231	🔒 Subscribe
	ALORIS		HUGE ASSORTMENT OF ALORIS TOOLHOLDERS ON SHOP SHELF ALORIS	🔒 Subscribe
	ALORIS		ASSORTMENT OF ALORIS TOOLHOLDERS, LIVE & DEAD CENTERS, AND CARBIDE INSERTED BORING BARS ALORIS	🔒 Subscribe
	VIDMAR	12-DRAWER ROLLER BEARING TOOL CABINET	12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS, FORM RELIEF ATTACHMENT, REAMERS, KEYSEAT CUTTERS, TAPS, COTTER PINS, NUTS & FASTENER INVENTORY VIDMAR · 12-DRAWER ROLLER BEARING TOOL CABINET	🔒 Subscribe
			HUGE ASSORTMENT OF HARDWARE INVENTORY & STORAGE BINS - NUTS - DOWEL PINS - SCREWS & BOLTS - SPRINGS - O-RING KITS - (3) DRILL INDEXES - ALL WITH CONTENTS	🔒 Subscribe
	VIDMAR	12-DRAWER ROLLER BEARING TOOL CABINET	12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - FASTENERS - DOWEL PINS - TAPS - SOCKET HEAD CAP SCREWS VIDMAR · 12-DRAWER ROLLER BEARING TOOL CABINET	🔒 Subscribe
			SHOP CABINET WITH APPROX. (55) CAT40 TOOLHOLDERS AND CNC TOOLING - (58) CAT 40 TAPER TOOLHOLDERS	🔒 Subscribe
	SUNNEN	MBB-1600	SUNNEN MBB-1600 HORIZONTAL HONE, BACK OF SPINDLE MANDRELS, STONES INVENTORY S/N: 42881 SUNNEN · MBB-1600	🔒 Subscribe
	VIDMAR		14-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - END MILLS - COUNTERBORES - ALLEN KEYS VIDMAR	🔒 Subscribe
	CENTRAL HYDRAULICS	96188	50 TON CENTRAL HYDRAULICS HYDRAULIC SHOP PRESS, MODEL 96188 CENTRAL HYDRAULICS · 96188	🔒 Subscribe
			WORKBENCH WITH ALL CONTENTS - MORSE TAPER DRILLS - STEADY REST - 4-JAW CHUCK - WILTON VISE	🔒 Subscribe
			ALUMINUM STOCK ON SHELF	🔒 Subscribe
	DOALL	ML	16 INCH DOALL MODEL ML VERTICAL BANDSAW, TABLE AREA: 24 INCH X 2 FT, BLADE GRINDER / WELDER, WORK LIGHT DOALL · ML	🔒 Subscribe
	ACCU-FINISH	SERIES II	ACCU-FINISH SERIES II GRINDING & FINISHING MACHINE, WORK LIGHT S/N: AB29703 ACCU-FINISH · SERIES II	🔒 Subscribe
			BLUEPRINT FILE CABINET - SHELVING ON BACK WALL WITH CONTENTS	🔒 Subscribe
			SHOP CABINET WITH TOOLING LARGE PERISHABLE TOOLING INVENTORY	🔒 Subscribe
