Excess Moen Plating Equipment More

PLATER RACK CARTS (HOLDS 30 RACKS EACH)

POWDER COAT RACK CARTS (HOLDS 30 RACKS EACH)

POWDER COAT RACK CARTS (HOLDS 30 RACKS EACH)

2012 CONTROL MICRO SYSTEMS CMS-1020-IPG-S CNC LASER ETCHING SYSTEM W/ ENCLOSURE S/N: 11072. SYSTEM HAS THE ABILITY TO REMOVE AN ADDED LAYER, SUCH AS PAINT, FROM METAL SURFACE - REVEALING THE UNAFFECTED METAL BELOW. ALSO, HAS THE ABILITY TO OXIDIZE THE SURFACE THAT RESULTS IN A CHANGE IN APPEARANCE WITHOUT RAISED OR LOWERED AREAS.

ASSORTED GLASS PIPETTES, W/ STAINLESS STEEL & POLY-PLASTIC STANDS

DESPATCH PSC3-80S ANNEALING / MOLDING OVEN, ELECTRIC, TEMP. RANGE 200 TO 500-DEG. F, HEATER CAP. 204 KW, W/ ALLEN-BRADLEY PANELVIEW PLUS 1250 PLC CONTROLS AND ALL OTHER RELATED CONTROLS. DESIGNED FOR STRESS RELIEF OF METALS AND PLASTIC COMPONENTS. ALSO, CURING OF COATINGS. S/N: 144804

NORDSON COLORMAX POWDER SPRAY BOOTH, NORDSON SPECTRUM II POWDER FEED CENTER, ALL RELATED NORDSON CONTROLS, ENDLESS OVERHEAD CONVEYOR, WASH TUNNEL, GAS DRYING OVEN. THIS APPLICATION METHOD USES A SPRAY GUN, WHICH APPLIES AN ELECTROSTATIC CHARGE TO THE POWDER PARTICLES, WHICH ARE THEN ATTRACTED TO THE GROUNDED PART. AFTER APPLICATION OF THE POWDER COATING, THE PARTS ENTER A CURING OVEN WHERE, WITH THE ADDITION OF HEAT...

ELECTRO STRIP POWDER COAT STRIP LINE, STAINLESS STEEL, STRIP TANK PROCESS CONTROLS ARE ALLEN-BRADLEY PANELVIEW 1000 PLC CONTROLS, PROCESS UTILIZES ELECTRICAL CURRENT AND CHEMISTRY TO REMOVE POWDER FROM PROCESS RACKS.

STRIP LINE - SEMI-AUTOMATIC RACK LINE USED FOR THE PURPOSE OF ELECTROLYTIC METAL REMOVAL OFF OF PLATING RACK TIPS. VARIOUS TANK CONSTRUCTION. POLY/STEEL/FIBERGLASS. IN LINE DRYER.

ROOF-MOUNTED SCRUBBER KCH ENGINEERED SYSTEMS MODEL: H-200 3D. AN EXHAUST FAN FORCES OR INDUCES THE POLLUTED GAS STREAM THROUGH CORROSION RESISTANT DUCTWORK AND INTO THE WET SCRUBBER VESSEL, WHERE IT ENCOUNTERS LIQUID TO GAS CONTACT FROM THE SCRUBBING SOLUTION AND PACKING MEDIA WITH HIGH SURFACE AREA. THE POLLUTED GAS STREAM IS CHEMICALLY ABSORBED INTO THE LIQUID SCRUBBING SOLUTION THROUGH MASS TRANSFER.

2017 KCH ENGINEERED SYSTEMS NH-24.5 ROOF-MOUNTED ELIMINATOR CFM: 10,000 FAN RPM: 1,905 S/N: 31909 MIST ELIMINATORS ARE DESIGNED TO REMOVE CONTAMINANTS FROM PROCESS AIR EMISSIONS THAT EVOLVE AS MIST DROPLETS. THESE CONTAMINANTS CAN INCLUDE OIL MIST, MACHINE COOLANT MIST, CHROMIC ACID MIST, SULFURIC ACID MIST, AND OTHER ENTRAINED MIST.