	KENNEDY	ROLLING TOOL CHEST	KENNEDY ROLLING TOOL CHEST WITH ALL CONTENTS KENNEDY · ROLLING TOOL CHEST	🔒 Subscribe
			WOODEN CABINETS & DRAWERED STORAGE UNIT WITH ALL CONTENTS - HELICOIL INVENTORY - NUMBER & LETTER STAMPS - MILWAUKEE HAWG ARBOR - R-8 TOOL HOLDERS - DRILLS & (2) BORE GAGES - PERISHABLE TOOLING - DIES & TAP / DIE WRENCHES	🔒 Subscribe
			(2) 9 INCH X 16 INCH ANGLE PLATES, 12 INCH X 12 INCH DRILLED & TAPPED PLATE, AND BOX OF ALLEN KEYS	🔒 Subscribe
			WORKBENCH WITH LARGE ASSORTMENT OF VISES	🔒 Subscribe
	WILTON		WORKBENCH WITH (2) WILTON VISES, BOEHM ELECTRIC TURNING MACHINE, MISCELLANEOUS SHOP ITEMS WILTON	🔒 Subscribe
	MOORE	DIAFORM	MOORE DIAFORM WHEEL DRESSER MOORE · DIAFORM	🔒 Subscribe
	MOORE	DIAFORM	MOORE DIAFORM WHEEL DRESSER MOORE · DIAFORM	🔒 Subscribe
	MARENA	GAGE PIN SETS	MARENA GAGE PIN SETS .751 TO 1.000 INCH MARENA · GAGE PIN SETS	🔒 Subscribe
	KURT		(4) 6 INCH KURT VISES ON ELEVATING SHOP CART - (2) SPEED HANDLES - (2) HANDLES KURT	🔒 Subscribe
1995	HAAS	VF-6	1995 HAAS VF-6 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 64" X 28", XYZ-AXIS TRAVELS: 64" X 32" X 30", SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 7,500 RPM, SPINDLE MOTOR: 15 HP, HAAS CNC CONTROL, 8" MILLING VISE, UMBRELLA ATC WITH (8) TOOLHOLDERS, PROGRAMMABLE COOLANT NOZZLE S/N: 5016 1995 · HAAS · VF-6	🔒 Subscribe
			LARGE ASSORTMENT OF DRILL INDEXES - DRILLS INVENTORY - ROLLING SHOP CART	🔒 Subscribe
	NORTON	UNIVERSAL CYLINDRICAL GRINDER	12" X 40" NORTON UNIVERSAL CYLINDRICAL GRINDER, 14" WHEEL DIAMETER, 5 HP WORK HEAD, COOLANT, LEVER ACTIVATED TAILSTOCK S/N: 1854 NORTON · UNIVERSAL CYLINDRICAL GRINDER	🔒 Subscribe
	BROWN & SHARPE	MICROMASTER	8" X 24" BROWN & SHARPE MICROMASTER HORIZONTAL SPINDLE SURFACE GRINDER, 6" X 24" WALKER CERAMAX MAGNETIC CHUCK, ENGIS DIAFORM WHEEL DRESSER S/N: 523-824-530 BROWN & SHARPE · MICROMASTER	🔒 Subscribe

Year	Make	Model	Description	Price
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 3 HP, SPINDLE SPEED: 60 - 4,200 RPM, ACU-RITE MODEL CNC MPG2 DIGITAL READOUT, FRENIC - MEGA SERVO CONTROLLER, X & Y SERVO POWER FEED, POWER DRAWBAR, 6" TECO PWS 6900 MILLING VISE WITH HANDLE S/N: 209889	🔒 Subscribe
2007	HAAS	TM-2	2007 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 16", RAPID TRAVERSE: 200 IPM, CUTTING FEED RATE: 200 IPM, SPINDLE TAPER TYPE: CAT#40, MAX. SPINDLE SPEED: 4,000 RPM, SPINDLE MOTOR: 7.5 HP, SPINDLE NOSE TO TABLE TOP: 4-20", TOOL CAPACITY: 10, TOOL CHANGER TYPE: UMBRELLA, HAAS CNC CONTROL, RIGID TAPPING, UMBRELLA ATC WITH (7) TOOL HOLDERS, (2) 6" KURT VISES, RENISHAW S/N: 1056393	🔒 Subscribe
	SHARP	VERTICAL MILL	SHARP TAIWAN / MEEHANITE VERTICAL MILL, TABLE AREA: 10" X 50", LONGITUDINAL TRAVEL: 790 MM, CROSS TRAVEL: 390 MM, VERTICAL KNEE TRAVEL: 390 MM, SPINDLE SPEED: 60 - 4,500 RPM, SPINDLE TAPER: 40, ACU-RITE MODEL CNC MP - G2 DIGITAL READOUT, X & Y SERVO POWER FEED, POWER DRAW BAR S/N: 60900384	🔒 Subscribe
	HARDINGE	HLVH	HARDINGE MODEL HLVH TOOL ROOM LATHE, CAPACITY: 10" X 20", MAX. SPINDLE SPEEDS: 125 - 3,000 RPM, POWER FEEDS, DRO MAGNETIC DIGITAL READOUT, ALORIS TOOL POST WITH (11) TOOL HOLDERS, VARIABLE CARRIAGE FEEDS, (2) RACKS OF COLLETS, COLLET CLOSER & COLLET CHUCK, 3-JAW CHUCK, GEOMETRIC DIE HEAD ON ALORIS TOOLHOLDER, COOLANT, WORK LIGHT S/N: 68671	🔒 Subscribe
2006	HAAS	TM-2	2006 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 16", RAPID TRAVERSE: 200 IPM, CUTTING FEED RATE: 200 IPM, SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 4,000 RPM, SPINDLE MOTOR: 7.5 HP, SPINDLE NOSE TO TABLE TOP: 4-20", TOOL CHANGER TYPE: UMBRELLA, HAAS CNC CONTROL, 6" KURT VISE S/N: 46505	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 RPM, DRO MAGNETIC DIGITAL READOUT, SERVO POWER LONGITUDINAL FEED, 6" KURT VISE WITH HANDLE, COLLET SET S/N: 252713	🔒 Subscribe
	HAAS	211081	8 INCH HAAS ROTARY TABLE WITH TAILSTOCK S/N: 211081	🔒 Subscribe
	SHARP	LMV-50	SHARP MODEL LMV-50 VERTICAL MILL, TABLE AREA: 9" X 50", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,500 RPM, DRO MAGNETIC DIGITAL READOUT, POWER DRAW BAR, SERVO POWER LONGITUDINAL TRAVEL, ANGLE PLATE, 6" KURT VISE WITH ROTARY BASE S/N: 60930040	🔒 Subscribe
2000	HAAS	VF-3	2000 HAAS VF-3 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 48" X 18", XYZ-AXIS TRAVELS: 40" X 20" X 25", RAPID TRAVERSE: 1,000 IPM, CUTTING FEED RATE: 650 IPM, SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 7,500 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE TO TABLE TOP: 4-29", TOOL CHANGER TYPE: UMBRELLA, TOOL CHANGE TIME: 4.2 SEC., CHIP-TO-CHIP TIME: 5 SEC., HAAS CNC CONTROL, (2) 6" KURT VISES, PROGRAMMABLE COOLANT NOZZLE, UMBRELLA ATC WITH (6) TOOLHOLDERS S/N: 20412	🔒 Subscribe