1991 JESSUP CHROME #3 BLACK NICKLE PLATING LINE CONSISTING OF: (33) ASSORTED DIP TANKS, (2) LOAD/UNLOAD, (11) RINSE, (2) DRYERS, (1) HOT RO WATER RINSE, (1) FORMER RINSE, (1) FORMER RINSE (EMPTY), (1) FORMER RINSE (EMPTY), (1) FORMER CHROME DRAG OUT (EMPTY), (1) FORMER CHROME PLATE (EMPTY), (1) FORMER CHROME PREDIP (EMPTY), (1) R&D NISTAN, (1) R&D NISTAN RINSE, (1) PRE-ELECTRO CLEAN, (1) ELECTRO STRIP, (1) ACID ACTIVATOR, (1) NIGRAAX PLATE, (1) ACID ETCH (EMPTY), (1) FORMER RINSE (EMPTY), (1) ACID COPPER, (1) ACID COPPER RINSE, (1) ACID ETCH RINSE, (1) HEATED ACID ETCH, W/ ALL RELATED PUMPS, CATWALKS, CONVEYORS, MIXERS, RECTIFIERS, TRANSFORMERS, EXHAUST HOODS, ANCILLARY EQUIPMENT, ALL RELATED CONTROLS. THE TANKS ON ALL OF THE LINES ARE A COMBINATION OF POLY (PLASTIC), STAINLESS STEEL (S/S), CARBON STEEL (CS) & FIBERGLASS (FRB).

1979 UTILITE CHROME-NICKLE PLATING LINE CONSISTING OF: (22) ASSORTED DIP TANKS, (1) PRIMARY CLEANER, (1) SECONDARY CLEANER, (10) RINSE TANKS, (1) ACID ETCH TANK, (1) NICKLE STRIKE TANK, (1) BRIGHT NICKLE TANK, (1) CHROME PREDIP TANK, (1) CHROME PLATE TANK, (1) CHROME DRAG OUT TANK, (3) HOT RINSE TANKS, (1) DRYER WITH ALL RELATED PUMPS, CATWALKS, CONVEYORS, MIXERS, RECTIFIERS, TRANSFORMERS, EXHAUST HOODS, ANCILLARY EQUIPMENT, ALL RELATED CONTROLS. THE TANKS ON ALL OF THE LINES ARE A COMBINATION OF POLY (PLASTIC), STAINLESS STEEL (S/S), CARBON STEEL (CS) & FIBERGLASS (FRB).

1976 UTILITE CHROME PLATING LINE CONSISTING OF: (35) ASSORTED DIP TANKS, (1) ELECTRO STRIP, (26) RINSE, (1) SECONDARY CLEANER, (1) ELECTRO CLEANER, (1) ACID ACTIVATOR, (1) CHROME PRE-DIP, (1) CHROME PLATE, (1) CHROME DRAG OUT, (1) RACK STRIP, (1) DRYER W/ (2) LOAD / UNLOAD STATIONS, ASSOCIATED PUMPS, CATWALKS, CONVEYORS, MIXERS, RECTIFIERS, TRANSFORMERS, EXHAUST HOODS, ANCILLARY EQUIPMENT, ASSOCIATED RELATED CONTROLS. THE TANKS ON ALL OF THE LINES ARE A COMBINATION OF POLY (PLASTIC), STAINLESS STEEL (S/S), CARBON STEEL (CS) & FIBERGLASS (FRB). ALSO, KEEP IN MIND THAT WITH A FEW CHANGE-OUTS, EACH LINE CAN BE CONVERTED TO ANOTHER PROCESS (I.E. MAY BE CHROME NOW, BUT COULD BE CHANGED TO NICKEL, VICE-VERSA, OR OTHER COATINGS).