	CAT	40 TAPER	ASSORTMENT OF APPROX. (50) CAT40 TAPER TOOLHOLDERS ON ROLLING TOOL CART - COLLETS - TOOL STAND - (54) TOOLHOLDERS	🔒 Subscribe
			METALS INVENTORY INCLUDING ALUMINUM SLABS	🔒 Subscribe
	CLAUSING COLCHESTER	MT40SILFV/17135	17 INCH X 42 INCH CLAUSING COLCHESTER ENGINE LATHE, SWING OVER CROSS SLIDE: 10-1/2 INCH, HOLE THRU SPINDLE: 2-3/4 INCH, MAX. SPINDLE SPEEDS: 20 - 1,600 RPM, DRO MAGNETIC DIGITAL READOUT, 12 INCH 3-JAW CHUCK, ALORIS TOOL POST, WORK LIGHT S/N: MT40SILFV/17135	🔒 Subscribe
	BRIDGEPORT	SERIES I	BRIDGEPORT SERIES I VERTICAL MILL, TABLE SIZE: 9 X 48 INCH, MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 RPM, SONY MAGNE SCALE LH10 DIGITAL READOUT, POWER DRAW BAR, BRIDGEPORT POWER LONGITUDINAL FEED, 6 INCH KURT VISE WITH HANDLE S/N: 256207	🔒 Subscribe
			ASSORTMENT OF APPROX. (30) CAT40 TAPER TOOLHOLDERS ON ROLLING SHOP CART - C-CLAMPS - (30) TOOLHOLDERS	🔒 Subscribe
	CLAUSING METOSA	17" X 64"	17" X 64" CLAUSING METOSA GAP BED ENGINE LATHE, SWING OVER CROSS SLIDE: 8", SWING: 24", GAP: 10", HOLE THRU SPINDLE: 2", MAX. SPINDLE SPEEDS: 0 - 2,300 RPM, DRO MAGNETIC DIGITAL READOUT, 9" 3-JAW CHUCK, JACOBS COLLET CHUCK, ALORIS TOOL POST WITH (4) TOOL HOLDERS, INCH, METRIC, DP & MODULE THREADING, (2) DRILL CHUCKS S/N: 31313	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
			METALS INVENTORY ON WALL, ALUMINUM & STEEL	🔒 Subscribe
	BLACK DIAMOND	BW-90	BLACK DIAMOND BW-90 DRILL GRINDER S/N: Z6624 WITH COLLETS IN DRAWERS & STAND	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
			CANTILEVER RACK WITH METALS INVENTORY	🔒 Subscribe
	SOUTHWESTERN TRAK	TRL1840 CSS	SOUTHWESTERN TRAK MODEL TRL1840 CSS CNC LATHE, MAX. CENTER DISTANCE: 40.2 INCH, SWING OVER BED: 18-1/2 INCH, SWING OVER CROSS SLIDE: 9 INCH, HOLE THRU SPINDLE: 1-1/4 INCH, (3) RANGE SPINDLE SPEEDS: 50 - 270 RPM, 150 - 850 RPM, 450 - 2,500 RPM, SPINDLE MOTOR: 10 HP, CONSTANT SURFACE SPEED, PROTO TRAK MODEL LX3 DIGITAL READOUT, 10 INCH 6-JAW CHUCK, DORIAN TOOL POST WITH (10) TOOLHOLDERS, TAILSTOCK, DRILL CHUCK & LIVE CENTER, COOLANT S/N: 99-1854	🔒 Subscribe
	MITUTOYO	B231	MITUTOYO MODEL B231 CMM, BLACK GRANITE PLATE: 43-1/2" X 50-1/2", MEASURING RANGE: 28" X 24" X 18", RENISHAW MODEL PH8 PROBE HEAD, TP/2 PROBE, END MEASURING SET, GARNET PROBES, QUADRA CHEK COMPUTER, HP PRINTER, BALL SHERE S/N: 88051513 002106102	🔒 Subscribe
	ALORIS		HUGE ASSORTMENT OF ALORIS TOOLHOLDERS ON SHOP SHELF	🔒 Subscribe
	ALORIS		ASSORTMENT OF ALORIS TOOLHOLDERS, LIVE & DEAD CENTERS, AND CARBIDE INSERTED BORING BARS	🔒 Subscribe
	VIDMAR	12-DRAWER ROLLER BEARING TOOL CABINET	12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS, FORM RELIEF ATTACHMENT, REAMERS, KEYSEAT CUTTERS, TAPS, COTTER PINS, NUTS & FASTENER INVENTORY	🔒 Subscribe
			HUGE ASSORTMENT OF HARDWARE INVENTORY & STORAGE BINS - NUTS - DOWEL PINS - SCREWS & BOLTS - SPRINGS - O-RING KITS - (3) DRILL INDEXES - ALL WITH CONTENTS	🔒 Subscribe
	VIDMAR	12-DRAWER ROLLER BEARING TOOL CABINET	12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - FASTENERS - DOWEL PINS - TAPS - SOCKET HEAD CAP SCREWS	🔒 Subscribe
			SHOP CABINET WITH APPROX. (55) CAT40 TOOLHOLDERS AND CNC TOOLING - (58) CAT 40 TAPER TOOLHOLDERS	🔒 Subscribe
	SUNNEN	MBB-1600	SUNNEN MBB-1600 HORIZONTAL HONE, BACK OF SPINDLE MANDRELS, STONES INVENTORY S/N: 42881	🔒 Subscribe
	VIDMAR		14-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - END MILLS - COUNTERBORES - ALLEN KEYS	🔒 Subscribe
	CENTRAL HYDRAULICS	96188	50 TON CENTRAL HYDRAULICS HYDRAULIC SHOP PRESS, MODEL 96188	🔒 Subscribe
			WORKBENCH WITH ALL CONTENTS - MORSE TAPER DRILLS - STEADY REST - 4-JAW CHUCK - WILTON VISE	🔒 Subscribe
			ALUMINUM STOCK ON SHELF	🔒 Subscribe
	DOALL	ML	16 INCH DOALL MODEL ML VERTICAL BANDSAW, TABLE AREA: 24 INCH X 2 FT, BLADE GRINDER / WELDER, WORK LIGHT	🔒 Subscribe
	ACCU-FINISH	SERIES II	ACCU-FINISH SERIES II GRINDING & FINISHING MACHINE, WORK LIGHT S/N: AB29703	🔒 Subscribe
			BLUEPRINT FILE CABINET - SHELVING ON BACK WALL WITH CONTENTS	🔒 Subscribe
			SHOP CABINET WITH TOOLING LARGE PERISHABLE TOOLING INVENTORY	🔒 Subscribe
	KENNEDY	ROLLING TOOL CHEST	KENNEDY ROLLING TOOL CHEST WITH ALL CONTENTS	🔒 Subscribe
			WOODEN CABINETS & DRAWERED STORAGE UNIT WITH ALL CONTENTS - HELICOIL INVENTORY - NUMBER & LETTER STAMPS - MILWAUKEE HAWG ARBOR - R-8 TOOL HOLDERS - DRILLS & (2) BORE GAGES - PERISHABLE TOOLING - DIES & TAP / DIE WRENCHES	🔒 Subscribe
			(2) 9 INCH X 16 INCH ANGLE PLATES, 12 INCH X 12 INCH DRILLED & TAPPED PLATE, AND BOX OF ALLEN KEYS	🔒 Subscribe
			WORKBENCH WITH LARGE ASSORTMENT OF VISES	🔒 Subscribe
	WILTON		WORKBENCH WITH (2) WILTON VISES, BOEHM ELECTRIC TURNING MACHINE, MISCELLANEOUS SHOP ITEMS	🔒 Subscribe
	MOORE	DIAFORM	MOORE DIAFORM WHEEL DRESSER	🔒 Subscribe
	MOORE	DIAFORM	MOORE DIAFORM WHEEL DRESSER	🔒 Subscribe
	MARENA	GAGE PIN SETS	MARENA GAGE PIN SETS .751 TO 1.000 INCH	🔒 Subscribe
	KURT		(4) 6 INCH KURT VISES ON ELEVATING SHOP CART - (2) SPEED HANDLES - (2) HANDLES	🔒 Subscribe
1995	HAAS	VF-6	1995 HAAS VF-6 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 64" X 28", XYZ-AXIS TRAVELS: 64" X 32" X 30", SPINDLE TAPER TYPE: CAT#40, SPINDLE SPEED: 7,500 RPM, SPINDLE MOTOR: 15 HP, HAAS CNC CONTROL, 8" MILLING VISE, UMBRELLA ATC WITH (8) TOOLHOLDERS, PROGRAMMABLE COOLANT NOZZLE S/N: 5016	🔒 Subscribe
			LARGE ASSORTMENT OF DRILL INDEXES - DRILLS INVENTORY - ROLLING SHOP CART	🔒 Subscribe
	NORTON	UNIVERSAL CYLINDRICAL GRINDER	12" X 40" NORTON UNIVERSAL CYLINDRICAL GRINDER, 14" WHEEL DIAMETER, 5 HP WORK HEAD, COOLANT, LEVER ACTIVATED TAILSTOCK S/N: 1854	🔒 Subscribe
	BROWN & SHARPE	MICROMASTER	8" X 24" BROWN & SHARPE MICROMASTER HORIZONTAL SPINDLE SURFACE GRINDER, 6" X 24" WALKER CERAMAX MAGNETIC CHUCK, ENGIS DIAFORM WHEEL DRESSER S/N: 523-824-530	🔒 Subscribe