ROOF-MOUNTED SCRUBBER AN EXHAUST FAN FORCES OR INDUCES THE POLLUTED GAS STREAM THROUGH CORROSION RESISTANT DUCTWORK AND INTO THE WET SCRUBBER VESSEL, WHERE IT ENCOUNTERS LIQUID TO GAS CONTACT FROM THE SCRUBBING SOLUTION AND PACKING MEDIA WITH HIGH SURFACE AREA. THE POLLUTED GAS STREAM IS CHEMICALLY ABSORBED INTO THE LIQUID SCRUBBING SOLUTION THROUGH MASS TRANSFER.

2014 KCH ENGINEERED SYSTEMS NH-18.25 ROOF-MOUNTED SCRUBBER / SYSTEM #1 C.F.M 5,000 ROTATION: CLOCKWISE FAN RPM: 2,631 S/N: 30448. AN EXHAUST FAN FORCES OR INDUCES THE POLLUTED GAS STREAM THROUGH CORROSION RESISTANT DUCTWORK AND INTO THE WET SCRUBBER VESSEL, WHERE IT ENCOUNTERS LIQUID TO GAS CONTACT FROM THE SCRUBBING SOLUTION AND PACKING MEDIA WITH HIGH SURFACE AREA. THE POLLUTED GAS STREAM IS CHEMICALLY ABSORBED INTO THE LIQUID SCRUBBING SOLUTION THROUGH MASS TRANSFER.

SEW-EURODRIVE MOTOR, 0.25 HP. HORSE POWER: 0.25. FRAME SIZE: N/A. RPM: N/A. CAT/MODEL: N/A. NAME BRAND: SEW- EURODRIVE.

BALDOR MOTOR, 0.25 HP. HORSE POWER: 0.25. FRAME SIZE: N/A. RPM: N/A. CAT/MODEL: N/A. NAME BRAND: BALDOR.

BALDOR MOTOR, 0.25 HP. HORSE POWER: 0.25. FRAME SIZE: N/A. RPM: N/A. CAT/MODEL: N/A. NAME BRAND: BALDOR.

ASSORTED VIBRATORY FINISHER-POLISHER MEDIA (TUBS NOT INCLUDED).

LABCONCO FUME EXHAUST HOOD, 4' WIDE, BENCH TYPE

CO2 FIRE SUPPRESSION SYSTEM, W/ RELATED DUCTWORK AND CONTROLS

2017 KCH ENGINEERED SYSTEMS NH-36.5 ROOF- MOUNTED ELIMINATOR CFM: 24,886 FAN RPM: 1,326 S/N: 31909 MIST ELIMINATORS ARE DESIGNED TO REMOVE CONTAMINANTS FROM PROCESS AIR EMISSIONS THAT EVOLVE AS MIST DROPLETS. THESE CONTAMINANTS CAN INCLUDE OIL MIST, MACHINE COOLANT MIST, CHROMIC ACID MIST, SULFURIC ACID MIST, AND OTHER ENTRAINED MIST.

2006 PLATER #6 UTILITE BLACK NICKLE PLATING LINE CONSISTING OF: (14) ASSORTED DIP TANKS, (1) ELECTRO STRIP, (7) RINSE, (1) ACID ACTIVATOR, (1) ACID COPPER, (1) ACID ETCH, (1) BLACK NICKLE, (2) HOT RINSE, (1) DRYER UNIT, W/ ALL RELATED PUMPS, CATWALKS, CONVEYORS, MIXERS, RECTIFIERS, TRANSFORMERS, EXHAUST HOODS, ANCILLARY EQUIPMENT, ALL RELATED CONTROLS. THE TANKS ON ALL OF THE LINES ARE A COMBINATION OF POLY (PLASTIC), STAINLESS STEEL (S/S), CARBON STEEL (CS) & FIBERGLASS (FRB). ALSO, KEEP IN MIND THAT WITH A FEW CHANGE-OUTS, EACH LINE CAN BE CONVERTED TO ANOTHER PROCESS (I.E. MAY BE CHROME NOW, BUT COULD BE CHANGED TO NICKEL, VICE-VERSA, OR OTHER COATINGS).