BRIDGEPORT SERIES I

METALWORKING & FABRICATION EQUIPMENT

BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 3 HP, SPINDLE SPEED: 60 - 4,200 RPM,...

Hammer Price: 🔒

2007 HAAS TM-2

CNC MACHINE CENTERS

2007 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 1...

Hammer Price: 🔒

SHARP VERTICAL MILL

METALWORKING & FABRICATION EQUIPMENT

SHARP TAIWAN / MEEHANITE VERTICAL MILL, TABLE AREA: 10" X 50", LONGITUDINAL TRAVEL: 790 MM, CROSS TR...

Hammer Price: 🔒

HARDINGE HLVH

METALWORKING & FABRICATION EQUIPMENT

HARDINGE MODEL HLVH TOOL ROOM LATHE, CAPACITY: 10" X 20", MAX. SPINDLE SPEEDS: 125 - 3,000 RPM, POWE...

Hammer Price: 🔒

2006 HAAS TM-2

CNC MACHINE CENTERS

2006 HAAS TM-2 CNC TOOLROOM MILL, TABLE/PALLET SIZE: 57.75" X 10.5", XYZ-AXIS TRAVELS: 40" X 16" X 1...

Hammer Price: 🔒

BRIDGEPORT SERIES I

METALWORKING & FABRICATION EQUIPMENT

BRIDGEPORT SERIES I VERTICAL MILL, TABLE AREA: 9" X 42", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 RPM,...

Hammer Price: 🔒

HAAS 211081

METALWORKING & FABRICATION EQUIPMENT

8 INCH HAAS ROTARY TABLE WITH TAILSTOCK S/N: 211081...

Hammer Price: 🔒

SHARP LMV-50

METALWORKING & FABRICATION EQUIPMENT

SHARP MODEL LMV-50 VERTICAL MILL, TABLE AREA: 9" X 50", MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,500 RPM, ...

Hammer Price: 🔒

2000 HAAS VF-3

CNC MACHINE CENTERS

2000 HAAS VF-3 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 48" X 18", XYZ-AXIS TRAVELS: 40" X ...

Hammer Price: 🔒

CAT 40 TAPER

METALWORKING & FABRICATION EQUIPMENT

ASSORTMENT OF APPROX. (50) CAT40 TAPER TOOLHOLDERS ON ROLLING TOOL CART - COLLETS - TOOL STAND - (54...

Hammer Price: 🔒

MISC

METALS INVENTORY INCLUDING ALUMINUM SLABS...

Hammer Price: 🔒

CLAUSING COLCHESTER MT40SILFV/17135

METALWORKING & FABRICATION EQUIPMENT

17 INCH X 42 INCH CLAUSING COLCHESTER ENGINE LATHE, SWING OVER CROSS SLIDE: 10-1/2 INCH, HOLE THRU S...

Hammer Price: 🔒

BRIDGEPORT SERIES I

METALWORKING & FABRICATION EQUIPMENT

BRIDGEPORT SERIES I VERTICAL MILL, TABLE SIZE: 9 X 48 INCH, MOTOR: 2 HP, MAX. SPINDLE SPEED: 4,200 R...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

ASSORTMENT OF APPROX. (30) CAT40 TAPER TOOLHOLDERS ON ROLLING SHOP CART - C-CLAMPS - (30) TOOLHOLDER...

Hammer Price: 🔒

CLAUSING METOSA 17" X 64"

METALWORKING & FABRICATION EQUIPMENT

17" X 64" CLAUSING METOSA GAP BED ENGINE LATHE, SWING OVER CROSS SLIDE: 8", SWING: 24", GAP: 10", HO...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CANTILEVER RACK WITH METALS INVENTORY...

Hammer Price: 🔒

MISC

METALS INVENTORY ON WALL, ALUMINUM & STEEL...

Hammer Price: 🔒

BLACK DIAMOND BW-90

METALWORKING & FABRICATION EQUIPMENT

BLACK DIAMOND BW-90 DRILL GRINDER S/N: Z6624 WITH COLLETS IN DRAWERS & STAND...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CANTILEVER RACK WITH METALS INVENTORY...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CANTILEVER RACK WITH METALS INVENTORY...

Hammer Price: 🔒

SOUTHWESTERN TRAK TRL1840 CSS

CNC MACHINE CENTERS

SOUTHWESTERN TRAK MODEL TRL1840 CSS CNC LATHE, MAX. CENTER DISTANCE: 40.2 INCH, SWING OVER BED: 18-1...

Hammer Price: 🔒

MITUTOYO B231

TEST, MEASUREMENT & QUALITY EQUIPMENT

MITUTOYO MODEL B231 CMM, BLACK GRANITE PLATE: 43-1/2" X 50-1/2", MEASURING RANGE: 28" X 24" X 18", R...

Hammer Price: 🔒

ALORIS

METALWORKING & FABRICATION EQUIPMENT

HUGE ASSORTMENT OF ALORIS TOOLHOLDERS ON SHOP SHELF...

Hammer Price: 🔒

ALORIS

METALWORKING & FABRICATION EQUIPMENT

ASSORTMENT OF ALORIS TOOLHOLDERS, LIVE & DEAD CENTERS, AND CARBIDE INSERTED BORING BARS...

Hammer Price: 🔒

VIDMAR 12-DRAWER ROLLER BEARING TOOL CABINET

METALWORKING & FABRICATION EQUIPMENT

12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS, FORM RELIEF ATTACHMENT, REAMERS, KEYSEAT...

Hammer Price: 🔒

MISC

HUGE ASSORTMENT OF HARDWARE INVENTORY & STORAGE BINS - NUTS - DOWEL PINS - SCREWS & BOLTS - SPRINGS ...

Hammer Price: 🔒

VIDMAR 12-DRAWER ROLLER BEARING TOOL CABINET

METALWORKING & FABRICATION EQUIPMENT

12-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - FASTENERS - DOWEL PINS - TAPS - SOCKET ...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

SHOP CABINET WITH APPROX. (55) CAT40 TOOLHOLDERS AND CNC TOOLING - (58) CAT 40 TAPER TOOLHOLDERS...

Hammer Price: 🔒

SUNNEN MBB-1600

METALWORKING & FABRICATION EQUIPMENT

SUNNEN MBB-1600 HORIZONTAL HONE, BACK OF SPINDLE MANDRELS, STONES INVENTORY S/N: 42881...

Hammer Price: 🔒

VIDMAR

METALWORKING & FABRICATION EQUIPMENT

14-DRAWER VIDMAR ROLLER BEARING TOOL CABINET WITH CONTENTS - END MILLS - COUNTERBORES - ALLEN KEYS...

Hammer Price: 🔒

CENTRAL HYDRAULICS 96188

PRESSES & FORMING

50 TON CENTRAL HYDRAULICS HYDRAULIC SHOP PRESS, MODEL 96188...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WORKBENCH WITH ALL CONTENTS - MORSE TAPER DRILLS - STEADY REST - 4-JAW CHUCK - WILTON VISE...

Hammer Price: 🔒

MISC

ALUMINUM STOCK ON SHELF...

Hammer Price: 🔒

DOALL ML

METALWORKING & FABRICATION EQUIPMENT

16 INCH DOALL MODEL ML VERTICAL BANDSAW, TABLE AREA: 24 INCH X 2 FT, BLADE GRINDER / WELDER, WORK LI...

Hammer Price: 🔒

ACCU-FINISH SERIES II

SURFACE FINISHING EQUIPMENT

ACCU-FINISH SERIES II GRINDING & FINISHING MACHINE, WORK LIGHT S/N: AB29703...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

BLUEPRINT FILE CABINET - SHELVING ON BACK WALL WITH CONTENTS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

SHOP CABINET WITH TOOLING LARGE PERISHABLE TOOLING INVENTORY...

Hammer Price: 🔒

KENNEDY ROLLING TOOL CHEST

POWER AND HAND TOOLS

KENNEDY ROLLING TOOL CHEST WITH ALL CONTENTS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WOODEN CABINETS & DRAWERED STORAGE UNIT WITH ALL CONTENTS - HELICOIL INVENTORY - NUMBER & LETTER STA...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

(2) 9 INCH X 16 INCH ANGLE PLATES, 12 INCH X 12 INCH DRILLED & TAPPED PLATE, AND BOX OF ALLEN KEYS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

WORKBENCH WITH LARGE ASSORTMENT OF VISES...

Hammer Price: 🔒

WILTON

METALWORKING & FABRICATION EQUIPMENT

WORKBENCH WITH (2) WILTON VISES, BOEHM ELECTRIC TURNING MACHINE, MISCELLANEOUS SHOP ITEMS...

Hammer Price: 🔒

MOORE DIAFORM

METALWORKING & FABRICATION EQUIPMENT

MOORE DIAFORM WHEEL DRESSER...

Hammer Price: 🔒

MOORE DIAFORM

METALWORKING & FABRICATION EQUIPMENT

MOORE DIAFORM WHEEL DRESSER...

Hammer Price: 🔒

MARENA GAGE PIN SETS

METALWORKING & FABRICATION EQUIPMENT

MARENA GAGE PIN SETS .751 TO 1.000 INCH...

Hammer Price: 🔒

KURT

METALWORKING & FABRICATION EQUIPMENT

(4) 6 INCH KURT VISES ON ELEVATING SHOP CART - (2) SPEED HANDLES - (2) HANDLES...

Hammer Price: 🔒

1995 HAAS VF-6

CNC MACHINE CENTERS

1995 HAAS VF-6 CNC VERTICAL MACHINING CENTER, TABLE/PALLET SIZE: 64" X 28", XYZ-AXIS TRAVELS: 64" X ...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

LARGE ASSORTMENT OF DRILL INDEXES - DRILLS INVENTORY - ROLLING SHOP CART...

Hammer Price: 🔒

NORTON UNIVERSAL CYLINDRICAL GRINDER

METALWORKING & FABRICATION EQUIPMENT

12" X 40" NORTON UNIVERSAL CYLINDRICAL GRINDER, 14" WHEEL DIAMETER, 5 HP WORK HEAD, COOLANT, LEVER A...

Hammer Price: 🔒

BROWN & SHARPE MICROMASTER

METALWORKING & FABRICATION EQUIPMENT

8" X 24" BROWN & SHARPE MICROMASTER HORIZONTAL SPINDLE SURFACE GRINDER, 6" X 24" WALKER CERAMAX MAGN...

Hammer Price: 🔒

1 2 3 4 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

The RBT Group Shop Closing Due to Real Estate Acquisition

Save to Project Folder

Print Options

Save to Project Folder